From c65d2359a85da9a09768c75ea6b9ed6254a7df71 Mon Sep 17 00:00:00 2001 From: Karsten Merker Date: Sat, 24 Oct 2015 23:07:31 +0200 Subject: ARM: dts: sunxi: sun6i-a31s-primo81.dts: add touchscreen axis swapping property The MSI Primo81 has a display in portrait mode but a touchscreen in landscape mode. To have both of them use the same coordinate system, the touchscreen-swapped-x-y property has to be set for the touchscreen. Signed-off-by: Karsten Merker Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31s-primo81.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 2d4250b1faf8..68b479b8772c 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -83,6 +83,7 @@ reg = <0x5d>; interrupt-parent = <&pio>; interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */ + touchscreen-swapped-x-y; }; }; -- cgit v1.2.3 From de0afc9bdeeadaa998797d2333c754bf9f4d5dcf Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Wed, 2 Dec 2015 12:10:48 -0500 Subject: xen: Resume PMU from non-atomic context Resuming PMU currently triggers a warning from ___might_sleep() (assuming CONFIG_DEBUG_ATOMIC_SLEEP is set) when xen_pmu_init() allocates GFP_KERNEL page because we are in state resembling atomic context. Move resuming PMU to xen_arch_resume() which is called in regular context. For symmetry move suspending PMU to xen_arch_suspend() as well. Signed-off-by: Boris Ostrovsky Reported-by: Konrad Rzeszutek Wilk Cc: # 4.3 Signed-off-by: David Vrabel --- arch/x86/xen/suspend.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index feddabdab448..3705eabd7e22 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -68,26 +68,16 @@ static void xen_pv_post_suspend(int suspend_cancelled) void xen_arch_pre_suspend(void) { - int cpu; - - for_each_online_cpu(cpu) - xen_pmu_finish(cpu); - if (xen_pv_domain()) xen_pv_pre_suspend(); } void xen_arch_post_suspend(int cancelled) { - int cpu; - if (xen_pv_domain()) xen_pv_post_suspend(cancelled); else xen_hvm_post_suspend(cancelled); - - for_each_online_cpu(cpu) - xen_pmu_init(cpu); } static void xen_vcpu_notify_restore(void *data) @@ -106,10 +96,20 @@ static void xen_vcpu_notify_suspend(void *data) void xen_arch_resume(void) { + int cpu; + on_each_cpu(xen_vcpu_notify_restore, NULL, 1); + + for_each_online_cpu(cpu) + xen_pmu_init(cpu); } void xen_arch_suspend(void) { + int cpu; + + for_each_online_cpu(cpu) + xen_pmu_finish(cpu); + on_each_cpu(xen_vcpu_notify_suspend, NULL, 1); } -- cgit v1.2.3 From 40ee068ec09b2d98162da5ea18b7c6fdbaa2bb71 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 2 Dec 2015 14:31:25 +0100 Subject: ARM: 8465/1: mm: keep reserved ASIDs in sync with mm after multiple rollovers Under some unusual context-switching patterns, it is possible to end up with multiple threads from the same mm running concurrently with different ASIDs: 1. CPU x schedules task t with mm p containing ASID a and generation g This task doesn't block and the CPU doesn't context switch. So: * per_cpu(active_asid, x) = {g,a} * p->context.id = {g,a} 2. Some other CPU generates an ASID rollover. The global generation is now (g + 1). CPU x is still running t, with no context switch and so per_cpu(reserved_asid, x) = {g,a} 3. CPU y schedules task t', which shares mm p with t. The generation mismatches, so we take the slowpath and hit the reserved ASID from CPU x. p is then updated so that p->context.id = {g + 1,a} 4. CPU y schedules some other task u, which has an mm != p. 5. Some other CPU generates *another* CPU rollover. The global generation is now (g + 2). CPU x is still running t, with no context switch and so per_cpu(reserved_asid, x) = {g,a}. 6. CPU y once again schedules task t', but now *fails* to hit the reserved ASID from CPU x because of the generation mismatch. This results in a new ASID being allocated, despite the fact that t is still running on CPU x with the same mm. Consequently, TLBIs (e.g. as a result of CoW) will not be synchronised between the two threads. This patch fixes the problem by updating all of the matching reserved ASIDs when we hit on the slowpath (i.e. in step 3 above). This keeps the reserved ASIDs in-sync with the mm and avoids the problem. Cc: Reported-by: Tony Thompson Reviewed-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/context.c | 38 ++++++++++++++++++++++++++------------ 1 file changed, 26 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 845769e41332..c8c8b9ed02e0 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -165,13 +165,28 @@ static void flush_context(unsigned int cpu) __flush_icache_all(); } -static int is_reserved_asid(u64 asid) +static bool check_update_reserved_asid(u64 asid, u64 newasid) { int cpu; - for_each_possible_cpu(cpu) - if (per_cpu(reserved_asids, cpu) == asid) - return 1; - return 0; + bool hit = false; + + /* + * Iterate over the set of reserved ASIDs looking for a match. + * If we find one, then we can update our mm to use newasid + * (i.e. the same ASID in the current generation) but we can't + * exit the loop early, since we need to ensure that all copies + * of the old ASID are updated to reflect the mm. Failure to do + * so could result in us missing the reserved ASID in a future + * generation. + */ + for_each_possible_cpu(cpu) { + if (per_cpu(reserved_asids, cpu) == asid) { + hit = true; + per_cpu(reserved_asids, cpu) = newasid; + } + } + + return hit; } static u64 new_context(struct mm_struct *mm, unsigned int cpu) @@ -181,12 +196,14 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu) u64 generation = atomic64_read(&asid_generation); if (asid != 0) { + u64 newasid = generation | (asid & ~ASID_MASK); + /* * If our current ASID was active during a rollover, we * can continue to use it and this was just a false alarm. */ - if (is_reserved_asid(asid)) - return generation | (asid & ~ASID_MASK); + if (check_update_reserved_asid(asid, newasid)) + return newasid; /* * We had a valid ASID in a previous life, so try to re-use @@ -194,7 +211,7 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu) */ asid &= ~ASID_MASK; if (!__test_and_set_bit(asid, asid_map)) - goto bump_gen; + return newasid; } /* @@ -216,11 +233,8 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu) __set_bit(asid, asid_map); cur_idx = asid; - -bump_gen: - asid |= generation; cpumask_clear(mm_cpumask(mm)); - return asid; + return asid | generation; } void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk) -- cgit v1.2.3 From 08925c2f124f1bac6152a8b234268f9874fc70a5 Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Mon, 30 Nov 2015 19:36:28 +0100 Subject: ARM: 8464/1: Update all mm structures with section adjustments Currently, when updating section permissions to mark areas RO or NX, the only mm updated is current->mm. This is working off the assumption that there are no additional mm structures at the time. This may not always hold true. (Example: calling modprobe early will trigger a fork/exec). Ensure all mm structres get updated with the new section information. Reviewed-by: Kees Cook Signed-off-by: Laura Abbott Signed-off-by: Russell King --- arch/arm/mm/init.c | 92 ++++++++++++++++++++++++++++++++++++------------------ 1 file changed, 62 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 8a63b4cdc0f2..7f8cd1b3557f 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -627,12 +628,10 @@ static struct section_perm ro_perms[] = { * safe to be called with preemption disabled, as under stop_machine(). */ static inline void section_update(unsigned long addr, pmdval_t mask, - pmdval_t prot) + pmdval_t prot, struct mm_struct *mm) { - struct mm_struct *mm; pmd_t *pmd; - mm = current->active_mm; pmd = pmd_offset(pud_offset(pgd_offset(mm, addr), addr), addr); #ifdef CONFIG_ARM_LPAE @@ -656,49 +655,82 @@ static inline bool arch_has_strict_perms(void) return !!(get_cr() & CR_XP); } -#define set_section_perms(perms, field) { \ - size_t i; \ - unsigned long addr; \ - \ - if (!arch_has_strict_perms()) \ - return; \ - \ - for (i = 0; i < ARRAY_SIZE(perms); i++) { \ - if (!IS_ALIGNED(perms[i].start, SECTION_SIZE) || \ - !IS_ALIGNED(perms[i].end, SECTION_SIZE)) { \ - pr_err("BUG: section %lx-%lx not aligned to %lx\n", \ - perms[i].start, perms[i].end, \ - SECTION_SIZE); \ - continue; \ - } \ - \ - for (addr = perms[i].start; \ - addr < perms[i].end; \ - addr += SECTION_SIZE) \ - section_update(addr, perms[i].mask, \ - perms[i].field); \ - } \ +void set_section_perms(struct section_perm *perms, int n, bool set, + struct mm_struct *mm) +{ + size_t i; + unsigned long addr; + + if (!arch_has_strict_perms()) + return; + + for (i = 0; i < n; i++) { + if (!IS_ALIGNED(perms[i].start, SECTION_SIZE) || + !IS_ALIGNED(perms[i].end, SECTION_SIZE)) { + pr_err("BUG: section %lx-%lx not aligned to %lx\n", + perms[i].start, perms[i].end, + SECTION_SIZE); + continue; + } + + for (addr = perms[i].start; + addr < perms[i].end; + addr += SECTION_SIZE) + section_update(addr, perms[i].mask, + set ? perms[i].prot : perms[i].clear, mm); + } + } -static inline void fix_kernmem_perms(void) +static void update_sections_early(struct section_perm perms[], int n) { - set_section_perms(nx_perms, prot); + struct task_struct *t, *s; + + read_lock(&tasklist_lock); + for_each_process(t) { + if (t->flags & PF_KTHREAD) + continue; + for_each_thread(t, s) + set_section_perms(perms, n, true, s->mm); + } + read_unlock(&tasklist_lock); + set_section_perms(perms, n, true, current->active_mm); + set_section_perms(perms, n, true, &init_mm); +} + +int __fix_kernmem_perms(void *unused) +{ + update_sections_early(nx_perms, ARRAY_SIZE(nx_perms)); + return 0; +} + +void fix_kernmem_perms(void) +{ + stop_machine(__fix_kernmem_perms, NULL, NULL); } #ifdef CONFIG_DEBUG_RODATA +int __mark_rodata_ro(void *unused) +{ + update_sections_early(ro_perms, ARRAY_SIZE(ro_perms)); + return 0; +} + void mark_rodata_ro(void) { - set_section_perms(ro_perms, prot); + stop_machine(__mark_rodata_ro, NULL, NULL); } void set_kernel_text_rw(void) { - set_section_perms(ro_perms, clear); + set_section_perms(ro_perms, ARRAY_SIZE(ro_perms), false, + current->active_mm); } void set_kernel_text_ro(void) { - set_section_perms(ro_perms, prot); + set_section_perms(ro_perms, ARRAY_SIZE(ro_perms), true, + current->active_mm); } #endif /* CONFIG_DEBUG_RODATA */ -- cgit v1.2.3 From 77f1b959b0b6db7a7941b4b4f9d3d287c67d7c15 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 3 Dec 2015 14:34:45 +0000 Subject: ARM: report proper DACR value in oops dumps When printing the DACR value, we print the domain register value. This is incorrect, as with SW_PAN enabled, that is the current setting, rather than the faulting context's setting. Arrange to print the faulting domain's saved DACR value instead. Signed-off-by: Russell King --- arch/arm/kernel/process.c | 33 ++++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 7a7c4cea5523..4adfb46e3ee9 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -95,6 +95,22 @@ void __show_regs(struct pt_regs *regs) { unsigned long flags; char buf[64]; +#ifndef CONFIG_CPU_V7M + unsigned int domain; +#ifdef CONFIG_CPU_SW_DOMAIN_PAN + /* + * Get the domain register for the parent context. In user + * mode, we don't save the DACR, so lets use what it should + * be. For other modes, we place it after the pt_regs struct. + */ + if (user_mode(regs)) + domain = DACR_UACCESS_ENABLE; + else + domain = *(unsigned int *)(regs + 1); +#else + domain = get_domain(); +#endif +#endif show_regs_print_info(KERN_DEFAULT); @@ -123,21 +139,8 @@ void __show_regs(struct pt_regs *regs) #ifndef CONFIG_CPU_V7M { - unsigned int domain = get_domain(); const char *segment; -#ifdef CONFIG_CPU_SW_DOMAIN_PAN - /* - * Get the domain register for the parent context. In user - * mode, we don't save the DACR, so lets use what it should - * be. For other modes, we place it after the pt_regs struct. - */ - if (user_mode(regs)) - domain = DACR_UACCESS_ENABLE; - else - domain = *(unsigned int *)(regs + 1); -#endif - if ((domain & domain_mask(DOMAIN_USER)) == domain_val(DOMAIN_USER, DOMAIN_NOACCESS)) segment = "none"; @@ -163,11 +166,11 @@ void __show_regs(struct pt_regs *regs) buf[0] = '\0'; #ifdef CONFIG_CPU_CP15_MMU { - unsigned int transbase, dac = get_domain(); + unsigned int transbase; asm("mrc p15, 0, %0, c2, c0\n\t" : "=r" (transbase)); snprintf(buf, sizeof(buf), " Table: %08x DAC: %08x", - transbase, dac); + transbase, domain); } #endif asm("mrc p15, 0, %0, c1, c0\n" : "=r" (ctrl)); -- cgit v1.2.3 From 6d1a2adef782d26113d4f18a617ccb33c4774d54 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Mon, 7 Dec 2015 14:21:37 +0300 Subject: ARC: [axs10x] cap ethernet phy to 100 Mbit/sec Current ARC SDP boards cannot reliably handle 1Gbit Ethernet connections due to limitations in hardware. To make sure networking is stable on the board we're limiting phy to 100 Mbit. Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta --- arch/arc/boot/dts/axs10x_mb.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi index f3db32154973..44a578c10732 100644 --- a/arch/arc/boot/dts/axs10x_mb.dtsi +++ b/arch/arc/boot/dts/axs10x_mb.dtsi @@ -46,6 +46,7 @@ snps,pbl = < 32 >; clocks = <&apbclk>; clock-names = "stmmaceth"; + max-speed = <100>; }; ehci@0x40000 { -- cgit v1.2.3 From c20875a3e638e4a03e099b343ec798edd1af5cc6 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 12 Nov 2015 16:43:02 +1100 Subject: KVM: PPC: Book3S HV: Prohibit setting illegal transaction state in MSR Currently it is possible for userspace (e.g. QEMU) to set a value for the MSR for a guest VCPU which has both of the TS bits set, which is an illegal combination. The result of this is that when we execute a hrfid (hypervisor return from interrupt doubleword) instruction to enter the guest, the CPU will take a TM Bad Thing type of program interrupt (vector 0x700). Now, if PR KVM is configured in the kernel along with HV KVM, we actually handle this without crashing the host or giving hypervisor privilege to the guest; instead what happens is that we deliver a program interrupt to the guest, with SRR0 reflecting the address of the hrfid instruction and SRR1 containing the MSR value at that point. If PR KVM is not configured in the kernel, then we try to run the host's program interrupt handler with the MMU set to the guest context, which almost certainly causes a host crash. This closes the hole by making kvmppc_set_msr_hv() check for the illegal combination and force the TS field to a safe value (00, meaning non-transactional). Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Paul Mackerras --- arch/powerpc/kvm/book3s_hv.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 54b45b73195f..a7352b59e6f9 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -224,6 +224,12 @@ static void kvmppc_core_vcpu_put_hv(struct kvm_vcpu *vcpu) static void kvmppc_set_msr_hv(struct kvm_vcpu *vcpu, u64 msr) { + /* + * Check for illegal transactional state bit combination + * and if we find it, force the TS field to a safe state. + */ + if ((msr & MSR_TS_MASK) == MSR_TS_MASK) + msr &= ~MSR_TS_MASK; vcpu->arch.shregs.msr = msr; kvmppc_end_cede(vcpu); } -- cgit v1.2.3 From 8b89fe1f6c430589122542f228a802d34995bebd Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 10 Dec 2015 18:37:32 +0100 Subject: kvm: x86: move tracepoints outside extended quiescent state Invoking tracepoints within kvm_guest_enter/kvm_guest_exit causes a lockdep splat. Reported-by: Borislav Petkov Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm.c | 4 ++-- arch/x86/kvm/vmx.c | 3 ++- arch/x86/kvm/x86.c | 4 ++-- 3 files changed, 6 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 83a1c643f9a5..899c40f826dd 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -3422,6 +3422,8 @@ static int handle_exit(struct kvm_vcpu *vcpu) struct kvm_run *kvm_run = vcpu->run; u32 exit_code = svm->vmcb->control.exit_code; + trace_kvm_exit(exit_code, vcpu, KVM_ISA_SVM); + if (!is_cr_intercept(svm, INTERCEPT_CR0_WRITE)) vcpu->arch.cr0 = svm->vmcb->save.cr0; if (npt_enabled) @@ -3892,8 +3894,6 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu) vcpu->arch.regs[VCPU_REGS_RSP] = svm->vmcb->save.rsp; vcpu->arch.regs[VCPU_REGS_RIP] = svm->vmcb->save.rip; - trace_kvm_exit(svm->vmcb->control.exit_code, vcpu, KVM_ISA_SVM); - if (unlikely(svm->vmcb->control.exit_code == SVM_EXIT_NMI)) kvm_before_handle_nmi(&svm->vcpu); diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index af823a388c19..6b5605607849 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -8042,6 +8042,8 @@ static int vmx_handle_exit(struct kvm_vcpu *vcpu) u32 exit_reason = vmx->exit_reason; u32 vectoring_info = vmx->idt_vectoring_info; + trace_kvm_exit(exit_reason, vcpu, KVM_ISA_VMX); + /* * Flush logged GPAs PML buffer, this will make dirty_bitmap more * updated. Another good is, in kvm_vm_ioctl_get_dirty_log, before @@ -8668,7 +8670,6 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu) vmx->loaded_vmcs->launched = 1; vmx->exit_reason = vmcs_read32(VM_EXIT_REASON); - trace_kvm_exit(vmx->exit_reason, vcpu, KVM_ISA_VMX); /* * the KVM_REQ_EVENT optimization bit is only on for one entry, and if diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index eed32283d22c..b84ba4b17757 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6515,6 +6515,8 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu) if (req_immediate_exit) smp_send_reschedule(vcpu->cpu); + trace_kvm_entry(vcpu->vcpu_id); + wait_lapic_expire(vcpu); __kvm_guest_enter(); if (unlikely(vcpu->arch.switch_db_regs)) { @@ -6527,8 +6529,6 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu) vcpu->arch.switch_db_regs &= ~KVM_DEBUGREG_RELOAD; } - trace_kvm_entry(vcpu->vcpu_id); - wait_lapic_expire(vcpu); kvm_x86_ops->run(vcpu); /* -- cgit v1.2.3 From 8eb0984bf4fe82237f95481ff0afe514a676c717 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 11 Dec 2015 15:54:03 +0530 Subject: ARCv2: intc: Fix random perf irq disabling in SMP setup As part of fixing another perf issue, observed that after a perf run, the interrupt got disabled on one/more cores. Turns out that despite requesting perf irq as percpu, the flow handler registered was not handle_percpu_irq() Given that on ARCv2 cores, IRQs < 24 are always private to cpu, we register the right handler at the very onset. Before Fix | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 0 0 0 0 ARCv2 core Intc 20 ARC perf counters | | [ARCLinux]# perf record -c 20000 /sbin/hackbench | Running with 10*40 (== 400) tasks. | | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 0 522 8 51916 ARCv2 core Intc 20 ARC perf counters | | [ARCLinux]# perf record -c 20000 /sbin/hackbench | Running with 10*40 (== 400) tasks. | | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 0 522 8 104368 ARCv2 core Intc 20 ARC perf counters After Fix | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 0 0 0 0 ARCv2 core Intc 20 ARC perf counters | | [ARCLinux]# perf record -c 20000 /sbin/hackbench | Running with 10*40 (== 400) tasks. | | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 64198 62012 62697 67803 ARCv2 core Intc 20 ARC perf counters | | [ARCLinux]# perf record -c 20000 /sbin/hackbench | Running with 10*40 (== 400) tasks. | | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 126014 122792 123301 133654 ARCv2 core Intc 20 ARC perf counters Cc: Marc Zyngier Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Alexey Brodkin Cc: stable@vger.kernel.org #4.2+ Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta --- arch/arc/kernel/intc-arcv2.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c index 26c156827479..0394f9f61b46 100644 --- a/arch/arc/kernel/intc-arcv2.c +++ b/arch/arc/kernel/intc-arcv2.c @@ -106,10 +106,21 @@ static struct irq_chip arcv2_irq_chip = { static int arcv2_irq_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) { - if (irq == TIMER0_IRQ || irq == IPI_IRQ) + /* + * core intc IRQs [16, 23]: + * Statically assigned always private-per-core (Timers, WDT, IPI, PCT) + */ + if (hw < 24) { + /* + * A subsequent request_percpu_irq() fails if percpu_devid is + * not set. That in turns sets NOAUTOEN, meaning each core needs + * to call enable_percpu_irq() + */ + irq_set_percpu_devid(irq); irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_percpu_irq); - else + } else { irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_level_irq); + } return 0; } -- cgit v1.2.3 From 5bf704c204440b1e90251382ee07a2dc5e4960ec Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 11 Dec 2015 16:16:11 +0530 Subject: ARC: intc: No need to clear IRQ_NOAUTOEN arc_request_percpu_irq() is called by all cores to request/enable percpu irq. It has some "prep" calls needed by genirq: - setup percpu devid - disable IRQ_NOAUTOEN However given that enable_percpu_irq() is called enayways, latter can be avoided. We are now left with irq_set_percpu_devid() quirk and that too for ARCompact builds only, since previous patch updated ARCv2 intc to do this in the "right" place, i.e. irq map function. By next release, this will ultimately be fixed for ARCompact as well. Cc: Marc Zyngier Cc: Thomas Gleixner Cc: Alexey Brodkin Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta --- arch/arc/kernel/irq.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index 2ee226546c6a..d736678d2724 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -60,14 +60,17 @@ void arc_request_percpu_irq(int irq, int cpu, if (!cpu) { int rc; +#ifdef CONFIG_ISA_ARCOMPACT /* - * These 2 calls are essential to making percpu IRQ APIs work - * Ideally these details could be hidden in irq chip map function - * but the issue is IPIs IRQs being static (non-DT) and platform - * specific, so we can't identify them there. + * A subsequent request_percpu_irq() fails if percpu_devid is + * not set. That in turns sets NOAUTOEN, meaning each core needs + * to call enable_percpu_irq() + * + * For ARCv2, this is done in irq map function since we know + * which irqs are strictly per cpu */ irq_set_percpu_devid(irq); - irq_modify_status(irq, IRQ_NOAUTOEN, 0); /* @irq, @clr, @set */ +#endif rc = request_percpu_irq(irq, isr, irq_nm, percpu_dev); if (rc) -- cgit v1.2.3 From c6317bc7c5ab87ba0672a5fab8ef94829f78be02 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 11 Dec 2015 13:13:12 +0530 Subject: ARCv2: perf: Ensure perf intr gets enabled on all cores This was the second perf intr issue perf sampling on multicore requires intr to be enabled on all cores. ARC perf probe code used helper arc_request_percpu_irq() which calls - request_percpu_irq() on core0 - enable_percpu_irq() on all all cores (including core0) genirq requires that request be made ahead of enable call. However if perf probe happened on non core0 (observed on a 3.18 kernel), enable would get called ahead of request, failing obviously and rendering perf intr disabled on all such cores [ 11.120000] 1 ARC perf : 8 counters (48 bits), 113 conditions, [overflow IRQ support] [ 11.130000] 1 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 3 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 2 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 0 =====> request_percpu_irq() IRQ 20 [ 11.140000] 0 -----> enable_percpu_irq() IRQ 20 Fix this fragility, by calling request_percpu_irq() on whatever core calls probe (there is no requirement on which core calls this anyways) and then calling enable on each cores. Interestingly this started as invesigation of STAR 9000838902: "sporadically IRQs enabled on perf prob" which was about occassional boot spew as request_percpu_irq got called non-locally (from an IPI), and re-enabled interrupts in following path proc_mkdir -> spin_unlock_irq() which the irq work code didn't like. | ARC perf : 8 counters (48 bits), 113 conditions, [overflow IRQ support] | | BUG: failure at ../kernel/irq_work.c:135/irq_work_run_list()! | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.10-01127-g285efb8e66d1 #2 | | Stack Trace: | arc_unwind_core.constprop.1+0x94/0x104 | dump_stack+0x62/0x98 | irq_work_run_list+0xb0/0xb4 | irq_work_run+0x22/0x3c | do_IPI+0x74/0x9c | handle_irq_event_percpu+0x34/0x164 | handle_percpu_irq+0x58/0x78 | generic_handle_irq+0x1e/0x2c | arch_do_IRQ+0x3c/0x60 | ret_from_exception+0x0/0x8 Cc: Marc Zyngier Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Alexey Brodkin Cc: #4.2+ Signed-off-by: Vineet Gupta --- arch/arc/kernel/perf_event.c | 32 +++++++++----------------------- 1 file changed, 9 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c index 0c08bb1ce15a..8b134cfe5e1f 100644 --- a/arch/arc/kernel/perf_event.c +++ b/arch/arc/kernel/perf_event.c @@ -428,12 +428,11 @@ static irqreturn_t arc_pmu_intr(int irq, void *dev) #endif /* CONFIG_ISA_ARCV2 */ -void arc_cpu_pmu_irq_init(void) +static void arc_cpu_pmu_irq_init(void *data) { - struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu); + int irq = *(int *)data; - arc_request_percpu_irq(arc_pmu->irq, smp_processor_id(), arc_pmu_intr, - "ARC perf counters", pmu_cpu); + enable_percpu_irq(irq, IRQ_TYPE_NONE); /* Clear all pending interrupt flags */ write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff); @@ -515,7 +514,6 @@ static int arc_pmu_device_probe(struct platform_device *pdev) if (has_interrupts) { int irq = platform_get_irq(pdev, 0); - unsigned long flags; if (irq < 0) { pr_err("Cannot get IRQ number for the platform\n"); @@ -524,24 +522,12 @@ static int arc_pmu_device_probe(struct platform_device *pdev) arc_pmu->irq = irq; - /* - * arc_cpu_pmu_irq_init() needs to be called on all cores for - * their respective local PMU. - * However we use opencoded on_each_cpu() to ensure it is called - * on core0 first, so that arc_request_percpu_irq() sets up - * AUTOEN etc. Otherwise enable_percpu_irq() fails to enable - * perf IRQ on non master cores. - * see arc_request_percpu_irq() - */ - preempt_disable(); - local_irq_save(flags); - arc_cpu_pmu_irq_init(); - local_irq_restore(flags); - smp_call_function((smp_call_func_t)arc_cpu_pmu_irq_init, 0, 1); - preempt_enable(); - - /* Clean all pending interrupt flags */ - write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff); + /* intc map function ensures irq_set_percpu_devid() called */ + request_percpu_irq(irq, arc_pmu_intr, "ARC perf counters", + this_cpu_ptr(&arc_pmu_cpu)); + + on_each_cpu(arc_cpu_pmu_irq_init, &irq, 1); + } else arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT; -- cgit v1.2.3 From c512c6ba7ac41b8bc196f17a85ee52099a109146 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 11 Dec 2015 19:31:23 +0530 Subject: ARC: intc: Document arc_request_percpu_irq() better Signed-off-by: Vineet Gupta --- arch/arc/kernel/irq.