From 12221d434eb60e3bf0851d747b17395b7083a76d Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Tue, 15 Nov 2011 01:42:09 +0530 Subject: ARM: davinci: add support for multiple power domains On a new SoC based on DaVinci, there are multiple power domains similar to that in C6670 (c6x). Currently the clock module assumes that there are only two power domains (0 and 1). This patch removes this restriction to allow porting on to the new SoC. Reviewed-by :Sergei Shtylyov Signed-off-by: Murali Karicheri Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/clock.c | 13 +++---------- arch/arm/mach-davinci/clock.h | 10 +++++----- arch/arm/mach-davinci/dm644x.c | 4 ++-- 3 files changed, 10 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index 00861139101d..008772e3b843 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -31,19 +31,12 @@ static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); static DEFINE_SPINLOCK(clockfw_lock); -static unsigned psc_domain(struct clk *clk) -{ - return (clk->flags & PSC_DSP) - ? DAVINCI_GPSC_DSPDOMAIN - : DAVINCI_GPSC_ARMDOMAIN; -} - static void __clk_enable(struct clk *clk) { if (clk->parent) __clk_enable(clk->parent); if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) - davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, + davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc, true, clk->flags); } @@ -53,7 +46,7 @@ static void __clk_disable(struct clk *clk) return; if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) && (clk->flags & CLK_PSC)) - davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, + davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc, false, clk->flags); if (clk->parent) __clk_disable(clk->parent); @@ -237,7 +230,7 @@ static int __init clk_disable_unused(void) pr_debug("Clocks: disable unused %s\n", ck->name); - davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc, + davinci_psc_config(ck->domain, ck->gpsc, ck->lpsc, false, ck->flags); } spin_unlock_irq(&clockfw_lock); diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index a705f367a84d..46f0f1bf1a4c 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -93,6 +93,7 @@ struct clk { u8 usecount; u8 lpsc; u8 gpsc; + u8 domain; u32 flags; struct clk *parent; struct list_head children; /* list of children */ @@ -107,11 +108,10 @@ struct clk { /* Clock flags: SoC-specific flags start at BIT(16) */ #define ALWAYS_ENABLED BIT(1) #define CLK_PSC BIT(2) -#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */ -#define CLK_PLL BIT(4) /* PLL-derived clock */ -#define PRE_PLL BIT(5) /* source is before PLL mult/div */ -#define PSC_SWRSTDISABLE BIT(6) /* Disable state is SwRstDisable */ -#define PSC_FORCE BIT(7) /* Force module state transtition */ +#define CLK_PLL BIT(3) /* PLL-derived clock */ +#define PRE_PLL BIT(4) /* source is before PLL mult/div */ +#define PSC_SWRSTDISABLE BIT(5) /* Disable state is SwRstDisable */ +#define PSC_FORCE BIT(6) /* Force module state transtition */ #define CLK(dev, con, ck) \ { \ diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 3470983aa343..b95097dbdfed 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -130,7 +130,7 @@ static struct clk dsp_clk = { .name = "dsp", .parent = &pll1_sysclk1, .lpsc = DAVINCI_LPSC_GEM, - .flags = PSC_DSP, + .domain = DAVINCI_GPSC_DSPDOMAIN, .usecount = 1, /* REVISIT how to disable? */ }; @@ -145,7 +145,7 @@ static struct clk vicp_clk = { .name = "vicp", .parent = &pll1_sysclk2, .lpsc = DAVINCI_LPSC_IMCOP, - .flags = PSC_DSP, + .domain = DAVINCI_GPSC_DSPDOMAIN, .usecount = 1, /* REVISIT how to disable? */ }; -- cgit v1.2.3 From bd0552ed05e019995a6fd2b1064919d7c6e14554 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Mon, 5 Dec 2011 08:35:55 -0600 Subject: ARM: highbank: add xgmac ethernet devices to dts Add device nodes for xgmac ethernet block in Calxeda Highbank. Signed-off-by: Rob Herring --- arch/arm/boot/dts/highbank.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index aeb1a7578fad..305635bd45c0 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -194,5 +194,17 @@ reg = <0xfff3d000 0x1000>; interrupts = <0 92 4>; }; + + ethernet@fff50000 { + compatible = "calxeda,hb-xgmac"; + reg = <0xfff50000 0x1000>; + interrupts = <0 77 4 0 78 4 0 79 4>; + }; + + ethernet@fff51000 { + compatible = "calxeda,hb-xgmac"; + reg = <0xfff51000 0x1000>; + interrupts = <0 80 4 0 81 4 0 82 4>; + }; }; }; -- cgit v1.2.3 From ee62e93a3c135ae18f2fa18615ce065fe5487259 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 8 Dec 2011 14:58:38 -0800 Subject: ARM: OMAP1: Set the omap1623 sram size to 16K Now that we're always reprogramming the core clock we must make sure SRAM works. It seems that neither omap1621 or omap1623 has 256K of SRAM. Set the SRAM size to safe value of 16K. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/sram.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 8b28664d1c62..574351902c83 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -141,11 +141,9 @@ static void __init omap_detect_sram(void) omap_sram_size = 0x32000; /* 200K */ else if (cpu_is_omap15xx()) omap_sram_size = 0x30000; /* 192K */ - else if (cpu_is_omap1610() || cpu_is_omap1621() || - cpu_is_omap1710()) + else if (cpu_is_omap1610() || cpu_is_omap1611() || + cpu_is_omap1621() || cpu_is_omap1710()) omap_sram_size = 0x4000; /* 16K */ - else if (cpu_is_omap1611()) - omap_sram_size = SZ_256K; else { pr_err("Could not detect SRAM size\n"); omap_sram_size = 0x4000; -- cgit v1.2.3 From 24ce2705c2dd50e51f325c6e57dec378adc8c135 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 8 Dec 2011 18:01:41 -0800 Subject: ARM: OMAP1: Move dpll1 rates selection from config to runtime For still better multi-OMAP1 support, expand omap1_rate_table with flags for different SoC types and match them while selecting clock rates. The idea is stolen from current omap24xx clock rate selection algorithm. Since clkdev platform flag definitions are reused here, those had to be expanded with one extra entry for OMAP1710 subtype, as this is the only SoC for which we allow selection of the highest, 216 MHz rate. Once done, remove no longer needed clock rate configure time options. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren --- arch/arm/configs/omap1_defconfig | 1 - arch/arm/mach-omap1/Kconfig | 64 --------------------------- arch/arm/mach-omap1/clock.c | 6 +++ arch/arm/mach-omap1/clock.h | 3 ++ arch/arm/mach-omap1/clock_data.c | 6 ++- arch/arm/mach-omap1/opp.h | 1 + arch/arm/mach-omap1/opp_data.c | 63 ++++++++++++-------------- arch/arm/plat-omap/include/plat/clkdev_omap.h | 1 + 8 files changed, 45 insertions(+), 100 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 945a34f2a34d..dde2a1af7b39 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -48,7 +48,6 @@ CONFIG_MACH_SX1=y CONFIG_MACH_NOKIA770=y CONFIG_MACH_AMS_DELTA=y CONFIG_MACH_OMAP_GENERIC=y -CONFIG_OMAP_ARM_182MHZ=y # CONFIG_ARM_THUMB is not set CONFIG_PCCARD=y CONFIG_OMAP_CF=y diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 73f287d6429b..4f8d66f044e7 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -168,70 +168,6 @@ config MACH_OMAP_GENERIC custom OMAP boards. Say Y here if you have a custom board. -comment "OMAP CPU Speed" - depends on ARCH_OMAP1 - -config OMAP_ARM_216MHZ - bool "OMAP ARM 216 MHz CPU (1710 only)" - depends on ARCH_OMAP1 && ARCH_OMAP16XX - help - Enable 216 MHz clock for OMAP1710 CPU. If unsure, say N. - -config OMAP_ARM_195MHZ - bool "OMAP ARM 195 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850) - help - Enable 195MHz clock for OMAP CPU. If unsure, say N. - -config OMAP_ARM_192MHZ - bool "OMAP ARM 192 MHz CPU" - depends on ARCH_OMAP1 && ARCH_OMAP16XX - help - Enable 192MHz clock for OMAP CPU. If unsure, say N. - -config OMAP_ARM_182MHZ - bool "OMAP ARM 182 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850) - help - Enable 182MHz clock for OMAP CPU. If unsure, say N. - -config OMAP_ARM_168MHZ - bool "OMAP ARM 168 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850) - help - Enable 168MHz clock for OMAP CPU. If unsure, say N. - -config OMAP_ARM_150MHZ - bool "OMAP ARM 150 MHz CPU" - depends on ARCH_OMAP1 && ARCH_OMAP15XX - help - Enable 150MHz clock for OMAP CPU. If unsure, say N. - -config OMAP_ARM_120MHZ - bool "OMAP ARM 120 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850) - help - Enable 120MHz clock for OMAP CPU. If unsure, say N. - -config OMAP_ARM_96MHZ - bool "OMAP ARM 96 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850) - help - Enable 96MHz clock for OMAP CPU. If unsure, say N. - -config OMAP_ARM_60MHZ - bool "OMAP ARM 60 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850) - default y - help - Enable 60MHz clock for OMAP CPU. If unsure, say Y. - -config OMAP_ARM_30MHZ - bool "OMAP ARM 30 MHz CPU" - depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850) - help - Enable 30MHz clock for OMAP CPU. If unsure, say N. - endmenu endif diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 84ef70476b51..ff27dbdba3d6 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -197,6 +197,9 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate) ref_rate = ck_ref_p->rate; for (ptr = omap1_rate_table; ptr->rate; ptr++) { + if (!(ptr->flags & cpu_mask)) + continue; + if (ptr->xtal != ref_rate) continue; @@ -290,6 +293,9 @@ long omap1_round_to_table_rate(struct clk *clk, unsigned long rate) highest_rate = -EINVAL; for (ptr = omap1_rate_table; ptr->rate; ptr++) { + if (!