From 347d761c74f75d55a36350ae7505498bd56b33ec Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Thu, 11 Dec 2014 01:26:04 +0200
Subject: drm: rcar-du: Don't fail probe in case of partial encoder init error

If an encoder fails to initialize the device can still be used without
the failed encoder. Don't propagate the error out of the probe function
but just skip the failed encoder.

As a special case a deferred probe request from the encoder is still
propagated out of the probe function in order not to break the deferred
probing mechanism.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 28 +++++++++++++++++++++-------
 drivers/gpu/drm/rcar-du/rcar_du_kms.c     | 15 +++++++++++++--
 2 files changed, 34 insertions(+), 9 deletions(-)

(limited to 'drivers/gpu/drm/rcar-du')

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
index 34a122a39664..7c74ecf2ca67 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
@@ -193,32 +193,46 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
 		if (renc->lvds) {
 			dev_err(rcdu->dev,
 				"Chaining LVDS and HDMI encoders not supported\n");
-			return -EINVAL;
+			ret = -EINVAL;
+			goto done;
 		}
 
 		ret = rcar_du_hdmienc_init(rcdu, renc, enc_node);
 		if (ret < 0)
-			return ret;
+			goto done;
 	} else {
 		ret = drm_encoder_init(rcdu->ddev, encoder, &encoder_funcs,
 				       encoder_type);
 		if (ret < 0)
-			return ret;
+			goto done;
 
 		drm_encoder_helper_add(encoder, &encoder_helper_funcs);
 	}
 
 	switch (encoder_type) {
 	case DRM_MODE_ENCODER_LVDS:
-		return rcar_du_lvds_connector_init(rcdu, renc, con_node);
+		ret = rcar_du_lvds_connector_init(rcdu, renc, con_node);
+		break;
 
 	case DRM_MODE_ENCODER_DAC:
-		return rcar_du_vga_connector_init(rcdu, renc);
+		ret = rcar_du_vga_connector_init(rcdu, renc);
+		break;
 
 	case DRM_MODE_ENCODER_TMDS:
-		return rcar_du_hdmi_connector_init(rcdu, renc);
+		ret = rcar_du_hdmi_connector_init(rcdu, renc);
+		break;
 
 	default:
-		return -EINVAL;
+		ret = -EINVAL;
+		break;
 	}
+
+done:
+	if (ret < 0) {
+		if (encoder->name)
+			encoder->funcs->destroy(encoder);
+		devm_kfree(rcdu->dev, renc);
+	}
+
+	return ret;
 }
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
index 0c5ee616b5a3..cc9136e8ee9c 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
@@ -346,8 +346,14 @@ static int rcar_du_encoders_init(struct rcar_du_device *rcdu)
 		/* Process the output pipeline. */
 		ret = rcar_du_encoders_init_one(rcdu, output, &ep);
 		if (ret < 0) {
-			of_node_put(ep_node);
-			return ret;
+			if (ret == -EPROBE_DEFER) {
+				of_node_put(ep_node);
+				return ret;
+			}
+
+			dev_info(rcdu->dev,
+				 "encoder initialization failed, skipping\n");
+			continue;
 		}
 
 		num_encoders += ret;
@@ -413,6 +419,11 @@ int rcar_du_modeset_init(struct rcar_du_device *rcdu)
 	if (ret < 0)
 		return ret;
 
+	if (ret == 0) {
+		dev_err(rcdu->dev, "error: no encoder could be initialized\n");
+		return -EINVAL;
+	}
+
 	num_encoders = ret;
 
 	/* Set the possible CRTCs and possible clones. There's always at least
-- 
cgit v1.2.3


From 49785e25816b0567112ba599504c3b78901a7db4 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Tue, 9 Dec 2014 22:45:11 +0200
Subject: drm: rcar-du: Configure pitch for chroma plane of multiplanar formats

The PnMWR register containing the plane stride must be programmed with
correct stride values for both the luma and chroma planes when using a
multiplanar format. Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/gpu/drm/rcar-du/rcar_du_plane.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/gpu/drm/rcar-du')

