From 8d7849db3eab7f560deba145dfed3cd4df97c975 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Tue, 29 Apr 2014 13:35:46 +0300 Subject: drm/i915: Make sprite updates atomic MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add a mechanism by which we can evade the leading edge of vblank. This guarantees that no two sprite register writes will straddle on either side of the vblank start, and that means all the writes will be latched together in one atomic operation. We do the vblank evade by checking the scanline counter, and if it's too close to the start of vblank (too close has been hardcoded to 100usec for now), we will wait for the vblank start to pass. In order to eliminate random delayes from the rest of the system, we operate with interrupts disabled, except when waiting for the vblank obviously. Note that we now go digging through pipe_to_crtc_mapping[] in the vblank interrupt handler, which is a bit dangerous since we set up interrupts before the crtcs. However in this case since it's the vblank interrupt, we don't actually unmask it until some piece of code requests it. v2: preempt_check_resched() calls after local_irq_enable() (Jesse) Hook up the vblank irq stuff on BDW as well v3: Pass intel_crtc instead of drm_crtc (Daniel) Warn if crtc.mutex isn't locked (Daniel) Add an explicit compiler barrier and document the barriers (Daniel) Note the irq vs. modeset setup madness in the commit message (Daniel) v4: Use prepare_to_wait() & co. directly and eliminate vbl_received v5: Refactor intel_pipe_handle_vblank() vs. drm_handle_vblank() (Chris) Check for min/max scanline <= 0 (Chris) Don't call intel_pipe_update_end() if start failed totally (Chris) Check that the vblank counters match on both sides of the critical section (Chris) v6: Fix atomic update for interlaced modes v7: Reorder code for better readability (Chris) v8: Drop preempt_check_resched(). It's not available to modules anymore and isn't even needed unless we ourselves cause a wakeup needing reschedule while interrupts are off Reviewed-by: Jesse Barnes Reviewed-by: Sourab Gupta Reviewed-by: Akash Goel Signed-off-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sprite.c | 131 ++++++++++++++++++++++++++++++++++++ 1 file changed, 131 insertions(+) (limited to 'drivers/gpu/drm/i915/intel_sprite.c') diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index 336ae6c602f2..a3ed840aadbe 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -37,6 +37,89 @@ #include #include "i915_drv.h" +static int usecs_to_scanlines(const struct drm_display_mode *mode, int usecs) +{ + /* paranoia */ + if (!mode->crtc_htotal) + return 1; + + return DIV_ROUND_UP(usecs * mode->crtc_clock, 1000 * mode->crtc_htotal); +} + +static bool intel_pipe_update_start(struct intel_crtc *crtc, uint32_t *start_vbl_count) +{ + struct drm_device *dev = crtc->base.dev; + const struct drm_display_mode *mode = &crtc->config.adjusted_mode; + enum pipe pipe = crtc->pipe; + long timeout = msecs_to_jiffies_timeout(1); + int scanline, min, max, vblank_start; + DEFINE_WAIT(wait); + + WARN_ON(!mutex_is_locked(&crtc->base.mutex)); + + vblank_start = mode->crtc_vblank_start; + if (mode->flags & DRM_MODE_FLAG_INTERLACE) + vblank_start = DIV_ROUND_UP(vblank_start, 2); + + /* FIXME needs to be calibrated sensibly */ + min = vblank_start - usecs_to_scanlines(mode, 100); + max = vblank_start - 1; + + if (min <= 0 || max <= 0) + return false; + + if (WARN_ON(drm_vblank_get(dev, pipe))) + return false; + + local_irq_disable(); + + for (;;) { + /* + * prepare_to_wait() has a memory barrier, which guarantees + * other CPUs can see the task state update by the time we + * read the scanline. + */ + prepare_to_wait(&crtc->vbl_wait, &wait, TASK_UNINTERRUPTIBLE); + + scanline = intel_get_crtc_scanline(crtc); + if (scanline < min || scanline > max) + break; + + if (timeout <= 0) { + DRM_ERROR("Potential atomic update failure on pipe %c\n", + pipe_name(crtc->pipe)); + break; + } + + local_irq_enable(); + + timeout = schedule_timeout(timeout); + + local_irq_disable(); + } + + finish_wait(&crtc->vbl_wait, &wait); + + drm_vblank_put(dev, pipe); + + *start_vbl_count = dev->driver->get_vblank_counter(dev, pipe); + + return true; +} + +static void intel_pipe_update_end(struct intel_crtc *crtc, u32 start_vbl_count) +{ + struct drm_device *dev = crtc->base.dev; + enum pipe pipe = crtc->pipe; + u32 end_vbl_count = dev->driver->get_vblank_counter(dev, pipe); + + local_irq_enable(); + + if (start_vbl_count != end_vbl_count) + DRM_ERROR("Atomic update failure on pipe %c (start=%u end=%u)\n", + pipe_name(pipe), start_vbl_count, end_vbl_count); +} + static void vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc, struct drm_framebuffer *fb, @@ -48,11 +131,14 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc, struct drm_device *dev = dplane->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_plane *intel_plane = to_intel_plane(dplane); + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_plane->pipe; int plane = intel_plane->plane; u32 sprctl; unsigned long sprsurf_offset, linear_offset; int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0); + u32 start_vbl_count; + bool atomic_update; sprctl = I915_READ(SPCNTR(pipe, plane)); @@ -131,6 +217,8 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc, fb->pitches[0]); linear_offset -= sprsurf_offset; + atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count); + I915_WRITE(SPSTRIDE(pipe, plane), fb->pitches[0]); I915_WRITE(SPPOS(pipe, plane), (crtc_y << 16) | crtc_x); @@ -144,6 +232,9 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc, I915_WRITE(SPSURF(pipe, plane), i915_gem_obj_ggtt_offset(obj) + sprsurf_offset); POSTING_READ(SPSURF(pipe, plane)); + + if (atomic_update) + intel_pipe_update_end(intel_crtc, start_vbl_count); } static void @@ -152,8 +243,13 @@ vlv_disable_plane(struct drm_plane *dplane, struct drm_crtc *crtc) struct drm_device *dev = dplane->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_plane *intel_plane = to_intel_plane(dplane); + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_plane->pipe; int plane = intel_plane->plane; + u32 start_vbl_count; + bool atomic_update; + + atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count); I915_WRITE(SPCNTR(pipe, plane), I915_READ(SPCNTR(pipe, plane)) & ~SP_ENABLE); @@ -161,6 +257,9 @@ vlv_disable_plane(struct drm_plane *dplane, struct drm_crtc *crtc) I915_WRITE(SPSURF(pipe, plane), 0); POSTING_READ(SPSURF(pipe, plane)); + if (atomic_update) + intel_pipe_update_end(intel_crtc, start_vbl_count); + intel_update_sprite_watermarks(dplane, crtc, 0, 0, false, false); } @@ -226,10 +325,13 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, struct drm_device *dev = plane->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_plane *intel_plane = to_intel_plane(plane); + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_plane->pipe; u32 sprctl, sprscale = 0; unsigned long sprsurf_offset, linear_offset; int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0); + u32 start_vbl_count; + bool atomic_update; sprctl = I915_READ(SPRCTL(pipe)); @@ -299,6 +401,8 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, pixel_size, fb->pitches[0]); linear_offset -= sprsurf_offset; + atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count); + I915_WRITE(SPRSTRIDE(pipe), fb->pitches[0]); I915_WRITE(SPRPOS(pipe), (crtc_y << 16) | crtc_x); @@ -318,6 +422,9 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, I915_WRITE(SPRSURF(pipe), i915_gem_obj_ggtt_offset(obj) + sprsurf_offset); POSTING_READ(SPRSURF(pipe)); + + if (atomic_update) + intel_pipe_update_end(intel_crtc, start_vbl_count); } static void @@ -326,7 +433,12 @@ ivb_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc) struct drm_device *dev = plane->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_plane *intel_plane = to_intel_plane(plane); + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_plane->pipe; + u32 start_vbl_count; + bool atomic_update; + + atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count); I915_WRITE(SPRCTL(pipe), I915_READ(SPRCTL(pipe)) & ~SPRITE_ENABLE); /* Can't