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index d736678d2724..b1f75937f0e1 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -51,6 +51,18 @@ void arch_do_IRQ(unsigned int irq, struct pt_regs *regs) set_irq_regs(old_regs); } +/* + * API called for requesting percpu interrupts - called by each CPU + * - For boot CPU, actually request the IRQ with genirq core + enables + * - For subsequent callers only enable called locally + * + * Relies on being called by boot cpu first (i.e. request called ahead) of + * any enable as expected by genirq. Hence Suitable only for TIMER, IPI + * which are guaranteed to be setup on boot core first. + * Late probed peripherals such as perf can't use this as there no guarantee + * of being called on boot CPU first. + */ + void arc_request_percpu_irq(int irq, int cpu, irqreturn_t (*isr)(int irq, void *dev), const char *irq_nm, -- cgit v1.2.3 From 20f36e0380a7e871a711d5e4e59d04d4948326b4 Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Sat, 12 Dec 2015 19:25:55 -0500 Subject: xen/x86/pvh: Use HVM's flush_tlb_others op Using MMUEXT_TLB_FLUSH_MULTI doesn't buy us much since the hypervisor will likely perform same IPIs as would have the guest. More importantly, using MMUEXT_INVLPG_MULTI may not to invalidate the guest's address on remote CPU (when, for example, VCPU from another guest is running there). Signed-off-by: Boris Ostrovsky Suggested-by: Jan Beulich Signed-off-by: David Vrabel --- arch/x86/xen/mmu.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index ac161db63388..cb5e266a8bf7 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -2495,14 +2495,9 @@ void __init xen_init_mmu_ops(void) { x86_init.paging.pagetable_init = xen_pagetable_init; - /* Optimization - we can use the HVM one but it has no idea which - * VCPUs are descheduled - which means that it will needlessly IPI - * them. Xen knows so let it do the job. - */ - if (xen_feature(XENFEAT_auto_translated_physmap)) { - pv_mmu_ops.flush_tlb_others = xen_flush_tlb_others; + if (xen_feature(XENFEAT_auto_translated_physmap)) return; - } + pv_mmu_ops = xen_mmu_ops; memset(dummy_mapping, 0xff, PAGE_SIZE); -- cgit v1.2.3 From 81b1b9ca6d5ca5f3ce91c0095402def657cf5db3 Mon Sep 17 00:00:00 2001 From: Haozhong Zhang Date: Mon, 14 Dec 2015 23:13:38 +0800 Subject: KVM: VMX: Fix host initiated access to guest MSR_TSC_AUX The current handling of accesses to guest MSR_TSC_AUX returns error if vcpu does not support rdtscp, though those accesses are initiated by host. This can result in the reboot failure of some versions of QEMU. This patch fixes this issue by passing those host initiated accesses for further handling instead. Signed-off-by: Haozhong Zhang Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 6b5605607849..44976a596fa6 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -2803,7 +2803,7 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info) msr_info->data = vcpu->arch.ia32_xss; break; case MSR_TSC_AUX: - if (!guest_cpuid_has_rdtscp(vcpu)) + if (!guest_cpuid_has_rdtscp(vcpu) && !msr_info->host_initiated) return 1; /* Otherwise falls through */ default: @@ -2909,7 +2909,7 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info) clear_atomic_switch_msr(vmx, MSR_IA32_XSS); break; case MSR_TSC_AUX: - if (!guest_cpuid_has_rdtscp(vcpu)) + if (!guest_cpuid_has_rdtscp(vcpu) && !msr_info->host_initiated) return 1; /* Check reserved bit, higher 32 bits should be zero */ if ((data >> 32) != 0) -- cgit v1.2.3 From 27801885151d3c187719f082a0ef54e05b9c9a16 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Mon, 14 Dec 2015 10:30:02 -0800 Subject: [IA64] Enable mlock2 syscall for ia64 New system call added in commit a8ca5d0ecbdde5cc3d7accacbd69968b0c98764e mm: mlock: add new mlock system call Signed-off-by: Tony Luck --- arch/ia64/include/asm/unistd.h | 2 +- arch/ia64/include/uapi/asm/unistd.h | 1 + arch/ia64/kernel/entry.S | 1 + 3 files changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h index db73390568c8..74c132d901bd 100644 --- a/arch/ia64/include/asm/unistd.h +++ b/arch/ia64/include/asm/unistd.h @@ -11,7 +11,7 @@ -#define NR_syscalls 322 /* length of syscall table */ +#define NR_syscalls 323 /* length of syscall table */ /* * The following defines stop scripts/checksyscalls.sh from complaining about diff --git a/arch/ia64/include/uapi/asm/unistd.h b/arch/ia64/include/uapi/asm/unistd.h index 9038726e7d26..762edce7572e 100644 --- a/arch/ia64/include/uapi/asm/unistd.h +++ b/arch/ia64/include/uapi/asm/unistd.h @@ -335,5 +335,6 @@ #define __NR_userfaultfd 1343 #define __NR_membarrier 1344 #define __NR_kcmp 1345 +#define __NR_mlock2 1346 #endif /* _UAPI_ASM_IA64_UNISTD_H */ diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index dcd97f84d065..534a74acb849 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1771,5 +1771,6 @@ sys_call_table: data8 sys_userfaultfd data8 sys_membarrier data8 sys_kcmp // 1345 + data8 sys_mlock2 .org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls -- cgit v1.2.3 From 13fdae1ae565f214f25753492783ce45cbf23532 Mon Sep 17 00:00:00 2001 From: Bai Ping Date: Wed, 9 Dec 2015 16:15:55 +0800 Subject: ARM: dts: imx: Fix the assigned-clock mismatch issue on imx6q/dl The 'assigned-clock-parents' and 'assigned-clock-rates' list should corresponding to the 'assigned-clocks' property clock list. Signed-off-by: Bai Ping Fixes: ed339363de1b ("ARM: dts: imx6qdl-sabreauto: Allow HDMI and LVDS to work simultaneously") Cc: Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 8263fc18a7d9..d354d406954d 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -113,14 +113,14 @@ &clks { assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>, <&clks IMX6QDL_PLL4_BYPASS>, - <&clks IMX6QDL_CLK_PLL4_POST_DIV>, <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + <&clks IMX6QDL_CLK_LDB_DI1_SEL>, + <&clks IMX6QDL_CLK_PLL4_POST_DIV>; assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>, <&clks IMX6QDL_PLL4_BYPASS_SRC>, <&clks IMX6QDL_CLK_PLL3_USB_OTG>, <&clks IMX6QDL_CLK_PLL3_USB_OTG>; - assigned-clock-rates = <0>, <0>, <24576000>; + assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>; }; &ecspi1 { -- cgit v1.2.3 From 3a35e470bc6bc4ce34c19c410ebbe4e3bbf0bafe Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Fri, 11 Dec 2015 14:22:04 +0100 Subject: ARM: dts: imx6: Fix Ethernet PHY mode on Ventana boards MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Gateworks Ventana boards seem to need "RGMII-ID" (internal delay) PHY mode, instead of simple "RGMII", for their Marvell 88E1510 transceiver. Otherwise, the Ethernet MAC doesn't work with Marvell PHY driver (TX doesn't seem to work correctly). Tested on GW5400 rev. C. This bug affects ARM Fedora 23. Signed-off-by: Krzysztof Hałasa Acked-by: Tim Harvey Cc: Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-gw5400-a.dts | 2 +- arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 58adf176425a..a51834e1dd27 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -154,7 +154,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 7b31fdb79ced..dc0cebfe22d7 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -94,7 +94,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 1b66328a8498..18cd4114a23e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -154,7 +154,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 7c51839ff934..eea90f37bbb8 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -155,7 +155,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 929e0b37bd9e..6c11a2ae35ef 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -145,7 +145,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; -- cgit v1.2.3 From c014953d84ec21a4df9a43be2378861ea6e9246e Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 5 Dec 2015 13:42:07 +0000 Subject: ARM: fix uaccess_with_memcpy() with SW_DOMAIN_PAN The uaccess_with_memcpy() code is currently incompatible with the SW PAN code: it takes locks within the region that we've changed the DACR, potentially sleeping as a result. As we do not save and restore the DACR across co-operative sleep events, can lead to an incorrect DACR value later in this code path. Reported-by: Peter Rosin Tested-by: Peter Rosin Signed-off-by: Russell King --- arch/arm/include/asm/uaccess.h | 4 ++++ arch/arm/lib/uaccess_with_memcpy.c | 29 +++++++++++++++++++++++------ 2 files changed, 27 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 8cc85a4ebec2..35c9db857ebe 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -510,10 +510,14 @@ __copy_to_user_std(void __user *to, const void *from, unsigned long n); static inline unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n) { +#ifndef CONFIG_UACCESS_WITH_MEMCPY unsigned int __ua_flags = uaccess_save_and_enable(); n = arm_copy_to_user(to, from, n); uaccess_restore(__ua_flags); return n; +#else + return arm_copy_to_user(to, from, n); +#endif } extern unsigned long __must_check diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c index d72b90905132..588bbc288396 100644 --- a/arch/arm/lib/uaccess_with_memcpy.c +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -88,6 +88,7 @@ pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp) static unsigned long noinline __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n) { + unsigned long ua_flags; int atomic; if (unlikely(segment_eq(get_fs(), KERNEL_DS))) { @@ -118,7 +119,9 @@ __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n) if (tocopy > n) tocopy = n; + ua_flags = uaccess_save_and_enable(); memcpy((void *)to, from, tocopy); + uaccess_restore(ua_flags); to += tocopy; from += tocopy; n -= tocopy; @@ -145,14 +148,21 @@ arm_copy_to_user(void __user *to, const void *from, unsigned long n) * With frame pointer disabled, tail call optimization kicks in * as well making this test almost invisible. */ - if (n < 64) - return __copy_to_user_std(to, from, n); - return __copy_to_user_memcpy(to, from, n); + if (n < 64) { + unsigned long ua_flags = uaccess_save_and_enable(); + n = __copy_to_user_std(to, from, n); + uaccess_restore(ua_flags); + } else { + n = __copy_to_user_memcpy(to, from, n); + } + return n; } static unsigned long noinline __clear_user_memset(void __user *addr, unsigned long n) { + unsigned long ua_flags; + if (unlikely(segment_eq(get_fs(), KERNEL_DS))) { memset((void *)addr, 0, n); return 0; @@ -175,7 +185,9 @@ __clear_user_memset(void __user *addr, unsigned long n) if (tocopy > n) tocopy = n; + ua_flags = uaccess_save_and_enable(); memset((void *)addr, 0, tocopy); + uaccess_restore(ua_flags); addr += tocopy; n -= tocopy; @@ -193,9 +205,14 @@ out: unsigned long arm_clear_user(void __user *addr, unsigned long n) { /* See rational for this in __copy_to_user() above. */ - if (n < 64) - return __clear_user_std(addr, n); - return __clear_user_memset(addr, n); + if (n < 64) { + unsigned long ua_flags = uaccess_save_and_enable(); + n = __clear_user_std(addr, n); + uaccess_restore(ua_flags); + } else { + n = __clear_user_memset(addr, n); + } + return n; } #if 0 -- cgit v1.2.3 From fa0708b320f6da4c1104fe56e01b7abf66fd16ad Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Mon, 7 Dec 2015 10:09:19 +0100 Subject: ARM: 8471/1: need to save/restore arm register(r11) when it is corrupted In cpu_v7_do_suspend routine, r11 is used while it is NOT saved/restored, different compiler may have different usage of ARM general registers, so it may cause issues during calling cpu_v7_do_suspend. We meet kernel fault occurs when using GCC 4.8.3, r11 contains valid value before calling into cpu_v7_do_suspend, but when returned from this routine, r11 is corrupted and lead to kernel fault. Doing save/restore for those corrupted registers is a must in assemble code. Signed-off-by: Anson Huang Reviewed-by: Nicolas Pitre Cc: # v3.3+ Signed-off-by: Russell King --- arch/arm/mm/proc-v7.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index de2b246fed38..8e1ea433c3f1 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -95,7 +95,7 @@ ENDPROC(cpu_v7_dcache_clean_area) .equ cpu_v7_suspend_size, 4 * 9 #ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_v7_do_suspend) - stmfd sp!, {r4 - r10, lr} + stmfd sp!, {r4 - r11, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID mrc p15, 0, r5, c13, c0, 3 @ User r/o thread ID stmia r0!, {r4 - r5} @@ -112,7 +112,7 @@ ENTRY(cpu_v7_do_suspend) mrc p15, 0, r9, c1, c0, 1 @ Auxiliary control register mrc p15, 0, r10, c1, c0, 2 @ Co-processor access control stmia r0, {r5 - r11} - ldmfd sp!, {r4 - r10, pc} + ldmfd sp!, {r4 - r11, pc} ENDPROC(cpu_v7_do_suspend) ENTRY(cpu_v7_do_resume) -- cgit v1.2.3 From 34bfbae33ae84107d0c257edd6c6a8689a09be26 Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Tue, 8 Dec 2015 13:37:19 +0100 Subject: ARM: 8475/1: SWP emulation: Restore original *data when failed __user_swpX_asm maybe failed in first STREX operation, emulate_swpX will try again, but the *data has been changed in first time. which causes the result is wrong. This patch is to fix this issue. When STREX succeed, change the *data. if it fail, *data is not changed. Signed-off-by: Shengjiu Wang Signed-off-by: Russell King --- arch/arm/kernel/swp_emulate.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index 5b26e7efa9ea..c3fe769d7558 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -36,10 +36,10 @@ */ #define __user_swpX_asm(data, addr, res, temp, B) \ __asm__ __volatile__( \ - " mov %2, %1\n" \ - "0: ldrex"B" %1, [%3]\n" \ - "1: strex"B" %0, %2, [%3]\n" \ + "0: ldrex"B" %2, [%3]\n" \ + "1: strex"B" %0, %1, [%3]\n" \ " cmp %0, #0\n" \ + " moveq %1, %2\n" \ " movne %0, %4\n" \ "2:\n" \ " .section .text.fixup,\"ax\"\n" \ -- cgit v1.2.3 From 173ae9ba63349194ae180622f05fb49f55a4df46 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 15 Dec 2015 10:15:57 -0800 Subject: Fix user-visible spelling error Pavel Machek reports a warning about W+X pages found in the "Persisent" kmap area. After grepping for it (using the correct spelling), and not finding it, I noticed how the debug printk was just misspelled. Fix it. The actual mapping bug that Pavel reported is still open. It's apparently a separate issue from the known EFI page tables, looks like it's related to the HIGHMEM mappings. Signed-off-by: Linus Torvalds --- arch/x86/mm/dump_pagetables.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c index a035c2aa7801..0f1c6fc3ddd8 100644 --- a/arch/x86/mm/dump_pagetables.c +++ b/arch/x86/mm/dump_pagetables.c @@ -89,7 +89,7 @@ static struct addr_marker address_markers[] = { { 0/* VMALLOC_START */, "vmalloc() Area" }, { 0/*VMALLOC_END*/, "vmalloc() End" }, # ifdef CONFIG_HIGHMEM - { 0/*PKMAP_BASE*/, "Persisent kmap() Area" }, + { 0/*PKMAP_BASE*/, "Persistent kmap() Area" }, # endif { 0/*FIXADDR_START*/, "Fixmap Area" }, #endif -- cgit v1.2.3 From 3e6110fd5480f5f86ff31381f4dea14218284bff Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 15 Dec 2015 12:54:06 -0800 Subject: Revert "scatterlist: use sg_phys()" commit db0fa0cb0157 "scatterlist: use sg_phys()" did replacements of the form: phys_addr_t phys = page_to_phys(sg_page(s)); phys_addr_t phys = sg_phys(s) & PAGE_MASK; However, this breaks platforms where sizeof(phys_addr_t) > sizeof(unsigned long). Revert for 4.3 and 4.4 to make room for a combined helper in 4.5. Cc: Cc: Jens Axboe Cc: Christoph Hellwig Cc: Russell King Cc: David Woodhouse Cc: Andrew Morton Fixes: db0fa0cb0157 ("scatterlist: use sg_phys()") Suggested-by: Joerg Roedel Reported-by: Vitaly Lavrov Signed-off-by: Dan Williams --- arch/arm/mm/dma-mapping.c | 2 +- arch/microblaze/kernel/dma.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index e62400e5fb99..534a60ae282e 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1521,7 +1521,7 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg, return -ENOMEM; for (count = 0, s = sg; count < (size >> PAGE_SHIFT); s = sg_next(s)) { - phys_addr_t phys = sg_phys(s) & PAGE_MASK; + phys_addr_t phys = page_to_phys(sg_page(s)); unsigned int len = PAGE_ALIGN(s->offset + s->length); if (!is_coherent && diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c index c89da6312954..bf4dec229437 100644 --- a/arch/microblaze/kernel/dma.c +++ b/arch/microblaze/kernel/dma.c @@ -61,7 +61,8 @@ static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl, /* FIXME this part of code is untested */ for_each_sg(sgl, sg, nents, i) { sg->dma_address = sg_phys(sg); - __dma_sync(sg_phys(sg), sg->length, direction); + __dma_sync(page_to_phys(sg_page(sg)) + sg->offset, + sg->length, direction); } return nents; -- cgit v1.2.3 From 2475c362134a0fa5309c7b0fdb6fc1b86dca88a1 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 16 Dec 2015 21:26:28 +1100 Subject: Partial revert of "powerpc: Individual System V IPC system calls" This partially reverts commit a34236155afb1cc41945e58388ac988431bcb0b8. While reviewing the glibc patch to exploit the individual IPC calls, Arnd & Andreas noticed that we were still requiring userspace to pass IPC_64 in order to get the new style IPC API. With a bit of cleanup in the kernel we can drop that requirement, and instead only provide the new style API, which will simplify things for userspace. Rather than try and sneak that patch into 4.4, instead we will drop the individual IPC calls for powerpc, and merge them again in 4.5 once the cleanup patch has gone in. Because we've already added sys_mlock2() as syscall #378, we don't do a full revert of the IPC calls. Instead we drop the __NR #defines, and send those now undefined syscall numbers to sys_ni_syscall(). This leaves a gap in the syscall numbers, but we'll reuse them when we merge the individual IPC calls. Signed-off-by: Michael Ellerman Acked-by: Arnd Bergmann --- arch/powerpc/include/asm/systbl.h | 24 ++++++++++++------------ arch/powerpc/include/uapi/asm/unistd.h | 12 ------------ 2 files changed, 12 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index f2b0b1b0c72a..5654ece02c0d 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -370,16 +370,16 @@ COMPAT_SYS(execveat) PPC64ONLY(switch_endian) SYSCALL_SPU(userfaultfd) SYSCALL_SPU(membarrier) -SYSCALL(semop) -SYSCALL(semget) -COMPAT_SYS(semctl) -COMPAT_SYS(semtimedop) -COMPAT_SYS(msgsnd) -COMPAT_SYS(msgrcv) -SYSCALL(msgget) -COMPAT_SYS(msgctl) -COMPAT_SYS(shmat) -SYSCALL(shmdt) -SYSCALL(shmget) -COMPAT_SYS(shmctl) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) +SYSCALL(ni_syscall) SYSCALL(mlock2) diff --git a/arch/powerpc/include/uapi/asm/unistd.h b/arch/powerpc/include/uapi/asm/unistd.h index 1effea5193d6..12a05652377a 100644 --- a/arch/powerpc/include/uapi/asm/unistd.h +++ b/arch/powerpc/include/uapi/asm/unistd.h @@ -388,18 +388,6 @@ #define __NR_switch_endian 363 #define __NR_userfaultfd 364 #define __NR_membarrier 365 -#define __NR_semop 366 -#define __NR_semget 367 -#define __NR_semctl 368 -#define __NR_semtimedop 369 -#define __NR_msgsnd 370 -#define __NR_msgrcv 371 -#define __NR_msgget 372 -#define __NR_msgctl 373 -#define __NR_shmat 374 -#define __NR_shmdt 375 -#define __NR_shmget 376 -#define __NR_shmctl 377 #define __NR_mlock2 378 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */ -- cgit v1.2.3 From ff1c0b6a795bce744527bc10c8268127ed818b42 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Tue, 15 Dec 2015 13:57:16 +0530 Subject: ARC: [plat-sim] unbork non default CONFIG_LINUX_LINK_BASE HIGHMEM support bumped the default memory size for nsim platform to 1G. Thus total memory ended at the very edge of start of peripherals address space. With linux link base shifted, memory started bleeding into peripheral space which caused early boot bad_page spew ! Fixes: 29e332261d2 ("ARC: mm: HIGHMEM: populate high memory from DT") Reported-by: Anton Kolesov Signed-off-by: Vineet Gupta --- arch/arc/Kconfig | 1 + arch/arc/boot/dts/nsim_hs.dts | 3 ++- arch/arc/mm/init.c | 4 +++- 3 files changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 2c2ac3f3ff80..6312f607932f 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -445,6 +445,7 @@ config LINUX_LINK_BASE However some customers have peripherals mapped at this addr, so Linux needs to be scooted a bit. If you don't know what the above means, leave this setting alone. + This needs to match memory start address specified in Device Tree config HIGHMEM bool "High Memory Support" diff --git a/arch/arc/boot/dts/nsim_hs.dts b/arch/arc/boot/dts/nsim_hs.dts index b0eb0e7fe21d..fc81879bc1f5 100644 --- a/arch/arc/boot/dts/nsim_hs.dts +++ b/arch/arc/boot/dts/nsim_hs.dts @@ -17,7 +17,8 @@ memory { device_type = "memory"; - reg = <0x0 0x80000000 0x0 0x40000000 /* 1 GB low mem */ + /* CONFIG_LINUX_LINK_BASE needs to match low mem start */ + reg = <0x0 0x80000000 0x0 0x20000000 /* 512 MB low mem */ 0x1 0x00000000 0x0 0x40000000>; /* 1 GB highmem */ }; diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c index a9305b5a2cd4..7d2c4fbf4f22 100644 --- a/arch/arc/mm/init.c +++ b/arch/arc/mm/init.c @@ -51,7 +51,9 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size) int in_use = 0; if (!low_mem_sz) { - BUG_ON(base != low_mem_start); + if (base != low_mem_start) + panic("CONFIG_LINUX_LINK_BASE != DT memory { }"); + low_mem_sz = size; in_use = 1; } else { -- cgit v1.2.3 From bc79c9a7216562a2035d2f64f73626613c1300d0 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 11 Dec 2015 18:04:22 +0530 Subject: ARC: dw2 unwind: Reinstante unwinding out of modules The fix which removed linear searching of dwarf (because binary lookup data always exists) missed out on the fact that modules don't get the binary lookup tables info. This caused unwinding out of modules to stop working. So add binary lookup header setup (equivalent of eh_frame_hdr setup) to modules as well. While at it, confine the header setup to within unwinder code, reducing one API exposed out of unwinder code. Fixes: 2e22502c080f ARC: dw2 unwind: Remove falllback linear search thru FDE entries Cc: Signed-off-by: Vineet Gupta --- arch/arc/include/asm/unwind.h | 4 ---- arch/arc/kernel/setup.c | 1 - arch/arc/kernel/unwind.c | 40 ++++++++++++++++++++++++++-------------- 3 files changed, 26 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/arc/include/asm/unwind.h b/arch/arc/include/asm/unwind.h index 7ca628b6ee2a..c11a25bb8158 100644 --- a/arch/arc/include/asm/unwind.h +++ b/arch/arc/include/asm/unwind.h @@ -112,7 +112,6 @@ struct unwind_frame_info { extern int arc_unwind(struct unwind_frame_info *frame); extern void arc_unwind_init(void); -extern void arc_unwind_setup(void); extern void *unwind_add_table(struct module *module, const void *table_start, unsigned long table_size); extern void unwind_remove_table(void *handle, int init_only); @@ -152,9 +151,6 @@ static inline void arc_unwind_init(void) { } -static inline void arc_unwind_setup(void) -{ -} #define unwind_add_table(a, b, c) #define unwind_remove_table(a, b) diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index c33e77c0ad3e..e1b87444ea9a 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -429,7 +429,6 @@ void __init setup_arch(char **cmdline_p) #endif arc_unwind_init(); - arc_unwind_setup(); } static int __init customize_machine(void) diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c index 7352475451f6..9f9ecc15556e 100644 --- a/arch/arc/kernel/unwind.c +++ b/arch/arc/kernel/unwind.c @@ -170,6 +170,23 @@ static struct unwind_table *find_table(unsigned long pc) static unsigned long read_pointer(const u8 **pLoc, const void *end, signed ptrType); +static void init_unwind_hdr(struct unwind_table *table, + void *(*alloc) (unsigned long)); + +/* + * wrappers for header alloc (vs. calling one vs. other at call site) + * to elide section mismatches warnings + */ +static void *__init unw_hdr_alloc_early(unsigned long sz) +{ + return __alloc_bootmem_nopanic(sz, sizeof(unsigned int), + MAX_DMA_ADDRESS); +} + +static void *unw_hdr_alloc(unsigned long sz) +{ + return kmalloc(sz, GFP_KERNEL); +} static void init_unwind_table(struct unwind_table *table, const char *name, const void *core_start, unsigned long core_size, @@ -209,6 +226,8 @@ void __init arc_unwind_init(void) __start_unwind, __end_unwind - __start_unwind, NULL, 0); /*__start_unwind_hdr, __end_unwind_hdr - __start_unwind_hdr);*/ + + init_unwind_hdr(&root_table, unw_hdr_alloc_early); } static const u32 bad_cie, not_fde; @@ -241,8 +260,8 @@ static void swap_eh_frame_hdr_table_entries(void *p1, void *p2, int size) e2->fde = v; } -static void __init setup_unwind_table(struct unwind_table *table, - void *(*alloc) (unsigned long)) +static void init_unwind_hdr(struct unwind_table *table, + void *(*alloc) (unsigned long)) { const u8 *ptr; unsigned long tableSize = table->size, hdrSize; @@ -300,9 +319,11 @@ static void __init setup_unwind_table(struct unwind_table *table, hdrSize = 4 + sizeof(unsigned long) + sizeof(unsigned int) + 2 * n * sizeof(unsigned long); + header = alloc(hdrSize); if (!header) return; + header->version = 1; header->eh_frame_ptr_enc = DW_EH_PE_abs | DW_EH_PE_native; header->fde_count_enc = DW_EH_PE_abs | DW_EH_PE_data4; @@ -342,18 +363,6 @@ static void __init setup_unwind_table(struct unwind_table *table, table->header = (const void *)header; } -static void *__init balloc(unsigned long sz) -{ - return __alloc_bootmem_nopanic(sz, - sizeof(unsigned int), - __pa(MAX_DMA_ADDRESS)); -} - -void __init arc_unwind_setup(void) -{ - setup_unwind_table(&root_table, balloc); -} - #ifdef CONFIG_MODULES static struct unwind_table *last_table; @@ -377,6 +386,8 @@ void *unwind_add_table(struct module *module, const void *table_start, table_start, table_size, NULL, 0); + init_unwind_hdr(table, unw_hdr_alloc); + #ifdef UNWIND_DEBUG unw_debug("Table added for [%s] %lx %lx\n", module->name, table->core.pc, table->core.range); @@ -439,6 +450,7 @@ void unwind_remove_table(void *handle, int init_only) info.init_only = init_only; unlink_table(&info); /* XXX: SMP */ + kfree(table->header); kfree(table); } -- cgit v1.2.3 From 323f41f9e7d0cb5b1d1586aded6682855f1e646d Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 16 Dec 2015 17:17:00 +0530 Subject: ARC: dw2 unwind: Ignore CIE version !