From 800d683e6b8f0ba630470a56b61ff6742ad129ad Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 16 May 2012 11:33:31 +0100 Subject: dmaengine: PL08x: ignore 'direction' argument in dma_slave_config Ignore the direction argument in dma_slave_config, and configure both directions independently. We still check that the configuration for the intended direction is valid; this check will eventually be dropped. This check is just for debugging at present. Acked-by: Linus Walleij Tested-by: Linus Walleij Signed-off-by: Russell King --- drivers/dma/amba-pl08x.c | 56 ++++++++++++++++-------------------------------- 1 file changed, 18 insertions(+), 38 deletions(-) (limited to 'drivers/dma/amba-pl08x.c') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index fde801f787cd..50b9a839e9c3 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -218,8 +218,6 @@ enum pl08x_dma_chan_state { * @name: name of channel * @cd: channel platform data * @runtime_addr: address for RX/TX according to the runtime config - * @runtime_direction: current direction of this channel according to - * runtime config * @pend_list: queued transactions pending on this channel * @at: active transaction on this channel * @lock: a lock for this channel data @@ -239,7 +237,6 @@ struct pl08x_dma_chan { struct dma_slave_config cfg; u32 src_cctl; u32 dst_cctl; - enum dma_transfer_direction runtime_direction; struct list_head pend_list; struct pl08x_txd *at; spinlock_t lock; @@ -1239,50 +1236,31 @@ static int dma_set_runtime_config(struct dma_chan *chan, { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); struct pl08x_driver_data *pl08x = plchan->host; - enum dma_slave_buswidth addr_width; - u32 maxburst, cctl = 0; + u32 src_cctl, dst_cctl; if (!plchan->slave) return -EINVAL; - /* Transfer direction */ - plchan->runtime_direction = config->direction; - if (config->direction == DMA_MEM_TO_DEV) { - addr_width = config->dst_addr_width; - maxburst = config->dst_maxburst; - } else if (config->direction == DMA_DEV_TO_MEM) { - addr_width = config->src_addr_width; - maxburst = config->src_maxburst; - } else { + dst_cctl = pl08x_get_cctl(plchan, config->dst_addr_width, + config->dst_maxburst); + if (dst_cctl == ~0 && config->direction == DMA_MEM_TO_DEV) { dev_err(&pl08x->adev->dev, - "bad runtime_config: alien transfer direction\n"); + "bad runtime_config: alien address width (M2D)\n"); return -EINVAL; } - cctl = pl08x_get_cctl(plchan, addr_width, maxburst); - if (cctl == ~0) { + src_cctl = pl08x_get_cctl(plchan, config->src_addr_width, + config->src_maxburst); + if (src_cctl == ~0 && config->direction == DMA_DEV_TO_MEM) { dev_err(&pl08x->adev->dev, - "bad runtime_config: alien address width\n"); + "bad runtime_config: alien address width (D2M)\n"); return -EINVAL; } + plchan->dst_cctl = dst_cctl; + plchan->src_cctl = src_cctl; plchan->cfg = *config; - if (plchan->runtime_direction == DMA_DEV_TO_MEM) { - plchan->src_cctl = cctl; - } else { - plchan->dst_cctl = cctl; - } - - dev_dbg(&pl08x->adev->dev, - "configured channel %s (%s) for %s, data width %d, " - "maxburst %d words, LE, CCTL=0x%08x\n", - dma_chan_name(chan), plchan->name, - (config->direction == DMA_DEV_TO_MEM) ? "RX" : "TX", - addr_width, - maxburst, - cctl); - return 0; } @@ -1470,11 +1448,6 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( return NULL; } - if (direction != plchan->runtime_direction) - dev_err(&pl08x->adev->dev, "%s DMA setup does not match " - "the direction configured for the PrimeCell\n", - __func__); - /* * Set up addresses, the PrimeCell configured address * will take precedence since this may configure the @@ -1499,6 +1472,13 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( return NULL; } + if (cctl == ~0) { + pl08x_free_txd(pl08x, txd); + dev_err(&pl08x->adev->dev, + "DMA slave configuration botched?\n"); + return NULL; + } + txd->cctl = cctl | pl08x_select_bus(src_buses, dst_buses); if (plchan->cfg.device_fc) -- cgit v1.2.3