(ptr->flags & cpu_mask)) + continue; + if (ptr->xtal != ref_rate) continue; diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 16b1423b454a..3d04f4f67676 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -111,4 +111,7 @@ extern const struct clkops clkops_dummy; extern const struct clkops clkops_uart_16xx; extern const struct clkops clkops_generic; +/* used for passing SoC type to omap1_{select,round_to}_table_rate() */ +extern u32 cpu_mask; + #endif diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 9ff90a744a21..ff2d5248df23 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -778,12 +778,14 @@ static void __init omap1_show_rates(void) arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); } +u32 cpu_mask; + int __init omap1_clk_init(void) { struct omap_clk *c; const struct omap_clock_config *info; int crystal_type = 0; /* Default 12 MHz */ - u32 reg, cpu_mask; + u32 reg; #ifdef CONFIG_DEBUG_LL /* @@ -808,6 +810,8 @@ int __init omap1_clk_init(void) clk_preinit(c->lk.clk); cpu_mask = 0; + if (cpu_is_omap1710()) + cpu_mask |= CK_1710; if (cpu_is_omap16xx()) cpu_mask |= CK_16XX; if (cpu_is_omap1510()) diff --git a/arch/arm/mach-omap1/opp.h b/arch/arm/mach-omap1/opp.h index 07074d79adce..79a683864a5c 100644 --- a/arch/arm/mach-omap1/opp.h +++ b/arch/arm/mach-omap1/opp.h @@ -21,6 +21,7 @@ struct mpu_rate { unsigned long pll_rate; __u16 ckctl_val; __u16 dpllctl_val; + u32 flags; }; extern struct mpu_rate omap1_rate_table[]; diff --git a/arch/arm/mach-omap1/opp_data.c b/arch/arm/mach-omap1/opp_data.c index 75a546514994..9cd4ddb51397 100644 --- a/arch/arm/mach-omap1/opp_data.c +++ b/arch/arm/mach-omap1/opp_data.c @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include #include "opp.h" /*------------------------------------------------------------------------- @@ -20,40 +21,34 @@ struct mpu_rate omap1_rate_table[] = { * NOTE: Comment order here is different from bits in CKCTL value: * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv */ -#if defined(CONFIG_OMAP_ARM_216MHZ) - { 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_195MHZ) - { 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_192MHZ) - { 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */ - { 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */ - { 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */ - { 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */ - { 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_182MHZ) - { 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_168MHZ) - { 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_150MHZ) - { 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */ -#endif -#if defined(CONFIG_OMAP_ARM_120MHZ) - { 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */ -#endif -#if defined(CONFIG_OMAP_ARM_96MHZ) - { 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */ -#endif -#if defined(CONFIG_OMAP_ARM_60MHZ) - { 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */ -#endif -#if defined(CONFIG_OMAP_ARM_30MHZ) - { 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */ -#endif + { 216000000, 12000000, 216000000, 0x050d, 0x2910, /* 1/1/2/2/2/8 */ + CK_1710 }, + { 195000000, 13000000, 195000000, 0x050e, 0x2790, /* 1/1/2/2/4/8 */ + CK_7XX }, + { 192000000, 19200000, 192000000, 0x050f, 0x2510, /* 1/1/2/2/8/8 */ + CK_16XX }, + { 192000000, 12000000, 192000000, 0x050f, 0x2810, /* 1/1/2/2/8/8 */ + CK_16XX }, + { 96000000, 12000000, 192000000, 0x055f, 0x2810, /* 2/2/2/2/8/8 */ + CK_16XX }, + { 48000000, 12000000, 192000000, 0x0baf, 0x2810, /* 4/4/4/8/8/8 */ + CK_16XX }, + { 24000000, 12000000, 192000000, 0x0fff, 0x2810, /* 8/8/8/8/8/8 */ + CK_16XX }, + { 182000000, 13000000, 182000000, 0x050e, 0x2710, /* 1/1/2/2/4/8 */ + CK_7XX }, + { 168000000, 12000000, 168000000, 0x010f, 0x2710, /* 1/1/1/2/8/8 */ + CK_16XX|CK_7XX }, + { 150000000, 12000000, 150000000, 0x010a, 0x2cb0, /* 1/1/1/2/4/4 */ + CK_1510 }, + { 120000000, 12000000, 120000000, 0x010a, 0x2510, /* 1/1/1/2/4/4 */ + CK_16XX|CK_1510|CK_310|CK_7XX }, + { 96000000, 12000000, 96000000, 0x0005, 0x2410, /* 1/1/1/1/2/2 */ + CK_16XX|CK_1510|CK_310|CK_7XX }, + { 60000000, 12000000, 60000000, 0x0005, 0x2290, /* 1/1/1/1/2/2 */ + CK_16XX|CK_1510|CK_310|CK_7XX }, + { 30000000, 12000000, 60000000, 0x0555, 0x2290, /* 2/2/2/2/2/2 */ + CK_16XX|CK_1510|CK_310|CK_7XX }, { 0, 0, 0, 0, 0 }, }; diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h index 387a9638991b..b299b8d201c8 100644 --- a/arch/arm/plat-omap/include/plat/clkdev_omap.h +++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h @@ -40,6 +40,7 @@ struct omap_clk { #define CK_443X (1 << 11) #define CK_TI816X (1 << 12) #define CK_446X (1 << 13) +#define CK_1710 (1 << 15) /* 1710 extra for rate selection */ #define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS) -- cgit v1.2.3 From f9e5908fa04e15a681dc4695b53c2c0c1d9b9a03 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 1 Dec 2011 22:16:26 +0100 Subject: ARM: OMAP1: Update dpll1 default rate reprogramming method According to comments in omap1_select_table_rate(), reprogramming dpll1 is tricky, and should always be done from SRAM. While being at it, move OMAP730 special case handling inside omap_sram_reprogram_clock(). Created on top of version 2 of the series "ARM: OMAP1: Fix dpll1 reprogramming related issues", which it depends on. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/clock.c | 6 +----- arch/arm/mach-omap1/clock_data.c | 7 +++++-- arch/arm/plat-omap/sram.c | 3 +++ 3 files changed, 9 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index ff27dbdba3d6..6d8f7c640237 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -218,12 +218,8 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate) /* * In most cases we should not need to reprogram DPLL. * Reprogramming the DPLL is tricky, it must be done from SRAM. - * (on 730, bit 13 must always be 1) */ - if (cpu_is_omap7xx()) - omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000); - else - omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); + omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); /* XXX Do we need to recalculate the tree below DPLL1 at this point? */ ck_dpll1_p->rate = ptr->pll_rate; diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index ff2d5248df23..9d1a42a5afd8 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -25,6 +25,7 @@ #include #include #include +#include /* for omap_sram_reprogram_clock() */ #include /* for OTG_BASE */ #include "clock.h" @@ -944,8 +945,10 @@ void __init omap1_clk_late_init(void) /* Find the highest supported frequency and enable it */ if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { pr_err("System frequencies not set, using default. Check your config.\n"); - omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap7xx() ? 0x2005 : 0x0005, ARM_CKCTL); + /* + * Reprogramming the DPLL is tricky, it must be done from SRAM. + */ + omap_sram_reprogram_clock(0x2290, 0x0005); ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE; } propagate_rate(&ck_dpll1); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 574351902c83..6b058a621e8d 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -222,6 +222,9 @@ static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) { BUG_ON(!_omap_sram_reprogram_clock); + /* On 730, bit 13 must always be 1 */ + if (cpu_is_omap7xx()) + ckctl |= 0x2000; _omap_sram_reprogram_clock(dpllctl, ckctl); } -- cgit v1.2.3 From c116abc43df9ce3ebe5fbf2fbd6ae2edd6a9bd87 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Sun, 4 Dec 2011 16:07:47 +0100 Subject: ARM: OMAP1: Always reprogram dpll1 rate at boot DPLL1 reprogramming to a different rate is actually blocked inside omap1_select_table_rate(). However, it is already forced at boot, for boards which boot at unusable clock rates, and this seems to work correctly. OTOH, we now have a fine, run time performed clock selection algorithm implemented, which prevents less powerfull SoCs from being overclocked unintentionally. Allow reprogramming of dpll1 by default, and use it for switching to the higest supported clock rate with all boards, including those already booting at a usable rate of 60 MHz or above. Created against linux-omap/master tip as of Thu Dec 1, commit f83c2a8cbb59981722d1ab610c79adfd034a2667. Requires the just submitted patch "ARM: OMAP1: Move dpll1 rates selection from config to runtime" to prevent from unintentional overclocking. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/clock.c | 4 ---- arch/arm/mach-omap1/clock_data.c | 6 ------ 2 files changed, 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 6d8f7c640237..0c50df05d135 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -203,10 +203,6 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate) if (ptr->xtal != ref_rate) continue; - /* DPLL1 cannot be reprogrammed without risking system crash */ - if (likely(dpll1_rate != 0) && ptr->pll_rate != dpll1_rate) - continue; - /* Can check only after xtal frequency check */ if (ptr->rate <= rate) break; diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 9d1a42a5afd8..94699a82a734 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -936,12 +936,6 @@ void __init omap1_clk_late_init(void) { unsigned long rate = ck_dpll1.rate; - if (rate >= OMAP1_DPLL1_SANE_VALUE) - return; - - /* System booting at unusable rate, force reprogramming of DPLL1 */ - ck_dpll1_p->rate = 0; - /* Find the highest supported frequency and enable it */ if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { pr_err("System frequencies not set, using default. Check your config.