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_plane.c b/drivers/gpu/drm/rcar-du/rcar_du_plane.c
index 72a7cb47bd9f..fb3ea4f95d4a 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_plane.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_plane.c
@@ -130,6 +130,8 @@ void rcar_du_plane_update_base(struct rcar_du_plane *plane)
 	if (plane->format->planes == 2) {
 		index = (index + 1) % 8;
 
+		rcar_du_plane_write(rgrp, index, PnMWR, plane->pitch);
+
 		rcar_du_plane_write(rgrp, index, PnSPXR, plane->src_x);
 		rcar_du_plane_write(rgrp, index, PnSPYR, plane->src_y *
 				    (plane->format->bpp == 16 ? 2 : 1) / 2);
-- 
cgit v1.2.3


From 5e433b6312d9d05ac83078bfd2e6371f24d6eb46 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Sun, 26 Oct 2014 01:14:27 +0300
Subject: drm: rcar-du: Remove LVDS and HDMI encoders chaining restriction

The rcar-du driver refuses connecting an LVDS output to an HDMI encoder.
There is not technical reason for that restriction, remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/gpu/drm/rcar-du/rcar_du_encoder.c |  7 -------
 drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c | 15 +++++++++++++++
 2 files changed, 15 insertions(+), 7 deletions(-)

(limited to 'drivers/gpu/drm/rcar-du')

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
index 7c74ecf2ca67..243aba8d4dd2 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
@@ -190,13 +190,6 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
 	}
 
 	if (type == RCAR_DU_ENCODER_HDMI) {
-		if (renc->lvds) {
-			dev_err(rcdu->dev,
-				"Chaining LVDS and HDMI encoders not supported\n");
-			ret = -EINVAL;
-			goto done;
-		}
-
 		ret = rcar_du_hdmienc_init(rcdu, renc, enc_node);
 		if (ret < 0)
 			goto done;
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c b/drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c
index 359bc999a9c8..0d774a937e79 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c
@@ -21,6 +21,7 @@
 #include "rcar_du_drv.h"
 #include "rcar_du_encoder.h"
 #include "rcar_du_hdmienc.h"
+#include "rcar_du_lvdsenc.h"
 
 struct rcar_du_hdmienc {
 	struct rcar_du_encoder *renc;
@@ -39,9 +40,15 @@ static void rcar_du_hdmienc_dpms(struct drm_encoder *encoder, int mode)
 	if (hdmienc->dpms == mode)
 		return;
 
+	if (mode == DRM_MODE_DPMS_ON && hdmienc->renc->lvds)
+		rcar_du_lvdsenc_dpms(hdmienc->renc->lvds, encoder->crtc, mode);
+
 	if (sfuncs->dpms)
 		sfuncs->dpms(encoder, mode);
 
+	if (mode != DRM_MODE_DPMS_ON && hdmienc->renc->lvds)
+		rcar_du_lvdsenc_dpms(hdmienc->renc->lvds, encoder->crtc, mode);
+
 	hdmienc->dpms = mode;
 }
 
@@ -49,8 +56,16 @@ static bool rcar_du_hdmienc_mode_fixup(struct drm_encoder *encoder,
 				       const struct drm_display_mode *mode,
 				       struct drm_display_mode *adjusted_mode)
 {
+	struct rcar_du_hdmienc *hdmienc = to_rcar_hdmienc(encoder);
 	struct drm_encoder_slave_funcs *sfuncs = to_slave_funcs(encoder);
 
+	/* The internal LVDS encoder has a clock frequency operating range of
+	 * 30MHz to 150MHz. Clamp the clock accordingly.
+	 */
+	if (hdmienc->renc->lvds)
+		adjusted_mode->clock = clamp(adjusted_mode->clock,
+					     30000, 150000);
+
 	if (sfuncs->mode_fixup == NULL)
 		return true;
 
-- 
cgit v1.2.3


From 0c1c877681e73b87ef63634ed7da55a711de40a6 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Tue, 9 Dec 2014 00:21:12 +0200
Subject: drm: rcar-du: Refactor DEFR8 feature

Rename the feature from RCAR_DU_FEATURE_DEFR8 to
RCAR_DU_FEATURE_EXT_CTRL_REGS to cover all extended control registers in
addition to the DEFR8 register.

