From 4fe6be0fe0c8bec2fdeafe11e7202679cd68e0b2 Mon Sep 17 00:00:00 2001 From: Xiubo Li Date: Mon, 24 Nov 2014 17:17:24 +0800 Subject: ARM: ls1021a: dtsi: add 'big-endian' property for scfg node On LS1021A SoC, the scfg device is in BE mode. Signed-off-by: Xiubo Li Signed-off-by: Shawn Guo --- arch/arm/boot/dts/ls1021a.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 657da14cb4b5..c70bb27ac65a 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -142,6 +142,7 @@ scfg: scfg@1570000 { compatible = "fsl,ls1021a-scfg", "syscon"; reg = <0x0 0x1570000 0x0 0x10000>; + big-endian; }; clockgen: clocking@1ee1000 { -- cgit v1.2.3 From b2faf1a1aff945ec2abf2efdd9002c96b25378e8 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 28 Nov 2014 16:23:46 +0100 Subject: ARM: dts: imx6qdl: Fix CODA960 interrupt order Commit a04a0b6fed4f ("ARM: dts: imx6qdl: Enable CODA960 VPU") lost the fix for the CODA960 interrupt order during a rebase before being applied. This patch adds the missing bit and brings the interrupts and interrupt-names properties back in sync. Signed-off-by: Philipp Zabel Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 4fc03b7f1cee..2109d0763c1b 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -335,8 +335,8 @@ vpu: vpu@02040000 { compatible = "cnm,coda960"; reg = <0x02040000 0x3c000>; - interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>, - <0 12 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>, + <0 3 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "bit", "jpeg"; clocks = <&clks IMX6QDL_CLK_VPU_AXI>, <&clks IMX6QDL_CLK_MMDC_CH0_AXI>, -- cgit v1.2.3 From 81ef447950bf0955aca46f4a7617d8ce435cf0ce Mon Sep 17 00:00:00 2001 From: Gary Bisson Date: Wed, 3 Dec 2014 15:03:51 -0800 Subject: ARM: clk-imx6q: fix video divider for rev T0 1.0 The post dividers do not work on i.MX6Q rev T0 1.0 so they must be fixed to 1. As the table index was wrong, a divider a of 4 could still be requested which implied the clock not to be set properly. This is the root cause of the HDMI not working at high resolution on rev T0 1.0 of the SoC. Signed-off-by: Gary Bisson Cc: Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 5951660d1bd2..2daef619d053 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -144,7 +144,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) post_div_table[1].div = 1; post_div_table[2].div = 1; video_div_table[1].div = 1; - video_div_table[2].div = 1; + video_div_table[3].div = 1; } clk[IMX6QDL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); -- cgit v1.2.3 From 7a87e9cbc3a2f0ff0955815335e08c9862359130 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 5 Dec 2014 16:16:07 -0200 Subject: ARM: dts: imx25: Fix the SPI1 clocks From Documentation/devicetree/bindings/clock/imx25-clock.txt: cspi1_ipg 78 cspi2_ipg 79 cspi3_ipg 80 , so fix the SPI1 clocks accordingly to avoid a kernel hang when trying to access SPI1. Signed-off-by: Fabio Estevam Cc: Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx25.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 58d3c3cf2923..d238676a9107 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -162,7 +162,7 @@ #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; reg = <0x43fa4000 0x4000>; - clocks = <&clks 62>, <&clks 62>; + clocks = <&clks 78>, <&clks 78>; clock-names = "ipg", "per"; interrupts = <14>; status = "disabled"; -- cgit v1.2.3 From 7c168ed898931f6c3314d696e63cf993378ca192 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 16 Dec 2014 17:30:28 -0200 Subject: ARM: imx6sx: Set PLL2 as parent of QSPI clocks The default qspi2_clk_sel field of register CCM_CS2CDR contains '110' which is marked as 'reserved', so we can't rely on the default value. Provide a proper parent for QSPI clocks to avoid a kernel oops: [ 1.037920] Division by zero in kernel. [ 1.041807] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc7-next-20141204-00002-g5aa23e1 #2143 [ 1.050967] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 