From 3c1d36da1d5ed36979340efd233ddaacc45b0a02 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 14 Aug 2007 15:12:56 -0400 Subject: ACPI: thermal: clean up MODULE_PARM_DESC newlines Reported-by: Randy Dunlap Signed-off-by: Len Brown --- drivers/acpi/thermal.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/acpi') diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 1e06159fd9c4..9b31f36481d2 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -77,23 +77,23 @@ MODULE_LICENSE("GPL"); static int act; module_param(act, int, 0644); -MODULE_PARM_DESC(act, "Disable or override all lowest active trip points.\n"); +MODULE_PARM_DESC(act, "Disable or override all lowest active trip points."); static int tzp; module_param(tzp, int, 0444); -MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds.\n"); +MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds."); static int nocrt; module_param(nocrt, int, 0); -MODULE_PARM_DESC(nocrt, "Set to disable action on ACPI thermal zone critical and hot trips.\n"); +MODULE_PARM_DESC(nocrt, "Set to disable action on ACPI thermal zone critical and hot trips."); static int off; module_param(off, int, 0); -MODULE_PARM_DESC(off, "Set to disable ACPI thermal support.\n"); +MODULE_PARM_DESC(off, "Set to disable ACPI thermal support."); static int psv; module_param(psv, int, 0644); -MODULE_PARM_DESC(psv, "Disable or override all passive trip points.\n"); +MODULE_PARM_DESC(psv, "Disable or override all passive trip points."); static int acpi_thermal_add(struct acpi_device *device); static int acpi_thermal_remove(struct acpi_device *device, int type); -- cgit v1.2.3 From c52a7419af18594426bc601d1ea346dbbcf71e28 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 14 Aug 2007 15:49:32 -0400 Subject: ACPI: thermal: create "thermal.crt=C" bootparam Some hardware will malfunction at a temperature below the BIOS provided critical shutdown threshold. This hook allows moving the critical trip points down to a temperature which provokes a graceful shutdown before the hardware malfunction. http://bugzilla.kernel.org/show_bug.cgi?id=8884 WARNING: A trip-point override will not get noticed until the system delivers a temperature change event, or unless thermal zone polling is enabled. eg. "thermal.tzp=10" Signed-off-by: Len Brown --- drivers/acpi/thermal.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers/acpi') diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 9b31f36481d2..4c420feba207 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -79,6 +79,10 @@ static int act; module_param(act, int, 0644); MODULE_PARM_DESC(act, "Disable or override all lowest active trip points."); +static int crt; +module_param(crt, int, 0644); +MODULE_PARM_DESC(crt, "Disable or lower all critical trip points."); + static int tzp; module_param(tzp, int, 0444); MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds."); @@ -340,6 +344,20 @@ static int acpi_thermal_get_trip_points(struct acpi_thermal *tz) tz->trips.critical.temperature)); } + if (tz->trips.critical.flags.valid == 1) { + if (crt == -1) { + tz->trips.critical.flags.valid = 0; + } else if (crt > 0) { + unsigned long crt_k = CELSIUS_TO_KELVIN(crt); + + /* + * Allow override to lower critical threshold + */ + if (crt_k < tz->trips.critical.temperature) + tz->trips.critical.temperature = crt_k; + } + } + /* Critical Sleep (optional) */ status = -- cgit v1.2.3 From 8c99fdce30787b0d1fc00b907d4cd55a714e4cdd Mon Sep 17 00:00:00 2001 From: Len Brown Date: Mon, 20 Aug 2007 18:46:50 -0400 Subject: ACPI: thermal: set "thermal.nocrt" via DMI on Gigabyte GA-7ZX This system BIOS sets a critical temperature to 65C, which is too low. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=155496 Signed-off-by: Len Brown --- drivers/acpi/thermal.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) (limited to 'drivers/acpi') diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 4c420feba207..39479b0befa4 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -89,7 +89,7 @@ MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds."); static int nocrt; module_param(nocrt, int, 0); -MODULE_PARM_DESC(nocrt, "Set to disable action on ACPI thermal zone critical and hot trips."); +MODULE_PARM_DESC(nocrt, "Set to take no action upon ACPI thermal zone critical trips points."); static int off; module_param(off, int, 0); @@ -1357,6 +1357,13 @@ static int thermal_act(struct dmi_system_id *d) { } return 0; } +static int thermal_nocrt(struct dmi_system_id *d) { + + printk(KERN_NOTICE "ACPI: %s detected: " + "disabling all critical thermal trip point actions.\n", d->ident); + nocrt = 1; + return 0; +} static int thermal_tzp(struct dmi_system_id *d) { if (tzp == 0) { @@ -1405,6 +1412,14 @@ static struct dmi_system_id thermal_dmi_table[] __initdata = { DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"), }, }, + { + .callback = thermal_nocrt, + .ident = "Gigabyte GA-7ZX", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."), + DMI_MATCH(DMI_BOARD_NAME, "7ZX"), + }, + }, {} }; #endif /* CONFIG_DMI */ -- cgit v1.2.3 From 2db9ccba8d4bb8e3aa6d0cd8e7544c5736963bbc Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Fri, 24 Aug 2007 11:45:50 +0200 Subject: ACPI: /proc/acpi/thermal_zone trip points are now read-only, mark them as such Signed-off-by: Pavel Machek Signed-off-by: Len Brown --- drivers/acpi/thermal.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/acpi') diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 39479b0befa4..7e8f48b7f9af 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -1085,9 +1085,9 @@ static int acpi_thermal_add_fs(struct acpi_device *device) entry->owner = THIS_MODULE; } - /* 'trip_points' [R/W] */ + /* 'trip_points' [R] */ entry = create_proc_entry(ACPI_THERMAL_FILE_TRIP_POINTS, - S_IFREG | S_IRUGO | S_IWUSR, + S_IRUGO, acpi_device_dir(device)); if (!entry) return -ENODEV; -- cgit v1.2.3