Usage of the feature is refactored to optimize runtime operation and
prepare for external clock support.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/gpu/drm/rcar-du/rcar_du_crtc.c  | 7 ++++---
 drivers/gpu/drm/rcar-du/rcar_du_drv.c   | 6 ++++--
 drivers/gpu/drm/rcar-du/rcar_du_drv.h   | 2 +-
 drivers/gpu/drm/rcar-du/rcar_du_group.c | 9 +++++----
 4 files changed, 14 insertions(+), 10 deletions(-)

(limited to 'drivers/gpu/drm/rcar-du')

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
index 23cc910951f4..cf0dca13264f 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -139,9 +139,10 @@ void rcar_du_crtc_route_output(struct drm_crtc *crtc,
 	 */
 	rcrtc->outputs |= BIT(output);
 
-	/* Store RGB routing to DPAD0 for R8A7790. */
-	if (rcar_du_has(rcdu, RCAR_DU_FEATURE_DEFR8) &&
-	    output == RCAR_DU_OUTPUT_DPAD0)
+	/* Store RGB routing to DPAD0, the hardware will be configured when
+	 * starting the CRTC.
+	 */
+	if (output == RCAR_DU_OUTPUT_DPAD0)
 		rcdu->dpad0_source = rcrtc->index;
 }
 
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index 967ae8f20233..4fb29b473560 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -56,7 +56,8 @@ static const struct rcar_du_device_info rcar_du_r8a7779_info = {
 };
 
 static const struct rcar_du_device_info rcar_du_r8a7790_info = {
-	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK | RCAR_DU_FEATURE_DEFR8,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
+		  | RCAR_DU_FEATURE_EXT_CTRL_REGS,
 	.quirks = RCAR_DU_QUIRK_ALIGN_128B | RCAR_DU_QUIRK_LVDS_LANES,
 	.num_crtcs = 3,
 	.routes = {
@@ -83,7 +84,8 @@ static const struct rcar_du_device_info rcar_du_r8a7790_info = {
 };
 
 static const struct rcar_du_device_info rcar_du_r8a7791_info = {
-	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK | RCAR_DU_FEATURE_DEFR8,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
+		  | RCAR_DU_FEATURE_EXT_CTRL_REGS,
 	.num_crtcs = 2,
 	.routes = {
 		/* R8A7791 has one RGB output, one LVDS output and one
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.h b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
index 0a724669f02d..c5b9ea6a7eaa 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
@@ -27,7 +27,7 @@ struct rcar_du_device;
 struct rcar_du_lvdsenc;
 
 #define RCAR_DU_FEATURE_CRTC_IRQ_CLOCK	(1 << 0)	/* Per-CRTC IRQ and clock */
-#define RCAR_DU_FEATURE_DEFR8		(1 << 1)	/* Has DEFR8 register */
+#define RCAR_DU_FEATURE_EXT_CTRL_REGS	(1 << 1)	/* Has extended control registers */
 
 #define RCAR_DU_QUIRK_ALIGN_128B	(1 << 0)	/* Align pitches to 128 bytes */
 #define RCAR_DU_QUIRK_LVDS_LANES	(1 << 1)	/* LVDS lanes 1 and 3 inverted */
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_group.c b/drivers/gpu/drm/rcar-du/rcar_du_group.c
index 4e7614b145db..7b6428234252 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_group.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_group.c
@@ -48,9 +48,6 @@ static void rcar_du_group_setup_defr8(struct rcar_du_group *rgrp)
 {
 	u32 defr8 = DEFR8_CODE | DEFR8_DEFE8;
 
-	if (!rcar_du_has(rgrp->dev, RCAR_DU_FEATURE_DEFR8))
-		return;
-
 	/* The DEFR8 register for the first group also controls RGB output
 	 * routing to DPAD0
 	 */
@@ -69,7 +66,8 @@ static void rcar_du_group_setup(struct rcar_du_group *rgrp)
 	rcar_du_group_write(rgrp, DEFR4, DEFR4_CODE);
 	rcar_du_group_write(rgrp, DEFR5, DEFR5_CODE | DEFR5_DEFE5);
 
-	rcar_du_group_setup_defr8(rgrp);
+	if (rcar_du_has(rgrp->dev, RCAR_DU_FEATURE_EXT_CTRL_REGS))
+		rcar_du_group_setup_defr8(rgrp);
 
