From ea908ba8f73446dfbf87ff71f7cadb1994d2c5bb Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 4 Oct 2016 22:19:57 +0100 Subject: drm/armada: fix clock counts The DPMS handling wrt clock enables/disables was incorrect: we could end up decrementing the clock count multiple times if we transition via several low-power DPMS states, resulting in a kernel warning. Fix this by only testing to see whether we are entering or exiting the DPMS off state. Signed-off-by: Russell King --- drivers/gpu/drm/armada/armada_crtc.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/armada/armada_crtc.c b/drivers/gpu/drm/armada/armada_crtc.c index 2f58e9e2a59c..a51f8cbcfe26 100644 --- a/drivers/gpu/drm/armada/armada_crtc.c +++ b/drivers/gpu/drm/armada/armada_crtc.c @@ -332,17 +332,19 @@ static void armada_drm_crtc_dpms(struct drm_crtc *crtc, int dpms) { struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); - if (dcrtc->dpms != dpms) { - dcrtc->dpms = dpms; - if (!IS_ERR(dcrtc->clk) && !dpms_blanked(dpms)) - WARN_ON(clk_prepare_enable(dcrtc->clk)); - armada_drm_crtc_update(dcrtc); - if (!IS_ERR(dcrtc->clk) && dpms_blanked(dpms)) - clk_disable_unprepare(dcrtc->clk); + if (dpms_blanked(dcrtc->dpms) != dpms_blanked(dpms)) { if (dpms_blanked(dpms)) armada_drm_vblank_off(dcrtc); - else + else if (!IS_ERR(dcrtc->clk)) + WARN_ON(clk_prepare_enable(dcrtc->clk)); + dcrtc->dpms = dpms; + armada_drm_crtc_update(dcrtc); + if (!dpms_blanked(dpms)) drm_crtc_vblank_on(&dcrtc->crtc); + else if (!IS_ERR(dcrtc->clk)) + clk_disable_unprepare(dcrtc->clk); + } else if (dcrtc->dpms != dpms) { + dcrtc->dpms = dpms; } } -- cgit v1.2.3 From 8c136b590f79f7f4f60ae4709fc1340885ca2eba Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 5 Oct 2016 18:30:43 +0200 Subject: drm/etnaviv: ensure write caches are flushed at end of user cmdstream If the GPU is done with one user command stream the buffers referenced by this command stream may go away and get unmapped from the MMU. If the write caches are still dirty at this point later evictions will run into MMU faults, killing the GPU. Make sure the write caches are flushed before signaling completion of the user command stream. Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_buffer.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/etnaviv/etnaviv_buffer.c b/drivers/gpu/drm/etnaviv/etnaviv_buffer.c index cb86c7e5495c..d9230132dfbc 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_buffer.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_buffer.c @@ -329,20 +329,34 @@ void etnaviv_buffer_queue(struct etnaviv_gpu *gpu, unsigned int event, /* * Append a LINK to the submitted command buffer to return to * the ring buffer. return_target is the ring target address. - * We need three dwords: event, wait, link. + * We need at most 7 dwords in the return target: 2 cache flush + + * 2 semaphore stall + 1 event + 1 wait + 1 link. */ - return_dwords = 3; + return_dwords = 7; return_target = etnaviv_buffer_reserve(gpu, buffer, return_dwords); CMD_LINK(cmdbuf, return_dwords, return_target); /* - * Append event, wait and link pointing back to the wait - * command to the ring buffer. + * Append a cache flush, stall, event, wait and link pointing back to + * the wait command to the ring buffer. */ + if (gpu->exec_state == ETNA_PIPE_2D) { + CMD_LOAD_STATE(buffer, VIVS_GL_FLUSH_CACHE, + VIVS_GL_FLUSH_CACHE_PE2D); + } else { + CMD_LOAD_STATE(buffer, VIVS_GL_FLUSH_CACHE, + VIVS_GL_FLUSH_CACHE_DEPTH | + VIVS_GL_FLUSH_CACHE_COLOR); + CMD_LOAD_STATE(buffer, VIVS_TS_FLUSH_CACHE, + VIVS_TS_FLUSH_CACHE_FLUSH); + } + CMD_SEM(buffer, SYNC_RECIPIENT_FE, SYNC_RECIPIENT_PE); + CMD_STALL(buffer, SYNC_RECIPIENT_FE, SYNC_RECIPIENT_PE); CMD_LOAD_STATE(buffer, VIVS_GL_EVENT, VIVS_GL_EVENT_EVENT_ID(event) | VIVS_GL_EVENT_FROM_PE); CMD_WAIT(buffer); - CMD_LINK(buffer, 2, return_target + 8); + CMD_LINK(buffer, 2, etnaviv_iommu_get_cmdbuf_va(gpu, buffer) + + buffer->user_size - 4); if (drm_debug & DRM_UT_DRIVER) pr_info("stream link to 0x%08x @ 0x%08x %p\n", -- cgit v1.2.3 From 8814d2dce00f77c5eeb7278981ac6fd08835629e Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Thu, 6 Oct 2016 17:03:28 +0200 Subject: drm/etnaviv: block 64K of address space behind each cmdstream To make sure we don't place anything there which might confuse the FE prefetcher. This gets rid of another case of FE MMU faults when the address space gets crowded before triggering the reaper. Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_mmu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/etnaviv/etnaviv_mmu.c b/drivers/gpu/drm/etnaviv/etnaviv_mmu.c index d3796ed8d8c5..169ac96e8f08 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_mmu.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_mmu.c @@ -330,7 +330,8 @@ u32 etnaviv_iommu_get_cmdbuf_va(struct etnaviv_gpu *gpu, return (u32)buf->vram_node.start; mutex_lock(&mmu->lock); - ret = etnaviv_iommu_find_iova(mmu, &buf->vram_node, buf->size); + ret = etnaviv_iommu_find_iova(mmu, &buf->vram_node, + buf->size + SZ_64K); if (ret < 0) { mutex_unlock(&mmu->lock); return 0; -- cgit v1.2.3 From 2d8e60e8b0742b7a5cddc806fe38bb81ee876c33 Mon Sep 17 00:00:00 2001 From: Baole Ni Date: Tue, 2 Aug 2016 18:50:25 +0800 Subject: drm/vmwgfx: Replace numeric parameter like 0444 with macro I find that the developers often just specified the numeric value when calling a macro which is defined with a parameter for access permission. As we know, these numeric value for access permission have had the corresponding macro, and that using macro can improve the robustness and readability of the code, thus, I suggest replacing the numeric parameter with the macro. Signed-off-by: Chuansheng Liu Signed-off-by: Baole Ni Reviewed-by: Sinclair Yeh Signed-off-by: Sinclair Yeh --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index e8ae3dc476d1..18061a4bc2f2 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -241,15 +241,15 @@ static int vmwgfx_pm_notifier(struct notifier_block *nb, unsigned long val, void *ptr); MODULE_PARM_DESC(enable_fbdev, "Enable vmwgfx fbdev"); -module_param_named(enable_fbdev, enable_fbdev, int, 0600); +module_param_named(enable_fbdev, enable_fbdev, int, S_IRUSR | S_IWUSR); MODULE_PARM_DESC(force_dma_api, "Force using the DMA API for TTM pages"); -module_param_named(force_dma_api, vmw_force_iommu, int, 0600); +module_param_named(force_dma_api, vmw_force_iommu, int, S_IRUSR | S_IWUSR); MODULE_PARM_DESC(restrict_iommu, "Try to limit IOMMU usage for TTM pages"); -module_param_named(restrict_iommu, vmw_restrict_iommu, int, 0600); +module_param_named(restrict_iommu, vmw_restrict_iommu, int, S_IRUSR | S_IWUSR); MODULE_PARM_DESC(force_coherent, "Force coherent TTM pages"); -module_param_named(force_coherent, vmw_force_coherent, int, 0600); +module_param_named(force_coherent, vmw_force_coherent, int, S_IRUSR | S_IWUSR); MODULE_PARM_DESC(restrict_dma_mask, "Restrict DMA mask to 44 bits with IOMMU"); -module_param_named(restrict_dma_mask, vmw_restrict_dma_mask, int, 0600); +module_param_named(restrict_dma_mask, vmw_restrict_dma_mask, int, S_IRUSR | S_IWUSR); MODULE_PARM_DESC(assume_16bpp, "Assume 16-bpp when filtering modes"); module_param_named(assume_16bpp, vmw_assume_16bpp, int, 0600); -- cgit v1.2.3 From 07028959bcc674dc8ca143323aeab05849a83742 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 29 Aug 2016 08:08:28 +0100 Subject: drm/vmwgfx: Remove call to reservation_object_test_signaled_rcu before wait Since fence_wait_timeout_reservation_object_wait_timeout_rcu() with a timeout of 0 becomes reservation_object_test_signaled_rcu(), we do not need to handle such conversion in the caller. The only challenge are those callers that wish to differentiate the error code between the nonblocking busy check and potentially blocking wait. Signed-off-by: Chris Wilson Cc: Sinclair Yeh Cc: Thomas Hellstrom Reviewed-by: Sinclair Yeh Signed-off-by: Sinclair Yeh --- drivers/gpu/drm/vmwgfx/vmwgfx_resource.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index 6a328d507a28..52ca1c9d070e 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -574,10 +574,8 @@ static int vmw_user_dmabuf_synccpu_grab(struct vmw_user_dma_buffer *user_bo, bool nonblock = !!(flags & drm_vmw_synccpu_dontblock); long lret; - if (nonblock) - return reservation_object_test_signaled_rcu(bo->resv, true) ? 0 : -EBUSY; - - lret = reservation_object_wait_timeout_rcu(bo->resv, true, true, MAX_SCHEDULE_TIMEOUT); + lret = reservation_object_wait_timeout_rcu(bo->resv, true, true, + nonblock ? 0 : MAX_SCHEDULE_TIMEOUT); if (!lret) return -EBUSY; else if (lret < 0) -- cgit v1.2.3 From 1f982e4e390b31d6c44fb8bf03e3462ab33b8244 Mon Sep 17 00:00:00 2001 From: Charmaine Lee Date: Mon, 10 Oct 2016 10:37:03 -0700 Subject: drm/vmwgfx: Enable SVGA_3D_CMD_DX_TRANSFER_FROM_BUFFER command And bump VMWGFX_DRIVER_MINOR to 11 Signed-off-by: Charmaine Lee Reviewed-by: Sinclair Yeh Reviewed-by: Brian Paul Signed-off-by: Sinclair Yeh --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 2 +- drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 33 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 74304b03f9d4..7d01c183079d 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -43,7 +43,7 @@ #define VMWGFX_DRIVER_DATE "20160210" #define VMWGFX_DRIVER_MAJOR 2 -#define VMWGFX_DRIVER_MINOR 10 +#define VMWGFX_DRIVER_MINOR 11 #define VMWGFX_DRIVER_PATCHLEVEL 0 #define VMWGFX_FILE_PAGE_OFFSET 0x00100000 #define VMWGFX_FIFO_STATIC_SIZE (1024*1024) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c index dc5beff2b4aa..0243acc8845f 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c @@ -3029,6 +3029,35 @@ static int vmw_cmd_dx_genmips(struct vmw_private *dev_priv, cmd->body.shaderResourceViewId); } +/** + * vmw_cmd_dx_transfer_from_buffer - + * Validate an SVGA_3D_CMD_DX_TRANSFER_FROM_BUFFER command + * + * @dev_priv: Pointer to a device private struct. + * @sw_context: The software context being used for this batch. + * @header: Pointer to the command header in the command stream. + */ +static int vmw_cmd_dx_transfer_from_buffer(struct vmw_private *dev_priv, + struct vmw_sw_context *sw_context, + SVGA3dCmdHeader *header) +{ + struct { + SVGA3dCmdHeader header; + SVGA3dCmdDXTransferFromBuffer body; + } *cmd = container_of(header, typeof(*cmd), header); + int ret; + + ret = vmw_cmd_res_check(dev_priv, sw_context, vmw_res_surface, + user_surface_converter, + &cmd->body.srcSid, NULL); + if (ret != 0) + return ret; + + return vmw_cmd_res_check(dev_priv, sw_context, vmw_res_surface, + user_surface_converter, + &cmd->body.destSid, NULL); +} + static int vmw_cmd_check_not_3d(struct vmw_private *dev_priv, struct vmw_sw_context *sw_context, void *buf, uint32_t *size) @@ -3379,6 +3408,9 @@ static const struct vmw_cmd_entry vmw_cmd_entries[SVGA_3D_CMD_MAX] = { &vmw_cmd_buffer_copy_check, true, false, true), VMW_CMD_DEF(SVGA_3D_CMD_DX_PRED_COPY_REGION, &vmw_cmd_pred_copy_check, true, false, true), + VMW_CMD_DEF(SVGA_3D_CMD_DX_TRANSFER_FROM_BUFFER, + &vmw_cmd_dx_transfer_from_buffer, + true, false, true), }; static int vmw_cmd_check(struct vmw_private *dev_priv, -- cgit v1.2.3 From e7a45284ba1abcea591f7c01b05227b6698b596c Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Mon, 10 Oct 2016 10:44:00 -0700 Subject: drm/vmwgfx: Allow resource relocations on byte boundaries So far, resource allocations have only been allowed on 4-byte boundaries. As commands get packed tighter, allow them on byte boundaries. Signed-off-by: Thomas Hellstrom Reviewed-by: Sinclair Yeh Signed-off-by: Sinclair Yeh --- drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c | 41 +++++++++++++++++++++------------ 1 file changed, 26 insertions(+), 15 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c index 0243acc8845f..b915f621187f 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c @@ -39,7 +39,7 @@ * * @head: List head for the software context's relocation list. * @res: Non-ref-counted pointer to the resource. - * @offset: Offset of 4 byte entries into the command buffer where the + * @offset: Offset of single byte entries into the command buffer where the * id that needs fixup is located. */ struct vmw_resource_relocation { @@ -109,7 +109,18 @@ static int vmw_bo_to_validate_list(struct vmw_sw_context *sw_context, struct vmw_dma_buffer *vbo, bool validate_as_mob, uint32_t *p_val_node); - +/** + * vmw_ptr_diff - Compute the offset from a to b in bytes + * + * @a: A starting pointer. + * @b: A pointer offset in the same address space. + * + * Returns: The offset in bytes between the two pointers. + */ +static size_t vmw_ptr_diff(void *a, void *b) +{ + return (unsigned long) b - (unsigned long) a; +} /** * vmw_resources_unreserve - unreserve resources previously reserved for @@ -409,7 +420,7 @@ static int vmw_resource_context_res_add(struct vmw_private *dev_priv, * @list: Pointer to head of relocation list. * @res: The resource. * @offset: Offset into the command buffer currently being parsed where the - * id that needs fixup is located. Granularity is 4 bytes. + * id that needs fixup is located. Granularity is one byte. */ static int vmw_resource_relocation_add(struct list_head *list, const struct vmw_resource *res, @@ -460,10 +471,11 @@ static void vmw_resource_relocations_apply(uint32_t *cb, struct vmw_resource_relocation *rel; list_for_each_entry(rel, list, head) { + u32 *addr = (u32 *)((unsigned long) cb + rel->offset); if (likely(rel->res != NULL)) - cb[rel->offset] = rel->res->id; + *addr = rel->res->id; else - cb[rel->offset] = SVGA_3D_CMD_NOP; + *addr = SVGA_3D_CMD_NOP; } } @@ -655,7 +667,8 @@ static int vmw_cmd_res_reloc_add(struct vmw_private *dev_priv, *p_val = NULL; ret = vmw_resource_relocation_add(&sw_context->res_relocations, res, - id_loc - sw_context->buf_start); + vmw_ptr_diff(sw_context->buf_start, + id_loc)); if (unlikely(ret != 0)) return ret; @@ -721,7 +734,7 @@ vmw_cmd_res_check(struct vmw_private *dev_priv, return vmw_resource_relocation_add (&sw_context->res_relocations, res, - id_loc - sw_context->buf_start); + vmw_ptr_diff(sw_context->buf_start, id_loc)); } ret = vmw_user_resource_lookup_handle(dev_priv, @@ -2143,10 +2156,9 @@ static int vmw_cmd_shader_define(struct vmw_private *dev_priv, return ret; return vmw_resource_relocation_add(&sw_context->res_relocations, - NULL, &cmd->header.id - - sw_context->buf_start); - - return 0; + NULL, + vmw_ptr_diff(sw_context->buf_start, + &cmd->header.id)); } /** @@ -2188,10 +2200,9 @@ static int vmw_cmd_shader_destroy(struct vmw_private *dev_priv, return ret; return vmw_resource_relocation_add(&sw_context->res_relocations, - NULL, &cmd->header.id - - sw_context->buf_start); - - return 0; + NULL, + vmw_ptr_diff(sw_context->buf_start, + &cmd->header.id)); } /** -- cgit v1.2.3 From 728c3b53995f71e4b175d5939b8ba3211b6bc34d Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Mon, 10 Oct 2016 10:45:55 -0700 Subject: drm/vmwgfx: Remove a leftover debug printout Remove a leftover debug printout Signed-off-by: Thomas Hellstrom Reviewed-by: Brian Paul Reviewed-by: Sinclair Yeh Signed-off-by: Sinclair Yeh --- drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c index b915f621187f..ddd5e8a59723 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c @@ -4275,9 +4275,6 @@ void __vmw_execbuf_release_pinned_bo(struct vmw_private *dev_priv, ttm_bo_unref(&query_val.bo); ttm_bo_unref(&pinned_val.bo); vmw_dmabuf_unreference(&dev_priv->pinned_bo); - DRM_INFO("Dummy query bo pin count: %d\n", - dev_priv->dummy_query_bo->pin_count); - out_unlock: return; -- cgit v1.2.3 From 51ab70bed997f64f091a639dbe22b629725a7faf Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Mon, 10 Oct 2016 10:51:24 -0700 Subject: drm/vmwgfx: Limit the user-space command buffer size With older hardware versions, the user could specify arbitrarily large command buffer sizes, causing a vmalloc / vmap space exhaustion. Signed-off-by: Thomas Hellstrom Reviewed-by: Brian Paul Reviewed-by: Sinclair Yeh Signed-off-by: Sinclair Yeh Cc: stable@vger.kernel.org --- drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c index ddd5e8a59723..d1f4a48dee0f 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c @@ -3891,14 +3891,14 @@ static void *vmw_execbuf_cmdbuf(struct vmw_private *dev_priv, int ret; *header = NULL; - if (!dev_priv->cman || kernel_commands) - return kernel_commands; - if (command_size > SVGA_CB_MAX_SIZE) { DRM_ERROR("Command buffer is too large.\n"); return ERR_PTR(-EINVAL); } + if (!dev_priv->cman || kernel_commands) + return kernel_commands; + /* If possible, add a little space for fencing. */ cmdbuf_size = command_size + 512; cmdbuf_size = min_t(size_t, cmdbuf_size, SVGA_CB_MAX_SIZE); -- cgit v1.2.3 From a19440304db2d97aed5cee9bfa5017c98d2348bf Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Mon, 10 Oct 2016 11:06:45 -0700 Subject: drm/vmwgfx: Avoid validating views on view destruction When a view destruction command was present in the command stream, the view was validated to avoid a device error. That caused excessive and unnecessary validations of views, surfaces and mobs on view destruction. Replace this with a new relocation type that patches the view destruction command to a NOP if the view is not present in the device after the execbuf validation sequence. Also add checks for the member size of the vmw_res_relocation struct. Fixes sporadic command submission errors on google-earth exit. Reported-by: Brian Paul Signed-off-by: Thomas Hellstrom Reviewed-by: Brian Paul Reviewed-by: Sinclair Yeh Signed-off-by: Sinclair Yeh Cc: stable@vger.kernel.org --- drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c | 71 +++++++++++++++++++++++++++------ 1 file changed, 58 insertions(+), 13 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c index d1f4a48dee0f..c7b53d987f06 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c @@ -34,6 +34,24 @@ #define VMW_RES_HT_ORDER 12 +/** + * enum vmw_resource_relocation_type - Relocation type for resources + * + * @vmw_res_rel_normal: Traditional relocation. The resource id in the + * command stream is replaced with the actual id after validation. + * @vmw_res_rel_nop: NOP relocation. The command is unconditionally replaced + * with a NOP. + * @vmw_res_rel_cond_nop: Conditional NOP relocation. If the resource id + * after validation is -1, the command is replaced with a NOP. Otherwise no + * action. + */ +enum vmw_resource_relocation_type { + vmw_res_rel_normal, + vmw_res_rel_nop, + vmw_res_rel_cond_nop, + vmw_res_rel_max +}; + /** * struct vmw_resource_relocation - Relocation info for resources * @@ -41,11 +59,13 @@ * @res: Non-ref-counted pointer to the resource. * @offset: Offset of single byte entries into the command buffer where the * id that needs fixup is located. + * @rel_type: Type of relocation. */ struct vmw_resource_relocation { struct list_head head; const struct vmw_resource *res; - unsigned long offset; + u32 offset:29; + enum vmw_resource_relocation_type rel_type:3; }; /** @@ -421,10 +441,13 @@ static int vmw_resource_context_res_add(struct vmw_private *dev_priv, * @res: The resource. * @offset: Offset into the command buffer currently being parsed where the * id that needs fixup is located. Granularity is one byte. + * @rel_type: Relocation type. */ static int vmw_resource_relocation_add(struct list_head *list, const struct vmw_resource *res, - unsigned long offset) + unsigned long offset, + enum vmw_resource_relocation_type + rel_type) { struct vmw_resource_relocation *rel; @@ -436,6 +459,7 @@ static int vmw_resource_relocation_add(struct list_head *list, rel->res = res; rel->offset = offset; + rel->rel_type = rel_type; list_add_tail(&rel->head, list); return 0; @@ -470,12 +494,24 @@ static void vmw_resource_relocations_apply(uint32_t *cb, { struct vmw_resource_relocation *rel; + /* Validate the struct vmw_resource_relocation member size */ + BUILD_BUG_ON(SVGA_CB_MAX_SIZE >= (1 << 29)); + BUILD_BUG_ON(vmw_res_rel_max >= (1 << 3)); + list_for_each_entry(rel, list, head) { u32 *addr = (u32 *)((unsigned long) cb + rel->offset); - if (likely(rel->res != NULL)) + switch (rel->rel_type) { + case vmw_res_rel_normal: *addr = rel->res->id; - else + break; + case vmw_res_rel_nop: *addr = SVGA_3D_CMD_NOP; + break; + default: + if (rel->res->id == -1) + *addr = SVGA_3D_CMD_NOP; + break; + } } } @@ -668,7 +704,8 @@ static int vmw_cmd_res_reloc_add(struct vmw_private *dev_priv, ret = vmw_resource_relocation_add(&sw_context->res_relocations, res, vmw_ptr_diff(sw_context->buf_start, - id_loc)); + id_loc), + vmw_res_rel_normal); if (unlikely(ret != 0)) return ret; @@ -734,7 +771,8 @@ vmw_cmd_res_check(struct vmw_private *dev_priv, return vmw_resource_relocation_add (&sw_context->res_relocations, res, - vmw_ptr_diff(sw_context->buf_start, id_loc)); + vmw_ptr_diff(sw_context->buf_start, id_loc), + vmw_res_rel_normal); } ret = vmw_user_resource_lookup_handle(dev_priv, @@ -2158,7 +2196,8 @@ static int vmw_cmd_shader_define(struct vmw_private *dev_priv, return vmw_resource_relocation_add(&sw_context->res_relocations, NULL, vmw_ptr_diff(sw_context->buf_start, - &cmd->header.id)); + &cmd->header.id), + vmw_res_rel_nop); } /** @@ -2202,7 +2241,8 @@ static int vmw_cmd_shader_destroy(struct vmw_private *dev_priv, return vmw_resource_relocation_add(&sw_context->res_relocations, NULL, vmw_ptr_diff(sw_context->buf_start, - &cmd->header.id)); + &cmd->header.id), + vmw_res_rel_nop); } /** @@ -2859,8 +2899,7 @@ static int vmw_cmd_dx_cid_check(struct vmw_private *dev_priv, * @header: Pointer to the command header in the command stream. * * Check that the view exists, and if it was not created using this - * command batch, make sure it's validated (present in the device) so that - * the remove command will not confuse the device. + * command batch, conditionally make this command a NOP. */ static int vmw_cmd_dx_view_remove(struct vmw_private *dev_priv, struct vmw_sw_context *sw_context, @@ -2888,10 +2927,16 @@ static int vmw_cmd_dx_view_remove(struct vmw_private *dev_priv, return ret; /* - * Add view to the validate list iff it was not created using this - * command batch. + * If the view wasn't created during this command batch, it might + * have been removed due to a context swapout, so add a + * relocation to conditionally make this command a NOP to avoid + * device errors. */ - return vmw_view_res_val_add(sw_context, view); + return vmw_resource_relocation_add(&sw_context->res_relocations, + view, + vmw_ptr_diff(sw_context->buf_start, + &cmd->header.id), + vmw_res_rel_cond_nop); } /** -- cgit v1.2.3 From 7ed3b3943281e9da32b52e2aac77bdb2c42c5117 Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Thu, 22 Sep 2016 21:54:33 +0200 Subject: drm/vmwgfx: Use kmalloc_array() in vmw_surface_define_ioctl() Multiplications for the size determination of memory allocations indicated that array data structures should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring Reviewed-by: Sinclair Yeh Signed-off-by: Sinclair Yeh --- drivers/gpu/drm/vmwgfx/vmwgfx_surface.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c index c2a721a8cef9..f55754936d90 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c @@ -763,14 +763,16 @@ int vmw_surface_define_ioctl(struct drm_device *dev, void *data, memcpy(srf->mip_levels, req->mip_levels, sizeof(srf->mip_levels)); srf->num_sizes = num_sizes; user_srf->size = size; - - srf->sizes = kmalloc(srf->num_sizes * sizeof(*srf->sizes), GFP_KERNEL); + srf->sizes = kmalloc_array(srf->num_sizes, + sizeof(*srf->sizes), + GFP_KERNEL); if (unlikely(srf->sizes == NULL)) { ret = -ENOMEM; goto out_no_sizes; } - srf->offsets = kmalloc(srf->num_sizes * sizeof(*srf->offsets), - GFP_KERNEL); + srf->offsets = kmalloc_array(srf->num_sizes, + sizeof(*srf->offsets), + GFP_KERNEL); if (unlikely(srf->offsets == NULL)) { ret = -ENOMEM; goto out_no_offsets; -- cgit v1.2.3 From c138d03f1bf3b9c7bfd449e890cc003658b5c45a Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Fri, 23 Sep 2016 17:26:02 +0200 Subject: drm/vmwgfx: Use memdup_user() rather than duplicating its implementation * Reuse existing functionality from memdup_user() instead of keeping duplicate source code. * Try this copy operation before allocating memory for the data structure member "offsets". * Delete the local variable "user_sizes" which became unnecessary with this refactoring. Signed-off-by: Markus Elfring Reviewed-by: Sinclair Yeh Signed-off-by: Sinclair Yeh --- drivers/gpu/drm/vmwgfx/vmwgfx_surface.c | 21 +++++---------------- 1 file changed, 5 insertions(+), 16 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c index f55754936d90..15504c6ca3e0 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c @@ -700,7 +700,6 @@ int vmw_surface_define_ioctl(struct drm_device *dev, void *data, struct drm_vmw_surface_create_req *req = &arg->req; struct drm_vmw_surface_arg *rep = &arg->rep; struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile; - struct drm_vmw_size __user *user_sizes; int ret; int i, j; uint32_t cur_bo_offset; @@ -763,11 +762,11 @@ int vmw_surface_define_ioctl(struct drm_device *dev, void *data, memcpy(srf->mip_levels, req->mip_levels, sizeof(srf->mip_levels)); srf->num_sizes = num_sizes; user_srf->size = size; - srf->sizes = kmalloc_array(srf->num_sizes, - sizeof(*srf->sizes), - GFP_KERNEL); - if (unlikely(srf->sizes == NULL)) { - ret = -ENOMEM; + srf->sizes = memdup_user((struct drm_vmw_size __user *)(unsigned long) + req->size_addr, + sizeof(*srf->sizes) * srf->num_sizes); + if (IS_ERR(srf->sizes)) { + ret = PTR_ERR(srf->sizes); goto out_no_sizes; } srf->offsets = kmalloc_array(srf->num_sizes, @@ -778,16 +777,6 @@ int vmw_surface_define_ioctl(struct drm_device *dev, void *data, goto out_no_offsets; } - user_sizes = (struct drm_vmw_size __user *)(unsigned long) - req->size_addr; - - ret = copy_from_user(srf->sizes, user_sizes, - srf->num_sizes * sizeof(*srf->sizes)); - if (unlikely(ret != 0)) { - ret = -EFAULT; - goto out_no_copy; - } - srf->base_size = *srf->sizes; srf->autogen_filter = SVGA3D_TEX_FILTER_NONE; srf->multisample_count = 0; -- cgit v1.2.3 From 862f6157d176c9db5a7ed423245108d9bb3d7038 Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Fri, 23 Sep 2016 17:53:49 +0200 Subject: drm/vmwgfx: Adjust checks for null pointers in 13 functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The script "checkpatch.pl" can point information out like the following. Comparison to NULL could be written !… Thus fix the affected source code places. Signed-off-by: Markus Elfring Reviewed-by: Sinclair Yeh Signed-off-by: Sinclair Yeh --- drivers/gpu/drm/vmwgfx/vmwgfx_surface.c | 31 +++++++++++++++---------------- 1 file changed, 15 insertions(+), 16 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c index 15504c6ca3e0..b445ce9b9757 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c @@ -324,7 +324,7 @@ static void vmw_hw_surface_destroy(struct vmw_resource *res) if (res->id != -1) { cmd = vmw_fifo_reserve(dev_priv, vmw_surface_destroy_size()); - if (unlikely(cmd == NULL)) { + if (unlikely(!cmd)) { DRM_ERROR("Failed reserving FIFO space for surface " "destruction.\n"); return; @@ -397,7 +397,7 @@ static int vmw_legacy_srf_create(struct vmw_resource *res) submit_size = vmw_surface_define_size(srf); cmd = vmw_fifo_reserve(dev_priv, submit_size); - if (unlikely(cmd == NULL)) { + if (unlikely(!cmd)) { DRM_ERROR("Failed reserving FIFO space for surface " "creation.\n"); ret = -ENOMEM; @@ -446,11 +446,10 @@ static int vmw_legacy_srf_dma(struct vmw_resource *res, uint8_t *cmd; struct vmw_private *dev_priv = res->dev_priv; - BUG_ON(val_buf->bo == NULL); - + BUG_ON(!val_buf->bo); submit_size = vmw_surface_dma_size(srf); cmd = vmw_fifo_reserve(dev_priv, submit_size); - if (unlikely(cmd == NULL)) { + if (unlikely(!cmd)) { DRM_ERROR("Failed reserving FIFO space for surface " "DMA.\n"); return -ENOMEM; @@ -538,7 +537,7 @@ static int vmw_legacy_srf_destroy(struct vmw_resource *res) submit_size = vmw_surface_destroy_size(); cmd = vmw_fifo_reserve(dev_priv, submit_size); - if (unlikely(cmd == NULL)) { + if (unlikely(!cmd)) { DRM_ERROR("Failed reserving FIFO space for surface " "eviction.\n"); return -ENOMEM; @@ -578,7 +577,7 @@ static int vmw_surface_init(struct vmw_private *dev_priv, int ret; struct vmw_resource *res = &srf->res; - BUG_ON(res_free == NULL); + BUG_ON(!res_free); if (!dev_priv->has_mob) vmw_fifo_resource_inc(dev_priv); ret = vmw_resource_init(dev_priv, res, true, res_free, @@ -747,7 +746,7 @@ int vmw_surface_define_ioctl(struct drm_device *dev, void *data, } user_srf = kzalloc(sizeof(*user_srf), GFP_KERNEL); - if (unlikely(user_srf == NULL)) { + if (unlikely(!user_srf)) { ret = -ENOMEM; goto out_no_user_srf; } @@ -772,7 +771,7 @@ int vmw_surface_define_ioctl(struct drm_device *dev, void *data, srf->offsets = kmalloc_array(srf->num_sizes, sizeof(*srf->offsets), GFP_KERNEL); - if (unlikely(srf->offsets == NULL)) { + if (unlikely(!srf->offsets)) { ret = -ENOMEM; goto out_no_offsets; } @@ -914,7 +913,7 @@ vmw_surface_handle_reference(struct vmw_private *dev_priv, ret = -EINVAL; base = ttm_base_object_lookup_for_ref(dev_priv->tdev, handle); - if (unlikely(base == NULL)) { + if (unlikely(!base)) { DRM_ERROR("Could not find surface to reference.\n"); goto out_no_lookup; } @@ -1060,7 +1059,7 @@ static int vmw_gb_surface_create(struct vmw_resource *res) cmd = vmw_fifo_reserve(dev_priv, submit_len); cmd2 = (typeof(cmd2))cmd; - if (unlikely(cmd == NULL)) { + if (unlikely(!cmd)) { DRM_ERROR("Failed reserving FIFO space for surface " "creation.\n"); ret = -ENOMEM; @@ -1126,7 +1125,7 @@ static int vmw_gb_surface_bind(struct vmw_resource *res, submit_size = sizeof(*cmd1) + (res->backup_dirty ? sizeof(*cmd2) : 0); cmd1 = vmw_fifo_reserve(dev_priv, submit_size); - if (unlikely(cmd1 == NULL)) { + if (unlikely(!cmd1)) { DRM_ERROR("Failed reserving FIFO space for surface " "binding.\n"); return -ENOMEM; @@ -1176,7 +1175,7 @@ static int vmw_gb_surface_unbind(struct vmw_resource *res, submit_size = sizeof(*cmd3) + (readback ? sizeof(*cmd1) : sizeof(*cmd2)); cmd = vmw_fifo_reserve(dev_priv, submit_size); - if (unlikely(cmd == NULL)) { + if (unlikely(!cmd)) { DRM_ERROR("Failed reserving FIFO space for surface " "unbinding.\n"); return -ENOMEM; @@ -1235,7 +1234,7 @@ static int vmw_gb_surface_destroy(struct vmw_resource *res) vmw_binding_res_list_scrub(&res->binding_head); cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd)); - if (unlikely(cmd == NULL)) { + if (unlikely(!cmd)) { DRM_ERROR("Failed reserving FIFO space for surface " "destruction.\n"); mutex_unlock(&dev_priv->binding_mutex); @@ -1401,7 +1400,7 @@ int vmw_gb_surface_reference_ioctl(struct drm_device *dev, void *data, user_srf = container_of(base, struct vmw_user_surface, prime.base); srf = &user_srf->srf; - if (srf->res.backup == NULL) { + if (!srf->res.backup) { DRM_ERROR("Shared GB surface is missing a backup buffer.\n"); goto out_bad_resource; } @@ -1515,7 +1514,7 @@ int vmw_surface_gb_priv_define(struct drm_device *dev, } user_srf = kzalloc(sizeof(*user_srf), GFP_KERNEL); - if (unlikely(user_srf == NULL)) { + if (unlikely(!user_srf)) { ret = -ENOMEM; goto out_no_user_srf; } -- cgit v1.2.3 From 40492f60794aaf32576cb42d9af86eed785a6e63 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sun, 9 Oct 2016 20:28:19 +0300 Subject: drm/amdgpu: use .early_unregister hook to remove DP AUX i2c When DisplayPort AUX channel i2c adapter is registered, drm_connector's kdev member is used as a parent, so we get sysfs structure like: /drm/card1/card1-DP-2/i2c-12 Because of that, there is a problem when drm core (and not the driver) calls drm_connector_unregister(), it removes parent sysfs entries ('card1-DP-2' in our example) while the i2c adapter is still registered. Later we get a WARN when we try to unregister the i2c adapter: WARNING: CPU: 3 PID: 1374 at fs/sysfs/group.c:243 sysfs_remove_group+0x14c/0x150 sysfs group ffffffff82911e40 not found for kobject 'i2c-12' To fix it, we can use the .early_unregister hook to unregister the i2c adapter before drm_connector's sysfs is torn down. Signed-off-by: Grazvydas Ignotas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c index 2e3a0543760d..e3281d4e3e41 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c @@ -765,7 +765,7 @@ amdgpu_connector_lvds_detect(struct drm_connector *connector, bool force) return ret; } -static void amdgpu_connector_destroy(struct drm_connector *connector) +static void amdgpu_connector_unregister(struct drm_connector *connector) { struct amdgpu_connector *amdgpu_connector = to_amdgpu_connector(connector); @@ -773,6 +773,12 @@ static void amdgpu_connector_destroy(struct drm_connector *connector) drm_dp_aux_unregister(&amdgpu_connector->ddc_bus->aux); amdgpu_connector->ddc_bus->has_aux = false; } +} + +static void amdgpu_connector_destroy(struct drm_connector *connector) +{ + struct amdgpu_connector *amdgpu_connector = to_amdgpu_connector(connector); + amdgpu_connector_free_edid(connector); kfree(amdgpu_connector->con_priv); drm_connector_unregister(connector); @@ -826,6 +832,7 @@ static const struct drm_connector_funcs amdgpu_connector_lvds_funcs = { .dpms = drm_helper_connector_dpms, .detect = amdgpu_connector_lvds_detect, .fill_modes = drm_helper_probe_single_connector_modes, + .early_unregister = amdgpu_connector_unregister, .destroy = amdgpu_connector_destroy, .set_property = amdgpu_connector_set_lcd_property, }; @@ -936,6 +943,7 @@ static const struct drm_connector_funcs amdgpu_connector_vga_funcs = { .dpms = drm_helper_connector_dpms, .detect = amdgpu_connector_vga_detect, .fill_modes = drm_helper_probe_single_connector_modes, + .early_unregister = amdgpu_connector_unregister, .destroy = amdgpu_connector_destroy, .set_property = amdgpu_connector_set_property, }; @@ -1203,6 +1211,7 @@ static const struct drm_connector_funcs amdgpu_connector_dvi_funcs = { .detect = amdgpu_connector_dvi_detect, .fill_modes = drm_helper_probe_single_connector_modes, .set_property = amdgpu_connector_set_property, + .early_unregister = amdgpu_connector_unregister, .destroy = amdgpu_connector_destroy, .force = amdgpu_connector_dvi_force, }; @@ -1493,6 +1502,7 @@ static const struct drm_connector_funcs amdgpu_connector_dp_funcs = { .detect = amdgpu_connector_dp_detect, .fill_modes = drm_helper_probe_single_connector_modes, .set_property = amdgpu_connector_set_property, + .early_unregister = amdgpu_connector_unregister, .destroy = amdgpu_connector_destroy, .force = amdgpu_connector_dvi_force, }; @@ -1502,6 +1512,7 @@ static const struct drm_connector_funcs amdgpu_connector_edp_funcs = { .detect = amdgpu_connector_dp_detect, .fill_modes = drm_helper_probe_single_connector_modes, .set_property = amdgpu_connector_set_lcd_property, + .early_unregister = amdgpu_connector_unregister, .destroy = amdgpu_connector_destroy, .force = amdgpu_connector_dvi_force, }; -- cgit v1.2.3 From b0c80bd5d2e317f7596fe2badc1a3379fb3211e5 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 11 Oct 2016 10:44:24 -0400 Subject: drm/radeon: fix up dp aux tear down (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Port the amdgpu fixes from Grazvydas to radeon. v2: drop unrelated whitespace change. bug: https://bugs.freedesktop.org/show_bug.cgi?id=98200 Reviewed-and-Tested-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_connectors.c | 17 +++++++++++++++++ drivers/gpu/drm/radeon/radeon_i2c.c | 3 +-- 2 files changed, 18 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 50e96d2c593d..e18839d52e3e 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -927,6 +927,16 @@ radeon_lvds_detect(struct drm_connector *connector, bool force) return ret; } +static void radeon_connector_unregister(struct drm_connector *connector) +{ + struct radeon_connector *radeon_connector = to_radeon_connector(connector); + + if (radeon_connector->ddc_bus->has_aux) { + drm_dp_aux_unregister(&radeon_connector->ddc_bus->aux); + radeon_connector->ddc_bus->has_aux = false; + } +} + static void radeon_connector_destroy(struct drm_connector *connector) { struct radeon_connector *radeon_connector = to_radeon_connector(connector); @@ -984,6 +994,7 @@ static const struct drm_connector_funcs radeon_lvds_connector_funcs = { .dpms = drm_helper_connector_dpms, .detect = radeon_lvds_detect, .fill_modes = drm_helper_probe_single_connector_modes, + .early_unregister = radeon_connector_unregister, .destroy = radeon_connector_destroy, .set_property = radeon_lvds_set_property, }; @@ -1111,6 +1122,7 @@ static const struct drm_connector_funcs radeon_vga_connector_funcs = { .dpms = drm_helper_connector_dpms, .detect = radeon_vga_detect, .fill_modes = drm_helper_probe_single_connector_modes, + .early_unregister = radeon_connector_unregister, .destroy = radeon_connector_destroy, .set_property = radeon_connector_set_property, }; @@ -1188,6 +1200,7 @@ static const struct drm_connector_funcs radeon_tv_connector_funcs = { .dpms = drm_helper_connector_dpms, .detect = radeon_tv_detect, .fill_modes = drm_helper_probe_single_connector_modes, + .early_unregister = radeon_connector_unregister, .destroy = radeon_connector_destroy, .set_property = radeon_connector_set_property, }; @@ -1519,6 +1532,7 @@ static const struct drm_connector_funcs radeon_dvi_connector_funcs = { .detect = radeon_dvi_detect, .fill_modes = drm_helper_probe_single_connector_modes, .set_property = radeon_connector_set_property, + .early_unregister = radeon_connector_unregister, .destroy = radeon_connector_destroy, .force = radeon_dvi_force, }; @@ -1832,6 +1846,7 @@ static const struct drm_connector_funcs radeon_dp_connector_funcs = { .detect = radeon_dp_detect, .fill_modes = drm_helper_probe_single_connector_modes, .set_property = radeon_connector_set_property, + .early_unregister = radeon_connector_unregister, .destroy = radeon_connector_destroy, .force = radeon_dvi_force, }; @@ -1841,6 +1856,7 @@ static const struct drm_connector_funcs radeon_edp_connector_funcs = { .detect = radeon_dp_detect, .fill_modes = drm_helper_probe_single_connector_modes, .set_property = radeon_lvds_set_property, + .early_unregister = radeon_connector_unregister, .destroy = radeon_connector_destroy, .force = radeon_dvi_force, }; @@ -1850,6 +1866,7 @@ static const struct drm_connector_funcs radeon_lvds_bridge_connector_funcs = { .detect = radeon_dp_detect, .fill_modes = drm_helper_probe_single_connector_modes, .set_property = radeon_lvds_set_property, + .early_unregister = radeon_connector_unregister, .destroy = radeon_connector_destroy, .force = radeon_dvi_force, }; diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c index 021aa005623f..29f7817af821 100644 --- a/drivers/gpu/drm/radeon/radeon_i2c.c +++ b/drivers/gpu/drm/radeon/radeon_i2c.c @@ -982,9 +982,8 @@ void radeon_i2c_destroy(struct radeon_i2c_chan *i2c) { if (!i2c) return; + WARN_ON(i2c->has_aux); i2c_del_adapter(&i2c->adapter); - if (i2c->has_aux) - drm_dp_aux_unregister(&i2c->aux); kfree(i2c); } -- cgit v1.2.3 From 9305ee6fe52035f63d70d023235b792ba22107f0 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 11 Oct 2016 10:57:39 -0400 Subject: drm/radeon: fix modeset tear down code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ordering caused problems. bug: https://bugs.freedesktop.org/show_bug.cgi?id=98200 Reviewed-and-Tested-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_display.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index b8ab30a7dd6d..cdb8cb568c15 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -1675,20 +1675,20 @@ int radeon_modeset_init(struct radeon_device *rdev) void radeon_modeset_fini(struct radeon_device *rdev) { - radeon_fbdev_fini(rdev); - kfree(rdev->mode_info.bios_hardcoded_edid); - - /* free i2c buses */ - radeon_i2c_fini(rdev); - if (rdev->mode_info.mode_config_initialized) { - radeon_afmt_fini(rdev); drm_kms_helper_poll_fini(rdev->ddev); radeon_hpd_fini(rdev); drm_crtc_force_disable_all(rdev->ddev); + radeon_fbdev_fini(rdev); + radeon_afmt_fini(rdev); drm_mode_config_cleanup(rdev->ddev); rdev->mode_info.mode_config_initialized = false; } + + kfree(rdev->mode_info.bios_hardcoded_edid); + + /* free i2c buses */ + radeon_i2c_fini(rdev); } static bool is_hdtv_mode(const struct drm_display_mode *mode) -- cgit v1.2.3 From 6ae81452f9278ba1accdd4152d75061a8349a0f3 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 7 Oct 2016 16:00:47 -0400 Subject: drm/amdgpu/gfx8: fix CGCG_CGLS handling When setting up the RLC, only disable the CGCG and CGLS bits rather than clearing the entire register to avoid losing the golden settings. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index 6c6ff57b1c95..5b289186dc92 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -4087,14 +4087,21 @@ static int gfx_v8_0_rlc_load_microcode(struct amdgpu_device *adev) static int gfx_v8_0_rlc_resume(struct amdgpu_device *adev) { int r; + u32 tmp; gfx_v8_0_rlc_stop(adev); /* disable CG */ - WREG32(mmRLC_CGCG_CGLS_CTRL, 0); + tmp = RREG32(mmRLC_CGCG_CGLS_CTRL); + tmp &= ~(RLC_CGCG_CGLS_CTRL__CGCG_EN_MASK | + RLC_CGCG_CGLS_CTRL__CGLS_EN_MASK); + WREG32(mmRLC_CGCG_CGLS_CTRL, tmp); if (adev->asic_type == CHIP_POLARIS11 || - adev->asic_type == CHIP_POLARIS10) - WREG32(mmRLC_CGCG_CGLS_CTRL_3D, 0); + adev->asic_type == CHIP_POLARIS10) { + tmp = RREG32(mmRLC_CGCG_CGLS_CTRL_3D); + tmp &= ~0x3; + WREG32(mmRLC_CGCG_CGLS_CTRL_3D, tmp); + } /* disable PG */ WREG32(mmRLC_PG_CNTL, 0); -- cgit v1.2.3 From ce199ad690bd0a6ac6bf9e4df2c87b59d76f84da Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Nicolai=20H=C3=A4hnle?