From e4362d1e64ff6da64118dcf74ff450cd0a029deb Mon Sep 17 00:00:00 2001 From: Alex Smith Date: Tue, 21 Jan 2014 11:22:35 +0000 Subject: MIPS: Fix possible build error with transparent hugepages enabled If CONFIG_TRANSPARENT_HUGEPAGE is enabled, but CONFIG_HUGETLB_PAGE is not, it is possible to end up with a configuration that fails to build with the following error: include/linux/huge_mm.h:125:2: error: #error "hugepages can't be allocated by the buddy allocator" This is due to CONFIG_FORCE_MAX_ZONEORDER defaulting to 11. It already has ranges that change the valid values when HUGETLB_PAGE is enabled, but this is not done for TRANSPARENT_HUGEPAGE. Fix by changing the HUGETLB_PAGE dependencies to MIPS_HUGE_TLB_SUPPORT, which includes both TRANSPARENT_HUGEPAGE and HUGETLB_PAGE. Signed-off-by: Alex Smith Reviewed-by: Markos Chandras Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6391/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 153447452d5e..95fa1f1d5c8b 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1776,12 +1776,12 @@ endchoice config FORCE_MAX_ZONEORDER int "Maximum zone order" - range 14 64 if HUGETLB_PAGE && PAGE_SIZE_64KB - default "14" if HUGETLB_PAGE && PAGE_SIZE_64KB - range 13 64 if HUGETLB_PAGE && PAGE_SIZE_32KB - default "13" if HUGETLB_PAGE && PAGE_SIZE_32KB - range 12 64 if HUGETLB_PAGE && PAGE_SIZE_16KB - default "12" if HUGETLB_PAGE && PAGE_SIZE_16KB + range 14 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB + default "14" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB + range 13 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB + default "13" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB + range 12 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB + default "12" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB range 11 64 default "11" help -- cgit v1.2.3 From 4fe2169acecb6e62821dfe14bc5c5852870b516f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Thu, 13 Feb 2014 17:48:12 +0100 Subject: MIPS: BCM47XX: Check all (32) GPIOs when looking for a pin MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Broadcom boards support 32 GPIOs and NVRAM may have entires for higher ones too. Example: gpio23=wombo_reset Signed-off-by: Rafa? Mi?ecki Acked-by: Hauke Mehrtens Cc: linux-mips@linux-mips.org Cc: Rafał Miłecki Patchwork: https://patchwork.linux-mips.org/patch/6547/ Signed-off-by: Ralf Baechle --- arch/mips/bcm47xx/nvram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c index 6decb27cf48b..2bed73a684ae 100644 --- a/arch/mips/bcm47xx/nvram.c +++ b/arch/mips/bcm47xx/nvram.c @@ -196,7 +196,7 @@ int bcm47xx_nvram_gpio_pin(const char *name) char nvram_var[10]; char buf[30]; - for (i = 0; i < 16; i++) { + for (i = 0; i < 32; i++) { err = snprintf(nvram_var, sizeof(nvram_var), "gpio%i", i); if (err <= 0) continue; -- cgit v1.2.3 From b08ac66b4026f0151d712903695bf266042fbe2c Mon Sep 17 00:00:00 2001 From: Viller Hsiao Date: Tue, 18 Mar 2014 15:39:34 +0800 Subject: MIPS: ftrace: Tweak safe_load()/safe_store() macros Due to name collision in ftrace safe_load and safe_store macros, these macros cannot take expressions as operands. For example, compiler will complain for a macro call like the following: safe_store_code(new_code2, ip + 4, faulted); arch/mips/include/asm/ftrace.h:61:6: note: in definition of macro 'safe_store' : [dst] "r" (dst), [src] "r" (src)\ ^ arch/mips/kernel/ftrace.c:118:2: note: in expansion of macro 'safe_store_code' safe_store_code(new_code2, ip + 4, faulted); ^ arch/mips/kernel/ftrace.c:118:32: error: undefined named operand 'ip + 4' safe_store_code(new_code2, ip + 4, faulted); ^ arch/mips/include/asm/ftrace.h:61:6: note: in definition of macro 'safe_store' : [dst] "r" (dst), [src] "r" (src)\ ^ arch/mips/kernel/ftrace.c:118:2: note: in expansion of macro 'safe_store_code' safe_store_code(new_code2, ip + 4, faulted); ^ This build error is triggered by a4671094 [MIPS: ftrace: Fix icache flush range error]. Tweak variable naming in those macros to allow flexible operands. Signed-off-by: Viller Hsiao Cc: linux-mips@linux-mips.org Cc: rostedt@goodmis.org Cc: fweisbec@gmail.com Cc: mingo@redhat.com Cc: Qais.Yousef@imgtec.com Patchwork: https://patchwork.linux-mips.org/patch/6622/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/ftrace.