 	/* Use DS1PR and DS2PR to configure planes priorities and connects the
 	 * superposition 0 to DU0 pins. DU1 pins will be configured dynamically.
@@ -149,6 +147,9 @@ static int rcar_du_set_dpad0_routing(struct rcar_du_device *rcdu)
 {
 	int ret;
 
+	if (!rcar_du_has(rcdu, RCAR_DU_FEATURE_EXT_CTRL_REGS))
+		return 0;
+
 	/* RGB output routing to DPAD0 is configured in the DEFR8 register of
 	 * the first group. As this function can be called with the DU0 and DU1
 	 * CRTCs disabled, we need to enable the first group clock before
-- 
cgit v1.2.3


From 1b30dbde8596ca8de2497c2a50d5381dfe62ee8c Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Tue, 9 Dec 2014 00:24:49 +0200
Subject: drm: rcar-du: Add support for external pixel clock

The DU uses the module functional clock as the default pixel clock, but
supports using an externally supplied pixel clock instead. Support this
by adding the external pixel clock to the DT bindings, and selecting the
clock automatically at runtime based on the requested mode pixel
frequency.

The input clock pins to DU channels routing is configurable, but
currently hardcoded to connect input clock i to channel i.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/gpu/drm/rcar-du/rcar_du_crtc.c  | 60 +++++++++++++++++++++++++++++----
 drivers/gpu/drm/rcar-du/rcar_du_crtc.h  |  1 +
 drivers/gpu/drm/rcar-du/rcar_du_group.c | 14 +++++++-
 drivers/gpu/drm/rcar-du/rcar_du_regs.h  |  4 +--
 4 files changed, 70 insertions(+), 9 deletions(-)

(limited to 'drivers/gpu/drm/rcar-du')

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
index cf0dca13264f..ce280bd390a9 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -74,33 +74,71 @@ static int rcar_du_crtc_get(struct rcar_du_crtc *rcrtc)
 	if (ret < 0)
 		return ret;
 
+	ret = clk_prepare_enable(rcrtc->extclock);
+	if (ret < 0)
+		goto error_clock;
+
 	ret = rcar_du_group_get(rcrtc->group);
 	if (ret < 0)
-		clk_disable_unprepare(rcrtc->clock);
+		goto error_group;
+
+	return 0;
 
+error_group:
+	clk_disable_unprepare(rcrtc->extclock);
+error_clock:
+	clk_disable_unprepare(rcrtc->clock);
 	return ret;
 }
 
 static void rcar_du_crtc_put(struct rcar_du_crtc *rcrtc)
 {
 	rcar_du_group_put(rcrtc->group);
+
+	clk_disable_unprepare(rcrtc->extclock);
 	clk_disable_unprepare(rcrtc->clock);
 }
 
 static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
 {
 	const struct drm_display_mode *mode = &rcrtc->crtc.mode;
+	unsigned long mode_clock = mode->clock * 1000;
 	unsigned long clk;
 	u32 value;
+	u32 escr;
 	u32 div;
 
-	/* Dot clock */
+	/* Compute the clock divisor and select the internal or external dot
+	 * clock based on the requested frequency.
+	 */
 	clk = clk_get_rate(rcrtc->clock);
-	div = DIV_ROUND_CLOSEST(clk, mode->clock * 1000);
+	div = DIV_ROUND_CLOSEST(clk, mode_clock);
 	div = clamp(div, 1U, 64U) - 1;
+	escr = div | ESCR_DCLKSEL_CLKS;
+
+	if (rcrtc->extclock) {
+		unsigned long extclk;
+		unsigned long extrate;
+		unsigned long rate;
+		u32 extdiv;
+
+		extclk = clk_get_rate(rcrtc->extclock);
+		extdiv = DIV_ROUND_CLOSEST(extclk, mode_clock);
+		extdiv = clamp(extdiv, 1U, 64U) - 1;
+
+		rate = clk / (div + 1);
+		extrate = extclk / (extdiv + 1);
+
+		if (abs((long)extrate - (long)mode_clock) <
+		    abs((long)rate - (long)mode_clock)) {
+			dev_dbg(rcrtc->group->dev->dev,
+				"crtc%u: using external clock\n", rcrtc->index);
+			escr = extdiv | ESCR_DCLKSEL_DCLKIN;
+		}
+	}
 
 	rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? ESCR2 : ESCR,
-			    ESCR_DCLKSEL_CLKS | div);
+			    escr);
 	rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? OTAR2 : OTAR, 0);
 