= Date: Tue, 4 Oct 2016 09:43:30 +0200 Subject: drm/amdgpu: initialize the context reset_counter in amdgpu_ctx_init MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Ensure that we really only report a GPU reset if one has happened since the creation of the context. Signed-off-by: Nicolai Hähnle Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c index e203e5561107..a5e2fcbef0f0 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c @@ -43,6 +43,9 @@ static int amdgpu_ctx_init(struct amdgpu_device *adev, struct amdgpu_ctx *ctx) ctx->rings[i].sequence = 1; ctx->rings[i].fences = &ctx->fences[amdgpu_sched_jobs * i]; } + + ctx->reset_counter = atomic_read(&adev->gpu_reset_counter); + /* create context entity for each ring */ for (i = 0; i < adev->num_rings; i++) { struct amdgpu_ring *ring = adev->rings[i]; -- cgit v1.2.3 From 113d0f9db7be5a3038d9800ea1dddfb373c2b5a6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= Date: Mon, 10 Oct 2016 13:23:25 +0200 Subject: drm/radeon: allow TA_CS_BC_BASE_ADDR on SI MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Required for border colors in compute shaders. Reviewed-by: Edward O'Callaghan Reviewed-by: Alex Deucher Reviewed-by: Christian König Signed-off-by: Marek Olšák Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_drv.c | 3 ++- drivers/gpu/drm/radeon/si.c | 1 + drivers/gpu/drm/radeon/sid.h | 1 + 3 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index 91c8f4339566..00ea0002b539 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -96,9 +96,10 @@ * 2.45.0 - Allow setting shader registers using DMA/COPY packet3 on SI * 2.46.0 - Add PFP_SYNC_ME support on evergreen * 2.47.0 - Add UVD_NO_OP register support + * 2.48.0 - TA_CS_BC_BASE_ADDR allowed on SI */ #define KMS_DRIVER_MAJOR 2 -#define KMS_DRIVER_MINOR 47 +#define KMS_DRIVER_MINOR 48 #define KMS_DRIVER_PATCHLEVEL 0 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags); int radeon_driver_unload_kms(struct drm_device *dev); diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 7ee9aafbdf74..e402be8821c4 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -4431,6 +4431,7 @@ static bool si_vm_reg_valid(u32 reg) case SPI_CONFIG_CNTL: case SPI_CONFIG_CNTL_1: case TA_CNTL_AUX: + case TA_CS_BC_BASE_ADDR: return true; default: DRM_ERROR("Invalid register 0x%x in CS\n", reg); diff --git a/drivers/gpu/drm/radeon/sid.h b/drivers/gpu/drm/radeon/sid.h index eb220eecba78..65a911ddd509 100644 --- a/drivers/gpu/drm/radeon/sid.h +++ b/drivers/gpu/drm/radeon/sid.h @@ -1145,6 +1145,7 @@ #define SPI_LB_CU_MASK 0x9354 #define TA_CNTL_AUX 0x9508 +#define TA_CS_BC_BASE_ADDR 0x950C #define CC_RB_BACKEND_DISABLE 0x98F4 #define BACKEND_DISABLE(x) ((x) << 16) -- cgit v1.2.3 From b0b00ff16f2715562b7ea0dfa3a9c5b33328c8cb Mon Sep 17 00:00:00 2001 From: Arindam Nath Date: Fri, 7 Oct 2016 19:01:37 +0530 Subject: drm/amd/amdgpu: enable clockgating only after late init MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sometimes during multiple reboots, the system hangs during bootup. The issue is very random and happens once in around 50 reboots or so. It seems if clockgating is enabled before late init, the GFX engine sometimes does not respond. This patch changes the ordering a little so that both powergating and clockgating are enabled only after late init calls. Reviewed-by: Christian König Signed-off-by: Arindam Nath Tested-by: Sunil Uttarwar Reviewed-by: Tom St Denis Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index a58513f271e3..928774f5a7e0 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -1411,13 +1411,6 @@ static int amdgpu_late_init(struct amdgpu_device *adev) if (adev->ip_blocks[i].type == AMD_IP_BLOCK_TYPE_UVD || adev->ip_blocks[i].type == AMD_IP_BLOCK_TYPE_VCE) continue; - /* enable clockgating to save power */ - r = adev->ip_blocks[i].funcs->set_clockgating_state((void *)adev, - AMD_CG_STATE_GATE); - if (r) { - DRM_ERROR("set_clockgating_state(gate) of IP block <%s> failed %d\n", adev->ip_blocks[i].funcs->name, r); - return r; - } if (adev->ip_blocks[i].funcs->late_init) { r = adev->ip_blocks[i].funcs->late_init((void *)adev); if (r) { @@ -1426,6 +1419,13 @@ static int amdgpu_late_init(struct amdgpu_device *adev) } adev->ip_block_status[i].late_initialized = true; } + /* enable clockgating to save power */ + r = adev->ip_blocks[i].funcs->set_clockgating_state((void *)adev, + AMD_CG_STATE_GATE); + if (r) { + DRM_ERROR("set_clockgating_state(gate) of IP block <%s> failed %d\n", adev->ip_blocks[i].funcs->name, r); + return r; + } } return 0; -- cgit v1.2.3 From 4a446d55843fb82fc5bc6c72d27bfc20b6c294c3 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 7 Oct 2016 14:48:18 -0400 Subject: drm/amdgpu: clarify UVD/VCE special handling for CG MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit UVD and VCE CG are handled specially, however the previous fix for this skipped late init for those blocks rather than just CG. Just protect the CG function call. No functional change since UVD and VCE don't currently utilize a late_init function. Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 928774f5a7e0..15afe22ca890 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -1408,9 +1408,6 @@ static int amdgpu_late_init(struct amdgpu_device *adev) for (i = 0; i < adev->num_ip_blocks; i++) { if (!adev->ip_block_status[i].valid) continue; - if (adev->ip_blocks[i].type == AMD_IP_BLOCK_TYPE_UVD || - adev->ip_blocks[i].type == AMD_IP_BLOCK_TYPE_VCE) - continue; if (adev->ip_blocks[i].funcs->late_init) { r = adev->ip_blocks[i].funcs->late_init((void *)adev); if (r) { @@ -1419,12 +1416,17 @@ static int amdgpu_late_init(struct amdgpu_device *adev) } adev->ip_block_status[i].late_initialized = true; } - /* enable clockgating to save power */ - r = adev->ip_blocks[i].funcs->set_clockgating_state((void *)adev, - AMD_CG_STATE_GATE); - if (r) { - DRM_ERROR("set_clockgating_state(gate) of IP block <%s> failed %d\n", adev->ip_blocks[i].funcs->name, r); - return r; + /* skip CG for VCE/UVD, it's handled specially */ + if (adev->ip_blocks[i].type != AMD_IP_BLOCK_TYPE_UVD && + adev->ip_blocks[i].type != AMD_IP_BLOCK_TYPE_VCE) { + /* enable clockgating to save power */ + r = adev->ip_blocks[i].funcs->set_clockgating_state((void *)adev, + AMD_CG_STATE_GATE); + if (r) { + DRM_ERROR("set_clockgating_state(gate) of IP block <%s> failed %d\n", + adev->ip_blocks[i].funcs->name, r); + return r; + } } } -- cgit v1.2.3 From dc8184aa8621ee8048652496884d9f40d4bb407f Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Mon, 10 Oct 2016 15:57:21 +0800 Subject: drm/amdgpu: change vblank_time's calculation method to reduce computational error. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_dpm.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_dpm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_dpm.c index fe36caf1b7d7..14f57d9915e3 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_dpm.c @@ -113,24 +113,26 @@ void amdgpu_dpm_print_ps_status(struct amdgpu_device *adev, printk("\n"); } + u32 amdgpu_dpm_get_vblank_time(struct amdgpu_device *adev) { struct drm_device *dev = adev->ddev; struct drm_crtc *crtc; struct amdgpu_crtc *amdgpu_crtc; - u32 line_time_us, vblank_lines; + u32 vblank_in_pixels; u32 vblank_time_us = 0xffffffff; /* if the displays are off, vblank time is max */ if (adev->mode_info.num_crtc && adev->mode_info.mode_config_initialized) { list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { amdgpu_crtc = to_amdgpu_crtc(crtc); if (crtc->enabled && amdgpu_crtc->enabled && amdgpu_crtc->hw_mode.clock) { - line_time_us = (amdgpu_crtc->hw_mode.crtc_htotal * 1000) / - amdgpu_crtc->hw_mode.clock; - vblank_lines = amdgpu_crtc->hw_mode.crtc_vblank_end - + vblank_in_pixels = + amdgpu_crtc->hw_mode.crtc_htotal * + (amdgpu_crtc->hw_mode.crtc_vblank_end - amdgpu_crtc->hw_mode.crtc_vdisplay + - (amdgpu_crtc->v_border * 2); - vblank_time_us = vblank_lines * line_time_us; + (amdgpu_crtc->v_border * 2)); + + vblank_time_us = vblank_in_pixels * 1000 / amdgpu_crtc->hw_mode.clock; break; } } -- cgit v1.2.3 From 02cfb5fccb0f9f968f0e208d89d9769aa16267bc Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 12 Oct 2016 15:28:55 -0400 Subject: drm/radeon: change vblank_time's calculation method to reduce computational error. Ported from Rex's amdgpu change. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/r600_dpm.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/radeon/r600_dpm.c b/drivers/gpu/drm/radeon/r600_dpm.c index 6a4b020dd0b4..5a26eb4545aa 100644 --- a/drivers/gpu/drm/radeon/r600_dpm.c +++ b/drivers/gpu/drm/radeon/r600_dpm.c @@ -156,19 +156,20 @@ u32 r600_dpm_get_vblank_time(struct radeon_device *rdev) struct drm_device *dev = rdev->ddev; struct drm_crtc *crtc; struct radeon_crtc *radeon_crtc; - u32 line_time_us, vblank_lines; + u32 vblank_in_pixels; u32 vblank_time_us = 0xffffffff; /* if the displays are off, vblank time is max */ if (rdev->num_crtc && rdev->mode_info.mode_config_initialized) { list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { radeon_crtc = to_radeon_crtc(crtc); if (crtc->enabled && radeon_crtc->enabled && radeon_crtc->hw_mode.clock) { - line_time_us = (radeon_crtc->hw_mode.crtc_htotal * 1000) / - radeon_crtc->hw_mode.clock; - vblank_lines = radeon_crtc->hw_mode.crtc_vblank_end - - radeon_crtc->hw_mode.crtc_vdisplay + - (radeon_crtc->v_border * 2); - vblank_time_us = vblank_lines * line_time_us; + vblank_in_pixels = + radeon_crtc->hw_mode.crtc_htotal * + (radeon_crtc->hw_mode.crtc_vblank_end - + radeon_crtc->hw_mode.crtc_vdisplay + + (radeon_crtc->v_border * 2)); + + vblank_time_us = vblank_in_pixels * 1000 / radeon_crtc->hw_mode.clock; break; } } -- cgit v1.2.3 From e07053241b0264e7b107b2b3f4d899635985d353 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 11 Oct 2016 18:44:46 +0800 Subject: drm/amd/powerplay: fix static checker warnings in iceland_smc.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit add array length check to avoid buffer overflow. Signed-off-by: Rex Zhu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/smumgr/iceland_smc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/iceland_smc.c b/drivers/gpu/drm/amd/powerplay/smumgr/iceland_smc.c index eda802bc63c8..8c889caba420 100644 --- a/drivers/gpu/drm/amd/powerplay/smumgr/iceland_smc.c +++ b/drivers/gpu/drm/amd/powerplay/smumgr/iceland_smc.c @@ -2458,7 +2458,7 @@ static int iceland_set_mc_special_registers(struct pp_hwmgr *hwmgr, PP_ASSERT_WITH_CODE((j <= SMU71_DISCRETE_MC_REGISTER_ARRAY_SIZE), "Invalid VramInfo table.", return -EINVAL); - if (!data->is_memory_gddr5) { + if (!data->is_memory_gddr5 && j < SMU71_DISCRETE_MC_REGISTER_ARRAY_SIZE) { table->mc_reg_address[j].s1 = mmMC_PMG_AUTO_CMD; table->mc_reg_address[j].s0 = mmMC_PMG_AUTO_CMD; for (k = 0; k < table->num_entries; k++) { -- cgit v1.2.3 From 9faa6b0277fab4ab91db4d69bc47566fdfbae48b Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 11 Oct 2016 18:51:16 +0800 Subject: drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit variable dereferenced before check it Signed-off-by: Rex Zhu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 508245d49d33..7c67a5a91182 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -3802,13 +3802,15 @@ static inline bool smu7_are_power_levels_equal(const struct smu7_performance_lev int smu7_check_states_equal(struct pp_hwmgr *hwmgr, const struct pp_hw_power_state *pstate1, const struct pp_hw_power_state *pstate2, bool *equal) { - const struct smu7_power_state *psa = cast_const_phw_smu7_power_state(pstate1); - const struct smu7_power_state *psb = cast_const_phw_smu7_power_state(pstate2); + const struct smu7_power_state *psa; + const struct smu7_power_state *psb; int i; if (pstate1 == NULL || pstate2 == NULL || equal == NULL) return -EINVAL; + psa = cast_const_phw_smu7_power_state(pstate1); + psb = cast_const_phw_smu7_power_state(pstate2); /* If the two states don't even have the same number of performance levels they cannot be the same state. */ if (psa->performance_level_count != psb->performance_level_count) { *equal = false; -- cgit v1.2.3 From eeb2fa0c97ba661f8b7fb210a1de10928b67a47b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 12 Oct 2016 09:17:30 +0300 Subject: drm/amdgpu: potential NULL dereference in debugfs code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit debugfs_create_file() returns NULL on error, it only returns error pointers if debugfs isn't enabled in the config and we checked for that earlier so it can't happen. Fixes: 4f4824b55650 ('drm/amd/amdgpu: Convert ring debugfs entries to binary') Reviewed-by: Christian König Signed-off-by: Dan Carpenter Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c index e1fa8731d1e2..3cb5e903cd62 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c @@ -345,8 +345,8 @@ static int amdgpu_debugfs_ring_init(struct amdgpu_device *adev, ent = debugfs_create_file(name, S_IFREG | S_IRUGO, root, ring, &amdgpu_debugfs_ring_fops); - if (IS_ERR(ent)) - return PTR_ERR(ent); + if (!ent) + return -ENOMEM; i_size_write(ent->d_inode, ring->ring_size + 12); ring->ent = ent; -- cgit v1.2.3 From 24e8df6a6837d6cff182e84b838dc1d6971251fc Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Thu, 13 Oct 2016 15:32:04 +0800 Subject: drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rex Zhu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 7c67a5a91182..e7fb8e95436b 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -1452,8 +1452,10 @@ static int smu7_get_evv_voltages(struct pp_hwmgr *hwmgr) struct phm_ppt_v1_clock_voltage_dependency_table *sclk_table = NULL; - if (table_info != NULL) - sclk_table = table_info->vdd_dep_on_sclk; + if (table_info == NULL) + return -EINVAL; + + sclk_table = table_info->vdd_dep_on_sclk; for (i = 0; i < SMU7_MAX_LEAKAGE_COUNT; i++) { vv_id = ATOM_VIRTUAL_VOLTAGE_ID0 + i; -- cgit v1.2.3 From aee3960a0ca34f8bf7dbcdb330c4f37a0f94dd8a Mon Sep 17 00:00:00 2001 From: Tom St Denis Date: Thu, 13 Oct 2016 17:46:45 -0400 Subject: drm/amdgpu/si_dpm: Limit clocks on HD86xx part Limit clocks on a specific HD86xx part to avoid crashes (while awaiting an appropriate PP fix). Signed-off-by: Tom St Denis Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/si_dpm.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/si_dpm.c b/drivers/gpu/drm/amd/amdgpu/si_dpm.c index 8bd08925b370..3de7bca5854b 100644 --- a/drivers/gpu/drm/amd/amdgpu/si_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/si_dpm.c @@ -3499,6 +3499,12 @@ static void si_apply_state_adjust_rules(struct amdgpu_device *adev, max_sclk = 75000; max_mclk = 80000; } + /* Limit clocks for some HD8600 parts */ + if (adev->pdev->device == 0x6660 && + adev->pdev->revision == 0x83) { + max_sclk = 75000; + max_mclk = 80000; + } if (rps->vce_active) { rps->evclk = adev->pm.dpm.vce_states[adev->pm.dpm.vce_level].evclk; -- cgit v1.2.3 From da146d3b5262c1866c868b9dec1bd0f834d6ded6 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 13 Oct 2016 16:07:03 -0400 Subject: drm/amdgpu: fix amdgpu_need_full_reset (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit IP types are not an index. Each asic may have number and type of IPs. Properly check the the type rather than using the type id as an index. v2: fix all the IPs to not use IP type as an idx as well. Reviewed-by: Chunming Zhou Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 23 ++++++++++++++++------- drivers/gpu/drm/amd/amdgpu/dce_v10_0.c | 12 ++---------- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 17 +++++++++-------- drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c | 13 ++++++------- drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c | 14 ++++++-------- drivers/gpu/drm/amd/amdgpu/tonga_ih.c | 14 ++++++-------- drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c | 14 +++++++------- drivers/gpu/drm/amd/amdgpu/vce_v3_0.c | 15 +++++++-------- drivers/gpu/drm/amd/include/amd_shared.h | 2 +- 9 files changed, 60 insertions(+), 64 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 15afe22ca890..fda0e57c5e0f 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2075,7 +2075,8 @@ static bool amdgpu_check_soft_reset(struct amdgpu_device *adev) if (!adev->ip_block_status[i].valid) continue; if (adev->ip_blocks[i].funcs->check_soft_reset) - adev->ip_blocks[i].funcs->check_soft_reset(adev); + adev->ip_block_status[i].hang = + adev->ip_blocks[i].funcs->check_soft_reset(adev); if (adev->ip_block_status[i].hang) { DRM_INFO("IP block:%d is hang!\n", i); asic_hang = true; @@ -2104,12 +2105,20 @@ static int amdgpu_pre_soft_reset(struct amdgpu_device *adev) static bool amdgpu_need_full_reset(struct amdgpu_device *adev) { - if (adev->ip_block_status[AMD_IP_BLOCK_TYPE_GMC].hang || - adev->ip_block_status[AMD_IP_BLOCK_TYPE_SMC].hang || - adev->ip_block_status[AMD_IP_BLOCK_TYPE_ACP].hang || - adev->ip_block_status[AMD_IP_BLOCK_TYPE_DCE].hang) { - DRM_INFO("Some block need full reset!\n"); - return true; + int i; + + for (i = 0; i < adev->num_ip_blocks; i++) { + if (!adev->ip_block_status[i].valid) + continue; + if ((adev->ip_blocks[i].type == AMD_IP_BLOCK_TYPE_GMC) || + (adev->ip_blocks[i].type == AMD_IP_BLOCK_TYPE_SMC) || + (adev->ip_blocks[i].type == AMD_IP_BLOCK_TYPE_ACP) || + (adev->ip_blocks[i].type == AMD_IP_BLOCK_TYPE_DCE)) { + if (adev->ip_block_status[i].hang) { + DRM_INFO("Some block need full reset!\n"); + return true; + } + } } return false; } diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c index 613ebb7ed50f..4108c686aa7c 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c @@ -3188,16 +3188,11 @@ static int dce_v10_0_wait_for_idle(void *handle) return 0; } -static int dce_v10_0_check_soft_reset(void *handle) +static bool dce_v10_0_check_soft_reset(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; - if (dce_v10_0_is_display_hung(adev)) - adev->ip_block_status[AMD_IP_BLOCK_TYPE_DCE].hang = true; - else - adev->ip_block_status[AMD_IP_BLOCK_TYPE_DCE].hang = false; - - return 0; + return dce_v10_0_is_display_hung(adev); } static int dce_v10_0_soft_reset(void *handle) @@ -3205,9 +3200,6 @@ static int dce_v10_0_soft_reset(void *handle) u32 srbm_soft_reset = 0, tmp; struct amdgpu_device *adev = (struct amdgpu_device *)handle; - if (!adev->ip_block_status[AMD_IP_BLOCK_TYPE_DCE].hang) - return 0; - if (dce_v10_0_is_display_hung(adev)) srbm_soft_reset |= SRBM_SOFT_RESET__SOFT_RESET_DC_MASK; diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index 5b289186dc92..ee6a48a09214 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -5144,7 +5144,7 @@ static int gfx_v8_0_wait_for_idle(void *handle) return -ETIMEDOUT; } -static int gfx_v8_0_check_soft_reset(void *handle) +static bool gfx_v8_0_check_soft_reset(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; u32 grbm_soft_reset = 0, srbm_soft_reset = 0; @@ -5196,16 +5196,14 @@ static int gfx_v8_0_check_soft_reset(void *handle) SRBM_SOFT_RESET, SOFT_RESET_SEM, 1); if (grbm_soft_reset || srbm_soft_reset) { - adev->ip_block_status[AMD_IP_BLOCK_TYPE_GFX].hang = true; adev->gfx.grbm_soft_reset = grbm_soft_reset; adev->gfx.srbm_soft_reset = srbm_soft_reset; + return true; } else { - adev->ip_block_status[AMD_IP_BLOCK_TYPE_GFX].hang = false; adev->gfx.grbm_soft_reset = 0; adev->gfx.srbm_soft_reset = 0; + return false; } - - return 0; } static void gfx_v8_0_inactive_hqd(struct amdgpu_device *adev, @@ -5233,7 +5231,8 @@ static int gfx_v8_0_pre_soft_reset(void *handle) struct amdgpu_device *adev = (struct amdgpu_device *)handle; u32 grbm_soft_reset = 0, srbm_soft_reset = 0; - if (!adev->ip_block_status[AMD_IP_BLOCK_TYPE_GFX].hang) + if ((!adev->gfx.grbm_soft_reset) && + (!adev->gfx.srbm_soft_reset)) return 0; grbm_soft_reset = adev->gfx.grbm_soft_reset; @@ -5271,7 +5270,8 @@ static int gfx_v8_0_soft_reset(void *handle) u32 grbm_soft_reset = 0, srbm_soft_reset = 0; u32 tmp; - if (!adev->ip_block_status[AMD_IP_BLOCK_TYPE_GFX].hang) + if ((!adev->gfx.grbm_soft_reset) && + (!adev->gfx.srbm_soft_reset)) return 0; grbm_soft_reset = adev->gfx.grbm_soft_reset; @@ -5341,7 +5341,8 @@ static int gfx_v8_0_post_soft_reset(void *handle) struct amdgpu_device *adev = (struct amdgpu_device *)handle; u32 grbm_soft_reset = 0, srbm_soft_reset = 0; - if (!adev->ip_block_status[AMD_IP_BLOCK_TYPE_GFX].hang) + if ((!adev->gfx.grbm_soft_reset) && + (!adev->gfx.srbm_soft_reset)) return 0; grbm_soft_reset = adev->gfx.grbm_soft_reset; diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c index 1b319f5bc696..c22ef140a542 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c @@ -1099,7 +1099,7 @@ static int gmc_v8_0_wait_for_idle(void *handle) } -static int gmc_v8_0_check_soft_reset(void *handle) +static bool gmc_v8_0_check_soft_reset(void *handle) { u32 srbm_soft_reset = 0; struct amdgpu_device *adev = (struct amdgpu_device *)handle; @@ -1116,20 +1116,19 @@ static int gmc_v8_0_check_soft_reset(void *handle) SRBM_SOFT_RESET, SOFT_RESET_MC, 1); } if (srbm_soft_reset) { - adev->ip_block_status[AMD_IP_BLOCK_TYPE_GMC].hang = true; adev->mc.srbm_soft_reset = srbm_soft_reset; + return true; } else { - adev->ip_block_status[AMD_IP_BLOCK_TYPE_GMC].hang = false; adev->mc.srbm_soft_reset = 0; + return false; } - return 0; } static int gmc_v8_0_pre_soft_reset(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; - if (!adev->ip_block_status[AMD_IP_BLOCK_TYPE_GMC].hang) + if (!adev->mc.srbm_soft_reset) return 0; gmc_v8_0_mc_stop(adev, &adev->mc.save); @@ -1145,7 +1144,7 @@ static int gmc_v8_0_soft_reset(void *handle) struct amdgpu_device *adev = (struct amdgpu_device *)handle; u32 srbm_soft_reset; - if (!adev->ip_block_status[AMD_IP_BLOCK_TYPE_GMC].hang) + if (!adev->mc.srbm_soft_reset) return 0; srbm_soft_reset = adev->mc.srbm_soft_reset; @@ -1175,7 +1174,7 @@ static int gmc_v8_0_post_soft_reset(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; - if (!adev->ip_block_status[AMD_IP_BLOCK_TYPE_GMC].hang) + if (!adev->mc.srbm_soft_reset) return 0; gmc_v8_0_mc_resume(adev, &adev->mc.save); diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c index f325fd86430b..a9d10941fb53 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c @@ -1268,7 +1268,7 @@ static int sdma_v3_0_wait_for_idle(void *handle) return -ETIMEDOUT; } -static int sdma_v3_0_check_soft_reset(void *handle) +static bool sdma_v3_0_check_soft_reset(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; u32 srbm_soft_reset = 0; @@ -1281,14 +1281,12 @@ static int sdma_v3_0_check_soft_reset(void *handle) } if (srbm_soft_reset) { - adev->ip_block_status[AMD_IP_BLOCK_TYPE_SDMA].hang = true; adev->sdma.srbm_soft_reset = srbm_soft_reset; + return true; } else { - adev->ip_block_status[AMD_IP_BLOCK_TYPE_SDMA].hang = false; adev->sdma.srbm_soft_reset = 0; + return false; } - - return 0; } static int sdma_v3_0_pre_soft_reset(void *handle) @@ -1296,7 +1294,7 @@ static int sdma_v3_0_pre_soft_reset(void *handle) struct amdgpu_device *adev = (struct amdgpu_device *)handle; u32 srbm_soft_reset = 0; - if (!adev->ip_block_status[AMD_IP_BLOCK_TYPE_SDMA].hang) + if (!adev->sdma.srbm_soft_reset) return 0; srbm_soft_reset = adev->sdma.srbm_soft_reset; @@ -1315,7 +1313,7 @@ static int sdma_v3_0_post_soft_reset(void *handle) struct amdgpu_device *adev = (struct amdgpu_device *)handle; u32 srbm_soft_reset = 0; - if (!adev->ip_block_status[AMD_IP_BLOCK_TYPE_SDMA].hang) + if (!adev->sdma.srbm_soft_reset) return 0; srbm_soft_reset = adev->sdma.srbm_soft_reset; @@ -1335,7 +1333,7 @@ static int sdma_v3_0_soft_reset(void *handle) u32 srbm_soft_reset = 0; u32 tmp; - if (!adev->ip_block_status[AMD_IP_BLOCK_TYPE_SDMA].hang) + if (!adev->sdma.srbm_soft_reset) return 0; srbm_soft_reset = adev->sdma.srbm_soft_reset; diff --git a/drivers/gpu/drm/amd/amdgpu/tonga_ih.c b/drivers/gpu/drm/amd/amdgpu/tonga_ih.c index d127d59f953a..b4ea229bb449 100644 --- a/drivers/gpu/drm/amd/amdgpu/tonga_ih.c +++ b/drivers/gpu/drm/amd/amdgpu/tonga_ih.c @@ -373,7 +373,7 @@ static int tonga_ih_wait_for_idle(void *handle) return -ETIMEDOUT; } -static int tonga_ih_check_soft_reset(void *handle) +static bool tonga_ih_check_soft_reset(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; u32 srbm_soft_reset = 0; @@ -384,21 +384,19 @@ static int tonga_ih_check_soft_reset(void *handle) SOFT_RESET_IH, 1); if (srbm_soft_reset) { - adev->ip_block_status[AMD_IP_BLOCK_TYPE_IH].hang = true; adev->irq.srbm_soft_reset = srbm_soft_reset; + return true; } else { - adev->ip_block_status[AMD_IP_BLOCK_TYPE_IH].hang = false; adev->irq.srbm_soft_reset = 0; + return false; } - - return 0; } static int tonga_ih_pre_soft_reset(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; - if (!adev->ip_block_status[AMD_IP_BLOCK_TYPE_IH].hang) + if (!adev->irq.srbm_soft_reset) return 0; return tonga_ih_hw_fini(adev); @@ -408,7 +406,7 @@ static int tonga_ih_post_soft_reset(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; - if (!adev->ip_block_status[AMD_IP_BLOCK_TYPE_IH].hang) + if (!adev->irq.srbm_soft_reset) return 0; return tonga_ih_hw_init(adev); @@ -419,7 +417,7 @@ static int tonga_ih_soft_reset(void *handle) struct amdgpu_device *adev = (struct amdgpu_device *)handle; u32 srbm_soft_reset; - if (!adev->ip_block_status[AMD_IP_BLOCK_TYPE_IH].hang) + if (!adev->irq.srbm_soft_reset) return 0; srbm_soft_reset = adev->irq.srbm_soft_reset; diff --git a/drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c b/drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c index e0fd9f21ed95..ab3df6d75656 100644 --- a/drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c +++ b/drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c @@ -770,7 +770,7 @@ static int uvd_v6_0_wait_for_idle(void *handle) } #define AMDGPU_UVD_STATUS_BUSY_MASK 0xfd -static int uvd_v6_0_check_soft_reset(void *handle) +static bool uvd_v6_0_check_soft_reset(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; u32 srbm_soft_reset = 0; @@ -782,19 +782,19 @@ static int uvd_v6_0_check_soft_reset(void *handle) srbm_soft_reset = REG_SET_FIELD(srbm_soft_reset, SRBM_SOFT_RESET, SOFT_RESET_UVD, 1); if (srbm_soft_reset) { - adev->ip_block_status[AMD_IP_BLOCK_TYPE_UVD].hang = true; adev->uvd.srbm_soft_reset = srbm_soft_reset; + return true; } else { - adev->ip_block_status[AMD_IP_BLOCK_TYPE_UVD].hang = false; adev->uvd.srbm_soft_reset = 0; + return false; } - return 0; } + static int uvd_v6_0_pre_soft_reset(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; - if (!adev->ip_block_status[AMD_IP_BLOCK_TYPE_UVD].hang) + if (!adev->uvd.srbm_soft_reset) return 0; uvd_v6_0_stop(adev); @@ -806,7 +806,7 @@ static int uvd_v6_0_soft_reset(void *handle) struct amdgpu_device *adev = (struct amdgpu_device *)handle; u32 srbm_soft_reset; - if (!adev->ip_block_status[AMD_IP_BLOCK_TYPE_UVD].hang) + if (!adev->uvd.srbm_soft_reset) return 0; srbm_soft_reset = adev->uvd.srbm_soft_reset; @@ -836,7 +836,7 @@ static int uvd_v6_0_post_soft_reset(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; - if (!adev->ip_block_status[AMD_IP_BLOCK_TYPE_UVD].hang) + if (!adev->uvd.srbm_soft_reset) return 0; mdelay(5); diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c index 3f6db4ec0102..8533269ec160 100644 --- a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c @@ -561,7 +561,7 @@ static int vce_v3_0_wait_for_idle(void *handle) #define AMDGPU_VCE_STATUS_BUSY_MASK (VCE_STATUS_VCPU_REPORT_AUTO_BUSY_MASK | \ VCE_STATUS_VCPU_REPORT_RB0_BUSY_MASK) -static int vce_v3_0_check_soft_reset(void *handle) +static bool vce_v3_0_check_soft_reset(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; u32 srbm_soft_reset = 0; @@ -591,16 +591,15 @@ static int vce_v3_0_check_soft_reset(void *handle) srbm_soft_reset = REG_SET_FIELD(srbm_soft_reset, SRBM_SOFT_RESET, SOFT_RESET_VCE1, 1); } WREG32_FIELD(GRBM_GFX_INDEX, INSTANCE_INDEX, 0); + mutex_unlock(&adev->grbm_idx_mutex); if (srbm_soft_reset) { - adev->ip_block_status[AMD_IP_BLOCK_TYPE_VCE].hang = true; adev->vce.srbm_soft_reset = srbm_soft_reset; + return true; } else { - adev->ip_block_status[AMD_IP_BLOCK_TYPE_VCE].hang = false; adev->vce.srbm_soft_reset = 0; + return false; } - mutex_unlock(&adev->grbm_idx_mutex); - return 0; } static int vce_v3_0_soft_reset(void *handle) @@ -608,7 +607,7 @@ static int vce_v3_0_soft_reset(void *handle) struct amdgpu_device *adev = (struct amdgpu_device *)handle; u32 srbm_soft_reset; - if (!adev->ip_block_status[AMD_IP_BLOCK_TYPE_VCE].hang) + if (!adev->vce.srbm_soft_reset) return 0; srbm_soft_reset = adev->vce.srbm_soft_reset; @@ -638,7 +637,7 @@ static int vce_v3_0_pre_soft_reset(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; - if (!adev->ip_block_status[AMD_IP_BLOCK_TYPE_VCE].hang) + if (!adev->vce.srbm_soft_reset) return 0; mdelay(5); @@ -651,7 +650,7 @@ static int vce_v3_0_post_soft_reset(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; - if (!adev->ip_block_status[AMD_IP_BLOCK_TYPE_VCE].hang) + if (!adev->vce.srbm_soft_reset) return 0; mdelay(5); diff --git a/drivers/gpu/drm/amd/include/amd_shared.h b/drivers/gpu/drm/amd/include/amd_shared.h index c934b78c9e2f..bec8125bceb0 100644 --- a/drivers/gpu/drm/amd/include/amd_shared.h +++ b/drivers/gpu/drm/amd/include/amd_shared.h @@ -165,7 +165,7 @@ struct amd_ip_funcs { /* poll for idle */ int (*wait_for_idle)(void *handle); /* check soft reset the IP block */ - int (*check_soft_reset)(void *handle); + bool (*check_soft_reset)(void *handle); /* pre soft reset the IP block */ int (*pre_soft_reset)(void *handle); /* soft reset the IP block */ -- cgit v1.2.3 From 3e96dbfd5899c562e08c7ff27e5d5b21bb218e8a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 13 Oct 2016 11:22:17 -0400 Subject: drm/amdgpu: disable smu hw first on tear down Otherwise, you can't disable dpm. Tested-by and Reviewed-by: Rex Zhu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index fda0e57c5e0f..c5e6fc580662 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -1437,6 +1437,30 @@ static int amdgpu_fini(struct amdgpu_device *adev) { int i, r; + /* need to disable SMC first */ + for (i = 0; i < adev->num_ip_blocks; i++) { + if (!adev->ip_block_status[i].hw) + continue; + if (adev->ip_blocks[i].type == AMD_IP_BLOCK_TYPE_SMC) { + /* ungate blocks before hw fini so that we can shutdown the blocks safely */ + r = adev->ip_blocks[i].funcs->set_clockgating_state((void *)adev, + AMD_CG_STATE_UNGATE); + if (r) { + DRM_ERROR("set_clockgating_state(ungate) of IP block <%s> failed %d\n", + adev->ip_blocks[i].funcs->name, r); + return r; + } + r = adev->ip_blocks[i].funcs->hw_fini((void *)adev); + /* XXX handle errors */ + if (r) { + DRM_DEBUG("hw_fini of IP block <%s> failed %d\n", + adev->ip_blocks[i].funcs->name, r); + } + adev->ip_block_status[i].hw = false; + break; + } + } + for (i = adev->num_ip_blocks - 1; i >= 0; i--) { if (!adev->ip_block_status[i].hw) continue; -- cgit v1.2.3 From ca3d28de6268e75739f0c5d40ec6010b1d84f03a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 13 Oct 2016 10:08:00 -0400 Subject: drm/amdgpu/powerplay: implement thermal sensor for CZ/ST Add missing functionality. Reviewed-by: Tom St Denis Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/cz_hwmgr.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/cz_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/cz_hwmgr.c index 7e4fcbbbe086..960424913496 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/cz_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/cz_hwmgr.c @@ -1785,6 +1785,21 @@ static int cz_get_max_high_clocks(struct pp_hwmgr *hwmgr, struct amd_pp_simple_c return 0; } +static int cz_thermal_get_temperature(struct pp_hwmgr *hwmgr) +{ + int actual_temp = 0; + uint32_t val = cgs_read_ind_register(hwmgr->device, + CGS_IND_REG__SMC, ixTHM_TCON_CUR_TMP); + uint32_t temp = PHM_GET_FIELD(val, THM_TCON_CUR_TMP, CUR_TEMP); + + if (PHM_GET_FIELD(val, THM_TCON_CUR_TMP, CUR_TEMP_RANGE_SEL)) + actual_temp = ((temp / 8) - 49) * PP_TEMPERATURE_UNITS_PER_CENTIGRADES; + else + actual_temp = (temp / 8) * PP_TEMPERATURE_UNITS_PER_CENTIGRADES; + + return actual_temp; +} + static int cz_read_sensor(struct pp_hwmgr *hwmgr, int idx, int32_t *value) { struct cz_hwmgr *cz_hwmgr = (struct cz_hwmgr *)(hwmgr->backend); @@ -1881,6 +1896,9 @@ static int cz_read_sensor(struct pp_hwmgr *hwmgr, int idx, int32_t *value) case AMDGPU_PP_SENSOR_VCE_POWER: *value = cz_hwmgr->vce_power_gated ? 0 : 1; return 0; + case AMDGPU_PP_SENSOR_GPU_TEMP: + *value = cz_thermal_get_temperature(hwmgr); + return 0; default: return -EINVAL; } -- cgit v1.2.3 From 154061db8853035deb258b685b8a791cf97f023f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 13 Oct 2016 09:55:47 -0400 Subject: drm/amdgpu/dpm: implement thermal sensor for CZ/ST Previous code was just a copy/paste from KV. Reviewed-by: Tom St Denis Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/cz_dpm.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/cz_dpm.c b/drivers/gpu/drm/amd/amdgpu/cz_dpm.c index f80a0834e889..3c082e143730 100644 --- a/drivers/gpu/drm/amd/amdgpu/cz_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/cz_dpm.c @@ -1514,14 +1514,16 @@ static int cz_dpm_set_powergating_state(void *handle, return 0; } -/* borrowed from KV, need future unify */ static int cz_dpm_get_temperature(struct amdgpu_device *adev) { int actual_temp = 0; - uint32_t temp = RREG32_SMC(0xC0300E0C); + uint32_t val = RREG32_SMC(ixTHM_TCON_CUR_TMP); + uint32_t temp = REG_GET_FIELD(val, THM_TCON_CUR_TMP, CUR_TEMP); - if (temp) + if (REG_GET_FIELD(val, THM_TCON_CUR_TMP, CUR_TEMP_RANGE_SEL)) actual_temp = 1000 * ((temp / 8) - 49); + else + actual_temp = 1000 * (temp / 8); return actual_temp; } -- cgit v1.2.3 From 36c285c5335931d2c67b79e0d0f4e873c858c50d Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Thu, 13 Oct 2016 15:25:09 +0800 Subject: drm/amd/powerplay: notify smu no display by default. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index e7fb8e95436b..1c73ac7c24ba 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -1226,7 +1226,7 @@ int smu7_enable_dpm_tasks(struct pp_hwmgr *hwmgr) PP_ASSERT_WITH_CODE((0 == tmp_result), "Failed to enable VR hot GPIO interrupt!", result = tmp_result); - smum_send_msg_to_smc(hwmgr->smumgr, (PPSMC_Msg)PPSMC_HasDisplay); + smum_send_msg_to_smc(hwmgr->smumgr, (PPSMC_Msg)PPSMC_NoDisplay); tmp_result = smu7_enable_sclk_control(hwmgr); PP_ASSERT_WITH_CODE((0 == tmp_result), -- cgit v1.2.3 From f28a9b65c9e3697ba8d2ab371fae4fea15638676 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Thu, 13 Oct 2016 15:24:12 +0800 Subject: drm/amd/powerplay: fix bug stop dpm can't work on Vi. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- .../drm/amd/powerplay/eventmgr/eventactionchains.c | 1 + drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 39 +++++++++++++--------- 2 files changed, 25 insertions(+), 15 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/eventmgr/eventactionchains.c b/drivers/gpu/drm/amd/powerplay/eventmgr/eventactionchains.c index 92b117843875..8cee4e0f9fde 100644 --- a/drivers/gpu/drm/amd/powerplay/eventmgr/eventactionchains.c +++ b/drivers/gpu/drm/amd/powerplay/eventmgr/eventactionchains.c @@ -49,6 +49,7 @@ static const pem_event_action * const uninitialize_event[] = { uninitialize_display_phy_access_tasks, disable_gfx_voltage_island_power_gating_tasks, disable_gfx_clock_gating_tasks, + uninitialize_thermal_controller_tasks, set_boot_state_tasks, adjust_power_state_tasks, disable_dynamic_state_management_tasks, diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 1c73ac7c24ba..609996c84ad5 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -1030,20 +1030,19 @@ static int smu7_disable_sclk_mclk_dpm(struct pp_hwmgr *hwmgr) struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend); /* disable SCLK dpm */ - if (!data->sclk_dpm_key_disabled) - PP_ASSERT_WITH_CODE( - (smum_send_msg_to_smc(hwmgr->smumgr, - PPSMC_MSG_DPM_Disable) == 0), - "Failed to disable SCLK DPM!", - return -EINVAL); + if (!data->sclk_dpm_key_disabled) { + PP_ASSERT_WITH_CODE(true == smum_is_dpm_running(hwmgr), + "Trying to disable SCLK DPM when DPM is disabled", + return 0); + smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_MSG_DPM_Disable); + } /* disable MCLK dpm */ if (!data->mclk_dpm_key_disabled) { - PP_ASSERT_WITH_CODE( - (smum_send_msg_to_smc(hwmgr->smumgr, - PPSMC_MSG_MCLKDPM_Disable) == 0), - "Failed to disable MCLK DPM!", - return -EINVAL); + PP_ASSERT_WITH_CODE(true == smum_is_dpm_running(hwmgr), + "Trying to disable MCLK DPM when DPM is disabled", + return 0); + smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_MSG_MCLKDPM_Disable); } return 0; @@ -1069,10 +1068,13 @@ static int smu7_stop_dpm(struct pp_hwmgr *hwmgr) return -EINVAL); } - if (smu7_disable_sclk_mclk_dpm(hwmgr)) { - printk(KERN_ERR "Failed to disable Sclk DPM and Mclk DPM!"); - return -EINVAL; - } + smu7_disable_sclk_mclk_dpm(hwmgr); + + PP_ASSERT_WITH_CODE(true == smum_is_dpm_running(hwmgr), + "Trying to disable voltage DPM when DPM is disabled", + return 0); + + smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_MSG_Voltage_Cntl_Disable); return 0; } @@ -1306,6 +1308,12 @@ int smu7_disable_dpm_tasks(struct pp_hwmgr *hwmgr) PP_ASSERT_WITH_CODE((tmp_result == 0), "Failed to disable thermal auto throttle!", result = tmp_result); + if (1 == PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, FEATURE_STATUS, AVS_ON)) { + PP_ASSERT_WITH_CODE((0 == smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_MSG_DisableAvfs)), + "Failed to disable AVFS!", + return -EINVAL); + } + tmp_result = smu7_stop_dpm(hwmgr); PP_ASSERT_WITH_CODE((tmp_result == 0), "Failed to stop DPM!", result = tmp_result); @@ -4328,6 +4336,7 @@ static const struct pp_hwmgr_func smu7_hwmgr_funcs = { .set_mclk_od = smu7_set_mclk_od, .get_clock_by_type = smu7_get_clock_by_type, .read_sensor = smu7_read_sensor, + .dynamic_state_management_disable = smu7_disable_dpm_tasks, }; uint8_t smu7_get_sleep_divider_id_from_clock(uint32_t clock, -- cgit v1.2.3 From 5647b25c3335a25ba32d73e61850a374a708788a Mon Sep 17 00:00:00 2001 From: Jonathan Liu Date: Mon, 26 Sep 2016 20:21:45 +1000 Subject: drm/sun4i: rgb: Enable panel after controller The panel should be enabled after the controller so that we do not have visual glitches on the panel while the controller is setup. Similarly, the panel should be disabled before the controller. Signed-off-by: Jonathan Liu Reviewed-by: Sean Paul Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_rgb.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/sun4i/sun4i_rgb.c b/drivers/gpu/drm/sun4i/sun4i_rgb.c index c3ff10f559cc..4e4bea6f395c 100644 --- a/drivers/gpu/drm/sun4i/sun4i_rgb.c +++ b/drivers/gpu/drm/sun4i/sun4i_rgb.c @@ -152,15 +152,16 @@ static void sun4i_rgb_encoder_enable(struct drm_encoder *encoder) DRM_DEBUG_DRIVER("Enabling RGB output\n"); - if (!IS_ERR(tcon->panel)) { + if (!IS_ERR(tcon->panel)) drm_panel_prepare(tcon->panel); - drm_panel_enable(tcon->panel); - } /* encoder->bridge can be NULL; drm_bridge_enable checks for it */ drm_bridge_enable(encoder->bridge); sun4i_tcon_channel_enable(tcon, 0); + + if (!IS_ERR(tcon->panel)) + drm_panel_enable(tcon->panel); } static void sun4i_rgb_encoder_disable(struct drm_encoder *encoder) @@ -171,15 +172,16 @@ static void sun4i_rgb_encoder_disable(struct drm_encoder *encoder) DRM_DEBUG_DRIVER("Disabling RGB output\n"); + if (!IS_ERR(tcon->panel)) + drm_panel_disable(tcon->panel); + sun4i_tcon_channel_disable(tcon, 0); /* encoder->bridge can be NULL; drm_bridge_disable checks for it */ drm_bridge_disable(encoder->bridge); - if (!IS_ERR(tcon->panel)) { - drm_panel_disable(tcon->panel); + if (!IS_ERR(tcon->panel)) drm_panel_unprepare(tcon->panel); - } } static void sun4i_rgb_encoder_mode_set(struct drm_encoder *encoder, -- cgit v1.2.3 From 0df03b43035afd0a64916fe4e5bca978562ffa5a Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 29 Sep 2016 14:05:05 +0200 Subject: drm/sun4i: rgb: Remove the bridge enable/disable functions The atomic helpers already call the drm_bridge_enable on our behalf, there's no need to do it a second time. Reported-by: Sean Paul Reviewed-by: Sean Paul Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_rgb.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/sun4i/sun4i_rgb.c b/drivers/gpu/drm/sun4i/sun4i_rgb.c index 4e4bea6f395c..d198ad7e5323 100644 --- a/drivers/gpu/drm/sun4i/sun4i_rgb.c +++ b/drivers/gpu/drm/sun4i/sun4i_rgb.c @@ -155,9 +155,6 @@ static void sun4i_rgb_encoder_enable(struct drm_encoder *encoder) if (!IS_ERR(tcon->panel)) drm_panel_prepare(tcon->panel); - /* encoder->bridge can be NULL; drm_bridge_enable checks for it */ - drm_bridge_enable(encoder->bridge); - sun4i_tcon_channel_enable(tcon, 0); if (!IS_ERR(tcon->panel)) @@ -177,9 +174,6 @@ static void sun4i_rgb_encoder_disable(struct drm_encoder *encoder) sun4i_tcon_channel_disable(tcon, 0); - /* encoder->bridge can be NULL; drm_bridge_disable checks for it */ - drm_bridge_disable(encoder->bridge); - if (!IS_ERR(tcon->panel)) drm_panel_unprepare(tcon->panel); } -- cgit v1.2.3 From fa860a1751e388385a7f249dd3f24a6c76db0ba9 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 13 Oct 2016 16:13:44 +0200 Subject: drm: Print device information again in debugfs I was a bit over-eager in my cleanup in commit 95c081c17f284de50eaca60d4d55643a64d39019 Author: Daniel Vetter Date: Tue Jun 21 10:54:12 2016 +0200 drm: Move master pointer from drm_minor to drm_device Noticed by Chris Wilson. Fixes: 95c081c17f28 ("drm: Move master pointer from drm_minor to drm_device") Cc: Chris Wilson Cc: Chris Wilson Cc: Daniel Vetter Cc: Emil Velikov Cc: Julia Lawall Signed-off-by: Daniel Vetter Reviewed-by: Alex Deucher Tested-by: Chris Wilson Reviewed-by: Emil Velikov Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_info.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/drm_info.c b/drivers/gpu/drm/drm_info.c index 1df2d33d0b40..ffb2ab389d1d 100644 --- a/drivers/gpu/drm/drm_info.c +++ b/drivers/gpu/drm/drm_info.c @@ -54,9 +54,6 @@ int drm_name_info(struct seq_file *m, void *data) mutex_lock(&dev->master_mutex); master = dev->master; - if (!master) - goto out_unlock; - seq_printf(m, "%s", dev->driver->name); if (dev->dev) seq_printf(m, " dev=%s", dev_name(dev->dev)); @@ -65,7 +62,6 @@ int drm_name_info(struct seq_file *m, void *data) if (dev->unique) seq_printf(m, " unique=%s", dev->unique); seq_printf(m, "\n"); -out_unlock: mutex_unlock(&dev->master_mutex); return 0; -- cgit v1.2.3 From 3e3affe549ebd228501d160886c1b3999d99e0c6 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 22 Sep 2016 11:50:52 +0200 Subject: drm/imx: hide an unused label The imx_drm_bind function causes a warning in linux-next when CONFIG_DRM_FBDEV_EMULATION is not set: drivers/gpu/drm/imx/imx-drm-core.c: In function 'imx_drm_bind': drivers/gpu/drm/imx/imx-drm-core.c:441:1: error: label 'err_unbind' defined but not used [-Werror=unused-label] I don't understand why the warning only showed up now, as the code has not been modified recently, but there is an obvious fix in adding another #if for the symbol. Signed-off-by: Arnd Bergmann Fixes: c1ff5a7aa3c3 ("drm/imx: Remove local fbdev emulation Kconfig option") Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-drm-core.