=1 gracefully instead of bailing ARC dwarf unwinder only supports CIE version == 1 The boot time dwarf sanitizer (part of binary lookup table constructor) would simply bail if it saw CIE version == 3, rendering unwinder with a NULL lookup table. It seems libgcc linked with kernel does have such entries. With fallback linear search removed, and a NULL binary lookup table, unwinder fails to generate any stack trace. So allow graceful ignoring of unsupported CIE entries. This problem was initially seen in Alexey's setup (and not mine) as he was using buildroot built toolchain (libgcc) which doesn't get built with CFLAGS_FOR_TARGET="-gdwarf-2 which is my default Fixes STAR 9000985048: "kernel unwinder broken with stock tools" Fixes: 2e22502c080f ARC: dw2 unwind: Remove falllback linear search thru FDE entries Reported-by Alexey Brodkin Cc: Signed-off-by: Vineet Gupta --- arch/arc/kernel/unwind.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c index 9f9ecc15556e..cf2828ab0905 100644 --- a/arch/arc/kernel/unwind.c +++ b/arch/arc/kernel/unwind.c @@ -293,13 +293,13 @@ static void init_unwind_hdr(struct unwind_table *table, const u32 *cie = cie_for_fde(fde, table); signed ptrType; - if (cie == ¬_fde) + if (cie == ¬_fde) /* only process FDE here */ continue; if (cie == NULL || cie == &bad_cie) - return; + continue; /* say FDE->CIE.version != 1 */ ptrType = fde_pointer_type(cie); if (ptrType < 0) - return; + continue; ptr = (const u8 *)(fde + 2); if (!read_pointer(&ptr, (const u8 *)(fde + 1) + *fde, @@ -343,6 +343,10 @@ static void init_unwind_hdr(struct unwind_table *table, if (fde[1] == 0xffffffff) continue; /* this is a CIE */ + + if (*(u8 *)(cie + 2) != 1) + continue; /* FDE->CIE.version not supported */ + ptr = (const u8 *)(fde + 2); header->table[n].start = read_pointer(&ptr, (const u8 *)(fde + 1) + @@ -519,7 +523,8 @@ static const u32 *cie_for_fde(const u32 *fde, const struct unwind_table *table) if (*cie <= sizeof(*cie) + 4 || *cie >= fde[1] - sizeof(*fde) || (*cie & (sizeof(*cie) - 1)) - || (cie[1] != 0xffffffff)) + || (cie[1] != 0xffffffff) + || ( *(u8 *)(cie + 2) != 1)) /* version 1 supported */ return NULL; /* this is not a (valid) CIE */ return cie; } -- cgit v1.2.3 From b474a02382b75f4a75c4e94eb9847aad28dd4a37 Mon Sep 17 00:00:00 2001 From: Noam Camus Date: Wed, 16 Dec 2015 03:10:27 +0200 Subject: ARC: rename smp operation init_irq_cpu() to init_per_cpu() This will better reflect its description i.e. "any needed setup..." and not just do an "IPI request". Signed-off-by: Noam Camus Acked-by: Vineet Gupta Signed-off-by: Vineet Gupta --- arch/arc/include/asm/smp.h | 4 ++-- arch/arc/kernel/irq.c | 4 ++-- arch/arc/kernel/mcip.c | 2 +- arch/arc/kernel/smp.c | 4 ++-- 4 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h index 133c867d15af..991380438d6b 100644 --- a/arch/arc/include/asm/smp.h +++ b/arch/arc/include/asm/smp.h @@ -48,7 +48,7 @@ extern int smp_ipi_irq_setup(int cpu, int irq); * @init_early_smp: A SMP specific h/w block can init itself * Could be common across platforms so not covered by * mach_desc->init_early() - * @init_irq_cpu: Called for each core so SMP h/w block driver can do + * @init_per_cpu: Called for each core so SMP h/w block driver can do * any needed setup per cpu (e.g. IPI request) * @cpu_kick: For Master to kickstart a cpu (optionally at a PC) * @ipi_send: To send IPI to a @cpu @@ -57,7 +57,7 @@ extern int smp_ipi_irq_setup(int cpu, int irq); struct plat_smp_ops { const char *info; void (*init_early_smp)(void); - void (*init_irq_cpu)(int cpu); + void (*init_per_cpu)(int cpu); void (*cpu_kick)(int cpu, unsigned long pc); void (*ipi_send)(int cpu); void (*ipi_clear)(int irq); diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index b1f75937f0e1..3917fe7e62fc 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -29,8 +29,8 @@ void __init init_IRQ(void) #ifdef CONFIG_SMP /* a SMP H/w block could do IPI IRQ request here */ - if (plat_smp_ops.init_irq_cpu) - plat_smp_ops.init_irq_cpu(smp_processor_id()); + if (plat_smp_ops.init_per_cpu) + plat_smp_ops.init_per_cpu(smp_processor_id()); if (machine_desc->init_cpu_smp) machine_desc->init_cpu_smp(smp_processor_id()); diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c index 74a9b074ac3e..bd237acdf4f2 100644 --- a/arch/arc/kernel/mcip.c +++ b/arch/arc/kernel/mcip.c @@ -132,7 +132,7 @@ static void mcip_probe_n_setup(void) struct plat_smp_ops plat_smp_ops = { .info = smp_cpuinfo_buf, .init_early_smp = mcip_probe_n_setup, - .init_irq_cpu = mcip_setup_per_cpu, + .init_per_cpu = mcip_setup_per_cpu, .ipi_send = mcip_ipi_send, .ipi_clear = mcip_ipi_clear, }; diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c index 580587805fa3..0b061a475158 100644 --- a/arch/arc/kernel/smp.c +++ b/arch/arc/kernel/smp.c @@ -132,8 +132,8 @@ void start_kernel_secondary(void) pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu); /* Some SMP H/w setup - for each cpu */ - if (plat_smp_ops.init_irq_cpu) - plat_smp_ops.init_irq_cpu(cpu); + if (plat_smp_ops.init_per_cpu) + plat_smp_ops.init_per_cpu(cpu); if (machine_desc->init_cpu_smp) machine_desc->init_cpu_smp(cpu); -- cgit v1.2.3 From 575a9d4e2c09675c05db2bc781c5c33153ce932f Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 17 Dec 2015 12:22:21 +0530 Subject: ARC: smp: Rename platform hook @init_cpu_smp -> @init_per_cpu Makes it similar to smp_ops which also has callback with same name Signed-off-by: Vineet Gupta --- arch/arc/include/asm/mach_desc.h | 4 ++-- arch/arc/kernel/irq.c | 4 ++-- arch/arc/kernel/smp.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arc/include/asm/mach_desc.h b/arch/arc/include/asm/mach_desc.h index 6ff657a904b6..c28e6c347b49 100644 --- a/arch/arc/include/asm/mach_desc.h +++ b/arch/arc/include/asm/mach_desc.h @@ -23,7 +23,7 @@ * @dt_compat: Array of device tree 'compatible' strings * (XXX: although only 1st entry is looked at) * @init_early: Very early callback [called from setup_arch()] - * @init_cpu_smp: for each CPU as it is coming up (SMP as well as UP) + * @init_per_cpu: for each CPU as it is coming up (SMP as well as UP) * [(M):init_IRQ(), (o):start_kernel_secondary()] * @init_machine: arch initcall level callback (e.g. populate static * platform devices or parse Devicetree) @@ -35,7 +35,7 @@ struct machine_desc { const char **dt_compat; void (*init_early)(void); #ifdef CONFIG_SMP - void (*init_cpu_smp)(unsigned int); + void (*init_per_cpu)(unsigned int); #endif void (*init_machine)(void); void (*init_late)(void); diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index 3917fe7e62fc..ba17f85285cf 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -32,8 +32,8 @@ void __init init_IRQ(void) if (plat_smp_ops.init_per_cpu) plat_smp_ops.init_per_cpu(smp_processor_id()); - if (machine_desc->init_cpu_smp) - machine_desc->init_cpu_smp(smp_processor_id()); + if (machine_desc->init_per_cpu) + machine_desc->init_per_cpu(smp_processor_id()); #endif } diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c index 0b061a475158..ef6e9e15b82a 100644 --- a/arch/arc/kernel/smp.c +++ b/arch/arc/kernel/smp.c @@ -135,8 +135,8 @@ void start_kernel_secondary(void) if (plat_smp_ops.init_per_cpu) plat_smp_ops.init_per_cpu(cpu); - if (machine_desc->init_cpu_smp) - machine_desc->init_cpu_smp(cpu); + if (machine_desc->init_per_cpu) + machine_desc->init_per_cpu(cpu); arc_local_timer_setup(); -- cgit v1.2.3 From 98da62b716a3b24ab8e77453c9a8a954124c18cd Mon Sep 17 00:00:00 2001 From: Stewart Smith Date: Fri, 11 Dec 2015 12:08:23 +1100 Subject: powerpc/powernv: pr_warn_once on unsupported OPAL_MSG type When running on newer OPAL firmware that supports sending extra OPAL_MSG types, we would print a warning on *every* message received. This could be a problem for kernels that don't support OPAL_MSG_OCC on machines that are running real close to thermal limits and the OCC is throttling the chip. For a kernel that is paying attention to the message queue, we could get these notifications quite often. Conceivably, future message types could also come fairly often, and printing that we didn't understand them 10,000 times provides no further information than printing them once. Cc: stable@vger.kernel.org Signed-off-by: Stewart Smith Signed-off-by: Michael Ellerman --- arch/powerpc/platforms/powernv/opal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index 4296d55e88f3..57cffb80bc36 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -278,7 +278,7 @@ static void opal_handle_message(void) /* Sanity check */ if (type >= OPAL_MSG_TYPE_MAX) { - pr_warning("%s: Unknown message type: %u\n", __func__, type); + pr_warn_once("%s: Unknown message type: %u\n", __func__, type); return; } opal_message_do_notify(type, (void *)&msg); -- cgit v1.2.3 From 0b3e6fca4d1af4aa150d32506220f4241323a00c Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Mon, 14 Dec 2015 22:34:05 +0200 Subject: ARM: OMAP2+: am43xx: enable GENERIC_CLOCKEVENTS_BROADCAST System will misbehave in the following case: - AM43XX only build (UP); - CONFIG_CPU_IDLE=y - ARM TWD timer enabled and selected as clockevent device. In the above case, It's expected that broadcast timer will be used as backup timer when CPUIdle will put MPU in low power states where ARM TWD will stop and lose its context. But, the CONFIG_SMP might not be selected when kernel is built for AM43XX SoC only and, as result, GENERIC_CLOCKEVENTS_BROADCAST option will not be selected also. This will break CPUIdle and System will stuck in low power states. Hence, fix it by selecting GENERIC_CLOCKEVENTS_BROADCAST option for AM43XX SoCs always and add empty tick_broadcast() function implementation - no need to send any IPI on UP. After this change timer1 will be selected as broadcast timer the same way as for SMP, and CPUIdle will work properly. Signed-off-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 1 + arch/arm/mach-omap2/timer.c | 6 ++++++ 2 files changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 4b4371db5799..32a0086f967d 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -65,6 +65,7 @@ config SOC_AM43XX select MACH_OMAP_GENERIC select MIGHT_HAVE_CACHE_L2X0 select HAVE_ARM_SCU + select GENERIC_CLOCKEVENTS_BROADCAST config SOC_DRA7XX bool "TI DRA7XX" diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index b18ebbefae09..f86692dbcfd5 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -320,6 +320,12 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, return r; } +#if !defined(CONFIG_SMP) && defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) +void tick_broadcast(const struct cpumask *mask) +{ +} +#endif + static void __init omap2_gp_clockevent_init(int gptimer_id, const char *fck_source, const char *property) -- cgit v1.2.3 From 54011103fb457ba8b23aed6699609c0ad65b05fb Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 14 Dec 2015 22:34:06 +0200 Subject: ARM: OMAP2+: AM43xx: select ARM TWD timer Make sure to tell the kernel that AM437x devices have ARM TWD timer. Signed-off-by: Felipe Balbi [grygorii.strashko@ti.com: drop ARM Global timer selection, because it's incompatible with PM (cpuidle/cpufreq). So, it's unsafe to enable it unconditionally] Signed-off-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 32a0086f967d..0517f0c1581a 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -66,6 +66,7 @@ config SOC_AM43XX select MIGHT_HAVE_CACHE_L2X0 select HAVE_ARM_SCU select GENERIC_CLOCKEVENTS_BROADCAST + select HAVE_ARM_TWD config SOC_DRA7XX bool "TI DRA7XX" -- cgit v1.2.3 From 036592fbbe753d236402a0ae68148e7c143a0f0e Mon Sep 17 00:00:00 2001 From: Alistair Popple Date: Fri, 18 Dec 2015 17:16:17 +1100 Subject: powerpc/opal-irqchip: Fix deadlock introduced by "Fix double endian conversion" Commit 25642e1459ac ("powerpc/opal-irqchip: Fix double endian conversion") fixed an endian bug by calling opal_handle_events() in opal_event_unmask(). However this introduced a deadlock if we find an event is active during unmasking and call opal_handle_events() again. The bad call sequence is: opal_interrupt() -> opal_handle_events() -> generic_handle_irq() -> handle_level_irq() -> raw_spin_lock(&desc->lock) handle_irq_event(desc) unmask_irq(desc) -> opal_event_unmask() -> opal_handle_events() -> generic_handle_irq() -> handle_level_irq() -> raw_spin_lock(&desc->lock) (BOOM) When generating multiple opal events in quick succession this would lead to the following stall warnings: EEH: Fenced PHB#0 detected, location: U78C9.001.WZS09XA-P1-C32 INFO: rcu_sched detected stalls on CPUs/tasks: 12-...: (1 GPs behind) idle=68f/140000000000001/0 softirq=860/861 fqs=2065 15-...: (1 GPs behind) idle=be5/140000000000001/0 softirq=1142/1143 fqs=2065 (detected by 13, t=2102 jiffies, g=1325, c=1324, q=602) NMI watchdog: BUG: soft lockup - CPU#18 stuck for 22s! [irqbalance:2696] INFO: rcu_sched detected stalls on CPUs/tasks: 12-...: (1 GPs behind) idle=68f/140000000000001/0 softirq=860/861 fqs=8371 15-...: (1 GPs behind) idle=be5/140000000000001/0 softirq=1142/1143 fqs=8371 (detected by 20, t=8407 jiffies, g=1325, c=1324, q=1290) This patch corrects the problem by queuing the work if an event is active during unmasking, which is similar to the pre-endian fix behaviour. Fixes: 25642e1459ac ("powerpc/opal-irqchip: Fix double endian conversion") Signed-off-by: Alistair Popple Reported-by: Andrew Donnellan Signed-off-by: Michael Ellerman --- arch/powerpc/platforms/powernv/opal-irqchip.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/powernv/opal-irqchip.c b/arch/powerpc/platforms/powernv/opal-irqchip.c index 0a00e2aed393..e505223b4ec5 100644 --- a/arch/powerpc/platforms/powernv/opal-irqchip.c +++ b/arch/powerpc/platforms/powernv/opal-irqchip.c @@ -83,7 +83,19 @@ static void opal_event_unmask(struct irq_data *d) set_bit(d->hwirq, &opal_event_irqchip.mask); opal_poll_events(&events); - opal_handle_events(be64_to_cpu(events)); + last_outstanding_events = be64_to_cpu(events); + + /* + * We can't just handle the events now with opal_handle_events(). + * If we did we would deadlock when opal_event_unmask() is called from + * handle_level_irq() with the irq descriptor lock held, because + * calling opal_handle_events() would call generic_handle_irq() and + * then handle_level_irq() which would try to take the descriptor lock + * again. Instead queue the events for later. + */ + if (last_outstanding_events & opal_event_irqchip.mask) + /* Need to retrigger the interrupt */ + irq_work_queue(&opal_event_irq_work); } static int opal_event_set_type(struct irq_data *d, unsigned int flow_type) -- cgit v1.2.3 From 272fa59ccb4fc802af28b1d699c2463db6a71bf7 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Thu, 17 Dec 2015 19:06:02 +0100 Subject: s390/dis: Fix handling of format specifiers The print_insn() function returns strings like "lghi %r1,0". To escape the '%' character in sprintf() a second '%' is used. For example "lghi %%r1,0" is converted into "lghi %r1,0". After print_insn() the output string is passed to printk(). Because format specifiers like "%r" or "%f" are ignored by printk() this works by chance most of the time. But for instructions with control registers like "lctl %c6,%c6,780" this fails because printk() interprets "%c" as character format specifier. Fix this problem and escape the '%' characters twice. For example "lctl %%%%c6,%%%%c6,780" is then converted by sprintf() into "lctl %%c6,%%c6,780" and by printk() into "lctl %c6,%c6,780". Signed-off-by: Michael Holzheu Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/dis.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c index 8140d10c6785..6e72961608f0 100644 --- a/arch/s390/kernel/dis.c +++ b/arch/s390/kernel/dis.c @@ -1920,16 +1920,23 @@ static int print_insn(char *buffer, unsigned char *code, unsigned long addr) } if (separator) ptr += sprintf(ptr, "%c", separator); + /* + * Use four '%' characters below because of the + * following two conversions: + * + * 1) sprintf: %%%%r -> %%r + * 2) printk : %%r -> %r + */ if (operand->flags & OPERAND_GPR) - ptr += sprintf(ptr, "%%r%i", value); + ptr += sprintf(ptr, "%%%%r%i", value); else if (operand->flags & OPERAND_FPR) - ptr += sprintf(ptr, "%%f%i", value); + ptr += sprintf(ptr, "%%%%f%i", value); else if (operand->flags & OPERAND_AR) - ptr += sprintf(ptr, "%%a%i", value); + ptr += sprintf(ptr, "%%%%a%i", value); else if (operand->flags & OPERAND_CR) - ptr += sprintf(ptr, "%%c%i", value); + ptr += sprintf(ptr, "%%%%c%i", value); else if (operand->flags & OPERAND_VR) - ptr += sprintf(ptr, "%%v%i", value); + ptr += sprintf(ptr, "%%%%v%i", value); else if (operand->flags & OPERAND_PCREL) ptr += sprintf(ptr, "%lx", (signed int) value + addr); -- cgit v1.2.3 From 0b4d6972d7b052b23d33ff9bdbb52958664fbb26 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 18 Dec 2015 10:13:50 -0800 Subject: ARM: dts: Fix UART wakeirq for omap4 duovero parlor Looks like we're missing the wakeirq for the console uart for duovero parlor. Let's add that as without it console acess just hangs with PM enabled. Cc: Arun Bharadwaj Cc: Ash Charles Cc: Florian Vaussard Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-duovero-parlor.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index 1a78f013f37a..b75f7b2b7c4a 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -189,3 +189,7 @@ }; }; +&uart3 { + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART3_RX>; +}; -- cgit v1.2.3 From d90167a941f62860f35eb960e1012aa2d30e7e94 Mon Sep 17 00:00:00 2001 From: Ashok Raj Date: Thu, 10 Dec 2015 11:12:26 +0100 Subject: x86/mce: Ensure offline CPUs don't participate in rendezvous process Intel's MCA implementation broadcasts MCEs to all CPUs on the node. This poses a problem for offlined CPUs which cannot participate in the rendezvous process: Kernel panic - not syncing: Timeout: Not all CPUs entered broadcast exception handler Kernel Offset: disabled Rebooting in 100 seconds.. More specifically, Linux does a soft offline of a CPU when writing a 0 to /sys/devices/system/cpu/cpuX/online, which doesn't prevent the #MC exception from being broadcasted to that CPU. Ensure that offline CPUs don't participate in the MCE rendezvous and clear the RIP valid status bit so that a second MCE won't cause a shutdown. Without the patch, mce_start() will increment mce_callin and wait for all CPUs. Offlined CPUs should avoid participating in the rendezvous process altogether. Signed-off-by: Ashok Raj [ Massage commit message. ] Signed-off-by: Borislav Petkov Reviewed-by: Tony Luck Cc: Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-edac Link: http://lkml.kernel.org/r/1449742346-21470-2-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/mcheck/mce.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index c5b0d562dbf5..7e8a736d09db 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -999,6 +999,17 @@ void do_machine_check(struct pt_regs *regs, long error_code) int flags = MF_ACTION_REQUIRED; int lmce = 0; + /* If this CPU is offline, just bail out. */ + if (cpu_is_offline(smp_processor_id())) { + u64 mcgstatus; + + mcgstatus = mce_rdmsrl(MSR_IA32_MCG_STATUS); + if (mcgstatus & MCG_STATUS_RIPV) { + mce_wrmsrl(MSR_IA32_MCG_STATUS, 0); + return; + } + } + ist_enter(regs); this_cpu_inc(mce_exception_count); -- cgit v1.2.3 From 91e2eea98f94a2ebb143d4c4cdeaa4573d62dc17 Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Thu, 19 Nov 2015 16:55:45 -0500 Subject: x86/xen: Avoid fast syscall path for Xen PV guests After 32-bit syscall rewrite, and specifically after commit: 5f310f739b4c ("x86/entry/32: Re-implement SYSENTER using the new C path") ... the stack frame that is passed to xen_sysexit is no longer a "standard" one (i.e. it's not pt_regs). Since we end up calling xen_iret from xen_sysexit we don't need to fix up the stack and instead follow entry_SYSENTER_32's IRET path directly to xen_iret. We can do the same thing for compat mode even though stack does not need to be fixed. This will allow us to drop usergs_sysret32 paravirt op (in the subsequent patch) Suggested-by: Andy Lutomirski Signed-off-by: Boris Ostrovsky Reviewed-by: Borislav Petkov Acked-by: Andy Lutomirski Cc: Andrew Morton Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: david.vrabel@citrix.com Cc: konrad.wilk@oracle.com Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1447970147-1733-2-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/entry/entry_32.S | 5 +++-- arch/x86/entry/entry_64_compat.S | 10 ++++++---- arch/x86/include/asm/cpufeature.h | 1 + arch/x86/xen/enlighten.c | 4 +++- 4 files changed, 13 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S index 3eb572ed3d7a..0870825a9568 100644 --- a/arch/x86/entry/entry_32.S +++ b/arch/x86/entry/entry_32.S @@ -308,8 +308,9 @@ sysenter_past_esp: movl %esp, %eax call do_fast_syscall_32 - testl %eax, %eax - jz .Lsyscall_32_done + /* XEN PV guests always use IRET path */ + ALTERNATIVE "testl %eax, %eax; jz .Lsyscall_32_done", \ + "jmp .Lsyscall_32_done", X86_FEATURE_XENPV /* Opportunistic SYSEXIT */ TRACE_IRQS_ON /* User mode traces as IRQs on. */ diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S index c3201830a85e..402e34a21559 100644 --- a/arch/x86/entry/entry_64_compat.S +++ b/arch/x86/entry/entry_64_compat.S @@ -121,8 +121,9 @@ sysenter_flags_fixed: movq %rsp, %rdi call do_fast_syscall_32 - testl %eax, %eax - jz .Lsyscall_32_done + /* XEN PV guests always use IRET path */ + ALTERNATIVE "testl %eax, %eax; jz .Lsyscall_32_done", \ + "jmp .Lsyscall_32_done", X86_FEATURE_XENPV jmp sysret32_from_system_call sysenter_fix_flags: @@ -200,8 +201,9 @@ ENTRY(entry_SYSCALL_compat) movq %rsp, %rdi call do_fast_syscall_32 - testl %eax, %eax - jz .Lsyscall_32_done + /* XEN PV guests always use IRET path */ + ALTERNATIVE "testl %eax, %eax; jz .Lsyscall_32_done", \ + "jmp .Lsyscall_32_done", X86_FEATURE_XENPV /* Opportunistic SYSRET */ sysret32_from_system_call: diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index e4f8010f22e0..f7ba9fbf12ee 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -216,6 +216,7 @@ #define X86_FEATURE_PAUSEFILTER ( 8*32+13) /* AMD filtered pause intercept */ #define X86_FEATURE_PFTHRESHOLD ( 8*32+14) /* AMD pause filter threshold */ #define X86_FEATURE_VMMCALL ( 8*32+15) /* Prefer vmmcall to vmcall */ +#define X86_FEATURE_XENPV ( 8*32+16) /* "" Xen paravirtual guest */ /* Intel-defined CPU features, CPUID level 0x00000007:0 (ebx), word 9 */ diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 5774800ff583..d315151411e5 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1886,8 +1886,10 @@ EXPORT_SYMBOL_GPL(xen_hvm_need_lapic); static void xen_set_cpu_features(struct cpuinfo_x86 *c) { - if (xen_pv_domain()) + if (xen_pv_domain()) { clear_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS); + set_cpu_cap(c, X86_FEATURE_XENPV); + } } const struct hypervisor_x86 x86_hyper_xen = { -- cgit v1.2.3 From d8c98a1d1488747625ad6044d423406e17e99b7a Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Fri, 11 Dec 2015 09:07:53 -0500 Subject: x86/paravirt: Prevent rtc_cmos platform device init on PV guests Adding the rtc platform device in non-privileged Xen PV guests causes an IRQ conflict because these guests do not have legacy PIC and may allocate irqs in the legacy range. In a single VCPU Xen PV guest we should have: /proc/interrupts: CPU0 0: 4934 xen-percpu-virq timer0 1: 0 xen-percpu-ipi spinlock0 2: 0 xen-percpu-ipi resched0 3: 0 xen-percpu-ipi callfunc0 4: 0 xen-percpu-virq debug0 5: 0 xen-percpu-ipi callfuncsingle0 6: 0 xen-percpu-ipi irqwork0 7: 321 xen-dyn-event xenbus 8: 90 xen-dyn-event hvc_console ... But hvc_console cannot get its interrupt because it is already in use by rtc0 and the console does not work. genirq: Flags mismatch irq 8. 