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/ftrace.h b/arch/mips/include/asm/ftrace.h index ce35c9af0c28..992aaba603b5 100644 --- a/arch/mips/include/asm/ftrace.h +++ b/arch/mips/include/asm/ftrace.h @@ -22,12 +22,12 @@ extern void _mcount(void); #define safe_load(load, src, dst, error) \ do { \ asm volatile ( \ - "1: " load " %[" STR(dst) "], 0(%[" STR(src) "])\n"\ - " li %[" STR(error) "], 0\n" \ + "1: " load " %[tmp_dst], 0(%[tmp_src])\n" \ + " li %[tmp_err], 0\n" \ "2:\n" \ \ ".section .fixup, \"ax\"\n" \ - "3: li %[" STR(error) "], 1\n" \ + "3: li %[tmp_err], 1\n" \ " j 2b\n" \ ".previous\n" \ \ @@ -35,8 +35,8 @@ do { \ STR(PTR) "\t1b, 3b\n\t" \ ".previous\n" \ \ - : [dst] "=&r" (dst), [error] "=r" (error)\ - : [src] "r" (src) \ + : [tmp_dst] "=&r" (dst), [tmp_err] "=r" (error)\ + : [tmp_src] "r" (src) \ : "memory" \ ); \ } while (0) @@ -44,12 +44,12 @@ do { \ #define safe_store(store, src, dst, error) \ do { \ asm volatile ( \ - "1: " store " %[" STR(src) "], 0(%[" STR(dst) "])\n"\ - " li %[" STR(error) "], 0\n" \ + "1: " store " %[tmp_src], 0(%[tmp_dst])\n"\ + " li %[tmp_err], 0\n" \ "2:\n" \ \ ".section .fixup, \"ax\"\n" \ - "3: li %[" STR(error) "], 1\n" \ + "3: li %[tmp_err], 1\n" \ " j 2b\n" \ ".previous\n" \ \ @@ -57,8 +57,8 @@ do { \ STR(PTR) "\t1b, 3b\n\t" \ ".previous\n" \ \ - : [error] "=r" (error) \ - : [dst] "r" (dst), [src] "r" (src)\ + : [tmp_err] "=r" (error) \ + : [tmp_dst] "r" (dst), [tmp_src] "r" (src)\ : "memory" \ ); \ } while (0) -- cgit v1.2.3 From 2eddb708d83ead02b5d41c65bfb26bab5afc8210 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Wed, 19 Mar 2014 23:03:30 +0100 Subject: MIPS: Octeon: Fix warning in of_device_alloc on cn3xxx Starting with commit 3da5278727a895d49a601f67fd49dffa0b80f9a5 (of/irq: Rework of_irq_count()) the following warning is triggered on octeon cn3xxx: [ 0.887281] WARNING: CPU: 0 PID: 1 at drivers/of/platform.c:171 of_device_alloc+0x228/0x230() [ 0.895642] Modules linked in: [ 0.898689] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc7-00012-g9ae51f2-dirty #41 [ 0.906860] Stack : c8b439581166d96e ffffffff816b0000 0000000040808000 ffffffff81185ddc [ 0.906860] 0000000000000000 0000000000000000 0000000000000000 000000000000000b [ 0.906860] 000000000000000a 000000000000000a 0000000000000000 0000000000000000 [ 0.906860] ffffffff81740000 ffffffff81720000 ffffffff81615900 ffffffff816b0177 [ 0.906860] ffffffff81727d10 800000041f868fb0 0000000000000001 0000000000000000 [ 0.906860] 0000000000000000 0000000000000038 0000000000000001 ffffffff81568484 [ 0.906860] 800000041f86faa8 ffffffff81145ddc 0000000000000000 ffffffff811873f4 [ 0.906860] 800000041f868b88 800000041f86f9c0 0000000000000000 ffffffff81569c9c [ 0.906860] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 0.906860] 0000000000000000 ffffffff811205e0 0000000000000000 0000000000000000 [ 0.906860] ... [ 0.971695] Call Trace: [ 0.974139] [] show_stack+0x68/0x80 [ 0.979183] [] dump_stack+0x8c/0xe0 [ 0.984196] [] warn_slowpath_common+0x84/0xb8 [ 0.990110] [] of_device_alloc+0x228/0x230 [ 0.995726] [] of_platform_device_create_pdata+0x48/0xd0 [ 1.002593] [] of_platform_bus_create+0x134/0x1e8 [ 1.008837] [] of_platform_bus_create+0x198/0x1e8 [ 1.015064] [] of_platform_bus_probe+0xa4/0x100 [ 1.021149] [] do_one_initcall+0xd8/0x128 [ 1.026701] [] kernel_init_freeable+0x144/0x210 [ 1.032753] [] kernel_init+0x14/0x110 [ 