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/imx/imx-drm-core.c b/drivers/gpu/drm/imx/imx-drm-core.c index 98df09c2b388..b084c571b23f 100644 --- a/drivers/gpu/drm/imx/imx-drm-core.c +++ b/drivers/gpu/drm/imx/imx-drm-core.c @@ -436,9 +436,11 @@ static int imx_drm_bind(struct device *dev) err_fbhelper: drm_kms_helper_poll_fini(drm); +#if IS_ENABLED(CONFIG_DRM_FBDEV_EMULATION) if (imxdrm->fbhelper) drm_fbdev_cma_fini(imxdrm->fbhelper); err_unbind: +#endif component_unbind_all(drm->dev, drm); err_vblank: drm_vblank_cleanup(drm); -- cgit v1.2.3 From 43daa01323da37a3692cabe1579ef5c2c4372e06 Mon Sep 17 00:00:00 2001 From: Liu Ying Date: Mon, 10 Oct 2016 14:50:06 +0800 Subject: drm/imx: ipuv3-plane: Switch EBA buffer only when we don't need modeset We added active plane reconfiguration support by forcing a full modeset operation. So, looking at old_plane_state->fb to determine whether we need to switch EBA buffer(for hardware double buffering) in ipu_plane_atomic_set_base() or not is no more correct. Instead, we should do that only when we don't need modeset, otherwise, we initialize the two EBA buffers with the buffer address. Fixes: c6c1f9bc798b ("drm/imx: Add active plane reconfiguration support") Cc: stable@vger.kernel.org # 4.8 Signed-off-by: Liu Ying Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/ipuv3-plane.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c index ce22d0a0ddc8..f5861d9b0df7 100644 --- a/drivers/gpu/drm/imx/ipuv3-plane.c +++ b/drivers/gpu/drm/imx/ipuv3-plane.c @@ -108,6 +108,7 @@ static void ipu_plane_atomic_set_base(struct ipu_plane *ipu_plane, { struct drm_plane *plane = &ipu_plane->base; struct drm_plane_state *state = plane->state; + struct drm_crtc_state *crtc_state = state->crtc->state; struct drm_framebuffer *fb = state->fb; unsigned long eba, ubo, vbo; int active; @@ -149,7 +150,7 @@ static void ipu_plane_atomic_set_base(struct ipu_plane *ipu_plane, break; } - if (old_state->fb) { + if (!drm_atomic_crtc_needs_modeset(crtc_state)) { active = ipu_idmac_get_current_buffer(ipu_plane->ipu_ch); ipu_cpmem_set_buffer(ipu_plane->ipu_ch, !active, eba); ipu_idmac_select_buffer(ipu_plane->ipu_ch, !active); -- cgit v1.2.3 From 81d553545a1510ff7c7c00cbc9b57d6172d411a4 Mon Sep 17 00:00:00 2001 From: Liu Ying Date: Mon, 10 Oct 2016 14:50:07 +0800 Subject: drm/imx: ipuv3-plane: Skip setting u/vbo only when we don't need modeset We added active plane reconfiguration support by forcing a full modeset operation. So, looking at old_plane_state->fb to determine whether we need to set u/v offset(aka, u/vbo for IPUv3) in ipu_plane_atomic_set_base() or not is no more correct. Instead, we should do that only when we don't need modeset. Fixes: c6c1f9bc798b ("drm/imx: Add active plane reconfiguration support") Cc: stable@vger.kernel.org # 4.8 Signed-off-by: Liu Ying Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/ipuv3-plane.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c index f5861d9b0df7..cfb34b595d15 100644 --- a/drivers/gpu/drm/imx/ipuv3-plane.c +++ b/drivers/gpu/drm/imx/ipuv3-plane.c @@ -103,8 +103,7 @@ drm_plane_state_to_vbo(struct drm_plane_state *state) (state->src_x >> 16) / 2 - eba; } -static void ipu_plane_atomic_set_base(struct ipu_plane *ipu_plane, - struct drm_plane_state *old_state) +static void ipu_plane_atomic_set_base(struct ipu_plane *ipu_plane) { struct drm_plane *plane = &ipu_plane->base; struct drm_plane_state *state = plane->state; @@ -118,7 +117,7 @@ static void ipu_plane_atomic_set_base(struct ipu_plane *ipu_plane, switch (fb->pixel_format) { case DRM_FORMAT_YUV420: case DRM_FORMAT_YVU420: - if (old_state->fb) + if (!drm_atomic_crtc_needs_modeset(crtc_state)) break; /* @@ -393,7 +392,7 @@ static void ipu_plane_atomic_update(struct drm_plane *plane, struct drm_crtc_state *crtc_state = state->crtc->state; if (!drm_atomic_crtc_needs_modeset(crtc_state)) { - ipu_plane_atomic_set_base(ipu_plane, old_state); + ipu_plane_atomic_set_base(ipu_plane); return; } } @@ -438,7 +437,7 @@ static void ipu_plane_atomic_update(struct drm_plane *plane, ipu_cpmem_set_high_priority(ipu_plane->ipu_ch); ipu_idmac_set_double_buffer(ipu_plane->ipu_ch, 1); ipu_cpmem_set_stride(ipu_plane->ipu_ch, state->fb->pitches[0]); - ipu_plane_atomic_set_base(ipu_plane, old_state); + ipu_plane_atomic_set_base(ipu_plane); ipu_plane_enable(ipu_plane); } -- cgit v1.2.3 From 8cca354816adacb91280e19c50f81ffddc0460a4 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 13 Oct 2016 11:53:21 +0300 Subject: drm/imx: drm_dev_alloc() returns error pointers We are checking for NULL here, when we should be checking for error pointers. Fixes: 54db5decce17 ("drm/imx: drop deprecated load/unload drm_driver ops") Signed-off-by: Dan Carpenter Reviewed-by: Lucas Stach Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-drm-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/imx/imx-drm-core.c b/drivers/gpu/drm/imx/imx-drm-core.c index b084c571b23f..9672b579f950 100644 --- a/drivers/gpu/drm/imx/imx-drm-core.c +++ b/drivers/gpu/drm/imx/imx-drm-core.c @@ -357,8 +357,8 @@ static int imx_drm_bind(struct device *dev) int ret; drm = drm_dev_alloc(&imx_drm_driver, dev); - if (!drm) - return -ENOMEM; + if (IS_ERR(drm)) + return PTR_ERR(drm); imxdrm = devm_kzalloc(dev, sizeof(*imxdrm), GFP_KERNEL); if (!imxdrm) { -- cgit v1.2.3 From e73aca5184ad9fc948ba22b4d35dce11db35bb25 Mon Sep 17 00:00:00 2001 From: Liu Ying Date: Tue, 18 Oct 2016 16:44:03 +0800 Subject: drm/imx: ipuv3-plane: Access old u/vbo properly in ->atomic_check for YU12/YV12 Before accessing the u/v offset(aka, u/vbo for IPUv3) of the old plane state's relevant fb, we should make sure the fb is in YU12 or YV12 pixel format(which are the two YUV pixel formats we support only), otherwise, we are likely to trigger BUG_ON() in drm_plane_state_to_u/vbo() since the fb's pixel format is probably not YU12 or YV12. Link: https://bugs.freedesktop.org/show_bug.cgi?id=98150 Fixes: c6c1f9bc798b ("drm/imx: Add active plane reconfiguration support") Cc: stable@vger.kernel.org # 4.8 Signed-off-by: Liu Ying Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/ipuv3-plane.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c index cfb34b595d15..5c342997863e 100644 --- a/drivers/gpu/drm/imx/ipuv3-plane.c +++ b/drivers/gpu/drm/imx/ipuv3-plane.c @@ -355,7 +355,9 @@ static int ipu_plane_atomic_check(struct drm_plane *plane, if ((ubo > 0xfffff8) || (vbo > 0xfffff8)) return -EINVAL; - if (old_fb) { + if (old_fb && + (old_fb->pixel_format == DRM_FORMAT_YUV420 || + old_fb->pixel_format == DRM_FORMAT_YVU420)) { old_ubo = drm_plane_state_to_ubo(old_state); old_vbo = drm_plane_state_to_vbo(old_state); if (ubo != old_ubo || vbo != old_vbo) -- cgit v1.2.3 From 83ba62bc700bab710b22be3a1bf6cf973f754273 Mon Sep 17 00:00:00 2001 From: Bibby Hsieh Date: Tue, 18 Oct 2016 16:23:59 +0800 Subject: drm/mediatek: fix a typo of OD_CFG to OD_RELAYMODE If we want to set the hardware OD to relay mode, we have to set OD_CFG register rather than OD_RELAYMODE; otherwise, the system will access the wrong address. Fixes: 7216436420414144646f5d8343d061355fd23483 ("drm/mediatek: set mt8173 dithering function") Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Bibby Hsieh Acked-by: CK Hu --- drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c index df33b3ca6ffd..aa5f20fabd10 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c @@ -123,7 +123,7 @@ static void mtk_od_config(struct mtk_ddp_comp *comp, unsigned int w, unsigned int bpc) { writel(w << 16 | h, comp->regs + DISP_OD_SIZE); - writel(OD_RELAYMODE, comp->regs + OD_RELAYMODE); + writel(OD_RELAYMODE, comp->regs + OD_CFG); mtk_dither_set(comp, bpc, DISP_OD_CFG); } -- cgit v1.2.3 From f752fff611b99f5679224f3990a1f531ea64b1ec Mon Sep 17 00:00:00 2001 From: Bibby Hsieh Date: Thu, 29 Sep 2016 11:29:48 +0800 Subject: drm/mediatek: set vblank_disable_allowed to true MTK DRM driver didn't set the vblank_disable_allowed to true, it cause that the irq_handler is called every 16.6 ms (every vblank) when the display didn't be updated. Signed-off-by: Bibby Hsieh Acked-by: CK Hu --- drivers/gpu/drm/mediatek/mtk_drm_drv.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c index cf83f6507ec8..0b2ae47eb52c 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c @@ -217,6 +217,7 @@ static int mtk_drm_kms_init(struct drm_device *drm) if (ret < 0) goto err_component_unbind; + drm->vblank_disable_allowed = true; drm_kms_helper_poll_init(drm); drm_mode_config_reset(drm); -- cgit v1.2.3 From 56e4b1e183555c74097fa012f1606b22223f027b Mon Sep 17 00:00:00 2001 From: Bibby Hsieh Date: Thu, 29 Sep 2016 11:29:49 +0800 Subject: drm/mediatek: clear IRQ status before enable OVL interrupt To make sure that the first vblank IRQ after enabling vblank isn't too short or immediate, we have to clear the IRQ status before enable OVL interrupt. Signed-off-by: Bibby Hsieh Acked-by: CK Hu --- drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c index 019b7ca392d7..f75c5b5a536c 100644 --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c @@ -80,6 +80,7 @@ static void mtk_ovl_enable_vblank(struct mtk_ddp_comp *comp, ddp_comp); priv->crtc = crtc; + writel(0x0, comp->regs + DISP_REG_OVL_INTSTA); writel_relaxed(OVL_FME_CPL_INT, comp->regs + DISP_REG_OVL_INTEN); } -- cgit v1.2.3 From d542b7c473f0eb34455974d66ea93653b3eb40ce Mon Sep 17 00:00:00 2001 From: Junzhi Zhao Date: Thu, 29 Sep 2016 11:02:13 +0800 Subject: drm/mediatek: do mtk_hdmi_send_infoframe after HDMI clock enable The mtk_hdmi_send_infoframe have to be run after PLL and PIXEL clock of HDMI enable. Make sure that HDMI inforframes can be sent successfully. Signed-off-by: Junzhi Zhao Signed-off-by: Bibby Hsieh --- drivers/gpu/drm/mediatek/mtk_hdmi.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c index 71227deef21b..0e8c4d9af340 100644 --- a/drivers/gpu/drm/mediatek/mtk_hdmi.c +++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c @@ -1133,12 +1133,6 @@ static int mtk_hdmi_output_set_display_mode(struct mtk_hdmi *hdmi, phy_power_on(hdmi->phy); mtk_hdmi_aud_output_config(hdmi, mode); - mtk_hdmi_setup_audio_infoframe(hdmi); - mtk_hdmi_setup_avi_infoframe(hdmi, mode); - mtk_hdmi_setup_spd_infoframe(hdmi, "mediatek", "On-chip HDMI"); - if (mode->flags & DRM_MODE_FLAG_3D_MASK) - mtk_hdmi_setup_vendor_specific_infoframe(hdmi, mode); - mtk_hdmi_hw_vid_black(hdmi, false); mtk_hdmi_hw_aud_unmute(hdmi); mtk_hdmi_hw_send_av_unmute(hdmi); @@ -1401,6 +1395,16 @@ static void mtk_hdmi_bridge_pre_enable(struct drm_bridge *bridge) hdmi->powered = true; } +static void mtk_hdmi_send_infoframe(struct mtk_hdmi *hdmi, + struct drm_display_mode *mode) +{ + mtk_hdmi_setup_audio_infoframe(hdmi); + mtk_hdmi_setup_avi_infoframe(hdmi, mode); + mtk_hdmi_setup_spd_infoframe(hdmi, "mediatek", "On-chip HDMI"); + if (mode->flags & DRM_MODE_FLAG_3D_MASK) + mtk_hdmi_setup_vendor_specific_infoframe(hdmi, mode); +} + static void mtk_hdmi_bridge_enable(struct drm_bridge *bridge) { struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge); @@ -1409,6 +1413,7 @@ static void mtk_hdmi_bridge_enable(struct drm_bridge *bridge) clk_prepare_enable(hdmi->clk[MTK_HDMI_CLK_HDMI_PLL]); clk_prepare_enable(hdmi->clk[MTK_HDMI_CLK_HDMI_PIXEL]); phy_power_on(hdmi->phy); + mtk_hdmi_send_infoframe(hdmi, &hdmi->mode); hdmi->enabled = true; } -- cgit v1.2.3 From 968253bd7caae5621f6806dd5055353fe33d366e Mon Sep 17 00:00:00 2001 From: Junzhi Zhao Date: Thu, 29 Sep 2016 11:02:14 +0800 Subject: drm/mediatek: enhance the HDMI driving current In order to improve 4K resolution performance, we have to enhance the HDMI driving current when clock rate is greater than 165MHz. Signed-off-by: Junzhi Zhao Signed-off-by: Bibby Hsieh --- drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c | 42 ++++++++++++++++++-------- 1 file changed, 30 insertions(+), 12 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c index 8a24754b440f..51cb9cfb6646 100644 --- a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c +++ b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c @@ -265,6 +265,9 @@ static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate, struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw); unsigned int pre_div; unsigned int div; + unsigned int pre_ibias; + unsigned int hdmi_ibias; + unsigned int imp_en; dev_dbg(hdmi_phy->dev, "%s: %lu Hz, parent: %lu Hz\n", __func__, rate, parent_rate); @@ -298,18 +301,31 @@ static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate, (0x1 << PLL_BR_SHIFT), RG_HDMITX_PLL_BP | RG_HDMITX_PLL_BC | RG_HDMITX_PLL_BR); - mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON3, RG_HDMITX_PRD_IMP_EN); + if (rate < 165000000) { + mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON3, + RG_HDMITX_PRD_IMP_EN); + pre_ibias = 0x3; + imp_en = 0x0; + hdmi_ibias = hdmi_phy->ibias; + } else { + mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON3, + RG_HDMITX_PRD_IMP_EN); + pre_ibias = 0x6; + imp_en = 0xf; + hdmi_ibias = hdmi_phy->ibias_up; + } mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON4, - (0x3 << PRD_IBIAS_CLK_SHIFT) | - (0x3 << PRD_IBIAS_D2_SHIFT) | - (0x3 << PRD_IBIAS_D1_SHIFT) | - (0x3 << PRD_IBIAS_D0_SHIFT), + (pre_ibias << PRD_IBIAS_CLK_SHIFT) | + (pre_ibias << PRD_IBIAS_D2_SHIFT) | + (pre_ibias << PRD_IBIAS_D1_SHIFT) | + (pre_ibias << PRD_IBIAS_D0_SHIFT), RG_HDMITX_PRD_IBIAS_CLK | RG_HDMITX_PRD_IBIAS_D2 | RG_HDMITX_PRD_IBIAS_D1 | RG_HDMITX_PRD_IBIAS_D0); mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON3, - (0x0 << DRV_IMP_EN_SHIFT), RG_HDMITX_DRV_IMP_EN); + (imp_en << DRV_IMP_EN_SHIFT), + RG_HDMITX_DRV_IMP_EN); mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (hdmi_phy->drv_imp_clk << DRV_IMP_CLK_SHIFT) | (hdmi_phy->drv_imp_d2 << DRV_IMP_D2_SHIFT) | @@ -318,12 +334,14 @@ static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate, RG_HDMITX_DRV_IMP_CLK | RG_HDMITX_DRV_IMP_D2 | RG_HDMITX_DRV_IMP_D1 | RG_HDMITX_DRV_IMP_D0); mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON5, - (hdmi_phy->ibias << DRV_IBIAS_CLK_SHIFT) | - (hdmi_phy->ibias << DRV_IBIAS_D2_SHIFT) | - (hdmi_phy->ibias << DRV_IBIAS_D1_SHIFT) | - (hdmi_phy->ibias << DRV_IBIAS_D0_SHIFT), - RG_HDMITX_DRV_IBIAS_CLK | RG_HDMITX_DRV_IBIAS_D2 | - RG_HDMITX_DRV_IBIAS_D1 | RG_HDMITX_DRV_IBIAS_D0); + (hdmi_ibias << DRV_IBIAS_CLK_SHIFT) | + (hdmi_ibias << DRV_IBIAS_D2_SHIFT) | + (hdmi_ibias << DRV_IBIAS_D1_SHIFT) | + (hdmi_ibias << DRV_IBIAS_D0_SHIFT), + RG_HDMITX_DRV_IBIAS_CLK | + RG_HDMITX_DRV_IBIAS_D2 | + RG_HDMITX_DRV_IBIAS_D1 | + RG_HDMITX_DRV_IBIAS_D0); return 0; } -- cgit v1.2.3 From 0d2200794f0a2c1ebb3b6613842914d8ce4b67f9 Mon Sep 17 00:00:00 2001 From: Junzhi Zhao Date: Thu, 29 Sep 2016 11:02:15 +0800 Subject: drm/mediatek: modify the factor to make the pll_rate set in the 1G-2G range Currently, the code sets the "pll" to the desired multiple of the pixel clock manully(4*3m 8*3,etc). The valid range of the pll is 1G-2G, however, when the pixel clock is bigger than 167MHz, the "pll" will be set to a invalid value( > 2G), then the "pll" will be 2GHz, thus the pixel clock will be in correct. Change the factor to make the "pll" be set in the (1G, 2G) range. Signed-off-by: Junzhi Zhao Signed-off-by: Bibby Hsieh --- drivers/gpu/drm/mediatek/mtk_dpi.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c index 0186e500d2a5..90fb831ef031 100644 --- a/drivers/gpu/drm/mediatek/mtk_dpi.c +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c @@ -432,11 +432,16 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, unsigned long pll_rate; unsigned int factor; + /* let pll_rate can fix the valid range of tvdpll (1G~2GHz) */ pix_rate = 1000UL * mode->clock; - if (mode->clock <= 74000) + if (mode->clock <= 27000) + factor = 16 * 3; + else if (mode->clock <= 84000) factor = 8 * 3; - else + else if (mode->clock <= 167000) factor = 4 * 3; + else + factor = 2 * 3; pll_rate = pix_rate * factor; dev_dbg(dpi->dev, "Want PLL %lu Hz, pixel clock %lu Hz\n", -- cgit v1.2.3 From 7f23b3504a0df63b724180262c5f3f117f21bcae Mon Sep 17 00:00:00 2001 From: Lorenzo Stoakes Date: Thu, 13 Oct 2016 01:20:15 +0100 Subject: mm: replace get_vaddr_frames() write/force parameters with gup_flags This removes the 'write' and 'force' from get_vaddr_frames() and replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers as use of this flag can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: Lorenzo Stoakes Acked-by: Michal Hocko Reviewed-by: Jan Kara Signed-off-by: Linus Torvalds --- drivers/gpu/drm/exynos/exynos_drm_g2d.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index aa92decf4233..fbd13fabdf2d 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -488,7 +488,8 @@ static dma_addr_t *g2d_userptr_get_dma_addr(struct drm_device *drm_dev, goto err_free; } - ret = get_vaddr_frames(start, npages, true, true, g2d_userptr->vec); + ret = get_vaddr_frames(start, npages, FOLL_FORCE | FOLL_WRITE, + g2d_userptr->vec); if (ret != npages) { DRM_ERROR("failed to get user pages from userptr.\n"); if (ret < 0) -- cgit v1.2.3 From 768ae309a96103ed02eb1e111e838c87854d8b51 Mon Sep 17 00:00:00 2001 From: Lorenzo Stoakes Date: Thu, 13 Oct 2016 01:20:16 +0100 Subject: mm: replace get_user_pages() write/force parameters with gup_flags MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This removes the 'write' and 'force' from get_user_pages() and replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers as use of this flag can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: Lorenzo Stoakes Acked-by: Christian König Acked-by: Jesper Nilsson Acked-by: Michal Hocko Reviewed-by: Jan Kara Signed-off-by: Linus Torvalds --- drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 7 +++++-- drivers/gpu/drm/radeon/radeon_ttm.c | 3 ++- drivers/gpu/drm/via/via_dmablit.c | 4 ++-- 3 files changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c index 887483b8b818..dcaf691f56b5 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c @@ -555,10 +555,13 @@ struct amdgpu_ttm_tt { int amdgpu_ttm_tt_get_user_pages(struct ttm_tt *ttm, struct page **pages) { struct amdgpu_ttm_tt *gtt = (void *)ttm; - int write = !(gtt->userflags & AMDGPU_GEM_USERPTR_READONLY); + unsigned int flags = 0; unsigned pinned = 0; int r; + if (!(gtt->userflags & AMDGPU_GEM_USERPTR_READONLY)) + flags |= FOLL_WRITE; + if (gtt->userflags & AMDGPU_GEM_USERPTR_ANONONLY) { /* check that we only use anonymous memory to prevent problems with writeback */ @@ -581,7 +584,7 @@ int amdgpu_ttm_tt_get_user_pages(struct ttm_tt *ttm, struct page **pages) list_add(&guptask.list, >t->guptasks); spin_unlock(>t->guptasklock); - r = get_user_pages(userptr, num_pages, write, 0, p, NULL); + r = get_user_pages(userptr, num_pages, flags, p, NULL); spin_lock(>t->guptasklock); list_del(&guptask.list); diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index 455268214b89..3de5e6e21662 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -566,7 +566,8 @@ static int radeon_ttm_tt_pin_userptr(struct ttm_tt *ttm) uint64_t userptr = gtt->userptr + pinned * PAGE_SIZE; struct page **pages = ttm->pages + pinned; - r = get_user_pages(userptr, num_pages, write, 0, pages, NULL); + r = get_user_pages(userptr, num_pages, write ? FOLL_WRITE : 0, + pages, NULL); if (r < 0) goto release_pages; diff --git a/drivers/gpu/drm/via/via_dmablit.c b/drivers/gpu/drm/via/via_dmablit.c index 7e2a12c4fed2..1a3ad769f8c8 100644 --- a/drivers/gpu/drm/via/via_dmablit.c +++ b/drivers/gpu/drm/via/via_dmablit.c @@ -241,8 +241,8 @@ via_lock_all_dma_pages(drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer) down_read(¤t->mm->mmap_sem); ret = get_user_pages((unsigned long)xfer->mem_addr, vsg->num_pages, - (vsg->direction == DMA_FROM_DEVICE), - 0, vsg->pages, NULL); + (vsg->direction == DMA_FROM_DEVICE) ? FOLL_WRITE : 0, + vsg->pages, NULL); up_read(¤t->mm->mmap_sem); if (ret != vsg->num_pages) { -- cgit v1.2.3 From 9beae1ea89305a9667ceaab6d0bf46a045ad71e7 Mon Sep 17 00:00:00 2001 From: Lorenzo Stoakes Date: Thu, 13 Oct 2016 01:20:17 +0100 Subject: mm: replace get_user_pages_remote() write/force parameters with gup_flags This removes the 'write' and 'force' from get_user_pages_remote() and replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers as use of this flag can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: Lorenzo Stoakes Acked-by: Michal Hocko Reviewed-by: Jan Kara Signed-off-by: Linus Torvalds --- drivers/gpu/drm/etnaviv/etnaviv_gem.c | 7 +++++-- drivers/gpu/drm/i915/i915_gem_userptr.c | 6 +++++- 2 files changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gem.c b/drivers/gpu/drm/etnaviv/etnaviv_gem.c index 5ce3603e6eac..0370b842d9cc 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gem.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_gem.c @@ -748,19 +748,22 @@ static struct page **etnaviv_gem_userptr_do_get_pages( int ret = 0, pinned, npages = etnaviv_obj->base.size >> PAGE_SHIFT; struct page **pvec; uintptr_t ptr; + unsigned int flags = 0; pvec = drm_malloc_ab(npages, sizeof(struct page *)); if (!pvec) return ERR_PTR(-ENOMEM); + if (!etnaviv_obj->userptr.ro) + flags |= FOLL_WRITE; + pinned = 0; ptr = etnaviv_obj->userptr.ptr; down_read(&mm->mmap_sem); while (pinned < npages) { ret = get_user_pages_remote(task, mm, ptr, npages - pinned, - !etnaviv_obj->userptr.ro, 0, - pvec + pinned, NULL); + flags, pvec + pinned, NULL); if (ret < 0) break; diff --git a/drivers/gpu/drm/i915/i915_gem_userptr.c b/drivers/gpu/drm/i915/i915_gem_userptr.c index e537930c64b5..c6f780f5abc9 100644 --- a/drivers/gpu/drm/i915/i915_gem_userptr.c +++ b/drivers/gpu/drm/i915/i915_gem_userptr.c @@ -508,6 +508,10 @@ __i915_gem_userptr_get_pages_worker(struct work_struct *_work) pvec = drm_malloc_gfp(npages, sizeof(struct page *), GFP_TEMPORARY); if (pvec != NULL) { struct mm_struct *mm = obj->userptr.mm->mm; + unsigned int flags = 0; + + if (!obj->userptr.read_only) + flags |= FOLL_WRITE; ret = -EFAULT; if (atomic_inc_not_zero(&mm->mm_users)) { @@ -517,7 +521,7 @@ __i915_gem_userptr_get_pages_worker(struct work_struct *_work) (work->task, mm, obj->userptr.ptr + pinned * PAGE_SIZE, npages - pinned, - !obj->userptr.read_only, 0, + flags, pvec + pinned, NULL); if (ret < 0) break; -- cgit v1.2.3 From 8dedefbc38172f3fcb43a26b6d0e394dcb1ee562 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Tue, 4 Oct 2016 16:40:14 -0700 Subject: drm/fsl-dcu: enable TCON bypass mode by default Do not use encoder disable/enable callbacks to control bypass mode as this seems to mess with the signals not liked by displays. This also makes more sense since the encoder is already defined to be parallel RGB/LVDS at creation time. Signed-off-by: Stefan Agner Tested-By: Meng Yi --- drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 2 ++ drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c | 39 ++++--------------------------- 2 files changed, 7 insertions(+), 34 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c index 0884c45aefe8..3897f5671776 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c @@ -273,6 +273,8 @@ static int fsl_dcu_drm_pm_resume(struct device *dev) goto disable_dcu_clk; } + if (fsl_dev->tcon) + fsl_tcon_bypass_enable(fsl_dev->tcon); fsl_dcu_drm_init_planes(fsl_dev->drm); drm_atomic_helper_resume(fsl_dev->drm, fsl_dev->state); diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c index 26edcc899712..e1dd75b18118 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c @@ -20,38 +20,6 @@ #include "fsl_dcu_drm_drv.h" #include "fsl_tcon.h" -static int -fsl_dcu_drm_encoder_atomic_check(struct drm_encoder *encoder, - struct drm_crtc_state *crtc_state, - struct drm_connector_state *conn_state) -{ - return 0; -} - -static void fsl_dcu_drm_encoder_disable(struct drm_encoder *encoder) -{ - struct drm_device *dev = encoder->dev; - struct fsl_dcu_drm_device *fsl_dev = dev->dev_private; - - if (fsl_dev->tcon) - fsl_tcon_bypass_disable(fsl_dev->tcon); -} - -static void fsl_dcu_drm_encoder_enable(struct drm_encoder *encoder) -{ - struct drm_device *dev = encoder->dev; - struct fsl_dcu_drm_device *fsl_dev = dev->dev_private; - - if (fsl_dev->tcon) - fsl_tcon_bypass_enable(fsl_dev->tcon); -} - -static const struct drm_encoder_helper_funcs encoder_helper_funcs = { - .atomic_check = fsl_dcu_drm_encoder_atomic_check, - .disable = fsl_dcu_drm_encoder_disable, - .enable = fsl_dcu_drm_encoder_enable, -}; - static void fsl_dcu_drm_encoder_destroy(struct drm_encoder *encoder) { drm_encoder_cleanup(encoder); @@ -68,13 +36,16 @@ int fsl_dcu_drm_encoder_create(struct fsl_dcu_drm_device *fsl_dev, int ret; encoder->possible_crtcs = 1; + + /* Use bypass mode for parallel RGB/LVDS encoder */ + if (fsl_dev->tcon) + fsl_tcon_bypass_enable(fsl_dev->tcon); + ret = drm_encoder_init(fsl_dev->drm, encoder, &encoder_funcs, DRM_MODE_ENCODER_LVDS, NULL); if (ret < 0) return ret; - drm_encoder_helper_add(encoder, &encoder_helper_funcs); - return 0; } -- cgit v1.2.3 From b6ead864ea893ef55828be0ec0d6c10f7c1c4e30 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Tue, 4 Oct 2016 16:56:38 -0700 Subject: drm/fsl-dcu: do not transfer registers on plane init There is no need to explicitly initiate a register transfer and turn off the DCU after initializing the plane registers. In fact, this is harmful and leads to unnecessary flickers if the DCU has been left on by the bootloader. Signed-off-by: Stefan Agner Tested-By: Meng Yi --- drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c index a7e5486bd1e9..9e6f7d8112b3 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c @@ -211,11 +211,6 @@ void fsl_dcu_drm_init_planes(struct drm_device *dev) for (j = 1; j <= fsl_dev->soc->layer_regs; j++) regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(i, j), 0); } - regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE, - DCU_MODE_DCU_MODE_MASK, - DCU_MODE_DCU_MODE(DCU_MODE_OFF)); - regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE, - DCU_UPDATE_MODE_READREG); } struct drm_plane *fsl_dcu_drm_primary_create_plane(struct drm_device *dev) -- cgit v1.2.3 From 9789037695018e25902469ea0e540c07580b940f Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 5 Oct 2016 14:37:57 -0700 Subject: drm/fsl-dcu: do not transfer registers in mode_set_nofb Do not schedule a transfer of mode settings early. Modes should get applied on on CRTC enable where we also enable the pixel clock. Signed-off-by: Stefan Agner Tested-By: Meng Yi --- drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c index 3371635cd4d7..5ad1d68c8194 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c @@ -116,8 +116,6 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc) DCU_THRESHOLD_LS_BF_VS(BF_VS_VAL) | DCU_THRESHOLD_OUT_BUF_HIGH(BUF_MAX_VAL) | DCU_THRESHOLD_OUT_BUF_LOW(BUF_MIN_VAL)); - regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE, - DCU_UPDATE_MODE_READREG); return; } -- cgit v1.2.3 From 0a70c998d0c571c66d0ba8ffd9f803392a53193d Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Tue, 4 Oct 2016 17:40:29 -0700 Subject: drm/fsl-dcu: enable pixel clock when enabling CRTC The pixel clock should not be on if the CRTC is not in use, hence move clock enable/disable calls into CRTC callbacks. Signed-off-by: Stefan Agner Tested-By: Meng Yi --- drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 2 ++ drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 21 +-------------------- 2 files changed, 3 insertions(+), 20 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c index 5ad1d68c8194..b2d5e188b1b8 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c @@ -51,6 +51,7 @@ static void fsl_dcu_drm_disable_crtc(struct drm_crtc *crtc) DCU_MODE_DCU_MODE(DCU_MODE_OFF)); regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE, DCU_UPDATE_MODE_READREG); + clk_disable_unprepare(fsl_dev->pix_clk); } static void fsl_dcu_drm_crtc_enable(struct drm_crtc *crtc) @@ -58,6 +59,7 @@ static void fsl_dcu_drm_crtc_enable(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct fsl_dcu_drm_device *fsl_dev = dev->dev_private; + clk_prepare_enable(fsl_dev->pix_clk); regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE, DCU_MODE_DCU_MODE_MASK, DCU_MODE_DCU_MODE(DCU_MODE_NORMAL)); diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c index 3897f5671776..e04efbed1a54 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c @@ -267,12 +267,6 @@ static int fsl_dcu_drm_pm_resume(struct device *dev) return ret; } - ret = clk_prepare_enable(fsl_dev->pix_clk); - if (ret < 0) { - dev_err(dev, "failed to enable pix clk\n"); - goto disable_dcu_clk; - } - if (fsl_dev->tcon) fsl_tcon_bypass_enable(fsl_dev->tcon); fsl_dcu_drm_init_planes(fsl_dev->drm); @@ -286,10 +280,6 @@ static int fsl_dcu_drm_pm_resume(struct device *dev) enable_irq(fsl_dev->irq); return 0; - -disable_dcu_clk: - clk_disable_unprepare(fsl_dev->clk); - return ret; } #endif @@ -403,18 +393,12 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev) goto disable_clk; } - ret = clk_prepare_enable(fsl_dev->pix_clk); - if (ret < 0) { - dev_err(dev, "failed to enable pix clk\n"); - goto unregister_pix_clk; - } - fsl_dev->tcon = fsl_tcon_init(dev); drm = drm_dev_alloc(driver, dev); if (IS_ERR(drm)) { ret = PTR_ERR(drm); - goto disable_pix_clk; + goto unregister_pix_clk; } fsl_dev->dev = dev; @@ -435,8 +419,6 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev) unref: drm_dev_unref(drm); -disable_pix_clk: - clk_disable_unprepare(fsl_dev->pix_clk); unregister_pix_clk: clk_unregister(fsl_dev->pix_clk); disable_clk: @@ -449,7 +431,6 @@ static int fsl_dcu_drm_remove(struct platform_device *pdev) struct fsl_dcu_drm_device *fsl_dev = platform_get_drvdata(pdev); clk_disable_unprepare(fsl_dev->clk); - clk_disable_unprepare(fsl_dev->pix_clk); clk_unregister(fsl_dev->pix_clk); drm_put_dev(fsl_dev->drm); -- cgit v1.2.3 From 5fb57ab328aaf313c5ad9c4c48900f632e7c6f1c Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 18 Oct 2016 12:30:36 +0200 Subject: drm/imx: ipuv3-plane: make sure x/y offsets are even in case of chroma subsampling Odd x/y offsets are not allowed for horizontally/vertically chroma subsampled planar YUV formats. Signed-off-by: Philipp Zabel Acked-by: Liu Ying --- drivers/gpu/drm/imx/ipuv3-plane.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c index 5c342997863e..e1ad844abafb 100644 --- a/drivers/gpu/drm/imx/ipuv3-plane.c +++ b/drivers/gpu/drm/imx/ipuv3-plane.c @@ -259,6 +259,7 @@ static int ipu_plane_atomic_check(struct drm_plane *plane, struct drm_framebuffer *fb = state->fb; struct drm_framebuffer *old_fb = old_state->fb; unsigned long eba, ubo, vbo, old_ubo, old_vbo; + int hsub, vsub; /* Ok to disable */ if (!fb) @@ -372,6 +373,16 @@ static int ipu_plane_atomic_check(struct drm_plane *plane, if (old_fb && old_fb->pitches[1] != fb->pitches[1]) crtc_state->mode_changed = true; + + /* + * The x/y offsets must be even in case of horizontal/vertical + * chroma subsampling. + */ + hsub = drm_format_horz_chroma_subsampling(fb->pixel_format); + vsub = drm_format_vert_chroma_subsampling(fb->pixel_format); + if (((state->src_x >> 16) & (hsub - 1)) || + ((state->src_y >> 16) & (vsub - 1))) + return -EINVAL; } return 0; -- cgit v1.2.3 From 86126748cd5063aa888ce252f16b89b35e7d4707 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 18 Oct 2016 17:09:30 +0200 Subject: drm/imx: ipuv3-plane: disable local alpha for planes without alpha channel Without this patch, after enabling the overlay plane with an RGBA framebuffer, switching to a framebuffer without alpha channel would cause the plane to vanish, since the pixel local alpha is constant zero in that case. Disable local alpha again when setting an opaque framebuffer. Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/ipuv3-plane.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c index e1ad844abafb..d5864ed4d772 100644 --- a/drivers/gpu/drm/imx/ipuv3-plane.c +++ b/drivers/gpu/drm/imx/ipuv3-plane.c @@ -437,6 +437,7 @@ static void ipu_plane_atomic_update(struct drm_plane *plane, ipu_dp_set_global_alpha(ipu_plane->dp, false, 0, false); break; default: + ipu_dp_set_global_alpha(ipu_plane->dp, true, 0, true); break; } } -- cgit v1.2.3 From 77f7f71f5be1087823296f2dd8114ff7246ae877 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 14 Oct 2016 11:11:06 -0400 Subject: drm/amdgpu/powerplay/smu7: fix static checker warning Casting of voltage values to a larger size results in overwriting adjacent memory in the structure. Reviewed-by: Rex Zhu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 609996c84ad5..13333d01d2ef 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -2127,15 +2127,18 @@ static int smu7_patch_acp_vddc(struct pp_hwmgr *hwmgr, } static int smu7_patch_limits_vddc(struct pp_hwmgr *hwmgr, - struct phm_clock_and_voltage_limits *tab) + struct phm_clock_and_voltage_limits *tab) { + uint32_t vddc, vddci; struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend); if (tab) { - smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, (uint32_t *)&tab->vddc, - &data->vddc_leakage); - smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, (uint32_t *)&tab->vddci, - &data->vddci_leakage); + smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, &vddc, + &data->vddc_leakage); + tab->vddc = vddc; + smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, &vddci, + &data->vddci_leakage); + tab->vddci = vddci; } return 0; -- cgit v1.2.3 From fb9a5b0c1c9893db2e0d18544fd49e19d784a87d Mon Sep 17 00:00:00 2001 From: Tom St Denis Date: Thu, 13 Oct 2016 12:38:07 -0400 Subject: drm/radeon/si_dpm: Limit clocks on HD86xx part Limit clocks on a specific HD86xx part to avoid crashes (while awaiting an appropriate PP fix). Signed-off-by: Tom St Denis Reviewed-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/si_dpm.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c index 89bdf20344ae..e22b11189628 100644 --- a/drivers/gpu/drm/radeon/si_dpm.c +++ b/drivers/gpu/drm/radeon/si_dpm.c @@ -3021,6 +3021,12 @@ static void si_apply_state_adjust_rules(struct radeon_device *rdev, max_sclk = 75000; max_mclk = 80000; } + /* limit clocks on HD8600 series */ + if (rdev->pdev->device == 0x6660 && + rdev->pdev->revision == 0x83) { + max_sclk = 75000; + max_mclk = 80000; + } if (rps->vce_active) { rps->evclk = rdev->pm.dpm.vce_states[rdev->pm.dpm.vce_level].evclk; -- cgit v1.2.3 From 08e23a02e3e2dd6dde0f2f5bb90d03f5bc2a5804 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 6 Oct 2016 11:25:25 -0400 Subject: drm/amdgpu: drop atom scratch save/restore in gpu reset MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is already handled by the dce IP modules in their suspend and resume code. No need to do it again. Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index b4f4a9239069..2b0267494bca 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2268,8 +2268,6 @@ int amdgpu_gpu_reset(struct amdgpu_device *adev) } if (need_full_reset) { - /* save scratch */ - amdgpu_atombios_scratch_regs_save(adev); r = amdgpu_suspend(adev); retry: @@ -2288,8 +2286,6 @@ retry: dev_info(adev->dev, "GPU reset succeeded, trying to resume\n"); r = amdgpu_resume(adev); } - /* restore scratch */ - amdgpu_atombios_scratch_regs_restore(adev); } if (!r) { amdgpu_irq_gpu_reset_resume_helper(adev); -- cgit v1.2.3 From e695e77c6b49c49e5eafdc6239d6b22bfa30c7cc Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 19 Oct 2016 14:40:58 -0400 Subject: drm/amdgpu: move atom scratch register save/restore to common code We need this for more than just DCE. Move it out of the DCE modules and into the device code. This way we can be sure the scratch registers are initialized properly before we run asic_init which happens before DCE IPs are restored. Fixes atombios hangs in asic_init. Reviewed-by: JimQu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 5 ++++- drivers/gpu/drm/amd/amdgpu/dce_v10_0.c | 6 ------ drivers/gpu/drm/amd/amdgpu/dce_v11_0.c | 6 ------ drivers/gpu/drm/amd/amdgpu/dce_v6_0.c | 6 ------ drivers/gpu/drm/amd/amdgpu/dce_v8_0.c | 6 ------ 5 files changed, 4 insertions(+), 25 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 2b0267494bca..7ca07e7b25c1 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -1959,6 +1959,7 @@ int amdgpu_device_suspend(struct drm_device *dev, bool suspend, bool fbcon) /* evict remaining vram memory */ amdgpu_bo_evict_vram(adev); + amdgpu_atombios_scratch_regs_save(adev); pci_save_state(dev->pdev); if (suspend) { /* Shut down the device */ @@ -2010,6 +2011,7 @@ int amdgpu_device_resume(struct drm_device *dev, bool resume, bool fbcon) return r; } } + amdgpu_atombios_scratch_regs_restore(adev); /* post card */ if (!amdgpu_card_posted(adev) || !resume) { @@ -2277,8 +2279,9 @@ retry: amdgpu_display_stop_mc_access(adev, &save); amdgpu_wait_for_idle(adev, AMD_IP_BLOCK_TYPE_GMC); } - + amdgpu_atombios_scratch_regs_save(adev); r = amdgpu_asic_reset(adev); + amdgpu_atombios_scratch_regs_restore(adev); /* post card */ amdgpu_atom_asic_init(adev->mode_info.atom_context); diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c index 4108c686aa7c..9260caef74fa 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c @@ -3151,10 +3151,6 @@ static int dce_v10_0_hw_fini(void *handle) static int dce_v10_0_suspend(void *handle) { - struct amdgpu_device *adev = (struct amdgpu_device *)handle; - - amdgpu_atombios_scratch_regs_save(adev); - return dce_v10_0_hw_fini(handle); } @@ -3165,8 +3161,6 @@ static int dce_v10_0_resume(void *handle) ret = dce_v10_0_hw_init(handle); - amdgpu_atombios_scratch_regs_restore(adev); - /* turn on the BL */ if (adev->mode_info.bl_encoder) { u8 bl_level = amdgpu_display_backlight_get_level(adev, diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c index f264b8f17ad1..367739bd1927 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c @@ -3215,10 +3215,6 @@ static int dce_v11_0_hw_fini(void *handle) static int dce_v11_0_suspend(void *handle) { - struct amdgpu_device *adev = (struct amdgpu_device *)handle; - - amdgpu_atombios_scratch_regs_save(adev); - return dce_v11_0_hw_fini(handle); } @@ -3229,8 +3225,6 @@ static int dce_v11_0_resume(void *handle) ret = dce_v11_0_hw_init(handle); - amdgpu_atombios_scratch_regs_restore(adev); - /* turn on the BL */ if (adev->mode_info.bl_encoder) { u8 bl_level = amdgpu_display_backlight_get_level(adev, diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c index b948d6cb1399..15f9fc0514b2 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c @@ -2482,10 +2482,6 @@ static int dce_v6_0_hw_fini(void *handle) static int dce_v6_0_suspend(void *handle) { - struct amdgpu_device *adev = (struct amdgpu_device *)handle; - - amdgpu_atombios_scratch_regs_save(adev); - return dce_v6_0_hw_fini(handle); } @@ -2496,8 +2492,6 @@ static int dce_v6_0_resume(void *handle) ret = dce_v6_0_hw_init(handle); - amdgpu_atombios_scratch_regs_restore(adev); - /* turn on the BL */ if (adev->mode_info.bl_encoder) { u8 bl_level = amdgpu_display_backlight_get_level(adev, diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c index 5966166ec94c..8c4d808db0f1 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c @@ -3033,10 +3033,6 @@ static int dce_v8_0_hw_fini(void *handle) static int dce_v8_0_suspend(void *handle) { - struct amdgpu_device *adev = (struct amdgpu_device *)handle; - - amdgpu_atombios_scratch_regs_save(adev); - return dce_v8_0_hw_fini(handle); } @@ -3047,8 +3043,6 @@ static int dce_v8_0_resume(void *handle) ret = dce_v8_0_hw_init(handle); - amdgpu_atombios_scratch_regs_restore(adev); - /* turn on the BL */ if (adev->mode_info.bl_encoder) { u8 bl_level = amdgpu_display_backlight_get_level(adev, -- cgit v1.2.3 From 1304f0c7ddd80b359282bb2077c8a7bc51f06c3a Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Mon, 17 Oct 2016 09:49:29 +0800 Subject: drm/amd/amdgpu: expose max engine and memory clock for powerplay enabled case Signed-off-by: Evan Quan Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c index c2c7fb140338..203d98b00555 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c @@ -459,10 +459,8 @@ static int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file /* return all clocks in KHz */ dev_info.gpu_counter_freq = amdgpu_asic_get_xclk(adev) * 10; if (adev->pm.dpm_enabled) { - dev_info.max_engine_clock = - adev->pm.dpm.dyn_state.max_clock_voltage_on_ac.sclk * 10; - dev_info.max_memory_clock = - adev->pm.dpm.dyn_state.max_clock_voltage_on_ac.mclk * 10; + dev_info.max_engine_clock = amdgpu_dpm_get_sclk(adev, false) * 10; + dev_info.max_memory_clock = amdgpu_dpm_get_mclk(adev, false) * 10; } else { dev_info.max_engine_clock = adev->pm.default_sclk * 10; dev_info.max_memory_clock = adev->pm.default_mclk * 10; -- cgit v1.2.3 From 0711257ee6d1e8bec08fdf26021f968d4d041e91 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 18 Oct 2016 00:32:00 -0400 Subject: drm/amdgpu/st: move ATC CG golden init from gfx to mc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It's technically an MC register so make sure we initialize it in the MC module rather than the gfx module. Since other bits in the same register are used to enable ATC CG features make sure we apply the golden setting first. Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 1 - drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index ee6a48a09214..bb97182dc749 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -640,7 +640,6 @@ static const u32 stoney_mgcg_cgcg_init[] = mmCP_MEM_SLP_CNTL, 0xffffffff, 0x00020201, mmRLC_MEM_SLP_CNTL, 0xffffffff, 0x00020201, mmCGTS_SM_CTRL_REG, 0xffffffff, 0x96940200, - mmATC_MISC_CG, 0xffffffff, 0x000c0200, }; static void gfx_v8_0_set_ring_funcs(struct amdgpu_device *adev); diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c index c22ef140a542..a16b2201d52c 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c @@ -100,6 +100,7 @@ static const u32 cz_mgcg_cgcg_init[] = static const u32 stoney_mgcg_cgcg_init[] = { + mmATC_MISC_CG, 0xffffffff, 0x000c0200, mmMC_MEM_POWER_LS, 0xffffffff, 0x00000104 }; -- cgit v1.2.3 From e6b2a7d294360ecf128891d8288603526ce4d6ad Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 19 Oct 2016 13:06:14 -0400 Subject: drm/amdgpu: explicitly set pg_flags for ST No need to retain previous settings as this is the first time we set pg_flags. Probably a copy/paste typo from the CZ code. Avoids confusion. No change in behavior as adev is kzallocated. Reviewed-by: Tom St Denis Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/vi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c index c0d9aad7126f..7c13090df7c0 100644 --- a/drivers/gpu/drm/amd/amdgpu/vi.c +++ b/drivers/gpu/drm/amd/amdgpu/vi.c @@ -1651,7 +1651,7 @@ static int vi_common_early_init(void *handle) AMD_CG_SUPPORT_SDMA_MGCG | AMD_CG_SUPPORT_SDMA_LS | AMD_CG_SUPPORT_VCE_MGCG; - adev->pg_flags |= AMD_PG_SUPPORT_GFX_PG | + adev->pg_flags = AMD_PG_SUPPORT_GFX_PG | AMD_PG_SUPPORT_GFX_SMG | AMD_PG_SUPPORT_GFX_PIPELINE | AMD_PG_SUPPORT_UVD | -- cgit v1.2.3 From 57d7f9b64ad9d4d9c87ed1d6b58e5bfabf2dfc6c Mon Sep 17 00:00:00 2001 From: jimqu Date: Thu, 20 Oct 2016 14:58:04 +0800 Subject: drm/amdgpu: avoid drm error log during S3 on RHEL7.3 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: JimQu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c index b0f6e6957536..82dc8d20e28a 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c @@ -519,7 +519,8 @@ static int amdgpu_cs_parser_bos(struct amdgpu_cs_parser *p, r = ttm_eu_reserve_buffers(&p->ticket, &p->validated, true, &duplicates); if (unlikely(r != 0)) { - DRM_ERROR("ttm_eu_reserve_buffers failed.\n"); + if (r != -ERESTARTSYS) + DRM_ERROR("ttm_eu_reserve_buffers failed.\n"); goto error_free_pages; } -- cgit v1.2.3 From 51585e03f5b26521d7840c06f4807ee62b23af3a Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Mon, 17 Oct 2016 18:15:26 +0800 Subject: drm/amd/powerplay: fix static checker warning in process_pptables_v1_0.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rex Zhu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/process_pptables_v1_0.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/process_pptables_v1_0.c b/drivers/gpu/drm/amd/powerplay/hwmgr/process_pptables_v1_0.c index 7de701d8a450..4477c55a58e3 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/process_pptables_v1_0.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/process_pptables_v1_0.c @@ -1201,12 +1201,15 @@ static uint32_t make_classification_flags(struct pp_hwmgr *hwmgr, static int ppt_get_num_of_vce_state_table_entries_v1_0(struct pp_hwmgr *hwmgr) { const ATOM_Tonga_POWERPLAYTABLE *pp_table = get_powerplay_table(hwmgr); - const ATOM_Tonga_VCE_State_Table *vce_state_table = - (ATOM_Tonga_VCE_State_Table *)(((unsigned long)pp_table) + le16_to_cpu(pp_table->usVCEStateTableOffset)); + const ATOM_Tonga_VCE_State_Table *vce_state_table; - if (vce_state_table == NULL) + + if (pp_table == NULL) return 0; + vce_state_table = (void *)pp_table + + le16_to_cpu(pp_table->usVCEStateTableOffset); + return vce_state_table->ucNumEntries; } -- cgit v1.2.3 From 8861a8209782faffedb6d64572fa968ee9c1c375 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Thu, 20 Oct 2016 15:51:25 +0800 Subject: drm/amd/powerplay: don't give up if DPM is already running Currently the driver crashes if smu7_enable_dpm_tasks() returns early, which it does if DPM is already active. It seems to be better just to continue anyway, at least I haven't noticed any ill effects. It's also unclear at what state the hardware was left by the previous driver, so IMO it's better to always fully initialize. Way to reproduce: with GPU passthrough. forced power off the VM or forced reset the VM without shutting down the Os. Signed-off-by: Grazvydas Ignotas Reviewed-by: Edward O'Callaghan Reviewed-by: Rex Zhu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 13333d01d2ef..75854021f403 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -1168,8 +1168,8 @@ int smu7_enable_dpm_tasks(struct pp_hwmgr *hwmgr) tmp_result = (!smum_is_dpm_running(hwmgr)) ? 0 : -1; PP_ASSERT_WITH_CODE(tmp_result == 0, - "DPM is already running right now, no need to enable DPM!", - return 0); + "DPM is already running", + ); if (smu7_voltage_control(hwmgr)) { tmp_result = smu7_enable_voltage_control(hwmgr); -- cgit v1.2.3 From e8d7515a983b5ccf6681db0ade3714e837581a97 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 21 Oct 2016 16:16:07 -0400 Subject: drm/amdgpu: cancel reset work on fini MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Cancel any pending reset work when we tear down the driver. Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c index 278708f5a744..9fa809876339 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c @@ -239,6 +239,7 @@ int amdgpu_irq_init(struct amdgpu_device *adev) if (r) { adev->irq.installed = false; flush_work(&adev->hotplug_work); + cancel_work_sync(&adev->reset_work); return r; } @@ -264,6 +265,7 @@ void amdgpu_irq_fini(struct amdgpu_device *adev) if (adev->irq.msi_enabled) pci_disable_msi(adev->pdev); flush_work(&adev->hotplug_work); + cancel_work_sync(&adev->reset_work); } for (i = 0; i < AMDGPU_MAX_IRQ_SRC_ID; ++i) { -- cgit v1.2.3 From 4560738a8e9d5c0a053b8b896487b83e6948f4a1 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 21 Oct 2016 16:30:10 -0400 Subject: drm/amdgpu/dpm: flush any thermal work on fini MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Flush any outstanding thermal work before tearing down the dpm driver. Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/ci_dpm.c | 2 ++ drivers/gpu/drm/amd/amdgpu/kv_dpm.c | 2 ++ drivers/gpu/drm/amd/amdgpu/si_dpm.c | 2 ++ 3 files changed, 6 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/ci_dpm.c b/drivers/gpu/drm/amd/amdgpu/ci_dpm.c index 1d8c375a3561..29e6061b9087 100644 --- a/drivers/gpu/drm/amd/amdgpu/ci_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/ci_dpm.c @@ -6236,6 +6236,8 @@ static int ci_dpm_sw_fini(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; + flush_work(&adev->pm.dpm.thermal.work); + mutex_lock(&adev->pm.mutex); amdgpu_pm_sysfs_fini(adev); ci_dpm_fini(adev); diff --git a/drivers/gpu/drm/amd/amdgpu/kv_dpm.c b/drivers/gpu/drm/amd/amdgpu/kv_dpm.c index f8618a3881a8..71d2856222fa 100644 --- a/drivers/gpu/drm/amd/amdgpu/kv_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/kv_dpm.c @@ -3063,6 +3063,8 @@ static int kv_dpm_sw_fini(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; + flush_work(&adev->pm.dpm.thermal.work); + mutex_lock(&adev->pm.mutex); amdgpu_pm_sysfs_fini(adev); kv_dpm_fini(adev); diff --git a/drivers/gpu/drm/amd/amdgpu/si_dpm.c b/drivers/gpu/drm/amd/amdgpu/si_dpm.c index 3de7bca5854b..ee77e9cb55b1 100644 --- a/drivers/gpu/drm/amd/amdgpu/si_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/si_dpm.c @@ -7777,6 +7777,8 @@ static int si_dpm_sw_fini(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; + flush_work(&adev->pm.dpm.thermal.work); + mutex_lock(&adev->pm.mutex); amdgpu_pm_sysfs_fini(adev); si_dpm_fini(adev); -- cgit v1.2.3 From 9dc79965b21967caebde575f5f5d8bf1aa2c23ab Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Mon, 24 Oct 2016 16:52:20 +0900 Subject: Revert "drm/radeon: fix DP link training issue with second 4K monitor" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 1a738347df2ee4977459a8776fe2c62196bdcb1b. It caused at least some Kaveri laptops to incorrectly report DisplayPort connectors as connected. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97857 Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher Signed-off-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_dp_auxch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/radeon/radeon_dp_auxch.c b/drivers/gpu/drm/radeon/radeon_dp_auxch.c index 2d465648856a..474a8a1886f7 100644 --- a/drivers/gpu/drm/radeon/radeon_dp_auxch.c +++ b/drivers/gpu/drm/radeon/radeon_dp_auxch.c @@ -105,7 +105,7 @@ radeon_dp_aux_transfer_native(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg tmp &= AUX_HPD_SEL(0x7); tmp |= AUX_HPD_SEL(chan->rec.hpd); - tmp |= AUX_EN | AUX_LS_READ_EN | AUX_HPD_DISCON(0x1); + tmp |= AUX_EN | AUX_LS_READ_EN; WREG32(AUX_CONTROL + aux_offset[instance], tmp); -- cgit v1.2.3 From a053fb7e512c77f0742bceb578b10025256e1911 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sun, 23 Oct 2016 21:31:44 +0300 Subject: drm/amdgpu: fix sched fence slab teardown MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To free fences, call_rcu() is used, which calls amd_sched_fence_free() after a grace period. During teardown, there is no guarantee all callbacks have finished, so sched_fence_slab may be destroyed before all fences have been freed. If we are lucky, this results in some slab warnings, if not, we get a crash in one of rcu threads because callback is called after amdgpu has already been unloaded. Fix it with a rcu_barrier(). Fixes: 189e0fb76304 ("drm/amdgpu: RCU protected amd_sched_fence_release") Acked-by: Chunming Zhou Reviewed-by: Christian König Signed-off-by: Grazvydas Ignotas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/scheduler/gpu_scheduler.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c index 963a24d46a93..910b8d5b21c5 100644 --- a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c +++ b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c @@ -645,6 +645,7 @@ void amd_sched_fini(struct amd_gpu_scheduler *sched) { if (sched->thread) kthread_stop(sched->thread); + rcu_barrier(); if (atomic_dec_and_test(&sched_fence_slab_ref)) kmem_cache_destroy(sched_fence_slab); } -- cgit v1.2.3 From 2d7c17be00e0dce3bc1a092a2c277a9f86c69ca9 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sun, 23 Oct 2016 21:31:45 +0300 Subject: drm/amdgpu: fix a vm_flush fence leak MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Looks like .last_flush reference is left at teardown. Leak reported by CONFIG_SLUB_DEBUG. Fixes: 41d9eb2c5a2a ("drm/amdgpu: add a fence after the VM flush") Reviewed-by: Chunming Zhou Reviewed-by: Christian König Signed-off-by: Grazvydas Ignotas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index 06f24322e7c3..968c4260d7a7 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -1758,5 +1758,6 @@ void amdgpu_vm_manager_fini(struct amdgpu_device *adev) fence_put(adev->vm_manager.ids[i].first); amdgpu_sync_free(&adev->vm_manager.ids[i].active); fence_put(id->flushed_updates); + fence_put(id->last_flush); } } -- cgit v1.2.3 From 9566213359aa75851a9ca7fea613652fb5fcb081 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sun, 23 Oct 2016 21:31:47 +0300 Subject: drm/amdgpu: update kernel-doc for some functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The names were wrong. Reviewed-by: Edward O'Callaghan Reviewed-by: Christian König Signed-off-by: Grazvydas Ignotas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/scheduler/sched_fence.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/scheduler/sched_fence.c b/drivers/gpu/drm/amd/scheduler/sched_fence.c index 6b63beaf7574..3653b5a40494 100644 --- a/drivers/gpu/drm/amd/scheduler/sched_fence.c +++ b/drivers/gpu/drm/amd/scheduler/sched_fence.c @@ -103,7 +103,7 @@ static void amd_sched_fence_free(struct rcu_head *rcu) } /** - * amd_sched_fence_release - callback that fence can be freed + * amd_sched_fence_release_scheduled - callback that fence can be freed * * @fence: fence * @@ -118,7 +118,7 @@ static void amd_sched_fence_release_scheduled(struct fence *f) } /** - * amd_sched_fence_release_scheduled - drop extra reference + * amd_sched_fence_release_finished - drop extra reference * * @f: fence * -- cgit v1.2.3 From 0f10425e811355986907c54f7d1d06703e406092 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sun, 23 Oct 2016 21:31:43 +0300 Subject: drm/amdgpu: fix fence slab teardown MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To free fences, call_rcu() is used, which calls amdgpu_fence_free() after a grace period. During teardown, there is no guarantee all callbacks have finished, so amdgpu_fence_slab may be destroyed before all fences have been freed. If we are lucky, this results in some slab warnings, if not, we get a crash in one of rcu threads because callback is called after amdgpu has already been unloaded. Fix it with a rcu_barrier(). Fixes: b44135351a3a ("drm/amdgpu: RCU protected amdgpu_fence_release") Acked-by: Chunming Zhou Reviewed-by: Christian König Signed-off-by: Grazvydas Ignotas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c index 3a2e42f4b897..77b34ec92632 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c @@ -68,6 +68,7 @@ int amdgpu_fence_slab_init(void) void amdgpu_fence_slab_fini(void) { + rcu_barrier(); kmem_cache_destroy(amdgpu_fence_slab); } /* -- cgit v1.2.3 From ef6239e0cf5e665e7b20fd659678b98331b3081d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 25 Oct 2016 09:37:37 -0400 Subject: drm/amdgpu/vce3: only enable 3 rings on new enough firmware (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Older firmware versions don't support 3 rings. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=98016 v2: use define for fw version Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/vce_v3_0.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c index 8533269ec160..6feed726e299 100644 --- a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c @@ -52,6 +52,8 @@ #define VCE_V3_0_STACK_SIZE (64 * 1024) #define VCE_V3_0_DATA_SIZE ((16 * 1024 * AMDGPU_MAX_VCE_HANDLES) + (52 * 1024)) +#define FW_52_8_3 ((52 << 24) | (8 << 16) | (3 << 8)) + static void vce_v3_0_mc_resume(struct amdgpu_device *adev, int idx); static void vce_v3_0_set_ring_funcs(struct amdgpu_device *adev); static void vce_v3_0_set_irq_funcs(struct amdgpu_device *adev); @@ -382,6 +384,10 @@ static int vce_v3_0_sw_init(void *handle) if (r) return r; + /* 52.8.3 required for 3 ring support */ + if (adev->vce.fw_version < FW_52_8_3) + adev->vce.num_rings = 2; + r = amdgpu_vce_resume(adev); if (r) return r; -- cgit v1.2.3 From 537b4b462caa8bfb9726d9695b8e56e2d5e6b41e Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 24 Oct 2016 23:32:04 +0200 Subject: drm/radeon: drop register readback in cayman_cp_int_cntl_setup MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The read is taking a considerable amount of time (about 50us on this machine). The register does not ever hold anything other than the ring ID that is updated in this exact function, so there is no need for the read modify write cycle. This chops off a big chunk of the time spent in hardirq disabled context, as this function is called multiple times in the interrupt handler. With this change applied radeon won't show up in the list of the worst IRQ latency offenders anymore, where it was a regular before. Reviewed-by: Christian König Signed-off-by: Lucas Stach Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/ni.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 103fc8650197..a0d4a0522fdc 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1396,9 +1396,7 @@ static void cayman_pcie_gart_fini(struct radeon_device *rdev) void cayman_cp_int_cntl_setup(struct radeon_device *rdev, int ring, u32 cp_int_cntl) { - u32 srbm_gfx_cntl = RREG32(SRBM_GFX_CNTL) & ~3; - - WREG32(SRBM_GFX_CNTL, srbm_gfx_cntl | (ring & 3)); + WREG32(SRBM_GFX_CNTL, RINGID(ring)); WREG32(CP_INT_CNTL, cp_int_cntl); } -- cgit v1.2.3 From 7cf321d118a825c1541b43ca45294126fd474efa Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 24 Oct 2016 15:37:48 +1000 Subject: drm/drivers: add support for using the arch wc mapping API. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes a regression in all these drivers since the cache mode tracking was fixed for mixed mappings. It uses the new arch API to add the VRAM range to the PAT mapping tracking tables. Fixes: 87744ab3832 (mm: fix cache mode tracking in vm_insert_mixed()) Reviewed-by: Christian König . Signed-off-by: Dave Airlie --- drivers/gpu/drm/amd/amdgpu/amdgpu_object.c | 5 +++++ drivers/gpu/drm/ast/ast_ttm.c | 6 ++++++ drivers/gpu/drm/cirrus/cirrus_ttm.c | 7 +++++++ drivers/gpu/drm/mgag200/mgag200_ttm.c | 7 +++++++ drivers/gpu/drm/nouveau/nouveau_ttm.c | 8 ++++++++ drivers/gpu/drm/radeon/radeon_object.c | 5 +++++ 6 files changed, 38 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c index aa074fac0c7f..f3efb1c5dae9 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c @@ -754,6 +754,10 @@ static const char *amdgpu_vram_names[] = { int amdgpu_bo_init(struct amdgpu_device *adev) { + /* reserve PAT memory space to WC for VRAM */ + arch_io_reserve_memtype_wc(adev->mc.aper_base, + adev->mc.aper_size); + /* Add an MTRR for the VRAM */ adev->mc.vram_mtrr = arch_phys_wc_add(adev->mc.aper_base, adev->mc.aper_size); @@ -769,6 +773,7 @@ void amdgpu_bo_fini(struct amdgpu_device *adev) { amdgpu_ttm_fini(adev); arch_phys_wc_del(adev->mc.vram_mtrr); + arch_io_free_memtype_wc(adev->mc.aper_base, adev->mc.aper_size); } int amdgpu_bo_fbdev_mmap(struct amdgpu_bo *bo, diff --git a/drivers/gpu/drm/ast/ast_ttm.c b/drivers/gpu/drm/ast/ast_ttm.c index 608df4c90520..0743e65cb240 100644 --- a/drivers/gpu/drm/ast/ast_ttm.c +++ b/drivers/gpu/drm/ast/ast_ttm.c @@ -267,6 +267,8 @@ int ast_mm_init(struct ast_private *ast) return ret; } + arch_io_reserve_memtype_wc(pci_resource_start(dev->pdev, 0), + pci_resource_len(dev->pdev, 0)); ast->fb_mtrr = arch_phys_wc_add(pci_resource_start(dev->pdev, 0), pci_resource_len(dev->pdev, 0)); @@ -275,11 +277,15 @@ int ast_mm_init(struct ast_private *ast) void ast_mm_fini(struct ast_private *ast) { + struct drm_device *dev = ast->dev; + ttm_bo_device_release(&ast->ttm.bdev); ast_ttm_global_release(ast); arch_phys_wc_del(ast->fb_mtrr); + arch_io_free_memtype_wc(pci_resource_start(dev->pdev, 0), + pci_resource_len(dev->pdev, 0)); } void ast_ttm_placement(struct ast_bo *bo, int domain) diff --git a/drivers/gpu/drm/cirrus/cirrus_ttm.c b/drivers/gpu/drm/cirrus/cirrus_ttm.c index bb2438dd8733..5e7e63ce7bce 100644 --- a/drivers/gpu/drm/cirrus/cirrus_ttm.c +++ b/drivers/gpu/drm/cirrus/cirrus_ttm.c @@ -267,6 +267,9 @@ int cirrus_mm_init(struct cirrus_device *cirrus) return ret; } + arch_io_reserve_memtype_wc(pci_resource_start(dev->pdev, 0), + pci_resource_len(dev->pdev, 0)); + cirrus->fb_mtrr = arch_phys_wc_add(pci_resource_start(dev->pdev, 0), pci_resource_len(dev->pdev, 0)); @@ -276,6 +279,8 @@ int cirrus_mm_init(struct cirrus_device *cirrus) void cirrus_mm_fini(struct cirrus_device *cirrus) { + struct drm_device *dev = cirrus->dev; + if (!cirrus->mm_inited) return; @@ -285,6 +290,8 @@ void cirrus_mm_fini(struct cirrus_device *cirrus) arch_phys_wc_del(cirrus->fb_mtrr); cirrus->fb_mtrr = 0; + arch_io_free_memtype_wc(pci_resource_start(dev->pdev, 0), + pci_resource_len(dev->pdev, 0)); } void cirrus_ttm_placement(struct cirrus_bo *bo, int domain) diff --git a/drivers/gpu/drm/mgag200/mgag200_ttm.c b/drivers/gpu/drm/mgag200/mgag200_ttm.c index 919b35f2ad24..dcf7d11ac380 100644 --- a/drivers/gpu/drm/mgag200/mgag200_ttm.c +++ b/drivers/gpu/drm/mgag200/mgag200_ttm.c @@ -266,6 +266,9 @@ int mgag200_mm_init(struct mga_device *mdev) return ret; } + arch_io_reserve_memtype_wc(pci_resource_start(dev->pdev, 0), + pci_resource_len(dev->pdev, 0)); + mdev->fb_mtrr = arch_phys_wc_add(pci_resource_start(dev->pdev, 0), pci_resource_len(dev->pdev, 0)); @@ -274,10 +277,14 @@ int mgag200_mm_init(struct mga_device *mdev) void mgag200_mm_fini(struct mga_device *mdev) { + struct drm_device *dev = mdev->dev; + ttm_bo_device_release(&mdev->ttm.bdev); mgag200_ttm_global_release(mdev); + arch_io_free_memtype_wc(pci_resource_start(dev->pdev, 0), + pci_resource_len(dev->pdev, 0)); arch_phys_wc_del(mdev->fb_mtrr); mdev->fb_mtrr = 0; } diff --git a/drivers/gpu/drm/nouveau/nouveau_ttm.c b/drivers/gpu/drm/nouveau/nouveau_ttm.c index 1825dbc33192..a6dbe8258040 100644 --- a/drivers/gpu/drm/nouveau/nouveau_ttm.c +++ b/drivers/gpu/drm/nouveau/nouveau_ttm.c @@ -398,6 +398,9 @@ nouveau_ttm_init(struct nouveau_drm *drm) /* VRAM init */ drm->gem.vram_available = drm->device.info.ram_user; + arch_io_reserve_memtype_wc(device->func->resource_addr(device, 1), + device->func->resource_size(device, 1)); + ret = ttm_bo_init_mm(&drm->ttm.bdev, TTM_PL_VRAM, drm->gem.vram_available >> PAGE_SHIFT); if (ret) { @@ -430,6 +433,8 @@ nouveau_ttm_init(struct nouveau_drm *drm) void nouveau_ttm_fini(struct nouveau_drm *drm) { + struct nvkm_device *device = nvxx_device(&drm->device); + ttm_bo_clean_mm(&drm->ttm.bdev, TTM_PL_VRAM); ttm_bo_clean_mm(&drm->ttm.bdev, TTM_PL_TT); @@ -439,4 +444,7 @@ nouveau_ttm_fini(struct nouveau_drm *drm) arch_phys_wc_del(drm->ttm.mtrr); drm->ttm.mtrr = 0; + arch_io_free_memtype_wc(device->func->resource_addr(device, 1), + device->func->resource_size(device, 1)); + } diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index be30861afae9..41b72ce6613f 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -446,6 +446,10 @@ void radeon_bo_force_delete(struct radeon_device *rdev) int radeon_bo_init(struct radeon_device *rdev) { + /* reserve PAT memory space to WC for VRAM */ + arch_io_reserve_memtype_wc(rdev->mc.aper_base, + rdev->mc.aper_size); + /* Add an MTRR for the VRAM */ if (!rdev->fastfb_working) { rdev->mc.vram_mtrr = arch_phys_wc_add(rdev->mc.aper_base, @@ -463,6 +467,7 @@ void radeon_bo_fini(struct radeon_device *rdev) { radeon_ttm_fini(rdev); arch_phys_wc_del(rdev->mc.vram_mtrr); + arch_io_free_memtype_wc(rdev->mc.aper_base, rdev->mc.aper_size); } /* Returns how many bytes TTM can move per IB. -- cgit v1.2.3 From cac5fcedaabdadf150c8a9be9fee76defc8ba444 Mon Sep 17 00:00:00 2001 From: Felix Monninger Date: Tue, 25 Oct 2016 22:28:08 +0100 Subject: drm: Release reference from blob lookup after replacing property MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drm_property_lookup_blob() returns a reference to the returned blob, and drm_atomic_replace_property_blob() takes a references to the blob it stores, so afterwards we are left owning a reference to the new_blob that we never release, and thus leak memory every time we update a property such as during drm_atomic_helper_legacy_gamma_set(). v2: update credentials, drm_property_unreference_blob() is NULL safe and NULL is passed consistently to it throughout drm_atomic.c so do so here. Reported-by: Felix Monninger Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98420 Signed-off-by: Felix Monninger Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org Fixes: 5488dc16fde7 ("drm: introduce pipe color correction properties") Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20161025212808.3908-1-chris@chris-wilson.co.uk --- drivers/gpu/drm/drm_atomic.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index 23739609427d..e6862a744210 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -420,18 +420,21 @@ drm_atomic_replace_property_blob_from_id(struct drm_crtc *crtc, ssize_t expected_size, bool *replaced) { - struct drm_device *dev = crtc->dev; struct drm_property_blob *new_blob = NULL; if (blob_id != 0) { - new_blob = drm_property_lookup_blob(dev, blob_id); + new_blob = drm_property_lookup_blob(crtc->dev, blob_id); if (new_blob == NULL) return -EINVAL; - if (expected_size > 0 && expected_size != new_blob->length) + + if (expected_size > 0 && expected_size != new_blob->length) { + drm_property_unreference_blob(new_blob); return -EINVAL; + } } drm_atomic_replace_property_blob(blob, new_blob, replaced); + drm_property_unreference_blob(new_blob); return 0; } -- cgit v1.2.3 From 87d3b6588f9bf205902868d3e5baf68e37ad4ae1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 20 Oct 2016 17:05:30 +0200 Subject: drm/fb-helper: Don't call dirty callback for untouched clips MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since 4.7 kernel, we've seen the error messages like kernel: [TTM] Buffer eviction failed kernel: qxl 0000:00:02.0: object_init failed for (4026540032, 0x00000001) kernel: [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to allocate VRAM BO on QXL when switching and accessing on VT. The culprit was the generic deferred_io code (qxl driver switched to it since 4.7). There is a race between the dirty clip update and the call of callback. In drm_fb_helper_dirty(), the dirty clip is updated in the spinlock, while it kicks off the update worker outside the spinlock. Meanwhile the update worker clears the dirty clip in the spinlock, too. Thus, when drm_fb_helper_dirty() is called concurrently, schedule_work() is called after the clip is cleared in the first worker call. This patch addresses it by validating the clip before calling the dirty fb callback. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98322 Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1003298 Fixes: eaa434defaca ('drm/fb-helper: Add fb_deferred_io support') Cc: Signed-off-by: Takashi Iwai Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20161020150530.5787-1-tiwai@suse.de --- drivers/gpu/drm/drm_fb_helper.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 03414bde1f15..aae7df01864d 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -644,7 +644,9 @@ static void drm_fb_helper_dirty_work(struct work_struct *work) clip->x2 = clip->y2 = 0; spin_unlock_irqrestore(&helper->dirty_lock, flags); - helper->fb->funcs->dirty(helper->fb, NULL, 0, 0, &clip_copy, 1); + /* call dirty callback only when it has been really touched */ + if (clip_copy.x1 < clip_copy.x2 && clip_copy.y1 < clip_copy.y2) + helper->fb->funcs->dirty(helper->fb, NULL, 0, 0, &clip_copy, 1); } /** -- cgit v1.2.3 From 7dfcb36a1f17e4c7c7c12b9d8a6902037c7d98dc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 26 Oct 2016 12:05:52 +0300 Subject: drm/fb-helper: Fix connector ref leak on error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We need to drop the connector references already taken when we abort in the middle of drm_fb_helper_single_add_all_connectors() Cc: stable@vger.kernel.org Cc: Carlos Santa Cc: Kirill A. Shutemov Tested-by: Carlos Santa Tested-by: Kirill A. Shutemov Signed-off-by: Ville Syrjälä Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-2-git-send-email-ville.syrjala@linux.intel.com --- drivers/gpu/drm/drm_fb_helper.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index aae7df01864d..efaccc2e1b4c 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -131,7 +131,12 @@ int drm_fb_helper_single_add_all_connectors(struct drm_fb_helper *fb_helper) return 0; fail: for (i = 0; i < fb_helper->connector_count; i++) { - kfree(fb_helper->connector_info[i]); + struct drm_fb_helper_connector *fb_helper_connector = + fb_helper->connector_info[i]; + + drm_connector_unreference(fb_helper_connector->connector); + + kfree(fb_helper_connector); fb_helper->connector_info[i] = NULL; } fb_helper->connector_count = 0; -- cgit v1.2.3 From 38d868e41c4b9250d5a115c049dc2d48f4909581 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 10 Oct 2016 17:50:56 +0300 Subject: drm: Don't force all planes to be added to the state due to zpos MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We don't want all planes to be added to the state whenever a plane with fixed zpos gets enabled/disabled. This is true especially for eg. cursor planes on i915, as we want cursor updates to go through w/o throttling. Same holds for drivers that don't support zpos at all (i915 actually falls into this category right now since we've not yet added zpos support). Allow drivers more freedom by letting them deal with zpos themselves instead of doing it in drm_atomic_helper_check_planes() unconditionally. Let's just inline the required calls into all the driver that currently depend on this. v2: Inline the stuff into the drivers instead of adding another helper, document things better (Daniel) Cc: Daniel Vetter Cc: Marek Szyprowski Cc: Benjamin Gaignard Cc: Vincent Abriou Cc: Laurent Pinchart Cc: Inki Dae Cc: Joonyoung Shim Cc: Seung-Woo Kim Cc: Kyungmin Park Cc: Lyude Cc: Maarten Lankhorst Cc: stable@vger.kernel.org Fixes: 44d1240d006c ("drm: add generic zpos property") Signed-off-by: Ville Syrjälä Reviewed-by: Sean Paul Acked-by: Benjamin Gaignard Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1476111056-12734-1-git-send-email-ville.syrjala@linux.intel.com --- drivers/gpu/drm/drm_atomic_helper.c | 4 ---- drivers/gpu/drm/exynos/exynos_drm_drv.c | 20 ++++++++++++++++++++ drivers/gpu/drm/exynos/exynos_drm_drv.h | 1 + drivers/gpu/drm/exynos/exynos_drm_fb.c | 2 +- drivers/gpu/drm/rcar-du/rcar_du_kms.c | 12 ++++++++++-- drivers/gpu/drm/sti/sti_drv.c | 22 +++++++++++++++++++++- 6 files changed, 53 insertions(+), 8 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index c3f83476f996..21f992605541 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -594,10 +594,6 @@ drm_atomic_helper_check_planes(struct drm_device *dev, struct drm_plane_state *plane_state; int i, ret = 0; - ret = drm_atomic_normalize_zpos(dev, state); - if (ret) - return ret; - for_each_plane_in_state(state, plane, plane_state, i) { const struct drm_plane_helper_funcs *funcs; diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c index def78c8c1780..f86e7c846678 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c @@ -262,6 +262,26 @@ int exynos_atomic_commit(struct drm_device *dev, struct drm_atomic_state *state, return 0; } +int exynos_atomic_check(struct drm_device *dev, + struct drm_atomic_state *state) +{ + int ret; + + ret = drm_atomic_helper_check_modeset(dev, state); + if (ret) + return ret; + + ret = drm_atomic_normalize_zpos(dev, state); + if (ret) + return ret; + + ret = drm_atomic_helper_check_planes(dev, state); + if (ret) + return ret; + + return ret; +} + static int exynos_drm_open(struct drm_device *dev, struct drm_file *file) { struct drm_exynos_file_private *file_priv; diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index d215149e737b..80c4d5b81689 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -301,6 +301,7 @@ static inline int exynos_dpi_bind(struct drm_device *dev, int exynos_atomic_commit(struct drm_device *dev, struct drm_atomic_state *state, bool nonblock); +int exynos_atomic_check(struct drm_device *dev, struct drm_atomic_state *state); extern struct platform_driver fimd_driver; diff --git a/drivers/gpu/drm/exynos/exynos_drm_fb.c b/drivers/gpu/drm/exynos/exynos_drm_fb.c index 40ce841eb952..23cce0a3f5fc 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fb.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fb.c @@ -190,7 +190,7 @@ dma_addr_t exynos_drm_fb_dma_addr(struct drm_framebuffer *fb, int index) static const struct drm_mode_config_funcs exynos_drm_mode_config_funcs = { .fb_create = exynos_user_fb_create, .output_poll_changed = exynos_drm_output_poll_changed, - .atomic_check = drm_atomic_helper_check, + .atomic_check = exynos_atomic_check, .atomic_commit = exynos_atomic_commit, }; diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c index bd9c3bb9252c..392c7e6de042 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c @@ -231,8 +231,16 @@ static int rcar_du_atomic_check(struct drm_device *dev, struct rcar_du_device *rcdu = dev->dev_private; int ret; - ret = drm_atomic_helper_check(dev, state); - if (ret < 0) + ret = drm_atomic_helper_check_modeset(dev, state); + if (ret) + return ret; + + ret = drm_atomic_normalize_zpos(dev, state); + if (ret) + return ret; + + ret = drm_atomic_helper_check_planes(dev, state); + if (ret) return ret; if (rcar_du_has(rcdu, RCAR_DU_FEATURE_VSP1_SOURCE)) diff --git a/drivers/gpu/drm/sti/sti_drv.c b/drivers/gpu/drm/sti/sti_drv.c index 2784919a7366..9df308565f6c 100644 --- a/drivers/gpu/drm/sti/sti_drv.c +++ b/drivers/gpu/drm/sti/sti_drv.c @@ -195,6 +195,26 @@ static void sti_atomic_work(struct work_struct *work) sti_atomic_complete(private, private->commit.state); } +static int sti_atomic_check(struct drm_device *dev, + struct drm_atomic_state *state) +{ + int ret; + + ret = drm_atomic_helper_check_modeset(dev, state); + if (ret) + return ret; + + ret = drm_atomic_normalize_zpos(dev, state); + if (ret) + return ret; + + ret = drm_atomic_helper_check_planes(dev, state); + if (ret) + return ret; + + return ret; +} + static int sti_atomic_commit(struct drm_device *drm, struct drm_atomic_state *state, bool nonblock) { @@ -248,7 +268,7 @@ static void sti_output_poll_changed(struct drm_device *ddev) static const struct drm_mode_config_funcs sti_mode_config_funcs = { .fb_create = drm_fb_cma_create, .output_poll_changed = sti_output_poll_changed, - .atomic_check = drm_atomic_helper_check, + .atomic_check = sti_atomic_check, .atomic_commit = sti_atomic_commit, }; -- cgit v1.2.3 From a2889606636d135148de101fe3311dfea67baf1c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 26 Oct 2016 17:41:18 +0300 Subject: drm/fb-helper: Keep references for the current set of used connectors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The fbdev helper code keeps around two lists of connectors. One is the list of all connectors it could use, and that list already holds references for all the connectors. However the other list, or rather lists, is the one actively being used. That list is tracked per-crtc and currently doesn't hold any extra references. Let's grab those extra references to avoid oopsing when the connector vanishes. The list of all possible connectors should get updated when the hpd happens, but the list of actively used connectors would not get updated until the next time the fb-helper picks through the set of possible connectors. And so we need to hang on to the connectors until that time. Since we need to clean up in drm_fb_helper_crtc_free() as well, let's pull the code to a common place. And while at it let's pull in up the modeset->mode cleanup in there as well. The case of modeset->fb is a bit less clear. I'm thinking we should probably hold a reference to it, but for now I just slapped on a FIXME. v2: Cleanup things drm_fb_helper_crtc_free() too (Chris) v3: Don't leak modeset->connectors (Chris) Cc: Chris Wilson Cc: stable@vger.kernel.org Cc: Carlos Santa Cc: Kirill A. Shutemov Tested-by: Carlos Santa (v1) Tested-by: Kirill A. Shutemov (v1) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666 Signed-off-by: Ville Syrjälä Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1477492878-4990-1-git-send-email-ville.syrjala@linux.intel.com --- drivers/gpu/drm/drm_fb_helper.c | 57 ++++++++++++++++++++++++----------------- 1 file changed, 33 insertions(+), 24 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index efaccc2e1b4c..6c75e62c0b22 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -608,6 +608,24 @@ int drm_fb_helper_blank(int blank, struct fb_info *info) } EXPORT_SYMBOL(drm_fb_helper_blank); +static void drm_fb_helper_modeset_release(struct drm_fb_helper *helper, + struct drm_mode_set *modeset) +{ + int i; + + for (i = 0; i < modeset->num_connectors; i++) { + drm_connector_unreference(modeset->connectors[i]); + modeset->connectors[i] = NULL; + } + modeset->num_connectors = 0; + + drm_mode_destroy(helper->dev, modeset->mode); + modeset->mode = NULL; + + /* FIXME should hold a ref? */ + modeset->fb = NULL; +} + static void drm_fb_helper_crtc_free(struct drm_fb_helper *helper) { int i; @@ -617,10 +635,12 @@ static void drm_fb_helper_crtc_free(struct drm_fb_helper *helper) kfree(helper->connector_info[i]); } kfree(helper->connector_info); + for (i = 0; i < helper->crtc_count; i++) { - kfree(helper->crtc_info[i].mode_set.connectors); - if (helper->crtc_info[i].mode_set.mode) - drm_mode_destroy(helper->dev, helper->crtc_info[i].mode_set.mode); + struct drm_mode_set *modeset = &helper->crtc_info[i].mode_set; + + drm_fb_helper_modeset_release(helper, modeset); + kfree(modeset->connectors); } kfree(helper->crtc_info); } @@ -2095,7 +2115,6 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper) struct drm_fb_helper_crtc **crtcs; struct drm_display_mode **modes; struct drm_fb_offset *offsets; - struct drm_mode_set *modeset; bool *enabled; int width, height; int i; @@ -2143,45 +2162,35 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper) /* need to set the modesets up here for use later */ /* fill out the connector<->crtc mappings into the modesets */ - for (i = 0; i < fb_helper->crtc_count; i++) { - modeset = &fb_helper->crtc_info[i].mode_set; - modeset->num_connectors = 0; - modeset->fb = NULL; - } + for (i = 0; i < fb_helper->crtc_count; i++) + drm_fb_helper_modeset_release(fb_helper, + &fb_helper->crtc_info[i].mode_set); for (i = 0; i < fb_helper->connector_count; i++) { struct drm_display_mode *mode = modes[i]; struct drm_fb_helper_crtc *fb_crtc = crtcs[i]; struct drm_fb_offset *offset = &offsets[i]; - modeset = &fb_crtc->mode_set; + struct drm_mode_set *modeset = &fb_crtc->mode_set; if (mode && fb_crtc) { + struct drm_connector *connector = + fb_helper->connector_info[i]->connector; + DRM_DEBUG_KMS("desired mode %s set on crtc %d (%d,%d)\n", mode->name, fb_crtc->mode_set.crtc->base.id, offset->x, offset->y); + fb_crtc->desired_mode = mode; fb_crtc->x = offset->x; fb_crtc->y = offset->y; - if (modeset->mode) - drm_mode_destroy(dev, modeset->mode); modeset->mode = drm_mode_duplicate(dev, fb_crtc->desired_mode); - modeset->connectors[modeset->num_connectors++] = fb_helper->connector_info[i]->connector; + drm_connector_reference(connector); + modeset->connectors[modeset->num_connectors++] = connector; modeset->fb = fb_helper->fb; modeset->x = offset->x; modeset->y = offset->y; } } - - /* Clear out any old modes if there are no more connected outputs. */ - for (i = 0; i < fb_helper->crtc_count; i++) { - modeset = &fb_helper->crtc_info[i].mode_set; - if (modeset->num_connectors == 0) { - BUG_ON(modeset->fb); - if (modeset->mode) - drm_mode_destroy(dev, modeset->mode); - modeset->mode = NULL; - } - } out: kfree(crtcs); kfree(modes); -- cgit v1.2.3 From 36e3fa6a38e135e9478a2f75dec9bf6ff1e6480e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 26 Oct 2016 16:30:33 +0300 Subject: drm/dp/mst: Clear port->pdt when tearing down the i2c adapter MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The i2c adapter is only relevant for some peer device types, so let's clear the pdt if it's still the same as the old_pdt when we tear down the i2c adapter. I don't really like this design pattern of updating port->whatever before doing the accompanying changes and passing around old_whatever to figure stuff out. Would make much more sense to me to the pass the new value around and only update the port->whatever when things are consistent. But let's try to work with what we have right now. Quoting a follow-up from Ville: "And naturally I forgot to amend the commit message w.r.t. this guy [the change in drm_dp_destroy_port]. We don't really need to do this here, but I figured I'd try to be a bit more consistent by having it, just to avoid accidental mistakes if/when someone changes this stuff again later." v2: Clear port->pdt in the caller, if needed (Daniel) Cc: Daniel Vetter Cc: stable@vger.kernel.org Cc: Carlos Santa Cc: Kirill A. Shutemov Tested-by: Carlos Santa (v1) Tested-by: Kirill A. Shutemov (v1) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666 Signed-off-by: Ville Syrjälä Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1477488633-16544-1-git-send-email-ville.syrjala@linux.intel.com --- drivers/gpu/drm/drm_dp_mst_topology.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c index 04e457117980..ba13f9d8720b 100644 --- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -914,6 +914,7 @@ static void drm_dp_destroy_port(struct kref *kref) /* no need to clean up vcpi * as if we have no connector we never setup a vcpi */ drm_dp_port_teardown_pdt(port, port->pdt); + port->pdt = DP_PEER_DEVICE_NONE; } kfree(port); } @@ -2919,6 +2920,7 @@ static void drm_dp_destroy_connector_work(struct work_struct *work) mgr->cbs->destroy_connector(mgr, port->connector); drm_dp_port_teardown_pdt(port, port->pdt); + port->pdt = DP_PEER_DEVICE_NONE; if (!port->input && port->vcpi.vcpi > 0) { drm_dp_mst_reset_vcpi_slots(mgr, port); -- cgit v1.2.3 From 4da5caa6a6f82cda3193bca855235b87debf78bd Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 26 Oct 2016 12:05:55 +0300 Subject: drm/dp/mst: Check peer device type before attempting EDID read MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Only certain types of pdts have the DDC bus registered, so check for that before we attempt the EDID read. Othwewise we risk playing around with an i2c adapter that doesn't actually exist. Cc: stable@vger.kernel.org Cc: Carlos Santa Cc: Kirill A. Shutemov Tested-by: Carlos Santa Tested-by: Kirill A. Shutemov Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666 Signed-off-by: Ville Syrjälä Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-5-git-send-email-ville.syrjala@linux.intel.com --- drivers/gpu/drm/drm_dp_mst_topology.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c index ba13f9d8720b..aa644487749c 100644 --- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -1160,7 +1160,9 @@ static void drm_dp_add_port(struct drm_dp_mst_branch *mstb, drm_dp_put_port(port); goto out; } - if (port->port_num >= DP_MST_LOGICAL_PORT_0) { + if ((port->pdt == DP_PEER_DEVICE_DP_LEGACY_CONV || + port->pdt == DP_PEER_DEVICE_SST_SINK) && + port->port_num >= DP_MST_LOGICAL_PORT_0) { port->cached_edid = drm_get_edid(port->connector, &port->aux.ddc); drm_mode_connector_set_tile_property(port->connector); } -- cgit v1.2.3 From 49a5d73fd03528289c315d345e4917a1ba2b48e7 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Fri, 21 Oct 2016 16:55:02 +0800 Subject: drm/amdgpu: fix s3 resume back, uvd dpm randomly can't disable. the value of last_mclk_dpm_enable_mask will be changed if other clients(vce,dal) trigger set power state between enable and disable uvd dpm. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/ci_dpm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/ci_dpm.c b/drivers/gpu/drm/amd/amdgpu/ci_dpm.c index 29e6061b9087..5be788b269e2 100644 --- a/drivers/gpu/drm/amd/amdgpu/ci_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/ci_dpm.c @@ -4075,7 +4075,7 @@ static int ci_enable_uvd_dpm(struct amdgpu_device *adev, bool enable) pi->dpm_level_enable_mask.mclk_dpm_enable_mask); } } else { - if (pi->last_mclk_dpm_enable_mask & 0x1) { + if (pi->uvd_enabled) { pi->uvd_enabled = false; pi->dpm_level_enable_mask.mclk_dpm_enable_mask |= 1; amdgpu_ci_send_msg_to_smc_with_parameter(adev, -- cgit v1.2.3 From 7dc86ef5ac91642dfc3eb93ee0f0458e702a343e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 14 Oct 2016 16:38:02 -0400 Subject: drm/radeon/si_dpm: workaround for SI kickers Consolidate existing quirks. Fixes stability issues on some kickers. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/si_dpm.c | 59 ++++++++++++++++++++++++++++++----------- 1 file changed, 43 insertions(+), 16 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c index e22b11189628..c49934527a87 100644 --- a/drivers/gpu/drm/radeon/si_dpm.c +++ b/drivers/gpu/drm/radeon/si_dpm.c @@ -2999,6 +2999,49 @@ static void si_apply_state_adjust_rules(struct radeon_device *rdev, int i; struct si_dpm_quirk *p = si_dpm_quirk_list; + /* limit all SI kickers */ + if (rdev->family == CHIP_PITCAIRN) { + if ((rdev->pdev->revision == 0x81) || + (rdev->pdev->device == 0x6810) || + (rdev->pdev->device == 0x6811) || + (rdev->pdev->device == 0x6816) || + (rdev->pdev->device == 0x6817) || + (rdev->pdev->device == 0x6806)) + max_mclk = 120000; + } else if (rdev->family == CHIP_VERDE) { + if ((rdev->pdev->revision == 0x81) || + (rdev->pdev->revision == 0x83) || + (rdev->pdev->revision == 0x87) || + (rdev->pdev->device == 0x6820) || + (rdev->pdev->device == 0x6821) || + (rdev->pdev->device == 0x6822) || + (rdev->pdev->device == 0x6823) || + (rdev->pdev->device == 0x682A) || + (rdev->pdev->device == 0x682B)) { + max_sclk = 75000; + max_mclk = 80000; + } + } else if (rdev->family == CHIP_OLAND) { + if ((rdev->pdev->revision == 0xC7) || + (rdev->pdev->revision == 0x80) || + (rdev->pdev->revision == 0x81) || + (rdev->pdev->revision == 0x83) || + (rdev->pdev->device == 0x6604) || + (rdev->pdev->device == 0x6605)) { + max_sclk = 75000; + max_mclk = 80000; + } + } else if (rdev->family == CHIP_HAINAN) { + if ((rdev->pdev->revision == 0x81) || + (rdev->pdev->revision == 0x83) || + (rdev->pdev->revision == 0xC3) || + (rdev->pdev->device == 0x6664) || + (rdev->pdev->device == 0x6665) || + (rdev->pdev->device == 0x6667)) { + max_sclk = 75000; + max_mclk = 80000; + } + } /* Apply dpm quirks */ while (p && p->chip_device != 0) { if (rdev->pdev->vendor == p->chip_vendor && @@ -3011,22 +3054,6 @@ static void si_apply_state_adjust_rules(struct radeon_device *rdev, } ++p; } - /* limit mclk on all R7 370 parts for stability */ - if (rdev->pdev->device == 0x6811 && - rdev->pdev->revision == 0x81) - max_mclk = 120000; - /* limit sclk/mclk on Jet parts for stability */ - if (rdev->pdev->device == 0x6665 && - rdev->pdev->revision == 0xc3) { - max_sclk = 75000; - max_mclk = 80000; - } - /* limit clocks on HD8600 series */ - if (rdev->pdev->device == 0x6660 && - rdev->pdev->revision == 0x83) { - max_sclk = 75000; - max_mclk = 80000; - } if (rps->vce_active) { rps->evclk = rdev->pm.dpm.vce_states[rdev->pm.dpm.vce_level].evclk; -- cgit v1.2.3 From 71451bdfc2f7bc67cf0b7a5d51bc1489aaa55701 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 26 Oct 2016 15:27:45 -0400 Subject: drm/amdgpu/si_dpm: workaround for SI kickers Consolidate existing quirks. Fixes stability issues on some kickers. Acked-by: Huang Rui Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/si_dpm.c | 59 +++++++++++++++++++++++++++---------- 1 file changed, 43 insertions(+), 16 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/si_dpm.c b/drivers/gpu/drm/amd/amdgpu/si_dpm.c index ee77e9cb55b1..d6f85b1a0b93 100644 --- a/drivers/gpu/drm/amd/amdgpu/si_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/si_dpm.c @@ -3477,6 +3477,49 @@ static void si_apply_state_adjust_rules(struct amdgpu_device *adev, int i; struct si_dpm_quirk *p = si_dpm_quirk_list; + /* limit all SI kickers */ + if (adev->asic_type == CHIP_PITCAIRN) { + if ((adev->pdev->revision == 0x81) || + (adev->pdev->device == 0x6810) || + (adev->pdev->device == 0x6811) || + (adev->pdev->device == 0x6816) || + (adev->pdev->device == 0x6817) || + (adev->pdev->device == 0x6806)) + max_mclk = 120000; + } else if (adev->asic_type == CHIP_VERDE) { + if ((adev->pdev->revision == 0x81) || + (adev->pdev->revision == 0x83) || + (adev->pdev->revision == 0x87) || + (adev->pdev->device == 0x6820) || + (adev->pdev->device == 0x6821) || + (adev->pdev->device == 0x6822) || + (adev->pdev->device == 0x6823) || + (adev->pdev->device == 0x682A) || + (adev->pdev->device == 0x682B)) { + max_sclk = 75000; + max_mclk = 80000; + } + } else if (adev->asic_type == CHIP_OLAND) { + if ((adev->pdev->revision == 0xC7) || + (adev->pdev->revision == 0x80) || + (adev->pdev->revision == 0x81) || + (adev->pdev->revision == 0x83) || + (adev->pdev->device == 0x6604) || + (adev->pdev->device == 0x6605)) { + max_sclk = 75000; + max_mclk = 80000; + } + } else if (adev->asic_type == CHIP_HAINAN) { + if ((adev->pdev->revision == 0x81) || + (adev->pdev->revision == 0x83) || + (adev->pdev->revision == 0xC3) || + (adev->pdev->device == 0x6664) || + (adev->pdev->device == 0x6665) || + (adev->pdev->device == 0x6667)) { + max_sclk = 75000; + max_mclk = 80000; + } + } /* Apply dpm quirks */ while (p && p->chip_device != 0) { if (adev->pdev->vendor == p->chip_vendor && @@ -3489,22 +3532,6 @@ static void si_apply_state_adjust_rules(struct amdgpu_device *adev, } ++p; } - /* limit mclk on all R7 370 parts for stability */ - if (adev->pdev->device == 0x6811 && - adev->pdev->revision == 0x81) - max_mclk = 120000; - /* limit sclk/mclk on Jet parts for stability */ - if (adev->pdev->device == 0x6665 && - adev->pdev->revision == 0xc3) { - max_sclk = 75000; - max_mclk = 80000; - } - /* Limit clocks for some HD8600 parts */ - if (adev->pdev->device == 0x6660 && - adev->pdev->revision == 0x83) { - max_sclk = 75000; - max_mclk = 80000; - } if (rps->vce_active) { rps->evclk = adev->pm.dpm.vce_states[adev->pm.dpm.vce_level].evclk; -- cgit v1.2.3 From a2941d01267437b6edcd3e769ae9a461fe36ae62 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Wed, 26 Oct 2016 12:56:07 +0800 Subject: drm/amd/powerplay: fix bug get wrong evv voltage of Polaris. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rex Zhu Acked-by: Christian König Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c | 2 +- drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c index 1167205057b3..2ba7937d2545 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c @@ -716,7 +716,7 @@ int phm_get_voltage_evv_on_sclk(struct pp_hwmgr *hwmgr, uint8_t voltage_type, *voltage = 1150; } else { ret = atomctrl_get_voltage_evv_on_sclk_ai(hwmgr, voltage_type, sclk, id, &vol); - *voltage = (uint16_t)vol/100; + *voltage = (uint16_t)(vol/100); } return ret; } diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c index 1126bd4f74dc..0894527d932f 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c @@ -1320,7 +1320,8 @@ int atomctrl_get_voltage_evv_on_sclk_ai(struct pp_hwmgr *hwmgr, uint8_t voltage_ if (0 != result) return result; - *voltage = le32_to_cpu(((GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_3 *)(&get_voltage_info_param_space))->ulVoltageLevel); + *voltage = le32_to_cpu(((GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_3 *) + (&get_voltage_info_param_space))->ulVoltageLevel); return result; } -- cgit v1.2.3 From 9cccc76bb49ffcc0370a37a6c01368d69cc3b65b Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 15 Sep 2016 16:28:54 +0300 Subject: drm/i915: keep declarations in i915_drv.h Fix sparse warnings: drivers/gpu/drm/i915/i915_drv.c:1179:5: warning: symbol 'i915_driver_load' was not declared. Should it be static? drivers/gpu/drm/i915/i915_drv.c:1267:6: warning: symbol 'i915_driver_unload' was not declared. Should it be static? drivers/gpu/drm/i915/i915_drv.c:2444:25: warning: symbol 'i915_pm_ops' was not declared. Should it be static? Fixes: 42f5551d2769 ("drm/i915: Split out the PCI driver interface to i915_pci.c") Cc: Chris Wilson Cc: Joonas Lahtinen Reviewed-by: Daniel Vetter Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1473946137-1931-3-git-send-email-jani.nikula@intel.com (cherry picked from commit efab0698f94dd71fac5d946ad664a280441daedb) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.h | 5 +++++ drivers/gpu/drm/i915/i915_pci.c | 7 ------- 2 files changed, 5 insertions(+), 7 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 8b9ee4e390c0..685e9e065287 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2883,6 +2883,11 @@ __i915_printk(struct drm_i915_private *dev_priv, const char *level, extern long i915_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); #endif +extern const struct dev_pm_ops i915_pm_ops; + +extern int i915_driver_load(struct pci_dev *pdev, + const struct pci_device_id *ent); +extern void i915_driver_unload(struct drm_device *dev); extern int intel_gpu_reset(struct drm_i915_private *dev_priv, u32 engine_mask); extern bool intel_has_gpu_reset(struct drm_i915_private *dev_priv); extern void i915_reset(struct drm_i915_private *dev_priv); diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c index 687c768833b3..31e6edd08dd0 100644 --- a/drivers/gpu/drm/i915/i915_pci.c +++ b/drivers/gpu/drm/i915/i915_pci.c @@ -431,9 +431,6 @@ static const struct pci_device_id pciidlist[] = { }; MODULE_DEVICE_TABLE(pci, pciidlist); -extern int i915_driver_load(struct pci_dev *pdev, - const struct pci_device_id *ent); - static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct intel_device_info *intel_info = @@ -463,8 +460,6 @@ static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return i915_driver_load(pdev, ent); } -extern void i915_driver_unload(struct drm_device *dev); - static void i915_pci_remove(struct pci_dev *pdev) { struct drm_device *dev = pci_get_drvdata(pdev); @@ -473,8 +468,6 @@ static void i915_pci_remove(struct pci_dev *pdev) drm_dev_unref(dev); } -extern const struct dev_pm_ops i915_pm_ops; - static struct pci_driver i915_pci_driver = { .name = DRIVER_NAME, .id_table = pciidlist, -- cgit v1.2.3 From 7a0e17bd5d5a20784431df24601bfafec9d8ec61 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Tue, 4 Oct 2016 12:54:12 +0300 Subject: drm/i915: workaround sparse warning on variable length arrays Fix sparse warning: drivers/gpu/drm/i915/intel_device_info.c:195:31: warning: Variable length array is used. In truth the array does have constant length, but sparse is too dumb to realize. This is a bit ugly, but silence the warning no matter what. Fixes: 91bedd34abf0 ("drm/i915/bdw: Check for slice, subslice and EU count for BDW") Reviewed-by: Joonas Lahtinen Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1475574853-4178-1-git-send-email-jani.nikula@intel.com (cherry picked from commit ff64aa1e630087381511c4d25de0657824f40efa) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_device_info.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_device_info.c b/drivers/gpu/drm/i915/intel_device_info.c index 73b6858600ac..1b20e160bc1f 100644 --- a/drivers/gpu/drm/i915/intel_device_info.c +++ b/drivers/gpu/drm/i915/intel_device_info.c @@ -192,7 +192,7 @@ static void broadwell_sseu_info_init(struct drm_i915_private *dev_priv) struct sseu_dev_info *sseu = &mkwrite_device_info(dev_priv)->sseu; const int s_max = 3, ss_max = 3, eu_max = 8; int s, ss; - u32 fuse2, eu_disable[s_max]; + u32 fuse2, eu_disable[3]; /* s_max */ fuse2 = I915_READ(GEN8_FUSE2); sseu->slice_mask = (fuse2 & GEN8_F2_S_ENA_MASK) >> GEN8_F2_S_ENA_SHIFT; -- cgit v1.2.3 From 01c72d6c17dc524f04d4dbe361d214e423b35457 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 4 Oct 2016 14:37:32 -0300 Subject: drm/i915/gen9: fix DDB partitioning for multi-screen cases With the previous code we were only recomputing the DDB partitioning for the CRTCs included in the atomic commit, so any other active CRTCs would end up having their DDB registers zeroed. In this patch we make sure that the computed state starts as a copy of the current partitioning, and then we only zero the DDBs that we're actually going to recompute. How to reproduce the bug: 1 - Enable the primary plane on pipe A 2 - Enable the primary plane on pipe B 3 - Enable the cursor or sprite plane on pipe A Step 3 will zero the DDB partitioning for pipe B since it's not included in the commit that enabled the cursor or sprite for pipe A. I expect this to fix many FIFO underrun problems on gen9+. v2: - Mention the cursor on the steps to reproduce the problem (Paulo). - Add Testcase tag provided by Maarten (Maarten). Testcase: kms_cursor_legacy.cursorA-vs-flipB-atomic-transitions Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97596 Bugzilla: https://www.phoronix.com/scan.php?page=news_item&px=Intel-Skylake-Multi-Screen-Woes Cc: stable@vger.kernel.org Signed-off-by: Paulo Zanoni Reviewed-by: Lyude Link: http://patchwork.freedesktop.org/patch/msgid/1475602652-17326-1-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit 5a920b85f2c6e3fd7d9dd9bb3f3345e9085e2360) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_pm.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index a2f751cd187a..1a11ab87ec5d 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3362,13 +3362,15 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate, int num_active; int id, i; + /* Clear the partitioning for disabled planes. */ + memset(ddb->plane[pipe], 0, sizeof(ddb->plane[pipe])); + memset(ddb->y_plane[pipe], 0, sizeof(ddb->y_plane[pipe])); + if (WARN_ON(!state)) return 0; if (!cstate->base.active) { ddb->pipe[pipe].start = ddb->pipe[pipe].end = 0; - memset(ddb->plane[pipe], 0, sizeof(ddb->plane[pipe])); - memset(ddb->y_plane[pipe], 0, sizeof(ddb->y_plane[pipe])); return 0; } @@ -4050,6 +4052,12 @@ skl_compute_ddb(struct drm_atomic_state *state) intel_state->wm_results.dirty_pipes = ~0; } + /* + * We're not recomputing for the pipes not included in the commit, so + * make sure we start with the current state. + */ + memcpy(ddb, &dev_priv->wm.skl_hw.ddb, sizeof(*ddb)); + for_each_intel_crtc_mask(dev, intel_crtc, realloc_pipes) { struct intel_crtc_state *cstate; -- cgit v1.2.3 From 47ed32483e1f1fc391c78466f5fd66f03078e9e4 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 12 Oct 2016 12:48:26 +0100 Subject: drm/i915: Use fence_write() from rpm resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During rpm resume we restore the fences, but we do not have the protection of struct_mutex. This rules out updating the activity tracking on the fences, and requires us to rely on the rpm as the serialisation barrier instead. [ 350.298052] [drm:intel_runtime_resume [i915]] Resuming device [ 350.308606] [ 350.310520] =============================== [ 350.315560] [ INFO: suspicious RCU usage. ] [ 350.320554] 4.8.0-rc8-bsw-rapl+ #3133 Tainted: G U W [ 350.327208] ------------------------------- [ 350.331977] ../drivers/gpu/drm/i915/i915_gem_request.h:371 suspicious rcu_dereference_protected() usage! [ 350.342619] [ 350.342619] other info that might help us debug this: [ 350.342619] [ 350.351593] [ 350.351593] rcu_scheduler_active = 1, debug_locks = 0 [ 350.358952] 3 locks held by Xorg/320: [ 350.363077] #0: (&dev->mode_config.mutex){+.+.+.}, at: [] drm_modeset_lock_all+0x3c/0xd0 [drm] [ 350.375162] #1: (crtc_ww_class_acquire){+.+.+.}, at: [] drm_modeset_lock_all+0x46/0xd0 [drm] [ 350.387022] #2: (crtc_ww_class_mutex){+.+.+.}, at: [] drm_modeset_lock+0x36/0x110 [drm] [ 350.398236] [ 350.398236] stack backtrace: [ 350.403196] CPU: 1 PID: 320 Comm: Xorg Tainted: G U W 4.8.0-rc8-bsw-rapl+ #3133 [ 350.412457] Hardware name: Intel Corporation CHERRYVIEW C0 PLATFORM/Braswell CRB, BIOS BRAS.X64.X088.R00.1510270350 10/27/2015 [ 350.425212] 0000000000000000 ffff8801680a78c8 ffffffff81332187 ffff88016c5c5000 [ 350.433611] 0000000000000001 ffff8801680a78f8 ffffffff810ca6da ffff88016cc8b0f0 [ 350.442012] ffff88016cc80000 ffff88016cc80000 ffff880177ad0000 ffff8801680a7948 [ 350.450409] Call Trace: [ 350.453165] [] dump_stack+0x67/0x90 [ 350.458931] [] lockdep_rcu_suspicious+0xea/0x120 [ 350.466002] [] fence_update+0xbd/0x670 [i915] [ 350.472766] [] i915_gem_restore_fences+0x52/0x70 [i915] [ 350.480496] [] vlv_resume_prepare+0x72/0x570 [i915] [ 350.487839] [] intel_runtime_resume+0x102/0x210 [i915] [ 350.495442] [] pci_pm_runtime_resume+0x7f/0xb0 [ 350.502274] [] ? pci_restore_standard_config+0x40/0x40 [ 350.509883] [] __rpm_callback+0x35/0x70 [ 350.516037] [] ? pci_restore_standard_config+0x40/0x40 [ 350.523646] [] rpm_callback+0x24/0x80 [ 350.529604] [] ? pci_restore_standard_config+0x40/0x40 [ 350.537212] [] rpm_resume+0x4ad/0x740 [ 350.543161] [] __pm_runtime_resume+0x51/0x80 [ 350.549824] [] intel_runtime_pm_get+0x28/0x90 [i915] [ 350.557265] [] intel_display_power_get+0x23/0x50 [i915] [ 350.565001] [] intel_atomic_commit_tail+0xdfd/0x10b0 [i915] [ 350.573106] [] ? drm_atomic_helper_swap_state+0x159/0x300 [drm_kms_helper] [ 350.582659] [] ? _raw_spin_unlock+0x31/0x50 [ 350.589205] [] ? drm_atomic_helper_swap_state+0x159/0x300 [drm_kms_helper] [ 350.598787] [] intel_atomic_commit+0x3b5/0x500 [i915] [ 350.606319] [] ? drm_atomic_set_crtc_for_connector+0xcc/0x100 [drm] [ 350.615209] [] drm_atomic_commit+0x49/0x50 [drm] [ 350.622242] [] drm_atomic_helper_set_config+0x88/0xc0 [drm_kms_helper] [ 350.631419] [] drm_mode_set_config_internal+0x6c/0x120 [drm] [ 350.639623] [] drm_mode_setcrtc+0x22c/0x4d0 [drm] [ 350.646760] [] drm_ioctl+0x209/0x460 [drm] [ 350.653217] [] ? drm_mode_getcrtc+0x150/0x150 [drm] [ 350.660536] [] ? __lock_is_held+0x4a/0x70 [ 350.666885] [] do_vfs_ioctl+0x93/0x6b0 [ 350.672939] [] ? __fget+0x113/0x200 [ 350.678797] [] ? __fget+0x5/0x200 [ 350.684361] [] SyS_ioctl+0x44/0x80 [ 350.690030] [] do_syscall_64+0x5b/0x120 [ 350.696184] [] entry_SYSCALL64_slow_path+0x25/0x25 Note we also have to remember the lesson from commit 4fc788f5ee3d ("drm/i915: Flush delayed fence releases after reset") where we have to flush any changes to the fence on restore. v2: Replace call to release user mmaps with an assertion that they have already been zapped. Fixes: 49ef5294cda2 ("drm/i915: Move fence tracking from object to vma") Reported-by: Ville Syrjälä Signed-off-by: Chris Wilson Cc: Ville Syrjälä Cc: Joonas Lahtinen Cc: Mika Kuoppala Reviewed-by: Joonas Lahtinen Link: http://patchwork.freedesktop.org/patch/msgid/20161012114827.17031-1-chris@chris-wilson.co.uk (cherry picked from commit 4676dc838b37ed8c6f3da4571cb4a04cbd604801) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem_fence.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_gem_fence.c b/drivers/gpu/drm/i915/i915_gem_fence.c index 8df1fa7234e8..2c7ba0ee127c 100644 --- a/drivers/gpu/drm/i915/i915_gem_fence.c +++ b/drivers/gpu/drm/i915/i915_gem_fence.c @@ -290,6 +290,8 @@ i915_vma_put_fence(struct i915_vma *vma) { struct drm_i915_fence_reg *fence = vma->fence; + assert_rpm_wakelock_held(to_i915(vma->vm->dev)); + if (!fence) return 0; @@ -341,6 +343,8 @@ i915_vma_get_fence(struct i915_vma *vma) struct drm_i915_fence_reg *fence; struct i915_vma *set = i915_gem_object_is_tiled(vma->obj) ? vma : NULL; + assert_rpm_wakelock_held(to_i915(vma->vm->dev)); + /* Just update our place in the LRU if our fence is getting reused. */ if (vma->fence) { fence = vma->fence; @@ -371,6 +375,12 @@ void i915_gem_restore_fences(struct drm_device *dev) struct drm_i915_private *dev_priv = to_i915(dev); int i; + /* Note that this may be called outside of struct_mutex, by + * runtime suspend/resume. The barrier we require is enforced by + * rpm itself - all access to fences/GTT are only within an rpm + * wakeref, and to acquire that wakeref you must pass through here. + */ + for (i = 0; i < dev_priv->num_fence_regs; i++) { struct drm_i915_fence_reg *reg = &dev_priv->fence_regs[i]; struct i915_vma *vma = reg->vma; @@ -379,10 +389,17 @@ void i915_gem_restore_fences(struct drm_device *dev) * Commit delayed tiling changes if we have an object still * attached to the fence, otherwise just clear the fence. */ - if (vma && !i915_gem_object_is_tiled(vma->obj)) + if (vma && !i915_gem_object_is_tiled(vma->obj)) { + GEM_BUG_ON(!reg->dirty); + GEM_BUG_ON(vma->obj->fault_mappable); + + list_move(®->link, &dev_priv->mm.fence_list); + vma->fence = NULL; vma = NULL; + } - fence_update(reg, vma); + fence_write(reg, vma); + reg->vma = vma; } } -- cgit v1.2.3 From be4dd651ff79b9fddc46ef330afeedc6560fd1ca Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 13 Oct 2016 11:55:08 +0300 Subject: drm/i915: fix a read size argument We want to read 3 bytes here, but because the parenthesis are in the wrong place we instead read: sizeof(intel_dp->edp_dpcd) == sizeof(intel_dp->edp_dpcd) which is one byte. Fixes: fe5a66f91c88 ("drm/i915: Read PSR caps/intermediate freqs/etc. only once on eDP") Reviewed-by: Chris Wilson Cc: Signed-off-by: Dan Carpenter Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20161013085508.GJ16198@mwanda (cherry picked from commit f7170e2eb8f6bf7ef2032cc0659cd38740bf5b97) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 14a3cf0b7213..ee8aa95967de 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -3551,8 +3551,8 @@ intel_edp_init_dpcd(struct intel_dp *intel_dp) /* Read the eDP Display control capabilities registers */ if ((intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP] & DP_DPCD_DISPLAY_CONTROL_CAPABLE) && drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_DPCD_REV, - intel_dp->edp_dpcd, sizeof(intel_dp->edp_dpcd) == - sizeof(intel_dp->edp_dpcd))) + intel_dp->edp_dpcd, sizeof(intel_dp->edp_dpcd)) == + sizeof(intel_dp->edp_dpcd)) DRM_DEBUG_KMS("EDP DPCD : %*ph\n", (int) sizeof(intel_dp->edp_dpcd), intel_dp->edp_dpcd); -- cgit v1.2.3 From fd58753ead86ee289ea89fe26e1842f36e54b36c Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Thu, 13 Oct 2016 14:34:06 +0300 Subject: drm/i915: Fix mismatched INIT power domain disabling during suspend MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently the display INIT power domain disabling/enabling happens in a mismatched way in the suspend/resume_early hooks respectively. This can leave display power wells incorrectly disabled in the resume hook if the suspend sequence is aborted for some reason resulting in the suspend/resume hooks getting called but the suspend_late/resume_early hooks being skipped. In particular this change fixes "Unclaimed read from register 0x1e1204" on BYT/BSW triggered from i915_drm_resume()-> intel_pps_unlock_regs_wa() when suspending with /sys/power/pm_test set to devices. Fixes: 85e90679335f ("drm/i915: disable power wells on suspend") Cc: Ville Syrjälä Cc: David Weinehall Signed-off-by: Imre Deak Reviewed-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1476358446-11621-1-git-send-email-imre.deak@intel.com (cherry picked from commit 4c494a5769cd0de92638b25960ba0158c36088a6) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index bfb2efd8d4d4..18dfdd5c1b3b 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -1447,8 +1447,6 @@ static int i915_drm_suspend(struct drm_device *dev) dev_priv->suspend_count++; - intel_display_set_init_power(dev_priv, false); - intel_csr_ucode_suspend(dev_priv); out: @@ -1466,6 +1464,8 @@ static int i915_drm_suspend_late(struct drm_device *dev, bool hibernation) disable_rpm_wakeref_asserts(dev_priv); + intel_display_set_init_power(dev_priv, false); + fw_csr = !IS_BROXTON(dev_priv) && suspend_to_idle(dev_priv) && dev_priv->csr.dmc_payload; /* -- cgit v1.2.3 From 5e33791e1f27c3207e7b44071e7c94a487d1eb39 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Fri, 7 Oct 2016 17:28:57 -0300 Subject: drm/i915/gen9: fix watermarks when using the pipe scaler Luckily, the necessary adjustments for when we're using the scaler are exactly the same as the ones needed on ILK+, so just reuse the function we already have. v2: Invert the patch order so stable backports get easier. Cc: stable@vger.kernel.org Signed-off-by: Paulo Zanoni Reviewed-by: Matt Roper Link: http://patchwork.freedesktop.org/patch/msgid/1475872138-16194-1-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit cfd7e3a20251b9ac95651d64556f87f86128a966) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_pm.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 1a11ab87ec5d..db24f898853c 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3470,12 +3470,6 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate, return 0; } -static uint32_t skl_pipe_pixel_rate(const struct intel_crtc_state *config) -{ - /* TODO: Take into account the scalers once we support them */ - return config->base.adjusted_mode.crtc_clock; -} - /* * The max latency should be 257 (max the punit can code is 255 and we add 2us * for the read latency) and cpp should always be <= 8, so that @@ -3526,7 +3520,7 @@ static uint32_t skl_adjusted_plane_pixel_rate(const struct intel_crtc_state *cst * Adjusted plane pixel rate is just the pipe's adjusted pixel rate * with additional adjustments for plane-specific scaling. */ - adjusted_pixel_rate = skl_pipe_pixel_rate(cstate); + adjusted_pixel_rate = ilk_pipe_pixel_rate(cstate); downscale_amount = skl_plane_downscale_amount(pstate); pixel_rate = adjusted_pixel_rate * downscale_amount >> 16; @@ -3738,11 +3732,11 @@ skl_compute_linetime_wm(struct intel_crtc_state *cstate) if (!cstate->base.active) return 0; - if (WARN_ON(skl_pipe_pixel_rate(cstate) == 0)) + if (WARN_ON(ilk_pipe_pixel_rate(cstate) == 0)) return 0; return DIV_ROUND_UP(8 * cstate->base.adjusted_mode.crtc_htotal * 1000, - skl_pipe_pixel_rate(cstate)); + ilk_pipe_pixel_rate(cstate)); } static void skl_compute_transition_wm(struct intel_crtc_state *cstate, -- cgit v1.2.3 From 198c5ee3c60169f8b64bcd330a34593be80699aa Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Tue, 11 Oct 2016 20:52:45 +0300 Subject: drm/i915: Respect alternate_aux_channel for all DDI ports MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The VBT provides the platform a way to mix and match the DDI ports vs. AUX channels. Currently we only trust the VBT for DDI E, which has no corresponding AUX channel of its own. However it is possible that some board might use some non-standard DDI vs. AUX port routing even for the other ports. Perhaps for signal routing reasons or something, So let's generalize this and trust the VBT for all ports. For now we'll limit this to DDI platforms, as we trust the VBT a bit more there anyway when it comes to the DDI ports. I've structured the code in a way that would allow us to easily expand this to other platforms as well, by simply filling in the ddi_port_info. v2: Drop whitespace changes, keep MISSING_CASE() for unknown aux ch assignment, include a commit message, include debug message during init Cc: stable@vger.kernel.org Cc: Maarten Maathuis Tested-by: Maarten Maathuis References: https://bugs.freedesktop.org/show_bug.cgi?id=97877 Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-2-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jim Bride (cherry picked from commit 8f7ce038f1178057733b7e765bf9160a2f9be14b) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 71 +++++++++++++++++++++++------------------ 1 file changed, 40 insertions(+), 31 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index ee8aa95967de..3581b5a7f716 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1108,6 +1108,44 @@ intel_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg) return ret; } +static enum port intel_aux_port(struct drm_i915_private *dev_priv, + enum port port) +{ + const struct ddi_vbt_port_info *info = + &dev_priv->vbt.ddi_port_info[port]; + enum port aux_port; + + if (!info->alternate_aux_channel) { + DRM_DEBUG_KMS("using AUX %c for port %c (platform default)\n", + port_name(port), port_name(port)); + return port; + } + + switch (info->alternate_aux_channel) { + case DP_AUX_A: + aux_port = PORT_A; + break; + case DP_AUX_B: + aux_port = PORT_B; + break; + case DP_AUX_C: + aux_port = PORT_C; + break; + case DP_AUX_D: + aux_port = PORT_D; + break; + default: + MISSING_CASE(info->alternate_aux_channel); + aux_port = PORT_A; + break; + } + + DRM_DEBUG_KMS("using AUX %c for port %c (VBT)\n", + port_name(aux_port), port_name(port)); + + return aux_port; +} + static i915_reg_t g4x_aux_ctl_reg(struct drm_i915_private *dev_priv, enum port port) { @@ -1168,36 +1206,9 @@ static i915_reg_t ilk_aux_data_reg(struct drm_i915_private *dev_priv, } } -/* - * On SKL we don't have Aux for port E so we rely - * on VBT to set a proper alternate aux channel. - */ -static enum port skl_porte_aux_port(struct drm_i915_private *dev_priv) -{ - const struct ddi_vbt_port_info *info = - &dev_priv->vbt.ddi_port_info[PORT_E]; - - switch (info->alternate_aux_channel) { - case DP_AUX_A: - return PORT_A; - case DP_AUX_B: - return PORT_B; - case DP_AUX_C: - return PORT_C; - case DP_AUX_D: - return PORT_D; - default: - MISSING_CASE(info->alternate_aux_channel); - return PORT_A; - } -} - static i915_reg_t skl_aux_ctl_reg(struct drm_i915_private *dev_priv, enum port port) { - if (port == PORT_E) - port = skl_porte_aux_port(dev_priv); - switch (port) { case PORT_A: case PORT_B: @@ -1213,9 +1224,6 @@ static i915_reg_t skl_aux_ctl_reg(struct drm_i915_private *dev_priv, static i915_reg_t skl_aux_data_reg(struct drm_i915_private *dev_priv, enum port port, int index) { - if (port == PORT_E) - port = skl_porte_aux_port(dev_priv); - switch (port) { case PORT_A: case PORT_B: @@ -1253,7 +1261,8 @@ static i915_reg_t intel_aux_data_reg(struct drm_i915_private *dev_priv, static void intel_aux_reg_init(struct intel_dp *intel_dp) { struct drm_i915_private *dev_priv = to_i915(intel_dp_to_dev(intel_dp)); - enum port port = dp_to_dig_port(intel_dp)->port; + enum port port = intel_aux_port(dev_priv, + dp_to_dig_port(intel_dp)->port); int i; intel_dp->aux_ch_ctl_reg = intel_aux_ctl_reg(dev_priv, port); -- cgit v1.2.3 From 0ce140d45a8398b501934ac289aef0eb7f47c596 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Tue, 11 Oct 2016 20:52:47 +0300 Subject: drm/i915: Clean up DDI DDC/AUX CH sanitation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Now that we use the AUX and GMBUS assignment from VBT for all ports, let's clean up the sanitization of the port information a bit. Previosuly we only did this for port E, and only complained about a non-standard assignment for the other ports. But as we know that non-standard assignments are a fact of life, let's expand the sanitization to all the ports. v2: Include a commit message, fix up the comments a bit v3: Don't clobber other ports if the current port has no alternate aux ch/ddc pin Cc: stable@vger.kernel.org Cc: Maarten Maathuis Tested-by: Maarten Maathuis References: https://bugs.freedesktop.org/show_bug.cgi?id=97877 Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-4-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jim Bride (v2) (cherry picked from commit 9454fa871edf15c20a0371548b3ec0d6d944a498) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_bios.c | 122 ++++++++++++++++++++++++-------------- 1 file changed, 77 insertions(+), 45 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index c6e69e4cfa83..1f8af87c6294 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -1031,6 +1031,77 @@ static u8 translate_iboost(u8 val) return mapping[val]; } +static void sanitize_ddc_pin(struct drm_i915_private *dev_priv, + enum port port) +{ + const struct ddi_vbt_port_info *info = + &dev_priv->vbt.ddi_port_info[port]; + enum port p; + + if (!info->alternate_ddc_pin) + return; + + for_each_port_masked(p, (1 << port) - 1) { + struct ddi_vbt_port_info *i = &dev_priv->vbt.ddi_port_info[p]; + + if (info->alternate_ddc_pin != i->alternate_ddc_pin) + continue; + + DRM_DEBUG_KMS("port %c trying to use the same DDC pin (0x%x) as port %c, " + "disabling port %c DVI/HDMI support\n", + port_name(p), i->alternate_ddc_pin, + port_name(port), port_name(p)); + + /* + * If we have multiple ports supposedly sharing the + * pin, then dvi/hdmi couldn't exist on the shared + * port. Otherwise they share the same ddc bin and + * system couldn't communicate with them separately. + * + * Due to parsing the ports in alphabetical order, + * a higher port will always clobber a lower one. + */ + i->supports_dvi = false; + i->supports_hdmi = false; + i->alternate_ddc_pin = 0; + } +} + +static void sanitize_aux_ch(struct drm_i915_private *dev_priv, + enum port port) +{ + const struct ddi_vbt_port_info *info = + &dev_priv->vbt.ddi_port_info[port]; + enum port p; + + if (!info->alternate_aux_channel) + return; + + for_each_port_masked(p, (1 << port) - 1) { + struct ddi_vbt_port_info *i = &dev_priv->vbt.ddi_port_info[p]; + + if (info->alternate_aux_channel != i->alternate_aux_channel) + continue; + + DRM_DEBUG_KMS("port %c trying to use the same AUX CH (0x%x) as port %c, " + "disabling port %c DP support\n", + port_name(p), i->alternate_aux_channel, + port_name(port), port_name(p)); + + /* + * If we have multiple ports supposedlt sharing the + * aux channel, then DP couldn't exist on the shared + * port. Otherwise they share the same aux channel + * and system couldn't communicate with them separately. + * + * Due to parsing the ports in alphabetical order, + * a higher port will always clobber a lower one. + */ + i->supports_dp = false; + i->alternate_aux_channel = 0; + } +} + static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port, const struct bdb_header *bdb) { @@ -1105,54 +1176,15 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port, DRM_DEBUG_KMS("Port %c is internal DP\n", port_name(port)); if (is_dvi) { - if (port == PORT_E) { - info->alternate_ddc_pin = ddc_pin; - /* if DDIE share ddc pin with other port, then - * dvi/hdmi couldn't exist on the shared port. - * Otherwise they share the same ddc bin and system - * couldn't communicate with them seperately. */ - if (ddc_pin == DDC_PIN_B) { - dev_priv->vbt.ddi_port_info[PORT_B].supports_dvi = 0; - dev_priv->vbt.ddi_port_info[PORT_B].supports_hdmi = 0; - } else if (ddc_pin == DDC_PIN_C) { - dev_priv->vbt.ddi_port_info[PORT_C].supports_dvi = 0; - dev_priv->vbt.ddi_port_info[PORT_C].supports_hdmi = 0; - } else if (ddc_pin == DDC_PIN_D) { - dev_priv->vbt.ddi_port_info[PORT_D].supports_dvi = 0; - dev_priv->vbt.ddi_port_info[PORT_D].supports_hdmi = 0; - } - } else if (ddc_pin == DDC_PIN_B && port != PORT_B) - DRM_DEBUG_KMS("Unexpected DDC pin for port B\n"); - else if (ddc_pin == DDC_PIN_C && port != PORT_C) - DRM_DEBUG_KMS("Unexpected DDC pin for port C\n"); - else if (ddc_pin == DDC_PIN_D && port != PORT_D) - DRM_DEBUG_KMS("Unexpected DDC pin for port D\n"); + info->alternate_ddc_pin = ddc_pin; + + sanitize_ddc_pin(dev_priv, port); } if (is_dp) { - if (port == PORT_E) { - info->alternate_aux_channel = aux_channel; - /* if DDIE share aux channel with other port, then - * DP couldn't exist on the shared port. Otherwise - * they share the same aux channel and system - * couldn't communicate with them seperately. */ - if (aux_channel == DP_AUX_A) - dev_priv->vbt.ddi_port_info[PORT_A].supports_dp = 0; - else if (aux_channel == DP_AUX_B) - dev_priv->vbt.ddi_port_info[PORT_B].supports_dp = 0; - else if (aux_channel == DP_AUX_C) - dev_priv->vbt.ddi_port_info[PORT_C].supports_dp = 0; - else if (aux_channel == DP_AUX_D) - dev_priv->vbt.ddi_port_info[PORT_D].supports_dp = 0; - } - else if (aux_channel == DP_AUX_A && port != PORT_A) - DRM_DEBUG_KMS("Unexpected AUX channel for port A\n"); - else if (aux_channel == DP_AUX_B && port != PORT_B) - DRM_DEBUG_KMS("Unexpected AUX channel for port B\n"); - else if (aux_channel == DP_AUX_C && port != PORT_C) - DRM_DEBUG_KMS("Unexpected AUX channel for port C\n"); - else if (aux_channel == DP_AUX_D && port != PORT_D) - DRM_DEBUG_KMS("Unexpected AUX channel for port D\n"); + info->alternate_aux_channel = aux_channel; + + sanitize_aux_ch(dev_priv, port); } if (bdb->version >= 158) { -- cgit v1.2.3 From 1fb3672eaf6ec95fb34c22734feffd6041531c5b Mon Sep 17 00:00:00 2001 From: Daniel Stone Date: Fri, 21 Oct 2016 15:44:54 +0100 Subject: drm: i915: Wait for fences on new fb, not old The previous code would wait for fences on the framebuffer from the old plane state to complete, rather than the new, so you would see tearing everywhere. Fix this to wait on the new state before we make it active. Signed-off-by: Daniel Stone Fixes: 94f050246b42 ("drm/i915: nonblocking commit") Cc: stable@vger.kernel.org Cc: Daniel Vetter Cc: Maarten Lankhorst Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20161021144454.6288-1-daniels@collabora.com (cherry picked from commit 2d2c5ad83f772d7d7b0bb8348ecea42e88f89ab0) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index fbcfed63a76e..319191e6988c 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -14310,7 +14310,7 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state) for_each_plane_in_state(state, plane, plane_state, i) { struct intel_plane_state *intel_plane_state = - to_intel_plane_state(plane_state); + to_intel_plane_state(plane->state); if (!intel_plane_state->wait_req) continue; -- cgit v1.2.3 From e3b9e6e3a989904ae062e7a48a9431edc837ea6b Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Fri, 21 Oct 2016 13:55:45 -0200 Subject: drm/i915/fbc: fix CFB size calculation for gen8+ MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Broadwell and newer actually compress up to 2560 lines instead of 2048 (as documented in the FBC_CTL page). If we don't take this into consideration we end up reserving too little stolen memory for the CFB, so we may allocate something else (such as a ring) right after what we reserved, and the hardware will overwrite it with the contents of the CFB when FBC is active, causing GPU hangs. Another possibility is that the CFB may be allocated at the very end of the available space, so the CFB will overlap the reserved stolen area, leading to FIFO underruns. This bug has always been a problem on BDW (the only affected platform where FBC is enabled by default), but it's much easier to reproduce since the following commit: commit c58b735fc762e891481e92af7124b85cb0a51fce Author: Chris Wilson Date: Thu Aug 18 17:16:57 2016 +0100 drm/i915: Allocate rings from stolen Of course, you can only reproduce the bug if your screen is taller than 2048 lines. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98213 Fixes: a98ee79317b4 ("drm/i915/fbc: enable FBC by default on HSW and BDW") Cc: # v4.6+ Signed-off-by: Paulo Zanoni Reviewed-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1477065346-13736-1-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit 79f2624b1b9f776b173b41d743fb3dd7374b3827) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_fbc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_fbc.c b/drivers/gpu/drm/i915/intel_fbc.c index faa67624e1ed..c43dd9abce79 100644 --- a/drivers/gpu/drm/i915/intel_fbc.c +++ b/drivers/gpu/drm/i915/intel_fbc.c @@ -104,8 +104,10 @@ static int intel_fbc_calculate_cfb_size(struct drm_i915_private *dev_priv, int lines; intel_fbc_get_plane_source_size(cache, NULL, &lines); - if (INTEL_INFO(dev_priv)->gen >= 7) + if (INTEL_GEN(dev_priv) == 7) lines = min(lines, 2048); + else if (INTEL_GEN(dev_priv) >= 8) + lines = min(lines, 2560); /* Hardware needs the full buffer stride, not just the active area. */ return lines * cache->fb.stride; -- cgit v1.2.3 From 6d9deb910c8eee8728129326dc88ec109b03b135 Mon Sep 17 00:00:00 2001 From: Tvrtko Ursulin Date: Tue, 25 Oct 2016 17:40:35 +0100 Subject: drm/i915: Rotated view does not need a fence We do not need to set up a fence for the rotated view. Display does not need it and no one can access it. v2: Move code to __i915_vma_set_map_and_fenceable. (Chris Wilson) Signed-off-by: Tvrtko Ursulin Fixes: 05a20d098db1 ("drm/i915: Move map-and-fenceable tracking to the VMA") Cc: Chris Wilson Cc: Joonas Lahtinen Reviewed-by: Chris Wilson (cherry picked from commit 07ee2bce6a516e0218dba22581803cb8f11bcf82) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 947e82c2b175..e1053c4949f4 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3745,7 +3745,12 @@ void __i915_vma_set_map_and_fenceable(struct i915_vma *vma) mappable = (vma->node.start + fence_size <= dev_priv->ggtt.mappable_end); - if (mappable && fenceable) + /* + * Explicitly disable for rotated VMA since the display does not + * need the fence and the VMA is not accessible to other users. + */ + if (mappable && fenceable && + vma->ggtt_view.type != I915_GGTT_VIEW_ROTATED) vma->flags |= I915_VMA_CAN_FENCE; else vma->flags &= ~I915_VMA_CAN_FENCE; -- cgit v1.2.3 From 7e9b3f95d64165f37c6448fe624d835c5adf17b9 Mon Sep 17 00:00:00 2001 From: Tvrtko Ursulin Date: Tue, 25 Oct 2016 17:41:12 +0100 Subject: drm/i915: Remove two invalid warns MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Objects can have multiple VMAs used for display in which case assertion that objects must not be pinned for display more times than the current VMA is incorrect. v2: Commit message update. (Chris Wilson) Signed-off-by: Tvrtko Ursulin Fixes: 058d88c4330f ("drm/i915: Track pinned VMA") Cc: Chris Wilson Cc: Joonas Lahtinen Cc: Ville Syrjälä Reviewed-by: Chris Wilson Link: http://patchwork.freedesktop.org/patch/msgid/1477413635-3876-1-git-send-email-tvrtko.ursulin@linux.intel.com (cherry picked from commit 3299e7e43484a85eeb5c7ec09958bff05c9d0543) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index e1053c4949f4..23960de81b57 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3550,8 +3550,6 @@ i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, vma->display_alignment = max_t(u64, vma->display_alignment, alignment); - WARN_ON(obj->pin_display > i915_vma_pin_count(vma)); - i915_gem_object_flush_cpu_write_domain(obj); old_write_domain = obj->base.write_domain; @@ -3588,7 +3586,6 @@ i915_gem_object_unpin_from_display_plane(struct i915_vma *vma) list_move_tail(&vma->vm_link, &vma->vm->inactive_list); i915_vma_unpin(vma); - WARN_ON(vma->obj->pin_display > i915_vma_pin_count(vma)); } /** -- cgit v1.2.3 From c89d5454d48e3b6ecae1c9f8bb14b3fac64d9fc8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 24 Oct 2016 19:13:04 +0300 Subject: drm/i915: Fix SKL+ 90/270 degree rotated plane coordinate computation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Pass the framebuffer size in .16 fixed point coordinates to drm_rect_rotate() since that's what the source coordinates are as well at this stage. We used to do this part of the computation in integer coordinates, but that got changed when moving the computation to happen in the check phase of the operation. Unfortunately I forgot to shift up the fb width and height appropriately. With the bogus size we ended up with some negative fb offset, which when added to the vma offset caused out scanout to start at an offset earlier than we inteded. Eg. when testing on my SKL I saw a row of incorrect tiles at the top of my screen. Cc: Tvrtko Ursulin Cc: Sivakumar Thulasimani Cc: drm-intel-fixes@lists.freedesktop.org Fixes: b63a16f6cd89 ("drm/i915: Compute display surface offset in the plane check hook for SKL+") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1477325584-23679-1-git-send-email-ville.syrjala@linux.intel.com Tested-by: Tvrtko Ursulin Reviewed-by: Chris Wilson (cherry picked from commit da064b47c0b8d0dff1905b38c76e7e51fb5a9547) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 319191e6988c..0ad1879bfd9d 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2978,7 +2978,8 @@ int skl_check_plane_surface(struct intel_plane_state *plane_state) /* Rotate src coordinates to match rotated GTT view */ if (intel_rotation_90_or_270(rotation)) drm_rect_rotate(&plane_state->base.src, - fb->width, fb->height, DRM_ROTATE_270); + fb->width << 16, fb->height << 16, + DRM_ROTATE_270); /* * Handle the AUX surface first since -- cgit v1.2.3 From 646cccb55b26b95b981ea9a63512260d0c21cac3 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 26 Oct 2016 16:41:39 -0400 Subject: drm/amdgpu: add support for new smc firmware on tonga Newer tonga parts require new smc firmware. Reviewed-by: Huang Rui Reviewed-by: Eric Huang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c | 6 +++++- drivers/gpu/drm/amd/amdgpu/vi.c | 1 + 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c index 7a8bfa34682f..d1267ea1d631 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c @@ -798,7 +798,11 @@ static int amdgpu_cgs_get_firmware_info(struct cgs_device *cgs_device, strcpy(fw_name, "amdgpu/topaz_smc.bin"); break; case CHIP_TONGA: - strcpy(fw_name, "amdgpu/tonga_smc.bin"); + if (((adev->pdev->device == 0x6939) && (adev->pdev->revision == 0xf1)) || + ((adev->pdev->device == 0x6938) && (adev->pdev->revision == 0xf1))) + strcpy(fw_name, "amdgpu/tonga_k_smc.bin"); + else + strcpy(fw_name, "amdgpu/tonga_smc.bin"); break; case CHIP_FIJI: strcpy(fw_name, "amdgpu/fiji_smc.bin"); diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c index 7c13090df7c0..12404fc47520 100644 --- a/drivers/gpu/drm/amd/amdgpu/vi.c +++ b/drivers/gpu/drm/amd/amdgpu/vi.c @@ -81,6 +81,7 @@ MODULE_FIRMWARE("amdgpu/topaz_smc.bin"); MODULE_FIRMWARE("amdgpu/tonga_smc.bin"); +MODULE_FIRMWARE("amdgpu/tonga_k_smc.bin"); MODULE_FIRMWARE("amdgpu/fiji_smc.bin"); MODULE_FIRMWARE("amdgpu/polaris10_smc.bin"); MODULE_FIRMWARE("amdgpu/polaris10_smc_sk.bin"); -- cgit v1.2.3 From 3b496626ee8f07919256a4e99cddf42ecd4ba891 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 27 Oct 2016 18:33:00 -0400 Subject: drm/amdgpu: add support for new smc firmware on iceland Newer iceland parts require new smc firmware. Reviewed-by: Huang Rui Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c | 7 ++++++- drivers/gpu/drm/amd/amdgpu/vi.c | 1 + 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c index d1267ea1d631..662976292535 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c @@ -795,7 +795,12 @@ static int amdgpu_cgs_get_firmware_info(struct cgs_device *cgs_device, if (!adev->pm.fw) { switch (adev->asic_type) { case CHIP_TOPAZ: - strcpy(fw_name, "amdgpu/topaz_smc.bin"); + if (((adev->pdev->device == 0x6900) && (adev->pdev->revision == 0x81)) || + ((adev->pdev->device == 0x6900) && (adev->pdev->revision == 0x83)) || + ((adev->pdev->device == 0x6907) && (adev->pdev->revision == 0x87))) + strcpy(fw_name, "amdgpu/topaz_k_smc.bin"); + else + strcpy(fw_name, "amdgpu/topaz_smc.bin"); break; case CHIP_TONGA: if (((adev->pdev->device == 0x6939) && (adev->pdev->revision == 0xf1)) || diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c index 12404fc47520..f62f1a74f890 100644 --- a/drivers/gpu/drm/amd/amdgpu/vi.c +++ b/drivers/gpu/drm/amd/amdgpu/vi.c @@ -80,6 +80,7 @@ #include "dce_virtual.h" MODULE_FIRMWARE("amdgpu/topaz_smc.bin"); +MODULE_FIRMWARE("amdgpu/topaz_k_smc.bin"); MODULE_FIRMWARE("amdgpu/tonga_smc.bin"); MODULE_FIRMWARE("amdgpu/tonga_k_smc.bin"); MODULE_FIRMWARE("amdgpu/fiji_smc.bin"); -- cgit v1.2.3 From 066f1f0b4719eb4573ef09bfc63c2bbb6f7676ca Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 31 Oct 2016 10:41:49 -0400 Subject: drm/radeon: disable runtime pm in certain cases MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the platform does not support hybrid graphics or ATPX dGPU power control. bug: https://bugzilla.kernel.org/show_bug.cgi?id=51381 Acked-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_device.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index eb92aef46e3c..621af069a3d2 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -104,6 +104,14 @@ static const char radeon_family_name[][16] = { "LAST", }; +#if defined(CONFIG_VGA_SWITCHEROO) +bool radeon_has_atpx_dgpu_power_cntl(void); +bool radeon_is_atpx_hybrid(void); +#else +static inline bool radeon_has_atpx_dgpu_power_cntl(void) { return false; } +static inline bool radeon_is_atpx_hybrid(void) { return false; } +#endif + #define RADEON_PX_QUIRK_DISABLE_PX (1 << 0) #define RADEON_PX_QUIRK_LONG_WAKEUP (1 << 1) @@ -160,6 +168,11 @@ static void radeon_device_handle_px_quirks(struct radeon_device *rdev) if (rdev->px_quirk_flags & RADEON_PX_QUIRK_DISABLE_PX) rdev->flags &= ~RADEON_IS_PX; + + /* disable PX is the system doesn't support dGPU power control or hybrid gfx */ + if (!radeon_is_atpx_hybrid() && + !radeon_has_atpx_dgpu_power_cntl()) + rdev->flags &= ~RADEON_IS_PX; } /** -- cgit v1.2.3 From 84b1528e8cef55274f0df20e93513b3060ce495a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 31 Oct 2016 11:02:31 -0400 Subject: drm/amdgpu: disable runtime pm in certain cases MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the platform does not support hybrid graphics or ATPX dGPU power control. Acked-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c index 203d98b00555..3938fca1ea8e 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c @@ -99,6 +99,8 @@ int amdgpu_driver_load_kms(struct drm_device *dev, unsigned long flags) if ((amdgpu_runtime_pm != 0) && amdgpu_has_atpx() && + (amdgpu_is_atpx_hybrid() || + amdgpu_has_atpx_dgpu_power_cntl()) && ((flags & AMD_IS_APU) == 0)) flags |= AMD_IS_PX; -- cgit v1.2.3 From 0a6e21056eaa859353945c4b164f3ef574d84271 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Mon, 31 Oct 2016 12:19:39 -0400 Subject: drm/radeon: Fix kernel panic on shutdown Since commit a481daa88fd4 ("drm/radeon: always apply pci shutdown callbacks"), a Dell Latitude D600 laptop has crashed on shutdown. The PCI Identification of the graphics adapter is "VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV250/M9 GL [Mobility FireGL 9000/Radeon 9000] [1002:4c66] (rev 01)". Prior to commit b0c80bd5d2e3 ("drm/radeon: fix up dp aux tear down (v2)"), I have no idea where the panic happened as the screen was blanked before the crash. Since that more recent change, the panic has been in routine radeon_connector_unregister(), and has been shown to be due to a NULL value in the ddc_bus member of struct drm_connector. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=178421 Fixes: a481daa88fd4 ("drm/radeon: always apply pci shutdown callbacks") Signed-off-by: Larry Finger Cc: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_connectors.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index e18839d52e3e..27affbde058c 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -931,7 +931,7 @@ static void radeon_connector_unregister(struct drm_connector *connector) { struct radeon_connector *radeon_connector = to_radeon_connector(connector); - if (radeon_connector->ddc_bus->has_aux) { + if (radeon_connector->ddc_bus && radeon_connector->ddc_bus->has_aux) { drm_dp_aux_unregister(&radeon_connector->ddc_bus->aux); radeon_connector->ddc_bus->has_aux = false; } -- cgit v1.2.3 From eef2b41122425dbddd16d70371bd000f601161d6 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 31 Oct 2016 12:27:52 -0400 Subject: drm/amdgpu: make sure ddc_bus is valid in connector unregister This should only happen on boards TV connectors which do not have a ddc bus for those connectors. None of the asics supported by amdgpu support tv, so we shouldn't hit this, but check to be on the safe side (e.g., bios bug for example). Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c index e3281d4e3e41..086aa5c9c634 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c @@ -769,7 +769,7 @@ static void amdgpu_connector_unregister(struct drm_connector *connector) { struct amdgpu_connector *amdgpu_connector = to_amdgpu_connector(connector); - if (amdgpu_connector->ddc_bus->has_aux) { + if (amdgpu_connector->ddc_bus && amdgpu_connector->ddc_bus->has_aux) { drm_dp_aux_unregister(&amdgpu_connector->ddc_bus->aux); amdgpu_connector->ddc_bus->has_aux = false; } -- cgit v1.2.3 From 91efdb2718e0c5ff014f0cf98cac99f088a9a4d2 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sat, 29 Oct 2016 23:32:44 +0300 Subject: drm/amd/powerplay: don't succeed in getters if fan is missing Otherwise callers end up using uninitialized data. Reviewed-by: Edward O'Callaghan Signed-off-by: Grazvydas Ignotas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c index fb6c6f6106d5..29d0319b22e6 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c @@ -30,7 +30,7 @@ int smu7_fan_ctrl_get_fan_speed_info(struct pp_hwmgr *hwmgr, struct phm_fan_speed_info *fan_speed_info) { if (hwmgr->thermal_controller.fanInfo.bNoFan) - return 0; + return -ENODEV; fan_speed_info->supports_percent_read = true; fan_speed_info->supports_percent_write = true; @@ -60,7 +60,7 @@ int smu7_fan_ctrl_get_fan_speed_percent(struct pp_hwmgr *hwmgr, uint64_t tmp64; if (hwmgr->thermal_controller.fanInfo.bNoFan) - return 0; + return -ENODEV; duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL1, FMAX_DUTY100); @@ -89,7 +89,7 @@ int smu7_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed) if (hwmgr->thermal_controller.fanInfo.bNoFan || (hwmgr->thermal_controller.fanInfo. ucTachometerPulsesPerRevolution == 0)) - return 0; + return -ENODEV; tach_period = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_TACH_STATUS, TACH_PERIOD); -- cgit v1.2.3 From c24784f01549ecdf23fc00d0588423bcf8956714 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Fri, 28 Oct 2016 17:04:07 +0200 Subject: drm/amd: fix scheduler fence teardown order v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some fences might be alive even after we have stopped the scheduler leading to warnings about leaked objects from the SLUB allocator. Fix this by allocating/freeing the SLUB allocator from the module init/fini functions just like we do it for hw fences. v2: make variable static, add link to bug Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=97500 Reported-by: Grazvydas Ignotas Signed-off-by: Christian König Reviewed-by: Alex Deucher (v1) Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 2 ++ drivers/gpu/drm/amd/scheduler/gpu_scheduler.c | 13 ------------- drivers/gpu/drm/amd/scheduler/gpu_scheduler.h | 6 +++--- drivers/gpu/drm/amd/scheduler/sched_fence.c | 19 +++++++++++++++++++ 4 files changed, 24 insertions(+), 16 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 71ed27eb3dde..73f2415630f8 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -737,6 +737,7 @@ static int __init amdgpu_init(void) { amdgpu_sync_init(); amdgpu_fence_slab_init(); + amd_sched_fence_slab_init(); if (vgacon_text_force()) { DRM_ERROR("VGACON disables amdgpu kernel modesetting.\n"); return -EINVAL; @@ -756,6 +757,7 @@ static void __exit amdgpu_exit(void) drm_pci_exit(driver, pdriver); amdgpu_unregister_atpx_handler(); amdgpu_sync_fini(); + amd_sched_fence_slab_fini(); amdgpu_fence_slab_fini(); } diff --git a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c index 910b8d5b21c5..ffe1f85ce300 100644 --- a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c +++ b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c @@ -34,9 +34,6 @@ static bool amd_sched_entity_is_ready(struct amd_sched_entity *entity); static void amd_sched_wakeup(struct amd_gpu_scheduler *sched); static void amd_sched_process_job(struct fence *f, struct fence_cb *cb); -struct kmem_cache *sched_fence_slab; -atomic_t sched_fence_slab_ref = ATOMIC_INIT(0); - /* Initialize a given run queue struct */ static void amd_sched_rq_init(struct amd_sched_rq *rq) { @@ -618,13 +615,6 @@ int amd_sched_init(struct amd_gpu_scheduler *sched, INIT_LIST_HEAD(&sched->ring_mirror_list); spin_lock_init(&sched->job_list_lock); atomic_set(&sched->hw_rq_count, 0); - if (atomic_inc_return(&sched_fence_slab_ref) == 1) { - sched_fence_slab = kmem_cache_create( - "amd_sched_fence", sizeof(struct amd_sched_fence), 0, - SLAB_HWCACHE_ALIGN, NULL); - if (!sched_fence_slab) - return -ENOMEM; - } /* Each scheduler will run on a seperate kernel thread */ sched->thread = kthread_run(amd_sched_main, sched, sched->name); @@ -645,7 +635,4 @@ void amd_sched_fini(struct amd_gpu_scheduler *sched) { if (sched->thread) kthread_stop(sched->thread); - rcu_barrier(); - if (atomic_dec_and_test(&sched_fence_slab_ref)) - kmem_cache_destroy(sched_fence_slab); } diff --git a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h index 7cbbbfb502ef..51068e6c3d9a 100644 --- a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h +++ b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h @@ -30,9 +30,6 @@ struct amd_gpu_scheduler; struct amd_sched_rq; -extern struct kmem_cache *sched_fence_slab; -extern atomic_t sched_fence_slab_ref; - /** * A scheduler entity is a wrapper around a job queue or a group * of other entities. Entities take turns emitting jobs from their @@ -145,6 +142,9 @@ void amd_sched_entity_fini(struct amd_gpu_scheduler *sched, struct amd_sched_entity *entity); void amd_sched_entity_push_job(struct amd_sched_job *sched_job); +int amd_sched_fence_slab_init(void); +void amd_sched_fence_slab_fini(void); + struct amd_sched_fence *amd_sched_fence_create( struct amd_sched_entity *s_entity, void *owner); void amd_sched_fence_scheduled(struct amd_sched_fence *fence); diff --git a/drivers/gpu/drm/amd/scheduler/sched_fence.c b/drivers/gpu/drm/amd/scheduler/sched_fence.c index 3653b5a40494..88fc2d662579 100644 --- a/drivers/gpu/drm/amd/scheduler/sched_fence.c +++ b/drivers/gpu/drm/amd/scheduler/sched_fence.c @@ -27,6 +27,25 @@ #include #include "gpu_scheduler.h" +static struct kmem_cache *sched_fence_slab; + +int amd_sched_fence_slab_init(void) +{ + sched_fence_slab = kmem_cache_create( + "amd_sched_fence", sizeof(struct amd_sched_fence), 0, + SLAB_HWCACHE_ALIGN, NULL); + if (!sched_fence_slab) + return -ENOMEM; + + return 0; +} + +void amd_sched_fence_slab_fini(void) +{ + rcu_barrier(); + kmem_cache_destroy(sched_fence_slab); +} + struct amd_sched_fence *amd_sched_fence_create(struct amd_sched_entity *entity, void *owner) { -- cgit v1.2.3 From 245ae5e915853ced749eb47a343749cf0a9c4109 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Fri, 28 Oct 2016 17:39:08 +0200 Subject: drm/amdgpu: add some error handling to amdgpu_init v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Just to be clean should we ever run into -ENOMEM during module init. v2: fix typo in commit message Signed-off-by: Christian König Reviewed-by: Alex Deucher (v1) Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 73f2415630f8..02ff0747197c 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -735,9 +735,20 @@ static struct pci_driver amdgpu_kms_pci_driver = { static int __init amdgpu_init(void) { - amdgpu_sync_init(); - amdgpu_fence_slab_init(); - amd_sched_fence_slab_init(); + int r; + + r = amdgpu_sync_init(); + if (r) + goto error_sync; + + r = amdgpu_fence_slab_init(); + if (r) + goto error_fence; + + r = amd_sched_fence_slab_init(); + if (r) + goto error_sched; + if (vgacon_text_force()) { DRM_ERROR("VGACON disables amdgpu kernel modesetting.\n"); return -EINVAL; @@ -749,6 +760,15 @@ static int __init amdgpu_init(void) amdgpu_register_atpx_handler(); /* let modprobe override vga console setting */ return drm_pci_init(driver, pdriver); + +error_sched: + amdgpu_fence_slab_fini(); + +error_fence: + amdgpu_sync_fini(); + +error_sync: + return r; } static void __exit amdgpu_exit(void) -- cgit v1.2.3 From b0a6af8b34c9ad20894aa46f85f4bf59d444f286 Mon Sep 17 00:00:00 2001 From: Peter Wu Date: Mon, 31 Oct 2016 23:48:22 +0100 Subject: drm/nouveau/acpi: fix check for power resources support Check whether the kernel really supports power resources for a device, otherwise the power might not be removed when the device is runtime suspended (DSM should still work in these cases where PR does not). This is a workaround for a problem where ACPICA and Windows 10 differ in behavior. ACPICA does not correctly enumerate power resources within a conditional block (due to delayed execution of such blocks) and as a result power_resources is set to false even if _PR3 exists. Fixes: 692a17dcc292 ("drm/nouveau/acpi: fix lockup with PCIe runtime PM") Link: https://bugs.freedesktop.org/show_bug.cgi?id=98398 Reported-and-tested-by: Rick Kerkhof Reviewed-by: Mika Westerberg Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Peter Wu Signed-off-by: Dave Airlie --- drivers/gpu/drm/nouveau/nouveau_acpi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c index dc57b628e074..193573d191e5 100644 --- a/drivers/gpu/drm/nouveau/nouveau_acpi.c +++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c @@ -240,7 +240,8 @@ static bool nouveau_pr3_present(struct pci_dev *pdev) if (!parent_adev) return false; - return acpi_has_method(parent_adev->handle, "_PR3"); + return parent_adev->power.flags.power_resources && + acpi_has_method(parent_adev->handle, "_PR3"); } static void nouveau_dsm_pci_probe(struct pci_dev *pdev, acpi_handle *dhandle_out, -- cgit v1.2.3 From 8d23ea403044efe97553dd64228b172c8ffca047 Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Tue, 25 Oct 2016 12:17:59 +0530 Subject: drm/msm/dsi: Queue HPD helper work in attach/detach callbacks The msm/dsi host drivers calls drm_helper_hpd_irq_event in the mipi_dsi_host attach/detatch callbacks. mipi_dsi_attach()/mipi_dsi_detach() from a panel/bridge driver could be called from a context where the drm_device's mode_config.mutex is already held, resulting in a deadlock. Queue it as work instead. Signed-off-by: Archit Taneja Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/dsi_host.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index f05ed0e1f3d6..6f240021705b 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -139,6 +139,7 @@ struct msm_dsi_host { u32 err_work_state; struct work_struct err_work; + struct work_struct hpd_work; struct workqueue_struct *workqueue; /* DSI 6G TX buffer*/ @@ -1294,6 +1295,14 @@ static void dsi_sw_reset_restore(struct msm_dsi_host *msm_host) wmb(); /* make sure dsi controller enabled again */ } +static void dsi_hpd_worker(struct work_struct *work) +{ + struct msm_dsi_host *msm_host = + container_of(work, struct msm_dsi_host, hpd_work); + + drm_helper_hpd_irq_event(msm_host->dev); +} + static void dsi_err_worker(struct work_struct *work) { struct msm_dsi_host *msm_host = @@ -1480,7 +1489,7 @@ static int dsi_host_attach(struct mipi_dsi_host *host, DBG("id=%d", msm_host->id); if (msm_host->dev) - drm_helper_hpd_irq_event(msm_host->dev); + queue_work(msm_host->workqueue, &msm_host->hpd_work); return 0; } @@ -1494,7 +1503,7 @@ static int dsi_host_detach(struct mipi_dsi_host *host, DBG("id=%d", msm_host->id); if (msm_host->dev) - drm_helper_hpd_irq_event(msm_host->dev); + queue_work(msm_host->workqueue, &msm_host->hpd_work); return 0; } @@ -1748,6 +1757,7 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi) /* setup workqueue */ msm_host->workqueue = alloc_ordered_workqueue("dsi_drm_work", 0); INIT_WORK(&msm_host->err_work, dsi_err_worker); + INIT_WORK(&msm_host->hpd_work, dsi_hpd_worker); msm_dsi->host = &msm_host->base; msm_dsi->id = msm_host->id; -- cgit v1.2.3 From 73b65b197024f3f9ef16a28cc9533c011e0a3f6d Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Thu, 27 Oct 2016 11:57:15 +0530 Subject: drm/msm: Set CLK_IGNORE_UNUSED flag for PLL clocks The DSI/HDMI PLLs in MSM require resources like interface clocks, power domains to be enabled before we can access their registers. The clock framework doesn't have a mechanism at the moment where we can tie such resources to a clock, so we make sure that the KMS driver enables these resources whenever a PLL is expected to be in use. One place where we can't ensure the resource dependencies are met is when the clock framework tries to disable unused clocks. The KMS driver doesn't know when the clock framework calls the is_enabled clk_op, and hence can't enable interface clocks/power domains beforehand. We set the CLK_IGNORE_UNUSED flag for PLL clocks for now. This needs to be revisited, since bootloaders can enable display, and we would want to disable the PLL clocks if there isn't a display driver using them. Cc: Stephen Boyd Signed-off-by: Archit Taneja Acked-by: Stephen Boyd Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c | 1 + drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c | 1 + drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c | 1 + drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c | 1 + 4 files changed, 4 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c index 598fdaff0a41..26e3a01a99c2 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c @@ -521,6 +521,7 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm) .parent_names = (const char *[]){ "xo" }, .num_parents = 1, .name = vco_name, + .flags = CLK_IGNORE_UNUSED, .ops = &clk_ops_dsi_pll_28nm_vco, }; struct device *dev = &pll_28nm->pdev->dev; diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c index 38c90e1eb002..49008451085b 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c @@ -412,6 +412,7 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm) struct clk_init_data vco_init = { .parent_names = (const char *[]){ "pxo" }, .num_parents = 1, + .flags = CLK_IGNORE_UNUSED, .ops = &clk_ops_dsi_pll_28nm_vco, }; struct device *dev = &pll_28nm->pdev->dev; diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c index aa94a553794f..143eab46ba68 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c @@ -702,6 +702,7 @@ static struct clk_init_data pll_init = { .ops = &hdmi_8996_pll_ops, .parent_names = hdmi_pll_parents, .num_parents = ARRAY_SIZE(hdmi_pll_parents), + .flags = CLK_IGNORE_UNUSED, }; int msm_hdmi_pll_8996_init(struct platform_device *pdev) diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c index 92da69aa6187..99590758c68b 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c @@ -424,6 +424,7 @@ static struct clk_init_data pll_init = { .ops = &hdmi_pll_ops, .parent_names = hdmi_pll_parents, .num_parents = ARRAY_SIZE(hdmi_pll_parents), + .flags = CLK_IGNORE_UNUSED, }; int msm_hdmi_pll_8960_init(struct platform_device *pdev) -- cgit v1.2.3 From 31e4801aa2e59d4b42dc0fd42846a3aa7a6361af Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Thu, 13 Oct 2016 12:43:17 -0400 Subject: drm/msm/mdp5: handle non-fullscreen base plane case If the bottom-most layer is not fullscreen, we need to use the BASE mixer stage for solid fill (ie. MDP5_CTL_BLEND_OP_FLAG_BORDER_OUT). The blend_setup() code pretty much handled this already, we just had to figure this out in _atomic_check() and assign the stages appropriately. Also fix the case where there are zero enabled planes, where we also need to enable BORDER_OUT. Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c | 46 +++++++++++++++++++------------- 1 file changed, 28 insertions(+), 18 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c index fa2be7ce9468..c205c360e16d 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c @@ -223,12 +223,7 @@ static void blend_setup(struct drm_crtc *crtc) plane_cnt++; } - /* - * If there is no base layer, enable border color. - * Although it's not possbile in current blend logic, - * put it here as a reminder. - */ - if (!pstates[STAGE_BASE] && plane_cnt) { + if (!pstates[STAGE_BASE]) { ctl_blend_flags |= MDP5_CTL_BLEND_OP_FLAG_BORDER_OUT; DBG("Border Color is enabled"); } @@ -365,6 +360,15 @@ static int pstate_cmp(const void *a, const void *b) return pa->state->zpos - pb->state->zpos; } +/* is there a helper for this? */ +static bool is_fullscreen(struct drm_crtc_state *cstate, + struct drm_plane_state *pstate) +{ + return (pstate->crtc_x <= 0) && (pstate->crtc_y <= 0) && + ((pstate->crtc_x + pstate->crtc_w) >= cstate->mode.hdisplay) && + ((pstate->crtc_y + pstate->crtc_h) >= cstate->mode.vdisplay); +} + static int mdp5_crtc_atomic_check(struct drm_crtc *crtc, struct drm_crtc_state *state) { @@ -375,21 +379,11 @@ static int mdp5_crtc_atomic_check(struct drm_crtc *crtc, struct plane_state pstates[STAGE_MAX + 1]; const struct mdp5_cfg_hw *hw_cfg; const struct drm_plane_state *pstate; - int cnt = 0, i; + int cnt = 0, base = 0, i; DBG("%s: check", mdp5_crtc->name); - /* verify that there are not too many planes attached to crtc - * and that we don't have conflicting mixer stages: - */ - hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg); drm_atomic_crtc_state_for_each_plane_state(plane, pstate, state) { - if (cnt >= (hw_cfg->lm.nb_stages)) { - dev_err(dev->dev, "too many planes!\n"); - return -EINVAL; - } - - pstates[cnt].plane = plane; pstates[cnt].state = to_mdp5_plane_state(pstate); @@ -399,8 +393,24 @@ static int mdp5_crtc_atomic_check(struct drm_crtc *crtc, /* assign a stage based on sorted zpos property */ sort(pstates, cnt, sizeof(pstates[0]), pstate_cmp, NULL); + /* if the bottom-most layer is not fullscreen, we need to use + * it for solid-color: + */ + if ((cnt > 0) && !is_fullscreen(state, &pstates[0].state->base)) + base++; + + /* verify that there are not too many planes attached to crtc + * and that we don't have conflicting mixer stages: + */ + hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg); + + if ((cnt + base) >= hw_cfg->lm.nb_stages) { + dev_err(dev->dev, "too many planes!\n"); + return -EINVAL; + } + for (i = 0; i < cnt; i++) { - pstates[i].state->stage = STAGE_BASE + i; + pstates[i].state->stage = STAGE_BASE + i + base; DBG("%s: assign pipe %s on stage=%d", mdp5_crtc->name, pipe2name(mdp5_plane_pipe(pstates[i].plane)), pstates[i].state->stage); -- cgit v1.2.3 From 07cd2e36263af34f7f0b48e36eff5d4b77d5756a Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 17 Oct 2016 12:00:21 -0400 Subject: drm/msm/mdp5: no scaling support on RGBn pipes for 8x16 Looks like cut/paste error from the other device cfgs (which do support scaling on RGBn pipes). Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c | 2 +- drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 9 +++------ 2 files changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c index ac9e4cde1380..0e2bc5636c81 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c @@ -272,7 +272,7 @@ const struct mdp5_cfg_hw msm8x16_config = { .count = 2, .base = { 0x14000, 0x16000 }, .caps = MDP_PIPE_CAP_HFLIP | MDP_PIPE_CAP_VFLIP | - MDP_PIPE_CAP_SCALE | MDP_PIPE_CAP_DECIMATION, + MDP_PIPE_CAP_DECIMATION, }, .pipe_dma = { .count = 1, diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c index 951c002b05df..83bf997dda03 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c @@ -292,8 +292,7 @@ static int mdp5_plane_atomic_check(struct drm_plane *plane, format = to_mdp_format(msm_framebuffer_format(state->fb)); if (MDP_FORMAT_IS_YUV(format) && !pipe_supports_yuv(mdp5_plane->caps)) { - dev_err(plane->dev->dev, - "Pipe doesn't support YUV\n"); + DBG("Pipe doesn't support YUV\n"); return -EINVAL; } @@ -301,8 +300,7 @@ static int mdp5_plane_atomic_check(struct drm_plane *plane, if (!(mdp5_plane->caps & MDP_PIPE_CAP_SCALE) && (((state->src_w >> 16) != state->crtc_w) || ((state->src_h >> 16) != state->crtc_h))) { - dev_err(plane->dev->dev, - "Pipe doesn't support scaling (%dx%d -> %dx%d)\n", + DBG("Pipe doesn't support scaling (%dx%d -> %dx%d)\n", state->src_w >> 16, state->src_h >> 16, state->crtc_w, state->crtc_h); @@ -313,8 +311,7 @@ static int mdp5_plane_atomic_check(struct drm_plane *plane, vflip = !!(state->rotation & DRM_REFLECT_Y); if ((vflip && !(mdp5_plane->caps & MDP_PIPE_CAP_VFLIP)) || (hflip && !(mdp5_plane->caps & MDP_PIPE_CAP_HFLIP))) { - dev_err(plane->dev->dev, - "Pipe doesn't support flip\n"); + DBG("Pipe doesn't support flip\n"); return -EINVAL; } -- cgit v1.2.3 From 67cba0fbb484bbc1af42f2804662a80008ba61e9 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 24 Oct 2016 11:46:44 -0400 Subject: drm/msm/mdp5: 8x16 actually has 8 mixer stages Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c index 0e2bc5636c81..8b4e3004f451 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c @@ -282,7 +282,7 @@ const struct mdp5_cfg_hw msm8x16_config = { .lm = { .count = 2, /* LM0 and LM3 */ .base = { 0x44000, 0x47000 }, - .nb_stages = 5, + .nb_stages = 8, .max_width = 2048, .max_height = 0xFFFF, }, -- cgit v1.2.3 From 6c08d7ab23dd07c046e8de1520073053bdc76ae2 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sun, 30 Oct 2016 09:49:26 +0100 Subject: drm/sun4i: Fix error handling 'sun4i_layers_init()' returns an error pointer in case of error, not NULL. So test it with IS_ERR. Signed-off-by: Christophe JAILLET Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c index 0da9862ad8ed..077f3785439e 100644 --- a/drivers/gpu/drm/sun4i/sun4i_drv.c +++ b/drivers/gpu/drm/sun4i/sun4i_drv.c @@ -142,7 +142,7 @@ static int sun4i_drv_bind(struct device *dev) /* Create our layers */ drv->layers = sun4i_layers_init(drm); - if (!drv->layers) { + if (IS_ERR(drv->layers)) { dev_err(drm->dev, "Couldn't create the planes\n"); ret = -EINVAL; goto free_drm; -- cgit v1.2.3 From eed6f0eda0a009c282bcdd828c273e1239ae0cac Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Tue, 18 Oct 2016 15:32:30 -0200 Subject: virtio-gpu: fix vblank events virtio-gpu sends vblank events in virtio_gpu_crtc_atomic_flush, and because of that it must be called for disabled planes too. Ask drm_atomic_helper_commit_planes to do that. v2: update to use new drm_atomic_helper_commit_planes() API. Signed-off-by: Gerd Hoffmann Signed-off-by: Gustavo Padovan Signed-off-by: Dave Airlie --- drivers/gpu/drm/virtio/virtgpu_display.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/virtio/virtgpu_display.c b/drivers/gpu/drm/virtio/virtgpu_display.c index 7cf3678623c3..58048709c34e 100644 --- a/drivers/gpu/drm/virtio/virtgpu_display.c +++ b/drivers/gpu/drm/virtio/virtgpu_display.c @@ -338,8 +338,7 @@ static void vgdev_atomic_commit_tail(struct drm_atomic_state *state) drm_atomic_helper_commit_modeset_disables(dev, state); drm_atomic_helper_commit_modeset_enables(dev, state); - drm_atomic_helper_commit_planes(dev, state, - DRM_PLANE_COMMIT_ACTIVE_ONLY); + drm_atomic_helper_commit_planes(dev, state, 0); drm_atomic_helper_commit_hw_done(state); -- cgit v1.2.3 From 16976085a114ae293c6fa7a463d74600ffcfeb4b Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Thu, 3 Nov 2016 17:36:18 +0530 Subject: drm/msm: Fix error handling crashes seen when VRAM allocation fails If VRAM allocation fails, the error handling path crashes in msm_drm_uninit(). The following changes are made to fix this: msm_gem_shrinker_cleanup() is fixed to unregister the shrinker only if it was init-ed in the first place. Before calling kms->funcs->destroy(), we check if kms->funcs is also non-NULL. This is needed for MDP5, since during msm_drm_int(), priv->kms becomes non-NULL early, but msm_kms_init() is called on it only later in mdp5_kms_init(). Signed-off-by: Archit Taneja Signed-off-by: Rob Clark Reviewed-by: Andy Gross --- drivers/gpu/drm/msm/msm_drv.c | 2 +- drivers/gpu/drm/msm/msm_gem_shrinker.c | 7 +++++-- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index fb5c0b0a7594..46568fc80848 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -228,7 +228,7 @@ static int msm_drm_uninit(struct device *dev) flush_workqueue(priv->atomic_wq); destroy_workqueue(priv->atomic_wq); - if (kms) + if (kms && kms->funcs) kms->funcs->destroy(kms); if (gpu) { diff --git a/drivers/gpu/drm/msm/msm_gem_shrinker.c b/drivers/gpu/drm/msm/msm_gem_shrinker.c index 283d2841ba58..192b2d3a79cb 100644 --- a/drivers/gpu/drm/msm/msm_gem_shrinker.c +++ b/drivers/gpu/drm/msm/msm_gem_shrinker.c @@ -163,6 +163,9 @@ void msm_gem_shrinker_init(struct drm_device *dev) void msm_gem_shrinker_cleanup(struct drm_device *dev) { struct msm_drm_private *priv = dev->dev_private; - WARN_ON(unregister_vmap_purge_notifier(&priv->vmap_notifier)); - unregister_shrinker(&priv->shrinker); + + if (priv->shrinker.nr_deferred) { + WARN_ON(unregister_vmap_purge_notifier(&priv->vmap_notifier)); + unregister_shrinker(&priv->shrinker); + } } -- cgit v1.2.3 From 4db069a2bf990e278ea57ff615dcaa89b85376bd Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Fri, 4 Nov 2016 07:13:52 +0100 Subject: drm/sun4i: Propagate error to the caller If 'sun4i_layers_init()' returns an error, propagate it instead of returning -EINVAL unconditionally. Signed-off-by: Christophe JAILLET Reviewed-by: Gustavo Padovan Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c index 077f3785439e..70e9fd59c5a2 100644 --- a/drivers/gpu/drm/sun4i/sun4i_drv.c +++ b/drivers/gpu/drm/sun4i/sun4i_drv.c @@ -144,7 +144,7 @@ static int sun4i_drv_bind(struct device *dev) drv->layers = sun4i_layers_init(drm); if (IS_ERR(drv->layers)) { dev_err(drm->dev, "Couldn't create the planes\n"); - ret = -EINVAL; + ret = PTR_ERR(drv->layers); goto free_drm; } -- cgit v1.2.3 From 8d83bc22b259e5526625b6d298f637786c71129f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Tue, 11 Oct 2016 20:52:46 +0300 Subject: drm/i915: Respect alternate_ddc_pin for all DDI ports MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The VBT provides the platform a way to mix and match the DDI ports vs. GMBUS pins. Currently we only trust the VBT for DDI E, which I suppose has no standard GMBUS pin assignment. However, there are machines out there that use a non-standard mapping for the other ports as well. Let's start trusting the VBT on this one for all ports on DDI platforms. I've structured the code such that other platforms could easily start using this as well, by simply filling in the ddi_port_info. IIRC there may be CHV system that might actually need this. v2: Include a commit message, include a debug message during init Cc: stable@vger.kernel.org Cc: Maarten Maathuis Tested-by: Maarten Maathuis Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97877 Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jim Bride (cherry picked from commit e4ab73a13291fc844c9e24d5c347bd95818544d2) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_hdmi.c | 84 ++++++++++++++++++++++----------------- 1 file changed, 48 insertions(+), 36 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index f40a35f2913a..13c306173f27 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -1799,6 +1799,50 @@ intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *c intel_hdmi->aspect_ratio = HDMI_PICTURE_ASPECT_NONE; } +static u8 intel_hdmi_ddc_pin(struct drm_i915_private *dev_priv, + enum port port) +{ + const struct ddi_vbt_port_info *info = + &dev_priv->vbt.ddi_port_info[port]; + u8 ddc_pin; + + if (info->alternate_ddc_pin) { + DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (VBT)\n", + info->alternate_ddc_pin, port_name(port)); + return info->alternate_ddc_pin; + } + + switch (port) { + case PORT_B: + if (IS_BROXTON(dev_priv)) + ddc_pin = GMBUS_PIN_1_BXT; + else + ddc_pin = GMBUS_PIN_DPB; + break; + case PORT_C: + if (IS_BROXTON(dev_priv)) + ddc_pin = GMBUS_PIN_2_BXT; + else + ddc_pin = GMBUS_PIN_DPC; + break; + case PORT_D: + if (IS_CHERRYVIEW(dev_priv)) + ddc_pin = GMBUS_PIN_DPD_CHV; + else + ddc_pin = GMBUS_PIN_DPD; + break; + default: + MISSING_CASE(port); + ddc_pin = GMBUS_PIN_DPB; + break; + } + + DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (platform default)\n", + ddc_pin, port_name(port)); + + return ddc_pin; +} + void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, struct intel_connector *intel_connector) { @@ -1808,7 +1852,6 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, struct drm_device *dev = intel_encoder->base.dev; struct drm_i915_private *dev_priv = to_i915(dev); enum port port = intel_dig_port->port; - uint8_t alternate_ddc_pin; DRM_DEBUG_KMS("Adding HDMI connector on port %c\n", port_name(port)); @@ -1826,12 +1869,10 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, connector->doublescan_allowed = 0; connector->stereo_allowed = 1; + intel_hdmi->ddc_bus = intel_hdmi_ddc_pin(dev_priv, port); + switch (port) { case PORT_B: - if (IS_BROXTON(dev_priv)) - intel_hdmi->ddc_bus = GMBUS_PIN_1_BXT; - else - intel_hdmi->ddc_bus = GMBUS_PIN_DPB; /* * On BXT A0/A1, sw needs to activate DDIA HPD logic and * interrupts to check the external panel connection. @@ -1842,46 +1883,17 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, intel_encoder->hpd_pin = HPD_PORT_B; break; case PORT_C: - if (IS_BROXTON(dev_priv)) - intel_hdmi->ddc_bus = GMBUS_PIN_2_BXT; - else - intel_hdmi->ddc_bus = GMBUS_PIN_DPC; intel_encoder->hpd_pin = HPD_PORT_C; break; case PORT_D: - if (WARN_ON(IS_BROXTON(dev_priv))) - intel_hdmi->ddc_bus = GMBUS_PIN_DISABLED; - else if (IS_CHERRYVIEW(dev_priv)) - intel_hdmi->ddc_bus = GMBUS_PIN_DPD_CHV; - else - intel_hdmi->ddc_bus = GMBUS_PIN_DPD; intel_encoder->hpd_pin = HPD_PORT_D; break; case PORT_E: - /* On SKL PORT E doesn't have seperate GMBUS pin - * We rely on VBT to set a proper alternate GMBUS pin. */ - alternate_ddc_pin = - dev_priv->vbt.ddi_port_info[PORT_E].alternate_ddc_pin; - switch (alternate_ddc_pin) { - case DDC_PIN_B: - intel_hdmi->ddc_bus = GMBUS_PIN_DPB; - break; - case DDC_PIN_C: - intel_hdmi->ddc_bus = GMBUS_PIN_DPC; - break; - case DDC_PIN_D: - intel_hdmi->ddc_bus = GMBUS_PIN_DPD; - break; - default: - MISSING_CASE(alternate_ddc_pin); - } intel_encoder->hpd_pin = HPD_PORT_E; break; - case PORT_A: - intel_encoder->hpd_pin = HPD_PORT_A; - /* Internal port only for eDP. */ default: - BUG(); + MISSING_CASE(port); + return; } if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) { -- cgit v1.2.3 From cdffe3e252bb55e82ee89bbdfe8d2f18b6157c28 Mon Sep 17 00:00:00 2001 From: Lyude Date: Wed, 26 Oct 2016 12:36:09 -0400 Subject: drm/i915/vlv: Prevent enabling hpd polling in late suspend MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit One of the CI machines began to run into issues with the hpd poller suddenly waking up in the midst of the late suspend phase. It looks like this is getting caused by the fact we now deinitialize power wells in late suspend, which means that intel_hpd_poll_init() gets called in late suspend causing polling to get re-enabled. So, when deinitializing power wells on valleyview we now refrain from enabling polling in the midst of suspend. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98040 Fixes: 19625e85c6ec ("drm/i915: Enable polling when we don't have hpd") Signed-off-by: Lyude Cc: Ville Syrjälä Cc: Jani Saarinen Cc: Petry Latvala Reviewed-by: Ville Syrjälä Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1477499769-1966-1-git-send-email-lyude@redhat.com (cherry picked from commit b64b540931483cca3200d98756bed6ad0e01d75c) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_runtime_pm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c index 6c11168facd6..a38c2fefe85a 100644 --- a/drivers/gpu/drm/i915/intel_runtime_pm.c +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c @@ -1139,7 +1139,9 @@ static void vlv_display_power_well_deinit(struct drm_i915_private *dev_priv) intel_power_sequencer_reset(dev_priv); - intel_hpd_poll_init(dev_priv); + /* Prevent us from re-enabling polling on accident in late suspend */ + if (!dev_priv->drm.dev->power.is_suspended) + intel_hpd_poll_init(dev_priv); } static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv, -- cgit v1.2.3 From fbb21c5202ae7f1e71e832b1af59fb047da6383e Mon Sep 17 00:00:00 2001 From: Dhinakaran Pandiyan Date: Tue, 1 Nov 2016 11:47:59 -0700 Subject: drm/i915/dp: BDW cdclk fix for DP audio MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less than 432 MHz, enabling audio leads to pipe FIFO underruns and displays cycling on/off. From BSpec: "Display» BDW-SKL» dpr» [Register] DP_TP_CTL [BDW+,EXCLUDE(CHV)] Workaround : Do not use DisplayPort with CDCLK less than 432 MHz, audio enabled, port width x4, and link rate HBR2 (5.4 GHz), or else there may be audio corruption or screen corruption." Since, some DP configurations (e.g., MST) use port width x4 and HBR2 link rate, let's increase the cdclk to >= 432 MHz to enable audio for those cases. v4: Changed commit message v3: Combine BDW pixel rate adjustments into a function (Jani) v2: Restrict fix to BDW Retain the set cdclk across modesets (Ville) Cc: stable@vger.kernel.org Signed-off-by: Dhinakaran Pandiyan Reviewed-by: Ville Syrjälä Reviewed-by: Jani Nikula Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1478026080-2925-1-git-send-email-dhinakaran.pandiyan@intel.com (cherry picked from commit b30ce9e0552aa017ac6f2243f3c2d8e36fe52e69) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 0ad1879bfd9d..4f57f8c6074e 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10243,6 +10243,27 @@ static void bxt_modeset_commit_cdclk(struct drm_atomic_state *old_state) bxt_set_cdclk(to_i915(dev), req_cdclk); } +static int bdw_adjust_min_pipe_pixel_rate(struct intel_crtc_state *crtc_state, + int pixel_rate) +{ + /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ + if (crtc_state->ips_enabled) + pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95); + + /* BSpec says "Do not use DisplayPort with CDCLK less than + * 432 MHz, audio enabled, port width x4, and link rate + * HBR2 (5.4 GHz), or else there may be audio corruption or + * screen corruption." + */ + if (intel_crtc_has_dp_encoder(crtc_state) && + crtc_state->has_audio && + crtc_state->port_clock >= 540000 && + crtc_state->lane_count == 4) + pixel_rate = max(432000, pixel_rate); + + return pixel_rate; +} + /* compute the max rate for new configuration */ static int ilk_max_pixel_rate(struct drm_atomic_state *state) { @@ -10268,9 +10289,9 @@ static int ilk_max_pixel_rate(struct drm_atomic_state *state) pixel_rate = ilk_pipe_pixel_rate(crtc_state); - /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ - if (IS_BROADWELL(dev_priv) && crtc_state->ips_enabled) - pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95); + if (IS_BROADWELL(dev_priv)) + pixel_rate = bdw_adjust_min_pipe_pixel_rate(crtc_state, + pixel_rate); intel_state->min_pixclk[i] = pixel_rate; } -- cgit v1.2.3 From 61e0c5438866d0e737937fc35d752538960e1e9f Mon Sep 17 00:00:00 2001 From: Dhinakaran Pandiyan Date: Wed, 2 Nov 2016 13:13:21 -0700 Subject: drm/i915/dp: Extend BDW DP audio workaround to GEN9 platforms According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less than 432 MHz, enabling audio leads to pipe FIFO underruns and displays cycling on/off. Let's apply this work around to GEN9 platforms too, as it fixes the same issue. v2: Move drm_device to drm_i915_private conversion Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97907 Cc: stable@vger.kernel.org Cc: Libin Yang Signed-off-by: Dhinakaran Pandiyan Reviewed-by: Jani Nikula Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1478117601-19122-1-git-send-email-dhinakaran.pandiyan@intel.com (cherry picked from commit 9c7540241885838cfc7fa58c4a8bd75be0303ed1) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 4f57f8c6074e..81c11499bcf0 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10246,8 +10246,10 @@ static void bxt_modeset_commit_cdclk(struct drm_atomic_state *old_state) static int bdw_adjust_min_pipe_pixel_rate(struct intel_crtc_state *crtc_state, int pixel_rate) { + struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev); + /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ - if (crtc_state->ips_enabled) + if (IS_BROADWELL(dev_priv) && crtc_state->ips_enabled) pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95); /* BSpec says "Do not use DisplayPort with CDCLK less than @@ -10289,7 +10291,7 @@ static int ilk_max_pixel_rate(struct drm_atomic_state *state) pixel_rate = ilk_pipe_pixel_rate(crtc_state); - if (IS_BROADWELL(dev_priv)) + if (IS_BROADWELL(dev_priv) || IS_GEN9(dev_priv)) pixel_rate = bdw_adjust_min_pipe_pixel_rate(crtc_state, pixel_rate); -- cgit v1.2.3 From c4b8c570447a7bc171829532269878345b3ea9d0 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 7 Nov 2016 10:54:43 +0000 Subject: drm/i915: Round tile chunks up for constructing partial VMAs When we split a large object up into chunks for GTT faulting (because we can't fit the whole object into the aperture) we have to align our cuts with the fence registers. Each partial VMA must cover a complete set of tile rows or the offset into each partial VMA is not aligned with the whole image. Currently we enforce a minimum size on each partial VMA, but this minimum size itself was not aligned to the tile row causing distortion. Reported-by: Andreas Reis Reported-by: Chris Clayton Reported-by: Norbert Preining Tested-by: Norbert Preining Tested-by: Chris Clayton Fixes: 03af84fe7f48 ("drm/i915: Choose partial chunksize based on tile row size") Fixes: a61007a83a46 ("drm/i915: Fix partial GGTT faulting") # enabling patch Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98402 Testcase: igt/gem_mmap_gtt/medium-copy-odd Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: Jani Nikula Cc: # v4.9-rc1+ Link: http://patchwork.freedesktop.org/patch/msgid/20161107105443.27855-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen (cherry picked from commit 0ef723cbceb6dce8116e75d44c5b8679b2eba69a) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 23960de81b57..44b3f01faed3 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1806,7 +1806,7 @@ int i915_gem_fault(struct vm_area_struct *area, struct vm_fault *vmf) /* Use a partial view if it is bigger than available space */ chunk_size = MIN_CHUNK_PAGES; if (i915_gem_object_is_tiled(obj)) - chunk_size = max(chunk_size, tile_row_pages(obj)); + chunk_size = roundup(chunk_size, tile_row_pages(obj)); memset(&view, 0, sizeof(view)); view.type = I915_GGTT_VIEW_PARTIAL; -- cgit v1.2.3 From 54905ab5fe7aa453610e31cec640e528aaedb2e2 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 7 Nov 2016 11:01:28 +0000 Subject: drm/i915: Limit Valleyview and earlier to only using mappable scanout MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Valleyview appears to be limited to only scanning out from the first 512MiB of the Global GTT. Lets presume that this behaviour was inherited from the display block copied from g4x (not Ironlake) and all earlier generations are similarly affected, though testing suggests different symptoms. For simplicity, impose that these platforms must scanout from the mappable region. (For extra simplicity, use HAS_GMCH_DISPLAY even though this catches Cherryview which does not appear to be limited to the low aperture for its scanout.) v2: Use HAS_GMCH_DISPLAY() to more clearly convey my intent about limiting this workaround to the old style of display engine. v3: Update changelog to reflect testing by Ville Syrjälä v4: Include the changes to the comments as well Reported-by: Luis Botello Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98036 Fixes: 2efb813d5388 ("drm/i915: Fallback to using unmappable memory for scanout") Signed-off-by: Chris Wilson Cc: Akash Goel Cc: Joonas Lahtinen Cc: Ville Syrjälä Cc: # v4.9-rc1+ Link: http://patchwork.freedesktop.org/patch/msgid/20161107110128.28762-1-chris@chris-wilson.co.uk Reviewed-by: Ville Syrjälä (cherry picked from commit 767a222e47cc13239d38018887f911fec06169ea) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 44b3f01faed3..91ab7e9d6d2e 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3543,8 +3543,22 @@ i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, if (view->type == I915_GGTT_VIEW_NORMAL) vma = i915_gem_object_ggtt_pin(obj, view, 0, alignment, PIN_MAPPABLE | PIN_NONBLOCK); - if (IS_ERR(vma)) - vma = i915_gem_object_ggtt_pin(obj, view, 0, alignment, 0); + if (IS_ERR(vma)) { + struct drm_i915_private *i915 = to_i915(obj->base.dev); + unsigned int flags; + + /* Valleyview is definitely limited to scanning out the first + * 512MiB. Lets presume this behaviour was inherited from the + * g4x display engine and that all earlier gen are similarly + * limited. Testing suggests that it is a little more + * complicated than this. For example, Cherryview appears quite + * happy to scanout from anywhere within its global aperture. + */ + flags = 0; + if (HAS_GMCH_DISPLAY(i915)) + flags = PIN_MAPPABLE; + vma = i915_gem_object_ggtt_pin(obj, view, 0, alignment, flags); + } if (IS_ERR(vma)) goto err_unpin_display; -- cgit v1.2.3 From 757124d95c42bb579d67df51e51789849929ee31 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 3 Nov 2016 17:47:51 -0400 Subject: drm/amdgpu: fix crash in acp_hw_fini On CZ/ST systems with AZ rather than ACP audio, we need to bail early in hw_fini since there is nothing to do. bug: https://bugs.freedesktop.org/show_bug.cgi?id=98276 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c index 892d60fb225b..2057683f7b59 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c @@ -395,9 +395,12 @@ static int acp_hw_fini(void *handle) { int i, ret; struct device *dev; - struct amdgpu_device *adev = (struct amdgpu_device *)handle; + /* return early if no ACP */ + if (!adev->acp.acp_genpd) + return 0; + for (i = 0; i < ACP_DEVS ; i++) { dev = get_mfd_cell_dev(adev->acp.acp_cell[i].name, i); ret = pm_genpd_remove_device(&adev->acp.acp_genpd->gpd, dev); -- cgit v1.2.3 From a29d126027c781eaa305ecae432bb04d41e198c5 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 8 Nov 2016 14:52:18 +0100 Subject: drm/amdgpu/powerplay/smu7: fix unintialized data usage A recent bugfix replaced an out-of-bounds access with direct use of unintialized data: drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c: In function 'smu7_patch_limits_vddc': drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2033:6: error: 'vddc' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2146:11: note: 'vddc' was declared here drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2033:6: error: 'vddci' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2146:17: note: 'vddci' was declared here uint32_t vddc, vddci; This initializes the data as before using the correct type. Fixes: 77f7f71f5be1 ("drm/amdgpu/powerplay/smu7: fix static checker warning") Signed-off-by: Arnd Bergmann Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 75854021f403..51fb86f20c21 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -2133,9 +2133,11 @@ static int smu7_patch_limits_vddc(struct pp_hwmgr *hwmgr, struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend); if (tab) { + vddc = tab->vddc; smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, &vddc, &data->vddc_leakage); tab->vddc = vddc; + vddci = tab->vddci; smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, &vddci, &data->vddci_leakage); tab->vddci = vddci; -- cgit v1.2.3 From f20024d8ba6bc8abf8d0ec12eabfdedd9935fff2 Mon Sep 17 00:00:00 2001 From: Andrew Shadura Date: Thu, 3 Nov 2016 11:09:24 +0100 Subject: drm/amd/powerplay: return false instead of -EINVAL Returning -EINVAL from a bool-returning function phm_check_smc_update_required_for_display_configuration has an unexpected effect of returning true, which is probably not what was intended. Replace -EINVAL by false. The only place this function is called from is psm_adjust_power_state_dynamic in drivers/gpu/drm/amd/powerplay/eventmgr/psm.c:106: if (!equal || phm_check_smc_update_required_for_display_configuration(hwmgr)) { phm_apply_state_adjust_rules(hwmgr, requested, pcurrent); phm_set_power_state(hwmgr, &pcurrent->hardware, &requested->hardware); hwmgr->current_ps = requested; } It seems to expect a boolean value here. This issue has been found using the following Coccinelle semantic patch written by Peter Senna Tschudin: @@ identifier f; constant C; typedef bool; @@ bool f (...){ <+... * return -C; ...+> } Reviewed-by: Alex Deucher Signed-off-by: Andrew Shadura Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c index 14f8c1f4da3d..0723758ed065 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c @@ -272,7 +272,7 @@ bool phm_check_smc_update_required_for_display_configuration(struct pp_hwmgr *hw PHM_FUNC_CHECK(hwmgr); if (hwmgr->hwmgr_func->check_smc_update_required_for_display_configuration == NULL) - return -EINVAL; + return false; return hwmgr->hwmgr_func->check_smc_update_required_for_display_configuration(hwmgr); } -- cgit v1.2.3 From 34a515d27c6573b6f550877b30dd5e0f440c3d8f Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Mon, 4 Jan 2016 16:34:22 -0800 Subject: drm/fsl-dcu: do not update when modifying irq registers The IRQ status and mask registers are not "double buffered" according to the reference manual. Hence, there is no extra transfer/update write needed when modifying these registers. Signed-off-by: Stefan Agner --- drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c index e04efbed1a54..cc2fde2ae5ef 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c @@ -59,8 +59,6 @@ static int fsl_dcu_drm_irq_init(struct drm_device *dev) regmap_write(fsl_dev->regmap, DCU_INT_STATUS, 0); regmap_write(fsl_dev->regmap, DCU_INT_MASK, ~0); - regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE, - DCU_UPDATE_MODE_READREG); return ret; } @@ -139,8 +137,6 @@ static irqreturn_t fsl_dcu_drm_irq(int irq, void *arg) drm_handle_vblank(dev, 0); regmap_write(fsl_dev->regmap, DCU_INT_STATUS, int_status); - regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE, - DCU_UPDATE_MODE_READREG); return IRQ_HANDLED; } -- cgit v1.2.3 From 93daeeca2c9472a47d419884a64f6ca2b7f006e4 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Mon, 5 Sep 2016 19:05:12 -0700 Subject: drm/fsl-dcu: update all registers on flush Use the UPDATE_MODE READREG bit to initiate a register transfer on flush. This makes sure that we flush all registers only once for all planes. Signed-off-by: Stefan Agner --- drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 5 +++++ drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c | 5 ----- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c index b2d5e188b1b8..2ea9dbd9be30 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c @@ -25,8 +25,13 @@ static void fsl_dcu_drm_crtc_atomic_flush(struct drm_crtc *crtc, struct drm_crtc_state *old_crtc_state) { + struct drm_device *dev = crtc->dev; + struct fsl_dcu_drm_device *fsl_dev = dev->dev_private; struct drm_pending_vblank_event *event = crtc->state->event; + regmap_write(fsl_dev->regmap, + DCU_UPDATE_MODE, DCU_UPDATE_MODE_READREG); + if (event) { crtc->state->event = NULL; diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c index 9e6f7d8112b3..a99f48847420 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c @@ -160,11 +160,6 @@ static void fsl_dcu_drm_plane_atomic_update(struct drm_plane *plane, DCU_LAYER_POST_SKIP(0) | DCU_LAYER_PRE_SKIP(0)); } - regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE, - DCU_MODE_DCU_MODE_MASK, - DCU_MODE_DCU_MODE(DCU_MODE_NORMAL)); - regmap_write(fsl_dev->regmap, - DCU_UPDATE_MODE, DCU_UPDATE_MODE_READREG); return; } -- cgit v1.2.3 From 3d6f37102bd6e4b55a7f336d44974c0bd1c22a15 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Mon, 31 Oct 2016 09:51:19 -0700 Subject: drm/fsl-dcu: disable planes before disabling CRTC After disabling and reenabling the CRTC the DCU sometimes got stuck displaying the whole screen with a solid color. Disabling and reenabling the CRTC did not recover from the situation. This was often reproducable by just restarting the X-Server. The disabling sequence is not explicitly documented. But it turns out that disabling the planes before disabling the CRTC seems to prevent the above situation from happening. Use the callback ->atomic_disable instead of ->disable which allows to use the drm_atomic_helper_disable_planes_on_crtc() helper to disable planes before disabling the controller. Signed-off-by: Stefan Agner --- drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c index 2ea9dbd9be30..deb57435cc89 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c @@ -44,11 +44,15 @@ static void fsl_dcu_drm_crtc_atomic_flush(struct drm_crtc *crtc, } } -static void fsl_dcu_drm_disable_crtc(struct drm_crtc *crtc) +static void fsl_dcu_drm_crtc_atomic_disable(struct drm_crtc *crtc, + struct drm_crtc_state *old_crtc_state) { struct drm_device *dev = crtc->dev; struct fsl_dcu_drm_device *fsl_dev = dev->dev_private; + /* always disable planes on the CRTC */ + drm_atomic_helper_disable_planes_on_crtc(old_crtc_state, true); + drm_crtc_vblank_off(crtc); regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE, @@ -127,8 +131,8 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc) } static const struct drm_crtc_helper_funcs fsl_dcu_drm_crtc_helper_funcs = { + .atomic_disable = fsl_dcu_drm_crtc_atomic_disable, .atomic_flush = fsl_dcu_drm_crtc_atomic_flush, - .disable = fsl_dcu_drm_disable_crtc, .enable = fsl_dcu_drm_crtc_enable, .mode_set_nofb = fsl_dcu_drm_crtc_mode_set_nofb, }; -- cgit v1.2.3 From 5ced937b7d8dae2c6a536112abaad6352769a931 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Tue, 8 Nov 2016 17:04:10 +0100 Subject: drm/imx: disable planes before DC If the DC clock is disabled before the attached IDMACs are properly stopped the IDMACs may hang the IPU or even the whole system. Make sure the IDMACs are in safe state by disabling the planes before removal of the DC clock. Also set the atomic parameter to false to stop calling the atomic_begin hook, which does nothing useful as we immediately afterwards turn off vblank interrupts and possibly send the pending vblank event. Fixes: 33f14235302f (drm/imx: atomic phase 1: Use transitional atomic CRTC and plane helpers) Signed-off-by: Lucas Stach Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/ipuv3-crtc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/imx/ipuv3-crtc.c b/drivers/gpu/drm/imx/ipuv3-crtc.c index 4e1ae3fc462d..6be515a9fb69 100644 --- a/drivers/gpu/drm/imx/ipuv3-crtc.c +++ b/drivers/gpu/drm/imx/ipuv3-crtc.c @@ -68,6 +68,12 @@ static void ipu_crtc_atomic_disable(struct drm_crtc *crtc, ipu_dc_disable_channel(ipu_crtc->dc); ipu_di_disable(ipu_crtc->di); + /* + * Planes must be disabled before DC clock is removed, as otherwise the + * attached IDMACs will be left in undefined state, possibly hanging + * the IPU or even system. + */ + drm_atomic_helper_disable_planes_on_crtc(old_crtc_state, false); ipu_dc_disable(ipu); spin_lock_irq(&crtc->dev->event_lock); @@ -77,9 +83,6 @@ static void ipu_crtc_atomic_disable(struct drm_crtc *crtc, } spin_unlock_irq(&crtc->dev->event_lock); - /* always disable planes on the CRTC */ - drm_atomic_helper_disable_planes_on_crtc(old_crtc_state, true); - drm_crtc_vblank_off(crtc); } -- cgit v1.2.3 From 0a866d38ef3c13cf5834b78df21ee4c39bb5a689 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 9 Nov 2016 18:01:01 -0500 Subject: drm/amd/powerplay: propagate errors in phm_get_voltage_evv_on_sclk Missing for one case. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Rex Zhu Reviewed-by: Huang Rui Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c index 2ba7937d2545..520665e1ef12 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c @@ -711,7 +711,7 @@ int phm_get_voltage_evv_on_sclk(struct pp_hwmgr *hwmgr, uint8_t voltage_type, int ret = 0; if (hwmgr->chip_id < CHIP_POLARIS10) { - atomctrl_get_voltage_evv_on_sclk(hwmgr, voltage_type, sclk, id, voltage); + ret = atomctrl_get_voltage_evv_on_sclk(hwmgr, voltage_type, sclk, id, voltage); if (*voltage >= 2000 || *voltage == 0) *voltage = 1150; } else { -- cgit v1.2.3 From 90ebf11857c2743fab1b2b64140aff24e256e758 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 9 Nov 2016 18:04:54 -0500 Subject: drm/amd/powerplay: update phm_get_voltage_evv_on_sclk for iceland Was missing the handling for iceland. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Rex Zhu Reviewed-by: Huang Rui Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c index 520665e1ef12..e03dcb6ea9c1 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c @@ -710,7 +710,9 @@ int phm_get_voltage_evv_on_sclk(struct pp_hwmgr *hwmgr, uint8_t voltage_type, uint32_t vol; int ret = 0; - if (hwmgr->chip_id < CHIP_POLARIS10) { + if (hwmgr->chip_id < CHIP_TONGA) { + ret = atomctrl_get_voltage_evv(hwmgr, id, voltage); + } else if (hwmgr->chip_id < CHIP_POLARIS10) { ret = atomctrl_get_voltage_evv_on_sclk(hwmgr, voltage_type, sclk, id, voltage); if (*voltage >= 2000 || *voltage == 0) *voltage = 1150; -- cgit v1.2.3 From 0f12f73c5175d39445fa10cdca4481f80efdef49 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 9 Nov 2016 17:52:42 -0500 Subject: drm/amd/powerplay/smu7: fix checks in smu7_get_evv_voltages (v2) Only check if the tables exist in relevant configs. This fixes a failure on V0 tables. v2: fix version check as suggested by Rex bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Rex Zhu Reviewed-by: Huang Rui Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 51fb86f20c21..f41cddf2a16b 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -1460,19 +1460,19 @@ static int smu7_get_evv_voltages(struct pp_hwmgr *hwmgr) struct phm_ppt_v1_clock_voltage_dependency_table *sclk_table = NULL; - if (table_info == NULL) - return -EINVAL; - - sclk_table = table_info->vdd_dep_on_sclk; - for (i = 0; i < SMU7_MAX_LEAKAGE_COUNT; i++) { vv_id = ATOM_VIRTUAL_VOLTAGE_ID0 + i; if (data->vdd_gfx_control == SMU7_VOLTAGE_CONTROL_BY_SVID2) { - if (0 == phm_get_sclk_for_voltage_evv(hwmgr, + if ((hwmgr->pp_table_version == PP_TABLE_V1) + && !phm_get_sclk_for_voltage_evv(hwmgr, table_info->vddgfx_lookup_table, vv_id, &sclk)) { if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_ClockStretcher)) { + if (table_info == NULL) + return -EINVAL; + sclk_table = table_info->vdd_dep_on_sclk; + for (j = 1; j < sclk_table->count; j++) { if (sclk_table->entries[j].clk == sclk && sclk_table->entries[j].cks_enable == 0) { @@ -1498,12 +1498,15 @@ static int smu7_get_evv_voltages(struct pp_hwmgr *hwmgr) } } } else { - if ((hwmgr->pp_table_version == PP_TABLE_V0) || !phm_get_sclk_for_voltage_evv(hwmgr, table_info->vddc_lookup_table, vv_id, &sclk)) { if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_ClockStretcher)) { + if (table_info == NULL) + return -EINVAL; + sclk_table = table_info->vdd_dep_on_sclk; + for (j = 1; j < sclk_table->count; j++) { if (sclk_table->entries[j].clk == sclk && sclk_table->entries[j].cks_enable == 0) { -- cgit v1.2.3 From 954e6bee03fea509a85aea4cbf45307fe4e3b43e Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Thu, 10 Nov 2016 14:07:34 +0800 Subject: drm/amd/powerplay: implement get_clock_by_type for iceland. iceland use pptable v0. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Alex Deucher Signed-off-by: Rex Zhu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 51 +++++++++++++++--------- 1 file changed, 33 insertions(+), 18 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index f41cddf2a16b..b0c929dd8beb 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -4233,18 +4233,26 @@ static int smu7_get_sclks(struct pp_hwmgr *hwmgr, struct amd_pp_clocks *clocks) { struct phm_ppt_v1_information *table_info = (struct phm_ppt_v1_information *)hwmgr->pptable; - struct phm_ppt_v1_clock_voltage_dependency_table *dep_sclk_table; + struct phm_ppt_v1_clock_voltage_dependency_table *dep_sclk_table = NULL; + struct phm_clock_voltage_dependency_table *sclk_table; int i; - if (table_info == NULL) - return -EINVAL; - - dep_sclk_table = table_info->vdd_dep_on_sclk; - - for (i = 0; i < dep_sclk_table->count; i++) { - clocks->clock[i] = dep_sclk_table->entries[i].clk; - clocks->count++; + if (hwmgr->pp_table_version == PP_TABLE_V1) { + if (table_info == NULL || table_info->vdd_dep_on_sclk == NULL) + return -EINVAL; + dep_sclk_table = table_info->vdd_dep_on_sclk; + for (i = 0; i < dep_sclk_table->count; i++) { + clocks->clock[i] = dep_sclk_table->entries[i].clk; + clocks->count++; + } + } else if (hwmgr->pp_table_version == PP_TABLE_V0) { + sclk_table = hwmgr->dyn_state.vddc_dependency_on_sclk; + for (i = 0; i < sclk_table->count; i++) { + clocks->clock[i] = sclk_table->entries[i].clk; + clocks->count++; + } } + return 0; } @@ -4266,17 +4274,24 @@ static int smu7_get_mclks(struct pp_hwmgr *hwmgr, struct amd_pp_clocks *clocks) (struct phm_ppt_v1_information *)hwmgr->pptable; struct phm_ppt_v1_clock_voltage_dependency_table *dep_mclk_table; int i; + struct phm_clock_voltage_dependency_table *mclk_table; - if (table_info == NULL) - return -EINVAL; - - dep_mclk_table = table_info->vdd_dep_on_mclk; - - for (i = 0; i < dep_mclk_table->count; i++) { - clocks->clock[i] = dep_mclk_table->entries[i].clk; - clocks->latency[i] = smu7_get_mem_latency(hwmgr, + if (hwmgr->pp_table_version == PP_TABLE_V1) { + if (table_info == NULL) + return -EINVAL; + dep_mclk_table = table_info->vdd_dep_on_mclk; + for (i = 0; i < dep_mclk_table->count; i++) { + clocks->clock[i] = dep_mclk_table->entries[i].clk; + clocks->latency[i] = smu7_get_mem_latency(hwmgr, dep_mclk_table->entries[i].clk); - clocks->count++; + clocks->count++; + } + } else if (hwmgr->pp_table_version == PP_TABLE_V0) { + mclk_table = hwmgr->dyn_state.vddc_dependency_on_mclk; + for (i = 0; i < mclk_table->count; i++) { + clocks->clock[i] = mclk_table->entries[i].clk; + clocks->count++; + } } return 0; } -- cgit v1.2.3 From e5581fe2b4f40e54bfea9a1eee1bc487da52e98c Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 8 Nov 2016 16:38:00 +1000 Subject: drm/udl: make control msg static const. (v2) Thou shall not send control msg from the stack, does that mean I can send it from the RO memory area? and it looks like the answer is no, so here's v2 which kmemdups. Reported-by: poma Tested-by: poma Signed-off-by: Dave Airlie --- drivers/gpu/drm/udl/udl_main.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/udl/udl_main.c b/drivers/gpu/drm/udl/udl_main.c index 29f0207fa677..873f010d9616 100644 --- a/drivers/gpu/drm/udl/udl_main.c +++ b/drivers/gpu/drm/udl/udl_main.c @@ -98,17 +98,23 @@ success: static int udl_select_std_channel(struct udl_device *udl) { int ret; - u8 set_def_chn[] = {0x57, 0xCD, 0xDC, 0xA7, - 0x1C, 0x88, 0x5E, 0x15, - 0x60, 0xFE, 0xC6, 0x97, - 0x16, 0x3D, 0x47, 0xF2}; + static const u8 set_def_chn[] = {0x57, 0xCD, 0xDC, 0xA7, + 0x1C, 0x88, 0x5E, 0x15, + 0x60, 0xFE, 0xC6, 0x97, + 0x16, 0x3D, 0x47, 0xF2}; + void *sendbuf; + + sendbuf = kmemdup(set_def_chn, sizeof(set_def_chn), GFP_KERNEL); + if (!sendbuf) + return -ENOMEM; ret = usb_control_msg(udl->udev, usb_sndctrlpipe(udl->udev, 0), NR_USB_REQUEST_CHANNEL, (USB_DIR_OUT | USB_TYPE_VENDOR), 0, 0, - set_def_chn, sizeof(set_def_chn), + sendbuf, sizeof(set_def_chn), USB_CTRL_SET_TIMEOUT); + kfree(sendbuf); return ret < 0 ? ret : 0; } -- cgit v1.2.3 From 7bc61cc5df808008b77a3b72cf814960c675518b Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Wed, 19 Oct 2016 10:46:18 +0300 Subject: drm/arcpgu: Accommodate adv7511 switch to DRM bridge ARC PGU driver starts crashing on initialization after 'commit e12c2f645557 ("drm/i2c: adv7511: Convert to drm_bridge")' This happenes because in "arcpgu_drm_hdmi_init" function we get pointer of "drm_i2c_encoder_driver" structure, which doesn't exist after adv7511 hdmi encoder interface changed from slave encoder to drm bridge. So, when we call "encoder_init" function from this structure driver crashes. Bootlog: ------------------------------------->8-------------------------------- [drm] Initialized drm 1.1.0 20060810 arcpgu e0017000.pgu: arc_pgu ID: 0xabbabaab arcpgu e0017000.pgu: assigned reserved memory node frame_buffer@9e000000 Path: (null) CPU: 0 PID: 1 Comm: swapper Not tainted 4.8.0-00001-gb5642252fa01-dirty #8 task: 9a058000 task.stack: 9a032000 [ECR ]: 0x00220100 => Invalid Read @ 0x00000004 by insn @ 0x803934e8 [EFA ]: 0x00000004 [BLINK ]: drm_atomic_helper_connector_dpms+0xa6/0x230 [ERET ]: drm_atomic_helper_connector_dpms+0xa4/0x230 [STAT32]: 0x00000846 : K DE E2 E1 BTA: 0x8016d949 SP: 0x9a033e34 FP: 0x00000000 LPS: 0x8036f6fc LPE: 0x8036f700 LPC: 0x00000000 r00: 0x8063c118 r01: 0x805b98ac r02: 0x00000b11 r03: 0x00000000 r04: 0x9a010f54 r05: 0x00000000 r06: 0x00000001 r07: 0x00000000 r08: 0x00000028 r09: 0x00000001 r10: 0x00000007 r11: 0x00000054 r12: 0x720a3033 Stack Trace: drm_atomic_helper_connector_dpms+0xa4/0x230 arcpgu_drm_hdmi_init+0xbc/0x228 arcpgu_probe+0x168/0x244 platform_drv_probe+0x26/0x64 really_probe+0x1f0/0x32c __driver_attach+0xa8/0xd0 bus_for_each_dev+0x3c/0x74 bus_add_driver+0xc2/0x184 driver_register+0x50/0xec do_one_initcall+0x3a/0x120 kernel_init_freeable+0x108/0x1a0 ------------------------------------->8-------------------------------- Fix ARC PGU driver to be able work with drm bridge hdmi encoder interface. The hdmi connector code isn't needed anymore as we expect the adv7511 bridge driver to create/manage the connector. Signed-off-by: Eugeniy Paltsev Reviewed-by: Archit Taneja Signed-off-by: Alexey Brodkin --- drivers/gpu/drm/arc/arcpgu_hdmi.c | 159 ++++---------------------------------- 1 file changed, 17 insertions(+), 142 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/arc/arcpgu_hdmi.c b/drivers/gpu/drm/arc/arcpgu_hdmi.c index b7a8b2ac4055..b69c66b4897e 100644 --- a/drivers/gpu/drm/arc/arcpgu_hdmi.c +++ b/drivers/gpu/drm/arc/arcpgu_hdmi.c @@ -14,170 +14,45 @@ * */ -#include +#include #include -#include #include "arcpgu.h" -struct arcpgu_drm_connector { - struct drm_connector connector; - struct drm_encoder_slave *encoder_slave; -}; - -static int arcpgu_drm_connector_get_modes(struct drm_connector *connector) -{ - const struct drm_encoder_slave_funcs *sfuncs; - struct drm_encoder_slave *slave; - struct arcpgu_drm_connector *con = - container_of(connector, struct arcpgu_drm_connector, connector); - - slave = con->encoder_slave; - if (slave == NULL) { - dev_err(connector->dev->dev, - "connector_get_modes: cannot find slave encoder for connector\n"); - return 0; - } - - sfuncs = slave->slave_funcs; - if (sfuncs->get_modes == NULL) - return 0; - - return sfuncs->get_modes(&slave->base, connector); -} - -static enum drm_connector_status -arcpgu_drm_connector_detect(struct drm_connector *connector, bool force) -{ - enum drm_connector_status status = connector_status_unknown; - const struct drm_encoder_slave_funcs *sfuncs; - struct drm_encoder_slave *slave; - - struct arcpgu_drm_connector *con = - container_of(connector, struct arcpgu_drm_connector, connector); - - slave = con->encoder_slave; - if (slave == NULL) { - dev_err(connector->dev->dev, - "connector_detect: cannot find slave encoder for connector\n"); - return status; - } - - sfuncs = slave->slave_funcs; - if (sfuncs && sfuncs->detect) - return sfuncs->detect(&slave->base, connector); - - dev_err(connector->dev->dev, "connector_detect: could not detect slave funcs\n"); - return status; -} - -static void arcpgu_drm_connector_destroy(struct drm_connector *connector) -{ - drm_connector_unregister(connector); - drm_connector_cleanup(connector); -} - -static const struct drm_connector_helper_funcs -arcpgu_drm_connector_helper_funcs = { - .get_modes = arcpgu_drm_connector_get_modes, -}; - -static const struct drm_connector_funcs arcpgu_drm_connector_funcs = { - .dpms = drm_helper_connector_dpms, - .reset = drm_atomic_helper_connector_reset, - .detect = arcpgu_drm_connector_detect, - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = arcpgu_drm_connector_destroy, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -}; - -static struct drm_encoder_helper_funcs arcpgu_drm_encoder_helper_funcs = { - .dpms = drm_i2c_encoder_dpms, - .mode_fixup = drm_i2c_encoder_mode_fixup, - .mode_set = drm_i2c_encoder_mode_set, - .prepare = drm_i2c_encoder_prepare, - .commit = drm_i2c_encoder_commit, - .detect = drm_i2c_encoder_detect, -}; - static struct drm_encoder_funcs arcpgu_drm_encoder_funcs = { .destroy = drm_encoder_cleanup, }; int arcpgu_drm_hdmi_init(struct drm_device *drm, struct device_node *np) { - struct arcpgu_drm_connector *arcpgu_connector; - struct drm_i2c_encoder_driver *driver; - struct drm_encoder_slave *encoder; - struct drm_connector *connector; - struct i2c_client *i2c_slave; - int ret; + struct drm_encoder *encoder; + struct drm_bridge *bridge; + + int ret = 0; encoder = devm_kzalloc(drm->dev, sizeof(*encoder), GFP_KERNEL); if (encoder == NULL) return -ENOMEM; - i2c_slave = of_find_i2c_device_by_node(np); - if (!i2c_slave || !i2c_get_clientdata(i2c_slave)) { - dev_err(drm->dev, "failed to find i2c slave encoder\n"); - return -EPROBE_DEFER; - } - - if (i2c_slave->dev.driver == NULL) { - dev_err(drm->dev, "failed to find i2c slave driver\n"); + /* Locate drm bridge from the hdmi encoder DT node */ + bridge = of_drm_find_bridge(np); + if (!bridge) return -EPROBE_DEFER; - } - driver = - to_drm_i2c_encoder_driver(to_i2c_driver(i2c_slave->dev.driver)); - ret = driver->encoder_init(i2c_slave, drm, encoder); - if (ret) { - dev_err(drm->dev, "failed to initialize i2c encoder slave\n"); - return ret; - } - - encoder->base.possible_crtcs = 1; - encoder->base.possible_clones = 0; - ret = drm_encoder_init(drm, &encoder->base, &arcpgu_drm_encoder_funcs, + encoder->possible_crtcs = 1; + encoder->possible_clones = 0; + ret = drm_encoder_init(drm, encoder, &arcpgu_drm_encoder_funcs, DRM_MODE_ENCODER_TMDS, NULL); if (ret) return ret; - drm_encoder_helper_add(&encoder->base, - &arcpgu_drm_encoder_helper_funcs); - - arcpgu_connector = devm_kzalloc(drm->dev, sizeof(*arcpgu_connector), - GFP_KERNEL); - if (!arcpgu_connector) { - ret = -ENOMEM; - goto error_encoder_cleanup; - } - - connector = &arcpgu_connector->connector; - drm_connector_helper_add(connector, &arcpgu_drm_connector_helper_funcs); - ret = drm_connector_init(drm, connector, &arcpgu_drm_connector_funcs, - DRM_MODE_CONNECTOR_HDMIA); - if (ret < 0) { - dev_err(drm->dev, "failed to initialize drm connector\n"); - goto error_encoder_cleanup; - } + /* Link drm_bridge to encoder */ + bridge->encoder = encoder; + encoder->bridge = bridge; - ret = drm_mode_connector_attach_encoder(connector, &encoder->base); - if (ret < 0) { - dev_err(drm->dev, "could not attach connector to encoder\n"); - drm_connector_unregister(connector); - goto error_connector_cleanup; - } - - arcpgu_connector->encoder_slave = encoder; - - return 0; - -error_connector_cleanup: - drm_connector_cleanup(connector); + ret = drm_bridge_attach(drm, bridge); + if (ret) + drm_encoder_cleanup(encoder); -error_encoder_cleanup: - drm_encoder_cleanup(&encoder->base); return ret; } -- cgit v1.2.3 From 48004881f6935704e5e4ffaf9e0ec921a25db243 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 7 Nov 2016 16:52:04 +0000 Subject: drm/i915: Mark CPU cache as dirty when used for rendering MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On LLC, or even snooped, machines rendering via the GPU ends up in the CPU cache. This cacheline dirt also needs to be flushed to main memory when moving to an incoherent domain, such as the display's scanout engine. Mostly, this happens because either the object is marked as dirty from its first use or is avoided by setting the object into the display domain from the start. v2: Treat WT as not requiring a clflush prior to use on the display engine as well. Fixes: 0f71979ab7fb ("drm/i915: Performed deferred clflush inside set-cache-level") References: https://bugs.freedesktop.org/show_bug.cgi?id=95414 Signed-off-by: Chris Wilson Cc: Jani Nikula Cc: Ville Syrjälä Cc: # v4.0+ Reviewed-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/20161107165204.7008-1-chris@chris-wilson.co.uk (cherry picked from commit 7aa6ca61ee5546d74b76610894924cdb0d4a1af0) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 7adb4c77cc7f..a218c2e395e7 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -1281,6 +1281,12 @@ i915_gem_validate_context(struct drm_device *dev, struct drm_file *file, return ctx; } +static bool gpu_write_needs_clflush(struct drm_i915_gem_object *obj) +{ + return !(obj->cache_level == I915_CACHE_NONE || + obj->cache_level == I915_CACHE_WT); +} + void i915_vma_move_to_active(struct i915_vma *vma, struct drm_i915_gem_request *req, unsigned int flags) @@ -1311,6 +1317,8 @@ void i915_vma_move_to_active(struct i915_vma *vma, /* update for the implicit flush after a batch */ obj->base.write_domain &= ~I915_GEM_GPU_DOMAINS; + if (!obj->cache_dirty && gpu_write_needs_clflush(obj)) + obj->cache_dirty = true; } if (flags & EXEC_OBJECT_NEEDS_FENCE) -- cgit v1.2.3 From 9f1a7ab260300c670608a9db861187069f8b179a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 7 Nov 2016 22:20:55 +0200 Subject: drm/i915: Grab the rotation from the passed plane state for VLV sprites MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use the passed in plane_state instead of plane->state in vlv_update_plane(). Currently the two are one and the same, but if we start queuing up multiple plane updates they might not be. Looks like this was rebase fail on my part. Cc: Daniel Vetter Fixes: 8d0deca8c6e0 ("drm/i915: Pass 90/270 vs. 0/180 rotation info for intel_gen4_compute_page_offset()") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-4-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson (cherry picked from commit 11df4d95b3ad9e6a6a6e0907bb200610a4d24887) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_sprite.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index 73a521fdf1bd..dbed12c484c9 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -358,7 +358,7 @@ vlv_update_plane(struct drm_plane *dplane, int plane = intel_plane->plane; u32 sprctl; u32 sprsurf_offset, linear_offset; - unsigned int rotation = dplane->state->rotation; + unsigned int rotation = plane_state->base.rotation; const struct drm_intel_sprite_colorkey *key = &plane_state->ckey; int crtc_x = plane_state->base.dst.x1; int crtc_y = plane_state->base.dst.y1; -- cgit v1.2.3 From fc22b787890f9f9067fd130feec42297a4ee62ba Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 21 Oct 2016 16:44:38 +0300 Subject: drm/i915: Refresh that status of MST capable connectors in ->detect() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Once we've determined that the sink is MST capable we never end up running through the full detect cycle again, despite getting HPDs. Fix tht by ripping out the incorrect piece of code responsible. This got broken when I moved the long HPD handling to the ->detect() hook, but failed to remove the leftover code. Cc: Ander Conselvan de Oliveira Cc: drm-intel-fixes@lists.freedesktop.org Cc: Rui Tiago Matos Tested-by: Rui Tiago Matos Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98323 Cc: Kirill A. Shutemov Tested-by: Kirill A. Shutemov References: https://bugs.freedesktop.org/show_bug.cgi?id=98306 Fixes: 1015811609c0 ("drm/i915: Move long hpd handling into the hotplug work") Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1477057478-29328-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson (cherry picked from commit 1aab956c7b8872fb6976328316bfad62c6e67cf8) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 3581b5a7f716..bf344d08356a 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -4463,21 +4463,11 @@ static enum drm_connector_status intel_dp_detect(struct drm_connector *connector, bool force) { struct intel_dp *intel_dp = intel_attached_dp(connector); - struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); - struct intel_encoder *intel_encoder = &intel_dig_port->base; enum drm_connector_status status = connector->status; DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id, connector->name); - if (intel_dp->is_mst) { - /* MST devices are disconnected from a monitor POV */ - intel_dp_unset_edid(intel_dp); - if (intel_encoder->type != INTEL_OUTPUT_EDP) - intel_encoder->type = INTEL_OUTPUT_DP; - return connector_status_disconnected; - } - /* If full detect is not performed yet, do a full detect */ if (!intel_dp->detect_done) status = intel_dp_long_pulse(intel_dp->attached_connector); -- cgit v1.2.3 From 8e94a46c1770884166b31adc99eba7da65a446a7 Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Wed, 9 Nov 2016 02:25:15 +0100 Subject: drm/amdgpu: Attach exclusive fence to prime exported bo's. (v5) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit External clients which import our bo's wait only for exclusive dmabuf-fences, not on shared ones, ditto for bo's which we import from external providers and write to. Therefore attach exclusive fences on prime shared buffers if our exported buffer gets imported by an external client, or if we import a buffer from an external exporter. See discussion in thread: https://lists.freedesktop.org/archives/dri-devel/2016-October/122370.html Prime export tested on Intel iGPU + AMD Tonga dGPU as DRI3/Present Prime render offload, and with the Tonga standalone as primary gpu. v2: Add a wait for all shared fences before prime export, as suggested by Christian Koenig. v3: - Mark buffer prime_exported in amdgpu_gem_prime_pin, so we only use the exclusive fence when exporting a bo to external clients like a separate iGPU, but not when exporting/importing from/to ourselves as part of regular DRI3 fd passing. - Propagate failure of reservation_object_wait_rcu back to caller. v4: - Switch to a prime_shared_count counter instead of a flag, which gets in/decremented on prime_pin/unpin, so we can switch back to shared fences if all clients detach from our exported bo. - Also switch to exclusive fence for prime imported bo's. v5: - Drop lret, instead use int ret -> long ret, as proposed by Christian. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95472 Tested-by: Mike Lothian (v1) Signed-off-by: Mario Kleiner Reviewed-by: Christian König . Cc: Christian König Cc: Michel Dänzer Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 1 + drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c | 2 +- drivers/gpu/drm/amd/amdgpu/amdgpu_prime.c | 20 +++++++++++++++++++- 3 files changed, 21 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index 039b57e4644c..496f72b134eb 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -459,6 +459,7 @@ struct amdgpu_bo { u64 metadata_flags; void *metadata; u32 metadata_size; + unsigned prime_shared_count; /* list of all virtual address to which this bo * is associated to */ diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c index 651115dcce12..c02db01f6583 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c @@ -132,7 +132,7 @@ static int amdgpu_bo_list_set(struct amdgpu_device *adev, entry->priority = min(info[i].bo_priority, AMDGPU_BO_LIST_MAX_PRIORITY); entry->tv.bo = &entry->robj->tbo; - entry->tv.shared = true; + entry->tv.shared = !entry->robj->prime_shared_count; if (entry->robj->prefered_domains == AMDGPU_GEM_DOMAIN_GDS) gds_obj = entry->robj; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_prime.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_prime.c index 7700dc22f243..3826d5aea0a6 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_prime.