1.056853] Backtrace: [ 1.059360] [<80011ea0>] (dump_backtrace) from [<8001203c>] (show_stack+0x18/0x1c) [ 1.066982] r6:00000000 r5:00000000 r4:00000000 r3:00000000 [ 1.072754] [<80012024>] (show_stack) from [<806b7100>] (dump_stack+0x88/0xa4) [ 1.080038] [<806b7078>] (dump_stack) from [<80011d20>] (__div0+0x18/0x20) [ 1.086958] r5:be018500 r4:be017c00 [ 1.090600] [<80011d08>] (__div0) from [<802aa418>] (Ldiv0+0x8/0x10) [ 1.097012] [<80504fbc>] (clk_divider_set_rate) from [<80503ddc>] (clk_change_rate+0x14c/0x17c) [ 1.105759] r7:00000000 r6:00000000 r5:be018500 r4:00000000 [ 1.111516] [<80503c90>] (clk_change_rate) from [<80503ea0>] (clk_set_rate+0x94/0x98) [ 1.119391] r8:be7e0368 r7:00000000 r6:be11a000 r5:be018500 r4:00000000 r3:00000000 [ 1.127290] [<80503e0c>] (clk_set_rate) from [<80410558>] (fsl_qspi_probe+0x23c/0x75c) [ 1.135260] r5:be11a010 r4:be350010 [ 1.138900] [<8041031c>] (fsl_qspi_probe) from [<80385a18>] (platform_drv_probe+0x50/0xac) Signed-off-by: Fabio Estevam Cc: Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6sx.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-imx/clk-imx6sx.c b/arch/arm/mach-imx/clk-imx6sx.c index 17354a11356f..5a3e5a159e70 100644 --- a/arch/arm/mach-imx/clk-imx6sx.c +++ b/arch/arm/mach-imx/clk-imx6sx.c @@ -558,6 +558,9 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) clk_set_parent(clks[IMX6SX_CLK_GPU_CORE_SEL], clks[IMX6SX_CLK_PLL3_PFD0]); clk_set_parent(clks[IMX6SX_CLK_GPU_AXI_SEL], clks[IMX6SX_CLK_PLL3_PFD0]); + clk_set_parent(clks[IMX6SX_CLK_QSPI1_SEL], clks[IMX6SX_CLK_PLL2_BUS]); + clk_set_parent(clks[IMX6SX_CLK_QSPI2_SEL], clks[IMX6SX_CLK_PLL2_BUS]); + /* Set initial power mode */ imx6q_set_lpm(WAIT_CLOCKED); } -- cgit v1.2.3 From 7a9f0604bd56936b2b18f49824e0e392dc7878c3 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 5 Jan 2015 15:19:08 -0200 Subject: ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling GPIO2_5 is the reset GPIO for the USB3317 ULPI PHY. Instead of modelling it as a regulator, the correct approach is to use the 'reset_gpios' property of the "usb-nop-xceiv" node. GPIO1_7 is the reset GPIO for the USB2517 USB hub. As we currently don't have dt bindings to describe a HUB reset, let's keep using the regulator approach. Rename the regulator to 'reg_hub_reset' to better describe its function and bind it with the USB host1 port instead. USB host support has been introduced by commit 9bf206a9d13be3 ("ARM: dts: imx51-babbage: Add USB Host1 support"), which landed in 3.16 and it seems that USB has only been functional due to previous bootloader initialization. With this patch applied we can get USB host to work without relying on the bootloader. Cc: # 3.16+ Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx51-babbage.dts | 22 +++++----------------- 1 file changed, 5 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 56569cecaa78..649befeb2cf9 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -127,24 +127,12 @@ #address-cells = <1>; #size-cells = <0>; - reg_usbh1_vbus: regulator@0 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1reg>; - reg = <0>; - regulator-name = "usbh1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usbotg_vbus: regulator@1 { + reg_hub_reset: regulator@0 { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotgreg>; - reg = <1>; - regulator-name = "usbotg_vbus"; + reg = <0>; + regulator-name = "hub_reset"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; @@ -176,6 +164,7 @@ reg = <0>; clocks = <&clks IMX5_CLK_DUMMY>; clock-names = "main_clk"; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; }; }; }; @@ -419,7 +408,7 @@ &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; - vbus-supply = <®_usbh1_vbus>; + vbus-supply = <®_hub_reset>; fsl,usbphy = <&usbh1phy>; phy_type = "ulpi"; status = "okay"; @@ -429,7 +418,6 @@ dr_mode = "otg"; disable-over-current; phy_type = "utmi_wide"; - vbus-supply = <®_usbotg_vbus>; status = "okay"; }; -- cgit v1.2.3