 	/* Signal polarities */
@@ -543,12 +581,13 @@ int rcar_du_crtc_create(struct rcar_du_group *rgrp, unsigned int index)
 	struct rcar_du_crtc *rcrtc = &rcdu->crtcs[index];
 	struct drm_crtc *crtc = &rcrtc->crtc;
 	unsigned int irqflags;
-	char clk_name[5];
+	struct clk *clk;
+	char clk_name[9];
 	char *name;
 	int irq;
 	int ret;
 
-	/* Get the CRTC clock. */
+	/* Get the CRTC clock and the optional external clock. */
 	if (rcar_du_has(rcdu, RCAR_DU_FEATURE_CRTC_IRQ_CLOCK)) {
 		sprintf(clk_name, "du.%u", index);
 		name = clk_name;
@@ -562,6 +601,15 @@ int rcar_du_crtc_create(struct rcar_du_group *rgrp, unsigned int index)
 		return PTR_ERR(rcrtc->clock);
 	}
 
+	sprintf(clk_name, "dclkin.%u", index);
+	clk = devm_clk_get(rcdu->dev, clk_name);
+	if (!IS_ERR(clk)) {
+		rcrtc->extclock = clk;
+	} else if (PTR_ERR(rcrtc->clock) == -EPROBE_DEFER) {
+		dev_info(rcdu->dev, "can't get external clock %u\n", index);
+		return -EPROBE_DEFER;
+	}
+
 	rcrtc->group = rgrp;
 	rcrtc->mmio_offset = mmio_offsets[index];
 	rcrtc->index = index;
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
index 984e6083699f..d2f89f7d2e5e 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
@@ -26,6 +26,7 @@ struct rcar_du_crtc {
 	struct drm_crtc crtc;
 
 	struct clk *clock;
+	struct clk *extclock;
 	unsigned int mmio_offset;
 	unsigned int index;
 	bool started;
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_group.c b/drivers/gpu/drm/rcar-du/rcar_du_group.c
index 7b6428234252..1bdc0ee0c248 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_group.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_group.c
@@ -66,9 +66,21 @@ static void rcar_du_group_setup(struct rcar_du_group *rgrp)
 	rcar_du_group_write(rgrp, DEFR4, DEFR4_CODE);
 	rcar_du_group_write(rgrp, DEFR5, DEFR5_CODE | DEFR5_DEFE5);
 
-	if (rcar_du_has(rgrp->dev, RCAR_DU_FEATURE_EXT_CTRL_REGS))
+	if (rcar_du_has(rgrp->dev, RCAR_DU_FEATURE_EXT_CTRL_REGS)) {
 		rcar_du_group_setup_defr8(rgrp);
 
+		/* Configure input dot clock routing. We currently hardcode the
+		 * configuration to routing DOTCLKINn to DUn.
+		 */
+		rcar_du_group_write(rgrp, DIDSR, DIDSR_CODE |
+				    DIDSR_LCDS_DCLKIN(2) |
+				    DIDSR_LCDS_DCLKIN(1) |
+				    DIDSR_LCDS_DCLKIN(0) |
+				    DIDSR_PDCS_CLK(2, 0) |
+				    DIDSR_PDCS_CLK(1, 0) |
+				    DIDSR_PDCS_CLK(0, 0));
+	}
+
 	/* Use DS1PR and DS2PR to configure planes priorities and connects the
 	 * superposition 0 to DU0 pins. DU1 pins will be configured dynamically.
 	 */
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_regs.h b/drivers/gpu/drm/rcar-du/rcar_du_regs.h
index 73f7347f740b..c3639d1db28b 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_regs.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_regs.h
@@ -256,8 +256,8 @@
 #define DIDSR_LCDS_LVDS0(n)	(2 << (8 + (n) * 2))
 #define DIDSR_LCDS_LVDS1(n)	(3 << (8 + (n) * 2))
 #define DIDSR_LCDS_MASK(n)	(3 << (8 + (n) * 2))
-#define DIDSR_PCDS_CLK(n, clk)	(clk << ((n) * 2))
-#define DIDSR_PCDS_MASK(n)	(3 << ((n) * 2))
+#define DIDSR_PDCS_CLK(n, clk)	(clk << ((n) * 2))
+#define DIDSR_PDCS_MASK(n)	(3 << ((n) * 2))
 