1.037973] [] ret_from_kernel_thread+0x14/0x1c With this commit the kernel starts mapping the interrupts listed for gpio-controller node. irq_domain_ops for CIU (octeon_irq_ciu_map and octeon_irq_ciu_xlat) refuse to handle the GPIO lines (returning -EINVAL) and this is causing above warning in of_device_alloc(). Modify irq_domain_ops for CIU and CIU2 to "gracefully handle" GPIO lines (neither return error code nor call octeon_irq_set_ciu_mapping for it). This should avoid the warning. (As before the real setup for GPIO lines will happen using irq_domain_ops of gpio-controller.) This patch is based on Wei's patch v2 (see http://marc.info/?l=linux-mips&m=139511814813247). Signed-off-by: Andreas Herrmann Reported-by: Yang Wei Acked-by: David Daney Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6624/ Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/octeon-irq.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 25fbfae06c1f..c2bb4f896ce7 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -975,10 +975,6 @@ static int octeon_irq_ciu_xlat(struct irq_domain *d, if (ciu > 1 || bit > 63) return -EINVAL; - /* These are the GPIO lines */ - if (ciu == 0 && bit >= 16 && bit < 32) - return -EINVAL; - *out_hwirq = (ciu << 6) | bit; *out_type = 0; @@ -1007,6 +1003,10 @@ static int octeon_irq_ciu_map(struct irq_domain *d, if (!octeon_irq_virq_in_range(virq)) return -EINVAL; + /* Don't map irq if it is reserved for GPIO. */ + if (line == 0 && bit >= 16 && bit <32) + return 0; + if (line > 1 || octeon_irq_ciu_to_irq[line][bit] != 0) return -EINVAL; @@ -1525,10 +1525,6 @@ static int octeon_irq_ciu2_xlat(struct irq_domain *d, ciu = intspec[0]; bit = intspec[1]; - /* Line 7 are the GPIO lines */ - if (ciu > 6 || bit > 63) - return -EINVAL; - *out_hwirq = (ciu << 6) | bit; *out_type = 0; @@ -1570,8 +1566,14 @@ static int octeon_irq_ciu2_map(struct irq_domain *d, if (!octeon_irq_virq_in_range(virq)) return -EINVAL; - /* Line 7 are the GPIO lines */ - if (line > 6 || octeon_irq_ciu_to_irq[line][bit] != 0) + /* + * Don't map irq if it is reserved for GPIO. + * (Line 7 are the GPIO lines.) + */ + if (line == 7) + return 0; + + if (line > 7 || octeon_irq_ciu_to_irq[line][bit] != 0) return -EINVAL; if (octeon_irq_ciu2_is_edge(line, bit)) -- cgit v1.2.3 From 71ca75888953166b72cf7a65b4c2b6a50fc0ce3b Mon Sep 17 00:00:00 2001 From: Jim Quinlan Date: Wed, 27 Nov 2013 15:34:50 -0500 Subject: MIPS: Make local_irq_disable macro safe for non-Mipsr2 For non-mipsr2 processors, the local_irq_disable contains an mfc0-mtc0 pair with instructions inbetween. With preemption enabled, this sequence may get preempted and effect a stale value of CP0_STATUS when executing the mtc0 instruction. This commit avoids this scenario by incrementing the preempt count before the mfc0 and decrementing it after the mtc9. [ralf@linux-mips.org: This patch is sorting out the part that were missed by e97c5b6098 [MIPS: Make irqflags.h functions preempt-safe for non-mipsr2 cpus.] I also re-enabled the inclusion of at the top of ]. Signed-off-by: Jim Quinlan Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/6164/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/asmmacro.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h index 69a9a22d014a..4225e99bd7bf 100644 --- a/arch/mips/include/asm/asmmacro.h +++ b/arch/mips/include/asm/asmmacro.h @@ -9,6 +9,7 @@ #define _ASM_ASMMACRO_H #include +#include #ifdef CONFIG_32BIT #include @@ -54,11 +55,21 @@ .endm .macro local_irq_disable reg=t0 +#ifdef CONFIG_PREEMPT + lw \reg, TI_PRE_COUNT($28) + addi \reg, \reg, 1 + sw \reg, TI_PRE_COUNT($28) +#endif mfc0 \reg, CP0_STATUS ori \reg, \reg, 1 xori \reg, \reg, 1 mtc0 \reg, CP0_STATUS irq_disable_hazard +#ifdef CONFIG_PREEMPT + lw \reg, TI_PRE_COUNT($28) + addi \reg, \reg, -1 + sw \reg, TI_PRE_COUNT($28) +#endif .endm #endif /* CONFIG_MIPS_MT_SMTC */ -- cgit v1.2.3