\n"); -- cgit v1.2.3 From 559f7a0346a48af91f6127677c843d0182ac0715 Mon Sep 17 00:00:00 2001 From: Stefan Nilsson XK Date: Wed, 26 Oct 2011 10:49:35 +0200 Subject: ARM: ux500: support SD cards on HREFv60 boards Properly support the correct SDI-init sequence on the ST-Ericsson HREFv60 and later boards in order to get support for SD cards. Signed-off-by: Stefan Nilsson XK Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500.c | 2 +- arch/arm/mach-ux500/board-mop500.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index bdd7b80dd7ad..eb85e75d86ba 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -672,7 +672,7 @@ static void __init hrefv60_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); mop500_i2c_init(); - mop500_sdi_init(); + hrefv60_sdi_init(); mop500_spi_init(); mop500_uart_init(); diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index de18a2a23e6e..e82552ae97e3 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -41,6 +41,7 @@ struct i2c_board_info; extern void mop500_sdi_init(void); extern void snowball_sdi_init(void); +extern void hrefv60_sdi_init(void); extern void mop500_sdi_tc35892_init(void); void __init mop500_u8500uib_init(void); void __init mop500_stuib_init(void); -- cgit v1.2.3 From 76d6717bce0e725b280ca18b42725421774eb554 Mon Sep 17 00:00:00 2001 From: Stefan Nilsson XK Date: Wed, 26 Oct 2011 10:50:42 +0200 Subject: ARM: ux500: add device sdi1 for SDIO Adds device sdi1 for ST-Ericsson HREFv60 and later to enable the possiblity of using the onboard CW1200 chip for WLAN. Signed-off-by: Stefan Nilsson XK Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-sdi.c | 38 ++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 6826faeecc68..cf93dca97b9a 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -131,6 +131,42 @@ void mop500_sdi_tc35892_init(void) sdi0_configure(); } +/* + * SDI1 (SDIO WLAN) + */ +#ifdef CONFIG_STE_DMA40 +static struct stedma40_chan_cfg sdi1_dma_cfg_rx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_PERIPH_TO_MEM, + .src_dev_type = DB8500_DMA_DEV32_SD_MM1_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, +}; + +static struct stedma40_chan_cfg sdi1_dma_cfg_tx = { + .mode = STEDMA40_MODE_LOGICAL, + .dir = STEDMA40_MEM_TO_PERIPH, + .src_dev_type = STEDMA40_DEV_SRC_MEMORY, + .dst_dev_type = DB8500_DMA_DEV32_SD_MM1_TX, + .src_info.data_width = STEDMA40_WORD_WIDTH, + .dst_info.data_width = STEDMA40_WORD_WIDTH, +}; +#endif + +static struct mmci_platform_data mop500_sdi1_data = { + .ocr_mask = MMC_VDD_29_30, + .f_max = 50000000, + .capabilities = MMC_CAP_4_BIT_DATA, + .gpio_cd = -1, + .gpio_wp = -1, +#ifdef CONFIG_STE_DMA40 + .dma_filter = stedma40_filter, + .dma_rx_param = &sdi1_dma_cfg_rx, + .dma_tx_param = &sdi1_dma_cfg_tx, +#endif +}; + /* * SDI 2 (POP eMMC, not on DB8500ed) */ @@ -260,4 +296,6 @@ void __init hrefv60_sdi_init(void) sdi0_en = HREFV60_SDMMC_EN_GPIO; sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; sdi0_configure(); + + db8500_add_sdi1(&mop500_sdi1_data, periphid); } -- cgit v1.2.3 From 017beaa63bd8034b6c6c0f964a57f54973f59f17 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 11 Nov 2011 18:48:52 +0100 Subject: ARM: ux500: update the MOP500 GPIO assignments This is a more complete list of the MOP500 GPIO pins, especially for those used with the Snowball board. Sort GPIO number in falling number order so there is some structure to this file. Fix some whitespace issues in the process. Cc: Mian Yousaf Kaukab Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500.h | 62 ++++++++++++++++++++++++++++++-------- 1 file changed, 49 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index e82552ae97e3..f926d3db6207 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -7,35 +7,71 @@ #ifndef __BOARD_MOP500_H #define __BOARD_MOP500_H -/* snowball GPIO for MMC card */ -#define SNOWBALL_SDMMC_EN_GPIO 217 -#define SNOWBALL_SDMMC_1V8_3V_GPIO 228 -#define SNOWBALL_SDMMC_CD_GPIO 218 +/* Snowball specific GPIO assignments, this board has no GPIO expander */ +#define SNOWBALL_ACCEL_INT1_GPIO 163 +#define SNOWBALL_ACCEL_INT2_GPIO 164 +#define SNOWBALL_MAGNET_DRDY_GPIO 165 +#define SNOWBALL_SDMMC_EN_GPIO 217 +#define SNOWBALL_SDMMC_1V8_3V_GPIO 228 +#define SNOWBALL_SDMMC_CD_GPIO 218 /* HREFv60-specific GPIO assignments, this board has no GPIO expander */ -#define HREFV60_TOUCH_RST_GPIO 143 -#define HREFV60_PROX_SENSE_GPIO 217 -#define HREFV60_HAL_SW_GPIO 145 -#define HREFV60_SDMMC_EN_GPIO 169 #define HREFV60_SDMMC_1V8_3V_GPIO 5 -#define HREFV60_SDMMC_CD_GPIO 95 -#define HREFV60_ACCEL_INT1_GPIO 82 -#define HREFV60_ACCEL_INT2_GPIO 83 +#define HREFV60_CAMERA_FLASH_ENABLE 21 #define HREFV60_MAGNET_DRDY_GPIO 32 #define HREFV60_DISP1_RST_GPIO 65 #define HREFV60_DISP2_RST_GPIO 66 +#define HREFV60_ACCEL_INT1_GPIO 82 +#define HREFV60_ACCEL_INT2_GPIO 83 +#define HREFV60_SDMMC_CD_GPIO 95 +#define HREFV60_XSHUTDOWN_SECONDARY_SENSOR 140 +#define HREFV60_TOUCH_RST_GPIO 143 +#define HREFV60_HAL_SW_GPIO 145 +#define HREFV60_SDMMC_EN_GPIO 169 +#define HREFV60_MMIO_XENON_CHARGE 170 +#define HREFV60_PROX_SENSE_GPIO 217 + +/* MOP500 generic GPIOs */ +#define CAMERA_FLASH_INT_PIN 7 +#define CYPRESS_TOUCH_INT_PIN 84 +#define XSHUTDOWN_PRIMARY_SENSOR 141 +#define XSHUTDOWN_SECONDARY_SENSOR 142 +#define CYPRESS_TOUCH_RST_GPIO 143 +#define MOP500_HDMI_RST_GPIO 196 +#define CYPRESS_SLAVE_SELECT_GPIO 216 /* GPIOs on the TC35892 expander */ #define MOP500_EGPIO(x) (NOMADIK_NR_GPIO + (x)) +#define GPIO_MAGNET_DRDY MOP500_EGPIO(1) #define GPIO_SDMMC_CD MOP500_EGPIO(3) +#define GPIO_CAMERA_FLASH_ENABLE MOP500_EGPIO(4) +#define GPIO_MMIO_XENON_CHARGE MOP500_EGPIO(5) #define GPIO_PROX_SENSOR MOP500_EGPIO(7) +#define GPIO_HAL_SENSOR MOP500_EGPIO(8) +#define GPIO_ACCEL_INT1 MOP500_EGPIO(10) +#define GPIO_ACCEL_INT2 MOP500_EGPIO(11) #define GPIO_BU21013_CS MOP500_EGPIO(13) +#define MOP500_DISP2_RST_GPIO MOP500_EGPIO(14) +#define MOP500_DISP1_RST_GPIO MOP500_EGPIO(15) #define GPIO_SDMMC_EN MOP500_EGPIO(17) #define GPIO_SDMMC_1V8_3V_SEL MOP500_EGPIO(18) #define MOP500_EGPIO_END MOP500_EGPIO(24) -/* GPIOs on the AB8500 mixed-signals circuit */ -#define MOP500_AB8500_GPIO(x) (MOP500_EGPIO_END + (x)) +/* + * GPIOs on the AB8500 mixed-signals circuit + * Notice that we subtract 1 from the number passed into the macro, this is + * because the AB8500 GPIO pins are enumbered starting from 1, so the value in + * parens matches the GPIO pin number in the data sheet. + */ +#define MOP500_AB8500_GPIO(x) (MOP500_EGPIO_END + (x) - 1) +/*Snowball AB8500 GPIO */ +#define SNOWBALL_VSMPS2_1V8_GPIO MOP500_AB8500_PIN_GPIO(1) /* SYSCLKREQ2/GPIO1 */ +#define SNOWBALL_PM_GPIO1_GPIO MOP500_AB8500_PIN_GPIO(2) /* SYSCLKREQ3/GPIO2 */ +#define SNOWBALL_WLAN_CLK_REQ_GPIO MOP500_AB8500_PIN_GPIO(3) /* SYSCLKREQ4/GPIO3 */ +#define SNOWBALL_PM_GPIO4_GPIO MOP500_AB8500_PIN_GPIO(4) /* SYSCLKREQ6/GPIO4 */ +#define SNOWBALL_EN_3V6_GPIO MOP500_AB8500_PIN_GPIO(16) /* PWMOUT3/GPIO16 */ +#define SNOWBALL_PME_ETH_GPIO MOP500_AB8500_PIN_GPIO(24) /* SYSCLKREQ7/GPIO24 */ +#define SNOWBALL_EN_3V3_ETH_GPIO MOP500_AB8500_PIN_GPIO(26) /* GPIO26 */ struct i2c_board_info; -- cgit v1.2.3 From a87d89e74f0a4b56eaee8c3ef74bce69277b780f Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Thu, 3 Nov 2011 12:57:43 +0000 Subject: ARM: Kirkwood: Recognize A1 revision of 6282 chip Recognize the Kirkwood 6282 revision A1 chip since products using this chip are shipping now, such as the QNAP TS-x19P II devices. Signed-off-by: Martin Michlmayr Acked-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/common.c | 2 ++ arch/arm/mach-kirkwood/include/mach/kirkwood.h | 1 + 2 files changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index f3248cfbe51d..b9632ee57b06 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -430,6 +430,8 @@ static char * __init kirkwood_id(void) } else if (dev == MV88F6282_DEV_ID) { if (rev == MV88F6282_REV_A0) return "MV88F6282-Rev-A0"; + else if (rev == MV88F6282_REV_A1) + return "MV88F6282-Rev-A1"; else return "MV88F6282-Rev-Unsupported"; } else { diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index 010bdeb4ac5f..fede3d503efa 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -135,4 +135,5 @@ #define MV88F6282_DEV_ID 0x6282 #define MV88F6282_REV_A0 0 +#define MV88F6282_REV_A1 1 #endif -- cgit v1.2.3 From 527ef0550d79e3b3a0ef8f5061072075afef6aaf Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Thu, 1 Dec 2011 11:58:25 +0100 Subject: ARM: Kirkwood: Add configuration for MPP12 as GPIO The MPP12 is listed in the 6281 HW manual as output only but the iconnect board from iomega is using it as GPIO (there's a button connected on it). So, I'm adding a definition for the MPP12 as GPIO. As I've no informations about this and which kirkwood are "affected", I'm adding a new #define instead of modifying the current one for MPP12. Signed-off-by: Arnaud Patard Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/mpp.