From 0ee7261c9212dbaf72d510e37f6c5b849d1847f0 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Fri, 14 Sep 2012 14:50:34 +0530 Subject: drivers: bus: Move the OMAP interconnect driver to drivers/bus/ OMAP interconnect drivers are used for the interconnect error handling. Since they are bus driver, lets move it to newly created drivers/bus. Tested-by: Lokesh Vutla Signed-off-by: Santosh Shilimkar Acked-by: Tony Lindgren Signed-off-by: Arnd Bergmann --- drivers/bus/Kconfig | 6 + drivers/bus/Makefile | 3 + drivers/bus/omap_l3_noc.c | 266 ++++++++++++++++++++++++++++++++++++ drivers/bus/omap_l3_noc.h | 176 ++++++++++++++++++++++++ drivers/bus/omap_l3_smx.c | 297 ++++++++++++++++++++++++++++++++++++++++ drivers/bus/omap_l3_smx.h | 338 ++++++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 1086 insertions(+) create mode 100644 drivers/bus/omap_l3_noc.c create mode 100644 drivers/bus/omap_l3_noc.h create mode 100644 drivers/bus/omap_l3_smx.c create mode 100644 drivers/bus/omap_l3_smx.h (limited to 'drivers/bus') diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index 6270415107d0..bbec35d21fe5 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -12,4 +12,10 @@ config OMAP_OCP2SCP OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via OCP2SCP. +config OMAP_INTERCONNECT + tristate "OMAP INTERCONNECT DRIVER" + depends on ARCH_OMAP2PLUS + + help + Driver to enable OMAP interconnect error handling driver. endmenu diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index 0ec50bc43d7c..45d997c85453 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -3,3 +3,6 @@ # obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o + +# Interconnect bus driver for OMAP SoCs. +obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c new file mode 100644 index 000000000000..d15225ff5c49 --- /dev/null +++ b/drivers/bus/omap_l3_noc.c @@ -0,0 +1,266 @@ +/* + * OMAP4XXX L3 Interconnect error handling driver + * + * Copyright (C) 2011 Texas Corporation + * Santosh Shilimkar + * Sricharan + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ +#include +#include +#include +#include +#include +#include +#include + +#include "omap_l3_noc.h" + +/* + * Interrupt Handler for L3 error detection. + * 1) Identify the L3 clockdomain partition to which the error belongs to. + * 2) Identify the slave where the error information is logged + * 3) Print the logged information. + * 4) Add dump stack to provide kernel trace. + * + * Two Types of errors : + * 1) Custom errors in L3 : + * Target like DMM/FW/EMIF generates SRESP=ERR error + * 2) Standard L3 error: + * - Unsupported CMD. + * L3 tries to access target while it is idle + * - OCP disconnect. + * - Address hole error: + * If DSS/ISS/FDIF/USBHOSTFS access a target where they + * do not have connectivity, the error is logged in + * their default target which is DMM2. + * + * On High Secure devices, firewall errors are possible and those + * can be trapped as well. But the trapping is implemented as part + * secure software and hence need not be implemented here. + */ +static irqreturn_t l3_interrupt_handler(int irq, void *_l3) +{ + + struct omap4_l3 *l3 = _l3; + int inttype, i, k; + int err_src = 0; + u32 std_err_main, err_reg, clear, masterid; + void __iomem *base, *l3_targ_base; + char *target_name, *master_name = "UN IDENTIFIED"; + + /* Get the Type of interrupt */ + inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR; + + for (i = 0; i < L3_MODULES; i++) { + /* + * Read the regerr register of the clock domain + * to determine the source + */ + base = l3->l3_base[i]; + err_reg = __raw_readl(base + l3_flagmux[i] + + + L3_FLAGMUX_REGERR0 + (inttype << 3)); + + /* Get the corresponding error and analyse */ + if (err_reg) { + /* Identify the source from control status register */ + err_src = __ffs(err_reg); + + /* Read the stderrlog_main_source from clk domain */ + l3_targ_base = base + *(l3_targ[i] + err_src); + std_err_main = __raw_readl(l3_targ_base + + L3_TARG_STDERRLOG_MAIN); + masterid = __raw_readl(l3_targ_base + + L3_TARG_STDERRLOG_MSTADDR); + + switch (std_err_main & CUSTOM_ERROR) { + case STANDARD_ERROR: + target_name = + l3_targ_inst_name[i][err_src]; + WARN(true, "L3 standard error: TARGET:%s at address 0x%x\n", + target_name, + __raw_readl(l3_targ_base + + L3_TARG_STDERRLOG_SLVOFSLSB)); + /* clear the std error log*/ + clear = std_err_main | CLEAR_STDERR_LOG; + writel(clear, l3_targ_base + + L3_TARG_STDERRLOG_MAIN); + break; + + case CUSTOM_ERROR: + target_name = + l3_targ_inst_name[i][err_src]; + for (k = 0; k < NUM_OF_L3_MASTERS; k++) { + if (masterid == l3_masters[k].id) + master_name = + l3_masters[k].name; + } + WARN(true, "L3 custom error: MASTER:%s TARGET:%s\n", + master_name, target_name); + /* clear the std error log*/ + clear = std_err_main | CLEAR_STDERR_LOG; + writel(clear, l3_targ_base + + L3_TARG_STDERRLOG_MAIN); + break; + + default: + /* Nothing to be handled here as of now */ + break; + } + /* Error found so break the for loop */ + break; + } + } + return IRQ_HANDLED; +} + +static int __devinit omap4_l3_probe(struct platform_device *pdev) +{ + static struct omap4_l3 *l3; + struct resource *res; + int ret; + + l3 = kzalloc(sizeof(*l3), GFP_KERNEL); + if (!l3) + return -ENOMEM; + + platform_set_drvdata(pdev, l3); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "couldn't find resource 0\n"); + ret = -ENODEV; + goto err0; + } + + l3->l3_base[0] = ioremap(res->start, resource_size(res)); + if (!l3->l3_base[0]) { + dev_err(&pdev->dev, "ioremap failed\n"); + ret = -ENOMEM; + goto err0; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_err(&pdev->dev, "couldn't find resource 1\n"); + ret = -ENODEV; + goto err1; + } + + l3->l3_base[1] = ioremap(res->start, resource_size(res)); + if (!l3->l3_base[1]) { + dev_err(&pdev->dev, "ioremap failed\n"); + ret = -ENOMEM; + goto err1; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 2); + if (!res) { + dev_err(&pdev->dev, "couldn't find resource 2\n"); + ret = -ENODEV; + goto err2; + } + + l3->l3_base[2] = ioremap(res->start, resource_size(res)); + if (!l3->l3_base[2]) { + dev_err(&pdev->dev, "ioremap failed\n"); + ret = -ENOMEM; + goto err2; + } + + /* + * Setup interrupt Handlers + */ + l3->debug_irq = platform_get_irq(pdev, 0); + ret = request_irq(l3->debug_irq, + l3_interrupt_handler, + IRQF_DISABLED, "l3-dbg-irq", l3); + if (ret) { + pr_crit("L3: request_irq failed to register for 0x%x\n", + OMAP44XX_IRQ_L3_DBG); + goto err3; + } + + l3->app_irq = platform_get_irq(pdev, 1); + ret = request_irq(l3->app_irq, + l3_interrupt_handler, + IRQF_DISABLED, "l3-app-irq", l3); + if (ret) { + pr_crit("L3: request_irq failed to register for 0x%x\n", + OMAP44XX_IRQ_L3_APP); + goto err4; + } + + return 0; + +err4: + free_irq(l3->debug_irq, l3); +err3: + iounmap(l3->l3_base[2]); +err2: + iounmap(l3->l3_base[1]); +err1: + iounmap(l3->l3_base[0]); +err0: + kfree(l3); + return ret; +} + +static int __devexit omap4_l3_remove(struct platform_device *pdev) +{ + struct omap4_l3 *l3 = platform_get_drvdata(pdev); + + free_irq(l3->app_irq, l3); + free_irq(l3->debug_irq, l3); + iounmap(l3->l3_base[0]); + iounmap(l3->l3_base[1]); + iounmap(l3->l3_base[2]); + kfree(l3); + + return 0; +} + +#if defined(CONFIG_OF) +static const struct of_device_id l3_noc_match[] = { + {.compatible = "ti,omap4-l3-noc", }, + {}, +}; +MODULE_DEVICE_TABLE(of, l3_noc_match); +#else +#define l3_noc_match NULL +#endif + +static struct platform_driver omap4_l3_driver = { + .probe = omap4_l3_probe, + .remove = __devexit_p(omap4_l3_remove), + .driver = { + .name = "omap_l3_noc", + .owner = THIS_MODULE, + .of_match_table = l3_noc_match, + }, +}; + +static int __init omap4_l3_init(void) +{ + return platform_driver_register(&omap4_l3_driver); +} +postcore_initcall_sync(omap4_l3_init); + +static void __exit omap4_l3_exit(void) +{ + platform_driver_unregister(&omap4_l3_driver); +} +module_exit(omap4_l3_exit); diff --git a/drivers/bus/omap_l3_noc.h b/drivers/bus/omap_l3_noc.h new file mode 100644 index 000000000000..a6ce34dc4814 --- /dev/null +++ b/drivers/bus/omap_l3_noc.h @@ -0,0 +1,176 @@ +/* + * OMAP4XXX L3 Interconnect error handling driver header + * + * Copyright (C) 2011 Texas Corporation + * Santosh Shilimkar + * sricharan + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ +#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H +#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H + +#define L3_MODULES 3 +#define CLEAR_STDERR_LOG (1 << 31) +#define CUSTOM_ERROR 0x2 +#define STANDARD_ERROR 0x0 +#define INBAND_ERROR 0x0 +#define L3_APPLICATION_ERROR 0x0 +#define L3_DEBUG_ERROR 0x1 + +/* L3 TARG register offsets */ +#define L3_TARG_STDERRLOG_MAIN 0x48 +#define L3_TARG_STDERRLOG_SLVOFSLSB 0x5c +#define L3_TARG_STDERRLOG_MSTADDR 0x68 +#define L3_FLAGMUX_REGERR0 0xc + +#define NUM_OF_L3_MASTERS (sizeof(l3_masters)/sizeof(l3_masters[0])) + +static u32 l3_flagmux[L3_MODULES] = { + 0x500, + 0x1000, + 0X0200 +}; + +/* L3 Target standard Error register offsets */ +static u32 l3_targ_inst_clk1[] = { + 0x100, /* DMM1 */ + 0x200, /* DMM2 */ + 0x300, /* ABE */ + 0x400, /* L4CFG */ + 0x600, /* CLK2 PWR DISC */ + 0x0, /* Host CLK1 */ + 0x900 /* L4 Wakeup */ +}; + +static u32 l3_targ_inst_clk2[] = { + 0x500, /* CORTEX M3 */ + 0x300, /* DSS */ + 0x100, /* GPMC */ + 0x400, /* ISS */ + 0x700, /* IVAHD */ + 0xD00, /* missing in TRM corresponds to AES1*/ + 0x900, /* L4 PER0*/ + 0x200, /* OCMRAM */ + 0x100, /* missing in TRM corresponds to GPMC sERROR*/ + 0x600, /* SGX */ + 0x800, /* SL2 */ + 0x1600, /* C2C */ + 0x1100, /* missing in TRM corresponds PWR DISC CLK1*/ + 0xF00, /* missing in TRM corrsponds to SHA1*/ + 0xE00, /* missing in TRM corresponds to AES2*/ + 0xC00, /* L4 PER3 */ + 0xA00, /* L4 PER1*/ + 0xB00, /* L4 PER2*/ + 0x0, /* HOST