leave the scaler enabled... */ @@ -336,6 +448,9 @@ ivb_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc) I915_WRITE(SPRSURF(pipe), 0); POSTING_READ(SPRSURF(pipe)); + if (atomic_update) + intel_pipe_update_end(intel_crtc, start_vbl_count); + /* * Avoid underruns when disabling the sprite. * FIXME remove once watermark updates are done properly. @@ -410,10 +525,13 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, struct drm_device *dev = plane->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_plane *intel_plane = to_intel_plane(plane); + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_plane->pipe; unsigned long dvssurf_offset, linear_offset; u32 dvscntr, dvsscale; int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0); + u32 start_vbl_count; + bool atomic_update; dvscntr = I915_READ(DVSCNTR(pipe)); @@ -478,6 +596,8 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, pixel_size, fb->pitches[0]); linear_offset -= dvssurf_offset; + atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count); + I915_WRITE(DVSSTRIDE(pipe), fb->pitches[0]); I915_WRITE(DVSPOS(pipe), (crtc_y << 16) | crtc_x); @@ -492,6 +612,9 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, I915_WRITE(DVSSURF(pipe), i915_gem_obj_ggtt_offset(obj) + dvssurf_offset); POSTING_READ(DVSSURF(pipe)); + + if (atomic_update) + intel_pipe_update_end(intel_crtc, start_vbl_count); } static void @@ -500,7 +623,12 @@ ilk_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc) struct drm_device *dev = plane->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_plane *intel_plane = to_intel_plane(plane); + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_plane->pipe; + u32 start_vbl_count; + bool atomic_update; + + atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count); I915_WRITE(DVSCNTR(pipe), I915_READ(DVSCNTR(pipe)) & ~DVS_ENABLE); /* Disable the scaler */ @@ -509,6 +637,9 @@ ilk_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc) I915_WRITE(DVSSURF(pipe), 0); POSTING_READ(DVSSURF(pipe)); + if (atomic_update) + intel_pipe_update_end(intel_crtc, start_vbl_count); + /* * Avoid underruns when disabling the sprite. * FIXME remove once watermark updates are done properly. -- cgit v1.2.3 From 5b633d6b8e3aa1f3ba3daa568416e36e054a3bb1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Tue, 29 Apr 2014 13:35:47 +0300 Subject: drm/i915: Perform primary enable/disable atomically with sprite updates MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Move the primary plane enable/disable to occur atomically with the sprite update that caused the primary plane visibility to change. FBC and IPS enable/disable is left to happen well before or after the primary plane change. v2: Pass intel_crtc instead of drm_crtc (Daniel) Reviewed-by: Jesse Barnes Reviewed-by: Sourab Gupta Reviewed-by: Akash Goel Signed-off-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sprite.c | 94 ++++++++++++++++++++++--------------- 1 file changed, 55 insertions(+), 39 deletions(-) (limited to 'drivers/gpu/drm/i915/intel_sprite.c') diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index a3ed840aadbe..6192e586de5d 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -120,6 +120,17 @@ static void intel_pipe_update_end(struct intel_crtc *crtc, u32 start_vbl_count) pipe_name(pipe), start_vbl_count, end_vbl_count); } +static void intel_update_primary_plane(struct intel_crtc *crtc) +{ + struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; + int reg = DSPCNTR(crtc->plane); + + if (crtc->primary_enabled) + I915_WRITE(reg, I915_READ(reg) | DISPLAY_PLANE_ENABLE); + else + I915_WRITE(reg, I915_READ(reg) & ~DISPLAY_PLANE_ENABLE); +} + static void vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc, struct drm_framebuffer *fb, @@ -219,6 +230,8 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc, atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count); + intel_update_primary_plane(intel_crtc); + I915_WRITE(SPSTRIDE(pipe, plane), fb->pitches[0]); I915_WRITE(SPPOS(pipe, plane), (crtc_y << 16) | crtc_x); @@ -231,7 +244,8 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc, I915_WRITE(SPCNTR(pipe, plane), sprctl); I915_WRITE(SPSURF(pipe, plane), i915_gem_obj_ggtt_offset(obj) + sprsurf_offset); - POSTING_READ(SPSURF(pipe, plane)); + + intel_flush_primary_plane(dev_priv, intel_crtc->plane); if (atomic_update) intel_pipe_update_end(intel_crtc, start_vbl_count); @@ -251,11 +265,14 @@ vlv_disable_plane(struct drm_plane *dplane, struct drm_crtc *crtc) atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count); + intel_update_primary_plane(intel_crtc); + I915_WRITE(SPCNTR(pipe, plane), I915_READ(SPCNTR(pipe, plane)) & ~SP_ENABLE); /* Activate double buffered register update */ I915_WRITE(SPSURF(pipe, plane), 0); - POSTING_READ(SPSURF(pipe, plane)); + + intel_flush_primary_plane(dev_priv, intel_crtc->plane); if (atomic_update) intel_pipe_update_end(intel_crtc, start_vbl_count); @@ -403,6 +420,8 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count); + intel_update_primary_plane(intel_crtc); + I915_WRITE(SPRSTRIDE(pipe), fb->pitches[0]); I915_WRITE(SPRPOS(pipe), (crtc_y << 16) | crtc_x); @@ -421,7 +440,8 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, I915_WRITE(SPRCTL(pipe), sprctl); I915_WRITE(SPRSURF(pipe), i915_gem_obj_ggtt_offset(obj) + sprsurf_offset); - POSTING_READ(SPRSURF(pipe)); + + intel_flush_primary_plane(dev_priv, intel_crtc->plane); if (atomic_update) intel_pipe_update_end(intel_crtc, start_vbl_count); @@ -440,13 +460,16 @@ ivb_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc) atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count); + intel_update_primary_plane(intel_crtc); + I915_WRITE(SPRCTL(pipe), I915_READ(SPRCTL(pipe)) & ~SPRITE_ENABLE); /* Can't leave the scaler enabled... */ if (intel_plane->can_scale) I915_WRITE(SPRSCALE(pipe), 0); /* Activate double buffered register update */ I915_WRITE(SPRSURF(pipe), 0); - POSTING_READ(SPRSURF(pipe)); + + intel_flush_primary_plane(dev_priv, intel_crtc->plane); if (atomic_update) intel_pipe_update_end(intel_crtc, start_vbl_count); @@ -598,6 +621,8 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count); + intel_update_primary_plane(intel_crtc); + I915_WRITE(DVSSTRIDE(pipe), fb->pitches[0]); I915_WRITE(DVSPOS(pipe), (crtc_y << 16) | crtc_x); @@ -611,7 +636,8 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, I915_WRITE(DVSCNTR(pipe), dvscntr); I915_WRITE(DVSSURF(pipe), i915_gem_obj_ggtt_offset(obj) + dvssurf_offset); - POSTING_READ(DVSSURF(pipe)); + + intel_flush_primary_plane(dev_priv, intel_crtc->plane); if (atomic_update) intel_pipe_update_end(intel_crtc, start_vbl_count); @@ -630,12 +656,15 @@ ilk_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc) atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count); + intel_update_primary_plane(intel_crtc); + I915_WRITE(DVSCNTR(pipe), I915_READ(DVSCNTR(pipe)) & ~DVS_ENABLE); /* Disable the scaler */ I915_WRITE(DVSSCALE(pipe), 0); /* Flush double buffered register updates */ I915_WRITE(DVSSURF(pipe), 0); - POSTING_READ(DVSSURF(pipe)); + + intel_flush_primary_plane(dev_priv, intel_crtc->plane); if (atomic_update) intel_pipe_update_end(intel_crtc, start_vbl_count); @@ -650,20 +679,10 @@ ilk_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc) } static void -intel_enable_primary(struct drm_crtc *crtc) +intel_post_enable_primary(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int reg = DSPCNTR(intel_crtc->plane); - - if (intel_crtc->primary_enabled) - return; - - intel_crtc->primary_enabled = true; - - I915_WRITE(reg, I915_READ(reg) | DISPLAY_PLANE_ENABLE); - intel_flush_primary_plane(dev_priv, intel_crtc->plane); /* * FIXME IPS should be fine as long as one plane is @@ -682,17 +701,11 @@ intel_enable_primary(struct drm_crtc *crtc) } static void -intel_disable_primary(struct drm_crtc *crtc) +intel_pre_disable_primary(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int reg = DSPCNTR(intel_crtc->plane); - - if (!intel_crtc->primary_enabled) - return; - - intel_crtc->primary_enabled = false; mutex_lock(&dev->struct_mutex); if (dev_priv->fbc.plane == intel_crtc->plane) @@ -706,9 +719,6 @@ intel_disable_primary(struct drm_crtc *crtc) * versa. */ hsw_disable_ips(intel_crtc); - - I915_WRITE(reg, I915_READ(reg) & ~DISPLAY_PLANE_ENABLE); - intel_flush_primary_plane(dev_priv, intel_crtc->plane); } static int @@ -802,7 +812,7 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, struct drm_i915_gem_object *obj = intel_fb->obj; struct drm_i915_gem_object *old_obj = intel_plane->obj; int ret; - bool disable_primary = false; + bool primary_enabled; bool visible; int hscale, vscale; int max_scale, min_scale; @@ -973,8 +983,8 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, * If the sprite is completely covering the primary plane, * we can disable the primary and save power. */ - disable_primary = drm_rect_equals(&dst, &clip) && !colorkey_enabled(intel_plane); - WARN_ON(disable_primary && !visible && intel_crtc->active); + primary_enabled = !drm_rect_equals(&dst, &clip) || colorkey_enabled(intel_plane); + WARN_ON(!primary_enabled && !visible && intel_crtc->active); mutex_lock(&dev->struct_mutex); @@ -1001,12 +1011,12 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, intel_plane->obj = obj; if (intel_crtc->active) { - /* - * Be sure to re-enable the primary before the sprite is no longer - * covering it fully. - */ - if (!disable_primary) - intel_enable_primary(crtc); + bool primary_was_enabled = intel_crtc->primary_enabled; + + intel_crtc->primary_enabled = primary_enabled; + + if (primary_was_enabled && !primary_enabled) + intel_pre_disable_primary(crtc); if (visible) intel_plane->update_plane(plane, crtc, fb, obj, @@ -1015,8 +1025,8 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, else intel_plane->disable_plane(plane, crtc); - if (disable_primary) - intel_disable_primary(crtc); + if (!primary_was_enabled && primary_enabled) + intel_post_enable_primary(crtc); } /* Unpin old obj after new one is active to avoid ugliness */ @@ -1054,8 +1064,14 @@ intel_disable_plane(struct drm_plane *plane) intel_crtc = to_intel_crtc(plane->crtc); if (intel_crtc->active) { - intel_enable_primary(plane->crtc); + bool primary_was_enabled = intel_crtc->primary_enabled; + + intel_crtc->primary_enabled = true; + intel_plane->disable_plane(plane, plane->crtc); + + if (!primary_was_enabled && intel_crtc->primary_enabled) + intel_post_enable_primary(plane->crtc); } if (intel_plane->obj) { -- cgit v1.2.3 From 25ef284a2a7de5393b2ef608046e0d48db0e6e2a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Tue, 29 Apr 2014 13:35:48 +0300 Subject: drm/i915: Add pipe update trace points MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add trace points for observing the atomic pipe update mechanism. v2: Rebased due to earlier changes v3: Pass intel_crtc instead of drm_crtc (Daniel) v4: Pass frame counter from the caller to evaded/end since the caller now always has that ready Reviewed-by: Jesse Barnes Reviewed-by: Sourab Gupta Reviewed-by: Akash Goel Signed-off-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sprite.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/gpu/drm/i915/intel_sprite.c') diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index 6192e586de5d..213cd58f0412 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -73,6 +73,8 @@ static bool intel_pipe_update_start(struct intel_crtc *crtc, uint32_t *start_vbl local_irq_disable(); + trace_i915_pipe_update_start(crtc, min, max); + for (;;) { /* * prepare_to_wait() has a memory barrier, which guarantees @@ -104,6 +106,8 @@ static bool intel_pipe_update_start(struct intel_crtc *crtc, uint32_t *start_vbl *start_vbl_count = dev->driver->get_vblank_counter(dev, pipe); + trace_i915_pipe_update_vblank_evaded(crtc, min, max, *start_vbl_count); + return true; } @@ -113,6 +117,8 @@ static void intel_pipe_update_end(struct intel_crtc *crtc, u32 start_vbl_count) enum pipe pipe = crtc->pipe; u32 end_vbl_count = dev->driver->get_vblank_counter(dev, pipe); + trace_i915_pipe_update_end(crtc, end_vbl_count); + local_irq_enable(); if (start_vbl_count != end_vbl_count) -- cgit v1.2.3 From cea165c34502052cb2aafc7e6bb36fe2036a19df Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Tue, 15 Apr 2014 21:41:35 +0300 Subject: drm/i915: Wait for vblank in hsw_enable_ips() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Now that the vblank wait is gone from intel_enable_primary_plane(), hsw_enable_ips() needs to do the vblank wait itself. Signed-off-by: Ville Syrjälä Reviewed-by: Rodrigo Vivi Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sprite.