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h index ac787957e2d9..e8fda45c0736 100644 --- a/arch/arm/mach-kirkwood/mpp.h +++ b/arch/arm/mach-kirkwood/mpp.h @@ -102,6 +102,7 @@ #define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 ) #define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 ) +#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 ) #define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 ) #define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 ) #define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 ) -- cgit v1.2.3 From b6d1c33a31deb1784c1d34070db6e84fd6f9d870 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 7 Dec 2011 21:48:05 +0100 Subject: ARM: Orion: Consolidate the address map setup Compile tested on Dove, orion5x, mv78xx0. Boot tested on Kirkwood. Signed-off-by: Andrew Lunn Tested-by: Michael Walle Acked-by: Nicolas Pitre Signed-off-by: Nicolas Pitre --- arch/arm/mach-dove/addr-map.c | 113 ++++++++---------- arch/arm/mach-kirkwood/addr-map.c | 138 +++++++--------------- arch/arm/mach-mv78xx0/addr-map.c | 102 ++++------------ arch/arm/mach-orion5x/addr-map.c | 146 ++++++++--------------- arch/arm/mach-orion5x/common.c | 7 +- arch/arm/mach-orion5x/common.h | 2 +- arch/arm/mach-orion5x/include/mach/orion5x.h | 2 +- arch/arm/plat-orion/Makefile | 2 +- arch/arm/plat-orion/addr-map.c | 166 +++++++++++++++++++++++++++ arch/arm/plat-orion/include/plat/addr-map.h | 52 +++++++++ 10 files changed, 375 insertions(+), 355 deletions(-) create mode 100644 arch/arm/plat-orion/addr-map.c create mode 100644 arch/arm/plat-orion/include/plat/addr-map.h (limited to 'arch') diff --git a/arch/arm/mach-dove/addr-map.c b/arch/arm/mach-dove/addr-map.c index 00be4fc26dd7..1584726088e4 100644 --- a/arch/arm/mach-dove/addr-map.c +++ b/arch/arm/mach-dove/addr-map.c @@ -14,6 +14,7 @@ #include #include #include +#include #include "common.h" /* @@ -34,14 +35,6 @@ #define ATTR_PCIE_MEM 0xe8 #define ATTR_SCRATCHPAD 0x0 -/* - * CPU Address Decode Windows registers - */ -#define WIN_CTRL(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x0) -#define WIN_BASE(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x4) -#define WIN_REMAP_LO(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x8) -#define WIN_REMAP_HI(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0xc) - struct mbus_dram_target_info dove_mbus_dram_info; static inline void __iomem *ddr_map_sc(int i) @@ -49,78 +42,62 @@ static inline void __iomem *ddr_map_sc(int i) return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4)); } -static int cpu_win_can_remap(int win) -{ - if (win < 4) - return 1; - - return 0; -} - -static void __init setup_cpu_win(int win, u32 base, u32 size, - u8 target, u8 attr, int remap) -{ - u32 ctrl; - - base &= 0xffff0000; - ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1; - - writel(base, WIN_BASE(win)); - writel(ctrl, WIN_CTRL(win)); - if (cpu_win_can_remap(win)) { - if (remap < 0) - remap = base; - writel(remap & 0xffff0000, WIN_REMAP_LO(win)); - writel(0, WIN_REMAP_HI(win)); - } -} - -void __init dove_setup_cpu_mbus(void) -{ - int i; - int cs; +/* + * Description of the windows needed by the platform code + */ +static struct __initdata orion_addr_map_cfg addr_map_cfg = { + .num_wins = 8, + .remappable_wins = 4, + .bridge_virt_base = BRIDGE_VIRT_BASE, +}; +static const struct __initdata orion_addr_map_info addr_map_info[] = { /* - * First, disable and clear windows. + * Windows for PCIe IO+MEM space. */ - for (i = 0; i < 8; i++) { - writel(0, WIN_BASE(i)); - writel(0, WIN_CTRL(i)); - if (cpu_win_can_remap(i)) { - writel(0, WIN_REMAP_LO(i)); - writel(0, WIN_REMAP_HI(i)); - } - } - + { 0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE, + TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE + }, + { 1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE, + TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE + }, + { 2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE, + TARGET_PCIE0, ATTR_PCIE_MEM, -1 + }, + { 3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE, + TARGET_PCIE1, ATTR_PCIE_MEM, -1 + }, /* - * Setup windows for PCIe IO+MEM space. + * Window for CESA engine. */ - setup_cpu_win(0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE, - TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE); - setup_cpu_win(1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE, - TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE); - setup_cpu_win(2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE, - TARGET_PCIE0, ATTR_PCIE_MEM, -1); - setup_cpu_win(3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE, - TARGET_PCIE1, ATTR_PCIE_MEM, -1); - + { 4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE, + TARGET_CESA, ATTR_CESA, -1 + }, /* - * Setup window for CESA engine. + * Window to the BootROM for Standby and Sleep Resume */ - setup_cpu_win(4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE, - TARGET_CESA, ATTR_CESA, -1); - + { 5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE, + TARGET_BOOTROM, ATTR_BOOTROM, -1 + }, /* - * Setup the Window to the BootROM for Standby and Sleep Resume + * Window to the PMU Scratch Pad space */ - setup_cpu_win(5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE, - TARGET_BOOTROM, ATTR_BOOTROM, -1); + { 6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE, + TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1 + }, + /* End marker */ + { -1, 0, 0, 0, 0, 0 } +}; + +void __init dove_setup_cpu_mbus(void) +{ + int i; + int cs; /* - * Setup the Window to the PMU Scratch Pad space + * Disable, clear and configure windows. */ - setup_cpu_win(6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE, - TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1); + orion_config_wins(&addr_map_cfg, addr_map_info); /* * Setup MBUS dram target info. diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c index 8d03bcef5182..935392f7e13f 100644 --- a/arch/arm/mach-kirkwood/addr-map.c +++ b/arch/arm/mach-kirkwood/addr-map.c @@ -13,12 +13,12 @@ #include #include #include +#include #include "common.h" /* * Generic Address Decode Windows bit settings */ -#define TARGET_DDR 0 #define TARGET_DEV_BUS 1 #define TARGET_SRAM 3 #define TARGET_PCIE 4 @@ -35,119 +35,59 @@ #define ATTR_PCIE1_MEM 0xd8 #define ATTR_SRAM 0x01 -/* - * Helpers to get DDR bank info - */ -#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3)) -#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3)) +struct mbus_dram_target_info kirkwood_mbus_dram_info; /* - * CPU Address Decode Windows registers + * Description of the windows needed by the platform code */ -#define WIN_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4)) -#define WIN_CTRL_OFF 0x0000 -#define WIN_BASE_OFF 0x0004 -#define WIN_REMAP_LO_OFF 0x0008 -#define WIN_REMAP_HI_OFF 0x000c - - -struct mbus_dram_target_info kirkwood_mbus_dram_info; - -static int __init cpu_win_can_remap(int win) -{ - if (win < 4) - return 1; - - return 0; -} - -static void __init setup_cpu_win(int win, u32 base, u32 size, - u8 target, u8 attr, int remap) -{ - void __iomem *addr = (void __iomem *)WIN_OFF(win); - u32 ctrl; - - base &= 0xffff0000; - ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1; - - writel(base, addr + WIN_BASE_OFF); - writel(ctrl, addr + WIN_CTRL_OFF); - if (cpu_win_can_remap(win)) { - if (remap < 0) - remap = base; - - writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF); - writel(0, addr + WIN_REMAP_HI_OFF); - } -} - -void __init kirkwood_setup_cpu_mbus(void) -{ - void __iomem *addr; - int i; - int cs; +static struct __initdata orion_addr_map_cfg addr_map_cfg = { + .num_wins = 8, + .remappable_wins = 4, + .bridge_virt_base = BRIDGE_VIRT_BASE, +}; +static const struct __initdata orion_addr_map_info addr_map_info[] = { /* - * First, disable and clear windows. + * Windows for PCIe IO+MEM space. */ - for (i = 0; i < 8; i++) { - addr = (void __iomem *)WIN_OFF(i); - - writel(0, addr + WIN_BASE_OFF); - writel(0, addr + WIN_CTRL_OFF); - if (cpu_win_can_remap(i)) { - writel(0, addr + WIN_REMAP_LO_OFF); - writel(0, addr + WIN_REMAP_HI_OFF); - } - } - + { 0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE, + TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE + }, + { 1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE, + TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE + }, + { 2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE, + TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE + }, + { 3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE, + TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE + }, /* - * Setup windows for PCIe IO+MEM space. + * Window for NAND controller. */ - setup_cpu_win(0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE, - TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE); - setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE, - TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE); - setup_cpu_win(2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE, - TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE); - setup_cpu_win(3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE, - TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE); - + { 4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE, + TARGET_DEV_BUS, ATTR_DEV_NAND, -1 + }, /* - * Setup window for NAND controller. + * Window for SRAM. */ - setup_cpu_win(4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE, - TARGET_DEV_BUS, ATTR_DEV_NAND, -1); + { 5, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE, + TARGET_SRAM, ATTR_SRAM, -1 + }, + /* End marker */ + { -1, 0, 0, 0, 0, 0 } +}; +void __init kirkwood_setup_cpu_mbus(void) +{ /* - * Setup window for SRAM. + * Disable, clear and configure windows. */ - setup_cpu_win(5, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE, - TARGET_SRAM, ATTR_SRAM, -1); + orion_config_wins(&addr_map_cfg, addr_map_info); /* * Setup MBUS dram target info. */ - kirkwood_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; - - addr = (void __iomem *)DDR_WINDOW_CPU_BASE; - - for (i = 0, cs = 0; i < 