From b7ae128d728c42583dac9db48dce9a44bc0fb900 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Fri, 5 Jun 2015 19:49:26 +0200 Subject: ahci: Add support for Cavium's ThunderX host controller This patch adds support for Cavium's ThunderX host controller. The controller resides on the SoC and is a AHCI compatible SATA controller with one port, compliant with Serial ATA 3.1 and AHCI Revision 1.31. There can exists multiple SATA controllers on the SoC. The controller depends on MSI-X support since the PCI ECAM controller on the SoC does not implement MSI nor lagacy intx interrupt support. Thus, during device initialization, if MSI fails MSI-X will be used to enable the device's interrupts. The controller uses non-standard BAR0 for its register range. The already existing device lookup (vendor and device id) that is already implemented for other host controllers is used to change the PCI BAR. Signed-off-by: Robert Richter Signed-off-by: Tejun Heo --- drivers/ata/ahci.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/ata/ahci.c') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 77a34fc04138..bdedaa4f9d7b 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -53,6 +53,7 @@ enum { AHCI_PCI_BAR_STA2X11 = 0, + AHCI_PCI_BAR_CAVIUM = 0, AHCI_PCI_BAR_ENMOTUS = 2, AHCI_PCI_BAR_STANDARD = 5, }; @@ -1374,11 +1375,13 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) dev_info(&pdev->dev, "PDC42819 can only drive SATA devices with this driver\n"); - /* Both Connext and Enmotus devices use non-standard BARs */ + /* Some devices use non-standard BARs */ if (pdev->vendor == PCI_VENDOR_ID_STMICRO && pdev->device == 0xCC06) ahci_pci_bar = AHCI_PCI_BAR_STA2X11; else if (pdev->vendor == 0x1c44 && pdev->device == 0x8000) ahci_pci_bar = AHCI_PCI_BAR_ENMOTUS; + else if (pdev->vendor == 0x177d && pdev->device == 0xa01c) + ahci_pci_bar = AHCI_PCI_BAR_CAVIUM; /* * The JMicron chip 361/363 contains one SATA controller and one -- cgit v1.2.3