CLK2 */ + 0x1800, /* CAL */ + 0x1700 /* LLI */ +}; + +static u32 l3_targ_inst_clk3[] = { + 0x0100 /* EMUSS */, + 0x0300, /* DEBUGSS_CT_TBR */ + 0x0 /* HOST CLK3 */ +}; + +static struct l3_masters_data { + u32 id; + char name[10]; +} l3_masters[] = { + { 0x0 , "MPU"}, + { 0x10, "CS_ADP"}, + { 0x14, "xxx"}, + { 0x20, "DSP"}, + { 0x30, "IVAHD"}, + { 0x40, "ISS"}, + { 0x44, "DucatiM3"}, + { 0x48, "FaceDetect"}, + { 0x50, "SDMA_Rd"}, + { 0x54, "SDMA_Wr"}, + { 0x58, "xxx"}, + { 0x5C, "xxx"}, + { 0x60, "SGX"}, + { 0x70, "DSS"}, + { 0x80, "C2C"}, + { 0x88, "xxx"}, + { 0x8C, "xxx"}, + { 0x90, "HSI"}, + { 0xA0, "MMC1"}, + { 0xA4, "MMC2"}, + { 0xA8, "MMC6"}, + { 0xB0, "UNIPRO1"}, + { 0xC0, "USBHOSTHS"}, + { 0xC4, "USBOTGHS"}, + { 0xC8, "USBHOSTFS"} +}; + +static char *l3_targ_inst_name[L3_MODULES][21] = { + { + "DMM1", + "DMM2", + "ABE", + "L4CFG", + "CLK2 PWR DISC", + "HOST CLK1", + "L4 WAKEUP" + }, + { + "CORTEX M3" , + "DSS ", + "GPMC ", + "ISS ", + "IVAHD ", + "AES1", + "L4 PER0", + "OCMRAM ", + "GPMC sERROR", + "SGX ", + "SL2 ", + "C2C ", + "PWR DISC CLK1", + "SHA1", + "AES2", + "L4 PER3", + "L4 PER1", + "L4 PER2", + "HOST CLK2", + "CAL", + "LLI" + }, + { + "EMUSS", + "DEBUG SOURCE", + "HOST CLK3" + }, +}; + +static u32 *l3_targ[L3_MODULES] = { + l3_targ_inst_clk1, + l3_targ_inst_clk2, + l3_targ_inst_clk3, +}; + +struct omap4_l3 { + struct device *dev; + struct clk *ick; + + /* memory base */ + void __iomem *l3_base[L3_MODULES]; + + int debug_irq; + int app_irq; +}; +#endif diff --git a/drivers/bus/omap_l3_smx.c b/drivers/bus/omap_l3_smx.c new file mode 100644 index 000000000000..acc216491b8a --- /dev/null +++ b/drivers/bus/omap_l3_smx.c @@ -0,0 +1,297 @@ +/* + * OMAP3XXX L3 Interconnect Driver + * + * Copyright (C) 2011 Texas Corporation + * Felipe Balbi + * Santosh Shilimkar + * Sricharan + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include +#include +#include +#include +#include +#include "omap_l3_smx.h" + +static inline u64 omap3_l3_readll(void __iomem *base, u16 reg) +{ + return __raw_readll(base + reg); +} + +static inline void omap3_l3_writell(void __iomem *base, u16 reg, u64 value) +{ + __raw_writell(value, base + reg); +} + +static inline enum omap3_l3_code omap3_l3_decode_error_code(u64 error) +{ + return (error & 0x0f000000) >> L3_ERROR_LOG_CODE; +} + +static inline u32 omap3_l3_decode_addr(u64 error_addr) +{ + return error_addr & 0xffffffff; +} + +static inline unsigned omap3_l3_decode_cmd(u64 error) +{ + return (error & 0x07) >> L3_ERROR_LOG_CMD; +} + +static inline enum omap3_l3_initiator_id omap3_l3_decode_initid(u64 error) +{ + return (error & 0xff00) >> L3_ERROR_LOG_INITID; +} + +static inline unsigned omap3_l3_decode_req_info(u64 error) +{ + return (error >> 32) & 0xffff; +} + +static char *omap3_l3_code_string(u8 code) +{ + switch (code) { + case OMAP_L3_CODE_NOERROR: + return "No Error"; + case OMAP_L3_CODE_UNSUP_CMD: + return "Unsupported Command"; + case OMAP_L3_CODE_ADDR_HOLE: + return "Address Hole"; + case OMAP_L3_CODE_PROTECT_VIOLATION: + return "Protection Violation"; + case OMAP_L3_CODE_IN_BAND_ERR: + return "In-band Error"; + case OMAP_L3_CODE_REQ_TOUT_NOT_ACCEPT: + return "Request Timeout Not Accepted"; + case OMAP_L3_CODE_REQ_TOUT_NO_RESP: + return "Request