 /* -----------------------------------------------------------------------------
  * Display Timing Generation Registers
-- 
cgit v1.2.3


From f67e1e058b722a2a2af4e40fa80936889f128b4c Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Tue, 9 Dec 2014 00:40:59 +0200
Subject: drm: rcar-du: Output HSYNC instead of CSYNC

The DU outputs by default a composite sync signal (XOR of the horizontal
and vertical sync signals) on the HSYNC output pin. As this can confuse
devices and isn't needed by any of the supported encoders, configure the
HSYNC pin to output the horizontal sync signal.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/gpu/drm/rcar-du')

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
index ce280bd390a9..25b762b58765 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -144,7 +144,7 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
 	/* Signal polarities */
 	value = ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? 0 : DSMR_VSL)
 	      | ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? 0 : DSMR_HSL)
-	      | DSMR_DIPM_DE;
+	      | DSMR_DIPM_DE | DSMR_CSPM;
 	rcar_du_crtc_write(rcrtc, DSMR, value);
 
 	/* Display timings */
-- 
cgit v1.2.3


From 2d60762adebfa9fabca69fc2f2f2d51d4cfd7af5 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Tue, 9 Dec 2014 01:18:36 +0200
Subject: drm: rcar-du: Enable hotplug detection on HDMI connector

As HDMI support hotplug detection, enable HPD-based poll on HDMI
connectors.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/gpu/drm/rcar-du')

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c b/drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c
index 4d7d4dd46d26..322b7208171a 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c
@@ -95,6 +95,7 @@ int rcar_du_hdmi_connector_init(struct rcar_du_device *rcdu,
 	connector = &rcon->connector;
 	connector->display_info.width_mm = 0;
 	connector->display_info.height_mm = 0;
+	connector->polled = DRM_CONNECTOR_POLL_HPD;
 
 	ret = drm_connector_init(rcdu->ddev, connector, &connector_funcs,
 				 DRM_MODE_CONNECTOR_HDMIA);
-- 
cgit v1.2.3


From 3dbf11e42108d2c8a497923df959eb82388131f8 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Tue, 9 Dec 2014 13:19:10 +0200
Subject: drm: rcar-du: Clamp DPMS states to on and off

The intermediate DPMS standby and suspend states are a thing from the
past. They only matter in practice for VGA CRT monitors, and are just a
power saving vs. resume time optimization. Given that they have never
been implemented properly in the rcar-du driver and that the Intel
driver has dropped them on the vga port years ago, it's safe to only
care about the on and off states.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/gpu/drm/rcar-du/rcar_du_crtc.c    | 3 +++
 drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 3 +++
 drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c | 3 +++
 3 files changed, 9 insertions(+)

(limited to 'drivers/gpu/drm/rcar-du')

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
index 25b762b58765..86766cc6360a 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -347,6 +347,9 @@ static void rcar_du_crtc_dpms(struct drm_crtc *crtc, int mode)
 {
 	struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
 
+	if (mode != DRM_MODE_DPMS_ON)
+		mode = DRM_MODE_DPMS_OFF;
+
 	if (rcrtc->dpms == mode)
 		return;
 
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
index 243aba8d4dd2..279167f783f6 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
@@ -46,6 +46,9 @@ static void rcar_du_encoder_dpms(struct drm_encoder *encoder, int mode)
 {
 	struct rcar_du_encoder *renc = to_rcar_encoder(encoder);
 
+	if (mode != DRM_MODE_DPMS_ON)
+		mode = DRM_MODE_DPMS_OFF;
+
 	if (renc->lvds)
 		rcar_du_lvdsenc_dpms(renc->lvds, encoder->crtc, mode);
 }
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c b/drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c
index 0d774a937e79..221f0a17fd6a 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c
@@ -37,6 +37,9 @@ static void rcar_du_hdmienc_dpms(struct drm_encoder *encoder, int mode)
 	struct rcar_du_hdmienc *hdmienc = to_rcar_hdmienc(encoder);
 	struct drm_encoder_slave_funcs *sfuncs = to_slave_funcs(encoder);
 