00000000 (hvc_console) vs. 00000000 (rtc0) We can avoid this problem by realizing that unprivileged PV guests (both Xen and lguests) are not supposed to have rtc_cmos device and so adding it is not necessary. Privileged guests (i.e. Xen's dom0) do use it but they should not have irq conflicts since they allocate irqs above legacy range (above gsi_top, in fact). Instead of explicitly testing whether the guest is privileged we can extend pv_info structure to include information about guest's RTC support. Reported-and-tested-by: Sander Eikelenboom Signed-off-by: David Vrabel Signed-off-by: Boris Ostrovsky Cc: vkuznets@redhat.com Cc: xen-devel@lists.xenproject.org Cc: konrad.wilk@oracle.com Cc: stable@vger.kernel.org # 4.2+ Link: http://lkml.kernel.org/r/1449842873-2613-1-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/paravirt.h | 6 ++++++ arch/x86/include/asm/paravirt_types.h | 5 +++++ arch/x86/include/asm/processor.h | 1 + arch/x86/kernel/rtc.c | 3 +++ arch/x86/lguest/boot.c | 1 + arch/x86/xen/enlighten.c | 4 +++- 6 files changed, 19 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h index 10d0596433f8..c759b3cca663 100644 --- a/arch/x86/include/asm/paravirt.h +++ b/arch/x86/include/asm/paravirt.h @@ -19,6 +19,12 @@ static inline int paravirt_enabled(void) return pv_info.paravirt_enabled; } +static inline int paravirt_has_feature(unsigned int feature) +{ + WARN_ON_ONCE(!pv_info.paravirt_enabled); + return (pv_info.features & feature); +} + static inline void load_sp0(struct tss_struct *tss, struct thread_struct *thread) { diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h index 31247b5bff7c..3d44191185f8 100644 --- a/arch/x86/include/asm/paravirt_types.h +++ b/arch/x86/include/asm/paravirt_types.h @@ -70,9 +70,14 @@ struct pv_info { #endif int paravirt_enabled; + unsigned int features; /* valid only if paravirt_enabled is set */ const char *name; }; +#define paravirt_has(x) paravirt_has_feature(PV_SUPPORTED_##x) +/* Supported features */ +#define PV_SUPPORTED_RTC (1<<0) + struct pv_init_ops { /* * Patch may replace one of the defined code sequences with diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index 67522256c7ff..2d5a50cb61a2 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -472,6 +472,7 @@ static inline unsigned long current_top_of_stack(void) #else #define __cpuid native_cpuid #define paravirt_enabled() 0 +#define paravirt_has(x) 0 static inline void load_sp0(struct tss_struct *tss, struct thread_struct *thread) diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c index cd9685235df9..4af8d063fb36 100644 --- a/arch/x86/kernel/rtc.c +++ b/arch/x86/kernel/rtc.c @@ -200,6 +200,9 @@ static __init int add_rtc_cmos(void) } #endif + if (paravirt_enabled() && !paravirt_has(RTC)) + return -ENODEV; + platform_device_register(&rtc_device); dev_info(&rtc_device.dev, "registered platform RTC device (no PNP device found)\n"); diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index a0d09f6c6533..a43b2eafc466 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -1414,6 +1414,7 @@ __init void lguest_init(void) pv_info.kernel_rpl = 1; /* Everyone except Xen runs with this set. */ pv_info.shared_kernel_pmd = 1; + pv_info.features = 0; /* * We set up all the lguest overrides for sensitive operations. These diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index d315151411e5..b7de78bdc09c 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1192,7 +1192,7 @@ static const struct pv_info xen_info __initconst = { #ifdef CONFIG_X86_64 .extra_user_64bit_cs = FLAT_USER_CS64, #endif - + .features = 0, .name = "Xen", }; @@ -1535,6 +1535,8 @@ asmlinkage __visible void __init xen_start_kernel(void) /* Install Xen paravirt ops */ pv_info = xen_info; + if (xen_initial_domain()) + pv_info.features |= PV_SUPPORTED_RTC; pv_init_ops = xen_init_ops; pv_apic_ops = xen_apic_ops; if (!xen_pvh_domain()) { -- cgit v1.2.3 From 899cfd2bb0d1953d78d14d5e912e13b8bd92a58f Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Sat, 19 Dec 2015 13:43:34 +0530 Subject: ARC: mm: HIGHMEM: Fix section mismatch splat | WARNING: vmlinux.o(.text+0xd6c2): Section mismatch in reference from the function alloc_kmap_pgtable() to the function | .init.text:__alloc_bootmem_low() The function alloc_kmap_pgtable() references the function __init __alloc_bootmem_low(). This is often because alloc_kmap_pgtable lacks a __init annotation or the annotation of __alloc_bootmem_low is wrong. Signed-off-by: Vineet Gupta --- arch/arc/mm/highmem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arc/mm/highmem.c b/arch/arc/mm/highmem.c index 065ee6bfa82a..92dd92cad7f9 100644 --- a/arch/arc/mm/highmem.c +++ b/arch/arc/mm/highmem.c @@ -111,7 +111,7 @@ void __kunmap_atomic(void *kv) } EXPORT_SYMBOL(__kunmap_atomic); -noinline pte_t *alloc_kmap_pgtable(unsigned long kvaddr) +static noinline pte_t * __init alloc_kmap_pgtable(unsigned long kvaddr) { pgd_t *pgd_k; pud_t *pud_k; @@ -127,7 +127,7 @@ noinline pte_t *alloc_kmap_pgtable(unsigned long kvaddr) return pte_k; } -void kmap_init(void) +void __init kmap_init(void) { /* Due to recursive include hell, we can't do this in processor.h */ BUILD_BUG_ON(PAGE_OFFSET < (VMALLOC_END + FIXMAP_SIZE + PKMAP_SIZE)); -- cgit v1.2.3 From 4b32e89af7a054ae3f84f388cb622aeeb8beec9d Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Fri, 18 Dec 2015 22:28:51 +0300 Subject: ARC: mm: fix building for MMU v2 ARC700 cores with MMU v2 don't have IC_PTAG AUX register and so we only define ARC_REG_IC_PTAG for MMU versions >= 3. But current implementation of cache_line_loop_vX() routines assumes availability of all of them (v2, v3 and v4) simultaneously. And given undefined ARC_REG_IC_PTAG if CONFIG_MMU_VER=2 we're seeing compilation problem: ---------------------------------->8------------------------------- CC arch/arc/mm/cache.o arch/arc/mm/cache.c: In function '__cache_line_loop_v3': arch/arc/mm/cache.c:270:13: error: 'ARC_REG_IC_PTAG' undeclared (first use in this function) aux_tag = ARC_REG_IC_PTAG; ^ arch/arc/mm/cache.c:270:13: note: each undeclared identifier is reported only once for each function it appears in scripts/Makefile.build:258: recipe for target 'arch/arc/mm/cache.o' failed ---------------------------------->8------------------------------- The simples fix is to have ARC_REG_IC_PTAG defined regardless MMU version being used. We don't use it in cache_line_loop_v2() anyways so who cares. Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta --- arch/arc/include/asm/cache.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index abf06e81c929..210ef3e72332 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -62,9 +62,7 @@ extern int ioc_exists; #define ARC_REG_IC_IVIC 0x10 #define ARC_REG_IC_CTRL 0x11 #define ARC_REG_IC_IVIL 0x19 -#if defined(CONFIG_ARC_MMU_V3) || defined(CONFIG_ARC_MMU_V4) #define ARC_REG_IC_PTAG 0x1E -#endif #define ARC_REG_IC_PTAG_HI 0x1F /* Bit val in IC_CTRL */ -- cgit v1.2.3 From 07fd7d4bbcb9a7c741c7e67e715680d9e5835ff2 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 21 Dec 2015 12:38:01 +0530 Subject: ARC: Fix linking errors with CONFIG_MODULE + CONFIG_CC_OPTIMIZE_FOR_SIZE At -Os, ARC gcc generates millicode thunk for function prologue/epilogue, which are served by libgcc. Modules historically are NOT linked with libgcc to avoid code bloat, reducing runtime relocation fixups etc. I even once tried doing that but got lost in makefile intricacies. This means modules at -Os don't get the millicode thunks, causing build failures below: | MODPOST 5 modules | ERROR: "__ld_r13_to_r18" [crypto/sha256_generic.ko] undefined! | ERROR: "__ld_r13_to_r18_ret" [crypto/sha256_generic.ko] undefined! | ERROR: "__st_r13_to_r18" [crypto/sha256_generic.ko] undefined! | ERROR: "__ld_r13_to_r17_ret" [crypto/sha256_generic.ko] undefined! | ERROR: "__st_r13_to_r17" [crypto/sha256_generic.ko] undefined! | ERROR: "__ld_r13_to_r16_ret" [crypto/sha256_generic.ko] undefined! | ERROR: "__st_r13_to_r16" [crypto/sha256_generic.ko] undefined! |.... |.... Workaround that by inhibiting millicode thunks for loadable modules Fixes STAR 9000641864: ("Linux built with optimizations for size emits errors for modules") Reported-by: Anton Kolesov Cc: Michal Marek Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta --- arch/arc/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arc/Makefile b/arch/arc/Makefile index cf0cf34eeb24..aeb19021099e 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -81,7 +81,7 @@ endif LIBGCC := $(shell $(CC) $(cflags-y) --print-libgcc-file-name) # Modules with short calls might break for calls into builtin-kernel -KBUILD_CFLAGS_MODULE += -mlong-calls +KBUILD_CFLAGS_MODULE += -mlong-calls -mno-millicode # Finally dump eveything into kernel build system KBUILD_CFLAGS += $(cflags-y) -- cgit v1.2.3 From 2d64affc92d6281d2eca4faad326b981773bf040 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 21 Dec 2015 13:29:44 +0530 Subject: Revert "ARC: dw2 unwind: Ignore CIE version !=1 gracefully instead of bailing" Blingly ignoring CIE.version != 1 was a bad idea. It still leaves "desirability" when running perf with callgraphing where libgcc symbols might show in hotspot. More importantly, basic CIE.version == 3 support already exists in code: | | retAddrReg = state.version <= 1 ? *ptr++ : get_uleb128(&ptr, end); | Next commit with simply add continue-not-bail for CIE.version != 1 This reverts commit 323f41f9e7d0cb5b1d1586aded6682855f1e646d. --- arch/arc/kernel/unwind.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c index cf2828ab0905..9f9ecc15556e 100644 --- a/arch/arc/kernel/unwind.c +++ b/arch/arc/kernel/unwind.c @@ -293,13 +293,13 @@ static void init_unwind_hdr(struct unwind_table *table, const u32 *cie = cie_for_fde(fde, table); signed ptrType; - if (cie == ¬_fde) /* only process FDE here */ + if (cie == ¬_fde) continue; if (cie == NULL || cie == &bad_cie) - continue; /* say FDE->CIE.version != 1 */ + return; ptrType = fde_pointer_type(cie); if (ptrType < 0) - continue; + return; ptr = (const u8 *)(fde + 2); if (!read_pointer(&ptr, (const u8 *)(fde + 1) + *fde, @@ -343,10 +343,6 @@ static void init_unwind_hdr(struct unwind_table *table, if (fde[1] == 0xffffffff) continue; /* this is a CIE */ - - if (*(u8 *)(cie + 2) != 1) - continue; /* FDE->CIE.version not supported */ - ptr = (const u8 *)(fde + 2); header->table[n].start = read_pointer(&ptr, (const u8 *)(fde + 1) + @@ -523,8 +519,7 @@ static const u32 *cie_for_fde(const u32 *fde, const struct unwind_table *table) if (*cie <= sizeof(*cie) + 4 || *cie >= fde[1] - sizeof(*fde) || (*cie & (sizeof(*cie) - 1)) - || (cie[1] != 0xffffffff) - || ( *(u8 *)(cie + 2) != 1)) /* version 1 supported */ + || (cie[1] != 0xffffffff)) return NULL; /* this is not a (valid) CIE */ return cie; } -- cgit v1.2.3 From 6d0d506012c93d3393b8d3d0cac62e46e541c5b6 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 21 Dec 2015 13:40:05 +0530 Subject: ARC: dw2 unwind: Don't bail for CIE.version != 1 The rudimentary CIE.version == 3 handling is already present in code (for return address register specification) Signed-off-by: Vineet Gupta --- arch/arc/kernel/unwind.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c index 9f9ecc15556e..f34599abe182 100644 --- a/arch/arc/kernel/unwind.c +++ b/arch/arc/kernel/unwind.c @@ -600,9 +600,6 @@ static signed fde_pointer_type(const u32 *cie) const u8 *ptr = (const u8 *)(cie + 2); unsigned version = *ptr; - if (version != 1) - return -1; /* unsupported */ - if (*++ptr) { const char *aug; const u8 *end = (const u8 *)(cie + 1) + *cie; @@ -1014,9 +1011,7 @@ int arc_unwind(struct unwind_frame_info *frame) ptr = (const u8 *)(cie + 2); end = (const u8 *)(cie + 1) + *cie; frame->call_frame = 1; - if ((state.version = *ptr) != 1) - cie = NULL; /* unsupported version */ - else if (*++ptr) { + if (*++ptr) { /* check if augmentation size is first (thus present) */ if (*ptr == 'z') { while (++ptr < end && *ptr) { -- cgit v1.2.3 From 6b538db7c6b091960c57b23feae5431fc82286e7 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 21 Dec 2015 13:52:01 +0530 Subject: ARC: dw2 unwind: Catch Dwarf SNAFUs early Instead of seeing empty stack traces, let kernel fail early so dwarf issues can be fixed sooner Signed-off-by: Vineet Gupta --- arch/arc/kernel/unwind.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c index f34599abe182..5eb707640e9c 100644 --- a/arch/arc/kernel/unwind.c +++ b/arch/arc/kernel/unwind.c @@ -296,10 +296,10 @@ static void init_unwind_hdr(struct unwind_table *table, if (cie == ¬_fde) continue; if (cie == NULL || cie == &bad_cie) - return; + goto ret_err; ptrType = fde_pointer_type(cie); if (ptrType < 0) - return; + goto ret_err; ptr = (const u8 *)(fde + 2); if (!read_pointer(&ptr, (const u8 *)(fde + 1) + *fde, @@ -315,14 +315,14 @@ static void init_unwind_hdr(struct unwind_table *table, } if (tableSize || !n) - return; + goto ret_err; hdrSize = 4 + sizeof(unsigned long) + sizeof(unsigned int) + 2 * n * sizeof(unsigned long); header = alloc(hdrSize); if (!header) - return; + goto ret_err; header->version = 1; header->eh_frame_ptr_enc = DW_EH_PE_abs | DW_EH_PE_native; @@ -361,6 +361,10 @@ static void init_unwind_hdr(struct unwind_table *table, table->hdrsz = hdrSize; smp_wmb(); table->header = (const void *)header; + return; + +ret_err: + panic("Attention !!! Dwarf FDE parsing errors\n");; } #ifdef CONFIG_MODULES -- cgit v1.2.3 From 71a71fb5374a23be36a91981b5614590b9e722c3 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 21 Dec 2015 10:03:30 +0100 Subject: parisc: Fix syscall restarts On parisc syscalls which are interrupted by signals sometimes failed to restart and instead returned -ENOSYS which in the worst case lead to userspace crashes. A similiar problem existed on MIPS and was fixed by commit e967ef02 ("MIPS: Fix restart of indirect syscalls"). On parisc the current syscall restart code assumes that all syscall callers load the syscall number in the delay slot of the ble instruction. That's how it is e.g. done in the unistd.h header file: ble 0x100(%sr2, %r0) ldi #syscall_nr, %r20 Because of that assumption the current code never restored %r20 before returning to userspace. This assumption is at least not true for code which uses the glibc syscall() function, which instead uses this syntax: ble 0x100(%sr2, %r0) copy regX, %r20 where regX depend on how the compiler optimizes the code and register usage. This patch fixes this problem by adding code to analyze how the syscall number is loaded in the delay branch and - if needed - copy the syscall number to regX prior returning to userspace for the syscall restart. Signed-off-by: Helge Deller Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers --- arch/parisc/kernel/signal.c | 64 ++++++++++++++++++++++++++++++++++++--------- 1 file changed, 52 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index dc1ea796fd60..2264f68f3c2f 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -435,6 +435,55 @@ handle_signal(struct ksignal *ksig, struct pt_regs *regs, int in_syscall) regs->gr[28]); } +/* + * Check how the syscall number gets loaded into %r20 within + * the delay branch in userspace and adjust as needed. + */ + +static void check_syscallno_in_delay_branch(struct pt_regs *regs) +{ + u32 opcode, source_reg; + u32 __user *uaddr; + int err; + + /* Usually we don't have to restore %r20 (the system call number) + * because it gets loaded in the delay slot of the branch external + * instruction via the ldi instruction. + * In some cases a register-to-register copy instruction might have + * been used instead, in which case we need to copy the syscall + * number into the source register before returning to userspace. + */ + + /* A syscall is just a branch, so all we have to do is fiddle the + * return pointer so that the ble instruction gets executed again. + */ + regs->gr[31] -= 8; /* delayed branching */ + + /* Get assembler opcode of code in delay branch */ + uaddr = (unsigned int *) ((regs->gr[31] & ~3) + 4); + err = get_user(opcode, uaddr); + if (err) + return; + + /* Check if delay branch uses "ldi int,%r20" */ + if ((opcode & 0xffff0000) == 0x34140000) + return; /* everything ok, just return */ + + /* Check if delay branch uses "nop" */ + if (opcode == INSN_NOP) + return; + + /* Check if delay branch uses "copy %rX,%r20" */ + if ((opcode & 0xffe0ffff) == 0x08000254) { + source_reg = (opcode >> 16) & 31; + regs->gr[source_reg] = regs->gr[20]; + return; + } + + pr_warn("syscall restart: %s (pid %d): unexpected opcode 0x%08x\n", + current->comm, task_pid_nr(current), opcode); +} + static inline void syscall_restart(struct pt_regs *regs, struct k_sigaction *ka) { @@ -457,10 +506,7 @@ syscall_restart(struct pt_regs *regs, struct k_sigaction *ka) } /* fallthrough */ case -ERESTARTNOINTR: - /* A syscall is just a branch, so all - * we have to do is fiddle the return pointer. - */ - regs->gr[31] -= 8; /* delayed branching */ + check_syscallno_in_delay_branch(regs); break; } } @@ -510,15 +556,9 @@ insert_restart_trampoline(struct pt_regs *regs) } case -ERESTARTNOHAND: case -ERESTARTSYS: - case -ERESTARTNOINTR: { - /* Hooray for delayed branching. We don't - * have to restore %r20 (the system call - * number) because it gets loaded in the delay - * slot of the branch external instruction. - */ - regs->gr[31] -= 8; + case -ERESTARTNOINTR: + check_syscallno_in_delay_branch(regs); return; - } default: break; } -- cgit v1.2.3 From 6a613ac6bc015f8ef75806d397d69dbac4a8d8c4 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Wed, 16 Dec 2015 23:18:47 -0800 Subject: x86/entry: Fix some comments Signed-off-by: Andy Lutomirski Reviewed-and-tested-by: Borislav Petkov Cc: Cc: Su Tao Cc: Denys Vlasenko Cc: Cc: Cc: Cc: Brian Gerst Cc: Mingwei Shi Cc: Linus Torvalds Signed-off-by: Thomas Gleixner --- arch/x86/entry/entry_32.S | 2 +- arch/x86/entry/vdso/vdso32/system_call.S | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S index 0870825a9568..fcad8ac30a8e 100644 --- a/arch/x86/entry/entry_32.S +++ b/arch/x86/entry/entry_32.S @@ -292,7 +292,7 @@ ENTRY(entry_SYSENTER_32) movl TSS_sysenter_sp0(%esp), %esp sysenter_past_esp: pushl $__USER_DS /* pt_regs->ss */ - pushl %ecx /* pt_regs->cx */ + pushl %ecx /* pt_regs->sp (stashed in cx) */ pushfl /* pt_regs->flags (except IF = 0) */ orl $X86_EFLAGS_IF, (%esp) /* Fix IF */ pushl $__USER_CS /* pt_regs->cs */ diff --git a/arch/x86/entry/vdso/vdso32/system_call.S b/arch/x86/entry/vdso/vdso32/system_call.S index 93bd8452383f..8f42b1b9e8df 100644 --- a/arch/x86/entry/vdso/vdso32/system_call.S +++ b/arch/x86/entry/vdso/vdso32/system_call.S @@ -1,5 +1,5 @@ /* - * Code for the vDSO. This version uses the old int $0x80 method. + * AT_SYSINFO entry point */ #include -- cgit v1.2.3 From 30bfa7b3488bfb1bb75c9f50a5fcac1832970c60 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Wed, 16 Dec 2015 23:18:48 -0800 Subject: x86/entry: Restore traditional SYSENTER calling convention It turns out that some Android versions hardcode the SYSENTER calling convention. This is buggy and will cause problems no matter what the kernel does. Nonetheless, we should try to support it. Credit goes to Linus for pointing out a clean way to handle the SYSENTER/SYSCALL clobber differences while preserving straightforward DWARF annotations. I believe that the original offending Android commit was: https://android.googlesource.com/platform%2Fbionic/+/7dc3684d7a2587e43e6d2a8e0e3f39bf759bd535 Reported-by: Qiuxu Zhuo Signed-off-by: Andy Lutomirski Reviewed-and-tested-by: Borislav Petkov Cc: Cc: Su Tao Cc: Denys Vlasenko Cc: Cc: Cc: Brian Gerst Cc: Mingwei Shi Cc: Linus Torvalds Signed-off-by: Thomas Gleixner --- arch/x86/entry/common.c | 6 ++-- arch/x86/entry/entry_32.S | 2 +- arch/x86/entry/entry_64_compat.S | 10 +++--- arch/x86/entry/vdso/vdso32/system_call.S | 52 ++++++++++++++++++++++++++------ 4 files changed, 51 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c index a89fdbc1f0be..03663740c866 100644 --- a/arch/x86/entry/common.c +++ b/arch/x86/entry/common.c @@ -421,7 +421,7 @@ __visible long do_fast_syscall_32(struct pt_regs *regs) regs->ip = landing_pad; /* - * Fetch ECX from where the vDSO stashed it. + * Fetch EBP from where the vDSO stashed it. * * WARNING: We are in CONTEXT_USER and RCU isn't paying attention! */ @@ -432,10 +432,10 @@ __visible long do_fast_syscall_32(struct pt_regs *regs) * Micro-optimization: the pointer we're following is explicitly * 32 bits, so it can't be out of range. */ - __get_user(*(u32 *)®s->cx, + __get_user(*(u32 *)®s->bp, (u32 __user __force *)(unsigned long)(u32)regs->sp) #else - get_user(*(u32 *)®s->cx, + get_user(*(u32 *)®s->bp, (u32 __user __force *)(unsigned long)(u32)regs->sp) #endif ) { diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S index fcad8ac30a8e..f3b6d54e0042 100644 --- a/arch/x86/entry/entry_32.S +++ b/arch/x86/entry/entry_32.S @@ -292,7 +292,7 @@ ENTRY(entry_SYSENTER_32) movl TSS_sysenter_sp0(%esp), %esp sysenter_past_esp: pushl $__USER_DS /* pt_regs->ss */ - pushl %ecx /* pt_regs->sp (stashed in cx) */ + pushl %ebp /* pt_regs->sp (stashed in bp) */ pushfl /* pt_regs->flags (except IF = 0) */ orl $X86_EFLAGS_IF, (%esp) /* Fix IF */ pushl $__USER_CS /* pt_regs->cs */ diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S index 402e34a21559..6a1ae3751e82 100644 --- a/arch/x86/entry/entry_64_compat.S +++ b/arch/x86/entry/entry_64_compat.S @@ -63,7 +63,7 @@ ENTRY(entry_SYSENTER_compat) /* Construct struct pt_regs on stack */ pushq $__USER32_DS /* pt_regs->ss */ - pushq %rcx /* pt_regs->sp */ + pushq %rbp /* pt_regs->sp (stashed in bp) */ /* * Push flags. This is nasty. First, interrupts are currently @@ -82,14 +82,14 @@ ENTRY(entry_SYSENTER_compat) pushq %rdi /* pt_regs->di */ pushq %rsi /* pt_regs->si */ pushq %rdx /* pt_regs->dx */ - pushq %rcx /* pt_regs->cx (will be overwritten) */ + pushq %rcx /* pt_regs->cx */ pushq $-ENOSYS /* pt_regs->ax */ pushq %r8 /* pt_regs->r8 = 0 */ pushq %r8 /* pt_regs->r9 = 0 */ pushq %r8 /* pt_regs->r10 = 0 */ pushq %r8 /* pt_regs->r11 = 0 */ pushq %rbx /* pt_regs->rbx */ - pushq %rbp /* pt_regs->rbp */ + pushq %rbp /* pt_regs->rbp (will be overwritten) */ pushq %r8 /* pt_regs->r12 = 0 */ pushq %r8 /* pt_regs->r13 = 0 */ pushq %r8 /* pt_regs->r14 = 0 */ @@ -179,7 +179,7 @@ ENTRY(entry_SYSCALL_compat) pushq %rdi /* pt_regs->di */ pushq %rsi /* pt_regs->si */ pushq %rdx /* pt_regs->dx */ - pushq %rcx /* pt_regs->cx (will be overwritten) */ + pushq %rbp /* pt_regs->cx (stashed in bp) */ pushq $-ENOSYS /* pt_regs->ax */ xorq %r8,%r8 pushq %r8 /* pt_regs->r8 = 0 */ @@ -187,7 +187,7 @@ ENTRY(entry_SYSCALL_compat) pushq %r8 /* pt_regs->r10 = 0 */ pushq %r8 /* pt_regs->r11 = 0 */ pushq %rbx /* pt_regs->rbx */ - pushq %rbp /* pt_regs->rbp */ + pushq %rbp /* pt_regs->rbp (will be overwritten) */ pushq %r8 /* pt_regs->r12 = 0 */ pushq %r8 /* pt_regs->r13 = 0 */ pushq %r8 /* pt_regs->r14 = 0 */ diff --git a/arch/x86/entry/vdso/vdso32/system_call.S b/arch/x86/entry/vdso/vdso32/system_call.S index 8f42b1b9e8df..3a1d9297074b 100644 --- a/arch/x86/entry/vdso/vdso32/system_call.S +++ b/arch/x86/entry/vdso/vdso32/system_call.S @@ -21,35 +21,67 @@ __kernel_vsyscall: /* * Reshuffle regs so that all of any of the entry instructions * will preserve enough state. + * + * A really nice entry sequence would be: + * pushl %edx + * pushl %ecx + * movl %esp, %ecx + * + * Unfortunately, naughty Android versions between July and December + * 2015 actually hardcode the traditional Linux SYSENTER entry + * sequence. That is severely broken for a number of reasons (ask + * anyone with an AMD CPU, for example). Nonetheless, we try to keep + * it working approximately as well as it ever worked. + * + * This link may eludicate some of the history: + * https://android-review.googlesource.com/#/q/Iac3295376d61ef83e713ac9b528f3b50aa780cd7 + * personally, I find it hard to understand what's going on there. + * + * Note to future user developers: DO NOT USE SYSENTER IN YOUR CODE. + * Execute an indirect call to the address in the AT_SYSINFO auxv + * entry. That is the ONLY correct way to make a fast 32-bit system + * call on Linux. (Open-coding int $0x80 is also fine, but it's + * slow.) */ + pushl %ecx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ecx, 0 pushl %edx CFI_ADJUST_CFA_OFFSET 4 CFI_REL_OFFSET edx, 0 - pushl %ecx + pushl %ebp CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET ecx, 0 - movl %esp, %ecx + CFI_REL_OFFSET ebp, 0 + + #define SYSENTER_SEQUENCE "movl %esp, %ebp; sysenter" + #define SYSCALL_SEQUENCE "movl %ecx, %ebp; syscall" #ifdef CONFIG_X86_64 /* If SYSENTER (Intel) or SYSCALL32 (AMD) is available, use it. */ - ALTERNATIVE_2 "", "sysenter", X86_FEATURE_SYSENTER32, \ - "syscall", X86_FEATURE_SYSCALL32 + ALTERNATIVE_2 "", SYSENTER_SEQUENCE, X86_FEATURE_SYSENTER32, \ + SYSCALL_SEQUENCE, X86_FEATURE_SYSCALL32 #else - ALTERNATIVE "", "sysenter", X86_FEATURE_SEP + ALTERNATIVE "", SYSENTER_SEQUENCE, X86_FEATURE_SEP #endif /* Enter using int $0x80 */ - movl (%esp), %ecx int $0x80 GLOBAL(int80_landing_pad) - /* Restore ECX and EDX in case they were clobbered. */ - popl %ecx - CFI_RESTORE ecx + /* + * Restore EDX and ECX in case they were clobbered. EBP is not + * clobbered (the kernel restores it), but it's cleaner and + * probably faster to pop it than to adjust ESP using addl. + */ + popl %ebp + CFI_RESTORE ebp CFI_ADJUST_CFA_OFFSET -4 popl %edx CFI_RESTORE edx CFI_ADJUST_CFA_OFFSET -4 + popl %ecx + CFI_RESTORE ecx + CFI_ADJUST_CFA_OFFSET -4 ret CFI_ENDPROC -- cgit v1.2.3 From 5dc62fdd8383afbd2faca6b6e6ea1052b45b0124 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Wed, 5 Aug 2015 16:41:37 +0100 Subject: MIPS: uaccess: Fix strlen_user with EVA The strlen_user() function calls __strlen_kernel_asm in both branches of the eva_kernel_access() conditional. For EVA it should be calling __strlen_user_eva for user accesses, otherwise it will load from the kernel address space instead of the user address space, and the access checking will likely be ineffective at preventing it due to EVA's overlapping user and kernel address spaces. This was found after extending the test_user_copy module to cover user string access functions, which gave the following error with EVA: test_user_copy: illegal strlen_user passed Fortunately the use of strlen_user() has been all but eradicated from the mainline kernel, so only out of tree modules could be affected. Fixes: e3a9b07a9caf ("MIPS: asm: uaccess: Add EVA support for str*_user operations") Signed-off-by: James Hogan Cc: Markos Chandras Cc: Paul Burton Cc: Leonid Yegoshin Cc: linux-mips@linux-mips.org Cc: # 3.15.x- Patchwork: https://patchwork.linux-mips.org/patch/10842/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/uaccess.