From 36d9579fed6c9429aa172f77bd28c58696ce8e2b Mon Sep 17 00:00:00 2001 From: Francesco Lavra Date: Tue, 10 Feb 2026 19:09:32 +0100 Subject: drm/solomon: Fix page start when updating rectangle in page addressing mode In page addressing mode, the pixel values of a dirty rectangle must be sent to the display controller one page at a time. The range of pages corresponding to a given rectangle is being incorrectly calculated as if the Y value of the top left coordinate of the rectangle was 0. This can result in rectangle updates being displayed on wrong parts of the screen. Fix the above issue by consolidating the start page calculation in a single place at the beginning of the update_rect function, and using the calculated value for all addressing modes. Fixes: b0daaa5cfaa5 ("drm/ssd130x: Support page addressing mode") Signed-off-by: Francesco Lavra Reviewed-by: Javier Martinez Canillas Link: https://patch.msgid.link/20260210180932.736502-1-flavra@baylibre.com Signed-off-by: Javier Martinez Canillas --- drivers/gpu/drm/solomon/ssd130x.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/solomon/ssd130x.c b/drivers/gpu/drm/solomon/ssd130x.c index 6ecf9e2ff61b..c77455b1834d 100644 --- a/drivers/gpu/drm/solomon/ssd130x.c +++ b/drivers/gpu/drm/solomon/ssd130x.c @@ -737,6 +737,7 @@ static int ssd130x_update_rect(struct ssd130x_device *ssd130x, unsigned int height = drm_rect_height(rect); unsigned int line_length = DIV_ROUND_UP(width, 8); unsigned int page_height = SSD130X_PAGE_HEIGHT; + u8 page_start = ssd130x->page_offset + y / page_height; unsigned int pages = DIV_ROUND_UP(height, page_height); struct drm_device *drm = &ssd130x->drm; u32 array_idx = 0; @@ -774,14 +775,11 @@ static int ssd130x_update_rect(struct ssd130x_device *ssd130x, */ if (!ssd130x->page_address_mode) { - u8 page_start; - /* Set address range for horizontal addressing mode */ ret = ssd130x_set_col_range(ssd130x, ssd130x->col_offset + x, width); if (ret < 0) return ret; - page_start = ssd130x->page_offset + y / page_height; ret = ssd130x_set_page_range(ssd130x, page_start, pages); if (ret < 0) return ret; @@ -813,7 +811,7 @@ static int ssd130x_update_rect(struct ssd130x_device *ssd130x, */ if (ssd130x->page_address_mode) { ret = ssd130x_set_page_pos(ssd130x, - ssd130x->page_offset + i, + page_start + i, ssd130x->col_offset + x); if (ret < 0) return ret; -- cgit v1.2.3 From 6e3f4514e3b432871ac81717d24f56b441857f77 Mon Sep 17 00:00:00 2001 From: Tvrtko Ursulin Date: Fri, 27 Feb 2026 12:49:01 +0000 Subject: drm/ttm: Fix ttm_pool_beneficial_order() return type MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix a nasty copy and paste bug, where the incorrect boolean return type of the ttm_pool_beneficial_order() helper had a consequence of avoiding direct reclaim too eagerly for drivers which use this feature (currently amdgpu). Signed-off-by: Tvrtko Ursulin Fixes: 7e9c548d3709 ("drm/ttm: Allow drivers to specify maximum beneficial TTM pool size") Cc: Christian König Cc: Thadeu Lima de Souza Cascardo Cc: dri-devel@lists.freedesktop.org Cc: # v6.19+ Reviewed-by: Christian König Signed-off-by: Tvrtko Ursulin Link: https://lore.kernel.org/r/20260227124901.3177-1-tvrtko.ursulin@igalia.com --- drivers/gpu/drm/ttm/ttm_pool_internal.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/ttm/ttm_pool_internal.h b/drivers/gpu/drm/ttm/ttm_pool_internal.h index 82c4b7e56a99..24c179fd69d1 100644 --- a/drivers/gpu/drm/ttm/ttm_pool_internal.h +++ b/drivers/gpu/drm/ttm/ttm_pool_internal.h @@ -17,7 +17,7 @@ static inline bool ttm_pool_uses_dma32(struct ttm_pool *pool) return pool->alloc_flags & TTM_ALLOCATION_POOL_USE_DMA32; } -static inline bool ttm_pool_beneficial_order(struct ttm_pool *pool) +static inline unsigned int ttm_pool_beneficial_order(struct ttm_pool *pool) { return pool->alloc_flags & 0xff; } -- cgit v1.2.3 From fb797a70108f3fda83fde6dea30bee4be7d5df8b Mon Sep 17 00:00:00 2001 From: Chris Brandt Date: Thu, 26 Feb 2026 