From 745fd50f3b044db6a3922e1718306555613164b0 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 31 Jan 2018 12:04:50 +0100 Subject: drm/cirrus: Load lut in crtc_commit In the past the ast driver relied upon the fbdev emulation helpers to call ->load_lut at boot-up. But since commit b8e2b0199cc377617dc238f5106352c06dcd3fa2 Author: Peter Rosin Date: Tue Jul 4 12:36:57 2017 +0200 drm/fb-helper: factor out pseudo-palette that's cleaned up and drivers are expected to boot into a consistent lut state. This patch fixes that. Fixes: b8e2b0199cc3 ("drm/fb-helper: factor out pseudo-palette") Cc: Peter Rosin Cc: Daniel Vetter Cc: # v4.14+ References: https://bugzilla.kernel.org/show_bug.cgi?id=198123 Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20180131110450.22153-1-daniel.vetter@ffwll.ch Signed-off-by: Gerd Hoffmann --- drivers/gpu/drm/cirrus/cirrus_mode.c | 40 +++++++++++++++++++++--------------- 1 file changed, 23 insertions(+), 17 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/cirrus/cirrus_mode.c b/drivers/gpu/drm/cirrus/cirrus_mode.c index cd23b1b28259..c91b9b054e3f 100644 --- a/drivers/gpu/drm/cirrus/cirrus_mode.c +++ b/drivers/gpu/drm/cirrus/cirrus_mode.c @@ -294,22 +294,7 @@ static void cirrus_crtc_prepare(struct drm_crtc *crtc) { } -/* - * This is called after a mode is programmed. It should reverse anything done - * by the prepare function - */ -static void cirrus_crtc_commit(struct drm_crtc *crtc) -{ -} - -/* - * The core can pass us a set of gamma values to program. We actually only - * use this for 8-bit mode so can't perform smooth fades on deeper modes, - * but it's a requirement that we provide the function - */ -static int cirrus_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, - u16 *blue, uint32_t size, - struct drm_modeset_acquire_ctx *ctx) +static void cirrus_crtc_load_lut(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct cirrus_device *cdev = dev->dev_private; @@ -317,7 +302,7 @@ static int cirrus_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, int i; if (!crtc->enabled) - return 0; + return; r = crtc->gamma_store; g = r + crtc->gamma_size; @@ -330,6 +315,27 @@ static int cirrus_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, WREG8(PALETTE_DATA, *g++ >> 8); WREG8(PALETTE_DATA, *b++ >> 8); } +} + +/* + * This is called after a mode is programmed. It should reverse anything done + * by the prepare function + */ +static void cirrus_crtc_commit(struct drm_crtc *crtc) +{ + cirrus_crtc_load_lut(crtc); +} + +/* + * The core can pass us a set of gamma values to program. We actually only + * use this for 8-bit mode so can't perform smooth fades on deeper modes, + * but it's a requirement that we provide the function + */ +static int cirrus_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, + u16 *blue, uint32_t size, + struct drm_modeset_acquire_ctx *ctx) +{ + cirrus_crtc_load_lut(crtc); return 0; } -- cgit v1.2.3 From 54f809cfbd6b4a43959039f5d33596ed3297ce16 Mon Sep 17 00:00:00 2001 From: "Leo (Sunpeng) Li" Date: Wed, 17 Jan 2018 12:51:08 +0100 Subject: drm/atomic: Fix memleak on ERESTARTSYS during non-blocking commits During a non-blocking commit, it is possible to return before the commit_tail work is queued (-ERESTARTSYS, for example). Since a reference on the crtc commit object is obtained for the pending vblank event when preparing the commit, the above situation will leave us with an extra reference. Therefore, if the commit_tail worker has not consumed the event at the end of a commit, release it's reference. Changes since v1: - Also check for state->event->base.completion being set, to handle the case where stall_checks() fails in setup_crtc_commit(). Changes since v2: - Add a flag to drm_crtc_commit, to prevent dereferencing a freed event. i915 may unreference the state in a worker. Fixes: 24835e442f28 ("drm: reference count event->completion") Cc: # v4.11+ Signed-off-by: Leo (Sunpeng) Li Acked-by: Harry Wentland #v1 Signed-off-by: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/20180117115108.29608-1-maarten.lankhorst@linux.intel.com Reviewed-by: Sean Paul --- drivers/gpu/drm/drm_atomic_helper.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index b16f1d69a0bb..e8c249361d7e 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -1778,6 +1778,8 @@ int drm_atomic_helper_setup_commit(struct drm_atomic_state *state, new_crtc_state->event->base.completion = &commit->flip_done; new_crtc_state->event->base.completion_release = release_crtc_commit; drm_crtc_commit_get(commit); + + commit->abort_completion = true; } for_each_oldnew_connector_in_state(state, conn, old_conn_state, new_conn_state, i) { @@ -3327,8 +3329,21 @@ EXPORT_SYMBOL(drm_atomic_helper_crtc_duplicate_state); void __drm_atomic_helper_crtc_destroy_state(struct drm_crtc_state *state) { if (state->commit) { + /* + * In the event that a non-blocking commit returns + * -ERESTARTSYS before the commit_tail work is queued, we will + * have an extra reference to the commit object. Release it, if + * the event has not been consumed by the worker. + * + * state->event may be freed, so we can't directly look at + * state->event->base.completion. + */ + if (state->event && state->commit->abort_completion) + drm_crtc_commit_put(state->commit); + kfree(state->commit->event); state->commit->event = NULL; + drm_crtc_commit_put(state->commit); } -- cgit v1.2.3 From 6e59de2048eb375a9bfcd39461ef841cd2a78962 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Thu, 8 Feb 2018 17:46:01 +0800 Subject: drm/amdgpu: add new device to use atpx quirk The affected system (0x0813) is pretty similar to another one (0x0812), it also needs to use ATPX power control. Signed-off-by: Kai-Heng Feng Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c index e2c3c5ec42d1..c53095b3b0fb 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c @@ -568,6 +568,7 @@ static const struct amdgpu_px_quirk amdgpu_px_quirk_list[] = { /* HG _PR3 doesn't seem to work on this A+A weston board */ { 0x1002, 0x6900, 0x1002, 0x0124, AMDGPU_PX_QUIRK_FORCE_ATPX }, { 0x1002, 0x6900, 0x1028, 0x0812, AMDGPU_PX_QUIRK_FORCE_ATPX }, + { 0x1002, 0x6900, 0x1028, 0x0813, AMDGPU_PX_QUIRK_FORCE_ATPX }, { 0, 0, 0, 0, 0 }, }; -- cgit v1.2.3 From 75b0e73023ef7994348d619e9adadab0e96bb195 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 8 Feb 2018 10:24:02 +0000 Subject: drm/i915/perf: Fix compiler warning for string truncation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/gpu/drm/i915/i915_oa_cflgt3.c: In function ‘i915_perf_load_test_config_cflgt3’: drivers/gpu/drm/i915/i915_oa_cflgt3.c:87:2: error: ‘strncpy’ output truncated before terminating nul copying 36 bytes from a string of the same length [-Werror=stringop-truncation] v2: strlcpy Fixes: 4407eaa9b0cc ("drm/i915/perf: add support for Coffeelake GT3") Signed-off-by: Chris Wilson Cc: Lionel Landwerlin Cc: Matthew Auld Reviewed-by: Lionel Landwerlin Link: https://patchwork.freedesktop.org/patch/msgid/20180208102403.5587-1-chris@chris-wilson.co.uk (cherry picked from commit 43df81d324cdd7056ad0ce3df709aff8dce856b7) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/i915_oa_cflgt3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_oa_cflgt3.c b/drivers/gpu/drm/i915/i915_oa_cflgt3.c index 42ff06fe54a3..792facdb6702 100644 --- a/drivers/gpu/drm/i915/i915_oa_cflgt3.c +++ b/drivers/gpu/drm/i915/i915_oa_cflgt3.c @@ -84,9 +84,9 @@ show_test_oa_id(struct device *kdev, struct device_attribute *attr, char *buf) void i915_perf_load_test_config_cflgt3(struct drm_i915_private *dev_priv) { - strncpy(dev_priv->perf.oa.test_config.uuid, + strlcpy(dev_priv->perf.oa.test_config.uuid, "577e8e2c-3fa0-4875-8743-3538d585e3b0", - UUID_STRING_LEN); + sizeof(dev_priv->perf.oa.test_config.uuid)); dev_priv->perf.oa.test_config.id = 1; dev_priv->perf.oa.test_config.mux_regs = mux_config_test_oa; -- cgit v1.2.3 From 73b0fcd24ef1b8e20b7f6e6babcde540d96d0cb2 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 8 Feb 2018 10:24:03 +0000 Subject: drm/i915/perf: Fix compiler warning for string truncation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/gpu/drm/i915/i915_oa_cnl.c: In function ‘i915_perf_load_test_config_cnl’: drivers/gpu/drm/i915/i915_oa_cnl.c:99:2: error: ‘strncpy’ output truncated before terminating nul copying 36 bytes from a string of the same length [-Werror=stringop-truncation] v2: strlcpy Fixes: 95690a02fb5d ("drm/i915/perf: enable perf support on CNL") Signed-off-by: Chris Wilson Cc: Lionel Landwerlin Cc: Matthew Auld Reviewed-by: Lionel Landwerlin Link: https://patchwork.freedesktop.org/patch/msgid/20180208102403.5587-2-chris@chris-wilson.co.uk (cherry picked from commit 020580ff8edd50e64ae1bf47e560c61e5e2f29fc) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/i915_oa_cnl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_oa_cnl.c b/drivers/gpu/drm/i915/i915_oa_cnl.c index ff0ac3627cc4..ba9140c87cc0 100644 --- a/drivers/gpu/drm/i915/i915_oa_cnl.c +++ b/drivers/gpu/drm/i915/i915_oa_cnl.c @@ -96,9 +96,9 @@ show_test_oa_id(struct device *kdev, struct device_attribute *attr, char *buf) void i915_perf_load_test_config_cnl(struct drm_i915_private *dev_priv) { - strncpy(dev_priv->perf.oa.test_config.uuid, + strlcpy(dev_priv->perf.oa.test_config.uuid, "db41edd4-d8e7-4730-ad11-b9a2d6833503", - UUID_STRING_LEN); + sizeof(dev_priv->perf.oa.test_config.uuid)); dev_priv->perf.oa.test_config.id = 1; dev_priv->perf.oa.test_config.mux_regs = mux_config_test_oa; -- cgit v1.2.3 From 33afe065b66f226ee5f90ab24ff55799c896e381 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 8 Feb 2018 08:51:51 +0000 Subject: drm/i915: Avoid truncation before clamping userspace's priority value Userspace provides a 64b value for the priority, we need to be careful to preserve the full range before validation to prevent truncation (and letting an illegal value pass). Reported-by: Antonio Argenziano Fixes: ac14fbd460d0 ("drm/i915/scheduler: Support user-defined priorities") Signed-off-by: Chris Wilson Cc: Antonio Argenziano Cc: Michal Winiarski Cc: Mika Kuoppala Cc: Joonas Lahtinen Link: https://patchwork.freedesktop.org/patch/msgid/20180208085151.11480-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen (cherry picked from commit 11a18f631959fd1ca10856c836a827683536770c) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/i915_gem_context.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c index 648e7536ff51..0c963fcf31ff 100644 --- a/drivers/gpu/drm/i915/i915_gem_context.c +++ b/drivers/gpu/drm/i915/i915_gem_context.c @@ -803,7 +803,7 @@ int i915_gem_context_setparam_ioctl(struct drm_device *dev, void *data, case I915_CONTEXT_PARAM_PRIORITY: { - int priority = args->value; + s64 priority = args->value; if (args->size) ret = -EINVAL; -- cgit v1.2.3 From 7292b9e6586534fb43e4316ad8b508bf3d1212f7 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 12 Feb 2018 09:39:28 +0000 Subject: drm/i915: Don't wake the device up to check if the engine is asleep If the entire device is powered off, we can safely assume that the engine is also asleep (and idle). Reported-by: Tvrtko Ursulin Fixes: a091d4ee931b ("drm/i915: Hold a wakeref for probing the ring registers") Signed-off-by: Chris Wilson Cc: Tvrtko Ursulin Cc: Mika Kuoppala Reviewed-by: Mika Kuoppala Link: https://patchwork.freedesktop.org/patch/msgid/20180212093928.6005-1-chris@chris-wilson.co.uk (cherry picked from commit 74d00d28a15c8452f65de0a9477b52d95639cc63) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/intel_engine_cs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_engine_cs.c b/drivers/gpu/drm/i915/intel_engine_cs.c index d790bdc227ff..acc661aa9c0c 100644 --- a/drivers/gpu/drm/i915/intel_engine_cs.c +++ b/drivers/gpu/drm/i915/intel_engine_cs.c @@ -1458,7 +1458,9 @@ static bool ring_is_idle(struct intel_engine_cs *engine) struct drm_i915_private *dev_priv = engine->i915; bool idle = true; - intel_runtime_pm_get(dev_priv); + /* If the whole device is asleep, the engine must be idle */ + if (!intel_runtime_pm_get_if_in_use(dev_priv)) + return true; /* First check that no commands are left in the ring */ if ((I915_READ_HEAD(engine) & HEAD_ADDR) != -- cgit v1.2.3 From 117172c8f9d40ba1de8cb35c6e614422faa03330 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 13 Feb 2018 09:01:54 +0000 Subject: drm/i915/breadcrumbs: Ignore unsubmitted signalers When a request is preempted, it is unsubmitted from the HW queue and removed from the active list of breadcrumbs. In the process, this however triggers the signaler and it may see the clear rbtree with the old, and still valid, seqno, or it may match the cleared seqno with the now zero rq->global_seqno. This confuses the signaler into action and signaling the fence. Fixes: d6a2289d9d6b ("drm/i915: Remove the preempted request from the execution queue") Signed-off-by: Chris Wilson Cc: Tvrtko Ursulin Cc: Joonas Lahtinen Cc: # v4.12+ Reviewed-by: Tvrtko Ursulin Link: https://patchwork.freedesktop.org/patch/msgid/20180206094633.30181-1-chris@chris-wilson.co.uk (cherry picked from commit fd10e2ce9905030d922e179a8047a4d50daffd8e) Signed-off-by: Rodrigo Vivi Link: https://patchwork.freedesktop.org/patch/msgid/20180213090154.17373-1-chris@chris-wilson.co.uk --- drivers/gpu/drm/i915/intel_breadcrumbs.c | 29 ++++++++++------------------- 1 file changed, 10 insertions(+), 19 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_breadcrumbs.c b/drivers/gpu/drm/i915/intel_breadcrumbs.c index bd40fea16b4f..f54ddda9fdad 100644 --- a/drivers/gpu/drm/i915/intel_breadcrumbs.c +++ b/drivers/gpu/drm/i915/intel_breadcrumbs.c @@ -594,29 +594,16 @@ void intel_engine_remove_wait(struct intel_engine_cs *engine, spin_unlock_irq(&b->rb_lock); } -static bool signal_valid(const struct drm_i915_gem_request *request) -{ - return intel_wait_check_request(&request->signaling.wait, request); -} - static bool signal_complete(const struct drm_i915_gem_request *request) { if (!request) return false; - /* If another process served as the bottom-half it may have already - * signalled that this wait is already completed. - */ - if (intel_wait_complete(&request->signaling.wait)) - return signal_valid(request); - - /* Carefully check if the request is complete, giving time for the + /* + * Carefully check if the request is complete, giving time for the * seqno to be visible or if the GPU hung. */ - if (__i915_request_irq_complete(request)) - return true; - - return false; + return __i915_request_irq_complete(request); } static struct drm_i915_gem_request *to_signaler(struct rb_node *rb) @@ -659,9 +646,13 @@ static int intel_breadcrumbs_signaler(void *arg) request = i915_gem_request_get_rcu(request); rcu_read_unlock(); if (signal_complete(request)) { - local_bh_disable(); - dma_fence_signal(&request->fence); - local_bh_enable(); /* kick start the tasklets */ + if (!test_bit(DMA_FENCE_FLAG_SIGNALED_BIT, + &request->fence.flags)) { + local_bh_disable(); + dma_fence_signal(&request->fence); + GEM_BUG_ON(!i915_gem_request_completed(request)); + local_bh_enable(); /* kick start the tasklets */ + } spin_lock_irq(&b->rb_lock); -- cgit v1.2.3 From edb76b01ac1629bfe17158bea56fcc16bfb57854 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 13 Feb 2018 09:57:44 +0000 Subject: drm/i915: Lock out execlist tasklet while peeking inside for busy-stats In order to prevent a race condition where we may end up overaccounting the active state and leaving the busy-stats believing the GPU is 100% busy, lock out the tasklet while we reconstruct the busy state. There is no direct spinlock guard for the execlists->port[], so we need to utilise tasklet_disable() as a synchronous barrier to prevent it, the only writer to execlists->port[], from running at the same time as the enable. Fixes: 4900727d35bb ("drm/i915/pmu: Reconstruct active state on starting busy-stats") Signed-off-by: Chris Wilson Cc: Tvrtko Ursulin Link: https://patchwork.freedesktop.org/patch/msgid/20180115092041.13509-1-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin (cherry picked from commit 99e48bf98dd036090b480a12c39e8b971731247e) Signed-off-by: Rodrigo Vivi Link: https://patchwork.freedesktop.org/patch/msgid/20180213095747.2424-1-tvrtko.ursulin@linux.intel.com --- drivers/gpu/drm/i915/intel_engine_cs.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_engine_cs.c b/drivers/gpu/drm/i915/intel_engine_cs.c index acc661aa9c0c..fa960cfd2764 100644 --- a/drivers/gpu/drm/i915/intel_engine_cs.c +++ b/drivers/gpu/drm/i915/intel_engine_cs.c @@ -1945,16 +1945,22 @@ intel_engine_lookup_user(struct drm_i915_private *i915, u8 class, u8 instance) */ int intel_enable_engine_stats(struct intel_engine_cs *engine) { + struct intel_engine_execlists *execlists = &engine->execlists; unsigned long flags; + int err = 0; if (!intel_engine_supports_stats(engine)) return -ENODEV; + tasklet_disable(&execlists->tasklet); spin_lock_irqsave(&engine->stats.lock, flags); - if (engine->stats.enabled == ~0) - goto busy; + + if (unlikely(engine->stats.enabled == ~0)) { + err = -EBUSY; + goto unlock; + } + if (engine->stats.enabled++ == 0) { - struct intel_engine_execlists *execlists = &engine->execlists; const struct execlist_port *port = execlists->port; unsigned int num_ports = execlists_num_ports(execlists); @@ -1969,14 +1975,12 @@ int intel_enable_engine_stats(struct intel_engine_cs *engine) if (engine->stats.active) engine->stats.start = engine->stats.enabled_at; } - spin_unlock_irqrestore(&engine->stats.lock, flags); - return 0; - -busy: +unlock: spin_unlock_irqrestore(&engine->stats.lock, flags); + tasklet_enable(&execlists->tasklet); - return -EBUSY; + return err; } static ktime_t __intel_engine_get_busy_time(struct intel_engine_cs *engine) -- cgit v1.2.3 From d3f84c8b097001e3f31f584b793493cb0033a7ae Mon Sep 17 00:00:00 2001 From: Tvrtko Ursulin Date: Tue, 13 Feb 2018 09:57:45 +0000 Subject: drm/i915/pmu: Fix PMU enable vs execlists tasklet race Commit 99e48bf98dd0 ("drm/i915: Lock out execlist tasklet while peeking inside for busy-stats") added a tasklet_disable call in busy stats enabling, but we failed to understand that the PMU enable callback runs as an hard IRQ (IPI). Consequence of this is that the PMU enable callback can interrupt the execlists tasklet, and will then deadlock when it calls intel_engine_stats_enable->tasklet_disable. To fix this, I realized it is possible to move the engine stats enablement and disablement to PMU event init and destroy hooks. This allows for much simpler implementation since those hooks run in normal context (can sleep). v2: Extract engine_event_destroy. (Chris Wilson) Signed-off-by: Tvrtko Ursulin Fixes: 99e48bf98dd0 ("drm/i915: Lock out execlist tasklet while peeking inside for busy-stats") Testcase: igt/perf_pmu/enable-race-* Cc: Chris Wilson Cc: Tvrtko Ursulin Cc: Jani Nikula Cc: Joonas Lahtinen Cc: Rodrigo Vivi Cc: intel-gfx@lists.freedesktop.org Reviewed-by: Chris Wilson Link: https://patchwork.freedesktop.org/patch/msgid/20180205093448.13877-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit b2f78cda260bc6a1a2d382b1d85a29e69b5b3724) Signed-off-by: Rodrigo Vivi Link: https://patchwork.freedesktop.org/patch/msgid/20180213095747.2424-2-tvrtko.ursulin@linux.intel.com --- drivers/gpu/drm/i915/i915_pmu.c | 125 +++++++++++++------------------- drivers/gpu/drm/i915/intel_ringbuffer.h | 14 ---- 2 files changed, 52 insertions(+), 87 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_pmu.c b/drivers/gpu/drm/i915/i915_pmu.c index 55a8a1e29424..337eaa6ede52 100644 --- a/drivers/gpu/drm/i915/i915_pmu.c +++ b/drivers/gpu/drm/i915/i915_pmu.c @@ -285,26 +285,41 @@ static u64 count_interrupts(struct drm_i915_private *i915) return sum; } -static void i915_pmu_event_destroy(struct perf_event *event) +static void engine_event_destroy(struct perf_event *event) { - WARN_ON(event->parent); + struct drm_i915_private *i915 = + container_of(event->pmu, typeof(*i915), pmu.base); + struct intel_engine_cs *engine; + + engine = intel_engine_lookup_user(i915, + engine_event_class(event), + engine_event_instance(event)); + if (WARN_ON_ONCE(!engine)) + return; + + if (engine_event_sample(event) == I915_SAMPLE_BUSY && + intel_engine_supports_stats(engine)) + intel_disable_engine_stats(engine); } -static int engine_event_init(struct perf_event *event) +static void i915_pmu_event_destroy(struct perf_event *event) { - struct drm_i915_private *i915 = - container_of(event->pmu, typeof(*i915), pmu.base); + WARN_ON(event->parent); - if (!intel_engine_lookup_user(i915, engine_event_class(event), - engine_event_instance(event))) - return -ENODEV; + if (is_engine_event(event)) + engine_event_destroy(event); +} - switch (engine_event_sample(event)) { +static int +engine_event_status(struct intel_engine_cs *engine, + enum drm_i915_pmu_engine_sample sample) +{ + switch (sample) { case I915_SAMPLE_BUSY: case I915_SAMPLE_WAIT: break; case I915_SAMPLE_SEMA: - if (INTEL_GEN(i915) < 6) + if (INTEL_GEN(engine->i915) < 6) return -ENODEV; break; default: @@ -314,6 +329,30 @@ static int engine_event_init(struct perf_event *event) return 0; } +static int engine_event_init(struct perf_event *event) +{ + struct drm_i915_private *i915 = + container_of(event->pmu, typeof(*i915), pmu.base); + struct intel_engine_cs *engine; + u8 sample; + int ret; + + engine = intel_engine_lookup_user(i915, engine_event_class(event), + engine_event_instance(event)); + if (!engine) + return -ENODEV; + + sample = engine_event_sample(event); + ret = engine_event_status(engine, sample); + if (ret) + return ret; + + if (sample == I915_SAMPLE_BUSY && intel_engine_supports_stats(engine)) + ret = intel_enable_engine_stats(engine); + + return ret; +} + static int i915_pmu_event_init(struct perf_event *event) { struct drm_i915_private *i915 = @@ -387,7 +426,7 @@ static u64 __i915_pmu_event_read(struct perf_event *event) if (WARN_ON_ONCE(!engine)) { /* Do nothing */ } else if (sample == I915_SAMPLE_BUSY && - engine->pmu.busy_stats) { + intel_engine_supports_stats(engine)) { val = ktime_to_ns(intel_engine_get_busy_time(engine)); } else { val = engine->pmu.sample[sample].cur; @@ -442,12 +481,6 @@ again: local64_add(new - prev, &event->count); } -static bool engine_needs_busy_stats(struct intel_engine_cs *engine) -{ - return intel_engine_supports_stats(engine) && - (engine->pmu.enable & BIT(I915_SAMPLE_BUSY)); -} - static void i915_pmu_enable(struct perf_event *event) { struct drm_i915_private *i915 = @@ -487,21 +520,7 @@ static void i915_pmu_enable(struct perf_event *event) GEM_BUG_ON(sample >= I915_PMU_SAMPLE_BITS); GEM_BUG_ON(engine->pmu.enable_count[sample] == ~0); - if (engine->pmu.enable_count[sample]++ == 0) { - /* - * Enable engine busy stats tracking if needed or - * alternatively cancel the scheduled disable. - * - * If the delayed disable was pending, cancel it and - * in this case do not enable since it already is. - */ - if (engine_needs_busy_stats(engine) && - !engine->pmu.busy_stats) { - engine->pmu.busy_stats = true; - if (!cancel_delayed_work(&engine->pmu.disable_busy_stats)) - intel_enable_engine_stats(engine); - } - } + engine->pmu.enable_count[sample]++; } /* @@ -514,14 +533,6 @@ static void i915_pmu_enable(struct perf_event *event) spin_unlock_irqrestore(&i915->pmu.lock, flags); } -static void __disable_busy_stats(struct work_struct *work) -{ - struct intel_engine_cs *engine = - container_of(work, typeof(*engine), pmu.disable_busy_stats.work); - - intel_disable_engine_stats(engine); -} - static void i915_pmu_disable(struct perf_event *event) { struct drm_i915_private *i915 = @@ -545,26 +556,8 @@ static void i915_pmu_disable(struct perf_event *event) * Decrement the reference count and clear the enabled * bitmask when the last listener on an event goes away. */ - if (--engine->pmu.enable_count[sample] == 0) { + if (--engine->pmu.enable_count[sample] == 0) engine->pmu.enable &= ~BIT(sample); - if (!engine_needs_busy_stats(engine) && - engine->pmu.busy_stats) { - engine->pmu.busy_stats = false; - /* - * We request a delayed disable to handle the - * rapid on/off cycles on events, which can - * happen when tools like perf stat start, in a - * nicer way. - * - * In addition, this also helps with busy stats - * accuracy with background CPU offline/online - * migration events. - */ - queue_delayed_work(system_wq, - &engine->pmu.disable_busy_stats, - round_jiffies_up_relative(HZ)); - } - } } GEM_BUG_ON(bit >= I915_PMU_MASK_BITS); @@ -797,8 +790,6 @@ static void i915_pmu_unregister_cpuhp_state(struct drm_i915_private *i915) void i915_pmu_register(struct drm_i915_private *i915) { - struct intel_engine_cs *engine; - enum intel_engine_id id; int ret; if (INTEL_GEN(i915) <= 2) { @@ -820,10 +811,6 @@ void i915_pmu_register(struct drm_i915_private *i915) hrtimer_init(&i915->pmu.