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_prime.c @@ -74,20 +74,36 @@ amdgpu_gem_prime_import_sg_table(struct drm_device *dev, if (ret) return ERR_PTR(ret); + bo->prime_shared_count = 1; return &bo->gem_base; } int amdgpu_gem_prime_pin(struct drm_gem_object *obj) { struct amdgpu_bo *bo = gem_to_amdgpu_bo(obj); - int ret = 0; + long ret = 0; ret = amdgpu_bo_reserve(bo, false); if (unlikely(ret != 0)) return ret; + /* + * Wait for all shared fences to complete before we switch to future + * use of exclusive fence on this prime shared bo. + */ + ret = reservation_object_wait_timeout_rcu(bo->tbo.resv, true, false, + MAX_SCHEDULE_TIMEOUT); + if (unlikely(ret < 0)) { + DRM_DEBUG_PRIME("Fence wait failed: %li\n", ret); + amdgpu_bo_unreserve(bo); + return ret; + } + /* pin buffer into GTT */ ret = amdgpu_bo_pin(bo, AMDGPU_GEM_DOMAIN_GTT, NULL); + if (likely(ret == 0)) + bo->prime_shared_count++; + amdgpu_bo_unreserve(bo); return ret; } @@ -102,6 +118,8 @@ void amdgpu_gem_prime_unpin(struct drm_gem_object *obj) return; amdgpu_bo_unpin(bo); + if (bo->prime_shared_count) + bo->prime_shared_count--; amdgpu_bo_unreserve(bo); } -- cgit v1.2.3 From cb434658a8ff151c221a9ac1d44fb6788100cd0d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 15 Nov 2016 11:39:08 -0500 Subject: drm/amdgpu/powerplay: drop a redundant NULL check Left over from an earlier rev of the patch. Acked-by: Colin Ian King Cc: Dan Carpenter Cc: Colin King Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index b0c929dd8beb..13f2b705ea49 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -1469,8 +1469,6 @@ static int smu7_get_evv_voltages(struct pp_hwmgr *hwmgr) table_info->vddgfx_lookup_table, vv_id, &sclk)) { if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_ClockStretcher)) { - if (table_info == NULL) - return -EINVAL; sclk_table = table_info->vdd_dep_on_sclk; for (j = 1; j < sclk_table->count; j++) { -- cgit v1.2.3 From 1da2c326e43b0834105993d13610647337bbad67 Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Fri, 11 Nov 2016 11:24:29 +0800 Subject: drm/amdgpu:fix vpost_needed routine 1,cleanup description/comments 2,for FIJI & passthrough, force post when smc fw version below 22.15 3,for other cases, follow regular rules Signed-off-by: Monk Liu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 27 +++++++-------------------- 1 file changed, 7 insertions(+), 20 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 7ca07e7b25c1..3161d77bf299 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -658,12 +658,10 @@ static bool amdgpu_vpost_needed(struct amdgpu_device *adev) return false; if (amdgpu_passthrough(adev)) { - /* for FIJI: In whole GPU pass-through virtualization case - * old smc fw won't clear some registers (e.g. MEM_SIZE, BIOS_SCRATCH) - * so amdgpu_card_posted return false and driver will incorrectly skip vPost. - * but if we force vPost do in pass-through case, the driver reload will hang. - * whether doing vPost depends on amdgpu_card_posted if smc version is above - * 00160e00 for FIJI. + /* for FIJI: In whole GPU pass-through virtualization case, after VM reboot + * some old smc fw still need driver do vPost otherwise gpu hang, while + * those smc fw version above 22.15 doesn't have this flaw, so we force + * vpost executed for smc version below 22.15 */ if (adev->asic_type == CHIP_FIJI) { int err; @@ -674,22 +672,11 @@ static bool amdgpu_vpost_needed(struct amdgpu_device *adev) return true; fw_ver = *((uint32_t *)adev->pm.fw->data + 69); - if (fw_ver >= 0x00160e00) - return !amdgpu_card_posted(adev); + if (fw_ver < 0x00160e00) + return true; } - } else { - /* in bare-metal case, amdgpu_card_posted return false - * after system reboot/boot, and return true if driver - * reloaded. - * we shouldn't do vPost after driver reload otherwise GPU - * could hang. - */ - if (amdgpu_card_posted(adev)) - return false; } - - /* we assume vPost is neede for all other cases */ - return true; + return !amdgpu_card_posted(adev); } /** -- cgit v1.2.3 From bc9db5ad3253c8e17969bd802c47b73e63f125ab Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 11 Nov 2016 19:14:24 +0200 Subject: drm/i915: Assume non-DP++ port if dvo_port is HDMI and there's no AUX ch specified in the VBT MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit My heuristic for detecting type 1 DVI DP++ adaptors based on the VBT port information apparently didn't survive the reality of buggy VBTs. In this particular case we have a machine with a natice HDMI port, but the VBT tells us it's a DP++ port based on its capabilities. The dvo_port information in VBT does claim that we're dealing with a HDMI port though, but we have other machines which do the same even when they actually have DP++ ports. So that piece of information alone isn't sufficient to tell the two apart. After staring at a bunch of VBTs from various machines, I have to conclude that the only other semi-reliable clue we can use is the presence of the AUX channel in the VBT. On this particular machine AUX channel is specified as zero, whereas on some of the other machines which listed the DP++ port as HDMI have a non-zero AUX channel. I've also seen VBTs which have dvo_port a DP but have a zero AUX channel. I believe those we need to treat as DP ports, so we'll limit the AUX channel check to just the cases where dvo_port is HDMI. If we encounter any more serious failures with this heuristic I think we'll have to have to throw it out entirely. But that could mean that there is a risk of type 1 DVI dongle users getting greeted by a black screen, so I'd rather not go there unless absolutely necessary. v2: Remove the duplicate PORT_A check (Daniel) Fix some typos in the commit message Cc: Daniel Otero Cc: stable@vger.kernel.org Tested-by: Daniel Otero Fixes: d61992565bd3 ("drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97994 Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1478884464-14251-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter (cherry picked from commit 7a17995a3dc8613f778a9e2fd20e870f17789544) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_bios.c | 30 ++++++++++++++++++++++-------- drivers/gpu/drm/i915/intel_vbt_defs.h | 3 ++- 2 files changed, 24 insertions(+), 9 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 1f8af87c6294..cf2560708e03 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -1143,7 +1143,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port, if (!child) return; - aux_channel = child->raw[25]; + aux_channel = child->common.aux_channel; ddc_pin = child->common.ddc_pin; is_dvi = child->common.device_type & DEVICE_TYPE_TMDS_DVI_SIGNALING; @@ -1673,7 +1673,8 @@ bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port) return false; } -bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum port port) +static bool child_dev_is_dp_dual_mode(const union child_device_config *p_child, + enum port port) { static const struct { u16 dp, hdmi; @@ -1687,22 +1688,35 @@ bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum por [PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, }, [PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, }, }; - int i; if (port == PORT_A || port >= ARRAY_SIZE(port_mapping)) return false; - if (!dev_priv->vbt.child_dev_num) + if ((p_child->common.device_type & DEVICE_TYPE_DP_DUAL_MODE_BITS) != + (DEVICE_TYPE_DP_DUAL_MODE & DEVICE_TYPE_DP_DUAL_MODE_BITS)) return false; + if (p_child->common.dvo_port == port_mapping[port].dp) + return true; + + /* Only accept a HDMI dvo_port as DP++ if it has an AUX channel */ + if (p_child->common.dvo_port == port_mapping[port].hdmi && + p_child->common.aux_channel != 0) + return true; + + return false; +} + +bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, + enum port port) +{ + int i; + for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { const union child_device_config *p_child = &dev_priv->vbt.child_dev[i]; - if ((p_child->common.dvo_port == port_mapping[port].dp || - p_child->common.dvo_port == port_mapping[port].hdmi) && - (p_child->common.device_type & DEVICE_TYPE_DP_DUAL_MODE_BITS) == - (DEVICE_TYPE_DP_DUAL_MODE & DEVICE_TYPE_DP_DUAL_MODE_BITS)) + if (child_dev_is_dp_dual_mode(p_child, port)) return true; } diff --git a/drivers/gpu/drm/i915/intel_vbt_defs.h b/drivers/gpu/drm/i915/intel_vbt_defs.h index 68db9621f1f0..8886cab19f98 100644 --- a/drivers/gpu/drm/i915/intel_vbt_defs.h +++ b/drivers/gpu/drm/i915/intel_vbt_defs.h @@ -280,7 +280,8 @@ struct common_child_dev_config { u8 dp_support:1; u8 tmds_support:1; u8 support_reserved:5; - u8 not_common3[12]; + u8 aux_channel; + u8 not_common3[11]; u8 iboost_level; } __packed; -- cgit v1.2.3 From da7800a88c5a3b798f763d6f9f343e9a49860c4f Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Mon, 14 Nov 2016 16:36:08 +0800 Subject: drm/amd/powerplay: avoid out of bounds access on array ps. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit check array index first and then visit the array. Signed-off-by: Rex Zhu Reviewed-by: Christian König Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 13f2b705ea49..08cd0bd3ebe5 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -2984,19 +2984,19 @@ static int smu7_get_pp_table_entry_callback_func_v0(struct pp_hwmgr *hwmgr, if (!(data->mc_micro_code_feature & DISABLE_MC_LOADMICROCODE) && memory_clock > data->highest_mclk) data->highest_mclk = memory_clock; - performance_level = &(ps->performance_levels - [ps->performance_level_count++]); - PP_ASSERT_WITH_CODE( (ps->performance_level_count < smum_get_mac_definition(hwmgr->smumgr, SMU_MAX_LEVELS_GRAPHICS)), "Performance levels exceeds SMC limit!", return -EINVAL); PP_ASSERT_WITH_CODE( - (ps->performance_level_count <= + (ps->performance_level_count < hwmgr->platform_descriptor.hardwareActivityPerformanceLevels), - "Performance levels exceeds Driver limit!", - return -EINVAL); + "Performance levels exceeds Driver limit, Skip!", + return 0); + + performance_level = &(ps->performance_levels + [ps->performance_level_count++]); /* Performance levels are arranged from low to high. */ performance_level->memory_clock = memory_clock; -- cgit v1.2.3 From e9f01049d1ea4679a3258b8423fe54bae424ee0e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 18 Nov 2016 10:26:39 +1000 Subject: Revert "drm/mediatek: fix a typo of OD_CFG to OD_RELAYMODE" This reverts commit 83ba62bc700bab710b22be3a1bf6cf973f754273. Signed-off-by: Dave Airlie --- drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c index aa5f20fabd10..df33b3ca6ffd 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c @@ -123,7 +123,7 @@ static void mtk_od_config(struct mtk_ddp_comp *comp, unsigned int w, unsigned int bpc) { writel(w << 16 | h, comp->regs + DISP_OD_SIZE); - writel(OD_RELAYMODE, comp->regs + OD_CFG); + writel(OD_RELAYMODE, comp->regs + OD_RELAYMODE); mtk_dither_set(comp, bpc, DISP_OD_CFG); } -- cgit v1.2.3 From 7d40c2cf080950eab63a0747482027f5f1dae0d3 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 18 Nov 2016 10:27:00 +1000 Subject: Revert "drm/mediatek: set vblank_disable_allowed to true" This reverts commit f752fff611b99f5679224f3990a1f531ea64b1ec. Signed-off-by: Dave Airlie --- drivers/gpu/drm/mediatek/mtk_drm_drv.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c index 0b2ae47eb52c..cf83f6507ec8 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c @@ -217,7 +217,6 @@ static int mtk_drm_kms_init(struct drm_device *drm) if (ret < 0) goto err_component_unbind; - drm->vblank_disable_allowed = true; drm_kms_helper_poll_init(drm); drm_mode_config_reset(drm); -- cgit v1.2.3 From 7a79279e7186c4ac8b753cbd335ecc4ba81b5970 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 22 Nov 2016 13:56:54 +0000 Subject: drm/arm: hdlcd: fix plane base address update While testing HDMI with Xorg on the Juno board, I find that when Xorg starts up or shuts down, the display is shifted significantly to the right and wrapped in the active region. (No sync bars are visible.) The timings are correct, it behaves as if the start address has been shifted many pixels _into_ the framebuffer. This occurs whenever the display mode size is changed - using xrandr in Xorg shows that changing the resolution triggers the problem almost every time, but changing the refresh rate does not. Using devmem2 to disable and re-enable the HDLCD resolves the issue, and repeated disable/enable cycles do not make the issue re-appear. Further debugging shows that we try to update the controller configuration while enabled. Alwys ensure that the HDLCD is disabled prior to updating the controller timings, and use drm_crtc_vblank_off()/drm_crtc_vblank_on() so that DRM knows whether it can expect vblank interrupts. Signed-off-by: Russell King Signed-off-by: Liviu Dudau --- drivers/gpu/drm/arm/hdlcd_crtc.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/arm/hdlcd_crtc.c b/drivers/gpu/drm/arm/hdlcd_crtc.c index 48019ae22ddb..28341b32067f 100644 --- a/drivers/gpu/drm/arm/hdlcd_crtc.c +++ b/drivers/gpu/drm/arm/hdlcd_crtc.c @@ -150,15 +150,14 @@ static void hdlcd_crtc_enable(struct drm_crtc *crtc) clk_prepare_enable(hdlcd->clk); hdlcd_crtc_mode_set_nofb(crtc); hdlcd_write(hdlcd, HDLCD_REG_COMMAND, 1); + drm_crtc_vblank_on(crtc); } static void hdlcd_crtc_disable(struct drm_crtc *crtc) { struct hdlcd_drm_private *hdlcd = crtc_to_hdlcd_priv(crtc); - if (!crtc->state->active) - return; - + drm_crtc_vblank_off(crtc); hdlcd_write(hdlcd, HDLCD_REG_COMMAND, 0); clk_disable_unprepare(hdlcd->clk); } -- cgit v1.2.3 From 1db4496f167bcc7c6541d449355ade2e7d339d52 Mon Sep 17 00:00:00 2001 From: Peter Wu Date: Wed, 23 Nov 2016 02:22:24 +0100 Subject: drm/amdgpu: fix power state when port pm is unavailable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When PCIe port PM is not enabled (system BIOS is pre-2015 or the pcie_port_pm=off parameter is set), legacy ATPX PM should still be marked as supported. Otherwise the GPU can fail to power on after runtime suspend. This affected a Dell Inspiron 5548. Ideally the BIOS date in the PCI core is lowered to 2013 (the first year where hybrid graphics platforms using power resources was introduced), but that seems more risky at this point and would not solve the pcie_port_pm=off issue. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98505 Reported-and-tested-by: Nayan Deshmukh Signed-off-by: Peter Wu Signed-off-by: Alex Deucher Cc: # 4.8+ Acked-by: Christian König Reviewed-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c index dae35a96a694..02ca5dd978f6 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c @@ -34,6 +34,7 @@ struct amdgpu_atpx { static struct amdgpu_atpx_priv { bool atpx_detected; + bool bridge_pm_usable; /* handle for device - and atpx */ acpi_handle dhandle; acpi_handle other_handle; @@ -205,7 +206,11 @@ static int amdgpu_atpx_validate(struct amdgpu_atpx *atpx) atpx->is_hybrid = false; if (valid_bits & ATPX_MS_HYBRID_GFX_SUPPORTED) { printk("ATPX Hybrid Graphics\n"); - atpx->functions.power_cntl = false; + /* + * Disable legacy PM methods only when pcie port PM is usable, + * otherwise the device might fail to power off or power on. + */ + atpx->functions.power_cntl = !amdgpu_atpx_priv.bridge_pm_usable; atpx->is_hybrid = true; } @@ -480,6 +485,7 @@ static int amdgpu_atpx_power_state(enum vga_switcheroo_client_id id, */ static bool amdgpu_atpx_pci_probe_handle(struct pci_dev *pdev) { + struct pci_dev *parent_pdev = pci_upstream_bridge(pdev); acpi_handle dhandle, atpx_handle; acpi_status status; @@ -494,6 +500,7 @@ static bool amdgpu_atpx_pci_probe_handle(struct pci_dev *pdev) } amdgpu_atpx_priv.dhandle = dhandle; amdgpu_atpx_priv.atpx.handle = atpx_handle; + amdgpu_atpx_priv.bridge_pm_usable = parent_pdev && parent_pdev->bridge_d3; return true; } -- cgit v1.2.3 From d3ac31f3b4bf9fade93d69770cb9c34912e017be Mon Sep 17 00:00:00 2001 From: Peter Wu Date: Wed, 23 Nov 2016 02:22:25 +0100 Subject: drm/radeon: fix power state when port pm is unavailable (v2) When PCIe port PM is not enabled (system BIOS is pre-2015 or the pcie_port_pm=off parameter is set), legacy ATPX PM should still be marked as supported. Otherwise the GPU can fail to power on after runtime suspend. This affected a Dell Inspiron 5548. Ideally the BIOS date in the PCI core is lowered to 2013 (the first year where hybrid graphics platforms using power resources was introduced), but that seems more risky at this point and would not solve the pcie_port_pm=off issue. v2: agd: fix typo Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98505 Signed-off-by: Peter Wu Signed-off-by: Alex Deucher Cc: # 4.8+ Reviewed-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_atpx_handler.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c index 2fdcd04bc93f..4129b12521a6 100644 --- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c +++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c @@ -34,6 +34,7 @@ struct radeon_atpx { static struct radeon_atpx_priv { bool atpx_detected; + bool bridge_pm_usable; /* handle for device - and atpx */ acpi_handle dhandle; struct radeon_atpx atpx; @@ -203,7 +204,11 @@ static int radeon_atpx_validate(struct radeon_atpx *atpx) atpx->is_hybrid = false; if (valid_bits & ATPX_MS_HYBRID_GFX_SUPPORTED) { printk("ATPX Hybrid Graphics\n"); - atpx->functions.power_cntl = false; + /* + * Disable legacy PM methods only when pcie port PM is usable, + * otherwise the device might fail to power off or power on. + */ + atpx->functions.power_cntl = !radeon_atpx_priv.bridge_pm_usable; atpx->is_hybrid = true; } @@ -474,6 +479,7 @@ static int radeon_atpx_power_state(enum vga_switcheroo_client_id id, */ static bool radeon_atpx_pci_probe_handle(struct pci_dev *pdev) { + struct pci_dev *parent_pdev = pci_upstream_bridge(pdev); acpi_handle dhandle, atpx_handle; acpi_status status; @@ -487,6 +493,7 @@ static bool radeon_atpx_pci_probe_handle(struct pci_dev *pdev) radeon_atpx_priv.dhandle = dhandle; radeon_atpx_priv.atpx.handle = atpx_handle; + radeon_atpx_priv.bridge_pm_usable = parent_pdev && parent_pdev->bridge_d3; return true; } -- cgit v1.2.3 From 1ee6f347f81925fa8f3816e69ca1b49021f37850 Mon Sep 17 00:00:00 2001 From: Bibby Hsieh Date: Tue, 18 Oct 2016 16:23:59 +0800 Subject: drm/mediatek: fix a typo of DISP_OD_CFG to OD_RELAYMODE If we want to set the hardware OD to relay mode, we have to set DISP_OD_CFG register rather than OD_RELAYMODE; otherwise, the system will access the wrong address. Change-Id: Ifb9bb4caa63df906437d48b5d5326b6d04ea332a Fixes: 7216436420414144646f5d8343d061355fd23483 ("drm/mediatek: set mt8173 dithering function") Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Bibby Hsieh Acked-by: CK Hu --- drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c index df33b3ca6ffd..48cc01fd20c7 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c @@ -123,7 +123,7 @@ static void mtk_od_config(struct mtk_ddp_comp *comp, unsigned int w, unsigned int bpc) { writel(w << 16 | h, comp->regs + DISP_OD_SIZE); - writel(OD_RELAYMODE, comp->regs + OD_RELAYMODE); + writel(OD_RELAYMODE, comp->regs + DISP_OD_CFG); mtk_dither_set(comp, bpc, DISP_OD_CFG); } -- cgit v1.2.3 From f6c872397028837c80685ee96c4011c62abe9a73 Mon Sep 17 00:00:00 2001 From: Jitao Shi Date: Wed, 16 Nov 2016 11:20:54 +0800 Subject: drm/mediatek: fixed the calc method of data rate per lane Tune dsi frame rate by pixel clock, dsi add some extra signal (i.e. Tlpx, Ths-prepare, Ths-zero, Ths-trail,Ths-exit) when enter and exit LP mode, those signals will cause h-time larger than normal and reduce FPS. So need to multiply a coefficient to offset the extra signal's effect. coefficient = ((htotal*bpp/lane_number)+Tlpx+Ths_prep+Ths_zero+ Ths_trail+Ths_exit)/(htotal*bpp/lane_number) Signed-off-by: Jitao Shi Reviewed-by: Daniel Kurtz --- drivers/gpu/drm/mediatek/mtk_dsi.c | 64 ++++++++++++++++++++++++++++---------- 1 file changed, 48 insertions(+), 16 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c index 28b2044ed9f2..eaa5a2240c0c 100644 --- a/drivers/gpu/drm/mediatek/mtk_dsi.c +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c @@ -86,7 +86,7 @@ #define DSI_PHY_TIMECON0 0x110 #define LPX (0xff << 0) -#define HS_PRPR (0xff << 8) +#define HS_PREP (0xff << 8) #define HS_ZERO (0xff << 16) #define HS_TRAIL (0xff << 24) @@ -102,10 +102,16 @@ #define CLK_TRAIL (0xff << 24) #define DSI_PHY_TIMECON3 0x11c -#define CLK_HS_PRPR (0xff << 0) +#define CLK_HS_PREP (0xff << 0) #define CLK_HS_POST (0xff << 8) #define CLK_HS_EXIT (0xff << 16) +#define T_LPX 5 +#define T_HS_PREP 6 +#define T_HS_TRAIL 8 +#define T_HS_EXIT 7 +#define T_HS_ZERO 10 + #define NS_TO_CYCLE(n, c) ((n) / (c) + (((n) % (c)) ? 1 : 0)) struct phy; @@ -161,20 +167,18 @@ static void mtk_dsi_mask(struct mtk_dsi *dsi, u32 offset, u32 mask, u32 data) static void dsi_phy_timconfig(struct mtk_dsi *dsi) { u32 timcon0, timcon1, timcon2, timcon3; - unsigned int ui, cycle_time; - unsigned int lpx; + u32 ui, cycle_time; ui = 1000 / dsi->data_rate + 0x01; cycle_time = 8000 / dsi->data_rate + 0x01; - lpx = 5; - timcon0 = (8 << 24) | (0xa << 16) | (0x6 << 8) | lpx; - timcon1 = (7 << 24) | (5 * lpx << 16) | ((3 * lpx) / 2) << 8 | - (4 * lpx); + timcon0 = T_LPX | T_HS_PREP << 8 | T_HS_ZERO << 16 | T_HS_TRAIL << 24; + timcon1 = 4 * T_LPX | (3 * T_LPX / 2) << 8 | 5 * T_LPX << 16 | + T_HS_EXIT << 24; timcon2 = ((NS_TO_CYCLE(0x64, cycle_time) + 0xa) << 24) | (NS_TO_CYCLE(0x150, cycle_time) << 16); - timcon3 = (2 * lpx) << 16 | NS_TO_CYCLE(80 + 52 * ui, cycle_time) << 8 | - NS_TO_CYCLE(0x40, cycle_time); + timcon3 = NS_TO_CYCLE(0x40, cycle_time) | (2 * T_LPX) << 16 | + NS_TO_CYCLE(80 + 52 * ui, cycle_time) << 8; writel(timcon0, dsi->regs + DSI_PHY_TIMECON0); writel(timcon1, dsi->regs + DSI_PHY_TIMECON1); @@ -202,19 +206,47 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi) { struct device *dev = dsi->dev; int ret; + u64 pixel_clock, total_bits; + u32 htotal, htotal_bits, bit_per_pixel, overhead_cycles, overhead_bits; if (++dsi->refcount != 1) return 0; + switch (dsi->format) { + case MIPI_DSI_FMT_RGB565: + bit_per_pixel = 16; + break; + case MIPI_DSI_FMT_RGB666_PACKED: + bit_per_pixel = 18; + break; + case MIPI_DSI_FMT_RGB666: + case MIPI_DSI_FMT_RGB888: + default: + bit_per_pixel = 24; + break; + } + /** - * data_rate = (pixel_clock / 1000) * pixel_dipth * mipi_ratio; - * pixel_clock unit is Khz, data_rata unit is MHz, so need divide 1000. - * mipi_ratio is mipi clk coefficient for balance the pixel clk in mipi. - * we set mipi_ratio is 1.05. + * vm.pixelclock is in kHz, pixel_clock unit is Hz, so multiply by 1000 + * htotal_time = htotal * byte_per_pixel / num_lanes + * overhead_time = lpx + hs_prepare + hs_zero + hs_trail + hs_exit + * mipi_ratio = (htotal_time + overhead_time) / htotal_time + * data_rate = pixel_clock * bit_per_pixel * mipi_ratio / num_lanes; */ - dsi->data_rate = dsi->vm.pixelclock * 3 * 21 / (1 * 1000 * 10); + pixel_clock = dsi->vm.pixelclock * 1000; + htotal = dsi->vm.hactive + dsi->vm.hback_porch + dsi->vm.hfront_porch + + dsi->vm.hsync_len; + htotal_bits = htotal * bit_per_pixel; + + overhead_cycles = T_LPX + T_HS_PREP + T_HS_ZERO + T_HS_TRAIL + + T_HS_EXIT; + overhead_bits = overhead_cycles * dsi->lanes * 8; + total_bits = htotal_bits + overhead_bits; + + dsi->data_rate = DIV_ROUND_UP_ULL(pixel_clock * total_bits, + htotal * dsi->lanes); - ret = clk_set_rate(dsi->hs_clk, dsi->data_rate * 1000000); + ret = clk_set_rate(dsi->hs_clk, dsi->data_rate); if (ret < 0) { dev_err(dev, "Failed to set data rate: %d\n", ret); goto err_refcount; -- cgit v1.2.3 From 5ad45307d990020b25a8f7486178b6e033790f70 Mon Sep 17 00:00:00 2001 From: Matthias Brugger Date: Fri, 18 Nov 2016 11:06:10 +0100 Subject: drm/mediatek: fix null pointer dereference The probe function requests the interrupt before initializing the ddp component. Which leads to a null pointer dereference at boot. Fix this by requesting the interrput after all components got initialized properly. Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Matthias Brugger Change-Id: I57193a7ab554dfb37c35a455900689333adf511c --- drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c index f75c5b5a536c..c70310206ac5 100644 --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c @@ -251,13 +251,6 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev) if (irq < 0) return irq; - ret = devm_request_irq(dev, irq, mtk_disp_ovl_irq_handler, - IRQF_TRIGGER_NONE, dev_name(dev), priv); - if (ret < 0) { - dev_err(dev, "Failed to request irq %d: %d\n", irq, ret); - return ret; - } - comp_id = mtk_ddp_comp_get_id(dev->of_node, MTK_DISP_OVL); if (comp_id < 0) { dev_err(dev, "Failed to identify by alias: %d\n", comp_id); @@ -273,6 +266,13 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev) platform_set_drvdata(pdev, priv); + ret = devm_request_irq(dev, irq, mtk_disp_ovl_irq_handler, + IRQF_TRIGGER_NONE, dev_name(dev), priv); + if (ret < 0) { + dev_err(dev, "Failed to request irq %d: %d\n", irq, ret); + return ret; + } + ret = component_add(dev, &mtk_disp_ovl_component_ops); if (ret) dev_err(dev, "Failed to add component: %d\n", ret); -- cgit v1.2.3 From d74200024009c8d974c7484446c9eb1622408a17 Mon Sep 17 00:00:00 2001 From: Arvind Yadav Date: Wed, 19 Oct 2016 15:34:16 +0530 Subject: gpu/drm/exynos/exynos_hdmi - Unmap region obtained by of_iomap Free memory mapping, if hdmi_probe is not successful. Signed-off-by: Arvind Yadav Signed-off-by: Inki Dae Signed-off-by: Dave Airlie --- drivers/gpu/drm/exynos/exynos_hdmi.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index e8fb6ef947ee..38eaa63afb31 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1907,6 +1907,8 @@ err_disable_pm_runtime: err_hdmiphy: if (hdata->hdmiphy_port) put_device(&hdata->hdmiphy_port->dev); + if (hdata->regs_hdmiphy) + iounmap(hdata->regs_hdmiphy); err_ddc: put_device(&hdata->ddc_adpt->dev); @@ -1929,6 +1931,9 @@ static int hdmi_remove(struct platform_device *pdev) if (hdata->hdmiphy_port) put_device(&hdata->hdmiphy_port->dev); + if (hdata->regs_hdmiphy) + iounmap(hdata->regs_hdmiphy); + put_device(&hdata->ddc_adpt->dev); return 0; -- cgit v1.2.3 From 747e5a5ff2a2ae84715c33d6679ac3c5220a3aec Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Thu, 24 Nov 2016 14:40:50 +0000 Subject: drm: hdlcd: Fix cleanup order If hdlcd_drm_bind() fails at drm_fbdev_cma_init(), its cleanup will call drm_mode_config_cleanup() as if to balance drm_mode_config_reset(). The net result is that drm_connector_cleanup() will clean up the active connectors long before component_unbind_all() gets called, so when the connector later tries to clean up itself after being unbound, Bad Things can happen: [ 4.121888] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 4.129951] pgd = ffffff80091e0000 [ 4.133345] [00000000] *pgd=00000009ffffe003, *pud=00000009ffffe003, *pmd=0000000000000000 [ 4.141613] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 4.147144] Modules linked in: [ 4.150188] CPU: 0 PID: 122 Comm: kworker/u12:2 Not tainted 4.8.0-rc2+ #989 [ 4.157097] Hardware name: ARM Juno development board (r1) (DT) [ 4.162981] Workqueue: deferwq deferred_probe_work_func [ 4.168173] task: ffffffc975d93200 task.stack: ffffffc975dac000 [ 4.174055] PC is at drm_connector_cleanup+0x58/0x1c0 [ 4.179074] LR is at tda998x_unbind+0x24/0x40 [ 4.183401] pc : [] lr : [] pstate: 00000045 [ 4.190750] sp : ffffffc975dafa10 [ 4.194041] x29: ffffffc975dafa10 x28: ffffffc9768152a8 [ 4.199325] x27: ffffffc97ff46450 x26: ffffff8008d99000 [ 4.204608] x25: dead000000000100 x24: dead000000000200 [ 4.209891] x23: ffffffc976bf91e8 x22: 0000000000000000 [ 4.215172] x21: ffffffc976bf9170 x20: ffffffc976bf9170 [ 4.220454] x19: ffffffc976bf9018 x18: 0000000000000000 [ 4.225737] x17: 0000000074ce71ee x16: 000000008ff5d35f [ 4.231019] x15: ffffffc97681e91c x14: ffffffffffffffff [ 4.236301] x13: ffffffc97681e185 x12: 0000000000000038 [ 4.241583] x11: 0101010101010101 x10: 0000000000000000 [ 4.246866] x9 : 0000000040000000 x8 : 0000000000210d00 [ 4.252148] x7 : ffffffc97fea8c00 x6 : 000000000000001b [ 4.257430] x5 : ffffff80084b7b8c x4 : 0000000000000080 [ 4.262712] x3 : ffffff8008504128 x2 : ffffffc975df3800 [ 4.267993] x1 : 0000000000000000 x0 : 0000000000000000 ... [ 4.750937] [] drm_connector_cleanup+0x58/0x1c0 [ 4.756990] [] tda998x_unbind+0x24/0x40 [ 4.762354] [] component_unbind.isra.4+0x28/0x50 [ 4.768492] [] component_unbind_all+0xcc/0xd8 [ 4.774373] [] hdlcd_drm_bind+0x234/0x418 [ 4.779909] [] try_to_bring_up_master+0x140/0x1a0 [ 4.786133] [] component_add+0x98/0x170 [ 4.791496] [] tda998x_probe+0x18/0x20 [ 4.796774] [] i2c_device_probe+0x164/0x258 [ 4.802481] [] driver_probe_device+0x204/0x2b0 [ 4.808447] [] __device_attach_driver+0x9c/0xf8 [ 4.814498] [] bus_for_each_drv+0x58/0x98 [ 4.820033] [] __device_attach+0xc4/0x138 [ 4.825567] [] device_initial_probe+0x10/0x18 [ 4.831446] [] bus_probe_device+0x94/0xa0 [ 4.836981] [] deferred_probe_work_func+0x78/0xb0 [ 4.843207] [] process_one_work+0x118/0x378 [ 4.848914] [] worker_thread+0x48/0x498 [ 4.854276] [] kthread+0xd0/0xe8 [ 4.859036] [] ret_from_fork+0x10/0x40 [ 4.864314] Code: f2fbd5b9 f2fbd5b8 f8478ee0 eb17001f (f9400013) [ 4.870472] ---[ end trace a643cfe4ce1d838b ]--- Fix this by moving the drm_mode_config_cleanup() much later such that it correctly balances drm_mode_config_init(). Suggested-by: Russell King Signed-off-by: Robin Murphy Signed-off-by: Liviu Dudau --- drivers/gpu/drm/arm/hdlcd_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/arm/hdlcd_drv.c b/drivers/gpu/drm/arm/hdlcd_drv.c index fb6a418ce6be..e138fb51e8ce 100644 --- a/drivers/gpu/drm/arm/hdlcd_drv.c +++ b/drivers/gpu/drm/arm/hdlcd_drv.c @@ -375,7 +375,6 @@ static int hdlcd_drm_bind(struct device *dev) err_fbdev: drm_kms_helper_poll_fini(drm); - drm_mode_config_cleanup(drm); drm_vblank_cleanup(drm); err_vblank: pm_runtime_disable(drm->dev); @@ -387,6 +386,7 @@ err_unload: drm_irq_uninstall(drm); of_reserved_mem_device_release(drm->dev); err_free: + drm_mode_config_cleanup(drm); dev_set_drvdata(dev, NULL); drm_dev_unref(drm); -- cgit v1.2.3 From b64268d8a3f623c9b88676ad3dfacc95cfcfc62f Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Thu, 24 Nov 2016 13:33:47 +0800 Subject: drm/amd/powerplay: initialize the soft_regs offset in struct smu7_hwmgr This could lead to mclk dpm problems on some boards. Signed-off-by: Rex Zhu Ack-by: Tom St Denis Reviewed-by: Huang Rui Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smc.c b/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smc.c index 4ccc0b72324d..71bb2f8dc157 100644 --- a/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smc.c +++ b/drivers/gpu/drm/amd/powerplay/smumgr/polaris10_smc.c @@ -2214,6 +2214,7 @@ uint32_t polaris10_get_mac_definition(uint32_t value) int polaris10_process_firmware_header(struct pp_hwmgr *hwmgr) { struct polaris10_smumgr *smu_data = (struct polaris10_smumgr *)(hwmgr->smumgr->backend); + struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend); uint32_t tmp; int result; bool error = false; @@ -2233,8 +2234,10 @@ int polaris10_process_firmware_header(struct pp_hwmgr *hwmgr) offsetof(SMU74_Firmware_Header, SoftRegisters), &tmp, SMC_RAM_END); - if (!result) + if (!result) { + data->soft_regs_start = tmp; smu_data->smu7_data.soft_regs_start = tmp; + } error |= (0 != result); -- cgit v1.2.3 From 7ac33e47d5769632010e537964c7e45498f8dc26 Mon Sep 17 00:00:00 2001 From: Peter Wu Date: Sat, 26 Nov 2016 15:05:01 +0100 Subject: drm/amdgpu: fix check for port PM availability The ATPX method does not always exist on the dGPU, it may be located at the iGPU. The parent device of the iGPU is the root port for which bridge_d3 is false. This accidentally enables the legacy PM method which conflicts with port PM and prevented the dGPU from powering on. Fixes: 1db4496f167b ("drm/amdgpu: fix power state when port pm is unavailable") Reported-and-tested-by: Mike Lothian Signed-off-by: Peter Wu Signed-off-by: Alex Deucher Cc: # 4.8+ --- drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c index 02ca5dd978f6..6c343a933182 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c @@ -485,7 +485,6 @@ static int amdgpu_atpx_power_state(enum vga_switcheroo_client_id id, */ static bool amdgpu_atpx_pci_probe_handle(struct pci_dev *pdev) { - struct pci_dev *parent_pdev = pci_upstream_bridge(pdev); acpi_handle dhandle, atpx_handle; acpi_status status; @@ -500,7 +499,6 @@ static bool amdgpu_atpx_pci_probe_handle(struct pci_dev *pdev) } amdgpu_atpx_priv.dhandle = dhandle; amdgpu_atpx_priv.atpx.handle = atpx_handle; - amdgpu_atpx_priv.bridge_pm_usable = parent_pdev && parent_pdev->bridge_d3; return true; } @@ -562,17 +560,25 @@ static bool amdgpu_atpx_detect(void) struct pci_dev *pdev = NULL; bool has_atpx = false; int vga_count = 0; + bool d3_supported = false; + struct pci_dev *parent_pdev; while ((pdev = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, pdev)) != NULL) { vga_count++; has_atpx |= (amdgpu_atpx_pci_probe_handle(pdev) == true); + + parent_pdev = pci_upstream_bridge(pdev); + d3_supported |= parent_pdev && parent_pdev->bridge_d3; } while ((pdev = pci_get_class(PCI_CLASS_DISPLAY_OTHER << 8, pdev)) != NULL) { vga_count++; has_atpx |= (amdgpu_atpx_pci_probe_handle(pdev) == true); + + parent_pdev = pci_upstream_bridge(pdev); + d3_supported |= parent_pdev && parent_pdev->bridge_d3; } if (has_atpx && vga_count == 2) { @@ -580,6 +586,7 @@ static bool amdgpu_atpx_detect(void) printk(KERN_INFO "vga_switcheroo: detected switching method %s handle\n", acpi_method_name); amdgpu_atpx_priv.atpx_detected = true; + amdgpu_atpx_priv.bridge_pm_usable = d3_supported; amdgpu_atpx_init(); return true; } -- cgit v1.2.3 From bcfdd5d5105087e6f33dfeb08a1ca6b2c0287b61 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 28 Nov 2016 17:23:40 -0500 Subject: drm/radeon: fix check for port PM availability The ATPX method does not always exist on the dGPU, it may be located at the iGPU. The parent device of the iGPU is the root port for which bridge_d3 is false. This accidentally enables the legacy PM method which conflicts with port PM and prevented the dGPU from powering on. Ported from amdgpu commit: drm/amdgpu: fix check for port PM availability from Peter Wu. Fixes: d3ac31f3b4bf9fad (drm/radeon: fix power state when port pm is unavailable (v2)) Signed-off-by: Alex Deucher Cc: Peter Wu Cc: # 4.8+ --- drivers/gpu/drm/radeon/radeon_atpx_handler.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c index 4129b12521a6..0ae13cd2adda 100644 --- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c +++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c @@ -479,7 +479,6 @@ static int radeon_atpx_power_state(enum vga_switcheroo_client_id id, */ static bool radeon_atpx_pci_probe_handle(struct pci_dev *pdev) { - struct pci_dev *parent_pdev = pci_upstream_bridge(pdev); acpi_handle dhandle, atpx_handle; acpi_status status; @@ -493,7 +492,6 @@ static bool radeon_atpx_pci_probe_handle(struct pci_dev *pdev) radeon_atpx_priv.dhandle = dhandle; radeon_atpx_priv.atpx.handle = atpx_handle; - radeon_atpx_priv.bridge_pm_usable = parent_pdev && parent_pdev->bridge_d3; return true; } @@ -555,11 +553,16 @@ static bool radeon_atpx_detect(void) struct pci_dev *pdev = NULL; bool has_atpx = false; int vga_count = 0; + bool d3_supported = false; + struct pci_dev *parent_pdev; while ((pdev = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, pdev)) != NULL) { vga_count++; has_atpx |= (radeon_atpx_pci_probe_handle(pdev) == true); + + parent_pdev = pci_upstream_bridge(pdev); + d3_supported |= parent_pdev && parent_pdev->bridge_d3; } /* some newer PX laptops mark the dGPU as a non-VGA display device */ @@ -567,6 +570,9 @@ static bool radeon_atpx_detect(void) vga_count++; has_atpx |= (radeon_atpx_pci_probe_handle(pdev) == true); + + parent_pdev = pci_upstream_bridge(pdev); + d3_supported |= parent_pdev && parent_pdev->bridge_d3; } if (has_atpx && vga_count == 2) { @@ -574,6 +580,7 @@ static bool radeon_atpx_detect(void) printk(KERN_INFO "vga_switcheroo: detected switching method %s handle\n", acpi_method_name); radeon_atpx_priv.atpx_detected = true; + radeon_atpx_priv.bridge_pm_usable = d3_supported; radeon_atpx_init(); return true; } -- cgit v1.2.3 From e94bd1736f1f60e916a85a80c0b0ebeaae36cce5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Wed, 30 Nov 2016 17:30:01 +0900 Subject: drm: Don't call drm_for_each_crtc with a non-KMS driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes oops if userspace calls DRM_IOCTL_GET_CAP for DRM_CAP_PAGE_FLIP_TARGET on a non-KMS device node. (Normal userspace doesn't do that, discovered by syzkaller) Reported-by: Dmitry Vyukov Fixes: f837297ad824 ("drm: Add DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE/RELATIVE flags v2") Cc: stable@vger.kernel.org Signed-off-by: Michel Dänzer Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20161130083002.1520-1-michel@daenzer.net --- drivers/gpu/drm/drm_ioctl.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c index 0ad2c47f808f..71c3473476c7 100644 --- a/drivers/gpu/drm/drm_ioctl.c +++ b/drivers/gpu/drm/drm_ioctl.c @@ -254,10 +254,12 @@ static int drm_getcap(struct drm_device *dev, void *data, struct drm_file *file_ req->value = dev->mode_config.async_page_flip; break; case DRM_CAP_PAGE_FLIP_TARGET: - req->value = 1; - drm_for_each_crtc(crtc, dev) { - if (!crtc->funcs->page_flip_target) - req->value = 0; + if (drm_core_check_feature(dev, DRIVER_MODESET)) { + req->value = 1; + drm_for_each_crtc(crtc, dev) { + if (!crtc->funcs->page_flip_target) + req->value = 0; + } } break; case DRM_CAP_CURSOR_WIDTH: -- cgit v1.2.3 From 2420489bcb8910188578acc0c11c75445c2e4b92 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 14 Nov 2016 11:29:30 +0000 Subject: drm/i915: Don't touch NULL sg on i915_gem_object_get_pages_gtt() error On the DMA mapping error path, sg may be NULL (it has already been marked as the last scatterlist entry), and we should avoid dereferencing it again. Reported-by: Dan Carpenter Fixes: e227330223a7 ("drm/i915: avoid leaking DMA mappings") Signed-off-by: Chris Wilson Cc: Imre Deak Cc: stable@vger.kernel.org Link: http://patchwork.freedesktop.org/patch/msgid/20161114112930.2033-1-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld (cherry picked from commit b17993b7b29612369270567643bcff814f4b3d7f) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 91ab7e9d6d2e..00eb4814b913 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2268,7 +2268,7 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj) page = shmem_read_mapping_page(mapping, i); if (IS_ERR(page)) { ret = PTR_ERR(page); - goto err_pages; + goto err_sg; } } #ifdef CONFIG_SWIOTLB @@ -2311,8 +2311,9 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj) return 0; -err_pages: +err_sg: sg_mark_end(sg); +err_pages: for_each_sgt_page(page, sgt_iter, st) put_page(page); sg_free_table(st); -- cgit v1.2.3 From e411072d5740a49cdc9d0713798c30440757e451 Mon Sep 17 00:00:00 2001 From: Matthew Auld Date: Mon, 28 Nov 2016 10:36:48 +0000 Subject: drm/i915: drop the struct_mutex when wedged or trying to reset We grab the struct_mutex in intel_crtc_page_flip, but if we are wedged or a reset is in progress we bail early but never seem to actually release the lock. Fixes: 7f1847ebf48b ("drm/i915: Simplify checking of GPU reset_counter in display pageflips") Cc: Chris Wilson Signed-off-by: Matthew Auld Link: http://patchwork.freedesktop.org/patch/msgid/20161128103648.9235-1-matthew.auld@intel.com Reviewed-by: Joonas Lahtinen Reviewed-by: Chris Wilson Signed-off-by: Chris Wilson Cc: # v4.7+ (cherry picked from commit ddbb271aea87fc6004d3c8bcdb0710e980c7ec85) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 81c11499bcf0..3cb70d73239b 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -12260,7 +12260,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, intel_crtc->reset_count = i915_reset_count(&dev_priv->gpu_error); if (i915_reset_in_progress_or_wedged(&dev_priv->gpu_error)) { ret = -EIO; - goto cleanup; + goto unlock; } atomic_inc(&intel_crtc->unpin_work_count); @@ -12352,6 +12352,7 @@ cleanup_unpin: intel_unpin_fb_obj(fb, crtc->primary->state->rotation); cleanup_pending: atomic_dec(&intel_crtc->unpin_work_count); +unlock: mutex_unlock(&dev->struct_mutex); cleanup: crtc->primary->fb = old_fb; -- cgit v1.2.3 From faefba95c9e8ca3a523831c2ec2150f5ea054dae Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 6 Dec 2016 10:38:29 -0500 Subject: drm/amdgpu: just suspend the hw on pci shutdown MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We can't just reuse pci_remove as there may be userspace still doing things. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98638 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97980 Reviewed-by: Christian König Reported-and-tested-by: Mike Lothian Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 1 + drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 2 +- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 5 ++++- 3 files changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index 496f72b134eb..05c2850c04b0 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -2472,6 +2472,7 @@ void amdgpu_driver_postclose_kms(struct drm_device *dev, struct drm_file *file_priv); void amdgpu_driver_preclose_kms(struct drm_device *dev, struct drm_file *file_priv); +int amdgpu_suspend(struct amdgpu_device *adev); int amdgpu_device_suspend(struct drm_device *dev, bool suspend, bool fbcon); int amdgpu_device_resume(struct drm_device *dev, bool resume, bool fbcon); u32 amdgpu_get_vblank_counter_kms(struct drm_device *dev, unsigned int pipe); diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 3161d77bf299..e41d4baebf86 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -1493,7 +1493,7 @@ static int amdgpu_fini(struct amdgpu_device *adev) return 0; } -static int amdgpu_suspend(struct amdgpu_device *adev) +int amdgpu_suspend(struct amdgpu_device *adev) { int i, r; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 02ff0747197c..e0890deccb2f 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -479,12 +479,15 @@ amdgpu_pci_remove(struct pci_dev *pdev) static void amdgpu_pci_shutdown(struct pci_dev *pdev) { + struct drm_device *dev = pci_get_drvdata(pdev); + struct amdgpu_device *adev = dev->dev_private; + /* if we are running in a VM, make sure the device * torn down properly on reboot/shutdown. * unfortunately we can't detect certain * hypervisors so just do this all the time. */ - amdgpu_pci_remove(pdev); + amdgpu_suspend(adev); } static int amdgpu_pmops_suspend(struct device *dev) -- cgit v1.2.3