Timeout, no response"; + default: + return "UNKNOWN error"; + } +} + +static char *omap3_l3_initiator_string(u8 initid) +{ + switch (initid) { + case OMAP_L3_LCD: + return "LCD"; + case OMAP_L3_SAD2D: + return "SAD2D"; + case OMAP_L3_IA_MPU_SS_1: + case OMAP_L3_IA_MPU_SS_2: + case OMAP_L3_IA_MPU_SS_3: + case OMAP_L3_IA_MPU_SS_4: + case OMAP_L3_IA_MPU_SS_5: + return "MPU"; + case OMAP_L3_IA_IVA_SS_1: + case OMAP_L3_IA_IVA_SS_2: + case OMAP_L3_IA_IVA_SS_3: + return "IVA_SS"; + case OMAP_L3_IA_IVA_SS_DMA_1: + case OMAP_L3_IA_IVA_SS_DMA_2: + case OMAP_L3_IA_IVA_SS_DMA_3: + case OMAP_L3_IA_IVA_SS_DMA_4: + case OMAP_L3_IA_IVA_SS_DMA_5: + case OMAP_L3_IA_IVA_SS_DMA_6: + return "IVA_SS_DMA"; + case OMAP_L3_IA_SGX: + return "SGX"; + case OMAP_L3_IA_CAM_1: + case OMAP_L3_IA_CAM_2: + case OMAP_L3_IA_CAM_3: + return "CAM"; + case OMAP_L3_IA_DAP: + return "DAP"; + case OMAP_L3_SDMA_WR_1: + case OMAP_L3_SDMA_WR_2: + return "SDMA_WR"; + case OMAP_L3_SDMA_RD_1: + case OMAP_L3_SDMA_RD_2: + case OMAP_L3_SDMA_RD_3: + case OMAP_L3_SDMA_RD_4: + return "SDMA_RD"; + case OMAP_L3_USBOTG: + return "USB_OTG"; + case OMAP_L3_USBHOST: + return "USB_HOST"; + default: + return "UNKNOWN Initiator"; + } +} + +/* + * omap3_l3_block_irq - handles a register block's irq + * @l3: struct omap3_l3 * + * @base: register block base address + * @error: L3_ERROR_LOG register of our block + * + * Called in hard-irq context. Caller should take care of locking + * + * OMAP36xx TRM gives, on page 2001, Figure 9-10, the Typical Error + * Analysis Sequence, we are following that sequence here, please + * refer to that Figure for more information on the subject. + */ +static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3, + u64 error, int error_addr) +{ + u8 code = omap3_l3_decode_error_code(error); + u8 initid = omap3_l3_decode_initid(error); + u8 multi = error & L3_ERROR_LOG_MULTI; + u32 address = omap3_l3_decode_addr(error_addr); + + pr_err("%s seen by %s %s at address %x\n", + omap3_l3_code_string(code), + omap3_l3_initiator_string(initid), + multi ? "Multiple Errors" : "", address); + WARN_ON(1); + + return IRQ_HANDLED; +} + +static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) +{ + struct omap3_l3 *l3 = _l3; + u64 status, clear; + u64 error; + u64 error_addr; + u64 err_source = 0; + void __iomem *base; + int int_type; + irqreturn_t ret = IRQ_NONE; + + int_type = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR; + if (!int_type) { + status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_0); + /* + * if we have a timeout error, there's nothing we can + * do besides rebooting the board. So let's BUG on any + * of such errors and handle the others. timeout error + * is severe and not expected to occur. + */ + BUG_ON(status & L3_STATUS_0_TIMEOUT_MASK); + } else { + status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_1); + /* No timeout error for debug sources */ + } + + /* identify the error source */ + err_source = __ffs(status); + + base = l3->rt + omap3_l3_bases[int_type][err_source]; + error = omap3_l3_readll(base, L3_ERROR_LOG); + if (error) { + error_addr = omap3_l3_readll(base, L3_ERROR_LOG_ADDR); + ret |= omap3_l3_block_irq(l3, error, error_addr); + } + + /* Clear the status register */ + clear = (L3_AGENT_STATUS_CLEAR_IA << int_type) | + L3_AGENT_STATUS_CLEAR_TA; + omap3_l3_writell(base, L3_AGENT_STATUS, clear); + + /* clear the error log register */ + omap3_l3_writell(base, L3_ERROR_LOG, error); + + return ret; +} + +static int __init omap3_l3_probe(struct platform_device *pdev) +{ + struct omap3_l3 *l3; + struct resource *res; + int ret; + + l3 = kzalloc(sizeof(*l3), GFP_KERNEL); + if (!l3) + return -ENOMEM; + + platform_set_drvdata(pdev, l3); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "couldn't find resource\n"); + ret = -ENODEV; + goto err0; + } + l3->rt = ioremap(res->start, resource_size(res)); + if (!l3->rt) { + dev_err(&pdev->dev, "ioremap failed\n"); + ret = -ENOMEM; + goto err0; + } + + l3->debug_irq = platform_get_irq(pdev, 0); + ret = request_irq(l3->debug_irq, omap3_l3_app_irq, + IRQF_DISABLED | IRQF_TRIGGER_RISING, + "l3-debug-irq", l3); + if (ret) { + dev_err(&pdev->dev, "couldn't request debug irq\n"); + goto err1; + } + + l3->app_irq = platform_get_irq(pdev, 1); + ret = request_irq(l3->app_irq, omap3_l3_app_irq, + IRQF_DISABLED | IRQF_TRIGGER_RISING, + "l3-app-irq", l3); + if (ret) { + dev_err(&pdev->dev, "couldn't request app irq\n"); + goto err2; + } + + return 0; + +err2: + free_irq(l3->debug_irq, l3); +err1: + iounmap(l3->rt); +err0: + kfree(l3); + return ret; +} + +static int __exit omap3_l3_remove(struct platform_device *pdev) +{ + struct omap3_l3 *l3 = platform_get_drvdata(pdev); + + free_irq(l3->app_irq, l3); + free_irq(l3->debug_irq, l3); + iounmap(l3->rt); + kfree(l3); + + return 0; +} + +static struct platform_driver omap3_l3_driver = { + .remove = __exit_p(omap3_l3_remove), + .driver = { + .name = "omap_l3_smx", + }, +}; + +static int __init omap3_l3_init(void) +{ + return platform_driver_probe(&omap3_l3_driver, omap3_l3_probe); +} +postcore_initcall_sync(omap3_l3_init); + +static void __exit omap3_l3_exit(void) +{ + platform_driver_unregister(&omap3_l3_driver); +} +module_exit(omap3_l3_exit); diff --git a/drivers/bus/omap_l3_smx.h b/drivers/bus/omap_l3_smx.h new file mode 100644 index 000000000000..4f3cebca4179 --- /dev/null +++ b/drivers/bus/omap_l3_smx.h @@ -0,0 +1,338 @@ +/* + * OMAP3XXX L3 Interconnect Driver header + * + * Copyright (C) 2011 Texas Corporation + * Felipe Balbi + * Santosh Shilimkar + * sricharan + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ +#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H +#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H + +/* Register definitions. All 64-bit wide */ +#define L3_COMPONENT 0x000 +#define L3_CORE 0x018 +#define L3_AGENT_CONTROL 0x020 +#define L3_AGENT_STATUS 0x028 +#define L3_ERROR_LOG 0x058 + +#define L3_ERROR_LOG_MULTI (1 << 31) +#define L3_ERROR_LOG_SECONDARY (1 << 30) + +#define L3_ERROR_LOG_ADDR 0x060 + +/* Register definitions for Sideband Interconnect */ +#define L3_SI_CONTROL 0x020 +#define L3_SI_FLAG_STATUS_0 0x510 + +static const u64 shift = 1; + +#define L3_STATUS_0_MPUIA_BRST (shift << 0) +#define L3_STATUS_0_MPUIA_RSP (shift << 1) +#define L3_STATUS_0_MPUIA_INBAND (shift << 2) +#define L3_STATUS_0_IVAIA_BRST (shift << 6) +#define L3_STATUS_0_IVAIA_RSP (shift << 7) +#define L3_STATUS_0_IVAIA_INBAND (shift << 8) +#define L3_STATUS_0_SGXIA_BRST (shift << 9) +#define