4; i++) { - u32 base = readl(addr + DDR_BASE_CS_OFF(i)); - u32 size = readl(addr + DDR_SIZE_CS_OFF(i)); - - /* - * Chip select enabled? - */ - if (size & 1) { - struct mbus_dram_window *w; - - w = &kirkwood_mbus_dram_info.cs[cs++]; - w->cs_index = i; - w->mbus_attr = 0xf & ~(1 << i); - w->base = base & 0xffff0000; - w->size = (size | 0x0000ffff) + 1; - } - } - kirkwood_mbus_dram_info.num_cs = cs; + orion_setup_cpu_mbus_target(&addr_map_cfg, &kirkwood_mbus_dram_info, + DDR_WINDOW_CPU_BASE); } diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index 311d5b0e9bc7..6b14555e5766 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -12,12 +12,12 @@ #include #include #include +#include #include "common.h" /* * Generic Address Decode Windows bit settings */ -#define TARGET_DDR 0 #define TARGET_DEV_BUS 1 #define TARGET_PCIE0 4 #define TARGET_PCIE1 8 @@ -31,22 +31,11 @@ #define ATTR_PCIE_IO(l) (0xf0 & ~(0x10 << (l))) #define ATTR_PCIE_MEM(l) (0xf8 & ~(0x10 << (l))) -/* - * Helpers to get DDR bank info - */ -#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3)) -#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3)) - /* * CPU Address Decode Windows registers */ #define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4)) #define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4)) -#define WIN_CTRL_OFF 0x0000 -#define WIN_BASE_OFF 0x0004 -#define WIN_REMAP_LO_OFF 0x0008 -#define WIN_REMAP_HI_OFF 0x000c - struct mbus_dram_target_info mv78xx0_mbus_dram_info; @@ -63,94 +52,45 @@ static void __init __iomem *win_cfg_base(int win) return (void __iomem *)((win < 8) ? WIN0_OFF(win) : WIN8_OFF(win)); } -static int __init cpu_win_can_remap(int win) -{ - if (win < 8) - return 1; - - return 0; -} - -static void __init setup_cpu_win(int win, u32 base, u32 size, - u8 target, u8 attr, int remap) -{ - void __iomem *addr = win_cfg_base(win); - u32 ctrl; - - base &= 0xffff0000; - ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1; - - writel(base, addr + WIN_BASE_OFF); - writel(ctrl, addr + WIN_CTRL_OFF); - if (cpu_win_can_remap(win)) { - if (remap < 0) - remap = base; - - writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF); - writel(0, addr + WIN_REMAP_HI_OFF); - } -} +/* + * Description of the windows needed by the platform code + */ +static struct __initdata orion_addr_map_cfg addr_map_cfg = { + .num_wins = 14, + .remappable_wins = 8, + .win_cfg_base = win_cfg_base, +}; void __init mv78xx0_setup_cpu_mbus(void) { - void __iomem *addr; - int i; - int cs; - /* - * First, disable and clear windows. + * Disable, clear and configure windows. */ - for (i = 0; i < 14; i++) { - addr = win_cfg_base(i); - - writel(0, addr + WIN_BASE_OFF); - writel(0, addr + WIN_CTRL_OFF); - if (cpu_win_can_remap(i)) { - writel(0, addr + WIN_REMAP_LO_OFF); - writel(0, addr + WIN_REMAP_HI_OFF); - } - } + orion_config_wins(&addr_map_cfg, NULL); /* * Setup MBUS dram target info. */ - mv78xx0_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; - if (mv78xx0_core_index() == 0) - addr = (void __iomem *)DDR_WINDOW_CPU0_BASE; + orion_setup_cpu_mbus_target(&addr_map_cfg, + &mv78xx0_mbus_dram_info, + DDR_WINDOW_CPU0_BASE); else - addr = (void __iomem *)DDR_WINDOW_CPU1_BASE; - - for (i = 0, cs = 0; i < 4; i++) { - u32 base = readl(addr + DDR_BASE_CS_OFF(i)); - u32 size = readl(addr + DDR_SIZE_CS_OFF(i)); - - /* - * Chip select enabled? - */ - if (size & 1) { - struct mbus_dram_window *w; - - w = &mv78xx0_mbus_dram_info.cs[cs++]; - w->cs_index = i; - w->mbus_attr = 0xf & ~(1 << i); - w->base = base & 0xffff0000; - w->size = (size | 0x0000ffff) + 1; - } - } - mv78xx0_mbus_dram_info.num_cs = cs; + orion_setup_cpu_mbus_target(&addr_map_cfg, + &mv78xx0_mbus_dram_info, + DDR_WINDOW_CPU1_BASE); } void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size, int maj, int min) { - setup_cpu_win(window, base, size, TARGET_PCIE(maj), - ATTR_PCIE_IO(min), -1); + orion_setup_cpu_win(&addr_map_cfg, window, base, size, + TARGET_PCIE(maj), ATTR_PCIE_IO(min), -1); } void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size, int maj, int min) { - setup_cpu_win(window, base, size, TARGET_PCIE(maj), - ATTR_PCIE_MEM(min), -1); + orion_setup_cpu_win(&addr_map_cfg, window, base, size, + TARGET_PCIE(maj), ATTR_PCIE_MEM(min), -1); } diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index 5ceafdccc456..73ceb49de894 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -14,8 +14,8 @@ #include #include #include -#include #include +#include #include "common.h" /* @@ -41,7 +41,6 @@ /* * Generic Address Decode Windows bit settings */ -#define TARGET_DDR 0 #define TARGET_DEV_BUS 1 #define TARGET_PCI 3 #define TARGET_PCIE 4 @@ -57,27 +56,11 @@ #define ATTR_DEV_BOOT 0xf #define ATTR_SRAM 0x0 -/* - * Helpers to get DDR bank info - */ -#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x)) -#define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) << 3)) -#define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) << 3)) - -/* - * CPU Address Decode Windows registers - */ -#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x)) -#define CPU_WIN_CTRL(n) ORION5X_BRIDGE_REG(0x000 | ((n) << 4)) -#define CPU_WIN_BASE(n) ORION5X_BRIDGE_REG(0x004 | ((n) << 4)) -#define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4)) -#define CPU_WIN_REMAP_HI(n) ORION5X_BRIDGE_REG(0x00c | ((n) << 4)) - - struct mbus_dram_target_info orion5x_mbus_dram_info; static int __initdata win_alloc_count; -static int __init orion5x_cpu_win_can_remap(int win) +static int __init cpu_win_can_remap(const struct orion_addr_map_cfg *cfg, + const int win) { u32 dev, rev; @@ -91,116 +74,83 @@ static int __init orion5x_cpu_win_can_remap(int win) return 0; } -static int __init setup_cpu_win(int win, u32 base, u32 size, - u8 target, u8 attr, int remap) -{ - if (win >= 8) { - printk(KERN_ERR "setup_cpu_win: trying to allocate " - "window %d\n", win); - return -ENOSPC; - } - - writel(base & 0xffff0000, CPU_WIN_BASE(win)); - writel(((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1, - CPU_WIN_CTRL(win)); - - if (orion5x_cpu_win_can_remap(win)) { - if (remap < 0) - remap = base; - - writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win)); - writel(0, CPU_WIN_REMAP_HI(win)); - } - return 0; -} - -void __init orion5x_setup_cpu_mbus_bridge(void) -{ - int i; - int cs; +/* + * Description of the windows needed by the platform code + */ +static struct __initdata orion_addr_map_cfg addr_map_cfg = { + .num_wins = 8, + .cpu_win_can_remap = cpu_win_can_remap, + .bridge_virt_base = ORION5X_BRIDGE_VIRT_BASE, +}; +static const struct __initdata orion_addr_map_info addr_map_info[] = { /* - * First, disable and clear windows. + * Setup windows for PCI+PCIe IO+MEM space. */ - for (i = 0; i < 8; i++) { - writel(0, CPU_WIN_BASE(i)); - writel(0, CPU_WIN_CTRL(i)); - if (orion5x_cpu_win_can_remap(i)) { - writel(0, CPU_WIN_REMAP_LO(i)); - writel(0, CPU_WIN_REMAP_HI(i)); - } - } + { 0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE, + TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE + }, + { 1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE, + TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE + }, + { 2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE, + TARGET_PCIE, ATTR_PCIE_MEM, -1 + }, + { 3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE, + TARGET_PCI, ATTR_PCI_MEM, -1 + }, + /* End marker */ + { -1, 0, 0, 0, 0, 0 } +}; +void __init orion5x_setup_cpu_mbus_bridge(void) +{ /* - * Setup windows for PCI+PCIe IO+MEM space. + * Disable, clear and configure windows. */ - setup_cpu_win(0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE, - TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE); - setup_cpu_win(1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE, - TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE); - setup_cpu_win(2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE, - TARGET_PCIE, ATTR_PCIE_MEM, -1); - setup_cpu_win(3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE, - TARGET_PCI, ATTR_PCI_MEM, -1); + orion_config_wins(&addr_map_cfg, addr_map_info); win_alloc_count = 4; /* * Setup MBUS dram target info. */ - orion5x_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; - - for (i = 0, cs = 0; i < 4; i++) { - u32 base = readl(DDR_BASE_CS(i)); - u32 size = readl(DDR_SIZE_CS(i)); - - /* - * Chip select enabled? - */ - if (size & 1) { - struct mbus_dram_window *w; - - w = &orion5x_mbus_dram_info.cs[cs++]; - w->cs_index = i; - w->mbus_attr = 0xf & ~(1 << i); - w->base = base & 0xffff0000; - w->size = (size | 0x0000ffff) + 1; - } - } - orion5x_mbus_dram_info.num_cs = cs; + orion_setup_cpu_mbus_target(&addr_map_cfg, &orion5x_mbus_dram_info, + ORION5X_DDR_WINDOW_CPU_BASE); } void __init orion5x_setup_dev_boot_win(u32 base, u32 size) { - setup_cpu_win(win_alloc_count++, base, size, - TARGET_DEV_BUS, ATTR_DEV_BOOT, -1); + orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size, + TARGET_DEV_BUS, ATTR_DEV_BOOT, -1); } void __init orion5x_setup_dev0_win(u32 base, u32 size) { - setup_cpu_win(win_alloc_count++, base, size, - TARGET_DEV_BUS, ATTR_DEV_CS0, -1); + orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size, + TARGET_DEV_BUS, ATTR_DEV_CS0, -1); } void __init orion5x_setup_dev1_win(u32 base, u32 size) { - setup_cpu_win(win_alloc_count++, base, size, - TARGET_DEV_BUS, ATTR_DEV_CS1, -1); + orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size, + TARGET_DEV_BUS, ATTR_DEV_CS1, -1); } void __init orion5x_setup_dev2_win(u32 base, u32 