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); i915->pmu.timer.function = i915_sample; - for_each_engine(engine, i915, id) - INIT_DELAYED_WORK(&engine->pmu.disable_busy_stats, - __disable_busy_stats); - ret = perf_pmu_register(&i915->pmu.base, "i915", -1); if (ret) goto err; @@ -843,9 +830,6 @@ err: void i915_pmu_unregister(struct drm_i915_private *i915) { - struct intel_engine_cs *engine; - enum intel_engine_id id; - if (!i915->pmu.base.event_init) return; @@ -853,11 +837,6 @@ void i915_pmu_unregister(struct drm_i915_private *i915) hrtimer_cancel(&i915->pmu.timer); - for_each_engine(engine, i915, id) { - GEM_BUG_ON(engine->pmu.busy_stats); - flush_delayed_work(&engine->pmu.disable_busy_stats); - } - i915_pmu_unregister_cpuhp_state(i915); perf_pmu_unregister(&i915->pmu.base); diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h index c5ff203e42d6..a0e7a6c2a57c 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.h +++ b/drivers/gpu/drm/i915/intel_ringbuffer.h @@ -366,20 +366,6 @@ struct intel_engine_cs { */ #define I915_ENGINE_SAMPLE_MAX (I915_SAMPLE_SEMA + 1) struct i915_pmu_sample sample[I915_ENGINE_SAMPLE_MAX]; - /** - * @busy_stats: Has enablement of engine stats tracking been - * requested. - */ - bool busy_stats; - /** - * @disable_busy_stats: Work item for busy stats disabling. - * - * Same as with @enable_busy_stats action, with the difference - * that we delay it in case there are rapid enable-disable - * actions, which can happen during tool startup (like perf - * stat). - */ - struct delayed_work disable_busy_stats; } pmu; /* -- cgit v1.2.3 From 4c83f0a788ccf58864f781585d8ae7c7e6a7e07d Mon Sep 17 00:00:00 2001 From: Tvrtko Ursulin Date: Tue, 13 Feb 2018 09:57:46 +0000 Subject: drm/i915/pmu: Fix sleep under atomic in RC6 readout We are not allowed to call intel_runtime_pm_get from the PMU counter read callback since the former can sleep, and the latter is running under IRQ context. To workaround this, we record the last known RC6 and while runtime suspended estimate its increase by querying the runtime PM core timestamps. Downside of this approach is that we can temporarily lose a chunk of RC6 time, from the last PMU read-out to runtime suspend entry, but that will eventually catch up, once device comes back online and in the presence of PMU queries. Also, we have to be careful not to overshoot the RC6 estimate, so once resumed after a period of approximation, we only update the counter once it catches up. With the observation that RC6 is increasing while the device is suspended, this should not pose a problem and can only cause slight inaccuracies due clock base differences. v2: Simplify by estimating on top of PM core counters. (Imre) Signed-off-by: Tvrtko Ursulin Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104943 Fixes: 6060b6aec03c ("drm/i915/pmu: Add RC6 residency metrics") Testcase: igt/perf_pmu/rc6-runtime-pm Cc: Tvrtko Ursulin Cc: Chris Wilson Cc: Imre Deak Cc: Jani Nikula Cc: Joonas Lahtinen Cc: Rodrigo Vivi Cc: David Airlie Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Chris Wilson Link: https://patchwork.freedesktop.org/patch/msgid/20180206183311.17924-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 1fe699e30113ed6f6e853ff44710d256072ea627) Signed-off-by: Rodrigo Vivi Link: https://patchwork.freedesktop.org/patch/msgid/20180213095747.2424-3-tvrtko.ursulin@linux.intel.com --- drivers/gpu/drm/i915/i915_pmu.c | 93 ++++++++++++++++++++++++++++++++++------- drivers/gpu/drm/i915/i915_pmu.h | 6 +++ 2 files changed, 84 insertions(+), 15 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_pmu.c b/drivers/gpu/drm/i915/i915_pmu.c index 337eaa6ede52..e13859aaa2a3 100644 --- a/drivers/gpu/drm/i915/i915_pmu.c +++ b/drivers/gpu/drm/i915/i915_pmu.c @@ -409,7 +409,81 @@ static int i915_pmu_event_init(struct perf_event *event) return 0; } -static u64 __i915_pmu_event_read(struct perf_event *event) +static u64 get_rc6(struct drm_i915_private *i915, bool locked) +{ + unsigned long flags; + u64 val; + + if (intel_runtime_pm_get_if_in_use(i915)) { + val = intel_rc6_residency_ns(i915, IS_VALLEYVIEW(i915) ? + VLV_GT_RENDER_RC6 : + GEN6_GT_GFX_RC6); + + if (HAS_RC6p(i915)) + val += intel_rc6_residency_ns(i915, GEN6_GT_GFX_RC6p); + + if (HAS_RC6pp(i915)) + val += intel_rc6_residency_ns(i915, GEN6_GT_GFX_RC6pp); + + intel_runtime_pm_put(i915); + + /* + * If we are coming back from being runtime suspended we must + * be careful not to report a larger value than returned + * previously. + */ + + if (!locked) + spin_lock_irqsave(&i915->pmu.lock, flags); + + if (val >= i915->pmu.sample[__I915_SAMPLE_RC6_ESTIMATED].cur) { + i915->pmu.sample[__I915_SAMPLE_RC6_ESTIMATED].cur = 0; + i915->pmu.sample[__I915_SAMPLE_RC6].cur = val; + } else { + val = i915->pmu.sample[__I915_SAMPLE_RC6_ESTIMATED].cur; + } + + if (!locked) + spin_unlock_irqrestore(&i915->pmu.lock, flags); + } else { + struct pci_dev *pdev = i915->drm.pdev; + struct device *kdev = &pdev->dev; + unsigned long flags2; + + /* + * We are runtime suspended. + * + * Report the delta from when the device was suspended to now, + * on top of the last known real value, as the approximated RC6 + * counter value. + */ + if (!locked) + spin_lock_irqsave(&i915->pmu.lock, flags); + + spin_lock_irqsave(&kdev->power.lock, flags2); + + if (!i915->pmu.sample[__I915_SAMPLE_RC6_ESTIMATED].cur) + i915->pmu.suspended_jiffies_last = + kdev->power.suspended_jiffies; + + val = kdev->power.suspended_jiffies - + i915->pmu.suspended_jiffies_last; + val += jiffies - kdev->power.accounting_timestamp; + + spin_unlock_irqrestore(&kdev->power.lock, flags2); + + val = jiffies_to_nsecs(val); + val += i915->pmu.sample[__I915_SAMPLE_RC6].cur; + i915->pmu.sample[__I915_SAMPLE_RC6_ESTIMATED].cur = val; + + if (!locked) + spin_unlock_irqrestore(&i915->pmu.lock, flags); + } + + return val; +} + +static u64 __i915_pmu_event_read(struct perf_event *event, bool locked) { struct drm_i915_private *i915 = container_of(event->pmu, typeof(*i915), pmu.base); @@ -447,18 +521,7 @@ static u64 __i915_pmu_event_read(struct perf_event *event) val = count_interrupts(i915); break; case I915_PMU_RC6_RESIDENCY: - intel_runtime_pm_get(i915); - val = intel_rc6_residency_ns(i915, - IS_VALLEYVIEW(i915) ? - VLV_GT_RENDER_RC6 : - GEN6_GT_GFX_RC6); - if (HAS_RC6p(i915)) - val += intel_rc6_residency_ns(i915, - GEN6_GT_GFX_RC6p); - if (HAS_RC6pp(i915)) - val += intel_rc6_residency_ns(i915, - GEN6_GT_GFX_RC6pp); - intel_runtime_pm_put(i915); + val = get_rc6(i915, locked); break; } } @@ -473,7 +536,7 @@ static void i915_pmu_event_read(struct perf_event *event) again: prev = local64_read(&hwc->prev_count); - new = __i915_pmu_event_read(event); + new = __i915_pmu_event_read(event, false); if (local64_cmpxchg(&hwc->prev_count, prev, new) != prev) goto again; @@ -528,7 +591,7 @@ static void i915_pmu_enable(struct perf_event *event) * for all listeners. Even when the event was already enabled and has * an existing non-zero value. */ - local64_set(&event->hw.prev_count, __i915_pmu_event_read(event)); + local64_set(&event->hw.prev_count, __i915_pmu_event_read(event, true)); spin_unlock_irqrestore(&i915->pmu.lock, flags); } diff --git a/drivers/gpu/drm/i915/i915_pmu.h b/drivers/gpu/drm/i915/i915_pmu.h index 40c154d13565..bb62df15afa4 100644 --- a/drivers/gpu/drm/i915/i915_pmu.h +++ b/drivers/gpu/drm/i915/i915_pmu.h @@ -27,6 +27,8 @@ enum { __I915_SAMPLE_FREQ_ACT = 0, __I915_SAMPLE_FREQ_REQ, + __I915_SAMPLE_RC6, + __I915_SAMPLE_RC6_ESTIMATED, __I915_NUM_PMU_SAMPLERS }; @@ -94,6 +96,10 @@ struct i915_pmu { * struct intel_engine_cs. */ struct i915_pmu_sample sample[__I915_NUM_PMU_SAMPLERS]; + /** + * @suspended_jiffies_last: Cached suspend time from PM core. + */ + unsigned long suspended_jiffies_last; }; #ifdef CONFIG_PERF_EVENTS -- cgit v1.2.3 From 4b8b41d15d9db54703958fbd2928a2fd319563f6 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 13 Feb 2018 09:57:47 +0000 Subject: drm/i915/pmu: Fix building without CONFIG_PM As we peek inside struct device to query members guarded by CONFIG_PM, so must be the code. Reported-by: kbuild test robot Fixes: 1fe699e30113 ("drm/i915/pmu: Fix sleep under atomic in RC6 readout") Signed-off-by: Chris Wilson Cc: Tvrtko Ursulin Reviewed-by: Tvrtko Ursulin Link: https://patchwork.freedesktop.org/patch/msgid/20180207160428.17015-1-chris@chris-wilson.co.uk (cherry picked from commit 05273c950a3c93c5f96be8807eaf24f2cc9f1c1e) Signed-off-by: Rodrigo Vivi Link: https://patchwork.freedesktop.org/patch/msgid/20180213095747.2424-4-tvrtko.ursulin@linux.intel.com --- drivers/gpu/drm/i915/i915_pmu.c | 33 +++++++++++++++++++++++---------- 1 file changed, 23 insertions(+), 10 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_pmu.c b/drivers/gpu/drm/i915/i915_pmu.c index e13859aaa2a3..0e9b98c32b62 100644 --- a/drivers/gpu/drm/i915/i915_pmu.c +++ b/drivers/gpu/drm/i915/i915_pmu.c @@ -409,22 +409,32 @@ static int i915_pmu_event_init(struct perf_event *event) return 0; } -static u64 get_rc6(struct drm_i915_private *i915, bool locked) +static u64 __get_rc6(struct drm_i915_private *i915) { - unsigned long flags; u64 val; - if (intel_runtime_pm_get_if_in_use(i915)) { - val = intel_rc6_residency_ns(i915, IS_VALLEYVIEW(i915) ? - VLV_GT_RENDER_RC6 : - GEN6_GT_GFX_RC6); + val = intel_rc6_residency_ns(i915, + IS_VALLEYVIEW(i915) ? + VLV_GT_RENDER_RC6 : + GEN6_GT_GFX_RC6); - if (HAS_RC6p(i915)) - val += intel_rc6_residency_ns(i915, GEN6_GT_GFX_RC6p); + if (HAS_RC6p(i915)) + val += intel_rc6_residency_ns(i915, GEN6_GT_GFX_RC6p); + + if (HAS_RC6pp(i915)) + val += intel_rc6_residency_ns(i915, GEN6_GT_GFX_RC6pp); + + return val; +} - if (HAS_RC6pp(i915)) - val += intel_rc6_residency_ns(i915, GEN6_GT_GFX_RC6pp); +static u64 get_rc6(struct drm_i915_private *i915, bool locked) +{ +#if IS_ENABLED(CONFIG_PM) + unsigned long flags; + u64 val; + if (intel_runtime_pm_get_if_in_use(i915)) { + val = __get_rc6(i915); intel_runtime_pm_put(i915); /* @@ -481,6 +491,9 @@ static u64 get_rc6(struct drm_i915_private *i915, bool locked) } return val; +#else + return __get_rc6(i915); +#endif } static u64 __i915_pmu_event_read(struct perf_event *event, bool locked) -- cgit v1.2.3 From 37ad4e68783088ed61493f54194cfccd3c87ab35 Mon Sep 17 00:00:00 2001 From: Weinan Li Date: Fri, 9 Feb 2018 16:01:34 +0800 Subject: drm/i915/gvt: add 0xe4f0 into gen9 render list Guest may set this register on KBL platform, it can impact hardware behavior, so add it into the gen9 render list. Otherwise gpu hang issue may happen during different vgpu switch. v2: separate it from patch set. Cc: Zhi Wang Cc: Zhenyu Wang Signed-off-by: Weinan Li Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/mmio_context.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/gvt/mmio_context.c b/drivers/gpu/drm/i915/gvt/mmio_context.c index 73ad6e90e49d..256f1bb522b7 100644 --- a/drivers/gpu/drm/i915/gvt/mmio_context.c +++ b/drivers/gpu/drm/i915/gvt/mmio_context.c @@ -118,6 +118,7 @@ static struct engine_mmio gen9_engine_mmio_list[] __cacheline_aligned = { {RCS, HALF_SLICE_CHICKEN3, 0xffff, true}, /* 0xe184 */ {RCS, GEN9_HALF_SLICE_CHICKEN5, 0xffff, true}, /* 0xe188 */ {RCS, GEN9_HALF_SLICE_CHICKEN7, 0xffff, true}, /* 0xe194 */ + {RCS, GEN8_ROW_CHICKEN, 0xffff, true}, /* 0xe4f0 */ {RCS, TRVATTL3PTRDW(0), 0, false}, /* 0x4de0 */ {RCS, TRVATTL3PTRDW(1), 0, false}, /* 0x4de4 */ {RCS, TRNULLDETCT, 0, false}, /* 0x4de8 */ -- cgit v1.2.3 From a26ca6ad4c4aa4afcbfe4c46c33ad98859736245 Mon Sep 17 00:00:00 2001 From: Tina Zhang Date: Sun, 11 Feb 2018 14:59:19 +0800 Subject: drm/i915/gvt: Support BAR0 8-byte reads/writes GGTT is in BAR0 with 8 bytes aligned. With a qemu patch (commit: 38d49e8c1523d97d2191190d3f7b4ce7a0ab5aa3), VFIO can use 8-byte reads/ writes to access it. This patch is to support the 8-byte GGTT reads/writes. Ideally, we would like to support 8-byte reads/writes for the total BAR0. But it needs more work for handling 8-byte MMIO reads/writes. This patch can fix the issue caused by partial updating GGTT entry, during guest booting up. v3: - Use intel_vgpu_get_bar_gpa() stead. (Zhenyu) - Include all the GGTT checking logic in gtt_entry(). (Zhenyu) v2: - Limit to GGTT entry. (Zhenyu) Signed-off-by: Tina Zhang Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/kvmgt.c | 51 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 49 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/gvt/kvmgt.c b/drivers/gpu/drm/i915/gvt/kvmgt.c index 909499b73d03..021f722e2481 100644 --- a/drivers/gpu/drm/i915/gvt/kvmgt.c +++ b/drivers/gpu/drm/i915/gvt/kvmgt.c @@ -733,6 +733,25 @@ static ssize_t intel_vgpu_rw(struct mdev_device *mdev, char *buf, return ret == 0 ? count : ret; } +static bool gtt_entry(struct mdev_device *mdev, loff_t *ppos) +{ + struct intel_vgpu *vgpu = mdev_get_drvdata(mdev); + unsigned int index = VFIO_PCI_OFFSET_TO_INDEX(*ppos); + struct intel_gvt *gvt = vgpu->gvt; + int offset; + + /* Only allow MMIO GGTT entry access */ + if (index != PCI_BASE_ADDRESS_0) + return false; + + offset = (u64)(*ppos & VFIO_PCI_OFFSET_MASK) - + intel_vgpu_get_bar_gpa(vgpu, PCI_BASE_ADDRESS_0); + + return (offset >= gvt->device_info.gtt_start_offset && + offset < gvt->device_info.gtt_start_offset + gvt_ggtt_sz(gvt)) ? + true : false; +} + static ssize_t intel_vgpu_read(struct mdev_device *mdev, char __user *buf, size_t count, loff_t *ppos) { @@ -742,7 +761,21 @@ static ssize_t intel_vgpu_read(struct mdev_device *mdev, char __user *buf, while (count) { size_t filled; - if (count >= 4 && !(*ppos % 4)) { + /* Only support GGTT entry 8 bytes read */ + if (count >= 8 && !(*ppos % 8) && + gtt_entry(mdev, ppos)) { + u64 val; + + ret = intel_vgpu_rw(mdev, (char *)&val, sizeof(val), + ppos, false); + if (ret <= 0) + goto read_err; + + if (copy_to_user(buf, &val, sizeof(val))) + goto read_err; + + filled = 8; + } else if (count >= 4 && !(*ppos % 4)) { u32 val; ret = intel_vgpu_rw(mdev, (char *)&val, sizeof(val), @@ -802,7 +835,21 @@ static ssize_t intel_vgpu_write(struct mdev_device *mdev, while (count) { size_t filled; - if (count >= 4 && !(*ppos % 4)) { + /* Only support GGTT entry 8 bytes write */ + if (count >= 8 && !(*ppos % 8) && + gtt_entry(mdev, ppos)) { + u64 val; + + if (copy_from_user(&val, buf, sizeof(val))) + goto write_err; + + ret = intel_vgpu_rw(mdev, (char *)&val, sizeof(val), + ppos, true); + if (ret <= 0) + goto write_err; + + filled = 8; + } else if (count >= 4 && !(*ppos % 4)) { u32 val; if (copy_from_user(&val, buf, sizeof(val))) -- cgit v1.2.3 From 3cc7644e4af179e79153b1fd60f9dd937ee32684 Mon Sep 17 00:00:00 2001 From: Weinan Li Date: Mon, 12 Feb 2018 15:28:42 +0800 Subject: drm/i915/gvt: fix one typo of render_mmio trace Fix one typo of render_mmio trace, exchange the mmio value of old and new. Signed-off-by: Weinan Li Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/trace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/gvt/trace.h b/drivers/gpu/drm/i915/gvt/trace.h index 7a2511538f34..736bd2bc5127 100644 --- a/drivers/gpu/drm/i915/gvt/trace.h +++ b/drivers/gpu/drm/i915/gvt/trace.h @@ -333,7 +333,7 @@ TRACE_EVENT(render_mmio, TP_PROTO(int old_id, int new_id, char *action, unsigned int reg, unsigned int old_val, unsigned int new_val), - TP_ARGS(old_id, new_id, action, reg, new_val, old_val), + TP_ARGS(old_id, new_id, action, reg, old_val, new_val), TP_STRUCT__entry( __field(int, old_id) -- cgit v1.2.3 From 405cacc947f7b58969b2a8ab1568c2d98b245308 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 20 Dec 2017 11:50:17 +0100 Subject: drm/i915/vlv: Add cdclk workaround for DSI MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit At least on the Chuwi Vi8 (non pro/plus) the LCD panel will show an image shifted aprox. 20% to the left (with wraparound) and sometimes also wrong colors, showing that the panel controller is starting with sampling the datastream somewhere mid-line. This happens after the first blanking and re-init of the panel. After looking at drm.debug output I noticed that initially we inherit the cdclk of 333333 KHz set by the GOP, but after the re-init we picked 266667 KHz, which turns out to be the cause of this problem, a quick hack to hard code the cdclk to 333333 KHz makes the problem go away. I've tested this on various Bay Trail devices, to make sure this not does cause regressions on other devices and the higher cdclk does not cause any problems on the following devices: -GP-electronic T701 1024x600 333333 KHz cdclk after this patch -PEAQ C1010 1920x1200 333333 KHz cdclk after this patch -PoV mobii-wintab-800w 800x1280 333333 KHz cdclk after this patch -Asus Transformer-T100TA 1368x768 320000 KHz cdclk after this patch Also interesting wrt this is the comment in vlv_calc_cdclk about the existing workaround to avoid 200 Mhz as clock because that causes issues in some cases. This commit extends the "do not use 200 Mhz" workaround with an extra check to require atleast 320000 KHz (avoiding 266667 KHz) when a DSI panel is active. Changes in v2: -Change the commit message and the code comment to not treat the GOP as a reference, the GOP should not be treated as a reference Acked-by: Ville Syrjälä Signed-off-by: Hans de Goede Link: https://patchwork.freedesktop.org/patch/msgid/20171220105017.11259-1-hdegoede@redhat.com (cherry picked from commit c8dae55a8ced625038d52d26e48273707fab2688) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/intel_cdclk.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c index 5dc118f26b51..1704c8897afd 100644 --- a/drivers/gpu/drm/i915/intel_cdclk.c +++ b/drivers/gpu/drm/i915/intel_cdclk.c @@ -1952,6 +1952,14 @@ int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state) if (crtc_state->has_audio && INTEL_GEN(dev_priv) >= 9) min_cdclk = max(2 * 96000, min_cdclk); + /* + * On Valleyview some DSI panels lose (v|h)sync when the clock is lower + * than 320000KHz. + */ + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) && + IS_VALLEYVIEW(dev_priv)) + min_cdclk = max(320000, min_cdclk); + if (min_cdclk > dev_priv->max_cdclk_freq) { DRM_DEBUG_KMS("required cdclk (%d kHz) exceeds max (%d kHz)\n", min_cdclk, dev_priv->max_cdclk_freq); -- cgit v1.2.3 From 7928e9bb09dc7f108a1a2b589ef1c7b86843569c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 14 Feb 2018 09:21:49 +0100 Subject: drm/i915: Add intel_bios_cleanup() function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add an intel_bios_cleanup() function to act as counterpart of intel_bios_init() and move the cleanup of vbt related resources there, putting it in the same file as the allocation. Changed in v2: -While touching the code anyways, remove the unnecessary: if (dev_priv->vbt.child_dev) done before kfree(dev_priv->vbt.child_dev) Reviewed-by: Ville Syrjälä Signed-off-by: Hans de Goede Link: https://patchwork.freedesktop.org/patch/msgid/20180214082151.25015-1-hdegoede@redhat.com (cherry picked from commit 785f076b3ba781804f2b22b347b4431e3efb0ab3) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/i915_drv.c | 14 +------------- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_bios.c | 15 +++++++++++++++ 3 files changed, 17 insertions(+), 13 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 173d0095e3b2..2f5209de0391 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -1433,19 +1433,7 @@ void i915_driver_unload(struct drm_device *dev) intel_modeset_cleanup(dev); - /* - * free the memory space allocated for the child device - * config parsed from VBT - */ - if (dev_priv->vbt.child_dev && dev_priv->vbt.child_dev_num) { - kfree(dev_priv->vbt.child_dev); - dev_priv->vbt.child_dev = NULL; - dev_priv->vbt.child_dev_num = 0; - } - kfree(dev_priv->vbt.sdvo_lvds_vbt_mode); - dev_priv->vbt.sdvo_lvds_vbt_mode = NULL; - kfree(dev_priv->vbt.lfp_lvds_vbt_mode); - dev_priv->vbt.lfp_lvds_vbt_mode = NULL; + intel_bios_cleanup(dev_priv); vga_switcheroo_unregister_client(pdev); vga_client_register(pdev, NULL, NULL, NULL); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index a42deebedb0f..d2fc519bc592 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -3657,6 +3657,7 @@ extern void intel_i2c_reset(struct drm_i915_private *dev_priv); /* intel_bios.c */ void intel_bios_init(struct drm_i915_private *dev_priv); +void intel_bios_cleanup(struct drm_i915_private *dev_priv); bool intel_bios_is_valid_vbt(const void *buf, size_t size); bool intel_bios_is_tv_present(struct drm_i915_private *dev_priv); bool intel_bios_is_lvds_present(struct drm_i915_private *dev_priv, u8 *i2c_pin); diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index f7f771749e48..57db816f962b 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -1588,6 +1588,21 @@ out: pci_unmap_rom(pdev, bios); } +/** + * intel_bios_cleanup - Free any resources allocated by intel_bios_init() + * @dev_priv: i915 device instance + */ +void intel_bios_cleanup(struct drm_i915_private *dev_priv) +{ + kfree(dev_priv->vbt.child_dev); + dev_priv->vbt.child_dev = NULL; + dev_priv->vbt.child_dev_num = 0; + kfree(dev_priv->vbt.sdvo_lvds_vbt_mode); + dev_priv->vbt.sdvo_lvds_vbt_mode = NULL; + kfree(dev_priv->vbt.lfp_lvds_vbt_mode); + dev_priv->vbt.lfp_lvds_vbt_mode = NULL; +} + /** * intel_bios_is_tv_present - is integrated TV present in VBT * @dev_priv: i915 device instance -- cgit v1.2.3 From ed0545a7fbb5241a27f45a084dd71522cdaea5b9 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 14 Feb 2018 09:21:50 +0100 Subject: drm/i915: Free memdup-ed DSI VBT data structures on driver_unload MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Make intel_bios_cleanup function free the DSI VBT data structures which are memdup-ed by parse_mipi_config() and parse_mipi_sequence(). Reviewed-by: Ville Syrjälä Signed-off-by: Hans de Goede Link: https://patchwork.freedesktop.org/patch/msgid/20180214082151.25015-2-hdegoede@redhat.com (cherry picked from commit e1b86c85f6c2029c31dba99823b6f3d9e15eaacd) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/intel_bios.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 57db816f962b..9a9b62c93889 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -1601,6 +1601,12 @@ void intel_bios_cleanup(struct drm_i915_private *dev_priv) dev_priv->vbt.sdvo_lvds_vbt_mode = NULL; kfree(dev_priv->vbt.lfp_lvds_vbt_mode); dev_priv->vbt.lfp_lvds_vbt_mode = NULL; + kfree(dev_priv->vbt.dsi.data); + dev_priv->vbt.dsi.data = NULL; + kfree(dev_priv->vbt.dsi.pps); + dev_priv->vbt.dsi.pps = NULL; + kfree(dev_priv->vbt.dsi.config); + dev_priv->vbt.dsi.config = NULL; } /** -- cgit v1.2.3 From ee622fe757f6de612dad0f01805eea815a5b3025 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 14 Feb 2018 09:21:51 +0100 Subject: drm/i915: Fix DSI panels with v1 MIPI sequences without a DEASSERT sequence v3 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit So far models of the Dell Venue 8 Pro, with a panel with MIPI panel index = 3, one of which has been kindly provided to me by Jan Brummer, where not working with the i915 driver, giving a black screen on the first modeset. The problem with at least these Dells is that their VBT defines a MIPI ASSERT sequence, but not a DEASSERT sequence. Instead they DEASSERT the reset in their INIT_OTP sequence, but the deassert must be done before calling intel_dsi_device_ready(), so that is too late. Simply doing the INIT_OTP sequence earlier is not enough to fix this, because the INIT_OTP sequence also sends various MIPI packets to the panel, which can only happen after calling intel_dsi_device_ready(). This commit fixes this by splitting the INIT_OTP sequence into everything before the first DSI packet and everything else, including the first DSI packet. The first part (everything before the first DSI packet) is then used as deassert sequence. Changed in v2: -Split the init OTP sequence into a deassert reset and the actual init OTP sequence, instead of calling it earlier and then having the first mipi_exec_send_packet() call call intel_dsi_device_ready(). Changes in v3: -Move the whole shebang to intel_bios.c Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82880 References: https://bugs.freedesktop.org/show_bug.cgi?id=101205 Cc: Jan-Michael Brummer Reported-by: Jan-Michael Brummer Tested-by: Hans de Goede Reviewed-by: Ville Syrjälä Acked-by: Jani Nikula Signed-off-by: Hans de Goede Link: https://patchwork.freedesktop.org/patch/msgid/20180214082151.25015-3-hdegoede@redhat.com (cherry picked from commit fb38e7ade9af4f3e96f5916c3f6f19bfc7d5f961) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_bios.c | 84 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 85 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index d2fc519bc592..d307429a5ae0 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1349,6 +1349,7 @@ struct intel_vbt_data { u32 size; u8 *data; const u8 *sequence[MIPI_SEQ_MAX]; + u8 *deassert_seq; /* Used by fixup_mipi_sequences() */ } dsi; int crt_ddc_pin; diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 9a9b62c93889..b49a2df44430 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -947,6 +947,86 @@ static int goto_next_sequence_v3(const u8 *data, int index, int total) return 0; } +/* + * Get len of pre-fixed deassert fragment from a v1 init OTP sequence, + * skip all delay + gpio operands and stop at the first DSI packet op. + */ +static int get_init_otp_deassert_fragment_len(struct drm_i915_private *dev_priv) +{ + const u8 *data = dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP]; + int index, len; + + if (WARN_ON(!data || dev_priv->vbt.dsi.seq_version != 1)) + return 0; + + /* index = 1 to skip sequence byte */ + for (index = 1; data[index] != MIPI_SEQ_ELEM_END; index += len) { + switch (data[index]) { + case MIPI_SEQ_ELEM_SEND_PKT: + return index == 1 ? 0 : index; + case MIPI_SEQ_ELEM_DELAY: + len = 5; /* 1 byte for operand + uint32 */ + break; + case MIPI_SEQ_ELEM_GPIO: + len = 3; /* 1 byte for op, 1 for gpio_nr, 1 for value */ + break; + default: + return 0; + } + } + + return 0; +} + +/* + * Some v1 VBT MIPI sequences do the deassert in the init OTP sequence. + * The deassert must be done before calling intel_dsi_device_ready, so for + * these devices we split the init OTP sequence into a deassert sequence and + * the actual init OTP part. + */ +static void fixup_mipi_sequences(struct drm_i915_private *dev_priv) +{ + u8 *init_otp; + int len; + + /* Limit this to VLV for now. */ + if (!IS_VALLEYVIEW(dev_priv)) + return; + + /* Limit this to v1 vid-mode sequences */ + if (dev_priv->vbt.dsi.config->is_cmd_mode || + dev_priv->vbt.dsi.seq_version != 1) + return; + + /* Only do this if there are otp and assert seqs and no deassert seq */ + if (!dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP] || + !dev_priv->vbt.dsi.sequence[MIPI_SEQ_ASSERT_RESET] || + dev_priv->vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET]) + return; + + /* The deassert-sequence ends at the first DSI packet */ + len = get_init_otp_deassert_fragment_len(dev_priv); + if (!len) + return; + + DRM_DEBUG_KMS("Using init OTP fragment to deassert reset\n"); + + /* Copy the fragment, update seq byte and terminate it */ + init_otp = (u8 *)dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP]; + dev_priv->vbt.dsi.deassert_seq = kmemdup(init_otp, len + 1, GFP_KERNEL); + if (!dev_priv->vbt.dsi.deassert_seq) + return; + dev_priv->vbt.dsi.deassert_seq[0] = MIPI_SEQ_DEASSERT_RESET; + dev_priv->vbt.dsi.deassert_seq[len] = MIPI_SEQ_ELEM_END; + /* Use the copy for deassert */ + dev_priv->vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET] = + dev_priv->vbt.dsi.deassert_seq; + /* Replace the last byte of the fragment with init OTP seq byte */ + init_otp[len - 1] = MIPI_SEQ_INIT_OTP; + /* And make MIPI_MIPI_SEQ_INIT_OTP point to it */ + dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP] = init_otp + len - 1; +} + static void parse_mipi_sequence(struct drm_i915_private *dev_priv, const struct bdb_header *bdb) @@ -1016,6 +1096,8 @@ parse_mipi_sequence(struct drm_i915_private *dev_priv, dev_priv->vbt.dsi.size = seq_size; dev_priv->vbt.dsi.seq_version = sequence->version; + fixup_mipi_sequences(dev_priv); + DRM_DEBUG_DRIVER("MIPI related VBT parsing complete\n"); return; @@ -1607,6 +1689,8 @@ void intel_bios_cleanup(struct drm_i915_private *dev_priv) dev_priv->vbt.dsi.pps = NULL; kfree(dev_priv->vbt.dsi.config); dev_priv->vbt.dsi.config = NULL; + kfree(dev_priv->vbt.dsi.deassert_seq); + dev_priv->vbt.dsi.deassert_seq = NULL; } /** -- cgit v1.2.3 From 92256269893e96e5f9e8ac6dd882a0bef63fcea7 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 7 Feb 2018 18:40:27 +0100 Subject: drm/nouveau: Make clock gate support conditional The recently introduced clock gate support breaks on Tegra chips because no thermal support is enabled for those devices. Conditionalize the code on the existence of thermal support to fix this. Fixes: b138eca661cc ("drm/nouveau: Add support for basic clockgating on Kepler1") Cc: Martin Peres Cc: Lyude Paul Signed-off-by: Thierry Reding Reviewed-by: Lyude Paul Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c index bf62303571b3..3695cde669f8 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c @@ -301,7 +301,7 @@ nvkm_therm_attr_set(struct nvkm_therm *therm, void nvkm_therm_clkgate_enable(struct nvkm_therm *therm) { - if (!therm->func->clkgate_enable || !therm->clkgating_enabled) + if (!therm || !therm->func->clkgate_enable || !therm->clkgating_enabled) return; nvkm_debug(&therm->subdev, @@ -312,7 +312,7 @@ nvkm_therm_clkgate_enable(struct nvkm_therm *therm) void nvkm_therm_clkgate_fini(struct nvkm_therm *therm, bool suspend) { - if (!therm->func->clkgate_fini || !therm->clkgating_enabled) + if (!therm || !therm->func->clkgate_fini || !therm->clkgating_enabled) return; nvkm_debug(&therm->subdev, @@ -395,7 +395,7 @@ void nvkm_therm_clkgate_init(struct nvkm_therm *therm, const struct nvkm_therm_clkgate_pack *p) { - if (!therm->func->clkgate_init || !therm->clkgating_enabled) + if (!therm || !therm->func->clkgate_init || !therm->clkgating_enabled) return; therm->func->clkgate_init(therm, p); -- cgit v1.2.3 From 25c058ccaf2ebbc3e250ec1e199e161f91fe27d4 Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Wed, 14 Feb 2018 06:41:25 +0100 Subject: drm: Allow determining if current task is output poll worker Introduce a helper to determine if the current task is an output poll worker. This allows us to fix a long-standing deadlock in several DRM drivers wherein the ->runtime_suspend callback waits for the output poll worker to finish and the worker in turn calls a ->detect callback which waits for runtime suspend to finish. The ->detect callback is invoked from multiple call sites and waiting for runtime suspend to finish is the correct thing to do except if it's executing in the context of the worker. v2: Expand kerneldoc to specifically mention deadlock between output poll worker and autosuspend worker as use case. (Lyude) Cc: Dave Airlie Cc: Ben Skeggs Cc: Alex Deucher Reviewed-by: Lyude Paul Signed-off-by: Lukas Wunner Link: https://patchwork.freedesktop.org/patch/msgid/3549ce32e7f1467102e70d3e9cbf70c46bfe108e.1518593424.git.lukas@wunner.de --- drivers/gpu/drm/drm_probe_helper.