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h index 5305d694ffe5..3f959c01bfdb 100644 --- a/arch/mips/include/asm/uaccess.h +++ b/arch/mips/include/asm/uaccess.h @@ -1384,7 +1384,7 @@ static inline long strlen_user(const char __user *s) might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" - __MODULE_JAL(__strlen_kernel_asm) + __MODULE_JAL(__strlen_user_asm) "move\t%0, $2" : "=r" (res) : "r" (s) -- cgit v1.2.3 From 6f06a2c45d8d714ea3b11a360b4a7191e52acaa4 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Wed, 5 Aug 2015 16:41:38 +0100 Subject: MIPS: uaccess: Take EVA into account in __copy_from_user() When EVA is in use, __copy_from_user() was unconditionally using the EVA instructions to read the user address space, however this can also be used for kernel access. If the address isn't a valid user address it will cause an address error or TLB exception, and if it is then user memory may be read instead of kernel memory. For example in the following stack trace from Linux v3.10 (changes since then will prevent this particular one still happening) kernel_sendmsg() set the user address limit to KERNEL_DS, and tcp_sendmsg() goes on to use __copy_from_user() with a kernel address in KSeg0. [<8002d434>] __copy_fromuser_common+0x10c/0x254 [<805710e0>] tcp_sendmsg+0x5f4/0xf00 [<804e8e3c>] sock_sendmsg+0x78/0xa0 [<804e8f28>] kernel_sendmsg+0x24/0x38 [<804ee0f8>] sock_no_sendpage+0x70/0x7c [<8017c820>] pipe_to_sendpage+0x80/0x98 [<8017c6b0>] splice_from_pipe_feed+0xa8/0x198 [<8017cc54>] __splice_from_pipe+0x4c/0x8c [<8017e844>] splice_from_pipe+0x58/0x78 [<8017e884>] generic_splice_sendpage+0x20/0x2c [<8017d690>] do_splice_from+0xb4/0x110 [<8017d710>] direct_splice_actor+0x24/0x30 [<8017d394>] splice_direct_to_actor+0xd8/0x208 [<8017d51c>] do_splice_direct+0x58/0x7c [<8014eaf4>] do_sendfile+0x1dc/0x39c [<8014f82c>] SyS_sendfile+0x90/0xf8 Add the eva_kernel_access() check in __copy_from_user() like the one in copy_from_user(). Signed-off-by: James Hogan Cc: Markos Chandras Cc: Paul Burton Cc: Leonid Yegoshin Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10843/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/uaccess.h | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h index 3f959c01bfdb..5014e187df23 100644 --- a/arch/mips/include/asm/uaccess.h +++ b/arch/mips/include/asm/uaccess.h @@ -1122,9 +1122,15 @@ extern size_t __copy_in_user_eva(void *__to, const void *__from, size_t __n); __cu_to = (to); \ __cu_from = (from); \ __cu_len = (n); \ - might_fault(); \ - __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ - __cu_len); \ + if (eva_kernel_access()) { \ + __cu_len = __invoke_copy_from_kernel(__cu_to, \ + __cu_from, \ + __cu_len); \ + } else { \ + might_fault(); \ + __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ + __cu_len); \ + } \ __cu_len; \ }) -- cgit v1.2.3 From d6a428fb583738ad685c91a684748cdee7b2a05f Mon Sep 17 00:00:00 2001 From: James Hogan Date: Wed, 5 Aug 2015 16:41:39 +0100 Subject: MIPS: uaccess: Take EVA into account in [__]clear_user __clear_user() (and clear_user() which uses it), always access the user mode address space, which results in EVA store instructions when EVA is enabled even if the current user address limit is KERNEL_DS. Fix this by adding a new symbol __bzero_kernel for the normal kernel address space bzero in EVA mode, and call that from __clear_user() if eva_kernel_access(). Signed-off-by: James Hogan Cc: Markos Chandras Cc: Paul Burton Cc: Leonid Yegoshin Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10844/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/uaccess.h | 32 ++++++++++++++++++++++---------- arch/mips/kernel/mips_ksyms.c | 2 ++ arch/mips/lib/memset.S | 2 ++ 3 files changed, 26 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h index 5014e187df23..2e3b3991cf0b 100644 --- a/arch/mips/include/asm/uaccess.h +++ b/arch/mips/include/asm/uaccess.h @@ -1235,16 +1235,28 @@ __clear_user(void __user *addr, __kernel_size_t size) { __kernel_size_t res; - might_fault(); - __asm__ __volatile__( - "move\t$4, %1\n\t" - "move\t$5, $0\n\t" - "move\t$6, %2\n\t" - __MODULE_JAL(__bzero) - "move\t%0, $6" - : "=r" (res) - : "r" (addr), "r" (size) - : "$4", "$5", "$6", __UA_t0, __UA_t1, "$31"); + if (eva_kernel_access()) { + __asm__ __volatile__( + "move\t$4, %1\n\t" + "move\t$5, $0\n\t" + "move\t$6, %2\n\t" + __MODULE_JAL(__bzero_kernel) + "move\t%0, $6" + : "=r" (res) + : "r" (addr), "r" (size) + : "$4", "$5", "$6", __UA_t0, __UA_t1, "$31"); + } else { + might_fault(); + __asm__ __volatile__( + "move\t$4, %1\n\t" + "move\t$5, $0\n\t" + "move\t$6, %2\n\t" + __MODULE_JAL(__bzero) + "move\t%0, $6" + : "=r" (res) + : "r" (addr), "r" (size) + : "$4", "$5", "$6", __UA_t0, __UA_t1, "$31"); + } return res; } diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c index 291af0b5c482..e2b6ab74643d 100644 --- a/arch/mips/kernel/mips_ksyms.c +++ b/arch/mips/kernel/mips_ksyms.c @@ -17,6 +17,7 @@ #include #include +extern void *__bzero_kernel(void *__s, size_t __count); extern void *__bzero(void *__s, size_t __count); extern long __strncpy_from_kernel_nocheck_asm(char *__to, const char *__from, long __len); @@ -64,6 +65,7 @@ EXPORT_SYMBOL(__copy_from_user_eva); EXPORT_SYMBOL(__copy_in_user_eva); EXPORT_SYMBOL(__copy_to_user_eva); EXPORT_SYMBOL(__copy_user_inatomic_eva); +EXPORT_SYMBOL(__bzero_kernel); #endif EXPORT_SYMBOL(__bzero); EXPORT_SYMBOL(__strncpy_from_kernel_nocheck_asm); diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S index b8e63fd00375..8f0019a2e5c8 100644 --- a/arch/mips/lib/memset.S +++ b/arch/mips/lib/memset.S @@ -283,6 +283,8 @@ LEAF(memset) 1: #ifndef CONFIG_EVA FEXPORT(__bzero) +#else +FEXPORT(__bzero_kernel) #endif __BUILD_BZERO LEGACY_MODE -- cgit v1.2.3 From f3575e230cf8537951ebe3cc19974c5db2ff4f1c Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Wed, 5 Aug 2015 15:42:40 -0700 Subject: MIPS: CPS: drop .set mips64r2 directives Commit 977e043d5ea1 ("MIPS: kernel: cps-vec: Replace mips32r2 ISA level with mips64r2") leads to .set mips64r2 directives being present in 32 bit (ie. CONFIG_32BIT=y) kernels. This is incorrect & leads to MIPS64 instructions being emitted by the assembler when expanding pseudo-instructions. For example the "move" instruction can legitimately be expanded to a "daddu". This causes problems when the kernel is run on a MIPS32 CPU, as CONFIG_32BIT kernels of course often are... Fix this by dropping the .set directives entirely now that Kconfig should be ensuring that kernels including this code are built with a suitable -march= compiler flag. Signed-off-by: Paul Burton Cc: Markos Chandras Cc: James Hogan Cc: # 3.16+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10869/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/cps-vec.S | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S index 8fd5a276cad2..ac81edd44563 100644 --- a/arch/mips/kernel/cps-vec.S +++ b/arch/mips/kernel/cps-vec.S @@ -257,7 +257,6 @@ LEAF(mips_cps_core_init) has_mt t0, 3f .set push - .set mips64r2 .set mt /* Only allow 1 TC per VPE to execute... */ @@ -376,7 +375,6 @@ LEAF(mips_cps_boot_vpes) nop .set push - .set mips64r2 .set mt 1: /* Enter VPE configuration state */ -- cgit v1.2.3 From 2a037f310bab89b7db5b86c7954cf69c229c87ca Mon Sep 17 00:00:00 2001 From: Qais Yousef Date: Tue, 8 Dec 2015 10:11:43 +0000 Subject: MIPS: VDSO: Fix build error Commit ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") introduced a build error. For MIPS VDSO to be compiled it requires binutils version 2.25 or above but the check in the Makefile had inverted logic causing it to be compiled in if binutils is below 2.25. This fixes the following compilation error: CC arch/mips/vdso/gettimeofday.o /tmp/ccsExcUd.s: Assembler messages: /tmp/ccsExcUd.s:62: Error: can't resolve `_start' {*UND* section} - `L0' {.text section} /tmp/ccsExcUd.s:467: Error: can't resolve `_start' {*UND* section} - `L0' {.text section} make[2]: *** [arch/mips/vdso/gettimeofday.o] Error 1 make[1]: *** [arch/mips/vdso] Error 2 make: *** [arch/mips] Error 2 [ralf@linux-mips: Fixed Sergei's complaint on the formatting of the cited commit and generally reformatted the log message.] Signed-off-by: Qais Yousef Cc: alex@alex-smith.me.uk Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11745/ Signed-off-by: Ralf Baechle --- arch/mips/vdso/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile index ef5f348f386a..018f8c7b94f2 100644 --- a/arch/mips/vdso/Makefile +++ b/arch/mips/vdso/Makefile @@ -26,8 +26,8 @@ aflags-vdso := $(ccflags-vdso) \ # the comments on that file. # ifndef CONFIG_CPU_MIPSR6 - ifeq ($(call ld-ifversion, -gt, 22400000, y),) - $(warning MIPS VDSO requires binutils > 2.24) + ifeq ($(call ld-ifversion, -lt, 22500000, y),) + $(warning MIPS VDSO requires binutils >= 2.25) obj-vdso-y := $(filter-out gettimeofday.o, $(obj-vdso-y)) ccflags-vdso += -DDISABLE_MIPS_VDSO endif -- cgit v1.2.3 From ec7b97208aaed46bd3fbe166d5909228c380a720 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 27 Nov 2015 19:17:01 +0100 Subject: MIPS: Fix build error due to unused variables. c861519fcf95b2d46cb4275903423b43ae150a40 ("MIPS: Fix delay loops which may be removed by GCC.") which made it upstream was an outdated version of the patch and is lacking some the removal of two variables that became unused thus resulting in further warnings and build breakage. The commit from ae878615d7cee5d7346946cf1ae1b60e427013c2 was correct however. Signed-off-by: Ralf Baechle --- arch/mips/pci/pci-rt2880.c | 1 - arch/mips/pmcs-msp71xx/msp_setup.c | 1 - arch/mips/sni/reset.c | 2 +- 3 files changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/pci/pci-rt2880.c b/arch/mips/pci/pci-rt2880.c index dbbeccc3d714..a245cad4372a 100644 --- a/arch/mips/pci/pci-rt2880.c +++ b/arch/mips/pci/pci-rt2880.c @@ -221,7 +221,6 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) static int rt288x_pci_probe(struct platform_device *pdev) { void __iomem *io_map_base; - int i; rt2880_pci_base = ioremap_nocache(RT2880_PCI_BASE, PAGE_SIZE); diff --git a/arch/mips/pmcs-msp71xx/msp_setup.c b/arch/mips/pmcs-msp71xx/msp_setup.c index 78b2ef49dbc7..9d293b3e9130 100644 --- a/arch/mips/pmcs-msp71xx/msp_setup.c +++ b/arch/mips/pmcs-msp71xx/msp_setup.c @@ -39,7 +39,6 @@ extern void msp_serial_setup(void); void msp7120_reset(void) { void *start, *end, *iptr; - register int i; /* Diasble all interrupts */ local_irq_disable(); diff --git a/arch/mips/sni/reset.c b/arch/mips/sni/reset.c index db8f88b6a3af..6afa34346b81 100644 --- a/arch/mips/sni/reset.c +++ b/arch/mips/sni/reset.c @@ -26,7 +26,7 @@ static inline void kb_wait(void) /* XXX This ends up at the ARC firmware prompt ... */ void sni_machine_restart(char *command) { - int i, j; + int i; /* This does a normal via the keyboard controller like a PC. We can do that easier ... */ -- cgit v1.2.3 From a7f2d7865720ff13d5b0f2a3bb1fd80dc3d7a73f Mon Sep 17 00:00:00 2001 From: Alexis Dambricourt Date: Mon, 14 Dec 2015 15:39:34 +0100 Subject: KVM: MTRR: fix fixed MTRR segment look up This fixes the slow-down of VM running with pci-passthrough, since some MTRR range changed from MTRR_TYPE_WRBACK to MTRR_TYPE_UNCACHABLE. Memory in the 0K-640K range was incorrectly treated as uncacheable. Fixes: f7bfb57b3e89ff89c0da9f93dedab89f68d6ca27 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561 Cc: qemu-stable@nongnu.org Signed-off-by: Alexis Dambricourt [Use correct BZ for "Fixes" annotation. - Paolo] Signed-off-by: Paolo Bonzini --- arch/x86/kvm/mtrr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kvm/mtrr.c b/arch/x86/kvm/mtrr.c index 9e8bf13572e6..adc54e1d40a9 100644 --- a/arch/x86/kvm/mtrr.c +++ b/arch/x86/kvm/mtrr.c @@ -267,7 +267,7 @@ static int fixed_mtrr_addr_to_seg(u64 addr) for (seg = 0; seg < seg_num; seg++) { mtrr_seg = &fixed_seg_table[seg]; - if (mtrr_seg->start >= addr && addr < mtrr_seg->end) + if (mtrr_seg->start <= addr && addr < mtrr_seg->end) return seg; } -- cgit v1.2.3 From fa7c4ebd5ae0c22f9908436303106a9ffcf0cf42 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Mon, 14 Dec 2015 16:57:31 +0100 Subject: KVM: MTRR: observe maxphyaddr from guest CPUID, not host Conversion of MTRRs to ranges used the maxphyaddr from the boot CPU. This is wrong, because var_mtrr_range's mask variable then is discontiguous (like FF00FFFF000, where the first run of 0s corresponds to the bits between host and guest maxphyaddr). Instead always set up the masks to be full 64-bit values---we know that the reserved bits at the top are zero, and we can restore them when reading the MSR. This way var_mtrr_range gets a mask that just works. Fixes: a13842dc668b40daef4327294a6d3bdc8bd30276 Cc: qemu-stable@nongnu.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561 Signed-off-by: Paolo Bonzini --- arch/x86/kvm/mtrr.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kvm/mtrr.c b/arch/x86/kvm/mtrr.c index adc54e1d40a9..7747b6d716fa 100644 --- a/arch/x86/kvm/mtrr.c +++ b/arch/x86/kvm/mtrr.c @@ -300,7 +300,6 @@ static void var_mtrr_range(struct kvm_mtrr_range *range, u64 *start, u64 *end) *start = range->base & PAGE_MASK; mask = range->mask & PAGE_MASK; - mask |= ~0ULL << boot_cpu_data.x86_phys_bits; /* This cannot overflow because writing to the reserved bits of * variable MTRRs causes a #GP. @@ -356,10 +355,14 @@ static void set_var_mtrr_msr(struct kvm_vcpu *vcpu, u32 msr, u64 data) if (var_mtrr_range_is_valid(cur)) list_del(&mtrr_state->var_ranges[index].node); + /* Extend the mask with all 1 bits to the left, since those + * bits must implicitly be 0. The bits are then cleared + * when reading them. + */ if (!is_mtrr_mask) cur->base = data; else - cur->mask = data; + cur->mask = data | (-1LL << cpuid_maxphyaddr(vcpu)); /* add it to the list if it's enabled. */ if (var_mtrr_range_is_valid(cur)) { @@ -426,6 +429,8 @@ int kvm_mtrr_get_msr(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata) *pdata = vcpu->arch.mtrr_state.var_ranges[index].base; else *pdata = vcpu->arch.mtrr_state.var_ranges[index].mask; + + *pdata &= (1ULL << cpuid_maxphyaddr(vcpu)) - 1; } return 0; -- cgit v1.2.3 From e24dea2afc6a0852983dc741072d8e96155e13f5 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Tue, 22 Dec 2015 15:20:00 +0100 Subject: KVM: MTRR: treat memory as writeback if MTRR is disabled in guest CPUID Virtual machines can be run with CPUID such that there are no MTRRs. In that case, the firmware will never enable MTRRs and it is obviously undesirable to run the guest entirely with UC memory. Check out guest CPUID, and use WB memory if MTRR do not exist. Cc: qemu-stable@nongnu.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561 Signed-off-by: Paolo Bonzini --- arch/x86/kvm/cpuid.h | 8 ++++++++ arch/x86/kvm/mtrr.c | 14 +++++++++++--- 2 files changed, 19 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h index 06332cb7e7d1..3f5c48ddba45 100644 --- a/arch/x86/kvm/cpuid.h +++ b/arch/x86/kvm/cpuid.h @@ -38,6 +38,14 @@ static inline bool guest_cpuid_has_xsave(struct kvm_vcpu *vcpu) return best && (best->ecx & bit(X86_FEATURE_XSAVE)); } +static inline bool guest_cpuid_has_mtrr(struct kvm_vcpu *vcpu) +{ + struct kvm_cpuid_entry2 *best; + + best = kvm_find_cpuid_entry(vcpu, 1, 0); + return best && (best->edx & bit(X86_FEATURE_MTRR)); +} + static inline bool guest_cpuid_has_tsc_adjust(struct kvm_vcpu *vcpu) { struct kvm_cpuid_entry2 *best; diff --git a/arch/x86/kvm/mtrr.c b/arch/x86/kvm/mtrr.c index 7747b6d716fa..3f8c732117ec 100644 --- a/arch/x86/kvm/mtrr.c +++ b/arch/x86/kvm/mtrr.c @@ -120,14 +120,22 @@ static u8 mtrr_default_type(struct kvm_mtrr *mtrr_state) return mtrr_state->deftype & IA32_MTRR_DEF_TYPE_TYPE_MASK; } -static u8 mtrr_disabled_type(void) +static u8 mtrr_disabled_type(struct kvm_vcpu *vcpu) { /* * Intel SDM 11.11.2.2: all MTRRs are disabled when * IA32_MTRR_DEF_TYPE.E bit is cleared, and the UC * memory type is applied to all of physical memory. + * + * However, virtual machines can be run with CPUID such that + * there are no MTRRs. In that case, the firmware will never + * enable MTRRs and it is obviously undesirable to run the + * guest entirely with UC memory and we use WB. */ - return MTRR_TYPE_UNCACHABLE; + if (guest_cpuid_has_mtrr(vcpu)) + return MTRR_TYPE_UNCACHABLE; + else + return MTRR_TYPE_WRBACK; } /* @@ -675,7 +683,7 @@ u8 kvm_mtrr_get_guest_memory_type(struct kvm_vcpu *vcpu, gfn_t gfn) } if (iter.mtrr_disabled) - return mtrr_disabled_type(); + return mtrr_disabled_type(vcpu); /* not contained in any MTRRs. */ if (type == -1) -- cgit v1.2.3 From 0185604c2d82c560dab2f2933a18f797e74ab5a8 Mon Sep 17 00:00:00 2001 From: Andrew Honig Date: Wed, 18 Nov 2015 14:50:23 -0800 Subject: KVM: x86: Reload pit counters for all channels when restoring state Currently if userspace restores the pit counters with a count of 0 on channels 1 or 2 and the guest attempts to read the count on those channels, then KVM will perform a mod of 0 and crash. This will ensure that 0 values are converted to 65536 as per the spec. This is CVE-2015-7513. Signed-off-by: Andy Honig Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index b84ba4b17757..7ffc224bbe41 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -3572,9 +3572,11 @@ static int kvm_vm_ioctl_get_pit(struct kvm *kvm, struct kvm_pit_state *ps) static int kvm_vm_ioctl_set_pit(struct kvm *kvm, struct kvm_pit_state *ps) { + int i; mutex_lock(&kvm->arch.vpit->pit_state.lock); memcpy(&kvm->arch.vpit->pit_state, ps, sizeof(struct kvm_pit_state)); - kvm_pit_load_count(kvm, 0, ps->channels[0].count, 0); + for (i = 0; i < 3; i++) + kvm_pit_load_count(kvm, i, ps->channels[i].count, 0); mutex_unlock(&kvm->arch.vpit->pit_state.lock); return 0; } @@ -3593,6 +3595,7 @@ static int kvm_vm_ioctl_get_pit2(struct kvm *kvm, struct kvm_pit_state2 *ps) static int kvm_vm_ioctl_set_pit2(struct kvm *kvm, struct kvm_pit_state2 *ps) { int start = 0; + int i; u32 prev_legacy, cur_legacy; mutex_lock(&kvm->arch.vpit->pit_state.lock); prev_legacy = kvm->arch.vpit->pit_state.flags & KVM_PIT_FLAGS_HPET_LEGACY; @@ -3602,7 +3605,8 @@ static int kvm_vm_ioctl_set_pit2(struct kvm *kvm, struct kvm_pit_state2 *ps) memcpy(&kvm->arch.vpit->pit_state.channels, &ps->channels, sizeof(kvm->arch.vpit->pit_state.channels)); kvm->arch.vpit->pit_state.flags = ps->flags; - kvm_pit_load_count(kvm, 0, kvm->arch.vpit->pit_state.channels[0].count, start); + for (i = 0; i < 3; i++) + kvm_pit_load_count(kvm, i, kvm->arch.vpit->pit_state.channels[i].count, start); mutex_unlock(&kvm->arch.vpit->pit_state.lock); return 0; } -- cgit v1.2.3 From de3793796f78e293cc0873744a75588c99ed2fdd Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micka=C3=ABl=20Sala=C3=BCn?= Date: Tue, 22 Dec 2015 21:44:01 +0100 Subject: um: Fix pointer cast MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix a pointer cast typo introduced in v4.4-rc5 especially visible for the i386 subarchitecture where it results in a kernel crash. [ Also removed pointless cast as per Al Viro - Linus ] Fixes: 8090bfd2bb9a ("um: Fix fpstate handling") Signed-off-by: Mickaël Salaün Cc: Jeff Dike Acked-by: Richard Weinberger Signed-off-by: Linus Torvalds --- arch/x86/um/signal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/um/signal.c b/arch/x86/um/signal.c index e5f854ce2d72..14fcd01ed992 100644 --- a/arch/x86/um/signal.c +++ b/arch/x86/um/signal.c @@ -470,7 +470,7 @@ long sys_sigreturn(void) struct sigcontext __user *sc = &frame->sc; int sig_size = (_NSIG_WORDS - 1) * sizeof(unsigned long); - if (copy_from_user(&set.sig[0], (void *)sc->oldmask, sizeof(set.sig[0])) || + if (copy_from_user(&set.sig[0], &sc->oldmask, sizeof(set.sig[0])) || copy_from_user(&set.sig[1], frame->extramask, sig_size)) goto segfault; -- cgit v1.2.3 From 80373d37bee562060ce4d3e5272b708e8db5d1fc Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Tue, 8 Dec 2015 10:26:49 +0000 Subject: ARM: tegra: Fix suspend hang on Tegra124 Chromebooks Enabling CPUFreq support for Tegra124 Chromebooks is causing the Tegra124 to hang when resuming from suspend. When CPUFreq is enabled, the CPU clock is changed from the PLLX clock to the DFLL clock during kernel boot. When resuming from suspend the CPU clock is temporarily changed back to the PLLX clock before switching back to the DFLL. If the DFLL is operating at a much lower frequency than the PLLX when we enter suspend, and so the CPU voltage rail is at a voltage too low for the CPUs to operate at the PLLX frequency, then the device will hang. Please note that the PLLX is used in the resume sequence to switch the CPU clock from the very slow 32K clock to a faster clock during early resume to speed up the resume sequence before the DFLL is resumed. Ideally, we should fix this by setting the suspend frequency so that it matches the PLLX frequency, however, that would be a bigger change. For now simply disable CPUFreq support for Tegra124 Chromebooks to avoid the hang when resuming from suspend. Fixes: 9a0baee960a7 ("ARM: tegra: Enable CPUFreq support for Tegra124 Chromebooks") Signed-off-by: Jon Hunter Signed-off-by: Olof Johansson --- arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index 40c23a0b7cfc..ec1aa64ded68 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -399,7 +399,7 @@ /* CPU DFLL clock */ clock@0,70110000 { - status = "okay"; + status = "disabled"; vdd-cpu-supply = <&vdd_cpu>; nvidia,i2c-fs-rate = <400000>; }; -- cgit v1.2.3 From 9bcfd78ac0d19ef4c14b8b37eded26e5b3299e41 Mon Sep 17 00:00:00 2001 From: Mike Kravetz Date: Fri, 20 Nov 2015 15:54:06 -0800 Subject: sparc: Hook up userfaultfd system call After hooking up system call, userfaultfd selftest was successful for both 32 and 64 bit version of test. Signed-off-by: Mike Kravetz Signed-off-by: David S. Miller --- arch/sparc/include/uapi/asm/unistd.h | 3 ++- arch/sparc/kernel/systbls_32.S | 2 +- arch/sparc/kernel/systbls_64.S | 4 ++-- 3 files changed, 5 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sparc/include/uapi/asm/unistd.h b/arch/sparc/include/uapi/asm/unistd.h index efe9479f837b..f31a124a8497 100644 --- a/arch/sparc/include/uapi/asm/unistd.h +++ b/arch/sparc/include/uapi/asm/unistd.h @@ -417,8 +417,9 @@ #define __NR_bpf 349 #define __NR_execveat 350 #define __NR_membarrier 351 +#define __NR_userfaultfd 352 -#define NR_syscalls 352 +#define NR_syscalls 353 /* Bitmask values returned from kern_features system call. */ #define KERN_FEATURE_MIXED_MODE_STACK 0x00000001 diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index cc23b62b6e38..78e80293cb6d 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -87,4 +87,4 @@ sys_call_table: /*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev /*340*/ .long sys_ni_syscall, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr /*345*/ .long sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf -/*350*/ .long sys_execveat, sys_membarrier +/*350*/ .long sys_execveat, sys_membarrier, sys_userfaultfd diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index f229468a7479..2549c2c3ec2f 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -88,7 +88,7 @@ sys_call_table32: .word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev /*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr .word sys32_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf -/*350*/ .word sys32_execveat, sys_membarrier +/*350*/ .word sys32_execveat, sys_membarrier, sys_userfaultfd #endif /* CONFIG_COMPAT */ @@ -168,4 +168,4 @@ sys_call_table: .word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev /*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr .word sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf -/*350*/ .word sys64_execveat, sys_membarrier +/*350*/ .word sys64_execveat, sys_membarrier, sys_userfaultfd -- cgit v1.2.3 From 82924e542f20e645bc7de86e2889fe3fb0858566 Mon Sep 17 00:00:00 2001 From: Khalid Aziz Date: Thu, 17 Dec 2015 10:33:50 -0700 Subject: sparc64: Add ADI capability to cpu capabilities Add ADI (Application Data Integrity) capability to cpu capabilities list. ADI capability allows virtual addresses to be encoded with a tag in bits 63-60. This tag serves as an access control key for the regions of virtual address with ADI enabled and a key set on them. Hypervisor encodes this capability as "adp" in "hwcap-list" property in machine description. Signed-off-by: Khalid Aziz Signed-off-by: David S. Miller --- arch/sparc/include/asm/elf_64.h | 1 + arch/sparc/kernel/setup_64.c | 9 +++++---- 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sparc/include/asm/elf_64.h b/arch/sparc/include/asm/elf_64.h index 370ca1e71ffb..93310837c2df 100644 --- a/arch/sparc/include/asm/elf_64.h +++ b/arch/sparc/include/asm/elf_64.h @@ -95,6 +95,7 @@ * really available. So we simply advertise only "crypto" support. */ #define HWCAP_SPARC_CRYPTO 0x04000000 /* CRYPTO insns available */ +#define HWCAP_SPARC_ADI 0x08000000 /* ADI available */ #define CORE_DUMP_USE_REGSET diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c index f7b261749383..f3185e2b028b 100644 --- a/arch/sparc/kernel/setup_64.c +++ b/arch/sparc/kernel/setup_64.c @@ -380,7 +380,8 @@ static const char *hwcaps[] = { */ "mul32", "div32", "fsmuld", "v8plus", "popc", "vis", "vis2", "ASIBlkInit", "fmaf", "vis3", "hpc", "random", "trans", "fjfmau", - "ima", "cspare", "pause", "cbcond", + "ima", "cspare", "pause", "cbcond", NULL /*reserved for crypto */, + "adp", }; static const char *crypto_hwcaps[] = { @@ -396,7 +397,7 @@ void cpucap_info(struct seq_file *m) seq_puts(m, "cpucaps\t\t: "); for (i = 0; i < ARRAY_SIZE(hwcaps); i++) { unsigned long bit = 1UL << i; - if (caps & bit) { + if (hwcaps[i] && (caps & bit)) { seq_printf(m, "%s%s", printed ? "," : "", hwcaps[i]); printed++; @@ -450,7 +451,7 @@ static void __init report_hwcaps(unsigned long caps) for (i = 0; i < ARRAY_SIZE(hwcaps); i++) { unsigned long bit = 1UL << i; - if (caps & bit) + if (hwcaps[i] && (caps & bit)) report_one_hwcap(&printed, hwcaps[i]); } if (caps & HWCAP_SPARC_CRYPTO) @@ -485,7 +486,7 @@ static unsigned long __init mdesc_cpu_hwcap_list(void) for (i = 0; i < ARRAY_SIZE(hwcaps); i++) { unsigned long bit = 1UL << i; - if (!strcmp(prop, hwcaps[i])) { + if (hwcaps[i] && !strcmp(prop, hwcaps[i])) { caps |= bit; break; } -- cgit v1.2.3 From 1ca04a4ce0d5131471c5a1fac76899dc2d9d3f36 Mon Sep 17 00:00:00 2001 From: Rob Gardner Date: Mon, 21 Dec 2015 21:48:03 -0700 Subject: sparc64: Don't set %pil in rtrap_nmi too early Commit 28a1f53 delays setting %pil to avoid potential hardirq stack overflow in the common rtrap_irq path. Setting %pil also needs to be delayed in the rtrap_nmi path for the same reason. Signed-off-by: Rob Gardner Signed-off-by: Dave Aldridge Signed-off-by: David S. Miller --- arch/sparc/kernel/rtrap_64.S | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sparc/kernel/rtrap_64.S b/arch/sparc/kernel/rtrap_64.S index 39f0c662f4c8..d08bdaffdbfc 100644 --- a/arch/sparc/kernel/rtrap_64.S +++ b/arch/sparc/kernel/rtrap_64.S @@ -73,7 +73,13 @@ rtrap_nmi: ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1 andn %l1, %l4, %l1 srl %l4, 20, %l4 ba,pt %xcc, rtrap_no_irq_enable - wrpr %l4, %pil + nop + /* Do not actually set the %pil here. We will do that + * below after we clear PSTATE_IE in the %pstate register. + * If we re-enable interrupts here, we can recurse down + * the hardirq stack potentially endlessly, causing a + * stack overflow. + */ .align 64 .globl rtrap_irq, rtrap, irqsz_patchme, rtrap_xcall -- cgit v1.2.3 From 3f74306ac84cf7f2da2fdc87014fc455f5e67bad Mon Sep 17 00:00:00 2001 From: Rob Gardner Date: Tue, 22 Dec 2015 21:16:06 -0700 Subject: sparc64: Ensure perf can access user stacks When an interrupt (such as a perf counter interrupt) is delivered while executing in user space, the trap entry code puts ASI_AIUS in %asi so that copy_from_user() and copy_to_user() will access the correct memory. But if a perf counter interrupt is delivered while the cpu is already executing in kernel space, then the trap entry code will put ASI_P in %asi, and this will prevent copy_from_user() from reading any useful stack data in either of the perf_callchain_user_X functions, and thus no user callgraph data will be collected for this sample period. An additional problem is that a fault is guaranteed to occur, and though it will be silently covered up, it wastes time and could perturb state. In perf_callchain_user(), we ensure that %asi contains ASI_AIUS because we know for a fact that the subsequent calls to copy_from_user() are intended to read the user's stack. [ Use get_fs()/set_fs() -DaveM ] Signed-off-by: Rob Gardner Signed-off-by: Dave Aldridge Signed-off-by: David S. Miller --- arch/sparc/kernel/perf_event.