size) { - setup_cpu_win(win_alloc_count++, base, size, - TARGET_DEV_BUS, ATTR_DEV_CS2, -1); + orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size, + TARGET_DEV_BUS, ATTR_DEV_CS2, -1); } void __init orion5x_setup_pcie_wa_win(u32 base, u32 size) { - setup_cpu_win(win_alloc_count++, base, size, - TARGET_PCIE, ATTR_PCIE_WA, -1); + orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size, + TARGET_PCIE, ATTR_PCIE_WA, -1); } -int __init orion5x_setup_sram_win(void) +void __init orion5x_setup_sram_win(void) { - return setup_cpu_win(win_alloc_count++, ORION5X_SRAM_PHYS_BASE, - ORION5X_SRAM_SIZE, TARGET_SRAM, ATTR_SRAM, -1); + orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, + ORION5X_SRAM_PHYS_BASE, ORION5X_SRAM_SIZE, + TARGET_SRAM, ATTR_SRAM, -1); } diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 22ace0bf2f92..47ca0ee44a6a 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -169,12 +169,7 @@ void __init orion5x_xor_init(void) ****************************************************************************/ static void __init orion5x_crypto_init(void) { - int ret; - - ret = orion5x_setup_sram_win(); - if (ret) - return; - + orion5x_setup_sram_win(); orion_crypto_init(ORION5X_CRYPTO_PHYS_BASE, ORION5X_SRAM_PHYS_BASE, SZ_8K, IRQ_ORION5X_CESA); } diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 909489f4d23e..465e8a458bfb 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -27,7 +27,7 @@ void orion5x_setup_dev0_win(u32 base, u32 size); void orion5x_setup_dev1_win(u32 base, u32 size); void orion5x_setup_dev2_win(u32 base, u32 size); void orion5x_setup_pcie_wa_win(u32 base, u32 size); -int orion5x_setup_sram_win(void); +void orion5x_setup_sram_win(void); void orion5x_ehci0_init(void); void orion5x_ehci1_init(void); diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 0a28bbc76891..2745f5d95b3f 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -69,7 +69,7 @@ ******************************************************************************/ #define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000) - +#define ORION5X_DDR_WINDOW_CPU_BASE (ORION5X_DDR_VIRT_BASE | 0x1500) #define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000) #define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000) #define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x)) diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile index 95a5fc53b6db..c20ce0f5ce33 100644 --- a/arch/arm/plat-orion/Makefile +++ b/arch/arm/plat-orion/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := irq.o pcie.o time.o common.o mpp.o +obj-y := irq.o pcie.o time.o common.o mpp.o addr-map.o obj-m := obj-n := obj- := diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c new file mode 100644 index 000000000000..d3abb34a10aa --- /dev/null +++ b/arch/arm/plat-orion/addr-map.c @@ -0,0 +1,166 @@ +/* + * arch/arm/plat-orion/addr-map.c + * + * Address map functions for Marvell Orion based SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include + +/* + * DDR target is the same on all Orion platforms. + */ +#define TARGET_DDR 0 + +/* + * Helpers to get DDR bank info + */ +#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3)) +#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3)) + +/* + * CPU Address Decode Windows registers + */ +#define WIN_CTRL_OFF 0x0000 +#define WIN_BASE_OFF 0x0004 +#define WIN_REMAP_LO_OFF 0x0008 +#define WIN_REMAP_HI_OFF 0x000c + +/* + * Default implementation + */ +static void __init __iomem * +orion_win_cfg_base(const struct orion_addr_map_cfg *cfg, int win) +{ + return (void __iomem *)(cfg->bridge_virt_base + (win << 4)); +} + +/* + * Default implementation + */ +static int __init orion_cpu_win_can_remap(const struct orion_addr_map_cfg *cfg, + const int win) +{ + if (win < cfg->remappable_wins) + return 1; + + return 0; +} + +void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg, + const int win, const u32 base, + const u32 size, const u8 target, + const u8 attr, const int remap) +{ + void __iomem *addr = cfg->win_cfg_base(cfg, win); + u32 ctrl, base_high, remap_addr; + + if (win >= cfg->num_wins) { + printk(KERN_ERR "setup_cpu_win: trying to allocate window " + "%d when only %d allowed\n", win, cfg->num_wins); + } + + base_high = base & 0xffff0000; + ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1; + + writel(base_high, addr + WIN_BASE_OFF); + writel(ctrl, addr + WIN_CTRL_OFF); + if (cfg->cpu_win_can_remap(cfg, win)) { + if (remap < 0) + remap_addr = base; + else + remap_addr = remap; + writel(remap_addr & 0xffff0000, addr + WIN_REMAP_LO_OFF); + writel(0, addr + WIN_REMAP_HI_OFF); + } +} + +/* + * Configure a number of windows. + */ +static void __init orion_setup_cpu_wins(const struct orion_addr_map_cfg * cfg, + const struct orion_addr_map_info *info) +{ + while (info->win != -1) { + orion_setup_cpu_win(cfg, info->win, info->base, info->size, + info->target, info->attr, info->remap); + info++; + } +} + +static void __init orion_disable_wins(const struct orion_addr_map_cfg * cfg) +{ + void __iomem *addr; + int i; + + for (i = 0; i < cfg->num_wins; i++) { + addr = cfg->win_cfg_base(cfg, i); + + writel(0, addr + WIN_BASE_OFF); + writel(0, addr + WIN_CTRL_OFF); + if (cfg->cpu_win_can_remap(cfg, i)) { + writel(0, addr + WIN_REMAP_LO_OFF); + writel(0, addr + WIN_REMAP_HI_OFF); + } + } +} + +/* + * Disable, clear and configure windows. + */ +void __init orion_config_wins(struct orion_addr_map_cfg * cfg, + const struct orion_addr_map_info *info) +{ + if (!cfg->cpu_win_can_remap) + cfg->cpu_win_can_remap = orion_cpu_win_can_remap; + + if (!cfg->win_cfg_base) + cfg->win_cfg_base = orion_win_cfg_base; + + orion_disable_wins(cfg); + + if (info) + orion_setup_cpu_wins(cfg, info); +} + +/* + * Setup MBUS dram target info. + */ +void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg, + struct mbus_dram_target_info *info, + const u32 ddr_window_cpu_base) +{ + void __iomem *addr; + int i; + int cs; + + info->mbus_dram_target_id = TARGET_DDR; + + addr = (void __iomem *)ddr_window_cpu_base; + + for (i = 0, cs = 0; i < 4; i++) { + u32 base = readl(addr + DDR_BASE_CS_OFF(i)); + u32 size = readl(addr + DDR_SIZE_CS_OFF(i)); + + /* + * Chip select enabled? + */ + if (size & 1) { + struct mbus_dram_window *w; + + w = &info->cs[cs++]; + w->cs_index = i; + w->mbus_attr = 0xf & ~(1 << i); + w->base = base & 0xffff0000; + w->size = (size | 0x0000ffff) + 1; + } + } + info->num_cs = cs; +} diff --git a/arch/arm/plat-orion/include/plat/addr-map.h b/arch/arm/plat-orion/include/plat/addr-map.h new file mode 100644 index 000000000000..55e40f43f1e6 --- /dev/null +++ b/arch/arm/plat-orion/include/plat/addr-map.h @@ -0,0 +1,52 @@ +/* + * arch/arm/plat-orion/include/plat/addr-map.h + * + * Marvell Orion SoC address map handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_ADDR_MAP_H +#define __PLAT_ADDR_MAP_H + +struct orion_addr_map_cfg { + const int num_wins; /* Total number of windows */ + const int remappable_wins; + const u32 bridge_virt_base; + + /* If NULL, the default cpu_win_can_remap will be used, using + the value in remappable_wins */ + int (*cpu_win_can_remap) (const struct orion_addr_map_cfg *cfg, + const int win); + /* If NULL, the default win_cfg_base will be used, using the + value in bridge_virt_base */ + void __iomem *(*win_cfg_base) (const struct orion_addr_map_cfg *cfg, + const int win); +}; + +/* + * Information needed to setup one address mapping. + */ +struct orion_addr_map_info { + const int win; + const u32 base; + const u32 size; + const u8 target; + const u8 attr; + const int remap; +}; + +void __init orion_config_wins(struct orion_addr_map_cfg *cfg, + const struct orion_addr_map_info *info); + +void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg, + const int win, const u32 base, + const u32 size, const u8 target, + const u8 attr, const int remap); + +void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg, + struct mbus_dram_target_info *info, + const u32 ddr_window_cpu_base); +#endif -- cgit v1.2.3 From 45173d5ed4c9a397db31623bf6469efbd3a239cd Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 7 Dec 2011 21:48:06 +0100 Subject: ARM: Orion: mbus_dram_info consolidation Move the *_mbus_dram_info structure into the orion platform and call it orion_mbus_dram_info everywhere. Signed-off-by: Andrew Lunn Tested-by: Michael Walle Acked-by: Nicolas Pitre Signed-off-by: Nicolas Pitre --- arch/arm/mach-dove/addr-map.c | 8 +++----- arch/arm/mach-dove/common.c | 11 ++++++----- arch/arm/mach-dove/common.h | 1 - arch/arm/mach-dove/pcie.c | 3 ++- arch/arm/mach-kirkwood/addr-map.c | 5 +---- arch/arm/mach-kirkwood/common.c | 15 ++++++++------- arch/arm/mach-kirkwood/common.h | 1 - arch/arm/mach-kirkwood/pcie.c | 3 ++- arch/arm/mach-mv78xx0/addr-map.c | 4 ---- arch/arm/mach-mv78xx0/common.c | 17 +++++++++-------- arch/arm/mach-mv78xx0/common.h | 1 - arch/arm/mach-mv78xx0/pcie.c | 3 ++- arch/arm/mach-orion5x/addr-map.c | 4 +--- arch/arm/mach-orion5x/common.c | 11 ++++++----- arch/arm/mach-orion5x/common.h | 1 - arch/arm/mach-orion5x/pci.c | 5 +++-- arch/arm/plat-orion/addr-map.c | 9 +++++---- arch/arm/plat-orion/include/plat/addr-map.h | 3 ++- 18 files changed, 50 insertions(+), 55 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-dove/addr-map.c b/arch/arm/mach-dove/addr-map.c index 1584726088e4..98b8c83b09ab 100644 --- a/arch/arm/mach-dove/addr-map.c +++ b/arch/arm/mach-dove/addr-map.c @@ -35,8 +35,6 @@ #define ATTR_PCIE_MEM 0xe8 #define ATTR_SCRATCHPAD 0x0 -struct mbus_dram_target_info