L3_STATUS_0_SGXIA_RSP (shift << 10) +#define L3_STATUS_0_SGXIA_MERROR (shift << 11) +#define L3_STATUS_0_CAMIA_BRST (shift << 12) +#define L3_STATUS_0_CAMIA_RSP (shift << 13) +#define L3_STATUS_0_CAMIA_INBAND (shift << 14) +#define L3_STATUS_0_DISPIA_BRST (shift << 15) +#define L3_STATUS_0_DISPIA_RSP (shift << 16) +#define L3_STATUS_0_DMARDIA_BRST (shift << 18) +#define L3_STATUS_0_DMARDIA_RSP (shift << 19) +#define L3_STATUS_0_DMAWRIA_BRST (shift << 21) +#define L3_STATUS_0_DMAWRIA_RSP (shift << 22) +#define L3_STATUS_0_USBOTGIA_BRST (shift << 24) +#define L3_STATUS_0_USBOTGIA_RSP (shift << 25) +#define L3_STATUS_0_USBOTGIA_INBAND (shift << 26) +#define L3_STATUS_0_USBHOSTIA_BRST (shift << 27) +#define L3_STATUS_0_USBHOSTIA_INBAND (shift << 28) +#define L3_STATUS_0_SMSTA_REQ (shift << 48) +#define L3_STATUS_0_GPMCTA_REQ (shift << 49) +#define L3_STATUS_0_OCMRAMTA_REQ (shift << 50) +#define L3_STATUS_0_OCMROMTA_REQ (shift << 51) +#define L3_STATUS_0_IVATA_REQ (shift << 54) +#define L3_STATUS_0_SGXTA_REQ (shift << 55) +#define L3_STATUS_0_SGXTA_SERROR (shift << 56) +#define L3_STATUS_0_GPMCTA_SERROR (shift << 57) +#define L3_STATUS_0_L4CORETA_REQ (shift << 58) +#define L3_STATUS_0_L4PERTA_REQ (shift << 59) +#define L3_STATUS_0_L4EMUTA_REQ (shift << 60) +#define L3_STATUS_0_MAD2DTA_REQ (shift << 61) + +#define L3_STATUS_0_TIMEOUT_MASK (L3_STATUS_0_MPUIA_BRST \ + | L3_STATUS_0_MPUIA_RSP \ + | L3_STATUS_0_IVAIA_BRST \ + | L3_STATUS_0_IVAIA_RSP \ + | L3_STATUS_0_SGXIA_BRST \ + | L3_STATUS_0_SGXIA_RSP \ + | L3_STATUS_0_CAMIA_BRST \ + | L3_STATUS_0_CAMIA_RSP \ + | L3_STATUS_0_DISPIA_BRST \ + | L3_STATUS_0_DISPIA_RSP \ + | L3_STATUS_0_DMARDIA_BRST \ + | L3_STATUS_0_DMARDIA_RSP \ + | L3_STATUS_0_DMAWRIA_BRST \ + | L3_STATUS_0_DMAWRIA_RSP \ + | L3_STATUS_0_USBOTGIA_BRST \ + | L3_STATUS_0_USBOTGIA_RSP \ + | L3_STATUS_0_USBHOSTIA_BRST \ + | L3_STATUS_0_SMSTA_REQ \ + | L3_STATUS_0_GPMCTA_REQ \ + | L3_STATUS_0_OCMRAMTA_REQ \ + | L3_STATUS_0_OCMROMTA_REQ \ + | L3_STATUS_0_IVATA_REQ \ + | L3_STATUS_0_SGXTA_REQ \ + | L3_STATUS_0_L4CORETA_REQ \ + | L3_STATUS_0_L4PERTA_REQ \ + | L3_STATUS_0_L4EMUTA_REQ \ + | L3_STATUS_0_MAD2DTA_REQ) + +#define L3_SI_FLAG_STATUS_1 0x530 + +#define L3_STATUS_1_MPU_DATAIA (1 << 0) +#define L3_STATUS_1_DAPIA0 (1 << 3) +#define L3_STATUS_1_DAPIA1 (1 << 4) +#define L3_STATUS_1_IVAIA (1 << 6) + +#define L3_PM_ERROR_LOG 0x020 +#define L3_PM_CONTROL 0x028 +#define L3_PM_ERROR_CLEAR_SINGLE 0x030 +#define L3_PM_ERROR_CLEAR_MULTI 0x038 +#define L3_PM_REQ_INFO_PERMISSION(n) (0x048 + (0x020 * n)) +#define L3_PM_READ_PERMISSION(n) (0x050 + (0x020 * n)) +#define L3_PM_WRITE_PERMISSION(n) (0x058 + (0x020 * n)) +#define L3_PM_ADDR_MATCH(n) (0x060 + (0x020 * n)) + +/* L3 error log bit fields. Common for IA and TA */ +#define L3_ERROR_LOG_CODE 24 +#define L3_ERROR_LOG_INITID 8 +#define L3_ERROR_LOG_CMD 0 + +/* L3 agent status bit fields. */ +#define L3_AGENT_STATUS_CLEAR_IA 0x10000000 +#define L3_AGENT_STATUS_CLEAR_TA 0x01000000 + +#define OMAP34xx_IRQ_L3_APP 10 +#define L3_APPLICATION_ERROR 0x0 +#define L3_DEBUG_ERROR 0x1 + +enum omap3_l3_initiator_id { + /* LCD has 1 ID */ + OMAP_L3_LCD = 29, + /* SAD2D has 1 ID */ + OMAP_L3_SAD2D = 28, + /* MPU has 5 IDs */ + OMAP_L3_IA_MPU_SS_1 = 27, + OMAP_L3_IA_MPU_SS_2 = 26, + OMAP_L3_IA_MPU_SS_3 = 25, + OMAP_L3_IA_MPU_SS_4 = 24, + OMAP_L3_IA_MPU_SS_5 = 23, + /* IVA2.2 SS has 3 IDs*/ + OMAP_L3_IA_IVA_SS_1 = 22, + OMAP_L3_IA_IVA_SS_2 = 21, + OMAP_L3_IA_IVA_SS_3 = 20, + /* IVA 2.2 SS DMA has 6 IDS */ + OMAP_L3_IA_IVA_SS_DMA_1 = 19, + OMAP_L3_IA_IVA_SS_DMA_2 = 18, + OMAP_L3_IA_IVA_SS_DMA_3 = 17, + OMAP_L3_IA_IVA_SS_DMA_4 = 16, + OMAP_L3_IA_IVA_SS_DMA_5 = 15, + OMAP_L3_IA_IVA_SS_DMA_6 = 14, + /* SGX has 1 ID */ + OMAP_L3_IA_SGX = 13, + /* CAM has 3 ID */ + OMAP_L3_IA_CAM_1 = 12, + OMAP_L3_IA_CAM_2 = 11, + OMAP_L3_IA_CAM_3 = 10, + /* DAP has 1 ID */ + OMAP_L3_IA_DAP = 9, + /* SDMA WR has 2 IDs */ + OMAP_L3_SDMA_WR_1 = 8, + OMAP_L3_SDMA_WR_2 = 7, + /* SDMA RD has 4 IDs */ + OMAP_L3_SDMA_RD_1 = 6, + OMAP_L3_SDMA_RD_2 = 5, + OMAP_L3_SDMA_RD_3 = 4, + OMAP_L3_SDMA_RD_4 = 3, + /* HSUSB OTG has 1 ID */ + OMAP_L3_USBOTG = 2, + /* HSUSB HOST has 1 ID */ + OMAP_L3_USBHOST = 1, +}; + +enum omap3_l3_code { + OMAP_L3_CODE_NOERROR = 0, + OMAP_L3_CODE_UNSUP_CMD = 1, + OMAP_L3_CODE_ADDR_HOLE = 2, + OMAP_L3_CODE_PROTECT_VIOLATION = 3, + OMAP_L3_CODE_IN_BAND_ERR = 4, + /* codes 5 and 6 are reserved */ + OMAP_L3_CODE_REQ_TOUT_NOT_ACCEPT = 7, + OMAP_L3_CODE_REQ_TOUT_NO_RESP = 8, + /* codes 9 - 15 are also reserved */ +}; + +struct omap3_l3 { + struct device *dev; + struct clk *ick; + + /* memory base*/ + void __iomem *rt; + + int debug_irq; + int app_irq; + + /* true when and inband functional error occurs */ + unsigned inband:1; +}; + +/* offsets for l3 agents in order with the Flag status register */ +static unsigned int omap3_l3_app_bases[] = { + /* MPU IA */ + 0x1400, + 0x1400, + 0x1400, + /* RESERVED */ + 0, + 0, + 0, + /* IVA 2.2 IA */ + 0x1800, + 0x1800, + 0x1800, + /* SGX IA */ + 0x1c00, + 0x1c00, + /* RESERVED */ + 0, + /* CAMERA IA */ + 0x5800, + 0x5800, + 0x5800, + /* DISPLAY IA */ + 0x5400, + 0x5400, + /* RESERVED */ + 0, + /*SDMA RD IA */ + 0x4c00, + 0x4c00, + /* RESERVED */ + 0, + /* SDMA WR IA */ + 0x5000, + 0x5000, + /* RESERVED */ + 0, + /* USB OTG IA */ + 0x4400, + 0x4400, + 0x4400, + /* USB HOST IA */ + 0x4000, + 0x4000, + /* RESERVED */ + 0, + 0, + 0, + 0, + /* SAD2D IA */ + 0x3000, + 0x3000, + 0x3000, + /* RESERVED */ + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + /* SMA TA */ + 0x2000, + /* GPMC TA */ + 0x2400, + /* OCM RAM TA */ + 0x2800, + /* OCM ROM TA */ + 0x2C00, + /* L4 CORE TA */ + 0x6800, + /* L4 PER TA */ + 0x6c00, + /* IVA 2.2 TA */ + 0x6000, + /* SGX TA */ + 0x6400, + /* L4 EMU TA */ + 0x7000, + /* GPMC TA */ + 0x2400, + /* L4 CORE TA */ + 0x6800, + /* L4 PER TA */ + 0x6c00, + /* L4 EMU TA */ + 0x7000, + /* MAD2D TA */ + 0x3400, + /* RESERVED */ + 0, + 0, +}; + +static unsigned int omap3_l3_debug_bases[] = { + /* MPU DATA IA */ + 0x1400, + /* RESERVED */ + 0, + 0, + /* DAP IA */ + 0x5c00, + 0x5c00, + /* RESERVED */ + 0, + /* IVA 2.2 IA */ + 0x1800, + /* REST RESERVED */ +}; + +static u32 *omap3_l3_bases[] = { + omap3_l3_app_bases, + omap3_l3_debug_bases, +}; + +/* + * REVISIT define __raw_readll/__raw_writell here, but move them to + * at some point + */ +#define __raw_writell(v, a) (__chk_io_ptr(a), \ + *(volatile u64 __force *)(a) = (v)) +#define __raw_readll(a) (__chk_io_ptr(a), \ + *(volatile u64 __force *)(a)) + +#endif -- cgit v1.2.3