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c index 6dc2dde5b672..7a6b2dc08913 100644 --- a/drivers/gpu/drm/drm_probe_helper.c +++ b/drivers/gpu/drm/drm_probe_helper.c @@ -654,6 +654,26 @@ out: schedule_delayed_work(delayed_work, DRM_OUTPUT_POLL_PERIOD); } +/** + * drm_kms_helper_is_poll_worker - is %current task an output poll worker? + * + * Determine if %current task is an output poll worker. This can be used + * to select distinct code paths for output polling versus other contexts. + * + * One use case is to avoid a deadlock between the output poll worker and + * the autosuspend worker wherein the latter waits for polling to finish + * upon calling drm_kms_helper_poll_disable(), while the former waits for + * runtime suspend to finish upon calling pm_runtime_get_sync() in a + * connector ->detect hook. + */ +bool drm_kms_helper_is_poll_worker(void) +{ + struct work_struct *work = current_work(); + + return work && work->func == output_poll_execute; +} +EXPORT_SYMBOL(drm_kms_helper_is_poll_worker); + /** * drm_kms_helper_poll_disable - disable output polling * @dev: drm_device -- cgit v1.2.3 From d61a5c1063515e855bedb1b81e20e50b0ac3541e Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Sun, 11 Feb 2018 10:38:28 +0100 Subject: drm/nouveau: Fix deadlock on runtime suspend nouveau's ->runtime_suspend hook calls drm_kms_helper_poll_disable(), which waits for the output poll worker to finish if it's running. The output poll worker meanwhile calls pm_runtime_get_sync() in nouveau_connector_detect() which waits for the ongoing suspend to finish, causing a deadlock. Fix by not acquiring a runtime PM ref if nouveau_connector_detect() is called in the output poll worker's context. This is safe because the poll worker is only enabled while runtime active and we know that ->runtime_suspend waits for it to finish. Other contexts calling nouveau_connector_detect() do require a runtime PM ref, these comprise: status_store() drm sysfs interface ->fill_modes drm callback drm_fb_helper_probe_connector_modes() drm_mode_getconnector() nouveau_connector_hotplug() nouveau_display_hpd_work() nv17_tv_set_property() Stack trace for posterity: INFO: task kworker/0:1:58 blocked for more than 120 seconds. Workqueue: events output_poll_execute [drm_kms_helper] Call Trace: schedule+0x28/0x80 rpm_resume+0x107/0x6e0 __pm_runtime_resume+0x47/0x70 nouveau_connector_detect+0x7e/0x4a0 [nouveau] nouveau_connector_detect_lvds+0x132/0x180 [nouveau] drm_helper_probe_detect_ctx+0x85/0xd0 [drm_kms_helper] output_poll_execute+0x11e/0x1c0 [drm_kms_helper] process_one_work+0x184/0x380 worker_thread+0x2e/0x390 INFO: task kworker/0:2:252 blocked for more than 120 seconds. Workqueue: pm pm_runtime_work Call Trace: schedule+0x28/0x80 schedule_timeout+0x1e3/0x370 wait_for_completion+0x123/0x190 flush_work+0x142/0x1c0 nouveau_pmops_runtime_suspend+0x7e/0xd0 [nouveau] pci_pm_runtime_suspend+0x5c/0x180 vga_switcheroo_runtime_suspend+0x1e/0xa0 __rpm_callback+0xc1/0x200 rpm_callback+0x1f/0x70 rpm_suspend+0x13c/0x640 pm_runtime_work+0x6e/0x90 process_one_work+0x184/0x380 worker_thread+0x2e/0x390 Bugzilla: https://bugs.archlinux.org/task/53497 Bugzilla: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=870523 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70388#c33 Fixes: 5addcf0a5f0f ("nouveau: add runtime PM support (v0.9)") Cc: stable@vger.kernel.org # v3.12+: 27d4ee03078a: workqueue: Allow retrieval of current task's work struct Cc: stable@vger.kernel.org # v3.12+: 25c058ccaf2e: drm: Allow determining if current task is output poll worker Cc: Ben Skeggs Cc: Dave Airlie Reviewed-by: Lyude Paul Signed-off-by: Lukas Wunner Link: https://patchwork.freedesktop.org/patch/msgid/b7d2cbb609a80f59ccabfdf479b9d5907c603ea1.1518338789.git.lukas@wunner.de --- drivers/gpu/drm/nouveau/nouveau_connector.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 69d6e61a01ec..6ed9cb053dfa 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -570,9 +570,15 @@ nouveau_connector_detect(struct drm_connector *connector, bool force) nv_connector->edid = NULL; } - ret = pm_runtime_get_sync(connector->dev->dev); - if (ret < 0 && ret != -EACCES) - return conn_status; + /* Outputs are only polled while runtime active, so acquiring a + * runtime PM ref here is unnecessary (and would deadlock upon + * runtime suspend because it waits for polling to finish). + */ + if (!drm_kms_helper_is_poll_worker()) { + ret = pm_runtime_get_sync(connector->dev->dev); + if (ret < 0 && ret != -EACCES) + return conn_status; + } nv_encoder = nouveau_connector_ddc_detect(connector); if (nv_encoder && (i2c = nv_encoder->i2c) != NULL) { @@ -647,8 +653,10 @@ detect_analog: out: - pm_runtime_mark_last_busy(connector->dev->dev); - pm_runtime_put_autosuspend(connector->dev->dev); + if (!drm_kms_helper_is_poll_worker()) { + pm_runtime_mark_last_busy(connector->dev->dev); + pm_runtime_put_autosuspend(connector->dev->dev); + } return conn_status; } -- cgit v1.2.3 From 15734feff2bdac24aa3266c437cffa42851990e3 Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Sun, 11 Feb 2018 10:38:28 +0100 Subject: drm/radeon: Fix deadlock on runtime suspend radeon's ->runtime_suspend hook calls drm_kms_helper_poll_disable(), which waits for the output poll worker to finish if it's running. The output poll worker meanwhile calls pm_runtime_get_sync() in radeon's ->detect hooks, which waits for the ongoing suspend to finish, causing a deadlock. Fix by not acquiring a runtime PM ref if the ->detect hooks are called in the output poll worker's context. This is safe because the poll worker is only enabled while runtime active and we know that ->runtime_suspend waits for it to finish. Stack trace for posterity: INFO: task kworker/0:3:31847 blocked for more than 120 seconds Workqueue: events output_poll_execute [drm_kms_helper] Call Trace: schedule+0x3c/0x90 rpm_resume+0x1e2/0x690 __pm_runtime_resume+0x3f/0x60 radeon_lvds_detect+0x39/0xf0 [radeon] output_poll_execute+0xda/0x1e0 [drm_kms_helper] process_one_work+0x14b/0x440 worker_thread+0x48/0x4a0 INFO: task kworker/2:0:10493 blocked for more than 120 seconds. Workqueue: pm pm_runtime_work Call Trace: schedule+0x3c/0x90 schedule_timeout+0x1b3/0x240 wait_for_common+0xc2/0x180 wait_for_completion+0x1d/0x20 flush_work+0xfc/0x1a0 __cancel_work_timer+0xa5/0x1d0 cancel_delayed_work_sync+0x13/0x20 drm_kms_helper_poll_disable+0x1f/0x30 [drm_kms_helper] radeon_pmops_runtime_suspend+0x3d/0xa0 [radeon] pci_pm_runtime_suspend+0x61/0x1a0 vga_switcheroo_runtime_suspend+0x21/0x70 __rpm_callback+0x32/0x70 rpm_callback+0x24/0x80 rpm_suspend+0x12b/0x640 pm_runtime_work+0x6f/0xb0 process_one_work+0x14b/0x440 worker_thread+0x48/0x4a0 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94147 Fixes: 10ebc0bc0934 ("drm/radeon: add runtime PM support (v2)") Cc: stable@vger.kernel.org # v3.13+: 27d4ee03078a: workqueue: Allow retrieval of current task's work struct Cc: stable@vger.kernel.org # v3.13+: 25c058ccaf2e: drm: Allow determining if current task is output poll worker Cc: Ismo Toijala Cc: Alex Deucher Cc: Dave Airlie Reviewed-by: Lyude Paul Signed-off-by: Lukas Wunner Link: https://patchwork.freedesktop.org/patch/msgid/64ea02c44f91dda19bc563902b97bbc699040392.1518338789.git.lukas@wunner.de --- drivers/gpu/drm/radeon/radeon_connectors.c | 74 ++++++++++++++++++++---------- 1 file changed, 49 insertions(+), 25 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 59dcefb2df3b..30e129684c7c 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -900,9 +900,11 @@ radeon_lvds_detect(struct drm_connector *connector, bool force) enum drm_connector_status ret = connector_status_disconnected; int r; - r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) - return connector_status_disconnected; + if (!drm_kms_helper_is_poll_worker()) { + r = pm_runtime_get_sync(connector->dev->dev); + if (r < 0) + return connector_status_disconnected; + } if (encoder) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); @@ -925,8 +927,12 @@ radeon_lvds_detect(struct drm_connector *connector, bool force) /* check acpi lid status ??? */ radeon_connector_update_scratch_regs(connector, ret); - pm_runtime_mark_last_busy(connector->dev->dev); - pm_runtime_put_autosuspend(connector->dev->dev); + + if (!drm_kms_helper_is_poll_worker()) { + pm_runtime_mark_last_busy(connector->dev->dev); + pm_runtime_put_autosuspend(connector->dev->dev); + } + return ret; } @@ -1040,9 +1046,11 @@ radeon_vga_detect(struct drm_connector *connector, bool force) enum drm_connector_status ret = connector_status_disconnected; int r; - r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) - return connector_status_disconnected; + if (!drm_kms_helper_is_poll_worker()) { + r = pm_runtime_get_sync(connector->dev->dev); + if (r < 0) + return connector_status_disconnected; + } encoder = radeon_best_single_encoder(connector); if (!encoder) @@ -1109,8 +1117,10 @@ radeon_vga_detect(struct drm_connector *connector, bool force) radeon_connector_update_scratch_regs(connector, ret); out: - pm_runtime_mark_last_busy(connector->dev->dev); - pm_runtime_put_autosuspend(connector->dev->dev); + if (!drm_kms_helper_is_poll_worker()) { + pm_runtime_mark_last_busy(connector->dev->dev); + pm_runtime_put_autosuspend(connector->dev->dev); + } return ret; } @@ -1174,9 +1184,11 @@ radeon_tv_detect(struct drm_connector *connector, bool force) if (!radeon_connector->dac_load_detect) return ret; - r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) - return connector_status_disconnected; + if (!drm_kms_helper_is_poll_worker()) { + r = pm_runtime_get_sync(connector->dev->dev); + if (r < 0) + return connector_status_disconnected; + } encoder = radeon_best_single_encoder(connector); if (!encoder) @@ -1188,8 +1200,12 @@ radeon_tv_detect(struct drm_connector *connector, bool force) if (ret == connector_status_connected) ret = radeon_connector_analog_encoder_conflict_solve(connector, encoder, ret, false); radeon_connector_update_scratch_regs(connector, ret); - pm_runtime_mark_last_busy(connector->dev->dev); - pm_runtime_put_autosuspend(connector->dev->dev); + + if (!drm_kms_helper_is_poll_worker()) { + pm_runtime_mark_last_busy(connector->dev->dev); + pm_runtime_put_autosuspend(connector->dev->dev); + } + return ret; } @@ -1252,9 +1268,11 @@ radeon_dvi_detect(struct drm_connector *connector, bool force) enum drm_connector_status ret = connector_status_disconnected; bool dret = false, broken_edid = false; - r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) - return connector_status_disconnected; + if (!drm_kms_helper_is_poll_worker()) { + r = pm_runtime_get_sync(connector->dev->dev); + if (r < 0) + return connector_status_disconnected; + } if (radeon_connector->detected_hpd_without_ddc) { force = true; @@ -1437,8 +1455,10 @@ out: } exit: - pm_runtime_mark_last_busy(connector->dev->dev); - pm_runtime_put_autosuspend(connector->dev->dev); + if (!drm_kms_helper_is_poll_worker()) { + pm_runtime_mark_last_busy(connector->dev->dev); + pm_runtime_put_autosuspend(connector->dev->dev); + } return ret; } @@ -1689,9 +1709,11 @@ radeon_dp_detect(struct drm_connector *connector, bool force) if (radeon_dig_connector->is_mst) return connector_status_disconnected; - r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) - return connector_status_disconnected; + if (!drm_kms_helper_is_poll_worker()) { + r = pm_runtime_get_sync(connector->dev->dev); + if (r < 0) + return connector_status_disconnected; + } if (!force && radeon_check_hpd_status_unchanged(connector)) { ret = connector->status; @@ -1778,8 +1800,10 @@ radeon_dp_detect(struct drm_connector *connector, bool force) } out: - pm_runtime_mark_last_busy(connector->dev->dev); - pm_runtime_put_autosuspend(connector->dev->dev); + if (!drm_kms_helper_is_poll_worker()) { + pm_runtime_mark_last_busy(connector->dev->dev); + pm_runtime_put_autosuspend(connector->dev->dev); + } return ret; } -- cgit v1.2.3 From aa0aad57909eb321746325951d66af88a83bc956 Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Sun, 11 Feb 2018 10:38:28 +0100 Subject: drm/amdgpu: Fix deadlock on runtime suspend amdgpu's ->runtime_suspend hook calls drm_kms_helper_poll_disable(), which waits for the output poll worker to finish if it's running. The output poll worker meanwhile calls pm_runtime_get_sync() in amdgpu's ->detect hooks, which waits for the ongoing suspend to finish, causing a deadlock. Fix by not acquiring a runtime PM ref if the ->detect hooks are called in the output poll worker's context. This is safe because the poll worker is only enabled while runtime active and we know that ->runtime_suspend waits for it to finish. Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)") Cc: stable@vger.kernel.org # v4.2+: 27d4ee03078a: workqueue: Allow retrieval of current task's work struct Cc: stable@vger.kernel.org # v4.2+: 25c058ccaf2e: drm: Allow determining if current task is output poll worker Cc: Alex Deucher Tested-by: Mike Lothian Reviewed-by: Lyude Paul Signed-off-by: Lukas Wunner Link: https://patchwork.freedesktop.org/patch/msgid/4c9bf72aacae1eef062bd134cd112e0770a7f121.1518338789.git.lukas@wunner.de --- drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 58 +++++++++++++++++--------- 1 file changed, 38 insertions(+), 20 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c index df9cbc78e168..21e7ae159dff 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c @@ -737,9 +737,11 @@ amdgpu_connector_lvds_detect(struct drm_connector *connector, bool force) enum drm_connector_status ret = connector_status_disconnected; int r; - r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) - return connector_status_disconnected; + if (!drm_kms_helper_is_poll_worker()) { + r = pm_runtime_get_sync(connector->dev->dev); + if (r < 0) + return connector_status_disconnected; + } if (encoder) { struct amdgpu_encoder *amdgpu_encoder = to_amdgpu_encoder(encoder); @@ -758,8 +760,12 @@ amdgpu_connector_lvds_detect(struct drm_connector *connector, bool force) /* check acpi lid status ??? */ amdgpu_connector_update_scratch_regs(connector, ret); - pm_runtime_mark_last_busy(connector->dev->dev); - pm_runtime_put_autosuspend(connector->dev->dev); + + if (!drm_kms_helper_is_poll_worker()) { + pm_runtime_mark_last_busy(connector->dev->dev); + pm_runtime_put_autosuspend(connector->dev->dev); + } + return ret; } @@ -869,9 +875,11 @@ amdgpu_connector_vga_detect(struct drm_connector *connector, bool force) enum drm_connector_status ret = connector_status_disconnected; int r; - r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) - return connector_status_disconnected; + if (!drm_kms_helper_is_poll_worker()) { + r = pm_runtime_get_sync(connector->dev->dev); + if (r < 0) + return connector_status_disconnected; + } encoder = amdgpu_connector_best_single_encoder(connector); if (!encoder) @@ -925,8 +933,10 @@ amdgpu_connector_vga_detect(struct drm_connector *connector, bool force) amdgpu_connector_update_scratch_regs(connector, ret); out: - pm_runtime_mark_last_busy(connector->dev->dev); - pm_runtime_put_autosuspend(connector->dev->dev); + if (!drm_kms_helper_is_poll_worker()) { + pm_runtime_mark_last_busy(connector->dev->dev); + pm_runtime_put_autosuspend(connector->dev->dev); + } return ret; } @@ -989,9 +999,11 @@ amdgpu_connector_dvi_detect(struct drm_connector *connector, bool force) enum drm_connector_status ret = connector_status_disconnected; bool dret = false, broken_edid = false; - r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) - return connector_status_disconnected; + if (!drm_kms_helper_is_poll_worker()) { + r = pm_runtime_get_sync(connector->dev->dev); + if (r < 0) + return connector_status_disconnected; + } if (!force && amdgpu_connector_check_hpd_status_unchanged(connector)) { ret = connector->status; @@ -1116,8 +1128,10 @@ out: amdgpu_connector_update_scratch_regs(connector, ret); exit: - pm_runtime_mark_last_busy(connector->dev->dev); - pm_runtime_put_autosuspend(connector->dev->dev); + if (!drm_kms_helper_is_poll_worker()) { + pm_runtime_mark_last_busy(connector->dev->dev); + pm_runtime_put_autosuspend(connector->dev->dev); + } return ret; } @@ -1360,9 +1374,11 @@ amdgpu_connector_dp_detect(struct drm_connector *connector, bool force) struct drm_encoder *encoder = amdgpu_connector_best_single_encoder(connector); int r; - r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) - return connector_status_disconnected; + if (!drm_kms_helper_is_poll_worker()) { + r = pm_runtime_get_sync(connector->dev->dev); + if (r < 0) + return connector_status_disconnected; + } if (!force && amdgpu_connector_check_hpd_status_unchanged(connector)) { ret = connector->status; @@ -1430,8 +1446,10 @@ amdgpu_connector_dp_detect(struct drm_connector *connector, bool force) amdgpu_connector_update_scratch_regs(connector, ret); out: - pm_runtime_mark_last_busy(connector->dev->dev); - pm_runtime_put_autosuspend(connector->dev->dev); + if (!drm_kms_helper_is_poll_worker()) { + pm_runtime_mark_last_busy(connector->dev->dev); + pm_runtime_put_autosuspend(connector->dev->dev); + } return ret; } -- cgit v1.2.3 From 06998a756a3865817b87a129a7e5d5bb66dc1ec3 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Sun, 18 Feb 2018 16:53:59 +0800 Subject: drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA Similar to commit e10aec652f31 ("drm/edid: Add 6 bpc quirk for display AEO model 0."), the EDID reports "DFP 1.x compliant TMDS" but it support 6bpc instead of 8 bpc. Hence, use 6 bpc quirk for this panel. Fixes: 196f954e2509 ("drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown"") BugLink: https://bugs.launchpad.net/bugs/1749420 Signed-off-by: Kai-Heng Feng Reviewed-by: Mario Kleiner Cc: # v4.8+ Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20180218085359.7817-1-kai.heng.feng@canonical.com --- drivers/gpu/drm/drm_edid.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index cb487148359a..16fb76ba6509 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -113,6 +113,9 @@ static const struct edid_quirk { /* AEO model 0 reports 8 bpc, but is a 6 bpc panel */ { "AEO", 0, EDID_QUIRK_FORCE_6BPC }, + /* CPT panel of Asus UX303LA reports 8 bpc, but is a 6 bpc panel */ + { "CPT", 0x17df, EDID_QUIRK_FORCE_6BPC }, + /* Belinea 10 15 55 */ { "MAX", 1516, EDID_QUIRK_PREFER_LARGE_60 }, { "MAX", 0x77e, EDID_QUIRK_PREFER_LARGE_60 }, -- cgit v1.2.3 From a588a8bb7b25a3fb4f7fed00feb7aec541fc2632 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 17 Jan 2018 18:01:21 +0100 Subject: drm/exynos: g2d: use monotonic timestamps The exynos DRM driver uses real-time 'struct timeval' values for exporting its timestamps to user space. This has multiple problems: 1. signed seconds overflow in y2038 2. the 'struct timeval' definition is deprecated in the kernel 3. time may jump or go backwards after a 'settimeofday()' syscall 4. other DRM timestamps are in CLOCK_MONOTONIC domain, so they can't be compared 5. exporting microseconds requires a division by 1000, which may be slow on some architectures. The code existed in two places before, but the IPP portion was removed in 8ded59413ccc ("drm/exynos: ipp: Remove Exynos DRM IPP subsystem"), so we no longer need to worry about it. Ideally timestamps should just use 64-bit nanoseconds instead, but of course we can't change that now. Instead, this tries to address the first four points above by using monotonic 'timespec' values. According to Tobias Jakobi, user space doesn't care about the timestamp at the moment, so we can change the format. Even if there is something looking at them, it will work just fine with monotonic times as long as the application only looks at the relative values between two events. Link: https://patchwork.kernel.org/patch/10038593/ Cc: Tobias Jakobi Signed-off-by: Arnd Bergmann Reviewed-by: Tobias Jakobi Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_g2d.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index 2b8bf2dd6387..9effe40f5fa5 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -926,7 +926,7 @@ static void g2d_finish_event(struct g2d_data *g2d, u32 cmdlist_no) struct drm_device *drm_dev = g2d->subdrv.drm_dev; struct g2d_runqueue_node *runqueue_node = g2d->runqueue_node; struct drm_exynos_pending_g2d_event *e; - struct timeval now; + struct timespec64 now; if (list_empty(&runqueue_node->event_list)) return; @@ -934,9 +934,9 @@ static void g2d_finish_event(struct g2d_data *g2d, u32 cmdlist_no) e = list_first_entry(&runqueue_node->event_list, struct drm_exynos_pending_g2d_event, base.link); - do_gettimeofday(&now); + ktime_get_ts64(&now); e->event.tv_sec = now.tv_sec; - e->event.tv_usec = now.tv_usec; + e->event.tv_usec = now.tv_nsec / NSEC_PER_USEC; e->event.cmdlist_no = cmdlist_no; drm_send_event(drm_dev, &e->base); -- cgit v1.2.3 From 1293b6191010672c0c9dacae8f71c6f3e4d70cbe Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 5 Feb 2018 21:09:59 +0100 Subject: drm/exynos: fix comparison to bitshift when dealing with a mask Due to a typo, the mask was destroyed by a comparison instead of a bit shift. Signed-off-by: Wolfram Sang Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/regs-fimc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/exynos/regs-fimc.h b/drivers/gpu/drm/exynos/regs-fimc.h index 30496134a3d0..d7cbe53c4c01 100644 --- a/drivers/gpu/drm/exynos/regs-fimc.h +++ b/drivers/gpu/drm/exynos/regs-fimc.h @@ -569,7 +569,7 @@ #define EXYNOS_CIIMGEFF_FIN_EMBOSSING (4 << 26) #define EXYNOS_CIIMGEFF_FIN_SILHOUETTE (5 << 26) #define EXYNOS_CIIMGEFF_FIN_MASK (7 << 26) -#define EXYNOS_CIIMGEFF_PAT_CBCR_MASK ((0xff < 13) | (0xff < 0)) +#define EXYNOS_CIIMGEFF_PAT_CBCR_MASK ((0xff << 13) | (0xff << 0)) /* Real input DMA size register */ #define EXYNOS_CIREAL_ISIZE_AUTOLOAD_ENABLE (1 << 31) -- cgit v1.2.3 From 6f0a60298bbbea43ab5e3955913ab19c153076f3 Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Thu, 8 Feb 2018 18:42:51 +0100 Subject: drm/exynos: g2d: Delete an error message for a failed memory allocation in two functions Omit an extra message for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_g2d.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index 9effe40f5fa5..f68ef1b3a28c 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -286,7 +286,6 @@ static int g2d_init_cmdlist(struct g2d_data *g2d) node = kcalloc(G2D_CMDLIST_NUM, sizeof(*node), GFP_KERNEL); if (!node) { - dev_err(dev, "failed to allocate memory\n"); ret = -ENOMEM; goto err; } @@ -1358,10 +1357,9 @@ int exynos_g2d_exec_ioctl(struct drm_device *drm_dev, void *data, return -EFAULT; runqueue_node = kmem_cache_alloc(g2d->runqueue_slab, GFP_KERNEL); - if (!runqueue_node) { - dev_err(dev, "failed to allocate memory\n"); + if (!runqueue_node) return -ENOMEM; - } + run_cmdlist = &runqueue_node->run_cmdlist; event_list = &runqueue_node->event_list; INIT_LIST_HEAD(run_cmdlist); -- cgit v1.2.3 From b701a1436a5b177dc2240ba7e8f2ff7106bc8d84 Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Thu, 15 Feb 2018 08:23:15 +0000 Subject: drm/exynos: remove exynos_drm_rotator.h Since its inclusion in 2012 via commit bea8a429d91a ("drm/exynos: add rotator ipp driver") this header is not used by any source files and is empty. Lets just remove it. Signed-off-by: Corentin Labbe Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_rotator.h | 19 ------------------- 1 file changed, 19 deletions(-) delete mode 100644 drivers/gpu/drm/exynos/exynos_drm_rotator.h (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.h b/drivers/gpu/drm/exynos/exynos_drm_rotator.h deleted file mode 100644 index 71a0b4c0c1e8..000000000000 --- a/drivers/gpu/drm/exynos/exynos_drm_rotator.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * - * Authors: - * YoungJun Cho - * Eunchul Kim - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef _EXYNOS_DRM_ROTATOR_H_ -#define _EXYNOS_DRM_ROTATOR_H_ - -/* TODO */ - -#endif -- cgit v1.2.3 From c84b66f8aa3f879dbf41353f677d87875f5fc6c9 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 14 Feb 2018 18:23:56 +0100 Subject: drm: exynos: Use proper macro definition for HDMI_I2S_PIN_SEL_1 Bit field [2:0] of HDMI_I2S_PIN_SEL_1 corresponds to SDATA_0, not SDATA_2. This patch removes redefinition of HDMI_I2S_SEL_DATA2 constant and adds missing HDMI_I2S_SEL_DATA0. The value of bit field selecting SDATA_1 (pin_sel_3) is also changed, so it is 3 as suggested in the Exynos TRMs. Signed-off-by: Sylwester Nawrocki Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_hdmi.c | 7 +++++-- drivers/gpu/drm/exynos/regs-hdmi.h | 2 +- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index a4b75a46f946..abd84cbcf1c2 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1068,10 +1068,13 @@ static void hdmi_audio_config(struct hdmi_context *hdata) /* Configuration I2S input ports. Configure I2S_PIN_SEL_0~4 */ hdmi_reg_writeb(hdata, HDMI_I2S_PIN_SEL_0, HDMI_I2S_SEL_SCLK(5) | HDMI_I2S_SEL_LRCK(6)); - hdmi_reg_writeb(hdata, HDMI_I2S_PIN_SEL_1, HDMI_I2S_SEL_SDATA1(1) - | HDMI_I2S_SEL_SDATA2(4)); + + hdmi_reg_writeb(hdata, HDMI_I2S_PIN_SEL_1, HDMI_I2S_SEL_SDATA1(3) + | HDMI_I2S_SEL_SDATA0(4)); + hdmi_reg_writeb(hdata, HDMI_I2S_PIN_SEL_2, HDMI_I2S_SEL_SDATA3(1) | HDMI_I2S_SEL_SDATA2(2)); + hdmi_reg_writeb(hdata, HDMI_I2S_PIN_SEL_3, HDMI_I2S_SEL_DSD(0)); /* I2S_CON_1 & 2 */ diff --git a/drivers/gpu/drm/exynos/regs-hdmi.h b/drivers/gpu/drm/exynos/regs-hdmi.h index 04be0f7e8193..4420c203ac85 100644 --- a/drivers/gpu/drm/exynos/regs-hdmi.h +++ b/drivers/gpu/drm/exynos/regs-hdmi.h @@ -464,7 +464,7 @@ /* I2S_PIN_SEL_1 */ #define HDMI_I2S_SEL_SDATA1(x) (((x) & 0x7) << 4) -#define HDMI_I2S_SEL_SDATA2(x) ((x) & 0x7) +#define HDMI_I2S_SEL_SDATA0(x) ((x) & 0x7) /* I2S_PIN_SEL_2 */ #define HDMI_I2S_SEL_SDATA3(x) (((x) & 0x7) << 4) -- cgit v1.2.3 From b8ff1802815913aad52695898cccbc9f77b7e726 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 19 Feb 2018 11:35:43 +0000 Subject: drm: Handle unexpected holes in color-eviction During eviction, the driver may free more than one hole in the drm_mm due to the side-effects in evicting the scanned nodes. However, drm_mm_scan_color_evict() expects that the scan result is the first available hole (in the mru freed hole_stack list): kernel BUG at drivers/gpu/drm/drm_mm.c:844! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: i915 snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core lpc_ich snd_pcm e1000e mei_me prime_numbers mei CPU: 1 PID: 1490 Comm: gem_userptr_bli Tainted: G U 4.16.0-rc1-g740f57c54ecf-kasan_6+ #1 Hardware name: Dell Inc. OptiPlex 755 /0PU052, BIOS A08 02/19/2008 RIP: 0010:drm_mm_scan_color_evict+0x2b8/0x3d0 RSP: 0018:ffff880057a573f8 EFLAGS: 00010287 RAX: ffff8800611f5980 RBX: ffff880057a575d0 RCX: dffffc0000000000 RDX: 00000000029d5000 RSI: 1ffff1000af4aec1 RDI: ffff8800611f5a10 RBP: ffff88005ab884d0 R08: ffff880057a57600 R09: 000000000afff000 R10: 1ffff1000b5710b5 R11: 0000000000001000 R12: 1ffff1000af4ae82 R13: ffff8800611f59b0 R14: ffff8800611f5980 R15: ffff880057a57608 FS: 00007f2de0c2e8c0(0000) GS:ffff88006ac40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2ddde1e000 CR3: 00000000609b2000 CR4: 00000000000006e0 Call Trace: ? drm_mm_scan_remove_block+0x330/0x330 ? drm_mm_scan_remove_block+0x151/0x330 i915_gem_evict_something+0x711/0xbd0 [i915] ? igt_evict_contexts+0x50/0x50 [i915] ? nop_clear_range+0x10/0x10 [i915] ? igt_evict_something+0x90/0x90 [i915] ? i915_gem_gtt_reserve+0x1a1/0x320 [i915] i915_gem_gtt_insert+0x237/0x400 [i915] __i915_vma_do_pin+0xc25/0x1a20 [i915] eb_lookup_vmas+0x1c63/0x3790 [i915] ? i915_gem_check_execbuffer+0x250/0x250 [i915] ? trace_hardirqs_on_caller+0x33f/0x590 ? _raw_spin_unlock_irqrestore+0x39/0x60 ? __pm_runtime_resume+0x7d/0xf0 i915_gem_do_execbuffer+0x86a/0x2ff0 [i915] ? __kmalloc+0x132/0x340 ? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915] ? drm_ioctl_kernel+0x12e/0x1c0 ? drm_ioctl+0x662/0x980 ? eb_relocate_slow+0xa90/0xa90 [i915] ? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915] ? __might_fault+0xea/0x1a0 i915_gem_execbuffer2_ioctl+0x3cc/0x760 [i915] ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] ? lock_acquire+0x3c0/0x3c0 ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] drm_ioctl_kernel+0x12e/0x1c0 drm_ioctl+0x662/0x980 ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] ? drm_getstats+0x20/0x20 ? debug_check_no_obj_freed+0x2a6/0x8c0 do_vfs_ioctl+0x170/0xe70 ? ioctl_preallocate+0x170/0x170 ? task_work_run+0xbe/0x160 ? lock_acquire+0x3c0/0x3c0 ? trace_hardirqs_on_caller+0x33f/0x590 ? _raw_spin_unlock_irq+0x2f/0x50 SyS_ioctl+0x36/0x70 ? do_vfs_ioctl+0xe70/0xe70 do_syscall_64+0x18c/0x5d0 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x7f2ddf13b587 RSP: 002b:00007fff15c4f9d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f2ddf13b587 RDX: 00007fff15c4fa20 RSI: 0000000040406469 RDI: 0000000000000003 RBP: 00007fff15c4fa20 R08: 0000000000000000 R09: 00007f2ddf3fe120 R10: 0000000000000073 R11: 0000000000000246 R12: 0000000040406469 R13: 0000000000000003 R14: 00007fff15c4fa20 R15: 00000000000000c7 Code: 00 00 00 4a c7 44 22 08 00 00 00 00 42 c7 44 22 10 00 00 00 00 48 81 c4 b8 00 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 0f 0b 0f 0b <0f> 0b 31 c0 eb c0 4c 89 ef e8 9a 09 41 ff e9 1e fe ff ff 4c 89 RIP: drm_mm_scan_color_evict+0x2b8/0x3d0 RSP: ffff880057a573f8 We can trivially relax this assumption by searching the hole_stack for the scan result and warn instead if the driver called us without any result. Fixes: 3fa489dabea9 ("drm: Apply tight eviction scanning to color_adjust") Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: # v4.11+ Reviewed-by: Joonas Lahtinen Reviewed-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20180219113543.8010-1-chris@chris-wilson.co.uk --- drivers/gpu/drm/drm_mm.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c index c3c79ee6119e..edab571dbc90 100644 --- a/drivers/gpu/drm/drm_mm.c +++ b/drivers/gpu/drm/drm_mm.c @@ -836,9 +836,24 @@ struct drm_mm_node *drm_mm_scan_color_evict(struct drm_mm_scan *scan) if (!mm->color_adjust) return NULL; - hole = list_first_entry(&mm->hole_stack, typeof(*hole), hole_stack); - hole_start = __drm_mm_hole_node_start(hole); - hole_end = hole_start + hole->hole_size; + /* + * The hole found during scanning should ideally be the first element + * in the hole_stack list, but due to side-effects in the driver it + * may not be. + */ + list_for_each_entry(hole, &mm->hole_stack, hole_stack) { + hole_start = __drm_mm_hole_node_start(hole); + hole_end = hole_start + hole->hole_size; + + if (hole_start <= scan->hit_start && + hole_end >= scan->hit_end) + break; + } + + /* We should only be called after we found the hole previously */ + DRM_MM_BUG_ON(&hole->hole_stack == &mm->hole_stack); + if (unlikely(&hole->hole_stack == &mm->hole_stack)) + return NULL; DRM_MM_BUG_ON(hole_start > scan->hit_start); DRM_MM_BUG_ON(hole_end < scan->hit_end); -- cgit v1.2.3 From e88230a3744a71a0b5ecfb45e08ddfe1c884e50d Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 15 Feb 2018 11:19:36 +0100 Subject: drm/meson: fix vsync buffer update The plane buffer address/stride/height was incorrectly updated in the plane_atomic_update operation instead of the vsync irq. This patch delays this operation in the vsync irq along with the other plane delayed setup. This issue was masked using legacy framebuffer and X11 modesetting, but is clearly visible using gbm rendering when buffer is submitted late after vblank, like using software decoding and OpenGL rendering in Kodi. With this patch, tearing and other artifacts disappears completely. Cc: Michal Lazo Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Neil Armstrong Acked-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/1518689976-23292-1-git-send-email-narmstrong@baylibre.com --- drivers/gpu/drm/meson/meson_crtc.c | 6 ++++++ drivers/gpu/drm/meson/meson_drv.h | 3 +++ drivers/gpu/drm/meson/meson_plane.c | 7 +++---- 3 files changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/meson/meson_crtc.c b/drivers/gpu/drm/meson/meson_crtc.c index 5155f0179b61..05520202c967 100644 --- a/drivers/gpu/drm/meson/meson_crtc.c +++ b/drivers/gpu/drm/meson/meson_crtc.c @@ -36,6 +36,7 @@ #include "meson_venc.h" #include "meson_vpp.h" #include "meson_viu.h" +#include "meson_canvas.h" #include "meson_registers.h" /* CRTC definition */ @@ -192,6 +193,11 @@ void meson_crtc_irq(struct meson_drm *priv) } else meson_vpp_disable_interlace_vscaler_osd1(priv); + meson_canvas_setup(priv, MESON_CANVAS_ID_OSD1, + priv->viu.osd1_addr, priv->viu.osd1_stride, + priv->viu.osd1_height, MESON_CANVAS_WRAP_NONE, + MESON_CANVAS_BLKMODE_LINEAR); + /* Enable OSD1 */ writel_bits_relaxed(VPP_OSD1_POSTBLEND, VPP_OSD1_POSTBLEND, priv->io_base + _REG(VPP_MISC)); diff --git a/drivers/gpu/drm/meson/meson_drv.h b/drivers/gpu/drm/meson/meson_drv.h index 5e8b392b9d1f..8450d6ac8c9b 100644 --- a/drivers/gpu/drm/meson/meson_drv.h +++ b/drivers/gpu/drm/meson/meson_drv.h @@ -43,6 +43,9 @@ struct meson_drm { bool osd1_commit; uint32_t osd1_ctrl_stat; uint32_t osd1_blk0_cfg[5]; + uint32_t osd1_addr; + uint32_t osd1_stride; + uint32_t osd1_height; } viu; struct { diff --git a/drivers/gpu/drm/meson/meson_plane.c b/drivers/gpu/drm/meson/meson_plane.c index 17e96fa47868..0b6011b8d632 100644 --- a/drivers/gpu/drm/meson/meson_plane.c +++ b/drivers/gpu/drm/meson/meson_plane.c @@ -164,10 +164,9 @@ static void meson_plane_atomic_update(struct drm_plane *plane, /* Update Canvas with buffer address */ gem = drm_fb_cma_get_gem_obj(fb, 0); - meson_canvas_setup(priv, MESON_CANVAS_ID_OSD1, - gem->paddr, fb->pitches[0], - fb->height, MESON_CANVAS_WRAP_NONE, - MESON_CANVAS_BLKMODE_LINEAR); + priv->viu.osd1_addr = gem->paddr; + priv->viu.osd1_stride = fb->pitches[0]; + priv->viu.osd1_height = fb->height; spin_unlock_irqrestore(&priv->drm->event_lock, flags); } -- cgit v1.2.3 From 5825acf5c958a6820b04e9811caeb2f5e572bcd8 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 13 Feb 2018 14:25:11 -0500 Subject: drm/amd/powerplay/vega10: allow mclk switching with no displays If there are no displays attached, there is no reason to disable mclk switching. Fixes mclks getting set to high when there are no displays attached. Reviewed-by: Eric Huang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c index 2d55dabc77d4..5f9c3efb532f 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c @@ -3168,10 +3168,13 @@ static int vega10_apply_state_adjust_rules(struct pp_hwmgr *hwmgr, disable_mclk_switching_for_vr = PP_CAP(PHM_PlatformCaps_DisableMclkSwitchForVR); force_mclk_high = PP_CAP(PHM_PlatformCaps_ForceMclkHigh); - disable_mclk_switching = (info.display_count > 1) || - disable_mclk_switching_for_frame_lock || - disable_mclk_switching_for_vr || - force_mclk_high; + if (info.display_count == 0) + disable_mclk_switching = false; + else + disable_mclk_switching = (info.display_count > 1) || + disable_mclk_switching_for_frame_lock || + disable_mclk_switching_for_vr || + force_mclk_high; sclk = vega10_ps->performance_levels[0].gfx_clock; mclk = vega10_ps->performance_levels[0].mem_clock; -- cgit v1.2.3 From 51954e17914aaadf18d97b21c2a2cee16fa29513 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 13 Feb 2018 14:26:54 -0500 Subject: drm/amd/powerplay/smu7: allow mclk switching with no displays If there are no displays attached, there is no reason to disable mclk switching. Fixes mclks getting set to high when there are no displays attached. Reviewed-by: Eric Huang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 41e42beff213..45be31327340 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -2756,10 +2756,13 @@ static int smu7_apply_state_adjust_rules(struct pp_hwmgr *hwmgr, PHM_PlatformCaps_DisableMclkSwitchingForFrameLock); - disable_mclk_switching = ((1 < info.display_count) || - disable_mclk_switching_for_frame_lock || - smu7_vblank_too_short(hwmgr, mode_info.vblank_time_us) || - (mode_info.refresh_rate > 120)); + if (info.display_count == 0) + disable_mclk_switching = false; + else + disable_mclk_switching = ((1 < info.display_count) || + disable_mclk_switching_for_frame_lock || + smu7_vblank_too_short(hwmgr, mode_info.vblank_time_us) || + (mode_info.refresh_rate > 120)); sclk = smu7_ps->performance_levels[0].engine_clock; mclk = smu7_ps->performance_levels[0].memory_clock; -- cgit v1.2.3 From 53bf277b487eb5ae6695db01bede0fe406792119 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Feb 2018 08:40:30 -0500 Subject: Revert "drm/radeon/pm: autoswitch power state when in balanced mode" This reverts commit 1c331f75aa6ccbf64ebcc5a019183e617c9d818a. Breaks resume on some systems. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=100759 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_pm.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index 326ad068c15a..4b6542538ff9 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -47,7 +47,6 @@ static bool radeon_pm_in_vbl(struct radeon_device *rdev); static bool radeon_pm_debug_check_in_vbl(struct radeon_device *rdev, bool finish); static void radeon_pm_update_profile(struct radeon_device *rdev); static void radeon_pm_set_clocks(struct radeon_device *rdev); -static void radeon_pm_compute_clocks_dpm(struct radeon_device *rdev); int radeon_pm_get_type_index(struct radeon_device *rdev, enum radeon_pm_state_type ps_type, @@ -80,8 +79,6 @@ void radeon_pm_acpi_event_handler(struct radeon_device *rdev) radeon_dpm_enable_bapm(rdev, rdev->pm.dpm.ac_power); } mutex_unlock(&rdev->pm.mutex); - /* allow new DPM state to be picked */ - radeon_pm_compute_clocks_dpm(rdev); } else if (rdev->pm.pm_method == PM_METHOD_PROFILE) { if (rdev->pm.profile == PM_PROFILE_AUTO) { mutex_lock(&rdev->pm.mutex); @@ -885,8 +882,7 @@ static struct radeon_ps *radeon_dpm_pick_power_state(struct radeon_device *rdev, dpm_state = POWER_STATE_TYPE_INTERNAL_3DPERF; /* balanced states don't exist at the moment */ if (dpm_state == POWER_STATE_TYPE_BALANCED) - dpm_state = rdev->pm.dpm.ac_power ? - POWER_STATE_TYPE_PERFORMANCE : POWER_STATE_TYPE_BATTERY; + dpm_state = POWER_STATE_TYPE_PERFORMANCE; restart_search: /* Pick the best power state based on current conditions */ -- cgit v1.2.3 From 5893f6e8a87243c951ddcb0bb95842bd5aef4d8f Mon Sep 17 00:00:00 2001 From: Mikita Lipski Date: Fri, 19 Jan 2018 11:21:04 -0500 Subject: drm/amdgpu: Add a missing lock for drm_mm_takedown Inside amdgpu_gtt_mgr_fini add a missing lock to maintain locking balance Signed-off-by: Mikita Lipski Reviewed-by: Andrey Grodzovsky Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c index e14ab34d8262..7c2be32c5aea 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c @@ -75,7 +75,7 @@ static int amdgpu_gtt_mgr_init(struct ttm_mem_type_manager *man, static int amdgpu_gtt_mgr_fini(struct ttm_mem_type_manager *man) { struct amdgpu_gtt_mgr *mgr = man->priv; - + spin_lock(&mgr->lock); drm_mm_takedown(&mgr->mm); spin_unlock(&mgr->lock); kfree(mgr); -- cgit v1.2.3 From 09c381e0f34abaeff68ba5ac3d949928f32757c5 Mon Sep 17 00:00:00 2001 From: Mikita Lipski Date: Sat, 3 Feb 2018 15:19:20 -0500 Subject: drm/amdgpu: Unify the dm resume calls into one amdgpu_dm_display_resume is now called from dm_resume to unify DAL resume call into a single function call There is no more need to separately call 2 resume functions for DM. Initially they were separated to resume display state after cursor is pinned. But because there is no longer any corruption with the cursor - the calls can be merged into one function hook. Signed-off-by: Mikita Lipski Reviewed-by: Harry Wentland Reviewed-by: Andrey Grodzovsky Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 9 --------- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 +++- 2 files changed, 3 insertions(+), 10 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 00a50cc5ec9a..829dc2edace6 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2284,14 +2284,6 @@ int amdgpu_device_resume(struct drm_device *dev, bool resume, bool fbcon) drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON); } drm_modeset_unlock_all(dev); - } else { - /* - * There is no equivalent atomic helper to turn on - * display, so we defined our own function for this, - * once suspend resume is supported by the atomic - * framework this will be reworked - */ - amdgpu_dm_display_resume(adev); } } @@ -2726,7 +2718,6 @@ int amdgpu_device_gpu_recover(struct amdgpu_device *adev, if (amdgpu_device_has_dc_support(adev)) { if (drm_atomic_helper_resume(adev->ddev, state)) dev_info(adev->dev, "drm resume failed:%d\n", r); - amdgpu_dm_display_resume(adev); } else { drm_helper_resume_force_mode(adev->ddev); } diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 1ce4c98385e3..862835dc054e 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -629,11 +629,13 @@ static int dm_resume(void *handle) { struct amdgpu_device *adev = handle; struct amdgpu_display_manager *dm = &adev->dm; + int ret = 0; /* power on hardware */ dc_set_power_state(dm->dc, DC_ACPI_CM_POWER_STATE_D0); - return 0; + ret = amdgpu_dm_display_resume(adev); + return ret; } int amdgpu_dm_display_resume(struct amdgpu_device *adev) -- cgit v1.2.3 From 4909c6de7d7ada493e1c2f0d8bf0145a750d2dd6 Mon Sep 17 00:00:00 2001 From: Hersen Wu Date: Tue, 30 Jan 2018 11:46:16 -0500 Subject: drm/amd/display: VGA black screen from s3 when attached to hook [Description] For MST, DC already notify MST sink for MST mode, DC stll check DP SINK DPCD register to see if MST enabled. DP RX firmware may not handle this properly. Signed-off-by: Hersen Wu Reviewed-by: Tony Cheng Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c index 61e8c3e02d16..51f5a5757ff0 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c @@ -1465,7 +1465,7 @@ void decide_link_settings(struct dc_stream_state *stream, /* MST doesn't perform link training for now * TODO: add MST specific link training routine */ - if (is_mst_supported(link)) { + if (stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST) { *link_setting = link->verified_link_cap; return; } -- cgit v1.2.3 From b3b12ea3661958bc093e258b7c0dd0a13bdcc719 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 19 Feb 2018 18:59:36 +0100 Subject: drm/edid: quirk Oculus Rift headsets as non-desktop This uses the EDID info from Oculus Rift DK1 (OVR-0001), DK2 (OVR-0003), and CV1 (OVR-0004) to mark them as non-desktop. Signed-off-by: Philipp Zabel Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index ddd537914575..d6fa56bb6906 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -162,6 +162,11 @@ static const struct edid_quirk { /* HTC Vive VR Headset */ { "HVR", 0xaa01, EDID_QUIRK_NON_DESKTOP }, + + /* Oculus Rift DK1, DK2, and CV1 VR Headsets */ + { "OVR", 0x0001, EDID_QUIRK_NON_DESKTOP }, + { "OVR", 0x0003, EDID_QUIRK_NON_DESKTOP }, + { "OVR", 0x0004, EDID_QUIRK_NON_DESKTOP }, }; /* -- cgit v1.2.3 From 90eda8fc8016cfe39e2c73222e14665f0e5dabb1 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 19 Feb 2018 18:59:37 +0100 Subject: drm/edid: quirk Windows Mixed Reality headsets as non-desktop This uses the EDID info from Lenovo Explorer (LEN-b800), Acer AH100 (ACR-7fce), and Samsung Odyssey (SEC-144a) to mark them as non-desktop. The other entries are for the HP Windows Mixed Reality Headset (HPN-3515), the Fujitsu Windows Mixed Reality headset (FUJ-1970), the Dell Visor (DEL-7fce), and the ASUS HC102 (AUS-c102). They are not tested with real hardware, but listed as HMD monitors alongside the tested headsets in the Microsoft HololensSensors driver package. Signed-off-by: Philipp Zabel Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index d6fa56bb6906..bfd89b47b162 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -167,6 +167,16 @@ static const struct edid_quirk { { "OVR", 0x0001, EDID_QUIRK_NON_DESKTOP }, { "OVR", 0x0003, EDID_QUIRK_NON_DESKTOP }, { "OVR", 0x0004, EDID_QUIRK_NON_DESKTOP }, + + /* Windows Mixed Reality Headsets */ + { "ACR", 0x7fce, EDID_QUIRK_NON_DESKTOP }, + { "HPN", 0x3515, EDID_QUIRK_NON_DESKTOP }, + { "LEN", 0x0408, EDID_QUIRK_NON_DESKTOP }, + { "LEN", 0xb800, EDID_QUIRK_NON_DESKTOP }, + { "FUJ", 0x1970, EDID_QUIRK_NON_DESKTOP }, + { "DEL", 0x7fce, EDID_QUIRK_NON_DESKTOP }, + { "SEC", 0x144a, EDID_QUIRK_NON_DESKTOP }, + { "AUS", 0xc102, EDID_QUIRK_NON_DESKTOP }, }; /* -- cgit v1.2.3 From ccffc9ebfa66e3f2cc5e17b2579202786050b32e Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 19 Feb 2018 18:59:38 +0100 Subject: drm/edid: quirk Sony PlayStation VR headset as non-desktop This uses the EDID info from the Sony PlayStation VR headset, when connected directly, to mark it as non-desktop. Since the connection box (product id b403) defaults to HDMI pass-through to the TV, it is not marked as non-desktop. Signed-off-by: Philipp Zabel Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index bfd89b47b162..9796c29dc004 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -177,6 +177,9 @@ static const struct edid_quirk { { "DEL", 0x7fce, EDID_QUIRK_NON_DESKTOP }, { "SEC", 0x144a, EDID_QUIRK_NON_DESKTOP }, { "AUS", 0xc102, EDID_QUIRK_NON_DESKTOP }, + + /* Sony PlayStation VR Headset */ + { "SNY", 0x0704, EDID_QUIRK_NON_DESKTOP }, }; /* -- cgit v1.2.3 From ed7158bae41044ff696e9aafd5ada46d391a5a2e Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 22 Feb 2018 10:54:55 +0100 Subject: treewide/trivial: Remove ';;$' typo noise On lkml suggestions were made to split up such trivial typo fixes into per subsystem patches: --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -439,7 +439,7 @@ setup_uga32(void **uga_handle, unsigned long size, u32 *width, u32 *height) struct efi_uga_draw_protocol *uga = NULL, *first_uga; efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID; unsigned long nr_ugas; - u32 *handles = (u32 *)uga_handle;; + u32 *handles = (u32 *)uga_handle; efi_status_t status = EFI_INVALID_PARAMETER; int i; This patch is the result of the following script: $ sed -i 's/;;$/;/g' $(git grep -E ';;$' | grep "\.[ch]:" | grep -vwE 'for|ia64' | cut -d: -f1 | sort | uniq) ... followed by manual review to make sure it's all good. Splitting this up is just crazy talk, let's get over with this and just do it. Reported-by: Pavel Machek Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar --- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 2 +- drivers/gpu/drm/amd/powerplay/amd_powerplay.c | 2 +- drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c | 2 +- drivers/gpu/drm/scheduler/gpu_scheduler.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c index 61e8c3e02d16..33d91e4474ea 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c @@ -718,7 +718,7 @@ static enum link_training_result perform_channel_equalization_sequence( uint32_t retries_ch_eq; enum dc_lane_count lane_count = lt_settings->link_settings.lane_count; union lane_align_status_updated dpcd_lane_status_updated = {{0}}; - union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX] = {{{0}}};; + union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX] = {{{0}}}; hw_tr_pattern = get_supported_tp(link); diff --git a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c index 4c3223a4d62b..adb6e7b9280c 100644 --- a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c +++ b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c @@ -162,7 +162,7 @@ static int pp_hw_init(void *handle) if(hwmgr->smumgr_funcs->start_smu(pp_handle->hwmgr)) { pr_err("smc start failed\n"); hwmgr->smumgr_funcs->smu_fini(pp_handle->hwmgr); - return -EINVAL;; + return -EINVAL; } if (ret == PP_DPM_DISABLED) goto exit; diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c index 3e9bba4d6624..6d8e3a9a6fc0 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c @@ -680,7 +680,7 @@ struct msm_kms *mdp5_kms_init(struct drm_device *dev) } else { dev_info(&pdev->dev, "no iommu, fallback to phys contig buffers for scanout\n"); - aspace = NULL;; + aspace = NULL; } pm_runtime_put_sync(&pdev->dev); diff --git a/drivers/gpu/drm/scheduler/gpu_scheduler.c b/drivers/gpu/drm/scheduler/gpu_scheduler.c index 2c18996d59c5..0d95888ccc3e 100644 --- a/drivers/gpu/drm/scheduler/gpu_scheduler.c +++ b/drivers/gpu/drm/scheduler/gpu_scheduler.c @@ -461,7 +461,7 @@ void drm_sched_hw_job_reset(struct drm_gpu_scheduler *sched, struct drm_sched_jo { struct drm_sched_job *s_job; struct drm_sched_entity *entity, *tmp; - int i;; + int i; spin_lock(&sched->job_list_lock); list_for_each_entry_reverse(s_job, &sched->ring_mirror_list, node) { -- cgit v1.2.3 From 2c83029cda55a5e7665c7c6326909427d6a01350 Mon Sep 17 00:00:00 2001 From: Ben Crocker Date: Thu, 22 Feb 2018 17:52:19 -0500 Subject: drm/radeon: insist on 32-bit DMA for Cedar on PPC64/PPC64LE In radeon_device_init, set the need_dma32 flag for Cedar chips (e.g. FirePro 2270). This fixes, or at least works around, a bug on PowerPC exposed by last year's commits 8e3f1b1d8255105f31556aacf8aeb6071b00d469 (Russell Currey) and 253fd51e2f533552ae35a0c661705da6c4842c1b (Alistair Popple) which enabled the 64-bit DMA iommu bypass. This caused the device to freeze, in some cases unrecoverably, and is the subject of several bug reports internal to Red Hat. Signed-off-by: Ben Crocker Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_device.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 8d3e3d2e0090..7828a5e10629 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -1365,6 +1365,10 @@ int radeon_device_init(struct radeon_device *rdev, if ((rdev->flags & RADEON_IS_PCI) && (rdev->family <= CHIP_RS740)) rdev->need_dma32 = true; +#ifdef CONFIG_PPC64 + if (rdev->family == CHIP_CEDAR) + rdev->need_dma32 = true; +#endif dma_bits = rdev->need_dma32 ? 32 : 40; r = pci_set_dma_mask(rdev->pdev, DMA_BIT_MASK(dma_bits)); -- cgit v1.2.3 From c20bb155c2c5acb775f68be5d84fe679687c3c1e Mon Sep 17 00:00:00 2001 From: Ilia Mirkin Date: Sat, 3 Feb 2018 14:11:23 -0500 Subject: drm/nouveau: prefer XBGR2101010 for addfb ioctl Nouveau only exposes support for XBGR2101010. Prior to the atomic conversion, drm would pass in the wrong format in the framebuffer, but it was always ignored -- both userspace (xf86-video-nouveau) and the kernel driver agreed on the layout, so the fact that the format was wrong didn't matter. With the atomic conversion, nouveau all of a sudden started caring about the exact format, and so the previously-working code in xf86-video-nouveau no longer functioned since the (internally-assigned) format from the addfb ioctl was wrong. This change adds infrastructure to allow a drm driver to specify that it prefers the XBGR format variant for the addfb ioctl, and makes nouveau's nv50 display driver set it. (Prior gens had no support for 30bpp at all.) Signed-off-by: Ilia Mirkin Cc: stable@vger.kernel.org # v4.10+ Acked-by: Ben Skeggs Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20180203191123.31507-1-imirkin@alum.mit.edu --- drivers/gpu/drm/drm_framebuffer.c | 4 ++++ drivers/gpu/drm/nouveau/nv50_display.c | 1 + 2 files changed, 5 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/drm_framebuffer.c b/drivers/gpu/drm/drm_framebuffer.c index 5a13ff29f4f0..c0530a1af5e3 100644 --- a/drivers/gpu/drm/drm_framebuffer.c +++ b/drivers/gpu/drm/drm_framebuffer.c @@ -121,6 +121,10 @@ int drm_mode_addfb(struct drm_device *dev, r.pixel_format = drm_mode_legacy_fb_format(or->bpp, or->depth); r.handles[0] = or->handle; + if (r.pixel_format == DRM_FORMAT_XRGB2101010 && + dev->driver->driver_features & DRIVER_PREFER_XBGR_30BPP) + r.pixel_format = DRM_FORMAT_XBGR2101010; + ret = drm_mode_addfb2(dev, &r, file_priv); if (ret) return ret; diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c index dd8d4352ed99..caddce88d2d8 100644 --- a/drivers/gpu/drm/nouveau/nv50_display.c +++ b/drivers/gpu/drm/nouveau/nv50_display.c @@ -4477,6 +4477,7 @@ nv50_display_create(struct drm_device *dev) nouveau_display(dev)->fini = nv50_display_fini; disp->disp = &nouveau_display(dev)->disp; dev->mode_config.funcs = &nv50_disp_func; + dev->driver->driver_features |= DRIVER_PREFER_XBGR_30BPP; if (nouveau_atomic) dev->driver->driver_features |= DRIVER_ATOMIC; -- cgit v1.2.3 From 80b79e31c4195731464d96716f15716f38a555eb Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Thu, 22 Feb 2018 17:12:17 +0100 Subject: drm/sun4i: Enable the output on the pins (tcon0) I noticed that with 4.16-rc1 LVDS output on A83T based TBS A711 tablet doesn't work (there's output but it's garbled). I compared some older patches for LVDS support with the mainlined ones and this change is missing from mainline Linux. I don't know what the register does exactly and the harcoded register value doesn't inspire much confidence that it will work in a general case, so I'm sending this RFC. This patch fixes the issue on A83T. Signed-off-by: Ondrej Jirman Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20180222161217.23904-1-megous@megous.com --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 3c15cf24b503..51740ddb4b32 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -335,6 +335,9 @@ static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon, regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG, SUN4I_TCON_GCTL_IOMAP_MASK, SUN4I_TCON_GCTL_IOMAP_TCON0); + + /* Enable the output on the pins */ + regmap_write(tcon->regs, SUN4I_TCON0_IO_TRI_REG, 0xe0000000); } static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, -- cgit v1.2.3 From 79d103a565d16b1893d990b2ee5e0fe71767759f Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 21 Feb 2018 10:20:27 +0100 Subject: drm/sun4i: Protect the TCON pixel clocks Both TCON clocks are very sensitive to clock changes, since any change might lead to improper timings. Make sure our rate is never changed. Tested-by: Giulio Benetti Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/d5224d2e81ecf73dc09f234e580ada52c00eaee3.1519204731.git-series.maxime.ripard@bootlin.com --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 51740ddb4b32..b3960118deb9 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -260,7 +260,7 @@ static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon, const struct drm_display_mode *mode) { /* Configure the dot clock */ - clk_set_rate(tcon->dclk, mode->crtc_clock * 1000); + clk_set_rate_exclusive(tcon->dclk, mode->crtc_clock * 1000); /* Set the resolution */ regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG, @@ -421,7 +421,7 @@ static void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon, WARN_ON(!tcon->quirks->has_channel_1); /* Configure the dot clock */ - clk_set_rate(tcon->sclk1, mode->crtc_clock * 1000); + clk_set_rate_exclusive(tcon->sclk1, mode->crtc_clock * 1000); /* Adjust clock delay */ clk_delay = sun4i_tcon_get_clk_delay(mode, 1); -- cgit v1.2.3 From 9a191b114906457c4b2494c474f58ae4142d4e67 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 21 Feb 2018 11:50:03 +1000 Subject: virtio-gpu: fix ioctl and expose the fixed status to userspace. This exposes to mesa that it can use the fixed ioctl for querying later cap sets, cap set 1 is forever frozen in time. Signed-off-by: Dave Airlie Link: http://patchwork.freedesktop.org/patch/msgid/20180221015003.22884-1-airlied@gmail.com Signed-off-by: Gerd Hoffmann --- drivers/gpu/drm/virtio/virtgpu_ioctl.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/virtio/virtgpu_ioctl.c b/drivers/gpu/drm/virtio/virtgpu_ioctl.c index 5720a0d4ac0a..677ac16c8a6d 100644 --- a/drivers/gpu/drm/virtio/virtgpu_ioctl.c +++ b/drivers/gpu/drm/virtio/virtgpu_ioctl.c @@ -197,6 +197,9 @@ static int virtio_gpu_getparam_ioctl(struct drm_device *dev, void *data, case VIRTGPU_PARAM_3D_FEATURES: value = vgdev->has_virgl_3d == true ? 