From 612f9d338a6060f814ef35b7108b43407a5df423 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 9 Sep 2008 14:43:39 -0500 Subject: powerpc: Fix interrupt values for DMA2 in MPC8610 HPCD device tree For Freescale 8xxx devices that use an MPIC, the interrupt numbers in the device tree must be 16 greater than the values documented in the reference manual. In these chips, the MPIC is wired to use the first 16 numbers for external interrupts, but the documentation numbers internal interrupts from 0. In the MPC8610 HPCD device tree, the interrupt properties for the DMA channels for DMA2 were not the adjusted values. This fixes that. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/mpc8610_hpcd.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index 3b3a1062cb25..584a4f184eb2 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -281,7 +281,7 @@ cell-index = <0>; reg = <0x0 0x80>; interrupt-parent = <&mpic>; - interrupts = <60 2>; + interrupts = <76 2>; }; dma-channel@1 { compatible = "fsl,mpc8610-dma-channel", @@ -289,7 +289,7 @@ cell-index = <1>; reg = <0x80 0x80>; interrupt-parent = <&mpic>; - interrupts = <61 2>; + interrupts = <77 2>; }; dma-channel@2 { compatible = "fsl,mpc8610-dma-channel", @@ -297,7 +297,7 @@ cell-index = <2>; reg = <0x100 0x80>; interrupt-parent = <&mpic>; - interrupts = <62 2>; + interrupts = <78 2>; }; dma-channel@3 { compatible = "fsl,mpc8610-dma-channel", @@ -305,7 +305,7 @@ cell-index = <3>; reg = <0x180 0x80>; interrupt-parent = <&mpic>; - interrupts = <63 2>; + interrupts = <79 2>; }; }; -- cgit v1.2.3