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers/gpu/drm/i915/intel_sprite.c') diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index 213cd58f0412..7780f6ce73ec 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -696,10 +696,7 @@ intel_post_enable_primary(struct drm_crtc *crtc) * when going from primary only to sprite only and vice * versa. */ - if (intel_crtc->config.ips_enabled) { - intel_wait_for_vblank(dev, intel_crtc->pipe); - hsw_enable_ips(intel_crtc); - } + hsw_enable_ips(intel_crtc); mutex_lock(&dev->struct_mutex); intel_update_fbc(dev); -- cgit v1.2.3 From 46a55d3016083bf43568a6a20ad95567fb79202d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 21 May 2014 14:04:46 +0300 Subject: drm/i915: Wait for pending page flips before enabling/disabling the primary plane MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We have to write to the primary plane base address registrer when we enable/disable the primary plane in response to sprite coverage. Those writes will cause the flip counter to increment which could interfere with the detection of CS flip completion. We could end up completing CS flips before the CS has even executed the commands from the ring. To avoid such issues, wait for CS flips to finish before we toggle the primary plane on/off. v2: Rebased due to atomic sprite update changes Testcase: igt/kms_mmio_vs_cs_flip/setplane_vs_cs_flip Signed-off-by: Ville Syrjälä Reviewed-by Rodrigo Vivi Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sprite.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/gpu/drm/i915/intel_sprite.c') diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index 7780f6ce73ec..d6acd6bd0bf0 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -1018,6 +1018,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, intel_crtc->primary_enabled = primary_enabled; + if (primary_was_enabled != primary_enabled) + intel_crtc_wait_for_pending_flips(crtc); + if (primary_was_enabled && !primary_enabled) intel_pre_disable_primary(crtc); -- cgit v1.2.3 From 51fd371bbaf94018a1223b4e2cf20b9880fd92d4 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Tue, 19 Nov 2013 12:10:12 -0500 Subject: drm: convert crtc and connection_mutex to ww_mutex (v5) For atomic, it will be quite necessary to not need to care so much about locking order. And 'state' gives us a convenient place to stash a ww_ctx for any sort of update that needs to grab multiple crtc locks. Because we will want to eventually make locking even more fine grained (giving locks to planes, connectors, etc), split out drm_modeset_lock and drm_modeset_acquire_ctx to track acquired locks. Atomic will use this to keep track of which locks have been acquired in a transaction. v1: original v2: remove a few things not needed until atomic, for now v3: update for v3 of connection_mutex patch.. v4: squash in docbook v5: doc tweaks/fixes Signed-off-by: Rob Clark Reviewed-by: Daniel Vetter Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/intel_sprite.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm/i915/intel_sprite.c') diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index d6acd6bd0bf0..1b66ddcdfb33 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -55,7 +55,7 @@ static bool intel_pipe_update_start(struct intel_crtc *crtc, uint32_t *start_vbl int scanline, min, max, vblank_start; DEFINE_WAIT(wait); - WARN_ON(!mutex_is_locked(&crtc->base.mutex)); + WARN_ON(!drm_modeset_is_locked(&crtc->base.mutex)); vblank_start = mode->crtc_vblank_start; if (mode->flags & DRM_MODE_FLAG_INTERLACE) -- cgit v1.2.3