1 : 0; break; + case VIRTGPU_PARAM_CAPSET_QUERY_FIX: + value = 1; + break; default: return -EINVAL; } @@ -472,7 +475,7 @@ static int virtio_gpu_get_caps_ioctl(struct drm_device *dev, { struct virtio_gpu_device *vgdev = dev->dev_private; struct drm_virtgpu_get_caps *args = data; - int size; + unsigned size, host_caps_size; int i; int found_valid = -1; int ret; @@ -481,6 +484,10 @@ static int virtio_gpu_get_caps_ioctl(struct drm_device *dev, if (vgdev->num_capsets == 0) return -ENOSYS; + /* don't allow userspace to pass 0 */ + if (args->size == 0) + return -EINVAL; + spin_lock(&vgdev->display_info_lock); for (i = 0; i < vgdev->num_capsets; i++) { if (vgdev->capsets[i].id == args->cap_set_id) { @@ -496,11 +503,9 @@ static int virtio_gpu_get_caps_ioctl(struct drm_device *dev, return -EINVAL; } - size = vgdev->capsets[found_valid].max_size; - if (args->size > size) { - spin_unlock(&vgdev->display_info_lock); - return -EINVAL; - } + host_caps_size = vgdev->capsets[found_valid].max_size; + /* only copy to user the minimum of the host caps size or the guest caps size */ + size = min(args->size, host_caps_size); list_for_each_entry(cache_ent, &vgdev->cap_cache, head) { if (cache_ent->id == args->cap_set_id && -- cgit v1.2.3 From b1b13780ab06ef8c770dd9cbe31dac549a11630e Mon Sep 17 00:00:00 2001 From: Daniele Ceraolo Spurio Date: Wed, 14 Feb 2018 11:18:25 -0800 Subject: drm/i915: Fix rsvd2 mask when out-fence is returned GENMASK_ULL wants the high bit of the mask first. The current value cancels the in-fence when an out-fence is returned. Fixes: fec0445caa273 ("drm/i915: Support explicit fencing for execbuf") Testcase: igt/gem_exec_fence/keep-in-fence* Cc: Chris Wilson Signed-off-by: Daniele Ceraolo Spurio Reviewed-by: Chris Wilson Signed-off-by: Chris Wilson Link: https://patchwork.freedesktop.org/patch/msgid/20180214191827.8465-1-daniele.ceraolospurio@intel.com Cc: # v4.12+ (cherry picked from commit b6a88e4a804cf5a71159906e16df2c1fc7196f92) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 4401068ff468..36fca0e7b4ca 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -2410,7 +2410,7 @@ err_request: if (out_fence) { if (err == 0) { fd_install(out_fence_fd, out_fence->file); - args->rsvd2 &= GENMASK_ULL(0, 31); /* keep in-fence */ + args->rsvd2 &= GENMASK_ULL(31, 0); /* keep in-fence */ args->rsvd2 |= (u64)out_fence_fd << 32; out_fence_fd = -1; } else { -- cgit v1.2.3 From 72a6d72c2cd03bba7b70117b63dea83d2de88057 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Wed, 14 Feb 2018 19:38:40 +0200 Subject: drm/i915/audio: fix check for av_enc_map overflow Turns out -1 >= ARRAY_SIZE() is always true. Move the bounds check where we know pipe >= 0 and next to the array indexing where it makes most sense. Fixes: 9965db26ac05 ("drm/i915: Check for fused or unused pipes") Fixes: 0b7029b7e43f ("drm/i915: Check for fused or unused pipes") Cc: # v4.10+ Cc: Mika Kahola Cc: Rodrigo Vivi Cc: Jani Nikula Cc: Joonas Lahtinen Cc: intel-gfx@lists.freedesktop.org Reviewed-by: Dhinakaran Pandiyan Reviewed-by: Mika Kahola Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20180214173840.25360-1-jani.nikula@intel.com (cherry picked from commit cdb3db8542d854bd678d60cd28861b042e191672) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/intel_audio.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c index 522d54fecb53..4a01f62a392d 100644 --- a/drivers/gpu/drm/i915/intel_audio.c +++ b/drivers/gpu/drm/i915/intel_audio.c @@ -779,11 +779,11 @@ static struct intel_encoder *get_saved_enc(struct drm_i915_private *dev_priv, { struct intel_encoder *encoder; - if (WARN_ON(pipe >= ARRAY_SIZE(dev_priv->av_enc_map))) - return NULL; - /* MST */ if (pipe >= 0) { + if (WARN_ON(pipe >= ARRAY_SIZE(dev_priv->av_enc_map))) + return NULL; + encoder = dev_priv->av_enc_map[pipe]; /* * when bootup, audio driver may not know it is -- cgit v1.2.3 From 1b0008450f23632b029e9fde9a71be90f119ec35 Mon Sep 17 00:00:00 2001 From: Mahesh Kumar Date: Thu, 15 Feb 2018 15:26:41 +0530 Subject: drm/i915/cnl: Fix PORT_TX_DW5/7 register address Register Address for CNL_PORT_DW5_LN0_D is 0x162E54, but current code is defining it as 0x162ED4. Similarly for CNL_PORT_DW7_LN0_D register address is defined 0x162EDC instead of 0x162E5C, fix it. Signed-off-by: Mahesh Kumar Fixes: 04416108ccea ("drm/i915/cnl: Add registers related to voltage swing sequences.") Reviewed-by: Rodrigo Vivi Signed-off-by: Rodrigo Vivi Link: https://patchwork.freedesktop.org/patch/msgid/20180215095643.3844-2-mahesh1.kumar@intel.com (cherry picked from commit e103962611b2d464be6ab596d7b3495fe7b4c132) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/i915_reg.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index a2108e35c599..33eb0c5b1d32 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2027,7 +2027,7 @@ enum i915_power_well_id { #define _CNL_PORT_TX_DW5_LN0_AE 0x162454 #define _CNL_PORT_TX_DW5_LN0_B 0x162654 #define _CNL_PORT_TX_DW5_LN0_C 0x162C54 -#define _CNL_PORT_TX_DW5_LN0_D 0x162ED4 +#define _CNL_PORT_TX_DW5_LN0_D 0x162E54 #define _CNL_PORT_TX_DW5_LN0_F 0x162854 #define CNL_PORT_TX_DW5_GRP(port) _MMIO_PORT6(port, \ _CNL_PORT_TX_DW5_GRP_AE, \ @@ -2058,7 +2058,7 @@ enum i915_power_well_id { #define _CNL_PORT_TX_DW7_LN0_AE 0x16245C #define _CNL_PORT_TX_DW7_LN0_B 0x16265C #define _CNL_PORT_TX_DW7_LN0_C 0x162C5C -#define _CNL_PORT_TX_DW7_LN0_D 0x162EDC +#define _CNL_PORT_TX_DW7_LN0_D 0x162E5C #define _CNL_PORT_TX_DW7_LN0_F 0x16285C #define CNL_PORT_TX_DW7_GRP(port) _MMIO_PORT6(port, \ _CNL_PORT_TX_DW7_GRP_AE, \ -- cgit v1.2.3 From e659d14ed48096f87a678e7ebbdf286a817b4d0e Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 19 Feb 2018 14:01:44 +0000 Subject: drm/i915: Clear the in-use marker on execbuf failure If we fail to unbind the vma (due to a signal on an active buffer that needs to be moved for the next execbuf), then we need to clear the persistent tracking state we setup for this execbuf. Fixes: c7c6e46f913b ("drm/i915: Convert execbuf to use struct-of-array packing for critical fields") Testcase: igt/gem_fenced_exec_thrash/no-spare-fences-busy* Signed-off-by: Chris Wilson Cc: Tvrtko Ursulin Cc: Joonas Lahtinen Cc: # v4.14+ Reviewed-by: Tvrtko Ursulin Link: https://patchwork.freedesktop.org/patch/msgid/20180219140144.24004-1-chris@chris-wilson.co.uk (cherry picked from commit ed2f3532321083cf40e4da4e36234880e0136136) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 36fca0e7b4ca..3ab1ace2a6bd 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -505,6 +505,8 @@ eb_add_vma(struct i915_execbuffer *eb, unsigned int i, struct i915_vma *vma) list_add_tail(&vma->exec_link, &eb->unbound); if (drm_mm_node_allocated(&vma->node)) err = i915_vma_unbind(vma); + if (unlikely(err)) + vma->exec_flags = NULL; } return err; } -- cgit v1.2.3 From fa89782b4f9c40d40e3f7d9ad7ef14e0bb0c3ca0 Mon Sep 17 00:00:00 2001 From: Tvrtko Ursulin Date: Tue, 20 Feb 2018 10:47:42 +0000 Subject: drm/i915: Make global seqno known in i915_gem_request_execute tracepoint Commit fe49789fab97 ("drm/i915: Deconstruct execute fence") re-arranged the code and moved the i915_gem_request_execute tracepoint to before the global seqno is assigned to the request. We need to move the tracepoint a bit later so this information is once again available. Signed-off-by: Tvrtko Ursulin Fixes: fe49789fab97 ("drm/i915: Deconstruct execute fence") Cc: Chris Wilson Cc: Tvrtko Ursulin Cc: Jani Nikula Cc: Joonas Lahtinen Cc: Rodrigo Vivi Cc: intel-gfx@lists.freedesktop.org Reviewed-by: Chris Wilson Link: https://patchwork.freedesktop.org/patch/msgid/20180220104742.565-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 158863fb50968c0ae85e87a401221425c941b9f0) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/i915_gem_request.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_gem_request.c b/drivers/gpu/drm/i915/i915_gem_request.c index e09d18df8b7f..a3e93d46316a 100644 --- a/drivers/gpu/drm/i915/i915_gem_request.c +++ b/drivers/gpu/drm/i915/i915_gem_request.c @@ -476,8 +476,6 @@ void __i915_gem_request_submit(struct drm_i915_gem_request *request) GEM_BUG_ON(!irqs_disabled()); lockdep_assert_held(&engine->timeline->lock); - trace_i915_gem_request_execute(request); - /* Transfer from per-context onto the global per-engine timeline */ timeline = engine->timeline; GEM_BUG_ON(timeline == request->timeline); @@ -501,6 +499,8 @@ void __i915_gem_request_submit(struct drm_i915_gem_request *request) list_move_tail(&request->link, &timeline->requests); spin_unlock(&request->timeline->lock); + trace_i915_gem_request_execute(request); + wake_up_all(&request->execute); } -- cgit v1.2.3 From d6b6669762898dfc99e9273b8d8603bc47014aa9 Mon Sep 17 00:00:00 2001 From: Shirish S Date: Wed, 21 Feb 2018 16:10:33 +0530 Subject: drm/amd/display: check for ipp before calling cursor operations Currently all cursor related functions are made to all pipes that are attached to a particular stream. This is not applicable to pipes that do not have cursor plane initialised like underlay. Hence this patch allows cursor related operations on a pipe only if ipp in available on that particular pipe. The check is added to set_cursor_position & set_cursor_attribute. Signed-off-by: Shirish S Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/core/dc_stream.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c index 261811e0c094..539c3e0a6292 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c @@ -197,7 +197,8 @@ bool dc_stream_set_cursor_attributes( for (i = 0; i < MAX_PIPES; i++) { struct pipe_ctx *pipe_ctx = &res_ctx->pipe_ctx[i]; - if (pipe_ctx->stream != stream || (!pipe_ctx->plane_res.xfm && !pipe_ctx->plane_res.dpp)) + if (pipe_ctx->stream != stream || (!pipe_ctx->plane_res.xfm && + !pipe_ctx->plane_res.dpp) || !pipe_ctx->plane_res.ipp) continue; if (pipe_ctx->top_pipe && pipe_ctx->plane_state != pipe_ctx->top_pipe->plane_state) continue; @@ -273,7 +274,8 @@ bool dc_stream_set_cursor_position( if (pipe_ctx->stream != stream || (!pipe_ctx->plane_res.mi && !pipe_ctx->plane_res.hubp) || !pipe_ctx->plane_state || - (!pipe_ctx->plane_res.xfm && !pipe_ctx->plane_res.dpp)) + (!pipe_ctx->plane_res.xfm && !pipe_ctx->plane_res.dpp) || + !pipe_ctx->plane_res.ipp) continue; if (pipe_ctx->plane_state->address.type -- cgit v1.2.3 From 9f51943c2a434d40f46776369b7a72e0ffb6ea59 Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Fri, 19 Jan 2018 19:02:16 +0800 Subject: drm/amdgpu: only flush hotplug work without DC since hotplug_work is initialized under the case of no dc support Signed-off-by: Monk Liu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c index 56bcd59c3399..36483e0d3c97 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c @@ -257,7 +257,8 @@ int amdgpu_irq_init(struct amdgpu_device *adev) r = drm_irq_install(adev->ddev, adev->ddev->pdev->irq); if (r) { adev->irq.installed = false; - flush_work(&adev->hotplug_work); + if (!amdgpu_device_has_dc_support(adev)) + flush_work(&adev->hotplug_work); cancel_work_sync(&adev->reset_work); return r; } @@ -282,7 +283,8 @@ void amdgpu_irq_fini(struct amdgpu_device *adev) adev->irq.installed = false; if (adev->irq.msi_enabled) pci_disable_msi(adev->pdev); - flush_work(&adev->hotplug_work); + if (!amdgpu_device_has_dc_support(adev)) + flush_work(&adev->hotplug_work); cancel_work_sync(&adev->reset_work); } -- cgit v1.2.3 From a4ef6edc8e87bee656a5feaedb0bb167acd9d360 Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Wed, 24 Jan 2018 12:20:32 +0800 Subject: drm/amdgpu: move WB_FREE to correct place WB_FREE should be put after all engines's hw_fini done, otherwise the invalid wptr/rptr_addr would still be used by engines which trigger abnormal bugs. This fixes couple DMAR reading error in host side for SRIOV after guest kmd is unloaded. Signed-off-by: Monk Liu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 829dc2edace6..d9f3d54e228f 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -1455,11 +1455,6 @@ static int amdgpu_device_ip_fini(struct amdgpu_device *adev) for (i = adev->num_ip_blocks - 1; i >= 0; i--) { if (!adev->ip_blocks[i].status.hw) continue; - if (adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_GMC) { - amdgpu_free_static_csa(adev); - amdgpu_device_wb_fini(adev); - amdgpu_device_vram_scratch_fini(adev); - } if (adev->ip_blocks[i].version->type != AMD_IP_BLOCK_TYPE_UVD && adev->ip_blocks[i].version->type != AMD_IP_BLOCK_TYPE_VCE) { @@ -1486,6 +1481,13 @@ static int amdgpu_device_ip_fini(struct amdgpu_device *adev) for (i = adev->num_ip_blocks - 1; i >= 0; i--) { if (!adev->ip_blocks[i].status.sw) continue; + + if (adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_GMC) { + amdgpu_free_static_csa(adev); + amdgpu_device_wb_fini(adev); + amdgpu_device_vram_scratch_fini(adev); + } + r = adev->ip_blocks[i].version->funcs->sw_fini((void *)adev); /* XXX handle errors */ if (r) { -- cgit v1.2.3 From 8014e2d3fd640c892ed334e7de7af918e141c8ff Mon Sep 17 00:00:00 2001 From: James Zhu Date: Tue, 27 Feb 2018 09:55:17 -0500 Subject: drm/amdgpu:Fixed wrong emit frame size for enc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Emit frame size should match with corresponding function, uvd_v6_0_enc_ring_emit_vm_flush has 5 amdgpu_ring_write Signed-off-by: James Zhu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c b/drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c index b2bfedaf57f1..9bab4842cd44 100644 --- a/drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c +++ b/drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c @@ -1618,7 +1618,7 @@ static const struct amdgpu_ring_funcs uvd_v6_0_enc_ring_vm_funcs = { .set_wptr = uvd_v6_0_enc_ring_set_wptr, .emit_frame_size = 4 + /* uvd_v6_0_enc_ring_emit_pipeline_sync */ - 6 + /* uvd_v6_0_enc_ring_emit_vm_flush */ + 5 + /* uvd_v6_0_enc_ring_emit_vm_flush */ 5 + 5 + /* uvd_v6_0_enc_ring_emit_fence x2 vm fence */ 1, /* uvd_v6_0_enc_ring_insert_end */ .emit_ib_size = 5, /* uvd_v6_0_enc_ring_emit_ib */ -- cgit v1.2.3 From a0aaa03062be252aacad60a776f3374dd53e3f98 Mon Sep 17 00:00:00 2001 From: Eric Huang Date: Mon, 26 Feb 2018 17:36:19 -0500 Subject: drm/amd/powerplay: fix power over limit on Fiji power containment disabled only on Fiji and compute power profile. It violates PCIe spec and may cause power supply failed. Enabling it will fix the issue, even the fix will drop performance of some compute tests. Signed-off-by: Eric Huang Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 45be31327340..08e8a793714f 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -4537,13 +4537,6 @@ static int smu7_set_power_profile_state(struct pp_hwmgr *hwmgr, int tmp_result, result = 0; uint32_t sclk_mask = 0, mclk_mask = 0; - if (hwmgr->chip_id == CHIP_FIJI) { - if (request->type == AMD_PP_GFX_PROFILE) - smu7_enable_power_containment(hwmgr); - else if (request->type == AMD_PP_COMPUTE_PROFILE) - smu7_disable_power_containment(hwmgr); - } - if (hwmgr->dpm_level != AMD_DPM_FORCED_LEVEL_AUTO) return -EINVAL; -- cgit v1.2.3 From 8d333fe0ad9dcb9651b9b450424a960bac040f96 Mon Sep 17 00:00:00 2001 From: Emily Deng Date: Wed, 7 Feb 2018 16:17:16 +0800 Subject: drm/amdgpu: Correct sdma_v4 get_wptr(v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit the original method will change the wptr value in wb. v2: furthur cleanup Signed-off-by: Emily Deng Signed-off-by: Monk Liu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c index e92fb372bc99..91cf95a8c39c 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c @@ -238,31 +238,27 @@ static uint64_t sdma_v4_0_ring_get_rptr(struct amdgpu_ring *ring) static uint64_t sdma_v4_0_ring_get_wptr(struct amdgpu_ring *ring) { struct amdgpu_device *adev = ring->adev; - u64 *wptr = NULL; - uint64_t local_wptr = 0; + u64 wptr; if (ring->use_doorbell) { /* XXX check if swapping is necessary on BE */ - wptr = ((u64 *)&adev->wb.wb[ring->wptr_offs]); - DRM_DEBUG("wptr/doorbell before shift == 0x%016llx\n", *wptr); - *wptr = (*wptr) >> 2; - DRM_DEBUG("wptr/doorbell after shift == 0x%016llx\n", *wptr); + wptr = READ_ONCE(*((u64 *)&adev->wb.wb[ring->wptr_offs])); + DRM_DEBUG("wptr/doorbell before shift == 0x%016llx\n", wptr); } else { u32 lowbit, highbit; int me = (ring == &adev->sdma.instance[0].ring) ? 0 : 1; - wptr = &local_wptr; lowbit = RREG32(sdma_v4_0_get_reg_offset(adev, me, mmSDMA0_GFX_RB_WPTR)) >> 2; highbit = RREG32(sdma_v4_0_get_reg_offset(adev, me, mmSDMA0_GFX_RB_WPTR_HI)) >> 2; DRM_DEBUG("wptr [%i]high== 0x%08x low==0x%08x\n", me, highbit, lowbit); - *wptr = highbit; - *wptr = (*wptr) << 32; - *wptr |= lowbit; + wptr = highbit; + wptr = wptr << 32; + wptr |= lowbit; } - return *wptr; + return wptr >> 2; } /** -- cgit v1.2.3 From f812dec57d55719f5fe1f6fce193561015369363 Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Fri, 29 Dec 2017 17:06:41 +0800 Subject: drm/amdgpu: fix&cleanups for wb_clear fix: should do right shift on wb before clearing cleanups: 1,should memset all wb buffer 2,set max wb number to 128 (total 4KB) is big enough Signed-off-by: Monk Liu Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 2 +- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index d5a2eefd6c3e..74edba18b159 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -1156,7 +1156,7 @@ static inline void amdgpu_set_ib_value(struct amdgpu_cs_parser *p, /* * Writeback */ -#define AMDGPU_MAX_WB 512 /* Reserve at most 512 WB slots for amdgpu-owned rings. */ +#define AMDGPU_MAX_WB 128 /* Reserve at most 128 WB slots for amdgpu-owned rings. */ struct amdgpu_wb { struct amdgpu_bo *wb_obj; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index d9f3d54e228f..af1b879a9ee9 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -492,7 +492,7 @@ static int amdgpu_device_wb_init(struct amdgpu_device *adev) memset(&adev->wb.used, 0, sizeof(adev->wb.used)); /* clear wb memory */ - memset((char *)adev->wb.wb, 0, AMDGPU_MAX_WB * sizeof(uint32_t)); + memset((char *)adev->wb.wb, 0, AMDGPU_MAX_WB * sizeof(uint32_t) * 8); } return 0; @@ -530,8 +530,9 @@ int amdgpu_device_wb_get(struct amdgpu_device *adev, u32 *wb) */ void amdgpu_device_wb_free(struct amdgpu_device *adev, u32 wb) { + wb >>= 3; if (wb < adev->wb.num_wb) - __clear_bit(wb >> 3, adev->wb.used); + __clear_bit(wb, adev->wb.used); } /** -- cgit v1.2.3 From 82d0ece957bcd0e6d500759b205508dbda1bc265 Mon Sep 17 00:00:00 2001 From: Tom St Denis Date: Mon, 26 Feb 2018 09:09:26 -0500 Subject: drm/amd/amdgpu: Correct VRAM width for APUs with GMC9 DDR4 has a 64-bit width not 128-bits. It was reporting twice the width. Tested with my Ryzen 2400G. Signed-off-by: Tom St Denis Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c index 2719937e09d6..fd6370982c9a 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c @@ -682,7 +682,10 @@ static int gmc_v9_0_mc_init(struct amdgpu_device *adev) adev->mc.vram_width = amdgpu_atomfirmware_get_vram_width(adev); if (!adev->mc.vram_width) { /* hbm memory channel size */ - chansize = 128; + if (adev->flags & AMD_IS_APU) + chansize = 64; + else + chansize = 128; tmp = RREG32_SOC15(DF, 0, mmDF_CS_AON0_DramBaseAddress0); tmp &= DF_CS_AON0_DramBaseAddress0__IntLvNumChan_MASK; -- cgit v1.2.3 From fd430a702d37747d79bb5520590ce198df02aaa5 Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Thu, 18 Jan 2018 16:58:04 +0800 Subject: drm/amdgpu: skip ECC for SRIOV in gmc late_init Signed-off-by: Monk Liu Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c index fd6370982c9a..3b7e7af09ead 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c @@ -634,7 +634,7 @@ static int gmc_v9_0_late_init(void *handle) for(i = 0; i < AMDGPU_MAX_VMHUBS; ++i) BUG_ON(vm_inv_eng[i] > 16); - if (adev->asic_type == CHIP_VEGA10) { + if (adev->asic_type == CHIP_VEGA10 && !amdgpu_sriov_vf(adev)) { r = gmc_v9_0_ecc_available(adev); if (r == 1) { DRM_INFO("ECC is active.\n"); -- cgit v1.2.3 From e64b6afa98f3629d0c0c46233bbdbe8acdb56f06 Mon Sep 17 00:00:00 2001 From: Giulio Benetti Date: Wed, 28 Feb 2018 17:46:53 +0100 Subject: drm/sun4i: Fix dclk_set_phase Phase value is not shifted before writing. Shift left of 28 bits to fit right bits Signed-off-by: Giulio Benetti Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/1519836413-35023-1-git-send-email-giulio.benetti@micronovasrl.com --- drivers/gpu/drm/sun4i/sun4i_dotclock.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/sun4i/sun4i_dotclock.c b/drivers/gpu/drm/sun4i/sun4i_dotclock.c index 023f39bda633..e36004fbe453 100644 --- a/drivers/gpu/drm/sun4i/sun4i_dotclock.c +++ b/drivers/gpu/drm/sun4i/sun4i_dotclock.c @@ -132,10 +132,13 @@ static int sun4i_dclk_get_phase(struct clk_hw *hw) static int sun4i_dclk_set_phase(struct clk_hw *hw, int degrees) { struct sun4i_dclk *dclk = hw_to_dclk(hw); + u32 val = degrees / 120; + + val <<= 28; regmap_update_bits(dclk->regmap, SUN4I_TCON0_IO_POL_REG, GENMASK(29, 28), - degrees / 120); + val); return 0; } -- cgit v1.2.3 From f3e5feeb92a163c935659b7222a32965276c1c23 Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Thu, 1 Mar 2018 22:34:32 +0100 Subject: drm/sun4i: Release exclusive clock lock when disabling TCON Currently exclusive TCON clock lock is never released, which, for example, prevents changing resolution on HDMI. In order to fix that, release clock when disabling TCON. TCON is always disabled first before new mode is set. Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-7-jernej.skrabec@siol.net --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index b3960118deb9..ade197b1a9ac 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -101,10 +101,12 @@ static void sun4i_tcon_channel_set_status(struct sun4i_tcon *tcon, int channel, return; } - if (enabled) + if (enabled) { clk_prepare_enable(clk); - else + } else { + clk_rate_exclusive_put(clk); clk_disable_unprepare(clk); + } } static void sun4i_tcon_lvds_set_status(struct sun4i_tcon *tcon, -- cgit v1.2.3 From a8d0fb2fa3e71d73d5cebcd0fe10e18d3b2264e9 Mon Sep 17 00:00:00 2001 From: Tom St Denis Date: Thu, 1 Mar 2018 09:39:57 -0500 Subject: drm/amd/amdgpu: Mask rptr as well in ring debugfs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The read/write pointers on sdma4 devices increment beyond the ring size and should be masked. Tested on my Ryzen 2400G. Signed-off-by: Tom St Denis Reviewed-by: Alex Deucher Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c index 13044e66dcaf..561d3312af32 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c @@ -481,7 +481,7 @@ static ssize_t amdgpu_debugfs_ring_read(struct file *f, char __user *buf, result = 0; if (*pos < 12) { - early[0] = amdgpu_ring_get_rptr(ring); + early[0] = amdgpu_ring_get_rptr(ring) & ring->buf_mask; early[1] = amdgpu_ring_get_wptr(ring) & ring->buf_mask; early[2] = ring->wptr & ring->buf_mask; for (i = *pos / 4; i < 3 && size; i++) { -- cgit v1.2.3 From 05656e5e4917a08296300dc0530aed1539202c25 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 26 Feb 2018 11:05:10 -0500 Subject: drm/amdgpu: used cached pcie gen info for SI (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Rather than querying it every time we need it. Also fixes a crash in VM pass through if there is no root bridge because the cached value fetch already checks this properly. v2: fix includes Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=105244 Acked-by: Christian König Reviewed-by: Rex Zhu Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/si.c | 22 ++++++++-------- drivers/gpu/drm/amd/amdgpu/si_dpm.c | 50 ++++++++++--------------------------- 2 files changed, 23 insertions(+), 49 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/si.c b/drivers/gpu/drm/amd/amdgpu/si.c index 543101d5a5ed..2095173aaabf 100644 --- a/drivers/gpu/drm/amd/amdgpu/si.c +++ b/drivers/gpu/drm/amd/amdgpu/si.c @@ -31,6 +31,7 @@ #include "amdgpu_uvd.h" #include "amdgpu_vce.h" #include "atom.h" +#include "amd_pcie.h" #include "amdgpu_powerplay.h" #include "sid.h" #include "si_ih.h" @@ -1461,8 +1462,8 @@ static void si_pcie_gen3_enable(struct amdgpu_device *adev) { struct pci_dev *root = adev->pdev->bus->self; int bridge_pos, gpu_pos; - u32 speed_cntl, mask, current_data_rate; - int ret, i; + u32 speed_cntl, current_data_rate; + int i; u16 tmp16; if (pci_is_root_bus(adev->pdev->bus)) @@ -1474,23 +1475,20 @@ static void si_pcie_gen3_enable(struct amdgpu_device *adev) if (adev->flags & AMD_IS_APU) return; - ret = drm_pcie_get_speed_cap_mask(adev->ddev, &mask); - if (ret != 0) - return; - - if (!(mask & (DRM_PCIE_SPEED_50 | DRM_PCIE_SPEED_80))) + if (!(adev->pm.pcie_gen_mask & (CAIL_PCIE_LINK_SPEED_SUPPORT_GEN2 | + CAIL_PCIE_LINK_SPEED_SUPPORT_GEN3))) return; speed_cntl = RREG32_PCIE_PORT(PCIE_LC_SPEED_CNTL); current_data_rate = (speed_cntl & LC_CURRENT_DATA_RATE_MASK) >> LC_CURRENT_DATA_RATE_SHIFT; - if (mask & DRM_PCIE_SPEED_80) { + if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN3) { if (current_data_rate == 2) { DRM_INFO("PCIE gen 3 link speeds already enabled\n"); return; } DRM_INFO("enabling PCIE gen 3 link speeds, disable with amdgpu.pcie_gen2=0\n"); - } else if (mask & DRM_PCIE_SPEED_50) { + } else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN2) { if (current_data_rate == 1) { DRM_INFO("PCIE gen 2 link speeds already enabled\n"); return; @@ -1506,7 +1504,7 @@ static void si_pcie_gen3_enable(struct amdgpu_device *adev) if (!gpu_pos) return; - if (mask & DRM_PCIE_SPEED_80) { + if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN3) { if (current_data_rate != 2) { u16 bridge_cfg, gpu_cfg; u16 bridge_cfg2, gpu_cfg2; @@ -1589,9 +1587,9 @@ static void si_pcie_gen3_enable(struct amdgpu_device *adev) pci_read_config_word(adev->pdev, gpu_pos + PCI_EXP_LNKCTL2, &tmp16); tmp16 &= ~0xf; - if (mask & DRM_PCIE_SPEED_80) + if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN3) tmp16 |= 3; - else if (mask & DRM_PCIE_SPEED_50) + else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN2) tmp16 |= 2; else tmp16 |= 1; diff --git a/drivers/gpu/drm/amd/amdgpu/si_dpm.c b/drivers/gpu/drm/amd/amdgpu/si_dpm.c index ce675a7f179a..22f0b7ff3ac9 100644 --- a/drivers/gpu/drm/amd/amdgpu/si_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/si_dpm.c @@ -26,6 +26,7 @@ #include "amdgpu_pm.h" #include "amdgpu_dpm.h" #include "amdgpu_atombios.h" +#include "amd_pcie.h" #include "sid.h" #include "r600_dpm.h" #include "si_dpm.h" @@ -3331,29 +3332,6 @@ static void btc_apply_voltage_delta_rules(struct amdgpu_device *adev, } } -static enum amdgpu_pcie_gen r600_get_pcie_gen_support(struct amdgpu_device *adev, - u32 sys_mask, - enum amdgpu_pcie_gen asic_gen, - enum amdgpu_pcie_gen default_gen) -{ - switch (asic_gen) { - case AMDGPU_PCIE_GEN1: - return AMDGPU_PCIE_GEN1; - case AMDGPU_PCIE_GEN2: - return AMDGPU_PCIE_GEN2; - case AMDGPU_PCIE_GEN3: - return AMDGPU_PCIE_GEN3; - default: - if ((sys_mask & DRM_PCIE_SPEED_80) && (default_gen == AMDGPU_PCIE_GEN3)) - return AMDGPU_PCIE_GEN3; - else if ((sys_mask & DRM_PCIE_SPEED_50) && (default_gen == AMDGPU_PCIE_GEN2)) - return AMDGPU_PCIE_GEN2; - else - return AMDGPU_PCIE_GEN1; - } - return AMDGPU_PCIE_GEN1; -} - static void r600_calculate_u_and_p(u32 i, u32 r_c, u32 p_b, u32 *p, u32 *u) { @@ -5028,10 +5006,11 @@ static int si_populate_smc_acpi_state(struct amdgpu_device *adev, table->ACPIState.levels[0].vddc.index, &table->ACPIState.levels[0].std_vddc); } - table->ACPIState.levels[0].gen2PCIE = (u8)r600_get_pcie_gen_support(adev, - si_pi->sys_pcie_mask, - si_pi->boot_pcie_gen, - AMDGPU_PCIE_GEN1); + table->ACPIState.levels[0].gen2PCIE = + (u8)amdgpu_get_pcie_gen_support(adev, + si_pi->sys_pcie_mask, + si_pi->boot_pcie_gen, + AMDGPU_PCIE_GEN1); if (si_pi->vddc_phase_shed_control) si_populate_phase_shedding_value(adev, @@ -7168,10 +7147,10 @@ static void si_parse_pplib_clock_info(struct amdgpu_device *adev, pl->vddc = le16_to_cpu(clock_info->si.usVDDC); pl->vddci = le16_to_cpu(clock_info->si.usVDDCI); pl->flags = le32_to_cpu(clock_info->si.ulFlags); - pl->pcie_gen = r600_get_pcie_gen_support(adev, - si_pi->sys_pcie_mask, - si_pi->boot_pcie_gen, - clock_info->si.ucPCIEGen); + pl->pcie_gen = amdgpu_get_pcie_gen_support(adev, + si_pi->sys_pcie_mask, + si_pi->boot_pcie_gen, + clock_info->si.ucPCIEGen); /* patch up vddc if necessary */ ret = si_get_leakage_voltage_from_leakage_index(adev, pl->vddc, @@ -7326,7 +7305,6 @@ static int si_dpm_init(struct amdgpu_device *adev) struct si_power_info *si_pi; struct atom_clock_dividers dividers; int ret; - u32 mask; si_pi = kzalloc(sizeof(struct si_power_info), GFP_KERNEL); if (si_pi == NULL) @@ -7336,11 +7314,9 @@ static int si_dpm_init(struct amdgpu_device *adev) eg_pi = &ni_pi->eg; pi = &eg_pi->rv7xx; - ret = drm_pcie_get_speed_cap_mask(adev->ddev, &mask); - if (ret) - si_pi->sys_pcie_mask = 0; - else - si_pi->sys_pcie_mask = mask; + si_pi->sys_pcie_mask = + (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_MASK) >> + CAIL_PCIE_LINK_SPEED_SUPPORT_SHIFT; si_pi->force_pcie_gen = AMDGPU_PCIE_GEN_INVALID; si_pi->boot_pcie_gen = si_get_current_pcie_speed(adev); -- cgit v1.2.3 From c36aaba6d0f1c84921c07f036202af55fb86b9c1 Mon Sep 17 00:00:00 2001 From: Roman Li Date: Fri, 9 Feb 2018 16:57:38 -0500 Subject: drm/amd/display: Fix active dongle hotplug Clean fake sink flag after detecting link on downstream port. Fixing display light-up after "hot-unplug&plug again" downstream of an active dongle. Signed-off-by: Roman Li Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 862835dc054e..bf7c378818fc 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -1037,6 +1037,10 @@ static void handle_hpd_rx_irq(void *param) !is_mst_root_connector) { /* Downstream Port status changed. */ if (dc_link_detect(dc_link, DETECT_REASON_HPDRX)) { + + if (aconnector->fake_enable) + aconnector->fake_enable = false; + amdgpu_dm_update_connector_after_detect(aconnector); -- cgit v1.2.3 From