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c index 3091267c5cc3..b1144d6acffe 100644 --- a/arch/sparc/kernel/perf_event.c +++ b/arch/sparc/kernel/perf_event.c @@ -1828,11 +1828,16 @@ static void perf_callchain_user_32(struct perf_callchain_entry *entry, void perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) { + mm_segment_t old_fs; + perf_callchain_store(entry, regs->tpc); if (!current->mm) return; + old_fs = get_fs(); + set_fs(USER_DS); + flushw_user(); pagefault_disable(); @@ -1843,4 +1848,6 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) perf_callchain_user_64(entry, regs); pagefault_enable(); + + set_fs(old_fs); } -- cgit v1.2.3 From 833526941f5945cf0b22a595bb8f3525b512f654 Mon Sep 17 00:00:00 2001 From: Rob Gardner Date: Tue, 22 Dec 2015 21:16:07 -0700 Subject: sparc64: Perf should save/restore fault info There have been several reports of random processes being killed with a bus error or segfault during userspace stack walking in perf. One of the root causes of this problem is an asynchronous modification to thread_info fault_address and fault_code, which stems from a perf counter interrupt arriving during kernel processing of a "benign" fault, such as a TSB miss. Since perf_callchain_user() invokes copy_from_user() to read user stacks, a fault is not only possible, but probable. Validity checks on the stack address merely cover up the problem and reduce its frequency. The solution here is to save and restore fault_address and fault_code in perf_callchain_user() so that the benign fault handler is not disturbed by a perf interrupt. Signed-off-by: Rob Gardner Signed-off-by: Dave Aldridge Signed-off-by: David S. Miller --- arch/sparc/kernel/perf_event.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c index b1144d6acffe..6596f66ce112 100644 --- a/arch/sparc/kernel/perf_event.c +++ b/arch/sparc/kernel/perf_event.c @@ -1828,6 +1828,8 @@ static void perf_callchain_user_32(struct perf_callchain_entry *entry, void perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) { + u64 saved_fault_address = current_thread_info()->fault_address; + u8 saved_fault_code = get_thread_fault_code(); mm_segment_t old_fs; perf_callchain_store(entry, regs->tpc); @@ -1850,4 +1852,6 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) pagefault_enable(); set_fs(old_fs); + set_thread_fault_code(saved_fault_code); + current_thread_info()->fault_address = saved_fault_address; } -- cgit v1.2.3 From a7c5724b5c17775ca8ea2fd9906d8a7e37337cce Mon Sep 17 00:00:00 2001 From: Rob Gardner Date: Tue, 22 Dec 2015 23:24:49 -0700 Subject: sparc64: fix FP corruption in user copy functions Short story: Exception handlers used by some copy_to_user() and copy_from_user() functions do not diligently clean up floating point register usage, and this can result in a user process seeing invalid values in floating point registers. This sometimes makes the process fail. Long story: Several cpu-specific (NG4, NG2, U1, U3) memcpy functions use floating point registers and VIS alignaddr/faligndata to accelerate data copying when source and dest addresses don't align well. Linux uses a lazy scheme for saving floating point registers; It is not done upon entering the kernel since it's a very expensive operation. Rather, it is done only when needed. If the kernel ends up not using FP regs during the course of some trap or system call, then it can return to user space without saving or restoring them. The various memcpy functions begin their FP code with VISEntry (or a variation thereof), which saves the FP regs. They conclude their FP code with VISExit (or a variation) which essentially marks the FP regs "clean", ie, they contain no unsaved values. fprs.FPRS_FEF is turned off so that a lazy restore will be triggered when/if the user process accesses floating point regs again. The bug is that the user copy variants of memcpy, copy_from_user() and copy_to_user(), employ an exception handling mechanism to detect faults when accessing user space addresses, and when this handler is invoked, an immediate return from the function is forced, and VISExit is not executed, thus leaving the fprs register in an indeterminate state, but often with fprs.FPRS_FEF set and one or more dirty bits. This results in a return to user space with invalid values in the FP regs, and since fprs.FPRS_FEF is on, no lazy restore occurs. This bug affects copy_to_user() and copy_from_user() for NG4, NG2, U3, and U1. All are fixed by using a new exception handler for those loads and stores that are done during the time between VISEnter and VISExit. n.b. In NG4memcpy, the problematic code can be triggered by a copy size greater than 128 bytes and an unaligned source address. This bug is known to be the cause of random user process memory corruptions while perf is running with the callgraph option (ie, perf record -g). This occurs because perf uses copy_from_user() to read user stacks, and may fault when it follows a stack frame pointer off to an invalid page. Validation checks on the stack address just obscure the underlying problem. Signed-off-by: Rob Gardner Signed-off-by: Dave Aldridge Signed-off-by: David S. Miller --- arch/sparc/kernel/head_64.S | 13 ++++ arch/sparc/lib/NG2copy_from_user.S | 8 +++ arch/sparc/lib/NG2copy_to_user.S | 8 +++ arch/sparc/lib/NG2memcpy.S | 118 +++++++++++++++++++------------------ arch/sparc/lib/NG4copy_from_user.S | 8 +++ arch/sparc/lib/NG4copy_to_user.S | 8 +++ arch/sparc/lib/NG4memcpy.S | 40 +++++++------ arch/sparc/lib/U1copy_from_user.S | 8 +++ arch/sparc/lib/U1copy_to_user.S | 8 +++ arch/sparc/lib/U1memcpy.S | 48 ++++++++------- arch/sparc/lib/U3copy_from_user.S | 8 +++ arch/sparc/lib/U3copy_to_user.S | 8 +++ arch/sparc/lib/U3memcpy.S | 86 ++++++++++++++------------- 13 files changed, 235 insertions(+), 134 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S index 3d61fcae7ee3..f2d30cab5b3f 100644 --- a/arch/sparc/kernel/head_64.S +++ b/arch/sparc/kernel/head_64.S @@ -946,6 +946,12 @@ ENTRY(__retl_one) mov 1, %o0 ENDPROC(__retl_one) +ENTRY(__retl_one_fp) + VISExitHalf + retl + mov 1, %o0 +ENDPROC(__retl_one_fp) + ENTRY(__ret_one_asi) wr %g0, ASI_AIUS, %asi ret @@ -958,6 +964,13 @@ ENTRY(__retl_one_asi) mov 1, %o0 ENDPROC(__retl_one_asi) +ENTRY(__retl_one_asi_fp) + wr %g0, ASI_AIUS, %asi + VISExitHalf + retl + mov 1, %o0 +ENDPROC(__retl_one_asi_fp) + ENTRY(__retl_o1) retl mov %o1, %o0 diff --git a/arch/sparc/lib/NG2copy_from_user.S b/arch/sparc/lib/NG2copy_from_user.S index 119ccb9a54f4..d5242b8c4f94 100644 --- a/arch/sparc/lib/NG2copy_from_user.S +++ b/arch/sparc/lib/NG2copy_from_user.S @@ -11,6 +11,14 @@ .text; \ .align 4; +#define EX_LD_FP(x) \ +98: x; \ + .section __ex_table,"a";\ + .align 4; \ + .word 98b, __retl_one_asi_fp;\ + .text; \ + .align 4; + #ifndef ASI_AIUS #define ASI_AIUS 0x11 #endif diff --git a/arch/sparc/lib/NG2copy_to_user.S b/arch/sparc/lib/NG2copy_to_user.S index 7fe1ccefd9d0..4e962d993b10 100644 --- a/arch/sparc/lib/NG2copy_to_user.S +++ b/arch/sparc/lib/NG2copy_to_user.S @@ -11,6 +11,14 @@ .text; \ .align 4; +#define EX_ST_FP(x) \ +98: x; \ + .section __ex_table,"a";\ + .align 4; \ + .word 98b, __retl_one_asi_fp;\ + .text; \ + .align 4; + #ifndef ASI_AIUS #define ASI_AIUS 0x11 #endif diff --git a/arch/sparc/lib/NG2memcpy.S b/arch/sparc/lib/NG2memcpy.S index 30eee6e8a81b..d5f585df2f3f 100644 --- a/arch/sparc/lib/NG2memcpy.S +++ b/arch/sparc/lib/NG2memcpy.S @@ -34,10 +34,16 @@ #ifndef EX_LD #define EX_LD(x) x #endif +#ifndef EX_LD_FP +#define EX_LD_FP(x) x +#endif #ifndef EX_ST #define EX_ST(x) x #endif +#ifndef EX_ST_FP +#define EX_ST_FP(x) x +#endif #ifndef EX_RETVAL #define EX_RETVAL(x) x @@ -134,40 +140,40 @@ fsrc2 %x6, %f12; \ fsrc2 %x7, %f14; #define FREG_LOAD_1(base, x0) \ - EX_LD(LOAD(ldd, base + 0x00, %x0)) + EX_LD_FP(LOAD(ldd, base + 0x00, %x0)) #define FREG_LOAD_2(base, x0, x1) \ - EX_LD(LOAD(ldd, base + 0x00, %x0)); \ - EX_LD(LOAD(ldd, base + 0x08, %x1)); + EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \ + EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); #define FREG_LOAD_3(base, x0, x1, x2) \ - EX_LD(LOAD(ldd, base + 0x00, %x0)); \ - EX_LD(LOAD(ldd, base + 0x08, %x1)); \ - EX_LD(LOAD(ldd, base + 0x10, %x2)); + EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \ + EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \ + EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); #define FREG_LOAD_4(base, x0, x1, x2, x3) \ - EX_LD(LOAD(ldd, base + 0x00, %x0)); \ - EX_LD(LOAD(ldd, base + 0x08, %x1)); \ - EX_LD(LOAD(ldd, base + 0x10, %x2)); \ - EX_LD(LOAD(ldd, base + 0x18, %x3)); + EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \ + EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \ + EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \ + EX_LD_FP(LOAD(ldd, base + 0x18, %x3)); #define FREG_LOAD_5(base, x0, x1, x2, x3, x4) \ - EX_LD(LOAD(ldd, base + 0x00, %x0)); \ - EX_LD(LOAD(ldd, base + 0x08, %x1)); \ - EX_LD(LOAD(ldd, base + 0x10, %x2)); \ - EX_LD(LOAD(ldd, base + 0x18, %x3)); \ - EX_LD(LOAD(ldd, base + 0x20, %x4)); + EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \ + EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \ + EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \ + EX_LD_FP(LOAD(ldd, base + 0x18, %x3)); \ + EX_LD_FP(LOAD(ldd, base + 0x20, %x4)); #define FREG_LOAD_6(base, x0, x1, x2, x3, x4, x5) \ - EX_LD(LOAD(ldd, base + 0x00, %x0)); \ - EX_LD(LOAD(ldd, base + 0x08, %x1)); \ - EX_LD(LOAD(ldd, base + 0x10, %x2)); \ - EX_LD(LOAD(ldd, base + 0x18, %x3)); \ - EX_LD(LOAD(ldd, base + 0x20, %x4)); \ - EX_LD(LOAD(ldd, base + 0x28, %x5)); + EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \ + EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \ + EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \ + EX_LD_FP(LOAD(ldd, base + 0x18, %x3)); \ + EX_LD_FP(LOAD(ldd, base + 0x20, %x4)); \ + EX_LD_FP(LOAD(ldd, base + 0x28, %x5)); #define FREG_LOAD_7(base, x0, x1, x2, x3, x4, x5, x6) \ - EX_LD(LOAD(ldd, base + 0x00, %x0)); \ - EX_LD(LOAD(ldd, base + 0x08, %x1)); \ - EX_LD(LOAD(ldd, base + 0x10, %x2)); \ - EX_LD(LOAD(ldd, base + 0x18, %x3)); \ - EX_LD(LOAD(ldd, base + 0x20, %x4)); \ - EX_LD(LOAD(ldd, base + 0x28, %x5)); \ - EX_LD(LOAD(ldd, base + 0x30, %x6)); + EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \ + EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \ + EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \ + EX_LD_FP(LOAD(ldd, base + 0x18, %x3)); \ + EX_LD_FP(LOAD(ldd, base + 0x20, %x4)); \ + EX_LD_FP(LOAD(ldd, base + 0x28, %x5)); \ + EX_LD_FP(LOAD(ldd, base + 0x30, %x6)); .register %g2,#scratch .register %g3,#scratch @@ -275,11 +281,11 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ nop /* fall through for 0 < low bits < 8 */ 110: sub %o4, 64, %g2 - EX_LD(LOAD_BLK(%g2, %f0)) -1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) - EX_LD(LOAD_BLK(%o4, %f16)) + EX_LD_FP(LOAD_BLK(%g2, %f0)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) + EX_LD_FP(LOAD_BLK(%o4, %f16)) FREG_FROB(f0, f2, f4, f6, f8, f10, f12, f14, f16) - EX_ST(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) FREG_MOVE_8(f16, f18, f20, f22, f24, f26, f28, f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -290,10 +296,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 120: sub %o4, 56, %g2 FREG_LOAD_7(%g2, f0, f2, f4, f6, f8, f10, f12) -1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) - EX_LD(LOAD_BLK(%o4, %f16)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) + EX_LD_FP(LOAD_BLK(%o4, %f16)) FREG_FROB(f0, f2, f4, f6, f8, f10, f12, f16, f18) - EX_ST(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) FREG_MOVE_7(f18, f20, f22, f24, f26, f28, f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -304,10 +310,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 130: sub %o4, 48, %g2 FREG_LOAD_6(%g2, f0, f2, f4, f6, f8, f10) -1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) - EX_LD(LOAD_BLK(%o4, %f16)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) + EX_LD_FP(LOAD_BLK(%o4, %f16)) FREG_FROB(f0, f2, f4, f6, f8, f10, f16, f18, f20) - EX_ST(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) FREG_MOVE_6(f20, f22, f24, f26, f28, f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -318,10 +324,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 140: sub %o4, 40, %g2 FREG_LOAD_5(%g2, f0, f2, f4, f6, f8) -1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) - EX_LD(LOAD_BLK(%o4, %f16)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) + EX_LD_FP(LOAD_BLK(%o4, %f16)) FREG_FROB(f0, f2, f4, f6, f8, f16, f18, f20, f22) - EX_ST(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) FREG_MOVE_5(f22, f24, f26, f28, f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -332,10 +338,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 150: sub %o4, 32, %g2 FREG_LOAD_4(%g2, f0, f2, f4, f6) -1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) - EX_LD(LOAD_BLK(%o4, %f16)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) + EX_LD_FP(LOAD_BLK(%o4, %f16)) FREG_FROB(f0, f2, f4, f6, f16, f18, f20, f22, f24) - EX_ST(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) FREG_MOVE_4(f24, f26, f28, f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -346,10 +352,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 160: sub %o4, 24, %g2 FREG_LOAD_3(%g2, f0, f2, f4) -1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) - EX_LD(LOAD_BLK(%o4, %f16)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) + EX_LD_FP(LOAD_BLK(%o4, %f16)) FREG_FROB(f0, f2, f4, f16, f18, f20, f22, f24, f26) - EX_ST(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) FREG_MOVE_3(f26, f28, f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -360,10 +366,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 170: sub %o4, 16, %g2 FREG_LOAD_2(%g2, f0, f2) -1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) - EX_LD(LOAD_BLK(%o4, %f16)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) + EX_LD_FP(LOAD_BLK(%o4, %f16)) FREG_FROB(f0, f2, f16, f18, f20, f22, f24, f26, f28) - EX_ST(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) FREG_MOVE_2(f28, f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -374,10 +380,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 180: sub %o4, 8, %g2 FREG_LOAD_1(%g2, f0) -1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) - EX_LD(LOAD_BLK(%o4, %f16)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) + EX_LD_FP(LOAD_BLK(%o4, %f16)) FREG_FROB(f0, f16, f18, f20, f22, f24, f26, f28, f30) - EX_ST(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) FREG_MOVE_1(f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -387,10 +393,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ nop 190: -1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) subcc %g1, 64, %g1 - EX_LD(LOAD_BLK(%o4, %f0)) - EX_ST(STORE_BLK(%f0, %o4 + %g3)) + EX_LD_FP(LOAD_BLK(%o4, %f0)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) add %o4, 64, %o4 bne,pt %xcc, 1b LOAD(prefetch, %o4 + 64, #one_read) diff --git a/arch/sparc/lib/NG4copy_from_user.S b/arch/sparc/lib/NG4copy_from_user.S index fd9f903ffa32..2e8ee7ad07a9 100644 --- a/arch/sparc/lib/NG4copy_from_user.S +++ b/arch/sparc/lib/NG4copy_from_user.S @@ -11,6 +11,14 @@ .text; \ .align 4; +#define EX_LD_FP(x) \ +98: x; \ + .section __ex_table,"a";\ + .align 4; \ + .word 98b, __retl_one_asi_fp;\ + .text; \ + .align 4; + #ifndef ASI_AIUS #define ASI_AIUS 0x11 #endif diff --git a/arch/sparc/lib/NG4copy_to_user.S b/arch/sparc/lib/NG4copy_to_user.S index 9744c4540a8d..be0bf4590df8 100644 --- a/arch/sparc/lib/NG4copy_to_user.S +++ b/arch/sparc/lib/NG4copy_to_user.S @@ -11,6 +11,14 @@ .text; \ .align 4; +#define EX_ST_FP(x) \ +98: x; \ + .section __ex_table,"a";\ + .align 4; \ + .word 98b, __retl_one_asi_fp;\ + .text; \ + .align 4; + #ifndef ASI_AIUS #define ASI_AIUS 0x11 #endif diff --git a/arch/sparc/lib/NG4memcpy.S b/arch/sparc/lib/NG4memcpy.S index 83aeeb1dffdb..8e13ee1f4454 100644 --- a/arch/sparc/lib/NG4memcpy.S +++ b/arch/sparc/lib/NG4memcpy.S @@ -48,10 +48,16 @@ #ifndef EX_LD #define EX_LD(x) x #endif +#ifndef EX_LD_FP +#define EX_LD_FP(x) x +#endif #ifndef EX_ST #define EX_ST(x) x #endif +#ifndef EX_ST_FP +#define EX_ST_FP(x) x +#endif #ifndef EX_RETVAL #define EX_RETVAL(x) x @@ -210,17 +216,17 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ sub %o2, %o4, %o2 alignaddr %o1, %g0, %g1 add %o1, %o4, %o1 - EX_LD(LOAD(ldd, %g1 + 0x00, %f0)) -1: EX_LD(LOAD(ldd, %g1 + 0x08, %f2)) + EX_LD_FP(LOAD(ldd, %g1 + 0x00, %f0)) +1: EX_LD_FP(LOAD(ldd, %g1 + 0x08, %f2)) subcc %o4, 0x40, %o4 - EX_LD(LOAD(ldd, %g1 + 0x10, %f4)) - EX_LD(LOAD(ldd, %g1 + 0x18, %f6)) - EX_LD(LOAD(ldd, %g1 + 0x20, %f8)) - EX_LD(LOAD(ldd, %g1 + 0x28, %f10)) - EX_LD(LOAD(ldd, %g1 + 0x30, %f12)) - EX_LD(LOAD(ldd, %g1 + 0x38, %f14)) + EX_LD_FP(LOAD(ldd, %g1 + 0x10, %f4)) + EX_LD_FP(LOAD(ldd, %g1 + 0x18, %f6)) + EX_LD_FP(LOAD(ldd, %g1 + 0x20, %f8)) + EX_LD_FP(LOAD(ldd, %g1 + 0x28, %f10)) + EX_LD_FP(LOAD(ldd, %g1 + 0x30, %f12)) + EX_LD_FP(LOAD(ldd, %g1 + 0x38, %f14)) faligndata %f0, %f2, %f16 - EX_LD(LOAD(ldd, %g1 + 0x40, %f0)) + EX_LD_FP(LOAD(ldd, %g1 + 0x40, %f0)) faligndata %f2, %f4, %f18 add %g1, 0x40, %g1 faligndata %f4, %f6, %f20 @@ -229,14 +235,14 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ faligndata %f10, %f12, %f26 faligndata %f12, %f14, %f28 faligndata %f14, %f0, %f30 - EX_ST(STORE(std, %f16, %o0 + 0x00)) - EX_ST(STORE(std, %f18, %o0 + 0x08)) - EX_ST(STORE(std, %f20, %o0 + 0x10)) - EX_ST(STORE(std, %f22, %o0 + 0x18)) - EX_ST(STORE(std, %f24, %o0 + 0x20)) - EX_ST(STORE(std, %f26, %o0 + 0x28)) - EX_ST(STORE(std, %f28, %o0 + 0x30)) - EX_ST(STORE(std, %f30, %o0 + 0x38)) + EX_ST_FP(STORE(std, %f16, %o0 + 0x00)) + EX_ST_FP(STORE(std, %f18, %o0 + 0x08)) + EX_ST_FP(STORE(std, %f20, %o0 + 0x10)) + EX_ST_FP(STORE(std, %f22, %o0 + 0x18)) + EX_ST_FP(STORE(std, %f24, %o0 + 0x20)) + EX_ST_FP(STORE(std, %f26, %o0 + 0x28)) + EX_ST_FP(STORE(std, %f28, %o0 + 0x30)) + EX_ST_FP(STORE(std, %f30, %o0 + 0x38)) add %o0, 0x40, %o0 bne,pt %icc, 1b LOAD(prefetch, %g1 + 0x200, #n_reads_strong) diff --git a/arch/sparc/lib/U1copy_from_user.S b/arch/sparc/lib/U1copy_from_user.S index a6ae2ea04bf5..ecc5692fa2b4 100644 --- a/arch/sparc/lib/U1copy_from_user.S +++ b/arch/sparc/lib/U1copy_from_user.S @@ -11,6 +11,14 @@ .text; \ .align 4; +#define EX_LD_FP(x) \ +98: x; \ + .section __ex_table,"a";\ + .align 4; \ + .word 98b, __retl_one_fp;\ + .text; \ + .align 4; + #define FUNC_NAME ___copy_from_user #define LOAD(type,addr,dest) type##a [addr] %asi, dest #define LOAD_BLK(addr,dest) ldda [addr] ASI_BLK_AIUS, dest diff --git a/arch/sparc/lib/U1copy_to_user.S b/arch/sparc/lib/U1copy_to_user.S index f4b970eeb485..9eea392e44d4 100644 --- a/arch/sparc/lib/U1copy_to_user.S +++ b/arch/sparc/lib/U1copy_to_user.S @@ -11,6 +11,14 @@ .text; \ .align 4; +#define EX_ST_FP(x) \ +98: x; \ + .section __ex_table,"a";\ + .align 4; \ + .word 98b, __retl_one_fp;\ + .text; \ + .align 4; + #define FUNC_NAME ___copy_to_user #define STORE(type,src,addr) type##a src, [addr] ASI_AIUS #define STORE_BLK(src,addr) stda src, [addr] ASI_BLK_AIUS diff --git a/arch/sparc/lib/U1memcpy.S b/arch/sparc/lib/U1memcpy.S index b67142b7768e..3e6209ebb7d7 100644 --- a/arch/sparc/lib/U1memcpy.S +++ b/arch/sparc/lib/U1memcpy.S @@ -25,10 +25,16 @@ #ifndef EX_LD #define EX_LD(x) x #endif +#ifndef EX_LD_FP +#define EX_LD_FP(x) x +#endif #ifndef EX_ST #define EX_ST(x) x #endif +#ifndef EX_ST_FP +#define EX_ST_FP(x) x +#endif #ifndef EX_RETVAL #define EX_RETVAL(x) x @@ -73,8 +79,8 @@ faligndata %f8, %f9, %f62; #define MAIN_LOOP_CHUNK(src, dest, fdest, fsrc, len, jmptgt) \ - EX_LD(LOAD_BLK(%src, %fdest)); \ - EX_ST(STORE_BLK(%fsrc, %dest)); \ + EX_LD_FP(LOAD_BLK(%src, %fdest)); \ + EX_ST_FP(STORE_BLK(%fsrc, %dest)); \ add %src, 0x40, %src; \ subcc %len, 0x40, %len; \ be,pn %xcc, jmptgt; \ @@ -89,12 +95,12 @@ #define DO_SYNC membar #Sync; #define STORE_SYNC(dest, fsrc) \ - EX_ST(STORE_BLK(%fsrc, %dest)); \ + EX_ST_FP(STORE_BLK(%fsrc, %dest)); \ add %dest, 0x40, %dest; \ DO_SYNC #define STORE_JUMP(dest, fsrc, target) \ - EX_ST(STORE_BLK(%fsrc, %dest)); \ + EX_ST_FP(STORE_BLK(%fsrc, %dest)); \ add %dest, 0x40, %dest; \ ba,pt %xcc, target; \ nop; @@ -103,7 +109,7 @@ subcc %left, 8, %left;\ bl,pn %xcc, 95f; \ faligndata %f0, %f1, %f48; \ - EX_ST(STORE(std, %f48, %dest)); \ + EX_ST_FP(STORE(std, %f48, %dest)); \ add %dest, 8, %dest; #define UNEVEN_VISCHUNK_LAST(dest, f0, f1, left) \ @@ -160,8 +166,8 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ and %g2, 0x38, %g2 1: subcc %g1, 0x1, %g1 - EX_LD(LOAD(ldub, %o1 + 0x00, %o3)) - EX_ST(STORE(stb, %o3, %o1 + %GLOBAL_SPARE)) + EX_LD_FP(LOAD(ldub, %o1 + 0x00, %o3)) + EX_ST_FP(STORE(stb, %o3, %o1 + %GLOBAL_SPARE)) bgu,pt %XCC, 1b add %o1, 0x1, %o1 @@ -172,20 +178,20 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ be,pt %icc, 3f alignaddr %o1, %g0, %o1 - EX_LD(LOAD(ldd, %o1, %f4)) -1: EX_LD(LOAD(ldd, %o1 + 0x8, %f6)) + EX_LD_FP(LOAD(ldd, %o1, %f4)) +1: EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f6)) add %o1, 0x8, %o1 subcc %g2, 0x8, %g2 faligndata %f4, %f6, %f0 - EX_ST(STORE(std, %f0, %o0)) + EX_ST_FP(STORE(std, %f0, %o0)) be,pn %icc, 3f add %o0, 0x8, %o0 - EX_LD(LOAD(ldd, %o1 + 0x8, %f4)) + EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f4)) add %o1, 0x8, %o1 subcc %g2, 0x8, %g2 faligndata %f6, %f4, %f0 - EX_ST(STORE(std, %f0, %o0)) + EX_ST_FP(STORE(std, %f0, %o0)) bne,pt %icc, 1b add %o0, 0x8, %o0 @@ -208,13 +214,13 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ add %g1, %GLOBAL_SPARE, %g1 subcc %o2, %g3, %o2 - EX_LD(LOAD_BLK(%o1, %f0)) + EX_LD_FP(LOAD_BLK(%o1, %f0)) add %o1, 0x40, %o1 add %g1, %g3, %g1 - EX_LD(LOAD_BLK(%o1, %f16)) + EX_LD_FP(LOAD_BLK(%o1, %f16)) add %o1, 0x40, %o1 sub %GLOBAL_SPARE, 0x80, %GLOBAL_SPARE - EX_LD(LOAD_BLK(%o1, %f32)) + EX_LD_FP(LOAD_BLK(%o1, %f32)) add %o1, 0x40, %o1 /* There are 8 instances of the unrolled loop, @@ -426,28 +432,28 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 62: FINISH_VISCHUNK(o0, f44, f46, g3) 63: UNEVEN_VISCHUNK_LAST(o0, f46, f0, g3) -93: EX_LD(LOAD(ldd, %o1, %f2)) +93: EX_LD_FP(LOAD(ldd, %o1, %f2)) add %o1, 8, %o1 subcc %g3, 8, %g3 faligndata %f0, %f2, %f8 - EX_ST(STORE(std, %f8, %o0)) + EX_ST_FP(STORE(std, %f8, %o0)) bl,pn %xcc, 95f add %o0, 8, %o0 - EX_LD(LOAD(ldd, %o1, %f0)) + EX_LD_FP(LOAD(ldd, %o1, %f0)) add %o1, 8, %o1 subcc %g3, 8, %g3 faligndata %f2, %f0, %f8 - EX_ST(STORE(std, %f8, %o0)) + EX_ST_FP(STORE(std, %f8, %o0)) bge,pt %xcc, 93b add %o0, 8, %o0 95: brz,pt %o2, 2f mov %g1, %o1 -1: EX_LD(LOAD(ldub, %o1, %o3)) +1: EX_LD_FP(LOAD(ldub, %o1, %o3)) add %o1, 1, %o1 subcc %o2, 1, %o2 - EX_ST(STORE(stb, %o3, %o0)) + EX_ST_FP(STORE(stb, %o3, %o0)) bne,pt %xcc, 1b add %o0, 1, %o0 diff --git a/arch/sparc/lib/U3copy_from_user.S b/arch/sparc/lib/U3copy_from_user.S index b1acd1331c33..88ad73d86fe4 100644 --- a/arch/sparc/lib/U3copy_from_user.S +++ b/arch/sparc/lib/U3copy_from_user.S @@ -11,6 +11,14 @@ .text; \ .align 4; +#define EX_LD_FP(x) \ +98: x; \ + .section __ex_table,"a";\ + .align 4; \ + .word 98b, __retl_one_fp;\ + .text; \ + .align 4; + #define FUNC_NAME U3copy_from_user #define LOAD(type,addr,dest) type##a [addr] %asi, dest #define