+	if (mode != DRM_MODE_DPMS_ON)
+		mode = DRM_MODE_DPMS_OFF;
+
 	if (hdmienc->dpms == mode)
 		return;
 
-- 
cgit v1.2.3


From 906eff7fcada4186cde54eb89572fb774ab294a0 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Tue, 9 Dec 2014 19:11:18 +0200
Subject: drm: rcar-du: Implement support for interlaced modes

Accept interlaced modes on the VGA and HDMI connectors and configure the
hardware accordingly.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/gpu/drm/rcar-du/rcar_du_crtc.c    | 23 +++++++++++++++--------
 drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c |  1 +
 drivers/gpu/drm/rcar-du/rcar_du_plane.c   | 18 +++++++++++++++---
 drivers/gpu/drm/rcar-du/rcar_du_regs.h    |  1 +
 drivers/gpu/drm/rcar-du/rcar_du_vgacon.c  |  1 +
 5 files changed, 33 insertions(+), 11 deletions(-)

(limited to 'drivers/gpu/drm/rcar-du')

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
index 86766cc6360a..25c7a998fc2c 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -155,12 +155,15 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
 					mode->hsync_start - 1);
 	rcar_du_crtc_write(rcrtc, HCR,  mode->htotal - 1);
 
-	rcar_du_crtc_write(rcrtc, VDSR, mode->vtotal - mode->vsync_end - 2);
-	rcar_du_crtc_write(rcrtc, VDER, mode->vtotal - mode->vsync_end +
-					mode->vdisplay - 2);
-	rcar_du_crtc_write(rcrtc, VSPR, mode->vtotal - mode->vsync_end +
-					mode->vsync_start - 1);
-	rcar_du_crtc_write(rcrtc, VCR,  mode->vtotal - 1);
+	rcar_du_crtc_write(rcrtc, VDSR, mode->crtc_vtotal -
+					mode->crtc_vsync_end - 2);
+	rcar_du_crtc_write(rcrtc, VDER, mode->crtc_vtotal -
+					mode->crtc_vsync_end +
+					mode->crtc_vdisplay - 2);
+	rcar_du_crtc_write(rcrtc, VSPR, mode->crtc_vtotal -
+					mode->crtc_vsync_end +
+					mode->crtc_vsync_start - 1);
+	rcar_du_crtc_write(rcrtc, VCR,  mode->crtc_vtotal - 1);
 
 	rcar_du_crtc_write(rcrtc, DESR,  mode->htotal - mode->hsync_start);
 	rcar_du_crtc_write(rcrtc, DEWR,  mode->hdisplay);
@@ -256,6 +259,7 @@ void rcar_du_crtc_update_planes(struct drm_crtc *crtc)
 static void rcar_du_crtc_start(struct rcar_du_crtc *rcrtc)
 {
 	struct drm_crtc *crtc = &rcrtc->crtc;
+	bool interlaced;
 	unsigned int i;
 
 	if (rcrtc->started)
@@ -291,7 +295,10 @@ static void rcar_du_crtc_start(struct rcar_du_crtc *rcrtc)
 	 * sync mode (with the HSYNC and VSYNC signals configured as outputs and
 	 * actively driven).
 	 */
-	rcar_du_crtc_clr_set(rcrtc, DSYSR, DSYSR_TVM_MASK, DSYSR_TVM_MASTER);
+	interlaced = rcrtc->crtc.mode.flags & DRM_MODE_FLAG_INTERLACE;
+	rcar_du_crtc_clr_set(rcrtc, DSYSR, DSYSR_TVM_MASK | DSYSR_SCM_MASK,
+			     (interlaced ? DSYSR_SCM_INT_VIDEO : 0) |
+			     DSYSR_TVM_MASTER);
 
 	rcar_du_group_start_stop(rcrtc->group, true);
 
@@ -528,7 +535,7 @@ static irqreturn_t rcar_du_crtc_irq(int irq, void *arg)
 	status = rcar_du_crtc_read(rcrtc, DSSR);
 	rcar_du_crtc_write(rcrtc, DSRCR, status & DSRCR_MASK);
 