f616f2830c1ed79245cfeca900f7e8a3b3c08c06 Mon Sep 17 00:00:00 2001 From: Lionel Landwerlin Date: Thu, 1 Mar 2018 11:06:13 +0000 Subject: drm/i915/perf: fix perf stream opening lock We're seeing on CI that some contexts don't have the programmed OA period timer that directs the OA unit on how often to write reports. The issue is that we're not holding the drm lock from when we edit the context images down to when we set the exclusive_stream variable. This leaves a window for the deferred context allocation to call i915_oa_init_reg_state() that will not program the expected OA timer value, because we haven't set the exclusive_stream yet. v2: Drop need_lock from gen8_configure_all_contexts() (Matt) Signed-off-by: Lionel Landwerlin Reviewed-by: Matthew Auld Reviewed-by: Chris Wilson Fixes: 701f8231a2f ("drm/i915/perf: prune OA configs") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102254 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103715 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103755 Link: https://patchwork.freedesktop.org/patch/msgid/20180301110613.1737-1-lionel.g.landwerlin@intel.com Cc: Jani Nikula Cc: Joonas Lahtinen Cc: Rodrigo Vivi Cc: intel-gfx@lists.freedesktop.org Cc: # v4.14+ (cherry picked from commit 41d3fdcd15d5ecf29cc73e8b79c2327ebb54b960) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/i915_perf.c | 40 +++++++++++++--------------------------- 1 file changed, 13 insertions(+), 27 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c index 0be50e43507d..f8fe5ffcdcff 100644 --- a/drivers/gpu/drm/i915/i915_perf.c +++ b/drivers/gpu/drm/i915/i915_perf.c @@ -1303,9 +1303,8 @@ static void i915_oa_stream_destroy(struct i915_perf_stream *stream) */ mutex_lock(&dev_priv->drm.struct_mutex); dev_priv->perf.oa.exclusive_stream = NULL; - mutex_unlock(&dev_priv->drm.struct_mutex); - dev_priv->perf.oa.ops.disable_metric_set(dev_priv); + mutex_unlock(&dev_priv->drm.struct_mutex); free_oa_buffer(dev_priv); @@ -1756,22 +1755,13 @@ static int gen8_switch_to_updated_kernel_context(struct drm_i915_private *dev_pr * Note: it's only the RCS/Render context that has any OA state. */ static int gen8_configure_all_contexts(struct drm_i915_private *dev_priv, - const struct i915_oa_config *oa_config, - bool interruptible) + const struct i915_oa_config *oa_config) { struct i915_gem_context *ctx; int ret; unsigned int wait_flags = I915_WAIT_LOCKED; - if (interruptible) { - ret = i915_mutex_lock_interruptible(&dev_priv->drm); - if (ret) - return ret; - - wait_flags |= I915_WAIT_INTERRUPTIBLE; - } else { - mutex_lock(&dev_priv->drm.struct_mutex); - } + lockdep_assert_held(&dev_priv->drm.struct_mutex); /* Switch away from any user context. */ ret = gen8_switch_to_updated_kernel_context(dev_priv, oa_config); @@ -1819,8 +1809,6 @@ static int gen8_configure_all_contexts(struct drm_i915_private *dev_priv, } out: - mutex_unlock(&dev_priv->drm.struct_mutex); - return ret; } @@ -1863,7 +1851,7 @@ static int gen8_enable_metric_set(struct drm_i915_private *dev_priv, * to make sure all slices/subslices are ON before writing to NOA * registers. */ - ret = gen8_configure_all_contexts(dev_priv, oa_config, true); + ret = gen8_configure_all_contexts(dev_priv, oa_config); if (ret) return ret; @@ -1878,7 +1866,7 @@ static int gen8_enable_metric_set(struct drm_i915_private *dev_priv, static void gen8_disable_metric_set(struct drm_i915_private *dev_priv) { /* Reset all contexts' slices/subslices configurations. */ - gen8_configure_all_contexts(dev_priv, NULL, false); + gen8_configure_all_contexts(dev_priv, NULL); I915_WRITE(GDT_CHICKEN_BITS, (I915_READ(GDT_CHICKEN_BITS) & ~GT_NOA_ENABLE)); @@ -1888,7 +1876,7 @@ static void gen8_disable_metric_set(struct drm_i915_private *dev_priv) static void gen10_disable_metric_set(struct drm_i915_private *dev_priv) { /* Reset all contexts' slices/subslices configurations. */ - gen8_configure_all_contexts(dev_priv, NULL, false); + gen8_configure_all_contexts(dev_priv, NULL); /* Make sure we disable noa to save power. */ I915_WRITE(RPM_CONFIG1, @@ -2138,6 +2126,10 @@ static int i915_oa_stream_init(struct i915_perf_stream *stream, if (ret) goto err_oa_buf_alloc; + ret = i915_mutex_lock_interruptible(&dev_priv->drm); + if (ret) + goto err_lock; + ret = dev_priv->perf.oa.ops.enable_metric_set(dev_priv, stream->oa_config); if (ret) @@ -2145,23 +2137,17 @@ static int i915_oa_stream_init(struct i915_perf_stream *stream, stream->ops = &i915_oa_stream_ops; - /* Lock device for exclusive_stream access late because - * enable_metric_set() might lock as well on gen8+. - */ - ret = i915_mutex_lock_interruptible(&dev_priv->drm); - if (ret) - goto err_lock; - dev_priv->perf.oa.exclusive_stream = stream; mutex_unlock(&dev_priv->drm.struct_mutex); return 0; -err_lock: +err_enable: dev_priv->perf.oa.ops.disable_metric_set(dev_priv); + mutex_unlock(&dev_priv->drm.struct_mutex); -err_enable: +err_lock: free_oa_buffer(dev_priv); err_oa_buf_alloc: -- cgit v1.2.3 From 88d3dfb6a69042381161290c7ce19e1f53fc2a66 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 2 Mar 2018 11:33:24 +0000 Subject: drm/i915: Suspend submission tasklets around wedging After staring hard at sequences like [ 28.199013] systemd-1 2..s. 26062228us : execlists_submission_tasklet: rcs0 cs-irq head=0 [0?], tail=1 [1?] [ 28.199095] systemd-1 2..s. 26062229us : execlists_submission_tasklet: rcs0 csb[1]: status=0x00000018:0x00000000, active=0x1 [ 28.199177] systemd-1 2..s. 26062230us : execlists_submission_tasklet: rcs0 out[0]: ctx=0.1, seqno=3, prio=-1024 [ 28.199258] systemd-1 2..s. 26062231us : execlists_submission_tasklet: rcs0 completed ctx=0 [ 28.199340] gem_eio-829 1..s1 26066853us : execlists_submission_tasklet: rcs0 in[0]: ctx=1.1, seqno=1, prio=0 [ 28.199421] -0 2..s. 26066863us : execlists_submission_tasklet: rcs0 cs-irq head=1 [1?], tail=2 [2?] [ 28.199503] -0 2..s. 26066865us : execlists_submission_tasklet: rcs0 csb[2]: status=0x00000001:0x00000000, active=0x1 [ 28.199585] gem_eio-829 1..s1 26067077us : execlists_submission_tasklet: rcs0 in[1]: ctx=3.1, seqno=2, prio=0 [ 28.199667] gem_eio-829 1..s1 26067078us : execlists_submission_tasklet: rcs0 in[0]: ctx=1.2, seqno=1, prio=0 [ 28.199749] -0 2..s. 26067084us : execlists_submission_tasklet: rcs0 cs-irq head=2 [2?], tail=3 [3?] [ 28.199830] -0 2..s. 26067085us : execlists_submission_tasklet: rcs0 csb[3]: status=0x00008002:0x00000001, active=0x1 [ 28.199912] -0 2..s. 26067086us : execlists_submission_tasklet: rcs0 out[0]: ctx=1.2, seqno=1, prio=0 [ 28.199994] gem_eio-829 2..s. 28246084us : execlists_submission_tasklet: rcs0 cs-irq head=3 [3?], tail=4 [4?] [ 28.200096] gem_eio-829 2..s. 28246088us : execlists_submission_tasklet: rcs0 csb[4]: status=0x00000014:0x00000001, active=0x5 [ 28.200178] gem_eio-829 2..s. 28246089us : execlists_submission_tasklet: rcs0 out[0]: ctx=0.0, seqno=0, prio=0 [ 28.200260] gem_eio-829 2..s. 28246127us : execlists_submission_tasklet: execlists_submission_tasklet:886 GEM_BUG_ON(buf[2 * head + 1] != port->context_id) the conclusion is that the only place where the ports are reset to zero, is from engine->cancel_requests called during i915_gem_set_wedged(). The race is horrible as it results from calling set-wedged on active HW (the GPU reset failed) and as such we need to be careful as the HW state changes beneath us. Fortunately, it's the same scary conditions as affect normal reset, so we can reuse the same machinery to disable state tracking as we clobber it. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104945 Signed-off-by: Chris Wilson Cc: Mika Kuoppala Cc: Michel Thierry Fixes: af7a8ffad9c5 ("drm/i915: Use rcu instead of stop_machine in set_wedged") Reviewed-by: Mika Kuoppala Link: https://patchwork.freedesktop.org/patch/msgid/20180302113324.23189-2-chris@chris-wilson.co.uk (cherry picked from commit 963ddd63c314e9b5d9cd999873d473a93aed5380) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/i915_gem.c | 6 +++++- drivers/gpu/drm/i915/intel_lrc.c | 5 +++++ 2 files changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index dd89abd2263d..66ee9d888d16 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3205,8 +3205,10 @@ void i915_gem_set_wedged(struct drm_i915_private *i915) * rolling the global seqno forward (since this would complete requests * for which we haven't set the fence error to EIO yet). */ - for_each_engine(engine, i915, id) + for_each_engine(engine, i915, id) { + i915_gem_reset_prepare_engine(engine); engine->submit_request = nop_submit_request; + } /* * Make sure no one is running the old callback before we proceed with @@ -3244,6 +3246,8 @@ void i915_gem_set_wedged(struct drm_i915_private *i915) intel_engine_init_global_seqno(engine, intel_engine_last_submit(engine)); spin_unlock_irqrestore(&engine->timeline->lock, flags); + + i915_gem_reset_finish_engine(engine); } set_bit(I915_WEDGED, &i915->gpu_error.flags); diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c index 7ece2f061b9e..e0fca035ff78 100644 --- a/drivers/gpu/drm/i915/intel_lrc.c +++ b/drivers/gpu/drm/i915/intel_lrc.c @@ -719,6 +719,8 @@ static void execlists_cancel_requests(struct intel_engine_cs *engine) struct rb_node *rb; unsigned long flags; + GEM_TRACE("%s\n", engine->name); + spin_lock_irqsave(&engine->timeline->lock, flags); /* Cancel the requests on the HW and clear the ELSP tracker. */ @@ -765,6 +767,9 @@ static void execlists_cancel_requests(struct intel_engine_cs *engine) */ clear_bit(ENGINE_IRQ_EXECLIST, &engine->irq_posted); + /* Mark all CS interrupts as complete */ + execlists->active = 0; + spin_unlock_irqrestore(&engine->timeline->lock, flags); } -- cgit v1.2.3 From e742a17cd360fbd64425a3c861c59062ec837f23 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 21 Feb 2018 13:57:01 +0100 Subject: drm/sun4i: tcon: Reduce the scope of the LVDS error a bit The current logic to deal with old DT missing the LVDS properties doesn't take into account whether the LVDS output is supported in the first place, resulting in spurious error messages on SoCs where it doesn't even matter. Introduce a new TCON flag to list if LVDS is supported at all to prevent this from happening. Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-1-maxime.ripard@bootlin.com --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 86 ++++++++++++++++++++------------------ drivers/gpu/drm/sun4i/sun4i_tcon.h | 1 + 2 files changed, 46 insertions(+), 41 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index ade197b1a9ac..2de586b7c98b 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -875,52 +875,56 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, return ret; } - /* - * This can only be made optional since we've had DT nodes - * without the LVDS reset properties. - * - * If the property is missing, just disable LVDS, and print a - * warning. - */ - tcon->lvds_rst = devm_reset_control_get_optional(dev, "lvds"); - if (IS_ERR(tcon->lvds_rst)) { - dev_err(dev, "Couldn't get our reset line\n"); - return PTR_ERR(tcon->lvds_rst); - } else if (tcon->lvds_rst) { - has_lvds_rst = true; - reset_control_reset(tcon->lvds_rst); - } else { - has_lvds_rst = false; - } + if (tcon->quirks->supports_lvds) { + /* + * This can only be made optional since we've had DT + * nodes without the LVDS reset properties. + * + * If the property is missing, just disable LVDS, and + * print a warning. + */ + tcon->lvds_rst = devm_reset_control_get_optional(dev, "lvds"); + if (IS_ERR(tcon->lvds_rst)) { + dev_err(dev, "Couldn't get our reset line\n"); + return PTR_ERR(tcon->lvds_rst); + } else if (tcon->lvds_rst) { + has_lvds_rst = true; + reset_control_reset(tcon->lvds_rst); + } else { + has_lvds_rst = false; + } - /* - * This can only be made optional since we've had DT nodes - * without the LVDS reset properties. - * - * If the property is missing, just disable LVDS, and print a - * warning. - */ - if (tcon->quirks->has_lvds_alt) { - tcon->lvds_pll = devm_clk_get(dev, "lvds-alt"); - if (IS_ERR(tcon->lvds_pll)) { - if (PTR_ERR(tcon->lvds_pll) == -ENOENT) { - has_lvds_alt = false; + /* + * This can only be made optional since we've had DT + * nodes without the LVDS reset properties. + * + * If the property is missing, just disable LVDS, and + * print a warning. + */ + if (tcon->quirks->has_lvds_alt) { + tcon->lvds_pll = devm_clk_get(dev, "lvds-alt"); + if (IS_ERR(tcon->lvds_pll)) { + if (PTR_ERR(tcon->lvds_pll) == -ENOENT) { + has_lvds_alt = false; + } else { + dev_err(dev, "Couldn't get the LVDS PLL\n"); + return PTR_ERR(tcon->lvds_pll); + } } else { - dev_err(dev, "Couldn't get the LVDS PLL\n"); - return PTR_ERR(tcon->lvds_pll); + has_lvds_alt = true; } - } else { - has_lvds_alt = true; } - } - if (!has_lvds_rst || (tcon->quirks->has_lvds_alt && !has_lvds_alt)) { - dev_warn(dev, - "Missing LVDS properties, Please upgrade your DT\n"); - dev_warn(dev, "LVDS output disabled\n"); - can_lvds = false; + if (!has_lvds_rst || + (tcon->quirks->has_lvds_alt && !has_lvds_alt)) { + dev_warn(dev, "Missing LVDS properties, Please upgrade your DT\n"); + dev_warn(dev, "LVDS output disabled\n"); + can_lvds = false; + } else { + can_lvds = true; + } } else { - can_lvds = true; + can_lvds = false; } ret = sun4i_tcon_init_clocks(dev, tcon); @@ -1139,7 +1143,7 @@ static const struct sun4i_tcon_quirks sun8i_a33_quirks = { }; static const struct sun4i_tcon_quirks sun8i_a83t_lcd_quirks = { - /* nothing is supported */ + .supports_lvds = true, }; static const struct sun4i_tcon_quirks sun8i_v3s_quirks = { diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h index b761c7b823c5..278700c7bf9f 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.h +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h @@ -175,6 +175,7 @@ struct sun4i_tcon_quirks { bool has_channel_1; /* a33 does not have channel 1 */ bool has_lvds_alt; /* Does the LVDS clock have a parent other than the TCON clock? */ bool needs_de_be_mux; /* sun6i needs mux to select backend */ + bool supports_lvds; /* Does the TCON support an LVDS output? */ /* callback to handle tcon muxing options */ int (*set_mux)(struct sun4i_tcon *, const struct drm_encoder *); -- cgit v1.2.3 From 5af894bd20fa16970378cae8ff55917294e0d9dd Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 21 Feb 2018 13:57:02 +0100 Subject: drm/sun4i: rgb: Fix potential division by zero In the case where mode_valid callback of our RGB connector was called before mode_set was being called, the range of dividers would not be set, resulting in a division by zero later on in the clk_round_rate logic. Set the range of dividers before calling clk_round_rate to fix this. Reviewed-by: Chen-Yu Tsai Tested-by: Giulio Benetti Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-2-maxime.ripard@bootlin.com --- drivers/gpu/drm/sun4i/sun4i_rgb.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/sun4i/sun4i_rgb.c b/drivers/gpu/drm/sun4i/sun4i_rgb.c index 832f8f9bc47f..b8da5a50a61d 100644 --- a/drivers/gpu/drm/sun4i/sun4i_rgb.c +++ b/drivers/gpu/drm/sun4i/sun4i_rgb.c @@ -92,6 +92,8 @@ static int sun4i_rgb_mode_valid(struct drm_connector *connector, DRM_DEBUG_DRIVER("Vertical parameters OK\n"); + tcon->dclk_min_div = 6; + tcon->dclk_max_div = 127; rounded_rate = clk_round_rate(tcon->dclk, rate); if (rounded_rate < rate) return MODE_CLOCK_LOW; -- cgit v1.2.3 From fd00c4ee76f0b509ce79ffbc1f5a682fbdd84efd Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 21 Feb 2018 13:57:03 +0100 Subject: drm/sun4i: crtc: Call drm_crtc_vblank_on / drm_crtc_vblank_off Make sure that the CRTC code will call the enable/disable_vblank hooks. Otherwise, since the refcounting will be off, we might end up in a situation where the vblank management functions are called while the CRTC is off. Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-3-maxime.ripard@bootlin.com --- drivers/gpu/drm/sun4i/sun4i_crtc.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/sun4i/sun4i_crtc.c b/drivers/gpu/drm/sun4i/sun4i_crtc.c index 5decae0069d0..78cbc3145e44 100644 --- a/drivers/gpu/drm/sun4i/sun4i_crtc.c +++ b/drivers/gpu/drm/sun4i/sun4i_crtc.c @@ -93,6 +93,8 @@ static void sun4i_crtc_atomic_disable(struct drm_crtc *crtc, DRM_DEBUG_DRIVER("Disabling the CRTC\n"); + drm_crtc_vblank_off(crtc); + sun4i_tcon_set_status(scrtc->tcon, encoder, false); if (crtc->state->event && !crtc->state->active) { @@ -113,6 +115,8 @@ static void sun4i_crtc_atomic_enable(struct drm_crtc *crtc, DRM_DEBUG_DRIVER("Enabling the CRTC\n"); sun4i_tcon_set_status(scrtc->tcon, encoder, true); + + drm_crtc_vblank_on(crtc); } static void sun4i_crtc_mode_set_nofb(struct drm_crtc *crtc) -- cgit v1.2.3 From 0b58d90f89545e021d188c289fa142e5ff9e708b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 1 Mar 2018 11:03:27 -0500 Subject: drm/radeon: fix KV harvesting MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Always set the graphics values to the max for the asic type. E.g., some 1 RB chips are actually 1 RB chips, others are actually harvested 2 RB chips. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=99353 Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/cik.c | 31 ++----------------------------- 1 file changed, 2 insertions(+), 29 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index d3045a371a55..7c73bc7e2f85 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -3221,35 +3221,8 @@ static void cik_gpu_init(struct radeon_device *rdev) case CHIP_KAVERI: rdev->config.cik.max_shader_engines = 1; rdev->config.cik.max_tile_pipes = 4; - if ((rdev->pdev->device == 0x1304) || - (rdev->pdev->device == 0x1305) || - (rdev->pdev->device == 0x130C) || - (rdev->pdev->device == 0x130F) || - (rdev->pdev->device == 0x1310) || - (rdev->pdev->device == 0x1311) || - (rdev->pdev->device == 0x131C)) { - rdev->config.cik.max_cu_per_sh = 8; - rdev->config.cik.max_backends_per_se = 2; - } else if ((rdev->pdev->device == 0x1309) || - (rdev->pdev->device == 0x130A) || - (rdev->pdev->device == 0x130D) || - (rdev->pdev->device == 0x1313) || - (rdev->pdev->device == 0x131D)) { - rdev->config.cik.max_cu_per_sh = 6; - rdev->config.cik.max_backends_per_se = 2; - } else if ((rdev->pdev->device == 0x1306) || - (rdev->pdev->device == 0x1307) || - (rdev->pdev->device == 0x130B) || - (rdev->pdev->device == 0x130E) || - (rdev->pdev->device == 0x1315) || - (rdev->pdev->device == 0x1318) || - (rdev->pdev->device == 0x131B)) { - rdev->config.cik.max_cu_per_sh = 4; - rdev->config.cik.max_backends_per_se = 1; - } else { - rdev->config.cik.max_cu_per_sh = 3; - rdev->config.cik.max_backends_per_se = 1; - } + rdev->config.cik.max_cu_per_sh = 8; + rdev->config.cik.max_backends_per_se = 2; rdev->config.cik.max_sh_per_se = 1; rdev->config.cik.max_texture_channel_caches = 4; rdev->config.cik.max_gprs = 256; -- cgit v1.2.3 From 545b0bcde7fbd3ee408fa842ea0731451dc4bd0a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 1 Mar 2018 11:05:31 -0500 Subject: drm/amdgpu: fix KV harvesting MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Always set the graphics values to the max for the asic type. E.g., some 1 RB chips are actually 1 RB chips, others are actually harvested 2 RB chips. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=99353 Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c | 30 ++---------------------------- 1 file changed, 2 insertions(+), 28 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c index a066c5eda135..a4309698e76c 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c @@ -4384,34 +4384,8 @@ static void gfx_v7_0_gpu_early_init(struct amdgpu_device *adev) case CHIP_KAVERI: adev->gfx.config.max_shader_engines = 1; adev->gfx.config.max_tile_pipes = 4; - if ((adev->pdev->device == 0x1304) || - (adev->pdev->device == 0x1305) || - (adev->pdev->device == 0x130C) || - (adev->pdev->device == 0x130F) || - (adev->pdev->device == 0x1310) || - (adev->pdev->device == 0x1311) || - (adev->pdev->device == 0x131C)) { - adev->gfx.config.max_cu_per_sh = 8; - adev->gfx.config.max_backends_per_se = 2; - } else if ((adev->pdev->device == 0x1309) || - (adev->pdev->device == 0x130A) || - (adev->pdev->device == 0x130D) || - (adev->pdev->device == 0x1313) || - (adev->pdev->device == 0x131D)) { - adev->gfx.config.max_cu_per_sh = 6; - adev->gfx.config.max_backends_per_se = 2; - } else if ((adev->pdev->device == 0x1306) || - (adev->pdev->device == 0x1307) || - (adev->pdev->device == 0x130B) || - (adev->pdev->device == 0x130E) || - (adev->pdev->device == 0x1315) || - (adev->pdev->device == 0x131B)) { - adev->gfx.config.max_cu_per_sh = 4; - adev->gfx.config.max_backends_per_se = 1; - } else { - adev->gfx.config.max_cu_per_sh = 3; - adev->gfx.config.max_backends_per_se = 1; - } + adev->gfx.config.max_cu_per_sh = 8; + adev->gfx.config.max_backends_per_se = 2; adev->gfx.config.max_sh_per_se = 1; adev->gfx.config.max_texture_channel_caches = 4; adev->gfx.config.max_gprs = 256; -- cgit v1.2.3 From 1bced75f4ab04bec55aecb57d99435dc6d0ae5a0 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 27 Feb 2018 18:20:53 +0800 Subject: drm/amdgpu: Notify sbios device ready before send request it is required if a platform supports PCIe root complex core voltage reduction. After receiving this notification, SBIOS can apply default PCIe root complex power policy. Reviewed-by: Alex Deucher Signed-off-by: Rex Zhu Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c index 57afad79f55d..8fa850a070e0 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c @@ -540,6 +540,9 @@ int amdgpu_acpi_pcie_performance_request(struct amdgpu_device *adev, size_t size; u32 retry = 3; + if (amdgpu_acpi_pcie_notify_device_ready(adev)) + return -EINVAL; + /* Get the device handle */ handle = ACPI_HANDLE(&adev->pdev->dev); if (!handle) -- cgit v1.2.3 From 3573d598b800f4979c78b829af3280af3d412ea3 Mon Sep 17 00:00:00 2001 From: Harry Wentland Date: Tue, 13 Feb 2018 11:07:43 -0500 Subject: drm/amd/display: Don't blow up if TG is NULL in dce110_vblank_set Signed-off-by: Harry Wentland Reviewed-by: Roman Li Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/irq/dce110/irq_service_dce110.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/dc/irq/dce110/irq_service_dce110.c b/drivers/gpu/drm/amd/display/dc/irq/dce110/irq_service_dce110.c index f7e40b292dfb..d3e1923b01a8 100644 --- a/drivers/gpu/drm/amd/display/dc/irq/dce110/irq_service_dce110.c +++ b/drivers/gpu/drm/amd/display/dc/irq/dce110/irq_service_dce110.c @@ -217,7 +217,7 @@ bool dce110_vblank_set( core_dc->current_state->res_ctx.pipe_ctx[pipe_offset].stream_res.tg; if (enable) { - if (!tg->funcs->arm_vert_intr(tg, 2)) { + if (!tg || !tg->funcs->arm_vert_intr(tg, 2)) { DC_ERROR("Failed to get VBLANK!\n"); return false; } -- cgit v1.2.3 From 843e3c7df6bdd68cb0551875023236cbfe8c4c9d Mon Sep 17 00:00:00 2001 From: Shirish S Date: Fri, 16 Feb 2018 11:44:22 +0530 Subject: drm/amd/display: defer modeset check in dm_update_planes_state amdgpu_dm_atomic_check() is used to validate the entire configuration of planes and crtc's that the user space wants to commit. However amdgpu_dm_atomic_check() depends upon DRM_MODE_ATOMIC_ALLOW_MODESET flag else its mostly dummy. Its not mandatory for the user space to set DRM_MODE_ATOMIC_ALLOW_MODESET, and in general its not set either along with DRM_MODE_ATOMIC_TEST_ONLY. Considering its importantance, this patch defers the allow_modeset check in dm_update_planes_state(), so that there shall be scope to validate the configuration sent from user space, without impacting the population of dc/dm related data structures. Signed-off-by: Shirish S Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index bf7c378818fc..19a37663df10 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -4636,8 +4636,6 @@ static int dm_update_planes_state(struct dc *dc, bool pflip_needed = !state->allow_modeset; int ret = 0; - if (pflip_needed) - return ret; /* Add new planes */ for_each_oldnew_plane_in_state(state, plane, old_plane_state, new_plane_state, i) { @@ -4652,6 +4650,8 @@ static int dm_update_planes_state(struct dc *dc, /* Remove any changed/removed planes */ if (!enable) { + if (pflip_needed) + continue; if (!old_plane_crtc) continue; @@ -4696,6 +4696,8 @@ static int dm_update_planes_state(struct dc *dc, if (!dm_new_crtc_state->stream) continue; + if (pflip_needed) + continue; WARN_ON(dm_new_plane_state->dc_state); -- cgit v1.2.3 From 10eee2e873ec8bc0cad6240d57d130e00edd6a9f Mon Sep 17 00:00:00 2001 From: Shirish S Date: Tue, 13 Feb 2018 14:11:37 +0530 Subject: drm/amd/display: validate plane in dce110 for scaling CZ & ST support uptil a limit 2:1 downscaling, this patch adds validate_plane hook, that shall be used to validate the plane attributes sent by the user space based on dce110 capabilities. Signed-off-by: Shirish S Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c index 7c4779578fb7..d5f851d74f5a 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c @@ -846,6 +846,16 @@ static bool dce110_validate_bandwidth( return result; } +enum dc_status dce110_validate_plane(const struct dc_plane_state *plane_state, + struct dc_caps *caps) +{ + if (((plane_state->dst_rect.width * 2) < plane_state->src_rect.width) || + ((plane_state->dst_rect.height * 2) < plane_state->src_rect.height)) + return DC_FAIL_SURFACE_VALIDATE; + + return DC_OK; +} + static bool dce110_validate_surface_sets( struct dc_state *context) { @@ -1021,6 +1031,7 @@ static const struct resource_funcs dce110_res_pool_funcs = { .link_enc_create = dce110_link_encoder_create, .validate_guaranteed = dce110_validate_guaranteed, .validate_bandwidth = dce110_validate_bandwidth, + .validate_plane = dce110_validate_plane, .acquire_idle_pipe_for_layer = dce110_acquire_underlay, .add_stream_to_ctx = dce110_add_stream_to_ctx, .validate_global = dce110_validate_global -- cgit v1.2.3 From 5449e07caa3a246c4ec79213978e70097e8b52aa Mon Sep 17 00:00:00 2001 From: Shirish S Date: Tue, 13 Feb 2018 14:15:17 +0530 Subject: drm/amd/display: update plane params before validation This patch updates the dc's plane state with the parameters set by the user side. This is needed to validate the plane capabilities with the parameters user space wants to set. Signed-off-by: Shirish S Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 19a37663df10..d8d0f2cb5590 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -3064,6 +3064,9 @@ static int dm_plane_atomic_check(struct drm_plane *plane, if (!dm_plane_state->dc_state) return 0; + if (!fill_rects_from_plane_state(state, dm_plane_state->dc_state)) + return -EINVAL; + if (dc_validate_plane(dc, dm_plane_state->dc_state) == DC_OK) return 0; -- cgit v1.2.3 From caf0a9030d75509f3cacefe466d6d69d26e3dee6 Mon Sep 17 00:00:00 2001 From: Harry Wentland Date: Tue, 20 Feb 2018 13:36:23 -0500 Subject: drm/amd/display: Default HDMI6G support to true. Log VBIOS table error. There have been many reports of Ellesmere and Baffin systems not being able to drive HDMI 4k60 due to the fact that we check the HDMI_6GB_EN bit from VBIOS table. Windows seems to not have this issue. On some systems we fail to the encoder cap info from VBIOS. In that case we should default to enabling HDMI6G support. This was tested by dwagner on https://bugs.freedesktop.org/show_bug.cgi?id=102820 Signed-off-by: Harry Wentland Reviewed-by: Roman Li Reviewed-by: Tony Cheng Acked-by: Harry Wentland Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c index a266e3f5e75f..d886328f2b9c 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c @@ -683,6 +683,7 @@ void dce110_link_encoder_construct( { struct bp_encoder_cap_info bp_cap_info = {0}; const struct dc_vbios_funcs *bp_funcs = init_data->ctx->dc_bios->funcs; + enum bp_result result = BP_RESULT_OK; enc110->base.funcs = &dce110_lnk_enc_funcs; enc110->base.ctx = init_data->ctx; @@ -757,15 +758,24 @@ void dce110_link_encoder_construct( enc110->base.preferred_engine = ENGINE_ID_UNKNOWN; } + /* default to one to mirror Windows behavior */ + enc110->base.features.flags.bits.HDMI_6GB_EN = 1; + + result = bp_funcs->get_encoder_cap_info(enc110->base.ctx->dc_bios, + enc110->base.id, &bp_cap_info); + /* Override features with DCE-specific values */ - if (BP_RESULT_OK == bp_funcs->get_encoder_cap_info( - enc110->base.ctx->dc_bios, enc110->base.id, - &bp_cap_info)) { + if (BP_RESULT_OK == result) { enc110->base.features.flags.bits.IS_HBR2_CAPABLE = bp_cap_info.DP_HBR2_EN; enc110->base.features.flags.bits.IS_HBR3_CAPABLE = bp_cap_info.DP_HBR3_EN; enc110->base.features.flags.bits.HDMI_6GB_EN = bp_cap_info.HDMI_6GB_EN; + } else { + dm_logger_write(enc110->base.ctx->logger, LOG_WARNING, + "%s: Failed to get encoder_cap_info from VBIOS with error code %d!