dove_mbus_dram_info; - static inline void __iomem *ddr_map_sc(int i) { return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4)); @@ -102,7 +100,7 @@ void __init dove_setup_cpu_mbus(void) /* * Setup MBUS dram target info. */ - dove_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; + orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; for (i = 0, cs = 0; i < 2; i++) { u32 map = readl(ddr_map_sc(i)); @@ -113,7 +111,7 @@ void __init dove_setup_cpu_mbus(void) if (map & 1) { struct mbus_dram_window *w; - w = &dove_mbus_dram_info.cs[cs++]; + w = &orion_mbus_dram_info.cs[cs++]; w->cs_index = i; w->mbus_attr = 0; /* CS address decoding done inside */ /* the DDR controller, no need to */ @@ -122,5 +120,5 @@ void __init dove_setup_cpu_mbus(void) w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4); } } - dove_mbus_dram_info.num_cs = cs; + orion_mbus_dram_info.num_cs = cs; } diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index a9e0dae86a26..29c1881c8acb 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -30,6 +30,7 @@ #include #include #include +#include #include "common.h" static int get_tclk(void); @@ -71,7 +72,7 @@ void __init dove_map_io(void) ****************************************************************************/ void __init dove_ehci0_init(void) { - orion_ehci_init(&dove_mbus_dram_info, + orion_ehci_init(&orion_mbus_dram_info, DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0); } @@ -80,7 +81,7 @@ void __init dove_ehci0_init(void) ****************************************************************************/ void __init dove_ehci1_init(void) { - orion_ehci_1_init(&dove_mbus_dram_info, + orion_ehci_1_init(&orion_mbus_dram_info, DOVE_USB1_PHYS_BASE, IRQ_DOVE_USB1); } @@ -89,7 +90,7 @@ void __init dove_ehci1_init(void) ****************************************************************************/ void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data) { - orion_ge00_init(eth_data, &dove_mbus_dram_info, + orion_ge00_init(eth_data, &orion_mbus_dram_info, DOVE_GE00_PHYS_BASE, IRQ_DOVE_GE00_SUM, 0, get_tclk()); } @@ -107,7 +108,7 @@ void __init dove_rtc_init(void) ****************************************************************************/ void __init dove_sata_init(struct mv_sata_platform_data *sata_data) { - orion_sata_init(sata_data, &dove_mbus_dram_info, + orion_sata_init(sata_data, &orion_mbus_dram_info, DOVE_SATA_PHYS_BASE, IRQ_DOVE_SATA); } @@ -198,7 +199,7 @@ struct sys_timer dove_timer = { ****************************************************************************/ void __init dove_xor0_init(void) { - orion_xor0_init(&dove_mbus_dram_info, + orion_xor0_init(&orion_mbus_dram_info, DOVE_XOR0_PHYS_BASE, DOVE_XOR0_HIGH_PHYS_BASE, IRQ_DOVE_XOR_00, IRQ_DOVE_XOR_01); } diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h index 6a2046e44706..7322371d3908 100644 --- a/arch/arm/mach-dove/common.h +++ b/arch/arm/mach-dove/common.h @@ -15,7 +15,6 @@ struct mv643xx_eth_platform_data; struct mv_sata_platform_data; extern struct sys_timer dove_timer; -extern struct mbus_dram_target_info dove_mbus_dram_info; /* * Basic Dove init functions used early by machine-setup. diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c index aa2b3a09a51d..42e7d22a00f5 100644 --- a/arch/arm/mach-dove/pcie.c +++ b/arch/arm/mach-dove/pcie.c @@ -19,6 +19,7 @@ #include #include #include +#include #include "common.h" struct pcie_port { @@ -50,7 +51,7 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys) */ orion_pcie_set_local_bus_nr(pp->base, sys->busnr); - orion_pcie_setup(pp->base, &dove_mbus_dram_info); + orion_pcie_setup(pp->base, &orion_mbus_dram_info); /* * IORESOURCE_IO diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c index 935392f7e13f..e9a7180863d9 100644 --- a/arch/arm/mach-kirkwood/addr-map.c +++ b/arch/arm/mach-kirkwood/addr-map.c @@ -35,8 +35,6 @@ #define ATTR_PCIE1_MEM 0xd8 #define ATTR_SRAM 0x01 -struct mbus_dram_target_info kirkwood_mbus_dram_info; - /* * Description of the windows needed by the platform code */ @@ -88,6 +86,5 @@ void __init kirkwood_setup_cpu_mbus(void) /* * Setup MBUS dram target info. */ - orion_setup_cpu_mbus_target(&addr_map_cfg, &kirkwood_mbus_dram_info, - DDR_WINDOW_CPU_BASE); + orion_setup_cpu_mbus_target(&addr_map_cfg, DDR_WINDOW_CPU_BASE); } diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index b9632ee57b06..dd63fac9ed02 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -30,6 +30,7 @@ #include #include #include +#include #include "common.h" /***************************************************************************** @@ -73,7 +74,7 @@ unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED; void __init kirkwood_ehci_init(void) { kirkwood_clk_ctrl |= CGC_USB0; - orion_ehci_init(&kirkwood_mbus_dram_info, + orion_ehci_init(&orion_mbus_dram_info, USB_PHYS_BASE, IRQ_KIRKWOOD_USB); } @@ -85,7 +86,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) { kirkwood_clk_ctrl |= CGC_GE0; - orion_ge00_init(eth_data, &kirkwood_mbus_dram_info, + orion_ge00_init(eth_data, &orion_mbus_dram_info, GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, IRQ_KIRKWOOD_GE00_ERR, kirkwood_tclk); } @@ -99,7 +100,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) kirkwood_clk_ctrl |= CGC_GE1; - orion_ge01_init(eth_data, &kirkwood_mbus_dram_info, + orion_ge01_init(eth_data, &orion_mbus_dram_info, GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, IRQ_KIRKWOOD_GE01_ERR, kirkwood_tclk); } @@ -178,7 +179,7 @@ void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data) if (sata_data->n_ports > 1) kirkwood_clk_ctrl |= CGC_SATA1; - orion_sata_init(sata_data, &kirkwood_mbus_dram_info, + orion_sata_init(sata_data, &orion_mbus_dram_info, SATA_PHYS_BASE, IRQ_KIRKWOOD_SATA); } @@ -221,7 +222,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data) mvsdio_data->clock = 100000000; else mvsdio_data->clock = 200000000; - mvsdio_data->dram = &kirkwood_mbus_dram_info; + mvsdio_data->dram = &orion_mbus_dram_info; kirkwood_clk_ctrl |= CGC_SDIO; kirkwood_sdio.dev.platform_data = mvsdio_data; platform_device_register(&kirkwood_sdio); @@ -285,7 +286,7 @@ static void __init kirkwood_xor0_init(void) { kirkwood_clk_ctrl |= CGC_XOR0; - orion_xor0_init(&kirkwood_mbus_dram_info, + orion_xor0_init(&orion_mbus_dram_info, XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE, IRQ_KIRKWOOD_XOR_00, IRQ_KIRKWOOD_XOR_01); } @@ -364,7 +365,7 @@ static struct resource kirkwood_i2s_resources[] = { }; static struct kirkwood_asoc_platform_data kirkwood_i2s_data = { - .dram = &kirkwood_mbus_dram_info, + .dram = &orion_mbus_dram_info, .burst = 128, }; diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index b9b0f0968a36..4756b945106b 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -30,7 +30,6 @@ void kirkwood_init(void); void kirkwood_init_early(void); void kirkwood_init_irq(void); -extern struct mbus_dram_target_info kirkwood_mbus_dram_info; void kirkwood_setup_cpu_mbus(void); void kirkwood_enable_pcie(void); diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 74b992d810ea..8def894f3296 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -17,6 +17,7 @@ #include #include #include +#include #include "common.h" void kirkwood_enable_pcie(void) @@ -208,7 +209,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) */ orion_pcie_set_local_bus_nr(pp->base, sys->busnr); - orion_pcie_setup(pp->base, &kirkwood_mbus_dram_info); + orion_pcie_setup(pp->base, &orion_mbus_dram_info); return 1; } diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index 6b14555e5766..62b53d710efd 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -37,8 +37,6 @@ #define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4)) #define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4)) -struct mbus_dram_target_info mv78xx0_mbus_dram_info; - static void __init __iomem *win_cfg_base(int win) { /* @@ -73,11 +71,9 @@ void __init mv78xx0_setup_cpu_mbus(void) */ if (mv78xx0_core_index() == 0) orion_setup_cpu_mbus_target(&addr_map_cfg, - &mv78xx0_mbus_dram_info, DDR_WINDOW_CPU0_BASE); else orion_setup_cpu_mbus_target(&addr_map_cfg, - &mv78xx0_mbus_dram_info, DDR_WINDOW_CPU1_BASE); } diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 23d3980ef59d..be0c232ea0d8 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -23,6 +23,7 @@ #include #include #include +#include #include "common.h" static int get_tclk(void); @@ -169,7 +170,7 @@ void __init mv78xx0_map_io(void) ****************************************************************************/ void __init mv78xx0_ehci0_init(void) { - orion_ehci_init(&mv78xx0_mbus_dram_info, + orion_ehci_init(&orion_mbus_dram_info, USB0_PHYS_BASE, IRQ_MV78XX0_USB_0); } @@ -179,7 +180,7 @@ void __init mv78xx0_ehci0_init(void) ****************************************************************************/ void __init mv78xx0_ehci1_init(void) { - orion_ehci_1_init(&mv78xx0_mbus_dram_info, + orion_ehci_1_init(&orion_mbus_dram_info, USB1_PHYS_BASE, IRQ_MV78XX0_USB_1); } @@ -189,7 +190,7 @@ void __init mv78xx0_ehci1_init(void) ****************************************************************************/ void __init mv78xx0_ehci2_init(void) { - orion_ehci_2_init(&mv78xx0_mbus_dram_info, + orion_ehci_2_init(&orion_mbus_dram_info, USB2_PHYS_BASE, IRQ_MV78XX0_USB_2); } @@ -199,7 +200,7 @@ void __init mv78xx0_ehci2_init(void) ****************************************************************************/ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) { - orion_ge00_init(eth_data, &mv78xx0_mbus_dram_info, + orion_ge00_init(eth_data, &orion_mbus_dram_info, GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM, IRQ_MV78XX0_GE_ERR, get_tclk()); } @@ -210,7 +211,7 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) ****************************************************************************/ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) { - orion_ge01_init(eth_data, &mv78xx0_mbus_dram_info, + orion_ge01_init(eth_data, &orion_mbus_dram_info, GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM, NO_IRQ, get_tclk()); } @@ -234,7 +235,7 @@ void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data) eth_data->duplex = DUPLEX_FULL; } - orion_ge10_init(eth_data, &mv78xx0_mbus_dram_info, + orion_ge10_init(eth_data, &orion_mbus_dram_info, GE10_PHYS_BASE, IRQ_MV78XX0_GE10_SUM, NO_IRQ, get_tclk()); } @@ -258,7 +259,7 @@ void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data) eth_data->duplex = DUPLEX_FULL; } - orion_ge11_init(eth_data, &mv78xx0_mbus_dram_info, + orion_ge11_init(eth_data, &orion_mbus_dram_info, GE11_PHYS_BASE, IRQ_MV78XX0_GE11_SUM, NO_IRQ, get_tclk()); } @@ -277,7 +278,7 @@ void __init mv78xx0_i2c_init(void) ****************************************************************************/ void __init mv78xx0_sata_init(struct mv_sata_platform_data *sata_data) { - orion_sata_init(sata_data, &mv78xx0_mbus_dram_info, + orion_sata_init(sata_data, &orion_mbus_dram_info, SATA_PHYS_BASE, IRQ_MV78XX0_SATA); } diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h index 632e63d65e7a..f2ca59c75c6f 100644 --- a/arch/arm/mach-mv78xx0/common.h +++ b/arch/arm/mach-mv78xx0/common.h @@ -23,7 +23,6 @@ void mv78xx0_init(void); void mv78xx0_init_early(void); void mv78xx0_init_irq(void); -extern struct mbus_dram_target_info mv78xx0_mbus_dram_info; void mv78xx0_setup_cpu_mbus(void); void mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size, int maj, int min); diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index c51af1cac300..9208667c478a 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -15,6 +15,7 @@ #include #include #include +#include #include "common.h" struct pcie_port { @@ -153,7 +154,7 @@ static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys) * Generic PCIe unit setup. */ orion_pcie_set_local_bus_nr(pp->base, sys->busnr); - orion_pcie_setup(pp->base, &mv78xx0_mbus_dram_info); + orion_pcie_setup(pp->base, &orion_mbus_dram_info); sys->resource[0] = &pp->res[0]; sys->resource[1] = &pp->res[1]; diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index 73ceb49de894..3638e5c12b7e 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -56,7 +56,6 @@ #define ATTR_DEV_BOOT 0xf #define ATTR_SRAM 0x0 -struct mbus_dram_target_info orion5x_mbus_dram_info; static int __initdata win_alloc_count; static int __init cpu_win_can_remap(const struct orion_addr_map_cfg *cfg, @@ -114,8 +113,7 @@ void __init orion5x_setup_cpu_mbus_bridge(void) /* * Setup MBUS dram target info. */ - orion_setup_cpu_mbus_target(&addr_map_cfg, &orion5x_mbus_dram_info, - ORION5X_DDR_WINDOW_CPU_BASE); + orion_setup_cpu_mbus_target(&addr_map_cfg, ORION5X_DDR_WINDOW_CPU_BASE); } void __init orion5x_setup_dev_boot_win(u32 base, u32 size) diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 47ca0ee44a6a..acac255f9a1b 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -31,6 +31,7 @@ #include #include #include +#include #include "common.h" /***************************************************************************** @@ -71,7 +72,7 @@ void __init orion5x_map_io(void) ****************************************************************************/ void __init orion5x_ehci0_init(void) { - orion_ehci_init(&orion5x_mbus_dram_info, + orion_ehci_init(&orion_mbus_dram_info, ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL); } @@ -81,7 +82,7 @@ void __init orion5x_ehci0_init(void) ****************************************************************************/ void __init orion5x_ehci1_init(void) { - orion_ehci_1_init(&orion5x_mbus_dram_info, + orion_ehci_1_init(&orion_mbus_dram_info, ORION5X_USB1_PHYS_BASE, IRQ_ORION5X_USB1_CTRL); } @@ -91,7 +92,7 @@ void __init orion5x_ehci1_init(void) ****************************************************************************/ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) { - orion_ge00_init(eth_data, &orion5x_mbus_dram_info, + orion_ge00_init(eth_data, &orion_mbus_dram_info, ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM, IRQ_ORION5X_ETH_ERR, orion5x_tclk); } @@ -121,7 +122,7 @@ void __init orion5x_i2c_init(void) ****************************************************************************/ void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data) { - orion_sata_init(sata_data, &orion5x_mbus_dram_info, + orion_sata_init(sata_data, &orion_mbus_dram_info, ORION5X_SATA_PHYS_BASE, IRQ_ORION5X_SATA); } @@ -158,7 +159,7 @@ void __init orion5x_uart1_init(void) ****************************************************************************/ void __init orion5x_xor_init(void) { - orion_xor0_init(&orion5x_mbus_dram_info, + orion_xor0_init(&orion_mbus_dram_info, ORION5X_XOR_PHYS_BASE, ORION5X_XOR_PHYS_BASE + 0x200, IRQ_ORION5X_XOR0, IRQ_ORION5X_XOR1); diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 465e8a458bfb..889d80c7a151 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -20,7 +20,6 @@ extern struct sys_timer orion5x_timer; * functions to map its interfaces and by the machine-setup to map its on- * board devices. Details in /mach-orion/addr-map.c */ -extern struct mbus_dram_target_info orion5x_mbus_dram_info; void orion5x_setup_cpu_mbus_bridge(void); void orion5x_setup_dev_boot_win(u32 base, u32 size); void orion5x_setup_dev0_win(u32 base, u32 size); diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index bc4a920e26ee..ddfa01acdaaa 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "common.h" /***************************************************************************** @@ -145,7 +146,7 @@ static int __init pcie_setup(struct pci_sys_data *sys) /* * Generic PCIe unit setup. */ - orion_pcie_setup(PCIE_BASE, &orion5x_mbus_dram_info); + orion_pcie_setup(PCIE_BASE, &orion_mbus_dram_info); /* * Check whether to apply Orion-1/Orion-NAS PCIe config @@ -477,7 +478,7 @@ static int __init pci_setup(struct pci_sys_data *sys) /* * Point PCI unit MBUS decode windows to DRAM space. */ - orion5x_setup_pci_wins(&orion5x_mbus_dram_info); + orion5x_setup_pci_wins(&orion_mbus_dram_info); /* * Master + Slave enable diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c index d3abb34a10aa..c27ad88bc400 100644 --- a/arch/arm/plat-orion/addr-map.c +++ b/arch/arm/plat-orion/addr-map.c @@ -14,6 +14,8 @@ #include #include +struct mbus_dram_target_info orion_mbus_dram_info; + /* * DDR target is the same on all Orion platforms. */ @@ -134,14 +136,13 @@ void __init orion_config_wins(struct orion_addr_map_cfg * cfg, * Setup MBUS dram target info. */ void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg, - struct mbus_dram_target_info *info, const u32 ddr_window_cpu_base) { void __iomem *addr; int i; int cs; - info->mbus_dram_target_id = TARGET_DDR; + orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; addr = (void __iomem *)ddr_window_cpu_base; @@ -155,12 +156,12 @@ void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg, if (size & 1) { struct mbus_dram_window *w; - w = &info->cs[cs++]; + w = &orion_mbus_dram_info.cs[cs++]; w->cs_index = i; w->mbus_attr = 0xf & ~(1 << i); w->base = base & 0xffff0000; w->size = (size | 0x0000ffff) + 1; } } - info->num_cs = cs; + orion_mbus_dram_info.num_cs = cs; } diff --git a/arch/arm/plat-orion/include/plat/addr-map.h b/arch/arm/plat-orion/include/plat/addr-map.h index 55e40f43f1e6..fd556f77562c 100644 --- a/arch/arm/plat-orion/include/plat/addr-map.h +++ b/arch/arm/plat-orion/include/plat/addr-map.h @@ -11,6 +11,8 @@ #ifndef __PLAT_ADDR_MAP_H #define __PLAT_ADDR_MAP_H +extern struct mbus_dram_target_info orion_mbus_dram_info; + struct orion_addr_map_cfg { const int num_wins; /* Total number of windows */ const int remappable_wins; @@ -47,6 +49,5 @@ void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg, const u8 attr, const int remap); void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg, - struct mbus_dram_target_info *info, const u32 ddr_window_cpu_base); #endif -- cgit v1.2.3 From 63a9332b232bdab0df6ef18a9f39e8d58a82bda4 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 7 Dec 2011 21:48:07 +0100 Subject: ARM: Orion: Get address map from plat-orion instead of via platform_data Use an getter function in plat-orion/addr-map.c to get the address map structure, rather than pass it to drivers in the platform_data structures. When the drivers are built for none orion platforms, a dummy function is provided instead which returns NULL. Signed-off-by: Andrew Lunn Tested-by: Michael Walle Acked-by: Nicolas Pitre Signed-off-by: Nicolas Pitre --- arch/arm/mach-dove/pcie.c | 3 +-- arch/arm/mach-kirkwood/mpp.c | 1 - arch/arm/mach-kirkwood/pcie.c | 3 +-- arch/arm/mach-mv78xx0/mpp.c | 1 - arch/arm/mach-mv78xx0/pcie.c | 3 +-- arch/arm/mach-orion5x/mpp.c | 1 - arch/arm/mach-orion5x/pci.c | 2 +- arch/arm/plat-orion/addr-map.c | 7 +++++++ arch/arm/plat-orion/include/plat/pcie.h | 3 +-- arch/arm/plat-orion/pcie.c | 6 +++--- 10 files changed, 15 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c index 42e7d22a00f5..6c11a4df7178 100644 --- a/arch/arm/mach-dove/pcie.c +++ b/arch/arm/mach-dove/pcie.c @@ -10,7 +10,6 @@ #include #include -#include #include