20:52:16 -0500 Subject: drm: renesas: rz-du: mipi_dsi: Set DSI divider Before the MIPI DSI clock source can be configured, the target divide ratio needs to be set. Signed-off-by: Chris Brandt Reviewed-by: Biju Das Tested-by: Biju Das Fixes: 5a4326f2e3b1 ("clk: renesas: rzg2l: Remove DSI clock rate restrictions") Link: https://patch.msgid.link/20260227015216.2721504-1-chris.brandt@renesas.com Signed-off-by: Biju Das --- drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c index f74a0aa85ba8..29f2b7d24fe5 100644 --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c @@ -1122,6 +1122,7 @@ static int rzg2l_mipi_dsi_host_attach(struct mipi_dsi_host *host, struct mipi_dsi_device *device) { struct rzg2l_mipi_dsi *dsi = host_to_rzg2l_mipi_dsi(host); + int bpp; int ret; if (device->lanes > dsi->num_data_lanes) { @@ -1131,7 +1132,8 @@ static int rzg2l_mipi_dsi_host_attach(struct mipi_dsi_host *host, return -EINVAL; } - switch (mipi_dsi_pixel_format_to_bpp(device->format)) { + bpp = mipi_dsi_pixel_format_to_bpp(device->format); + switch (bpp) { case 24: break; case 18: @@ -1162,6 +1164,18 @@ static int rzg2l_mipi_dsi_host_attach(struct mipi_dsi_host *host, drm_bridge_add(&dsi->bridge); + /* + * Report the required division ratio setting for the MIPI clock dividers. + * + * vclk * bpp = hsclk * 8 * num_lanes + * + * vclk * DSI_AB_divider = hsclk * 16 + * + * which simplifies to... + * DSI_AB_divider = bpp * 2 / num_lanes + */ + rzg2l_cpg_dsi_div_set_divider(bpp * 2 / dsi->lanes, PLL5_TARGET_DSI); + return 0; } -- cgit v1.2.3 From 2e3649e237237258a08d75afef96648dd2b379f7 Mon Sep 17 00:00:00 2001 From: Julian Orth Date: Sun, 1 Mar 2026 13:34:42 +0100 Subject: drm/syncobj: Fix handle <-> fd ioctls with dirty stack MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Consider the following application: #include #include #include #include int main(void) { int fd = open("/dev/dri/renderD128", O_RDWR); struct drm_syncobj_create arg1; ioctl(fd, DRM_IOCTL_SYNCOBJ_CREATE, &arg1); struct drm_syncobj_handle arg2; memset(&arg2, 1, sizeof(arg2)); // simulate dirty stack arg2.handle = arg1.handle; arg2.flags = 0; arg2.fd = 0; arg2.pad = 0; // arg2.point = 0; // userspace is required to set point to 0 ioctl(fd, DRM_IOCTL_SYNCOBJ_HANDLE_TO_FD, &arg2); } The last ioctl returns EINVAL because args->point is not 0. However, userspace developed against older kernel versions is not aware of the new point field and might therefore not initialize it. The correct check would be if (args->flags & DRM_SYNCOBJ_FD_TO_HANDLE_FLAGS_TIMELINE) return -EINVAL; However, there might already be userspace that relies on this not returning an error as long as point == 0. Therefore use the more lenient check. Fixes: c2d3a7300695 ("drm/syncobj: Extend EXPORT_SYNC_FILE for timeline syncobjs") Signed-off-by: Julian Orth Reviewed-by: Christian König Signed-off-by: Christian König Link: https://lore.kernel.org/r/20260301-point-v1-1-21fc5fd98614@gmail.com --- drivers/gpu/drm/drm_syncobj.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/drm_syncobj.c b/drivers/gpu/drm/drm_syncobj.c index 250734dee928..49eccb43ce63 100644 --- a/drivers/gpu/drm/drm_syncobj.c +++ b/drivers/gpu/drm/drm_syncobj.c @@ -875,7 +875,7 @@ drm_syncobj_handle_to_fd_ioctl(struct drm_device *dev, void *data, return drm_syncobj_export_sync_file(file_private, args->handle, point, &args->fd); - if (args->point) + if (point) return -EINVAL; return drm_syncobj_handle_to_fd(file_private, args->handle, @@ -909,7 +909,7 @@ drm_syncobj_fd_to_handle_ioctl(struct drm_device *dev, void *data, args->handle, point); - if (args->point) + if (point) return -EINVAL; return drm_syncobj_fd_to_handle(file_private, args->fd, -- cgit v1.2.3 From 61ded1083b264ff67ca8c2de822c66b6febaf9a8 Mon Sep 17 00:00:00 2001 From: Yujie Liu Date: Fri, 27 Feb 2026 16:24:52 +0800 Subject: drm/sched: Fix kernel-doc warning for drm_sched_job_done() There is a kernel-doc warning for the scheduler: Warning: drivers/gpu/drm/scheduler/sched_main.c:367 function parameter 'result' not described in 'drm_sched_job_done' Fix the warning by describing the undocumented error code. Fixes: 539f9ee4b52a ("drm/scheduler: properly forward fence errors") Signed-off-by: Yujie Liu [phasta: Flesh out commit message] Signed-off-by: Philipp Stanner Link: https://patch.msgid.link/20260227082452.1802922-1-yujie.liu@intel.com --- drivers/gpu/drm/scheduler/sched_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/scheduler/sched_main.c b/drivers/gpu/drm/scheduler/sched_main.c index e6ee35406165..2d5cb21a05b6 100644 --- a/drivers/gpu/drm/scheduler/sched_main.c +++ b/drivers/gpu/drm/scheduler/sched_main.c @@ -361,6 +361,7 @@ static void drm_sched_run_free_queue(struct drm_gpu_scheduler *sched) /** * drm_sched_job_done - complete a job * @s_job: pointer to the job which is done + * @result: 0 on success, -ERRNO on error * * Finish the job's fence and resubmit the work items. */ -- cgit v1.2.3 From a58d487fb1a52579d3c37544ea371da78ed70c45 Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Wed, 4 Mar 2026 09:56:16 +0100 Subject: drm/ttm/tests: Fix build failure on PREEMPT_RT MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix a compile error in the kunit tests when CONFIG_PREEMPT_RT is enabled, and the normal mutex is converted into a rtmutex. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202602261547.3bM6yVAS-lkp@intel.com/ Reviewed-by: Jouni Högander Link: https://patch.msgid.link/20260304085616.1216961-1-dev@lankhorst.se Signed-off-by: Maarten Lankhorst --- drivers/gpu/drm/ttm/tests/ttm_bo_test.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/ttm/tests/ttm_bo_test.c b/drivers/gpu/drm/ttm/tests/ttm_bo_test.c index d468f8322072..f3103307b5df 100644 --- a/drivers/gpu/drm/ttm/tests/ttm_bo_test.c +++ b/drivers/gpu/drm/ttm/tests/ttm_bo_test.c @@ -222,13 +222,13 @@ static void ttm_bo_reserve_interrupted(struct kunit *test) KUNIT_FAIL(test, "Couldn't create ttm bo reserve task\n"); /* Take a lock so the threaded reserve has to wait */ - mutex_lock(&bo->base.resv->lock.base); + dma_resv_lock(bo->base.resv, NULL); wake_up_process(task); msleep(20); err = kthread_stop(task); - mutex_unlock(&bo->base.resv->lock.base); + dma_resv_unlock(bo->base.resv); KUNIT_ASSERT_EQ(test, err, -ERESTARTSYS); } -- cgit v1.2.3 From 8f3c6f08ababad2e3bdd239728cf66a9949446b4 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 24 Feb 2026 13:17:50 +1000 Subject: nouveau/dpcd: return EBUSY for aux xfer if the device is asleep If we have runtime suspended, and userspace wants to use /dev/drm_dp_* then just tell it the device is busy instead of crashing in the GSP code. WARNING: CPU: 2 PID: 565741 at drivers/gpu/drm/nouveau/nvkm/subdev/gsp/rm/r535/rpc.c:164 r535_gsp_msgq_wait+0x9a/0xb0 [nouveau] CPU: 2 UID: 0 PID: 565741 Comm: fwupd Not tainted 6.18.10-200.fc43.x86_64 #1 PREEMPT(lazy) Hardware name: LENOVO 20QTS0PQ00/20QTS0PQ00, BIOS N2OET65W (1.52 ) 08/05/2024 RIP: 0010:r535_gsp_msgq_wait+0x9a/0xb0 [nouveau] This is a simple fix to get backported. We should probably engineer a proper power domain solution to wake up devices and keep them awake while fw updates are happening. Cc: stable@vger.kernel.org Fixes: 8894f4919bc4 ("drm/nouveau: register a drm_dp_aux channel for each dp connector") Reviewed-by: Lyude Paul Signed-off-by: Dave Airlie Link: https://patch.msgid.link/20260224031750.791621-1-airlied@gmail.com Signed-off-by: Danilo Krummrich --- drivers/gpu/drm/nouveau/nouveau_connector.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 00d4530aea71..cc239492c7f0 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -1230,6 +1230,9 @@ nouveau_connector_aux_xfer(struct drm_dp_aux *obj, struct drm_dp_aux_msg *msg) u8 size = msg->size; int ret; + if (pm_runtime_suspended(nv_connector->base.dev->dev)) + return -EBUSY; + nv_encoder = find_encoder(&nv_connector->base, DCB_OUTPUT_DP); if (!nv_encoder) return -ENODEV; -- cgit v1.2.3