From 203ef6c456ad70e660cca67921d3d872b13aa516 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 16 Jul 2007 14:29:40 +0900 Subject: ahci: implement SCR_NOTIFICATION r/w Make ahci_scr_read/write() handle SCR_NOTIFICATION if the controller supports it. Also, print "sntf" in the cap line if supported. While at it, convert eight space into a tab in ahci_print_info(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 68 +++++++++++++++++++++++++++++------------------------- 1 file changed, 37 insertions(+), 31 deletions(-) (limited to 'drivers/ata/ahci.c') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 9475e5619af1..de8bffbf4bd3 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -99,6 +99,7 @@ enum { HOST_CAP_SSC = (1 << 14), /* Slumber capable */ HOST_CAP_CLO = (1 << 24), /* Command List Override support */ HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */ + HOST_CAP_SNTF = (1 << 29), /* SNotification register */ HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */ HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ @@ -113,11 +114,11 @@ enum { PORT_TFDATA = 0x20, /* taskfile data */ PORT_SIG = 0x24, /* device TF signature */ PORT_CMD_ISSUE = 0x38, /* command issue */ - PORT_SCR = 0x28, /* SATA phy register block */ PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */ PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */ PORT_SCR_ERR = 0x30, /* SATA phy register: SError */ PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */ + PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */ /* PORT_IRQ_{STAT,MASK} bits */ PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */ @@ -631,39 +632,45 @@ static void ahci_restore_initial_config(struct ata_host *host) (void) readl(mmio + HOST_PORTS_IMPL); /* flush */ } -static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val) +static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg) { - unsigned int sc_reg; - - switch (sc_reg_in) { - case SCR_STATUS: sc_reg = 0; break; - case SCR_CONTROL: sc_reg = 1; break; - case SCR_ERROR: sc_reg = 2; break; - case SCR_ACTIVE: sc_reg = 3; break; - default: - return -EINVAL; - } + static const int offset[] = { + [SCR_STATUS] = PORT_SCR_STAT, + [SCR_CONTROL] = PORT_SCR_CTL, + [SCR_ERROR] = PORT_SCR_ERR, + [SCR_ACTIVE] = PORT_SCR_ACT, + [SCR_NOTIFICATION] = PORT_SCR_NTF, + }; + struct ahci_host_priv *hpriv = ap->host->private_data; - *val = readl(ap->ioaddr.scr_addr + (sc_reg * 4)); + if (sc_reg < ARRAY_SIZE(offset) && + (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF))) + return offset[sc_reg]; return 0; } - -static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) +static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val) { - unsigned int sc_reg; - - switch (sc_reg_in) { - case SCR_STATUS: sc_reg = 0; break; - case SCR_CONTROL: sc_reg = 1; break; - case SCR_ERROR: sc_reg = 2; break; - case SCR_ACTIVE: sc_reg = 3; break; - default: - return -EINVAL; + void __iomem *port_mmio = ahci_port_base(ap); + int offset = ahci_scr_offset(ap, sc_reg); + + if (offset) { + *val = readl(port_mmio + offset); + return 0; } + return -EINVAL; +} - writel(val, ap->ioaddr.scr_addr + (sc_reg * 4)); - return 0; +static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val) +{ + void __iomem *port_mmio = ahci_port_base(ap); + int offset = ahci_scr_offset(ap, sc_reg); + + if (offset) { + writel(val, port_mmio + offset); + return 0; + } + return -EINVAL; } static void ahci_start_engine(struct ata_port *ap) @@ -1768,12 +1775,13 @@ static void ahci_print_info(struct ata_host *host) dev_printk(KERN_INFO, &pdev->dev, "flags: " - "%s%s%s%s%s%s" - "%s%s%s%s%s%s%s\n" + "%s%s%s%s%s%s%s" + "%s%s%s%s%s%s%s\n" , cap & (1 << 31) ? "64bit " : "", cap & (1 << 30) ? "ncq " : "", + cap & (1 << 29) ? "sntf " : "", cap & (1 << 28) ? "ilck " : "", cap & (1 << 27) ? "stag " : "", cap & (1 << 26) ? "pm " : "", @@ -1842,10 +1850,8 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) void __iomem *port_mmio = ahci_port_base(ap); /* standard SATA port setup */ - if (hpriv->port_map & (1 << i)) { + if (hpriv->port_map & (1 << i)) ap->ioaddr.cmd_addr = port_mmio; - ap->ioaddr.scr_addr = port_mmio + PORT_SCR; - } /* disabled/not-implemented port */ else -- cgit v1.2.3