\n", + __func__, + result); } } -- cgit v1.2.3 From 3c27b3f41391125e4037b24371df72c792cad0fb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Fri, 23 Feb 2018 12:29:04 +0100 Subject: drm/amdgpu/dce6: Use DRM_DEBUG instead of DRM_INFO for HPD IRQ info MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For consistency with other DCE generations. HPD IRQs appear to be working fine. Reviewed-by: Alex Deucher Signed-off-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/dce_v6_0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c index bd2c4f727df6..a712f4b285f6 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c @@ -3093,7 +3093,7 @@ static int dce_v6_0_hpd_irq(struct amdgpu_device *adev, tmp |= DC_HPD1_INT_CONTROL__DC_HPD1_INT_ACK_MASK; WREG32(mmDC_HPD1_INT_CONTROL + hpd_offsets[hpd], tmp); schedule_work(&adev->hotplug_work); - DRM_INFO("IH: HPD%d\n", hpd + 1); + DRM_DEBUG("IH: HPD%d\n", hpd + 1); } return 0; -- cgit v1.2.3 From 36cc549d59864b7161f0e23d710c1c4d1b9cf022 Mon Sep 17 00:00:00 2001 From: Shirish S Date: Wed, 28 Feb 2018 12:14:58 +0530 Subject: drm/amd/display: disable CRTCs with NULL FB on their primary plane (V2) The below commit "drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2" introduces a slight behavioral change to rmfb. Instead of disabling a crtc when the primary plane is disabled, it now preserves it. This change leads to BUG hit while performing atomic commit on amd driver. As a fix this patch ensures that we disable the CRTC's with NULL FB by returning -EINVAL and hence triggering fall back to the old behavior and turning off the crtc in atomic_remove_fb(). V2: Added error check for plane_state and removed sanity check for crtc. Signed-off-by: Shirish S Signed-off-by: Pratik Vishwakarma Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 28 +++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index d8d0f2cb5590..23d1efb66c0f 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -4746,6 +4746,30 @@ static int dm_update_planes_state(struct dc *dc, return ret; } +static int dm_atomic_check_plane_state_fb(struct drm_atomic_state *state, + struct drm_crtc *crtc) +{ + struct drm_plane *plane; + struct drm_crtc_state *crtc_state; + + WARN_ON(!drm_atomic_get_new_crtc_state(state, crtc)); + + drm_for_each_plane_mask(plane, state->dev, crtc->state->plane_mask) { + struct drm_plane_state *plane_state = + drm_atomic_get_plane_state(state, plane); + + if (IS_ERR(plane_state)) + return -EDEADLK; + + crtc_state = drm_atomic_get_crtc_state(plane_state->state, crtc); + if (crtc->primary == plane && crtc_state->active) { + if (!plane_state->fb) + return -EINVAL; + } + } + return 0; +} + static int amdgpu_dm_atomic_check(struct drm_device *dev, struct drm_atomic_state *state) { @@ -4769,6 +4793,10 @@ static int amdgpu_dm_atomic_check(struct drm_device *dev, goto fail; for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { + ret = dm_atomic_check_plane_state_fb(state, crtc); + if (ret) + goto fail; + if (!drm_atomic_crtc_needs_modeset(new_crtc_state) && !new_crtc_state->color_mgmt_changed) continue; -- cgit v1.2.3 From 1c7571fb29c33f90639d477d24514609cd738cd9 Mon Sep 17 00:00:00 2001 From: "Jerry (Fangzhi) Zuo" Date: Tue, 12 Dec 2017 17:33:57 -0500 Subject: drm/amd/display: Fix topology change issue in MST rehook When topology changed and rehook up MST display to the same DP connector, need to take care of drm_dp_mst_port object. Due to the topology is changed, drm_dp_mst_port and corresponding i2c_algorithm object could be NULL in such situation. Signed-off-by: Jerry (Fangzhi) Zuo Reviewed-by: Roman Li Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c index f3d87f418d2e..93421dad21bd 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c @@ -189,6 +189,12 @@ void dm_dp_mst_dc_sink_create(struct drm_connector *connector) .link = aconnector->dc_link, .sink_signal = SIGNAL_TYPE_DISPLAY_PORT_MST }; + /* + * TODO: Need to further figure out why ddc.algo is NULL while MST port exists + */ + if (!aconnector->port || !aconnector->port->aux.ddc.algo) + return; + edid = drm_dp_mst_get_edid(connector, &aconnector->mst_port->mst_mgr, aconnector->port); if (!edid) { -- cgit v1.2.3 From 0c813535ee448239d3bf08451381da29e117efed Mon Sep 17 00:00:00 2001 From: Roman Li Date: Fri, 15 Dec 2017 17:18:19 -0500 Subject: drm/amd/display: Fix FBC topology change With FBC enabled there was a potential null-deref on topology change due to hardcorded pipe index. Signed-off-by: Roman Li Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- .../amd/display/dc/dce110/dce110_hw_sequencer.c | 23 ++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index 86cdd7b4811f..9353872b4eca 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -1690,9 +1690,13 @@ static void apply_min_clocks( * Check if FBC can be enabled */ static bool should_enable_fbc(struct dc *dc, - struct dc_state *context) + struct dc_state *context, + uint32_t *pipe_idx) { - struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[0]; + uint32_t i; + struct pipe_ctx *pipe_ctx = NULL; + struct resource_context *res_ctx = &context->res_ctx; + ASSERT(dc->fbc_compressor); @@ -1704,6 +1708,14 @@ static bool should_enable_fbc(struct dc *dc, if (context->stream_count != 1) return false; + for (i = 0; i < dc->res_pool->pipe_count; i++) { + if (res_ctx->pipe_ctx[i].stream) { + pipe_ctx = &res_ctx->pipe_ctx[i]; + *pipe_idx = i; + break; + } + } + /* Only supports eDP */ if (pipe_ctx->stream->sink->link->connector_signal != SIGNAL_TYPE_EDP) return false; @@ -1729,11 +1741,14 @@ static bool should_enable_fbc(struct dc *dc, static void enable_fbc(struct dc *dc, struct dc_state *context) { - if (should_enable_fbc(dc, context)) { + uint32_t pipe_idx = 0; + + if (should_enable_fbc(dc, context, &pipe_idx)) { /* Program GRPH COMPRESSED ADDRESS and PITCH */ struct compr_addr_and_pitch_params params = {0, 0, 0}; struct compressor *compr = dc->fbc_compressor; - struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[0]; + struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[pipe_idx]; + params.source_view_width = pipe_ctx->stream->timing.h_addressable; params.source_view_height = pipe_ctx->stream->timing.v_addressable; -- cgit v1.2.3 From 855b5cba0da4c8165fbf2c884f5d3167df6e1ddd Mon Sep 17 00:00:00 2001 From: Harry Wentland Date: Mon, 4 Dec 2017 20:58:16 -0500 Subject: drm/amd/display: Move MAX_TMDS_CLOCK define to header Signed-off-by: Harry Wentland Reviewed-by: Tony Cheng Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 3 --- drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c | 7 ------- drivers/gpu/drm/amd/display/include/grph_object_ctrl_defs.h | 5 ----- drivers/gpu/drm/amd/display/include/signal_types.h | 5 +++++ 4 files changed, 5 insertions(+), 15 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c index 95b8dd0e53c6..4d07ffebfd31 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c @@ -1360,9 +1360,6 @@ bool dc_is_stream_scaling_unchanged( return true; } -/* Maximum TMDS single link pixel clock 165MHz */ -#define TMDS_MAX_PIXEL_CLOCK_IN_KHZ 165000 - static void update_stream_engine_usage( struct resource_context *res_ctx, const struct resource_pool *pool, diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c index d886328f2b9c..1c7627c8b842 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c @@ -82,13 +82,6 @@ #define DCE110_DIG_FE_SOURCE_SELECT_DIGF 0x20 #define DCE110_DIG_FE_SOURCE_SELECT_DIGG 0x40 -/* Minimum pixel clock, in KHz. For TMDS signal is 25.00 MHz */ -#define TMDS_MIN_PIXEL_CLOCK 25000 -/* Maximum pixel clock, in KHz. For TMDS signal is 165.00 MHz */ -#define TMDS_MAX_PIXEL_CLOCK 165000 -/* For current ASICs pixel clock - 600MHz */ -#define MAX_ENCODER_CLOCK 600000 - enum { DP_MST_UPDATE_MAX_RETRY = 50 }; diff --git a/drivers/gpu/drm/amd/display/include/grph_object_ctrl_defs.h b/drivers/gpu/drm/amd/display/include/grph_object_ctrl_defs.h index 7a9b43f84a31..36bbad594267 100644 --- a/drivers/gpu/drm/amd/display/include/grph_object_ctrl_defs.h +++ b/drivers/gpu/drm/amd/display/include/grph_object_ctrl_defs.h @@ -419,11 +419,6 @@ struct bios_event_info { bool backlight_changed; }; -enum { - HDMI_PIXEL_CLOCK_IN_KHZ_297 = 297000, - TMDS_PIXEL_CLOCK_IN_KHZ_165 = 165000 -}; - /* * DFS-bypass flag */ diff --git a/drivers/gpu/drm/amd/display/include/signal_types.h b/drivers/gpu/drm/amd/display/include/signal_types.h index b5ebde642207..199c5db67cbc 100644 --- a/drivers/gpu/drm/amd/display/include/signal_types.h +++ b/drivers/gpu/drm/amd/display/include/signal_types.h @@ -26,6 +26,11 @@ #ifndef __DC_SIGNAL_TYPES_H__ #define __DC_SIGNAL_TYPES_H__ +/* Minimum pixel clock, in KHz. For TMDS signal is 25.00 MHz */ +#define TMDS_MIN_PIXEL_CLOCK 25000 +/* Maximum pixel clock, in KHz. For TMDS signal is 165.00 MHz */ +#define TMDS_MAX_PIXEL_CLOCK 165000 + enum signal_type { SIGNAL_TYPE_NONE = 0L, /* no signal */ SIGNAL_TYPE_DVI_SINGLE_LINK = (1 << 0), -- cgit v1.2.3 From 0b395ddbce101459080d9e4b1932d179b36b4e7a Mon Sep 17 00:00:00 2001 From: Harry Wentland Date: Mon, 18 Dec 2017 13:46:19 -0500 Subject: drm/amd/display: Remove unnecessary fail labels in create_stream_for_sink Signed-off-by: Harry Wentland Reviewed-by: Tony Cheng Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 23d1efb66c0f..e635db87a1a0 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -2364,12 +2364,12 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector, if (aconnector == NULL) { DRM_ERROR("aconnector is NULL!\n"); - goto drm_connector_null; + return stream; } if (dm_state == NULL) { DRM_ERROR("dm_state is NULL!\n"); - goto dm_state_null; + return stream; } drm_connector = &aconnector->base; @@ -2381,18 +2381,18 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector, */ if (aconnector->mst_port) { dm_dp_mst_dc_sink_create(drm_connector); - goto mst_dc_sink_create_done; + return stream; } if (create_fake_sink(aconnector)) - goto stream_create_fail; + return stream; } stream = dc_create_stream_for_sink(aconnector->dc_sink); if (stream == NULL) { DRM_ERROR("Failed to create stream for sink!\n"); - goto stream_create_fail; + return stream; } list_for_each_entry(preferred_mode, &aconnector->base.modes, head) { @@ -2430,10 +2430,6 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector, drm_connector, aconnector->dc_sink); -stream_create_fail: -dm_state_null: -drm_connector_null: -mst_dc_sink_create_done: return stream; } -- cgit v1.2.3 From 35c4c88ce8da738b1a9ade239f84dad181f2cf9f Mon Sep 17 00:00:00 2001 From: Harry Wentland Date: Mon, 18 Dec 2017 11:57:28 -0500 Subject: drm/amd/display: Pass signal directly to enable_tmds_output This makes the check for HDMI and dual-link DVI a bit more straightforward. Signed-off-by: Harry Wentland Reviewed-by: Tony Cheng Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 3 +-- drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c | 15 +++++---------- drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.h | 3 +-- drivers/gpu/drm/amd/display/dc/inc/hw/link_encoder.h | 3 +-- .../gpu/drm/amd/display/dc/virtual/virtual_link_encoder.c | 3 +-- 5 files changed, 9 insertions(+), 18 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c index a37428271573..be5546181fa8 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c @@ -1749,8 +1749,7 @@ static void enable_link_hdmi(struct pipe_ctx *pipe_ctx) link->link_enc, pipe_ctx->clock_source->id, display_color_depth, - pipe_ctx->stream->signal == SIGNAL_TYPE_HDMI_TYPE_A, - pipe_ctx->stream->signal == SIGNAL_TYPE_DVI_DUAL_LINK, + pipe_ctx->stream->signal, stream->phy_pix_clk); if (pipe_ctx->stream->signal == SIGNAL_TYPE_HDMI_TYPE_A) diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c index 1c7627c8b842..e4741f1a2b01 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c @@ -907,8 +907,7 @@ void dce110_link_encoder_enable_tmds_output( struct link_encoder *enc, enum clock_source_id clock_source, enum dc_color_depth color_depth, - bool hdmi, - bool dual_link, + enum signal_type signal, uint32_t pixel_clock) { struct dce110_link_encoder *enc110 = TO_DCE110_LINK_ENC(enc); @@ -922,16 +921,12 @@ void dce110_link_encoder_enable_tmds_output( cntl.engine_id = enc->preferred_engine; cntl.transmitter = enc110->base.transmitter; cntl.pll_id = clock_source; - if (hdmi) { - cntl.signal = SIGNAL_TYPE_HDMI_TYPE_A; - cntl.lanes_number = 4; - } else if (dual_link) { - cntl.signal = SIGNAL_TYPE_DVI_DUAL_LINK; + cntl.signal = signal; + if (cntl.signal == SIGNAL_TYPE_DVI_DUAL_LINK) cntl.lanes_number = 8; - } else { - cntl.signal = SIGNAL_TYPE_DVI_SINGLE_LINK; + else cntl.lanes_number = 4; - } + cntl.hpd_sel = enc110->base.hpd_source; cntl.pixel_clock = pixel_clock; diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.h b/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.h index 8ca9afe47a2b..0ec3433d34b6 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.h +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.h @@ -210,8 +210,7 @@ void dce110_link_encoder_enable_tmds_output( struct link_encoder *enc, enum clock_source_id clock_source, enum dc_color_depth color_depth, - bool hdmi, - bool dual_link, + enum signal_type signal, uint32_t pixel_clock); /* enables DP PHY output */ diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/link_encoder.h b/drivers/gpu/drm/amd/display/dc/inc/hw/link_encoder.h index 0fd329deacd8..54d8a1386142 100644 --- a/drivers/gpu/drm/amd/display/dc/inc/hw/link_encoder.h +++ b/drivers/gpu/drm/amd/display/dc/inc/hw/link_encoder.h @@ -123,8 +123,7 @@ struct link_encoder_funcs { void (*enable_tmds_output)(struct link_encoder *enc, enum clock_source_id clock_source, enum dc_color_depth color_depth, - bool hdmi, - bool dual_link, + enum signal_type signal, uint32_t pixel_clock); void (*enable_dp_output)(struct link_encoder *enc, const struct dc_link_settings *link_settings, diff --git a/drivers/gpu/drm/amd/display/dc/virtual/virtual_link_encoder.c b/drivers/gpu/drm/amd/display/dc/virtual/virtual_link_encoder.c index 57a54a7b89e5..1c079ba37c30 100644 --- a/drivers/gpu/drm/amd/display/dc/virtual/virtual_link_encoder.c +++ b/drivers/gpu/drm/amd/display/dc/virtual/virtual_link_encoder.c @@ -42,8 +42,7 @@ static void virtual_link_encoder_enable_tmds_output( struct link_encoder *enc, enum clock_source_id clock_source, enum dc_color_depth color_depth, - bool hdmi, - bool dual_link, + enum signal_type signal, uint32_t pixel_clock) {} static void virtual_link_encoder_enable_dp_output( -- cgit v1.2.3 From 6724eebac4c45741334bc459296cdddb59904a36 Mon Sep 17 00:00:00 2001 From: Harry Wentland Date: Tue, 19 Dec 2017 16:17:22 -0500 Subject: drm/amd/display: Don't allow dual-link DVI on all ASICs. Our APUs (Carrizo, Stoney, Raven) don't support it. v2: Don't use is_apu as other ASICs might also not support it Signed-off-by: Harry Wentland Reviewed-by: Tony Cheng Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_stream.c | 5 +++-- drivers/gpu/drm/amd/display/dc/dc.h | 1 + drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c | 1 + drivers/gpu/drm/amd/display/dc/dce112/dce112_resource.c | 2 ++ drivers/gpu/drm/amd/display/dc/dce120/dce120_resource.c | 2 ++ drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c | 1 + 6 files changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c index 539c3e0a6292..651c6bceb86d 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c @@ -45,8 +45,9 @@ static void update_stream_signal(struct dc_stream_state *stream) stream->signal = dc_sink->sink_signal; if (dc_is_dvi_signal(stream->signal)) { - if (stream->timing.pix_clk_khz > TMDS_MAX_PIXEL_CLOCK_IN_KHZ_UPMOST && - stream->sink->sink_signal != SIGNAL_TYPE_DVI_SINGLE_LINK) + if (stream->ctx->dc->caps.dual_link_dvi && + stream->timing.pix_clk_khz > TMDS_MAX_PIXEL_CLOCK_IN_KHZ_UPMOST && + stream->sink->sink_signal != SIGNAL_TYPE_DVI_SINGLE_LINK) stream->signal = SIGNAL_TYPE_DVI_DUAL_LINK; else stream->signal = SIGNAL_TYPE_DVI_SINGLE_LINK; diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h index e2e3c9df79ea..b5c8f510adb0 100644 --- a/drivers/gpu/drm/amd/display/dc/dc.h +++ b/drivers/gpu/drm/amd/display/dc/dc.h @@ -62,6 +62,7 @@ struct dc_caps { bool dcc_const_color; bool dynamic_audio; bool is_apu; + bool dual_link_dvi; }; struct dc_dcc_surface_param { diff --git a/drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c b/drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c index 3ea43e2a9450..442dd2d93618 100644 --- a/drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c @@ -852,6 +852,7 @@ static bool construct( dc->caps.max_downscale_ratio = 200; dc->caps.i2c_speed_in_khz = 40; dc->caps.max_cursor_size = 128; + dc->caps.dual_link_dvi = true; for (i = 0; i < pool->base.pipe_count; i++) { pool->base.timing_generators[i] = diff --git a/drivers/gpu/drm/amd/display/dc/dce112/dce112_resource.c b/drivers/gpu/drm/amd/display/dc/dce112/dce112_resource.c index 663e0a047a4b..98d9cd0109e1 100644 --- a/drivers/gpu/drm/amd/display/dc/dce112/dce112_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dce112/dce112_resource.c @@ -1103,6 +1103,8 @@ static bool construct( dc->caps.max_downscale_ratio = 200; dc->caps.i2c_speed_in_khz = 100; dc->caps.max_cursor_size = 128; + dc->caps.dual_link_dvi = true; + /************************************************* * Create resources * diff --git a/drivers/gpu/drm/amd/display/dc/dce120/dce120_resource.c b/drivers/gpu/drm/amd/display/dc/dce120/dce120_resource.c index 57cd67359567..5aab01db28ee 100644 --- a/drivers/gpu/drm/amd/display/dc/dce120/dce120_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dce120/dce120_resource.c @@ -835,6 +835,8 @@ static bool construct( dc->caps.max_downscale_ratio = 200; dc->caps.i2c_speed_in_khz = 100; dc->caps.max_cursor_size = 128; + dc->caps.dual_link_dvi = true; + dc->debug = debug_defaults; /************************************************* diff --git a/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c b/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c index 8f2bd56f3461..25d7eb1567ae 100644 --- a/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c @@ -793,6 +793,7 @@ static bool dce80_construct( dc->caps.max_downscale_ratio = 200; dc->caps.i2c_speed_in_khz = 40; dc->caps.max_cursor_size = 128; + dc->caps.dual_link_dvi = true; /************************************************* * Create resources * -- cgit v1.2.3 From db195488661ef397fe1a3af745a11aa2d1b20940 Mon Sep 17 00:00:00 2001 From: Harry Wentland Date: Mon, 18 Dec 2017 14:36:01 -0500 Subject: drm/amd/display: Don't block dual-link DVI modes Signed-off-by: Harry Wentland Reviewed-by: Tony Cheng Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_stream.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c index 651c6bceb86d..cbf3fc19a5f7 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c @@ -33,7 +33,6 @@ /******************************************************************************* * Private functions ******************************************************************************/ -#define TMDS_MAX_PIXEL_CLOCK_IN_KHZ_UPMOST 297000 static void update_stream_signal(struct dc_stream_state *stream) { @@ -46,7 +45,7 @@ static void update_stream_signal(struct dc_stream_state *stream) if (dc_is_dvi_signal(stream->signal)) { if (stream->ctx->dc->caps.dual_link_dvi && - stream->timing.pix_clk_khz > TMDS_MAX_PIXEL_CLOCK_IN_KHZ_UPMOST && + stream->timing.pix_clk_khz > TMDS_MAX_PIXEL_CLOCK && stream->sink->sink_signal != SIGNAL_TYPE_DVI_SINGLE_LINK) stream->signal = SIGNAL_TYPE_DVI_DUAL_LINK; else -- cgit v1.2.3 From 52f401f9019975350bfd53e00026772fccde63fe Mon Sep 17 00:00:00 2001 From: Harry Wentland Date: Mon, 18 Dec 2017 13:48:12 -0500 Subject: drm/amd/display: Make create_stream_for_sink more consistent We've got a helper function to call dc_create_stream_for_sink and one other place that calls it directly. Make sure we call the helper functions always since we need to update a bunch of things in stream and don't want to miss that. Signed-off-by: Harry Wentland Reviewed-by: Tony Cheng Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 53 +++++++++++------------ 1 file changed, 25 insertions(+), 28 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index e635db87a1a0..ce541f53c22d 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -2016,30 +2016,32 @@ static void update_stream_scaling_settings(const struct drm_display_mode *mode, dst.width = stream->timing.h_addressable; dst.height = stream->timing.v_addressable; - rmx_type = dm_state->scaling; - if (rmx_type == RMX_ASPECT || rmx_type == RMX_OFF) { - if (src.width * dst.height < - src.height * dst.width) { - /* height needs less upscaling/more downscaling */ - dst.width = src.width * - dst.height / src.height; - } else { - /* width needs less upscaling/more downscaling */ - dst.height = src.height * - dst.width / src.width; + if (dm_state) { + rmx_type = dm_state->scaling; + if (rmx_type == RMX_ASPECT || rmx_type == RMX_OFF) { + if (src.width * dst.height < + src.height * dst.width) { + /* height needs less upscaling/more downscaling */ + dst.width = src.width * + dst.height / src.height; + } else { + /* width needs less upscaling/more downscaling */ + dst.height = src.height * + dst.width / src.width; + } + } else if (rmx_type == RMX_CENTER) { + dst = src; } - } else if (rmx_type == RMX_CENTER) { - dst = src; - } - dst.x = (stream->timing.h_addressable - dst.width) / 2; - dst.y = (stream->timing.v_addressable - dst.height) / 2; + dst.x = (stream->timing.h_addressable - dst.width) / 2; + dst.y = (stream->timing.v_addressable - dst.height) / 2; - if (dm_state->underscan_enable) { - dst.x += dm_state->underscan_hborder / 2; - dst.y += dm_state->underscan_vborder / 2; - dst.width -= dm_state->underscan_hborder; - dst.height -= dm_state->underscan_vborder; + if (dm_state->underscan_enable) { + dst.x += dm_state->underscan_hborder / 2; + dst.y += dm_state->underscan_vborder / 2; + dst.width -= dm_state->underscan_hborder; + dst.height -= dm_state->underscan_vborder; + } } stream->src = src; @@ -2367,11 +2369,6 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector, return stream; } - if (dm_state == NULL) { - DRM_ERROR("dm_state is NULL!\n"); - return stream; - } - drm_connector = &aconnector->base; if (!aconnector->dc_sink) { @@ -2418,7 +2415,7 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector, } else { decide_crtc_timing_for_drm_display_mode( &mode, preferred_mode, - dm_state->scaling != RMX_OFF); + dm_state ? (dm_state->scaling != RMX_OFF) : false); } fill_stream_properties_from_drm_display_mode(stream, @@ -2800,7 +2797,7 @@ int amdgpu_dm_connector_mode_valid(struct drm_connector *connector, goto fail; } - stream = dc_create_stream_for_sink(dc_sink); + stream = create_stream_for_sink(aconnector, mode, NULL); if (stream == NULL) { DRM_ERROR("Failed to create stream for sink!\n"); goto fail; -- cgit v1.2.3 From 3549130ef7f6ec732a7770ea0ac36231be85a089 Mon Sep 17 00:00:00 2001 From: Harry Wentland Date: Mon, 18 Dec 2017 12:01:30 -0500 Subject: drm/amd/display: Call update_stream_signal directly from amdgpu_dm There's no good place in DC to cover all place where stream signal should be updated. update_stream_signal depends on timing which comes from DM. Signed-off-by: Harry Wentland Reviewed-by: Tony Cheng Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +++ drivers/gpu/drm/amd/display/dc/core/dc_stream.c | 2 +- drivers/gpu/drm/amd/display/dc/dc_stream.h | 2 ++ 3 files changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index ce541f53c22d..6045825c11d2 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -2418,6 +2418,7 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector, dm_state ? (dm_state->scaling != RMX_OFF) : false); } + drm_mode_set_crtcinfo(&mode, 0); fill_stream_properties_from_drm_display_mode(stream, &mode, &aconnector->base); update_stream_scaling_settings(&mode, dm_state, stream); @@ -2427,6 +2428,8 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector, drm_connector, aconnector->dc_sink); + update_stream_signal(stream); + return stream; } diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c index cbf3fc19a5f7..fe0fa52a9fd2 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c @@ -33,7 +33,7 @@ /******************************************************************************* * Private functions ******************************************************************************/ -static void update_stream_signal(struct dc_stream_state *stream) +void update_stream_signal(struct dc_stream_state *stream) { struct dc_sink *dc_sink = stream->sink; diff --git a/drivers/gpu/drm/amd/display/dc/dc_stream.h b/drivers/gpu/drm/amd/display/dc/dc_stream.h index 01c60f11b2bd..456e4d29eadd 100644 --- a/drivers/gpu/drm/amd/display/dc/dc_stream.h +++ b/drivers/gpu/drm/amd/display/dc/dc_stream.h @@ -237,6 +237,8 @@ enum surface_update_type dc_check_update_surfaces_for_stream( */ struct dc_stream_state *dc_create_stream_for_sink(struct dc_sink *dc_sink); +void update_stream_signal(struct dc_stream_state *stream); + void dc_stream_retain(struct dc_stream_state *dc_stream); void dc_stream_release(struct dc_stream_state *dc_stream); -- cgit v1.2.3 From 4a2df0d1f28eba7bd49ad1a1527af996f54df137 Mon Sep 17 00:00:00 2001 From: "Jerry (Fangzhi) Zuo" Date: Wed, 17 Jan 2018 13:24:28 -0500 Subject: drm/amd/display: Fixed non-native modes not lighting up There is no need to call drm_mode_set_crtcinfo() again once crtc timing is decided. Otherwise non-native/unsupported timing might get overwritten. Signed-off-by: Jerry (Fangzhi) Zuo Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 6045825c11d2..2016400434b1 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -2418,7 +2418,9 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector, dm_state ? (dm_state->scaling != RMX_OFF) : false); } - drm_mode_set_crtcinfo(&mode, 0); + if (!dm_state) + drm_mode_set_crtcinfo(&mode, 0); + fill_stream_properties_from_drm_display_mode(stream, &mode, &aconnector->base); update_stream_scaling_settings(&mode, dm_state, stream); -- cgit v1.2.3 From 43b9d27360cbf51ec4fced5bf00c40cf37bba10d Mon Sep 17 00:00:00 2001 From: Mikita Lipski Date: Thu, 18 Jan 2018 14:53:57 -0500 Subject: drm/amd/display: Set irq state only on existing crtcs Because AMDGPU_CRTC_IRQ_VLINE1 = 6, it expected 6 more crtcs to be programed with disabled irq state in amdgpu_irq_disable_all. That caused errors and accessed the wrong memory location. Signed-off-by: Mikita Lipski Reviewed-by: Tony Cheng Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c index 1874b6cee6af..422055080df4 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c @@ -683,10 +683,8 @@ static const struct amdgpu_irq_src_funcs dm_hpd_irq_funcs = { void amdgpu_dm_set_irq_funcs(struct amdgpu_device *adev) { - if (adev->mode_info.num_crtc > 0) - adev->crtc_irq.num_types = AMDGPU_CRTC_IRQ_VLINE1 + adev->mode_info.num_crtc; - else - adev->crtc_irq.num_types = 0; + + adev->crtc_irq.num_types = adev->mode_info.num_crtc; adev->crtc_irq.funcs = &dm_crtc_irq_funcs; adev->pageflip_irq.num_types = adev->mode_info.num_crtc; -- cgit v1.2.3 From 39b485e4dddb9c801616cb6632ea2d4f646780a2 Mon Sep 17 00:00:00 2001 From: Eric Yang Date: Thu, 18 Jan 2018 19:07:54 -0500 Subject: drm/amd/display: fix cursor related Pstate hang Move cursor programming to inside the OTG_MASTER_UPDATE_LOCK If graphics plane go from 1 pipe to hsplit, the cursor updates after mpc programming and unlock. Which means there is a window of time where cursor is enabled on the wrong pipe if it's on the right side of the screen (i.e. case where cursor need to move from pipe 0 to pipe 3 post split). This will cause pstate hang. Solution is to program the cursor while still locked. Signed-off-by: Eric Yang Reviewed-by: Tony Cheng Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_stream.c | 68 ++-------------------- .../amd/display/dc/dce110/dce110_hw_sequencer.c | 40 +++++++++++++ .../drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 45 +++++++++++++- drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h | 3 + 4 files changed, 90 insertions(+), 66 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c index fe0fa52a9fd2..cd5819789d76 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c @@ -193,6 +193,7 @@ bool dc_stream_set_cursor_attributes( core_dc = stream->ctx->dc; res_ctx = &core_dc->current_state->res_ctx; + stream->cursor_attributes = *attributes; for (i = 0; i < MAX_PIPES; i++) { struct pipe_ctx *pipe_ctx = &res_ctx->pipe_ctx[i]; @@ -204,34 +205,8 @@ bool dc_stream_set_cursor_attributes( continue; - if (pipe_ctx->plane_res.ipp->funcs->ipp_cursor_set_attributes != NULL) - pipe_ctx->plane_res.ipp->funcs->ipp_cursor_set_attributes( - pipe_ctx->plane_res.ipp, attributes); - - if (pipe_ctx->plane_res.hubp != NULL && - pipe_ctx->plane_res.hubp->funcs->set_cursor_attributes != NULL) - pipe_ctx->plane_res.hubp->funcs->set_cursor_attributes( - pipe_ctx->plane_res.hubp, attributes); - - if (pipe_ctx->plane_res.mi != NULL && - pipe_ctx->plane_res.mi->funcs->set_cursor_attributes != NULL) - pipe_ctx->plane_res.mi->funcs->set_cursor_attributes( - pipe_ctx->plane_res.mi, attributes); - - - if (pipe_ctx->plane_res.xfm != NULL && - pipe_ctx->plane_res.xfm->funcs->set_cursor_attributes != NULL) - pipe_ctx->plane_res.xfm->funcs->set_cursor_attributes( - pipe_ctx->plane_res.xfm, attributes); - - if (pipe_ctx->plane_res.dpp != NULL && - pipe_ctx->plane_res.dpp->funcs->set_cursor_attributes != NULL) - pipe_ctx->plane_res.dpp->funcs->set_cursor_attributes( - pipe_ctx->plane_res.dpp, attributes->color_format); + core_dc->hwss.set_cursor_attribute(pipe_ctx); } - - stream->cursor_attributes = *attributes; - return true; } @@ -255,21 +230,10 @@ bool dc_stream_set_cursor_position( core_dc = stream->ctx->dc; res_ctx = &core_dc->current_state->res_ctx; + stream->cursor_position = *position; for (i = 0; i < MAX_PIPES; i++) { struct pipe_ctx *pipe_ctx = &res_ctx->pipe_ctx[i]; - struct input_pixel_processor *ipp = pipe_ctx->plane_res.ipp; - struct mem_input *mi = pipe_ctx->plane_res.mi; - struct hubp *hubp = pipe_ctx->plane_res.hubp; - struct dpp *dpp = pipe_ctx->plane_res.dpp; - struct dc_cursor_position pos_cpy = *position; - struct dc_cursor_mi_param param = { - .pixel_clk_khz = stream->timing.pix_clk_khz, - .ref_clk_khz = core_dc->res_pool->ref_clock_inKhz, - .viewport_x_start = pipe_ctx->plane_res.scl_data.viewport.x, - .viewport_width = pipe_ctx->plane_res.scl_data.viewport.width, - .h_scale_ratio = pipe_ctx->plane_res.scl_data.ratios.horz - }; if (pipe_ctx->stream != stream || (!pipe_ctx->plane_res.mi && !pipe_ctx->plane_res.hubp) || @@ -278,33 +242,9 @@ bool dc_stream_set_cursor_position( !pipe_ctx->plane_res.ipp) continue; - if (pipe_ctx->plane_state->address.type - == PLN_ADDR_TYPE_VIDEO_PROGRESSIVE) - pos_cpy.enable = false; - - if (pipe_ctx->top_pipe && pipe_ctx->plane_state != pipe_ctx->top_pipe->plane_state) - pos_cpy.enable = false; - - - if (ipp != NULL && ipp->funcs->ipp_cursor_set_position != NULL) - ipp->funcs->ipp_cursor_set_position(ipp, &pos_cpy, ¶m); - - if (mi != NULL && mi->funcs->set_cursor_position != NULL) - mi->funcs->set_cursor_position(mi, &pos_cpy, ¶m); - - if (!hubp) - continue; - - if (hubp->funcs->set_cursor_position != NULL) - hubp->funcs->set_cursor_position(hubp, &pos_cpy, ¶m); - - if (dpp != NULL && dpp->funcs->set_cursor_position != NULL) - dpp->funcs->set_cursor_position(dpp, &pos_cpy, ¶m, hubp->curs_attr.width); - + core_dc->hwss.set_cursor_position(pipe_ctx); } - stream->cursor_position = *position; - return true; } diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index 9353872b4eca..e7e3028fa5d5 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -2930,6 +2930,44 @@ static void program_csc_matrix(struct pipe_ctx *pipe_ctx, } } +void dce110_set_cursor_position(struct pipe_ctx *pipe_ctx) +{ + struct dc_cursor_position pos_cpy = pipe_ctx->stream->cursor_position; + struct input_pixel_processor *ipp = pipe_ctx->plane_res.ipp; + struct mem_input *mi = pipe_ctx->plane_res.mi; + struct dc_cursor_mi_param param = { + .pixel_clk_khz = pipe_ctx->stream->timing.pix_clk_khz, + .ref_clk_khz = pipe_ctx->stream->ctx->dc->res_pool->ref_clock_inKhz, + .viewport_x_start = pipe_ctx->plane_res.scl_data.viewport.x, + .viewport_width = pipe_ctx->plane_res.scl_data.viewport.width, + .h_scale_ratio = pipe_ctx->plane_res.scl_data.ratios.horz + }; + + if (pipe_ctx->plane_state->address.type + == PLN_ADDR_TYPE_VIDEO_PROGRESSIVE) + pos_cpy.enable = false; + + if (pipe_ctx->top_pipe && pipe_ctx->plane_state != pipe_ctx->top_pipe->plane_state) + pos_cpy.enable = false; + + ipp->funcs->ipp_cursor_set_position(ipp, &pos_cpy, ¶m); + mi->funcs->set_cursor_position(mi, &pos_cpy, ¶m); +} + +void dce110_set_cursor_attribute(struct pipe_ctx *pipe_ctx) +{ + struct dc_cursor_attributes *attributes = &pipe_ctx->stream->cursor_attributes; + + pipe_ctx->plane_res.ipp->funcs->ipp_cursor_set_attributes( + pipe_ctx->plane_res.ipp, attributes); + + pipe_ctx->plane_res.mi->funcs->set_cursor_attributes( + pipe_ctx->plane_res.mi, attributes); + + pipe_ctx->plane_res.xfm->funcs->set_cursor_attributes( + pipe_ctx->plane_res.xfm, attributes); +} + static void ready_shared_resources(struct dc *dc, struct dc_state *context) {} static void optimize_shared_resources(struct dc *dc) {} @@ -2972,6 +3010,8 @@ static const struct hw_sequencer_funcs dce110_funcs = { .edp_backlight_control = hwss_edp_backlight_control, .edp_power_control = hwss_edp_power_control, .edp_wait_for_hpd_ready = hwss_edp_wait_for_hpd_ready, + .set_cursor_position = dce110_set_cursor_position, + .set_cursor_attribute = dce110_set_cursor_attribute }; void dce110_hw_sequencer_construct(struct dc *dc) diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c index 82572863acab..7b959fa2351e 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c @@ -1761,6 +1761,11 @@ static void update_dchubp_dpp( &pipe_ctx->plane_res.scl_data.viewport_c); } + if (pipe_ctx->stream->cursor_attributes.address.quad_part != 0) { + dc->hwss.set_cursor_position(pipe_ctx); + dc->hwss.set_cursor_attribute(pipe_ctx); + } + if (plane_state->update_flags.bits.full_update) { /*gamut remap*/ program_gamut_remap(pipe_ctx); @@ -2296,7 +2301,7 @@ static bool dcn10_dummy_display_power_gating( return true; } -void dcn10_update_pending_status(struct pipe_ctx *pipe_ctx) +static void dcn10_update_pending_status(struct pipe_ctx *pipe_ctx) { struct dc_plane_state *plane_state = pipe_ctx->plane_state; struct timing_generator *tg = pipe_ctx->stream_res.tg; @@ -2316,12 +2321,46 @@ void dcn10_update_pending_status(struct pipe_ctx *pipe_ctx) } } -void dcn10_update_dchub(struct dce_hwseq *hws, struct dchub_init_data *dh_data) +static void dcn10_update_dchub(struct dce_hwseq *hws, struct dchub_init_data *dh_data) { if (hws->ctx->dc->res_pool->hubbub != NULL) hubbub1_update_dchub(hws->ctx->dc->res_pool->hubbub, dh_data); } +static void dcn10_set_cursor_position(struct pipe_ctx *pipe_ctx) +{ + struct dc_cursor_position pos_cpy = pipe_ctx->stream->cursor_position; + struct hubp *hubp = pipe_ctx->plane_res.hubp; + struct dpp *dpp = pipe_ctx->plane_res.dpp; + struct dc_cursor_mi_param param = { + .pixel_clk_khz = pipe_ctx->stream->timing.pix_clk_khz, + .ref_clk_khz = pipe_ctx->stream->ctx->dc->res_pool->ref_clock_inKhz, + .viewport_x_start = pipe_ctx->plane_res.scl_data.viewport.x, + .viewport_width = pipe_ctx->plane_res.scl_data.viewport.width, + .h_scale_ratio = pipe_ctx->plane_res.scl_data.ratios.horz + }; + + if (pipe_ctx->plane_state->address.type + == PLN_ADDR_TYPE_VIDEO_PROGRESSIVE) + pos_cpy.enable = false; + + if (pipe_ctx->top_pipe && pipe_ctx->plane_state != pipe_ctx->top_pipe->plane_state) + pos_cpy.enable = false; + + hubp->funcs->set_cursor_position(hubp, &pos_cpy, ¶m); + dpp->funcs->set_cursor_position(dpp, &pos_cpy, ¶m, hubp->curs_attr.width); +} + +static void dcn10_set_cursor_attribute(struct pipe_ctx *pipe_ctx) +{ + struct dc_cursor_attributes *attributes = &pipe_ctx->stream->cursor_attributes; + + pipe_ctx->plane_res.hubp->funcs->set_cursor_attributes( + pipe_ctx->plane_res.hubp, attributes); + pipe_ctx->plane_res.dpp->funcs->set_cursor_attributes( + pipe_ctx->plane_res.dpp, attributes->color_format); +} + static const struct hw_sequencer_funcs dcn10_funcs = { .program_gamut_remap = program_gamut_remap, .program_csc_matrix = program_csc_matrix, @@ -2362,6 +2401,8 @@ static const struct hw_sequencer_funcs dcn10_funcs = { .edp_backlight_control = hwss_edp_backlight_control, .edp_power_control = hwss_edp_power_control, .edp_wait_for_hpd_ready = hwss_edp_wait_for_hpd_ready, + .set_cursor_position = dcn10_set_cursor_position, + .set_cursor_attribute = dcn10_set_cursor_attribute }; diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h b/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h index 4c0aa56f7bae..379c6ecd271a 100644 --- a/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h +++ b/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h @@ -198,6 +198,9 @@ struct hw_sequencer_funcs { bool enable); void (*edp_wait_for_hpd_ready)(struct dc_link *link, bool power_up); + void (*set_cursor_position)(struct pipe_ctx *pipe); + void (*set_cursor_attribute)(struct pipe_ctx *pipe); + }; void color_space_to_black_color( -- cgit v1.2.3 From 8378fc7e48f2f2b167b5eff9de2d4a76cc1d0ca9 Mon Sep 17 00:00:00 2001 From: Roman Li Date: Tue, 23 Jan 2018 11:12:27 -0500 Subject: drm/amd/display: fix boot-up on vega10 Fixing null-deref on Vega10 due to regression after 'fix cursor related Pstate hang' change. Added null checks in setting cursor position. Signed-off-by: Roman Li Reviewed-by: Eric Yang Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- .../drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index e7e3028fa5d5..dd1f206332ef 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -2950,22 +2950,27 @@ void dce110_set_cursor_position(struct pipe_ctx *pipe_ctx) if (pipe_ctx->top_pipe && pipe_ctx->plane_state != pipe_ctx->top_pipe->plane_state) pos_cpy.enable = false; - ipp->funcs->ipp_cursor_set_position(ipp, &pos_cpy, ¶m); - mi->funcs->set_cursor_position(mi, &pos_cpy, ¶m); + if (ipp->funcs->ipp_cursor_set_position) + ipp->funcs->ipp_cursor_set_position(ipp, &pos_cpy, ¶m); + if (mi->funcs->set_cursor_position) + mi->funcs->set_cursor_position(mi, &pos_cpy, ¶m); } void dce110_set_cursor_attribute(struct pipe_ctx *pipe_ctx) { struct dc_cursor_attributes *attributes = &pipe_ctx->stream->cursor_attributes; - pipe_ctx->plane_res.ipp->funcs->ipp_cursor_set_attributes( + if (pipe_ctx->plane_res.ipp->funcs->ipp_cursor_set_attributes) + pipe_ctx->plane_res.ipp->funcs->ipp_cursor_set_attributes( pipe_ctx->plane_res.ipp, attributes); - pipe_ctx->plane_res.mi->funcs->set_cursor_attributes( - pipe_ctx->plane_res.mi, attributes); + if (pipe_ctx->plane_res.mi->funcs->set_cursor_attributes) + pipe_ctx->plane_res.mi->funcs->set_cursor_attributes( + pipe_ctx->plane_res.mi, attributes); - pipe_ctx->plane_res.xfm->funcs->set_cursor_attributes( - pipe_ctx->plane_res.xfm, attributes); + if (pipe_ctx->plane_res.xfm->funcs->set_cursor_attributes) + pipe_ctx->plane_res.xfm->funcs->set_cursor_attributes( + pipe_ctx->plane_res.xfm, attributes); } static void ready_shared_resources(struct dc *dc, struct dc_state *context) {} -- cgit v1.2.3 From db941f2412882b05b8bcdc26c75860dfa0e08d2e Mon Sep 17 00:00:00 2001 From: Eric Yang Date: Wed, 21 Feb 2018 16:37:16 -0500 Subject: drm/amd/display: update infoframe after dig fe is turned on Before dig fe is enabled, infoframe can't be programmed. So in suspend resume case our infoframe programmming was not going through. This change changes the sequence so that infoframe is programmed after. Signed-off-by: Eric Yang Reviewed-by: Tony Cheng Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- .../amd/display/dc/dce110/dce110_hw_sequencer.c | 23 ++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index dd1f206332ef..6f382a3ac90f 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -688,15 +688,22 @@ void dce110_enable_stream(struct pipe_ctx *pipe_ctx) struct dc_crtc_timing *timing = &pipe_ctx->stream->timing; struct dc_link *link = pipe_ctx->stream->sink->link; - /* 1. update AVI info frame (HDMI, DP) - * we always need to update info frame - */ + uint32_t active_total_with_borders; uint32_t early_control = 0; struct timing_generator *tg = pipe_ctx->stream_res.tg; - /* TODOFPGA may change to hwss.update_info_frame */ + /* For MST, there are multiply stream go to only one link. + * connect DIG back_end to front_end while enable_stream and + * disconnect them during disable_stream + * BY this, it is logic clean to separate stream and link */ + link->link_enc->funcs->connect_dig_be_to_fe(link->link_enc, + pipe_ctx->stream_res.stream_enc->id, true); + + /* update AVI info frame (HDMI, DP)*/ + /* TODO: FPGA may change to hwss.update_info_frame */ dce110_update_info_frame(pipe_ctx); + /* enable early control to avoid corruption on DP monitor*/ active_total_with_borders = timing->h_addressable @@ -717,12 +724,8 @@ void dce110_enable_stream(struct pipe_ctx *pipe_ctx) pipe_ctx->stream_res.stream_enc->funcs->dp_audio_enable(pipe_ctx->stream_res.stream_enc); } - /* For MST, there are multiply stream go to only one link. - * connect DIG back_end to front_end while enable_stream and - * disconnect them during disable_stream - * BY this, it is logic clean to separate stream and link */ - link->link_enc->funcs->connect_dig_be_to_fe(link->link_enc, - pipe_ctx->stream_res.stream_enc->id, true); + + } -- cgit v1.2.3 From c0ec56449dda8ec057292dcab8eac79b936ad186 Mon Sep 17 00:00:00 2001 From: Harry Wentland Date: Tue, 13 Feb 2018 10:54:26 -0500 Subject: drm/amd/display: Use crtc enable/disable_vblank hooks Signed-off-by: Harry Wentland Reviewed-by: Tony Cheng Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 24 +++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 2016400434b1..79c11acdbea1 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -2499,6 +2499,28 @@ dm_crtc_duplicate_state(struct drm_crtc *crtc) return &state->base; } + +static inline int dm_set_vblank(struct drm_crtc *crtc, bool enable) +{ + enum dc_irq_source irq_source; + struct amdgpu_crtc *acrtc = to_amdgpu_crtc(crtc); + struct amdgpu_device *adev = crtc->dev->dev_private; + + irq_source = IRQ_TYPE_VBLANK + acrtc->otg_inst; + dc_interrupt_set(adev->dm.dc, irq_source, enable); + return 0; +} + +static int dm_enable_vblank(struct drm_crtc *crtc) +{ + return dm_set_vblank(crtc, true); +} + +static void dm_disable_vblank(struct drm_crtc *crtc) +{ + dm_set_vblank(crtc, false); +} + /* Implemented only the options currently availible for the driver */ static const struct drm_crtc_funcs amdgpu_dm_crtc_funcs = { .reset = dm_crtc_reset_state, @@ -2508,6 +2530,8 @@ static const struct drm_crtc_funcs amdgpu_dm_crtc_funcs = { .page_flip = drm_atomic_helper_page_flip, .atomic_duplicate_state = dm_crtc_duplicate_state, .atomic_destroy_state = dm_crtc_destroy_state, + .enable_vblank = dm_enable_vblank, + .disable_vblank = dm_disable_vblank, }; static enum drm_connector_status -- cgit v1.2.3 From c0e463d3a02a54bdb272f9e52c5942348234c40e Mon Sep 17 00:00:00 2001 From: Harry Wentland Date: Tue, 13 Feb 2018 11:03:01 -0500 Subject: drm/amd/display: Return success when enabling interrupt Signed-off-by: Harry Wentland Reviewed-by: Roman Li Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +-- drivers/gpu/drm/amd/display/dc/core/dc.c | 6 +++--- drivers/gpu/drm/amd/display/dc/dc.h | 2 +- 3 files changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 79c11acdbea1..710286b69cba 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -2507,8 +2507,7 @@ static inline int dm_set_vblank(struct drm_crtc *crtc, bool enable) struct amdgpu_device *adev = crtc->dev->dev_private; irq_source = IRQ_TYPE_VBLANK + acrtc->otg_inst; - dc_interrupt_set(adev->dm.dc, irq_source, enable); - return 0; + return dc_interrupt_set(adev->dm.dc, irq_source, enable) ? 0 : -EBUSY; } static int dm_enable_vblank(struct drm_crtc *crtc) diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c index 35e84ed031de..12868c769606 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c @@ -1358,13 +1358,13 @@ enum dc_irq_source dc_interrupt_to_irq_source( return dal_irq_service_to_irq_source(dc->res_pool->irqs, src_id, ext_id); } -void dc_interrupt_set(struct dc *dc, enum dc_irq_source src, bool enable) +bool dc_interrupt_set(struct dc *dc, enum dc_irq_source src, bool enable) { if (dc == NULL) - return; + return false; - dal_irq_service_set(dc->res_pool->irqs, src, enable); + return dal_irq_service_set(dc->res_pool->irqs, src, enable); } void dc_interrupt_ack(struct dc *dc, enum dc_irq_source src) diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h index b5c8f510adb0..d6d56611604e 100644 --- a/drivers/gpu/drm/amd/display/dc/dc.h +++ b/drivers/gpu/drm/amd/display/dc/dc.h @@ -673,7 +673,7 @@ enum dc_irq_source dc_interrupt_to_irq_source( struct dc *dc, uint32_t src_id, uint32_t ext_id); -void dc_interrupt_set(struct dc *dc, enum dc_irq_source src, bool enable); +bool dc_interrupt_set(struct dc *dc, enum dc_irq_source src, bool enable); void dc_interrupt_ack(struct dc *dc, enum dc_irq_source src); enum dc_irq_source dc_get_hpd_irq_source_at_index( struct dc *dc, uint32_t link_index); -- cgit v1.2.3 From 9fe8f03bc0227fb573cc3e5b99eb34e19e405ab6 Mon Sep 17 00:00:00 2001 From: "Leo (Sunpeng) Li" Date: Tue, 20 Feb 2018 15:46:09 -0500 Subject: drm/amd/display: Fix memleaks when atomic check fails. While checking plane states for updates during atomic check, we create dc_plane_states in preparation. These dc states should be freed if something errors. Although the input transfer function is also freed by dc_plane_state_release(), we should free it (on error) under the same scope as where it is created. Signed-off-by: Leo (Sunpeng) Li Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 31 +++++++++++++++-------- 1 file changed, 21 insertions(+), 10 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 710286b69cba..c345e645f1d7 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -4707,6 +4707,7 @@ static int dm_update_planes_state(struct dc *dc, *lock_and_validation_needed = true; } else { /* Add new planes */ + struct dc_plane_state *dc_new_plane_state; if (drm_atomic_plane_disabling(plane->state, new_plane_state)) continue; @@ -4725,35 +4726,45 @@ static int dm_update_planes_state(struct dc *dc, WARN_ON(dm_new_plane_state->dc_state); - dm_new_plane_state->dc_state = dc_create_plane_state(dc); - - DRM_DEBUG_DRIVER("Enabling DRM plane: %d on DRM crtc %d\n", - plane->base.id, new_plane_crtc->base.id); - - if (!dm_new_plane_state->dc_state) { + dc_new_plane_state = dc_create_plane_state(dc); + if (!dc_new_plane_state) { ret = -EINVAL; return ret; } + DRM_DEBUG_DRIVER("Enabling DRM plane: %d on DRM crtc %d\n", + plane->base.id, new_plane_crtc->base.id); + ret = fill_plane_attributes( new_plane_crtc->dev->dev_private, - dm_new_plane_state->dc_state, + dc_new_plane_state, new_plane_state, new_crtc_state); - if (ret) + if (ret) { + dc_plane_state_release(dc_new_plane_state); return ret; + } - + /* + * Any atomic check errors that occur after this will + * not need a release. The plane state will be attached + * to the stream, and therefore part of the atomic + * state. It'll be released when the atomic state is + * cleaned. + */ if (!dc_add_plane_to_context( dc, dm_new_crtc_state->stream, - dm_new_plane_state->dc_state, + dc_new_plane_state, dm_state->context)) { + dc_plane_state_release(dc_new_plane_state); ret = -EINVAL; return ret; } + dm_new_plane_state->dc_state = dc_new_plane_state; + /* Tell DC to do a full surface update every time there * is a plane change. Inefficient, but works for now. */ -- cgit v1.2.3 From bd9bc355be45dd2295ca746aa05b058be4cf94cc Mon Sep 17 00:00:00 2001 From: Bhawanpreet Lakha Date: Tue, 27 Feb 2018 12:12:46 -0500 Subject: drm/amd/display: Fix takover from VGA mode HW Engineer's Notes: During switch from vga->extended, if we set the VGA_TEST_ENABLE and then hit the VGA_TEST_RENDER_START, then the DCHUBP timing gets updated correctly. Then vBIOS will have it poll for the VGA_TEST_RENDER_DONE and unset VGA_TEST_ENABLE, to leave it in the same state as before. Signed-off-by: Bhawanpreet Lakha Reviewed-by: Tony Cheng Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h | 10 ++++++++-- drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 10 ++++++++++ 2 files changed, 18 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h b/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h index b73db9e78437..ad7131d6f821 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h @@ -236,6 +236,7 @@ SR(D2VGA_CONTROL), \ SR(D3VGA_CONTROL), \ SR(D4VGA_CONTROL), \ + SR(VGA_TEST_CONTROL), \ SR(DC_IP_REQUEST_CNTL), \ BL_REG_LIST() @@ -337,6 +338,7 @@ struct dce_hwseq_registers { uint32_t D2VGA_CONTROL; uint32_t D3VGA_CONTROL; uint32_t D4VGA_CONTROL; + uint32_t VGA_TEST_CONTROL; /* MMHUB registers. read only. temporary hack */ uint32_t VM_CONTEXT0_PAGE_TABLE_BASE_ADDR_HI32; uint32_t VM_CONTEXT0_PAGE_TABLE_BASE_ADDR_LO32; @@ -494,7 +496,9 @@ struct dce_hwseq_registers { HWS_SF(, DOMAIN7_PG_STATUS, DOMAIN7_PGFSM_PWR_STATUS, mask_sh), \ HWS_SF(, DC_IP_REQUEST_CNTL, IP_REQUEST_EN, mask_sh), \ HWS_SF(, LVTMA_PWRSEQ_CNTL, LVTMA_BLON, mask_sh), \ - HWS_SF(, LVTMA_PWRSEQ_STATE, LVTMA_PWRSEQ_TARGET_STATE_R, mask_sh) + HWS_SF(, LVTMA_PWRSEQ_STATE, LVTMA_PWRSEQ_TARGET_STATE_R, mask_sh), \ + HWS_SF(, VGA_TEST_CONTROL, VGA_TEST_ENABLE, mask_sh),\ + HWS_SF(, VGA_TEST_CONTROL, VGA_TEST_RENDER_START, mask_sh) #define HWSEQ_REG_FIELD_LIST(type) \ type DCFE_CLOCK_ENABLE; \ @@ -583,7 +587,9 @@ struct dce_hwseq_registers { type DCFCLK_GATE_DIS; \ type DCHUBBUB_GLOBAL_TIMER_REFDIV; \ type DENTIST_DPPCLK_WDIVIDER; \ - type DENTIST_DISPCLK_WDIVIDER; + type DENTIST_DISPCLK_WDIVIDER; \ + type VGA_TEST_ENABLE; \ + type VGA_TEST_RENDER_START; struct dce_hwseq_shift { HWSEQ_REG_FIELD_LIST(uint8_t) diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c index 7b959fa2351e..f07a8a3d5c25 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c @@ -242,6 +242,16 @@ static void disable_vga( REG_WRITE(D2VGA_CONTROL, 0); REG_WRITE(D3VGA_CONTROL, 0); REG_WRITE(D4VGA_CONTROL, 0); + + /* HW Engineer's Notes: + * During switch from vga->extended, if we set the VGA_TEST_ENABLE and + * then hit the VGA_TEST_RENDER_START, then the DCHUBP timing gets updated correctly. + * + * Then vBIOS will have it poll for the VGA_TEST_RENDER_DONE and unset + * VGA_TEST_ENABLE, to leave it in the same state as before. + */ + REG_UPDATE(VGA_TEST_CONTROL, VGA_TEST_ENABLE, 1); + REG_UPDATE(VGA_TEST_CONTROL, VGA_TEST_RENDER_START, 1); } static void dpp_pg_control( -- cgit v1.2.3 From abca24007e0838ee8bfff37a188bf8df00703c52 Mon Sep 17 00:00:00 2001 From: Eric Yang Date: Wed, 28 Feb 2018 14:45:36 -0500 Subject: drm/amd/display: early return if not in vga mode in disable_vga The work around for hw bug causes S3 resume failure. Don't execute disable vga logic if not in vga mode. Signed-off-by: Eric Yang Reviewed-by: Tony Cheng Acked-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h | 10 ++++++---- drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 10 +++++++--- 2 files changed, 13 insertions(+), 7 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h b/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h index ad7131d6f821..a993279a8f2d 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h @@ -495,10 +495,11 @@ struct dce_hwseq_registers { HWS_SF(, DOMAIN6_PG_STATUS, DOMAIN6_PGFSM_PWR_STATUS, mask_sh), \ HWS_SF(, DOMAIN7_PG_STATUS, DOMAIN7_PGFSM_PWR_STATUS, mask_sh), \ HWS_SF(, DC_IP_REQUEST_CNTL, IP_REQUEST_EN, mask_sh), \ - HWS_SF(, LVTMA_PWRSEQ_CNTL, LVTMA_BLON, mask_sh), \ - HWS_SF(, LVTMA_PWRSEQ_STATE, LVTMA_PWRSEQ_TARGET_STATE_R, mask_sh), \ + HWS_SF(, D1VGA_CONTROL, D1VGA_MODE_ENABLE, mask_sh),\ HWS_SF(, VGA_TEST_CONTROL, VGA_TEST_ENABLE, mask_sh),\ - HWS_SF(, VGA_TEST_CONTROL, VGA_TEST_RENDER_START, mask_sh) + HWS_SF(, VGA_TEST_CONTROL, VGA_TEST_RENDER_START, mask_sh),\ + HWS_SF(, LVTMA_PWRSEQ_CNTL, LVTMA_BLON, mask_sh), \ + HWS_SF(, LVTMA_PWRSEQ_STATE, LVTMA_PWRSEQ_TARGET_STATE_R, mask_sh) #define HWSEQ_REG_FIELD_LIST(type) \ type DCFE_CLOCK_ENABLE; \ @@ -589,7 +590,8 @@ struct dce_hwseq_registers { type DENTIST_DPPCLK_WDIVIDER; \ type DENTIST_DISPCLK_WDIVIDER; \ type VGA_TEST_ENABLE; \ - type VGA_TEST_RENDER_START; + type VGA_TEST_RENDER_START; \ + type D1VGA_MODE_ENABLE; struct dce_hwseq_shift { HWSEQ_REG_FIELD_LIST(uint8_t) diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c index f07a8a3d5c25..072e4485e85e 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c @@ -238,10 +238,14 @@ static void enable_power_gating_plane( static void disable_vga( struct dce_hwseq *hws) { + unsigned int in_vga_mode = 0; + + REG_GET(D1VGA_CONTROL, D1VGA_MODE_ENABLE, &in_vga_mode); + + if (in_vga_mode == 0) + return; + REG_WRITE(D1VGA_CONTROL, 0); - REG_WRITE(D2VGA_CONTROL, 0); - REG_WRITE(D3VGA_CONTROL, 0); - REG_WRITE(D4VGA_CONTROL, 0); /* HW Engineer's Notes: * During switch from vga->extended, if we set the VGA_TEST_ENABLE and -- cgit v1.2.3 From 0e5ee33d2a54e4c55fe92857f23e1cbb0440d6de Mon Sep 17 00:00:00 2001 From: James Zhu Date: Tue, 6 Mar 2018 14:43:50 -0500 Subject: drm/amdgpu:Correct max uvd handles MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Max uvd handles should use adev->uvd.max_handles instead of AMDGPU_MAX_UVD_HANDLES here. Signed-off-by: James Zhu Reviewed-by: Leo Liu Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c index b2eae86bf906..6fe155f4d4ab 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c @@ -303,7 +303,7 @@ int amdgpu_uvd_suspend(struct amdgpu_device *adev) if (atomic_read(&adev->uvd.handles[i])) break; - if (i == AMDGPU_MAX_UVD_HANDLES) + if (i == adev->uvd.max_handles) return 0; size = amdgpu_bo_size(adev->uvd.vcpu_bo); -- cgit v1.2.3 From f8bee6135e167f5b35b7789c74c2956dad14d0d5 Mon Sep 17 00:00:00 2001 From: James Zhu Date: Tue, 6 Mar 2018 14:52:35 -0500 Subject: drm/amdgpu:Always save uvd vcpu_bo in VM Mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When UVD is in VM mode, there is not uvd handle exchanged, uvd.handles are always 0. So vcpu_bo always need save, Otherwise amdgpu driver will fail during suspend/resume. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105021 Signed-off-by: James Zhu Reviewed-by: Leo Liu Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c index 6fe155f4d4ab..5c26a8e806b9 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c @@ -299,12 +299,15 @@ int amdgpu_uvd_suspend(struct amdgpu_device *adev) cancel_delayed_work_sync(&adev->uvd.idle_work); - for (i = 0; i < adev->uvd.max_handles; ++i) - if (atomic_read(&adev->uvd.handles[i])) - break; + /* only valid for physical mode */ + if (adev->asic_type < CHIP_POLARIS10) { + for (i = 0; i < adev->uvd.max_handles; ++i) + if (atomic_read(&adev->uvd.handles[i])) + break; - if (i == adev->uvd.max_handles) - return 0; + if (i == adev->uvd.max_handles) + return 0; + } size = amdgpu_bo_size(adev->uvd.vcpu_bo); ptr = adev->uvd.cpu_addr; -- cgit v1.2.3 From 4a53d9045ec31f3f97719c2e41cc8b2e7151a1fe Mon Sep 17 00:00:00 2001 From: Shirish S Date: Wed, 7 Mar 2018 12:36:11 +0530 Subject: drm/amd/display: validate plane format on primary plane In dce110, the plane configuration is such that plane 0 or the primary plane should be rendered with only RGB data. This patch adds the validation to ensure that no video data is rendered on plane 0. Signed-off-by: Shirish S Reviewed-by: Tony Cheng Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/gpu/drm') diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c index d5f851d74f5a..00f18c485e1e 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c @@ -879,6 +879,13 @@ static bool dce110_validate_surface_sets( plane->src_rect.height > 1080)) return false; + /* we don't have the logic to support underlay + * only yet so block the use case where we get + * NV12 plane as top layer + */ + if (j == 0) + return false; + /* irrespective of plane format, * stream should be RGB encoded */ -- cgit v1.2.3