-	if (status & DSSR_VBK) {
+	if (status & DSSR_FRM) {
 		drm_handle_vblank(rcrtc->crtc.dev, rcrtc->index);
 		rcar_du_crtc_finish_page_flip(rcrtc);
 		ret = IRQ_HANDLED;
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c b/drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c
index 322b7208171a..ca94b029ac80 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c
@@ -95,6 +95,7 @@ int rcar_du_hdmi_connector_init(struct rcar_du_device *rcdu,
 	connector = &rcon->connector;
 	connector->display_info.width_mm = 0;
 	connector->display_info.height_mm = 0;
+	connector->interlace_allowed = true;
 	connector->polled = DRM_CONNECTOR_POLL_HPD;
 
 	ret = drm_connector_init(rcdu->ddev, connector, &connector_funcs,
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_plane.c b/drivers/gpu/drm/rcar-du/rcar_du_plane.c
index fb3ea4f95d4a..50f2f2b20d39 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_plane.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_plane.c
@@ -104,14 +104,22 @@ void rcar_du_plane_update_base(struct rcar_du_plane *plane)
 {
 	struct rcar_du_group *rgrp = plane->group;
 	unsigned int index = plane->hwindex;
+	bool interlaced;
 	u32 mwr;
 
-	/* Memory pitch (expressed in pixels) */
+	interlaced = plane->crtc->mode.flags & DRM_MODE_FLAG_INTERLACE;
+
+	/* Memory pitch (expressed in pixels). Must be doubled for interlaced
+	 * operation with 32bpp formats.
+	 */
 	if (plane->format->planes == 2)
 		mwr = plane->pitch;
 	else
 		mwr = plane->pitch * 8 / plane->format->bpp;
 
+	if (interlaced && plane->format->bpp == 32)
+		mwr *= 2;
+
 	rcar_du_plane_write(rgrp, index, PnMWR, mwr);
 
 	/* The Y position is expressed in raster line units and must be doubled
@@ -119,12 +127,16 @@ void rcar_du_plane_update_base(struct rcar_du_plane *plane)
 	 * doubling the Y position is found in the R8A7779 datasheet, but the
 	 * rule seems to apply there as well.
 	 *
+	 * Despite not being documented, doubling seem not to be needed when
+	 * operating in interlaced mode.
+	 *
 	 * Similarly, for the second plane, NV12 and NV21 formats seem to
-	 * require a halved Y position value.
+	 * require a halved Y position value, in both progressive and interlaced
+	 * modes.
 	 */
 	rcar_du_plane_write(rgrp, index, PnSPXR, plane->src_x);
 	rcar_du_plane_write(rgrp, index, PnSPYR, plane->src_y *
-			    (plane->format->bpp == 32 ? 2 : 1));
+			    (!interlaced && plane->format->bpp == 32 ? 2 : 1));
 	rcar_du_plane_write(rgrp, index, PnDSA0R, plane->dma[0]);
 
 	if (plane->format->planes == 2) {
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_regs.h b/drivers/gpu/drm/rcar-du/rcar_du_regs.h
index c3639d1db28b..70fcbc471ebd 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_regs.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_regs.h
@@ -34,6 +34,7 @@
 #define DSYSR_SCM_INT_NONE	(0 << 4)
 #define DSYSR_SCM_INT_SYNC	(2 << 4)
 #define DSYSR_SCM_INT_VIDEO	(3 << 4)
+#define DSYSR_SCM_MASK		(3 << 4)
 
 #define DSMR			0x00004
 #define DSMR_VSPM		(1 << 28)
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vgacon.c b/drivers/gpu/drm/rcar-du/rcar_du_vgacon.c
index 752747a5e920..9d4879921cc7 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_vgacon.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_vgacon.c
@@ -64,6 +64,7 @@ int rcar_du_vga_connector_init(struct rcar_du_device *rcdu,
 	connector = &rcon->connector;
 	connector->display_info.width_mm = 0;
 	connector->display_info.height_mm = 0;
+	connector->interlace_allowed = true;
 
 	ret = drm_connector_init(rcdu->ddev, connector, &connector_funcs,
 				 DRM_MODE_CONNECTOR_VGA);
-- 
cgit v1.2.3