EX_RETVAL(x) 0 diff --git a/arch/sparc/lib/U3copy_to_user.S b/arch/sparc/lib/U3copy_to_user.S index ef1e493afdfa..845139d75537 100644 --- a/arch/sparc/lib/U3copy_to_user.S +++ b/arch/sparc/lib/U3copy_to_user.S @@ -11,6 +11,14 @@ .text; \ .align 4; +#define EX_ST_FP(x) \ +98: x; \ + .section __ex_table,"a";\ + .align 4; \ + .word 98b, __retl_one_fp;\ + .text; \ + .align 4; + #define FUNC_NAME U3copy_to_user #define STORE(type,src,addr) type##a src, [addr] ASI_AIUS #define STORE_BLK(src,addr) stda src, [addr] ASI_BLK_AIUS diff --git a/arch/sparc/lib/U3memcpy.S b/arch/sparc/lib/U3memcpy.S index 7cae9cc6a204..491ee69e4995 100644 --- a/arch/sparc/lib/U3memcpy.S +++ b/arch/sparc/lib/U3memcpy.S @@ -24,10 +24,16 @@ #ifndef EX_LD #define EX_LD(x) x #endif +#ifndef EX_LD_FP +#define EX_LD_FP(x) x +#endif #ifndef EX_ST #define EX_ST(x) x #endif +#ifndef EX_ST_FP +#define EX_ST_FP(x) x +#endif #ifndef EX_RETVAL #define EX_RETVAL(x) x @@ -120,8 +126,8 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ and %g2, 0x38, %g2 1: subcc %g1, 0x1, %g1 - EX_LD(LOAD(ldub, %o1 + 0x00, %o3)) - EX_ST(STORE(stb, %o3, %o1 + GLOBAL_SPARE)) + EX_LD_FP(LOAD(ldub, %o1 + 0x00, %o3)) + EX_ST_FP(STORE(stb, %o3, %o1 + GLOBAL_SPARE)) bgu,pt %XCC, 1b add %o1, 0x1, %o1 @@ -132,20 +138,20 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ be,pt %icc, 3f alignaddr %o1, %g0, %o1 - EX_LD(LOAD(ldd, %o1, %f4)) -1: EX_LD(LOAD(ldd, %o1 + 0x8, %f6)) + EX_LD_FP(LOAD(ldd, %o1, %f4)) +1: EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f6)) add %o1, 0x8, %o1 subcc %g2, 0x8, %g2 faligndata %f4, %f6, %f0 - EX_ST(STORE(std, %f0, %o0)) + EX_ST_FP(STORE(std, %f0, %o0)) be,pn %icc, 3f add %o0, 0x8, %o0 - EX_LD(LOAD(ldd, %o1 + 0x8, %f4)) + EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f4)) add %o1, 0x8, %o1 subcc %g2, 0x8, %g2 faligndata %f6, %f4, %f2 - EX_ST(STORE(std, %f2, %o0)) + EX_ST_FP(STORE(std, %f2, %o0)) bne,pt %icc, 1b add %o0, 0x8, %o0 @@ -155,25 +161,25 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ LOAD(prefetch, %o1 + 0x080, #one_read) LOAD(prefetch, %o1 + 0x0c0, #one_read) LOAD(prefetch, %o1 + 0x100, #one_read) - EX_LD(LOAD(ldd, %o1 + 0x000, %f0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x000, %f0)) LOAD(prefetch, %o1 + 0x140, #one_read) - EX_LD(LOAD(ldd, %o1 + 0x008, %f2)) + EX_LD_FP(LOAD(ldd, %o1 + 0x008, %f2)) LOAD(prefetch, %o1 + 0x180, #one_read) - EX_LD(LOAD(ldd, %o1 + 0x010, %f4)) + EX_LD_FP(LOAD(ldd, %o1 + 0x010, %f4)) LOAD(prefetch, %o1 + 0x1c0, #one_read) faligndata %f0, %f2, %f16 - EX_LD(LOAD(ldd, %o1 + 0x018, %f6)) + EX_LD_FP(LOAD(ldd, %o1 + 0x018, %f6)) faligndata %f2, %f4, %f18 - EX_LD(LOAD(ldd, %o1 + 0x020, %f8)) + EX_LD_FP(LOAD(ldd, %o1 + 0x020, %f8)) faligndata %f4, %f6, %f20 - EX_LD(LOAD(ldd, %o1 + 0x028, %f10)) + EX_LD_FP(LOAD(ldd, %o1 + 0x028, %f10)) faligndata %f6, %f8, %f22 - EX_LD(LOAD(ldd, %o1 + 0x030, %f12)) + EX_LD_FP(LOAD(ldd, %o1 + 0x030, %f12)) faligndata %f8, %f10, %f24 - EX_LD(LOAD(ldd, %o1 + 0x038, %f14)) + EX_LD_FP(LOAD(ldd, %o1 + 0x038, %f14)) faligndata %f10, %f12, %f26 - EX_LD(LOAD(ldd, %o1 + 0x040, %f0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0)) subcc GLOBAL_SPARE, 0x80, GLOBAL_SPARE add %o1, 0x40, %o1 @@ -184,26 +190,26 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ .align 64 1: - EX_LD(LOAD(ldd, %o1 + 0x008, %f2)) + EX_LD_FP(LOAD(ldd, %o1 + 0x008, %f2)) faligndata %f12, %f14, %f28 - EX_LD(LOAD(ldd, %o1 + 0x010, %f4)) + EX_LD_FP(LOAD(ldd, %o1 + 0x010, %f4)) faligndata %f14, %f0, %f30 - EX_ST(STORE_BLK(%f16, %o0)) - EX_LD(LOAD(ldd, %o1 + 0x018, %f6)) + EX_ST_FP(STORE_BLK(%f16, %o0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x018, %f6)) faligndata %f0, %f2, %f16 add %o0, 0x40, %o0 - EX_LD(LOAD(ldd, %o1 + 0x020, %f8)) + EX_LD_FP(LOAD(ldd, %o1 + 0x020, %f8)) faligndata %f2, %f4, %f18 - EX_LD(LOAD(ldd, %o1 + 0x028, %f10)) + EX_LD_FP(LOAD(ldd, %o1 + 0x028, %f10)) faligndata %f4, %f6, %f20 - EX_LD(LOAD(ldd, %o1 + 0x030, %f12)) + EX_LD_FP(LOAD(ldd, %o1 + 0x030, %f12)) subcc %o3, 0x01, %o3 faligndata %f6, %f8, %f22 - EX_LD(LOAD(ldd, %o1 + 0x038, %f14)) + EX_LD_FP(LOAD(ldd, %o1 + 0x038, %f14)) faligndata %f8, %f10, %f24 - EX_LD(LOAD(ldd, %o1 + 0x040, %f0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0)) LOAD(prefetch, %o1 + 0x1c0, #one_read) faligndata %f10, %f12, %f26 bg,pt %XCC, 1b @@ -211,29 +217,29 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ /* Finally we copy the last full 64-byte block. */ 2: - EX_LD(LOAD(ldd, %o1 + 0x008, %f2)) + EX_LD_FP(LOAD(ldd, %o1 + 0x008, %f2)) faligndata %f12, %f14, %f28 - EX_LD(LOAD(ldd, %o1 + 0x010, %f4)) + EX_LD_FP(LOAD(ldd, %o1 + 0x010, %f4)) faligndata %f14, %f0, %f30 - EX_ST(STORE_BLK(%f16, %o0)) - EX_LD(LOAD(ldd, %o1 + 0x018, %f6)) + EX_ST_FP(STORE_BLK(%f16, %o0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x018, %f6)) faligndata %f0, %f2, %f16 - EX_LD(LOAD(ldd, %o1 + 0x020, %f8)) + EX_LD_FP(LOAD(ldd, %o1 + 0x020, %f8)) faligndata %f2, %f4, %f18 - EX_LD(LOAD(ldd, %o1 + 0x028, %f10)) + EX_LD_FP(LOAD(ldd, %o1 + 0x028, %f10)) faligndata %f4, %f6, %f20 - EX_LD(LOAD(ldd, %o1 + 0x030, %f12)) + EX_LD_FP(LOAD(ldd, %o1 + 0x030, %f12)) faligndata %f6, %f8, %f22 - EX_LD(LOAD(ldd, %o1 + 0x038, %f14)) + EX_LD_FP(LOAD(ldd, %o1 + 0x038, %f14)) faligndata %f8, %f10, %f24 cmp %g1, 0 be,pt %XCC, 1f add %o0, 0x40, %o0 - EX_LD(LOAD(ldd, %o1 + 0x040, %f0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0)) 1: faligndata %f10, %f12, %f26 faligndata %f12, %f14, %f28 faligndata %f14, %f0, %f30 - EX_ST(STORE_BLK(%f16, %o0)) + EX_ST_FP(STORE_BLK(%f16, %o0)) add %o0, 0x40, %o0 add %o1, 0x40, %o1 membar #Sync @@ -253,20 +259,20 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ sub %o2, %g2, %o2 be,a,pt %XCC, 1f - EX_LD(LOAD(ldd, %o1 + 0x00, %f0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x00, %f0)) -1: EX_LD(LOAD(ldd, %o1 + 0x08, %f2)) +1: EX_LD_FP(LOAD(ldd, %o1 + 0x08, %f2)) add %o1, 0x8, %o1 subcc %g2, 0x8, %g2 faligndata %f0, %f2, %f8 - EX_ST(STORE(std, %f8, %o0)) + EX_ST_FP(STORE(std, %f8, %o0)) be,pn %XCC, 2f add %o0, 0x8, %o0 - EX_LD(LOAD(ldd, %o1 + 0x08, %f0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x08, %f0)) add %o1, 0x8, %o1 subcc %g2, 0x8, %g2 faligndata %f2, %f0, %f8 - EX_ST(STORE(std, %f8, %o0)) + EX_ST_FP(STORE(std, %f8, %o0)) bne,pn %XCC, 1b add %o0, 0x8, %o0 -- cgit v1.2.3 From 930c0f708e156613c37b97cf583c4c6b07d99cce Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 25 Dec 2015 12:09:30 -0500 Subject: MIPS: Fix bitrot in __get_user_unaligned() Signed-off-by: Al Viro Signed-off-by: Ralf Baechle --- arch/mips/include/asm/uaccess.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h index 2e3b3991cf0b..095ecafe6bd3 100644 --- a/arch/mips/include/asm/uaccess.h +++ b/arch/mips/include/asm/uaccess.h @@ -599,7 +599,7 @@ extern void __put_user_unknown(void); * On error, the variable @x is set to zero. */ #define __get_user_unaligned(x,ptr) \ - __get_user__unalignednocheck((x),(ptr),sizeof(*(ptr))) + __get_user_unaligned_nocheck((x),(ptr),sizeof(*(ptr))) /* * Yuck. We need two variants, one for 64bit operation and one @@ -620,8 +620,8 @@ extern void __get_user_unaligned_unknown(void); do { \ switch (size) { \ case 1: __get_data_asm(val, "lb", ptr); break; \ - case 2: __get_user_unaligned_asm(val, "ulh", ptr); break; \ - case 4: __get_user_unaligned_asm(val, "ulw", ptr); break; \ + case 2: __get_data_unaligned_asm(val, "ulh", ptr); break; \ + case 4: __get_data_unaligned_asm(val, "ulw", ptr); break; \ case 8: __GET_USER_UNALIGNED_DW(val, ptr); break; \ default: __get_user_unaligned_unknown(); break; \ } \ -- cgit v1.2.3 From 76cc404bfdc0d419c720de4daaf2584542734f42 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 28 Dec 2015 20:47:08 -0500 Subject: [PATCH] arm: fix handling of F_OFD_... in oabi_fcntl64() Cc: stable@vger.kernel.org # 3.15+ Reviewed-by: Jeff Layton Signed-off-by: Al Viro --- arch/arm/kernel/sys_oabi-compat.c | 73 ++++++++++++++++++++------------------- 1 file changed, 37 insertions(+), 36 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index b83f3b7737fb..087acb569b63 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -193,15 +193,44 @@ struct oabi_flock64 { pid_t l_pid; } __attribute__ ((packed,aligned(4))); -asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd, +static long do_locks(unsigned int fd, unsigned int cmd, unsigned long arg) { - struct oabi_flock64 user; struct flock64 kernel; - mm_segment_t fs = USER_DS; /* initialized to kill a warning */ - unsigned long local_arg = arg; - int ret; + struct oabi_flock64 user; + mm_segment_t fs; + long ret; + + if (copy_from_user(&user, (struct oabi_flock64 __user *)arg, + sizeof(user))) + return -EFAULT; + kernel.l_type = user.l_type; + kernel.l_whence = user.l_whence; + kernel.l_start = user.l_start; + kernel.l_len = user.l_len; + kernel.l_pid = user.l_pid; + + fs = get_fs(); + set_fs(KERNEL_DS); + ret = sys_fcntl64(fd, cmd, (unsigned long)&kernel); + set_fs(fs); + + if (!ret && (cmd == F_GETLK64 || cmd == F_OFD_GETLK)) { + user.l_type = kernel.l_type; + user.l_whence = kernel.l_whence; + user.l_start = kernel.l_start; + user.l_len = kernel.l_len; + user.l_pid = kernel.l_pid; + if (copy_to_user((struct oabi_flock64 __user *)arg, + &user, sizeof(user))) + ret = -EFAULT; + } + return ret; +} +asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd, + unsigned long arg) +{ switch (cmd) { case F_OFD_GETLK: case F_OFD_SETLK: @@ -209,39 +238,11 @@ asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd, case F_GETLK64: case F_SETLK64: case F_SETLKW64: - if (copy_from_user(&user, (struct oabi_flock64 __user *)arg, - sizeof(user))) - return -EFAULT; - kernel.l_type = user.l_type; - kernel.l_whence = user.l_whence; - kernel.l_start = user.l_start; - kernel.l_len = user.l_len; - kernel.l_pid = user.l_pid; - local_arg = (unsigned long)&kernel; - fs = get_fs(); - set_fs(KERNEL_DS); - } - - ret = sys_fcntl64(fd, cmd, local_arg); + return do_locks(fd, cmd, arg); - switch (cmd) { - case F_GETLK64: - if (!ret) { - user.l_type = kernel.l_type; - user.l_whence = kernel.l_whence; - user.l_start = kernel.l_start; - user.l_len = kernel.l_len; - user.l_pid = kernel.l_pid; - if (copy_to_user((struct oabi_flock64 __user *)arg, - &user, sizeof(user))) - ret = -EFAULT; - } - case F_SETLK64: - case F_SETLKW64: - set_fs(fs); + default: + return sys_fcntl64(fd, cmd, arg); } - - return ret; } struct oabi_epoll_event { -- cgit v1.2.3 From 398c7500a1f5f74e207bd2edca1b1721b3cc1f1e Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 23 Dec 2015 21:04:31 -0800 Subject: MIPS: VDSO: Fix build error with binutils 2.24 and earlier Commit 2a037f310bab ("MIPS: VDSO: Fix build error") tries to fix a build error seen with binutils 2.24 and earlier. However, the fix does not work, and again results in the already known build errors if the kernel is built with an earlier version of binutils. CC arch/mips/vdso/gettimeofday.o /tmp/ccnOVbHT.s: Assembler messages: /tmp/ccnOVbHT.s:50: Error: can't resolve `_start' {*UND* section} - `L0 {.text section} /tmp/ccnOVbHT.s:374: Error: can't resolve `_start' {*UND* section} - `L0 {.text section} scripts/Makefile.build:258: recipe for target 'arch/mips/vdso/gettimeofday.o' failed make[2]: *** [arch/mips/vdso/gettimeofday.o] Error 1 Fixes: 2a037f310bab ("MIPS: VDSO: Fix build error") Cc: Qais Yousef Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11926/ Signed-off-by: Guenter Roeck Signed-off-by: Ralf Baechle --- arch/mips/vdso/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile index 018f8c7b94f2..14568900fc1d 100644 --- a/arch/mips/vdso/Makefile +++ b/arch/mips/vdso/Makefile @@ -26,7 +26,7 @@ aflags-vdso := $(ccflags-vdso) \ # the comments on that file. # ifndef CONFIG_CPU_MIPSR6 - ifeq ($(call ld-ifversion, -lt, 22500000, y),) + ifeq ($(call ld-ifversion, -lt, 22500000, y),y) $(warning MIPS VDSO requires binutils >= 2.25) obj-vdso-y := $(filter-out gettimeofday.o, $(obj-vdso-y)) ccflags-vdso += -DDISABLE_MIPS_VDSO -- cgit v1.2.3 From facca61683f937f31f90307cc64851436c8a3e21 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 29 Dec 2015 14:54:13 -0800 Subject: arch/x86/xen/suspend.c: include xen/xen.h Fix the build warning: arch/x86/xen/suspend.c: In function 'xen_arch_pre_suspend': arch/x86/xen/suspend.c:70:9: error: implicit declaration of function 'xen_pv_domain' [-Werror=implicit-function-declaration] if (xen_pv_domain()) ^ Reported-by: kbuild test robot Cc: Sasha Levin Cc: Konrad Rzeszutek Wilk Cc: Boris Ostrovsky Cc: David Vrabel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/xen/suspend.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index 3705eabd7e22..df0c40559583 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -1,6 +1,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3 From 6122192eb6f2a3311bbf4600c5537fbe1c223022 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Tue, 29 Dec 2015 14:54:16 -0800 Subject: m32r: fix build failure m32r allmodconfig is failing with: In file included from ../include/linux/kvm_para.h:4:0, from ../kernel/watchdog.c:26: ../include/uapi/linux/kvm_para.h:30:26: fatal error: asm/kvm_para.h: No such file or directory kvm_para.h was not included in the build. Signed-off-by: Sudip Mukherjee Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m32r/include/asm/Kbuild | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/m32r/include/asm/Kbuild b/arch/m32r/include/asm/Kbuild index fd104bd221ce..860e440611c9 100644 --- a/arch/m32r/include/asm/Kbuild +++ b/arch/m32r/include/asm/Kbuild @@ -3,6 +3,7 @@ generic-y += clkdev.h generic-y += cputime.h generic-y += exec.h generic-y += irq_work.h +generic-y += kvm_para.h generic-y += mcs_spinlock.h generic-y += mm-arch-hooks.h generic-y += module.h -- cgit v1.2.3 From 92a8ed4c7643809123ef0a65424569eaacc5c6b0 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Tue, 29 Dec 2015 14:54:19 -0800 Subject: m32r: add io*_rep helpers m32r allmodconfig was failing with the error: error: implicit declaration of function 'read' On checking io.h it turned out that 'read' is not defined but 'readb' is defined and 'ioread8' will then obviously mean 'readb'. At the same time some of the helper functions ioreadN_rep() and iowriteN_rep() were missing which also led to the build failure. Signed-off-by: Sudip Mukherjee Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m32r/include/asm/io.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/m32r/include/asm/io.h b/arch/m32r/include/asm/io.h index 61b8931bc192..4b0f5e001d4d 100644 --- a/arch/m32r/include/asm/io.h +++ b/arch/m32r/include/asm/io.h @@ -168,13 +168,21 @@ static inline void _writel(unsigned long l, unsigned long addr) #define writew_relaxed writew #define writel_relaxed writel -#define ioread8 read +#define ioread8 readb #define ioread16 readw #define ioread32 readl #define iowrite8 writeb #define iowrite16 writew #define iowrite32 writel +#define ioread8_rep(p, dst, count) insb((unsigned long)(p), (dst), (count)) +#define ioread16_rep(p, dst, count) insw((unsigned long)(p), (dst), (count)) +#define ioread32_rep(p, dst, count) insl((unsigned long)(p), (dst), (count)) + +#define iowrite8_rep(p, src, count) outsb((unsigned long)(p), (src), (count)) +#define iowrite16_rep(p, src, count) outsw((unsigned long)(p), (src), (count)) +#define iowrite32_rep(p, src, count) outsl((unsigned long)(p), (src), (count)) + #define ioread16be(addr) be16_to_cpu(readw(addr)) #define ioread32be(addr) be32_to_cpu(readl(addr)) #define iowrite16be(v, addr) writew(cpu_to_be16(v), (addr)) -- cgit v1.2.3 From dd7a5ab495019d424c2b0747892eb2e38a052ba5 Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Thu, 31 Dec 2015 02:06:47 +0800 Subject: x86/numachip: Fix NumaConnect2 MMCFG PCI access The MMCFG PCI accessors weren't being setup for NumacConnect2 correctly due to over-early assignment; this would create the potential for the wrong PCI domain to be accessed. Fix this by using the correct arch-specific PCI init function. Signed-off-by: Daniel J Blueman Acked-by: Steffen Persvold Cc: Daniel Lezcano Cc: Linus Torvalds Link: http://lkml.kernel.org/r/1451498807-15920-1-git-send-email-daniel@numascale.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apic/apic_numachip.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic_numachip.c b/arch/x86/kernel/apic/apic_numachip.c index 38dd5efdd04c..2bd2292a316d 100644 --- a/arch/x86/kernel/apic/apic_numachip.c +++ b/arch/x86/kernel/apic/apic_numachip.c @@ -193,20 +193,17 @@ static int __init numachip_system_init(void) case 1: init_extra_mapping_uc(NUMACHIP_LCSR_BASE, NUMACHIP_LCSR_SIZE); numachip_apic_icr_write = numachip1_apic_icr_write; - x86_init.pci.arch_init = pci_numachip_init; break; case 2: init_extra_mapping_uc(NUMACHIP2_LCSR_BASE, NUMACHIP2_LCSR_SIZE); numachip_apic_icr_write = numachip2_apic_icr_write; - - /* Use MCFG config cycles rather than locked CF8 cycles */ - raw_pci_ops = &pci_mmcfg; break; default: return 0; } x86_cpuinit.fixup_cpu_id = fixup_cpu_id; + x86_init.pci.arch_init = pci_numachip_init; return 0; } -- cgit v1.2.3 From 694341cf2027504b6f63aaf4405b3af9ff41c63e Mon Sep 17 00:00:00 2001 From: Timo Sigurdsson Date: Tue, 29 Dec 2015 02:47:33 +0100 Subject: ARM: Fix broken USB support in sunxi_defconfig Commit 69fb4dcada77 ("power: Add an axp20x-usb-power driver") introduced a new driver for the USB power supply used on various Allwinner based SBCs. However, the driver was not added to sunxi_defconfig which breaks USB support for some boards (e.g. LeMaker BananaPi) as the kernel will now turn off the USB power supply during boot by default if the driver isn't present. (This was not the case in linux 4.3 or lower where the USB power was always left on.) Hence, add the driver to sunxi_defconfig in order to keep USB support working on those boards that require it. Signed-off-by: Timo Sigurdsson Reported-by: David Tulloh Tested-by: David Tulloh Tested-by: Timo Sigurdsson Signed-off-by: Arnd Bergmann Acked-by: Maxime Ripard --- arch/arm/configs/sunxi_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 3c36e16fcacf..b503a89441bf 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -84,6 +84,7 @@ CONFIG_SPI_SUN4I=y CONFIG_SPI_SUN6I=y CONFIG_GPIO_SYSFS=y CONFIG_POWER_SUPPLY=y +CONFIG_AXP20X_POWER=y CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y CONFIG_WATCHDOG=y -- cgit v1.2.3 From 8b30ca73b7cc7f2177cfc4e8274d2ebdba328cd5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 31 Dec 2015 15:18:02 -0500 Subject: sparc: Add all necessary direct socket system calls. The GLIBC folks would like to eliminate socketcall support eventually, and this makes sense regardless so wire them all up. Signed-off-by: David S. Miller --- arch/sparc/include/uapi/asm/unistd.h | 5 ++++- arch/sparc/kernel/systbls_32.S | 19 ++++++++++--------- arch/sparc/kernel/systbls_64.S | 18 ++++++++++-------- 3 files changed, 24 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/sparc/include/uapi/asm/unistd.h b/arch/sparc/include/uapi/asm/unistd.h index f31a124a8497..5655912fbca7 100644 --- a/arch/sparc/include/uapi/asm/unistd.h +++ b/arch/sparc/include/uapi/asm/unistd.h @@ -418,8 +418,11 @@ #define __NR_execveat 350 #define __NR_membarrier 351 #define __NR_userfaultfd 352 +#define __NR_bind 353 +#define __NR_listen 354 +#define __NR_setsockopt 355 -#define NR_syscalls 353 +#define NR_syscalls 356 /* Bitmask values returned from kern_features system call. */ #define KERN_FEATURE_MIXED_MODE_STACK 0x00000001 diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index 78e80293cb6d..d557a256517c 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -35,18 +35,18 @@ sys_call_table: /*80*/ .long sys_setgroups16, sys_getpgrp, sys_setgroups, sys_setitimer, sys_ftruncate64 /*85*/ .long sys_swapon, sys_getitimer, sys_setuid, sys_sethostname, sys_setgid /*90*/ .long sys_dup2, sys_setfsuid, sys_fcntl, sys_select, sys_setfsgid -/*95*/ .long sys_fsync, sys_setpriority, sys_nis_syscall, sys_nis_syscall, sys_nis_syscall +/*95*/ .long sys_fsync, sys_setpriority, sys_socket, sys_connect, sys_accept /*100*/ .long sys_getpriority, sys_rt_sigreturn, sys_rt_sigaction, sys_rt_sigprocmask, sys_rt_sigpending /*105*/ .long sys_rt_sigtimedwait, sys_rt_sigqueueinfo, sys_rt_sigsuspend, sys_setresuid, sys_getresuid -/*110*/ .long sys_setresgid, sys_getresgid, sys_setregid, sys_nis_syscall, sys_nis_syscall -/*115*/ .long sys_getgroups, sys_gettimeofday, sys_getrusage, sys_nis_syscall, sys_getcwd +/*110*/ .long sys_setresgid, sys_getresgid, sys_setregid, sys_recvmsg, sys_sendmsg +/*115*/ .long sys_getgroups, sys_gettimeofday, sys_getrusage, sys_getsockopt, sys_getcwd /*120*/ .long sys_readv, sys_writev, sys_settimeofday, sys_fchown16, sys_fchmod -/*125*/ .long sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys_truncate -/*130*/ .long sys_ftruncate, sys_flock, sys_lstat64, sys_nis_syscall, sys_nis_syscall -/*135*/ .long sys_nis_syscall, sys_mkdir, sys_rmdir, sys_utimes, sys_stat64 -/*140*/ .long sys_sendfile64, sys_nis_syscall, sys_futex, sys_gettid, sys_getrlimit +/*125*/ .long sys_recvfrom, sys_setreuid16, sys_setregid16, sys_rename, sys_truncate +/*130*/ .long sys_ftruncate, sys_flock, sys_lstat64, sys_sendto, sys_shutdown +/*135*/ .long sys_socketpair, sys_mkdir, sys_rmdir, sys_utimes, sys_stat64 +/*140*/ .long sys_sendfile64, sys_getpeername, sys_futex, sys_gettid, sys_getrlimit /*145*/ .long sys_setrlimit, sys_pivot_root, sys_prctl, sys_pciconfig_read, sys_pciconfig_write -/*150*/ .long sys_nis_syscall, sys_inotify_init, sys_inotify_add_watch, sys_poll, sys_getdents64 +/*150*/ .long sys_getsockname, sys_inotify_init, sys_inotify_add_watch, sys_poll, sys_getdents64 /*155*/ .long sys_fcntl64, sys_inotify_rm_watch, sys_statfs, sys_fstatfs, sys_oldumount /*160*/ .long sys_sched_setaffinity, sys_sched_getaffinity, sys_getdomainname, sys_setdomainname, sys_nis_syscall /*165*/ .long sys_quotactl, sys_set_tid_address, sys_mount, sys_ustat, sys_setxattr @@ -87,4 +87,5 @@ sys_call_table: /*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev /*340*/ .long sys_ni_syscall, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr /*345*/ .long sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf -/*350*/ .long sys_execveat, sys_membarrier, sys_userfaultfd +/*350*/ .long sys_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen +/*355*/ .long sys_setsockopt diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index 2549c2c3ec2f..898684c97031 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -37,15 +37,15 @@ sys_call_table32: /*80*/ .word sys_setgroups16, sys_getpgrp, sys_setgroups, compat_sys_setitimer, sys32_ftruncate64 .word sys_swapon, compat_sys_getitimer, sys_setuid, sys_sethostname, sys_setgid /*90*/ .word sys_dup2, sys_setfsuid, compat_sys_fcntl, sys32_select, sys_setfsgid - .word sys_fsync, sys_setpriority, sys_nis_syscall, sys_nis_syscall, sys_nis_syscall + .word sys_fsync, sys_setpriority, sys_socket, sys_connect, sys_accept /*100*/ .word sys_getpriority, sys32_rt_sigreturn, compat_sys_rt_sigaction, compat_sys_rt_sigprocmask, compat_sys_rt_sigpending .word compat_sys_rt_sigtimedwait, compat_sys_rt_sigqueueinfo, compat_sys_rt_sigsuspend, sys_setresuid, sys_getresuid -/*110*/ .word sys_setresgid, sys_getresgid, sys_setregid, sys_nis_syscall, sys_nis_syscall - .word sys_getgroups, compat_sys_gettimeofday, compat_sys_getrusage, sys_nis_syscall, sys_getcwd +/*110*/ .word sys_setresgid, sys_getresgid, sys_setregid, compat_sys_recvmsg, compat_sys_sendmsg + .word sys_getgroups, compat_sys_gettimeofday, compat_sys_getrusage, compat_sys_getsockopt, sys_getcwd /*120*/ .word compat_sys_readv, compat_sys_writev, compat_sys_settimeofday, sys_fchown16, sys_fchmod - .word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, compat_sys_truncate -/*130*/ .word compat_sys_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall - .word sys_nis_syscall, sys_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64 + .word sys_recvfrom, sys_setreuid16, sys_setregid16, sys_rename, compat_sys_truncate +/*130*/ .word compat_sys_ftruncate, sys_flock, compat_sys_lstat64, sys_sendto, sys_shutdown + .word sys_socketpair, sys_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64 /*140*/ .word sys_sendfile64, sys_nis_syscall, sys32_futex, sys_gettid, compat_sys_getrlimit .word compat_sys_setrlimit, sys_pivot_root, sys_prctl, sys_pciconfig_read, sys_pciconfig_write /*150*/ .word sys_nis_syscall, sys_inotify_init, sys_inotify_add_watch, sys_poll, sys_getdents64 @@ -88,7 +88,8 @@ sys_call_table32: .word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev /*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr .word sys32_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf -/*350*/ .word sys32_execveat, sys_membarrier, sys_userfaultfd +/*350*/ .word sys32_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen + .word compat_sys_setsockopt #endif /* CONFIG_COMPAT */ @@ -168,4 +169,5 @@ sys_call_table: .word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev /*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr .word sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf -/*350*/ .word sys64_execveat, sys_membarrier, sys_userfaultfd +/*350*/ .word sys64_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen + .word sys_setsockopt -- cgit v1.2.3 From 42d85c52f88dd0d2159f531eb33cc66d6e3e60c0 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 31 Dec 2015 15:38:56 -0500 Subject: sparc: Wire up mlock2 system call. Signed-off-by: David S. Miller --- arch/sparc/include/uapi/asm/unistd.h | 3 ++- arch/sparc/kernel/systbls_32.S | 2 +- arch/sparc/kernel/systbls_64.S | 4 ++-- 3 files changed, 5 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sparc/include/uapi/asm/unistd.h b/arch/sparc/include/uapi/asm/unistd.h index 5655912fbca7..1c26d440d288 100644 --- a/arch/sparc/include/uapi/asm/unistd.h +++ b/arch/sparc/include/uapi/asm/unistd.h @@ -421,8 +421,9 @@ #define __NR_bind 353 #define __NR_listen 354 #define __NR_setsockopt 355 +#define __NR_mlock2 356 -#define NR_syscalls 356 +#define NR_syscalls 357 /* Bitmask values returned from kern_features system call. */ #define KERN_FEATURE_MIXED_MODE_STACK 0x00000001 diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index d557a256517c..e663b6c78de2 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -88,4 +88,4 @@ sys_call_table: /*340*/ .long sys_ni_syscall, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr /*345*/ .long sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf /*350*/ .long sys_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen -/*355*/ .long sys_setsockopt +/*355*/ .long sys_setsockopt, sys_mlock2 diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index 898684c97031..1557121f4cdc 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -89,7 +89,7 @@ sys_call_table32: /*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr .word sys32_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf /*350*/ .word sys32_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen - .word compat_sys_setsockopt + .word compat_sys_setsockopt, sys_mlock2 #endif /* CONFIG_COMPAT */ @@ -170,4 +170,4 @@ sys_call_table: /*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr .word sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf /*350*/ .word sys64_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen - .word sys_setsockopt + .word sys_setsockopt, sys_mlock2 -- cgit v1.2.3 From c1b27ab5d69099718f519127eea017120c180e71 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Tue, 22 Dec 2015 12:28:51 -0500 Subject: tile: provide CONFIG_PAGE_SIZE_64KB etc for tilepro This allows the build system to know that it can't attempt to configure the Lustre virtual block device, for example, when tilepro is using 64KB pages (as it does by default). The tilegx build already provided those symbols. Previously we required that the tilepro hypervisor be rebuilt with a different hardcoded page size in its headers, and then Linux be rebuilt using the updated hypervisor header. Now we allow each of the hypervisor and Linux to be built independently. We still check at boot time to ensure that the page size provided by the hypervisor matches what Linux expects. Signed-off-by: Chris Metcalf Cc: stable@vger.kernel.org [3.19+] --- arch/tile/Kconfig | 11 +++++------ arch/tile/include/asm/page.h | 8 +++++--- 2 files changed, 10 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 106c21bd7f44..8ec7a4599c08 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -176,8 +176,6 @@ config NR_CPUS smaller kernel memory footprint results from using a smaller value on chips with fewer tiles. -if TILEGX - choice prompt "Kernel page size" default PAGE_SIZE_64KB @@ -188,8 +186,11 @@ choice connections, etc., it may be better to select 16KB, which uses memory more efficiently at some cost in TLB performance. - Note that this option is TILE-Gx specific; currently - TILEPro page size is set by rebuilding the hypervisor. + Note that for TILEPro, you must also rebuild the hypervisor + with a matching page size. + +config PAGE_SIZE_4KB + bool "4KB" if TILEPRO config PAGE_SIZE_16KB bool "16KB" @@ -199,8 +200,6 @@ config PAGE_SIZE_64KB endchoice -endif - source "kernel/Kconfig.hz" config KEXEC diff --git a/arch/tile/include/asm/page.h b/arch/tile/include/asm/page.h index a213a8d84a95..8eca6a0e1762 100644 --- a/arch/tile/include/asm/page.h +++ b/arch/tile/include/asm/page.h @@ -20,15 +20,17 @@ #include /* PAGE_SHIFT and HPAGE_SHIFT determine the page sizes. */ -#if defined(CONFIG_PAGE_SIZE_16KB) +#if defined(CONFIG_PAGE_SIZE_4KB) /* tilepro only */ +#define PAGE_SHIFT 12 +#define CTX_PAGE_FLAG HV_CTX_PG_SM_4K +#elif defined(CONFIG_PAGE_SIZE_16KB) #define PAGE_SHIFT 14 #define CTX_PAGE_FLAG HV_CTX_PG_SM_16K #elif defined(CONFIG_PAGE_SIZE_64KB) #define PAGE_SHIFT 16 #define CTX_PAGE_FLAG HV_CTX_PG_SM_64K #else -#define PAGE_SHIFT HV_LOG2_DEFAULT_PAGE_SIZE_SMALL -#define CTX_PAGE_FLAG 0 +#error Page size not specified in Kconfig #endif #define HPAGE_SHIFT HV_LOG2_DEFAULT_PAGE_SIZE_LARGE -- cgit v1.2.3 From 55795ef5469290f89f04e12e662ded604909e462 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 5 Jan 2016 16:23:07 +0100 Subject: net: filter: make JITs zero A for SKF_AD_ALU_XOR_X The SKF_AD_ALU_XOR_X ancillary is not like the other ancillary data instructions since it XORs A with X while all the others replace A with some loaded value. All the BPF JITs fail to clear A if this is used as the first instruction in a filter. This was found using american fuzzy lop. Add a helper to determine if A needs to be cleared given the first instruction in a filter, and use this in the JITs. Except for ARM, the rest have only been compile-tested. Fixes: 3480593131e0 ("net: filter: get rid of BPF_S_* enum") Signed-off-by: Rabin Vincent Acked-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- arch/arm/net/bpf_jit_32.c | 16 +--------------- arch/mips/net/bpf_jit.c | 16 +--------------- arch/powerpc/net/bpf_jit_comp.c | 13 ++----------- arch/sparc/net/bpf_jit_comp.c | 17 ++--------------- 4 files changed, 6 insertions(+), 56 deletions(-) (limited to 'arch') diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 591f9db3bf40..e153eb065fe4 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -187,19 +187,6 @@ static inline int mem_words_used(struct jit_ctx *ctx) return fls(ctx->seen & SEEN_MEM); } -static inline bool is_load_to_a(u16 inst) -{ - switch (inst) { - case BPF_LD | BPF_W | BPF_LEN: - case BPF_LD | BPF_W | BPF_ABS: - case BPF_LD | BPF_H | BPF_ABS: - case BPF_LD | BPF_B | BPF_ABS: - return true; - default: - return false; - } -} - static void jit_fill_hole(void *area, unsigned int size) { u32 *ptr; @@ -211,7 +198,6 @@ static void jit_fill_hole(void *area, unsigned int size) static void build_prologue(struct jit_ctx *ctx) { u16 reg_set = saved_regs(ctx); - u16 first_inst = ctx->skf->insns[0].code; u16 off; #ifdef CONFIG_FRAME_POINTER @@ -241,7 +227,7 @@ static void build_prologue(struct jit_ctx *ctx) emit(ARM_MOV_I(r_X, 0), ctx); /* do not leak kernel data to userspace */ - if ((first_inst != (BPF_RET | BPF_K)) && !(is_load_to_a(first_inst))) + if (bpf_needs_clear_a(&ctx->skf->insns[0])) emit(ARM_MOV_I(r_A, 0), ctx); /* stack space for the BPF_MEM words */ diff --git a/arch/mips/net/bpf_jit.c b/arch/mips/net/bpf_jit.c index 77cb27309db2..1a8c96035716 100644 --- a/arch/mips/net/bpf_jit.c +++ b/arch/mips/net/bpf_jit.c @@ -521,19 +521,6 @@ static inline u16 align_sp(unsigned int num) return num; } -static bool is_load_to_a(u16 inst) -{ - switch (inst) { - case BPF_LD | BPF_W | BPF_LEN: - case BPF_LD | BPF_W | BPF_ABS: - case BPF_LD | BPF_H | BPF_ABS: - case BPF_LD | BPF_B | BPF_ABS: - return true; - default: - return false; - } -} - static void save_bpf_jit_regs(struct jit_ctx *ctx, unsigned offset) { int i = 0, real_off = 0; @@ -614,7 +601,6 @@ static unsigned int get_stack_depth(struct jit_ctx *ctx) static void build_prologue(struct jit_ctx *ctx) { - u16 first_inst = ctx->skf->insns[0].code; int sp_off; /* Calculate the total offset for the stack pointer */ @@ -641,7 +627,7 @@ static void build_prologue(struct jit_ctx *ctx) emit_jit_reg_move(r_X, r_zero, ctx); /* Do not leak kernel data to userspace */ - if ((first_inst != (BPF_RET | BPF_K)) && !(is_load_to_a(first_inst))) + if (bpf_needs_clear_a(&ctx->skf->insns[0])) emit_jit_reg_move(r_A, r_zero, ctx); } diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c index 04782164ee67..2d66a8446198 100644 --- a/arch/powerpc/net/bpf_jit_comp.c +++ b/arch/powerpc/net/bpf_jit_comp.c @@ -78,18 +78,9 @@ static void bpf_jit_build_prologue(struct bpf_prog *fp, u32 *image, PPC_LI(r_X, 0); } - switch (filter[0].code) { - case BPF_RET | BPF_K: - case BPF_LD | BPF_W | BPF_LEN: - case BPF_LD | BPF_W | BPF_ABS: - case BPF_LD | BPF_H | BPF_ABS: - case BPF_LD | BPF_B | BPF_ABS: - /* first instruction sets A register (or is RET 'constant') */ - break; - default: - /* make sure we dont leak kernel information to user */ + /* make sure we dont leak kernel information to user */ + if (bpf_needs_clear_a(&filter[0])) PPC_LI(r_A, 0); - } } static void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx) diff --git a/arch/sparc/net/bpf_jit_comp.c b/arch/sparc/net/bpf_jit_comp.c index 22564f5f2364..3e6e05a7c4c2 100644 --- a/arch/sparc/net/bpf_jit_comp.c +++ b/arch/sparc/net/bpf_jit_comp.c @@ -420,22 +420,9 @@ void bpf_jit_compile(struct bpf_prog *fp) } emit_reg_move(O7, r_saved_O7); - switch (filter[0].code) { - case BPF_RET | BPF_K: - case BPF_LD | BPF_W | BPF_LEN: - case BPF_LD | BPF_W | BPF_ABS: - case BPF_LD | BPF_H | BPF_ABS: - case BPF_LD | BPF_B | BPF_ABS: - /* The first instruction sets the A register (or is - * a "RET 'constant'") - */ - break; - default: - /* Make sure we dont leak kernel information to the - * user. - */ + /* Make sure we dont leak kernel information to the user. */ + if (bpf_needs_clear_a(&filter[0])) emit_clear(r_A); /* A = 0 */ - } for (i = 0; i < flen; i++) { unsigned int K = filter[i].k; -- cgit v1.2.3 From f941461c925832fbeb7876b794ab9fbec6a7a8af Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 5 Jan 2016 18:34:04 +0100 Subject: ARM: net: bpf: fix zero right shift The LSR instruction cannot be used to perform a zero right shift since a 0 as the immediate value (imm5) in the LSR instruction encoding means that a shift of 32 is perfomed. See DecodeIMMShift() in the ARM ARM. Make the JIT skip generation of the LSR if a zero-shift is requested. This was found using american fuzzy lop. Signed-off-by: Rabin Vincent Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- arch/arm/net/bpf_jit_32.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index e153eb065fe4..93d0b6d0b63e 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -756,7 +756,8 @@ load_ind: case BPF_ALU | BPF_RSH | BPF_K: if (unlikely(k > 31)) return -1; - emit(ARM_LSR_I(r_A, r_A, k), ctx); + if (k) + emit(ARM_LSR_I(r_A, r_A, k), ctx); break; case BPF_ALU | BPF_RSH | BPF_X: update_on_xread(ctx); -- cgit v1.2.3 From e7b11dc7b77bfce0a351230a5feeadc1d0bba997 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 5 Jan 2016 12:04:20 -0800 Subject: ARM: OMAP2+: Fix onenand rate detection to avoid filesystem corruption Commit 63aa945b1013 ("memory: omap-gpmc: Add Kconfig option for debug") unified the GPMC debug for the SoCs with GPMC. The commit also left out the option for HWMOD_INIT_NO_RESET as we now require proper timings for GPMC to be able to remap GPMC devices out of address 0. Unfortunately on Nokia N900, onenand now only partially works with the device tree provided timings. It works enough to get detected but the clock rate supported by the onenand chip gets misdetected. This in turn causes the GPMC timings to be miscalculated and this leads into file system corruption on N900. Looks like onenand needs CS_CONFIG1 bit 27 WRITETYPE set for for sync write. This is needed also for async timings when we write to onenand with omap2_onenand_set_async_mode(). Without sync write bit set, the async read for the onenand ONENAND_REG_VERSION_ID will return 0xfff. Let's exit with an error if onenand rate is not detected. And let's remove the extra call to omap2_onenand_set_async_mode() as we only need to do this once at the end of omap2_onenand_setup_async(). Fixes: 63aa945b1013 ("memory: omap-gpmc: Add Kconfig option for debug") Cc: stable@vger.kernel.org # v4.2+ Reported-by: Ivaylo Dimitrov Tested-by: Ivaylo Dimitrov Tested-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc-onenand.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 17a6f752a436..7b76ce01c21d 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -149,8 +149,8 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, freq = 104; break; default: - freq = 54; - break; + pr_err("onenand rate not detected, bad GPMC async timings?\n"); + freq = 0; } return freq; @@ -271,6 +271,11 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base) struct gpmc_timings t; int ret; + /* + * Note that we need to keep sync_write set for the call to + * omap2_onenand_set_async_mode() to work to detect the onenand + * supported clock rate for the sync timings. + */ if (gpmc_onenand_data->of_node) { gpmc_read_settings_dt(gpmc_onenand_data->of_node, &onenand_async); @@ -281,12 +286,9 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base) else gpmc_onenand_data->flags |= ONENAND_SYNC_READ; onenand_async.sync_read = false; - onenand_async.sync_write = false; } } - omap2_onenand_set_async_mode(onenand_base); - omap2_onenand_calc_async_timings(&t); ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async); @@ -310,6 +312,8 @@ static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr) if (!freq) { /* Very first call freq is not known */ freq = omap2_onenand_get_freq(gpmc_onenand_data, onenand_base); + if (!freq) + return -ENODEV; set_onenand_cfg(onenand_base); } -- cgit v1.2.3 From a461a3ecfc7eec8bd9c12475198fbd0b27377ded Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 4 Jan 2016 02:18:28 +0100 Subject: ARM: nomadik: set latencies to 8 cycles The Nomadik has sporadic crashes because of these latencies, setting them to max makes the platform work nicely, so use this values for now. These latencies were set to 2 since the Nomadik platform was merged, but I suspect they never took effect until the right size and associativity for the cache was specified in the device tree and that is why the crash comes now. Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson --- arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 314f59c12162..d0c743853318 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -25,9 +25,9 @@ cache-sets = <512>; cache-line-size = <32>; /* At full speed latency must be >=2 */ - arm,tag-latency = <2>; - arm,data-latency = <2 2>; - arm,dirty-latency = <2>; + arm,tag-latency = <8>; + arm,data-latency = <8 8>; + arm,dirty-latency = <8>; }; mtu0: mtu@101e2000 { -- cgit v1.2.3 From 20f12758c9a837e9cafd7ced59f0b4c7a3961281 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 5 Jan 2016 09:59:30 +0100 Subject: ARM: versatile: fix MMC/SD interrupt assignment Commit 0976c946a610d06e907335b7a3afa6db046f8e1b "arm/versatile: Fix versatile irq specifications" has an off-by-one error on the Versatile AB that has been regressing the Versatile AB hardware for some time. However it seems like the interrupt assignments have never been correct and I have now adjusted them according to the specification. The masks for the valid interrupts made it impossible to assign the right SIC interrupt for the MMCI, so I went in and fixed these to correspond to the specifications, and added references if anyone wants to double-check. Due to the Versatile PB including the Versatile AB as a base DTS file, we need to override and correct some values to correspond to the actual changes in the hardware. For the Versatile PB I don't think the IRQ line assignment for MMCI has ever been correct for either of the two MMCI blocks. It would be nice if someone with the physical PB board could test this. Patch tested on the Versatile AB, QEMU for Versatile AB and QEMU for Versatile PB. Cc: Rob Herring Cc: Grant Likely Cc: stable@vger.kernel.org Fixes: 0976c946a610 ("arm/versatile: Fix versatile irq specifications") Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson --- arch/arm/boot/dts/versatile-ab.dts | 10 +++++++--- arch/arm/boot/dts/versatile-pb.dts | 20 +++++++++++++++++++- 2 files changed, 26 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index 01f40197ea13..3279bf1a17a1 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -110,7 +110,11 @@ interrupt-parent = <&vic>; interrupts = <31>; /* Cascaded to vic */ clear-mask = <0xffffffff>; - valid-mask = <0xffc203f8>; + /* + * Valid interrupt lines mask according to + * table 4-36 page 4-50 of ARM DUI 0225D + */ + valid-mask = <0x0760031b>; }; dma@10130000 { @@ -266,8 +270,8 @@ }; mmc@5000 { compatible = "arm,pl180", "arm,primecell"; - reg = < 0x5000 0x1000>; - interrupts-extended = <&vic 22 &sic 2>; + reg = <0x5000 0x1000>; + interrupts-extended = <&vic 22 &sic 1>; clocks = <&xtal24mhz>, <&pclk>; clock-names = "mclk", "apb_pclk"; }; diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts index b83137f66034..33a8eb28374e 100644 --- a/arch/arm/boot/dts/versatile-pb.dts +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -5,6 +5,16 @@ compatible = "arm,versatile-pb"; amba { + /* The Versatile PB is using more SIC IRQ lines than the AB */ + sic: intc@10003000 { + clear-mask = <0xffffffff>; + /* + * Valid interrupt lines mask according to + * figure 3-30 page 3-74 of ARM DUI 0224B + */ + valid-mask = <0x7fe003ff>; + }; + gpio2: gpio@101e6000 { compatible = "arm,pl061", "arm,primecell"; reg = <0x101e6000 0x1000>; @@ -67,6 +77,13 @@ }; fpga { + mmc@5000 { + /* + * Overrides the interrupt assignment from + * the Versatile AB board file. + */ + interrupts-extended = <&sic 22 &sic 23>; + }; uart@9000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x9000 0x1000>; @@ -86,7 +103,8 @@ mmc@b000 { compatible = "arm,pl180", "arm,primecell"; reg = <0xb000 0x1000>; - interrupts-extended = <&vic 23 &sic 2>; + interrupt-parent = <&sic>; + interrupts = <1>, <2>; clocks = <&xtal24mhz>, <&pclk>; clock-names = "mclk", "apb_pclk"; }; -- cgit v1.2.3 From e5e57e7a03b1cdcb98e4aed135def2a08cbf3257 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 7 Jan 2016 13:50:38 +0100 Subject: kvm: x86: only channel 0 of the i8254 is linked to the HPET While setting the KVM PIT counters in 'kvm_pit_load_count', if 'hpet_legacy_start' is set, the function disables the timer on channel[0], instead of the respective index 'channel'. This is because channels 1-3 are not linked to the HPET. Fix the caller to only activate the special HPET processing for channel 0. Reported-by: P J P Fixes: 0185604c2d82c560dab2f2933a18f797e74ab5a8 Signed-off-by: Paolo Bonzini --- arch/x86/kvm/i8254.c | 1 + arch/x86/kvm/x86.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c index 08116ff227cc..b0ea42b78ccd 100644 --- a/arch/x86/kvm/i8254.c +++ b/arch/x86/kvm/i8254.c @@ -420,6 +420,7 @@ void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val, int hpet_legacy_s u8 saved_mode; if (hpet_legacy_start) { /* save existing mode for later reenablement */ + WARN_ON(channel != 0); saved_mode = kvm->arch.vpit->pit_state.channels[0].mode; kvm->arch.vpit->pit_state.channels[0].mode = 0xff; /* disable timer */ pit_load_count(kvm, channel, val); diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 7ffc224bbe41..97592e190413 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -3606,7 +3606,8 @@ static int kvm_vm_ioctl_set_pit2(struct kvm *kvm, struct kvm_pit_state2 *ps) sizeof(kvm->arch.vpit->pit_state.channels)); kvm->arch.vpit->pit_state.flags = ps->flags; for (i = 0; i < 3; i++) - kvm_pit_load_count(kvm, i, kvm->arch.vpit->pit_state.channels[i].count, start); + kvm_pit_load_count(kvm, i, kvm->arch.vpit->pit_state.channels[i].count, + start && i == 0); mutex_unlock(&kvm->arch.vpit->pit_state.lock); return 0; } -- cgit v1.2.3 From 5b1a618118e7600c144f6e39e5337ae00ca5a346 Mon Sep 17 00:00:00 2001 From: Timo Sigurdsson Date: Fri, 1 Jan 2016 14:38:22 +0100 Subject: ARM: Fix broken USB support in multi_v7_defconfig for sunxi devices Commit 69fb4dcada77 ("power: Add an axp20x-usb-power driver") introduced a new driver for the USB power supply used on various Allwinner based SBCs. However, the driver was not added to multi_v7_defconfig which breaks USB support for some boards (e.g. LeMaker BananaPi) as the kernel will now turn off the USB power supply during boot by default if the driver isn't present. (This was not the case in linux 4.3 or lower where the USB power was always left on.) Hence, add the driver to multi_v7_defconfig in order to keep USB support working on those boards that require it. Signed-off-by: Timo Sigurdsson Tested-by: Timo Sigurdsson Acked-by: Maxime Ripard Signed-off-by: Arnd Bergmann --- arch/arm/configs/multi_v7_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 69a22fdb52a5..cd7b198fc79e 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -366,6 +366,7 @@ CONFIG_BATTERY_MAX17042=m CONFIG_CHARGER_MAX14577=m CONFIG_CHARGER_MAX77693=m CONFIG_CHARGER_TPS65090=y +CONFIG_AXP20X_POWER=m CONFIG_POWER_RESET_AS3722=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_GPIO_RESTART=y -- cgit v1.2.3 From 0f090bf14e51e7eefb71d9d1c545807f8b627986 Mon Sep 17 00:00:00 2001 From: Roman Volkov Date: Fri, 1 Jan 2016 16:38:11 +0300 Subject: dts: vt8500: Add SDHC node to DTS file for WM8650 Since WM8650 has the same 'WMT' SDHC controller as WM8505, and the driver is already in the kernel, this node enables the controller support for WM8650 Signed-off-by: Roman Volkov Reviewed-by: Alexey Charkov Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/wm8650.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi index b1c59a766a13..e12213d16693 100644 --- a/arch/arm/boot/dts/wm8650.dtsi +++ b/arch/arm/boot/dts/wm8650.dtsi @@ -187,6 +187,15 @@ interrupts = <43>; }; + sdhc@d800a000 { + compatible = "wm,wm8505-sdhc"; + reg = <0xd800a000 0x400>; + interrupts = <20>, <21>; + clocks = <&clksdhc>; + bus-width = <4>; + sdon-inverted; + }; + fb: fb@d8050800 { compatible = "wm,wm8505-fb"; reg = <0xd8050800 0x200>; -- cgit v1.2.3 From 77a8f0ad38844b5d4163424c4feb8abbbbb55af0 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sun, 17 Jan 2016 10:18:12 -0800 Subject: Input: rotary_encoder - convert to use gpiod API Instead of using old GPIO API, let's switch to GPIOD API, which automatically handles polarity. Signed-off-by: Dmitry Torokhov --- arch/arm/mach-pxa/raumfeld.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 36571a9a44fe..bac88e0be58a 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -366,14 +367,21 @@ static struct pxaohci_platform_data raumfeld_ohci_info = { * Rotary encoder input device */ +static struct gpiod_lookup_table raumfeld_rotary_gpios_table = { + .dev_id = "rotary-encoder.0", + .table = { + GPIO_LOOKUP_IDX("gpio-0", + GPIO_VOLENC_A, NULL, 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("gpio-0", + GPIO_VOLENC_B, NULL, 1, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct rotary_encoder_platform_data raumfeld_rotary_encoder_info = { .steps = 24, .axis = REL_X, .relative_axis = 1, - .gpio_a = GPIO_VOLENC_A, - .gpio_b = GPIO_VOLENC_B, - .inverted_a = 1, - .inverted_b = 0, }; static struct platform_device rotary_encoder_device = { @@ -1051,7 +1059,10 @@ static void __init raumfeld_controller_init(void) int ret; pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config)); + + gpiod_add_lookup_table(&raumfeld_rotary_gpios_table); platform_device_register(&rotary_encoder_device); + spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices)); i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1); @@ -1086,6 +1097,8 @@ static void __init raumfeld_speaker_init(void) i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1); platform_device_register(&smc91x_device); + + gpiod_add_lookup_table(&raumfeld_rotary_gpios_table); platform_device_register(&rotary_encoder_device); raumfeld_audio_init(); -- cgit v1.2.3 From a9e340dce3c3bceeb42f6b6d33b7858822d76cb6 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sun, 17 Jan 2016 10:57:09 -0800 Subject: Input: rotary_encoder - move away from platform data structure Drop support for platform data passed via a C-structure and switch to device properties instead, which should make the driver compatible with all platforms: OF, ACPI and static boards. Static boards should use property sets to communicate device parameters to the driver. Signed-off-by: Dmitry Torokhov --- arch/arm/mach-pxa/raumfeld.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index bac88e0be58a..82689ac20ccf 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -18,13 +18,13 @@ #include #include +#include #include #include #include #include #include #include -#include #include #include #include @@ -378,18 +378,27 @@ static struct gpiod_lookup_table raumfeld_rotary_gpios_table = { }, }; -static struct rotary_encoder_platform_data raumfeld_rotary_encoder_info = { - .steps = 24, - .axis = REL_X, - .relative_axis = 1, +static u32 raumfeld_rotary_encoder_steps = 24; +static u32 raumfeld_rotary_encoder_axis = REL_X; +static u32 raumfeld_rotary_encoder_relative_axis = 1; + +static struct property_entry raumfeld_rotary_properties[] = { + { "rotary-encoder,steps-per-period", + DEV_PROP_U32, 1, &raumfeld_rotary_encoder_steps, }, + { "linux,axis", + DEV_PROP_U32, 1, &raumfeld_rotary_encoder_axis, }, + { "rotary-encoder,relative_axis", + DEV_PROP_U32, 1, &raumfeld_rotary_encoder_relative_axis, }, + { NULL } +}; + +static struct property_set raumfeld_rotary_property_set = { + .properties = raumfeld_rotary_properties, }; static struct platform_device rotary_encoder_device = { .name = "rotary-encoder", .id = 0, - .dev = { - .platform_data = &raumfeld_rotary_encoder_info, - } }; /** @@ -1061,6 +1070,8 @@ static void __init raumfeld_controller_init(void) pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config)); gpiod_add_lookup_table(&raumfeld_rotary_gpios_table); + device_add_property_set(&rotary_encoder_device.dev, + &raumfeld_rotary_property_set); platform_device_register(&rotary_encoder_device); spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices)); @@ -1099,6 +1110,8 @@ static void __init raumfeld_speaker_init(void) platform_device_register(&smc91x_device); gpiod_add_lookup_table(&raumfeld_rotary_gpios_table); + device_add_property_set(&rotary_encoder_device.dev, + &raumfeld_rotary_property_set); platform_device_register(&rotary_encoder_device); raumfeld_audio_init(); -- cgit v1.2.3