From 1b5d1a58a51324b1b6c851abec3bf40bd539cbb2 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 24 Sep 2017 18:19:19 +0200 Subject: clk: clk-gpio: Request GPIO descriptor as LOW Requesting the GPIOD_OUT_LOW low will make sure the GPIO is deasserted when requested. The gpiolib core will make sure that if the GPIO line is active low, it will be logically driven high when deasserted, see drivers/gpiolib.c gpiod_configure_flags(). Cc: Sergej Sawazki Cc: Jyri Sarha Signed-off-by: Linus Walleij Signed-off-by: Stephen Boyd --- drivers/clk/clk-gpio.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) (limited to 'drivers/clk') diff --git a/drivers/clk/clk-gpio.c b/drivers/clk/clk-gpio.c index 9d057073e110..151513c655c3 100644 --- a/drivers/clk/clk-gpio.c +++ b/drivers/clk/clk-gpio.c @@ -109,14 +109,6 @@ static struct clk_hw *clk_register_gpio(struct device *dev, const char *name, if (!clk_gpio) return ERR_PTR(-ENOMEM); - /* - * Set to disabled no matter what: NOTE if the GPIO line is active low - * the GPIO descriptor knows this and will set it high to deassert the - * line. This assumes the GPIO descriptor has been requested using - * GPIOD_ASIS by the callers so we need to initialize it as disabled here. - */ - gpiod_set_value(gpiod, 0); - init.name = name; init.ops = clk_gpio_ops; init.flags = flags | CLK_IS_BASIC; @@ -237,7 +229,7 @@ static int gpio_clk_driver_probe(struct platform_device *pdev) is_mux = of_device_is_compatible(node, "gpio-mux-clock"); gpio_name = is_mux ? "select" : "enable"; - gpiod = devm_gpiod_get(&pdev->dev, gpio_name, GPIOD_ASIS); + gpiod = devm_gpiod_get(&pdev->dev, gpio_name, GPIOD_OUT_LOW); if (IS_ERR(gpiod)) { ret = PTR_ERR(gpiod); if (ret == -EPROBE_DEFER) -- cgit v1.2.3