From fd39c41bcd82d5ebaaebadb944eab5598c668a90 Mon Sep 17 00:00:00 2001 From: Thomas Zimmermann Date: Mon, 27 Jan 2025 14:44:14 +0100 Subject: drm/ast: astdp: Fix timeout for enabling video signal The ASTDP transmitter sometimes takes up to 1 second for enabling the video signal, while the timeout is only 200 msec. This results in a kernel error message. Increase the timeout to 1 second. An example of the error message is shown below. [ 697.084433] ------------[ cut here ]------------ [ 697.091115] ast 0000:02:00.0: [drm] drm_WARN_ON(!__ast_dp_wait_enable(ast, enabled)) [ 697.091233] WARNING: CPU: 1 PID: 160 at drivers/gpu/drm/ast/ast_dp.c:232 ast_dp_set_enable+0x123/0x140 [ast] [...] [ 697.272469] RIP: 0010:ast_dp_set_enable+0x123/0x140 [ast] [...] [ 697.415283] Call Trace: [ 697.420727] [ 697.425908] ? show_trace_log_lvl+0x196/0x2c0 [ 697.433304] ? show_trace_log_lvl+0x196/0x2c0 [ 697.440693] ? drm_atomic_helper_commit_modeset_enables+0x30a/0x470 [ 697.450115] ? ast_dp_set_enable+0x123/0x140 [ast] [ 697.458059] ? __warn.cold+0xaf/0xca [ 697.464713] ? ast_dp_set_enable+0x123/0x140 [ast] [ 697.472633] ? report_bug+0x134/0x1d0 [ 697.479544] ? handle_bug+0x58/0x90 [ 697.486127] ? exc_invalid_op+0x13/0x40 [ 697.492975] ? asm_exc_invalid_op+0x16/0x20 [ 697.500224] ? preempt_count_sub+0x14/0xc0 [ 697.507473] ? ast_dp_set_enable+0x123/0x140 [ast] [ 697.515377] ? ast_dp_set_enable+0x123/0x140 [ast] [ 697.523227] drm_atomic_helper_commit_modeset_enables+0x30a/0x470 [ 697.532388] drm_atomic_helper_commit_tail+0x58/0x90 [ 697.540400] ast_mode_config_helper_atomic_commit_tail+0x30/0x40 [ast] [ 697.550009] commit_tail+0xfe/0x1d0 [ 697.556547] drm_atomic_helper_commit+0x198/0x1c0 This is a cosmetical problem. Enabling the video signal still works even with the error message. The problem has always been present, but only recent versions of the ast driver warn about missing the timeout. Signed-off-by: Thomas Zimmermann Fixes: 4e29cc7c5c67 ("drm/ast: astdp: Replace ast_dp_set_on_off()") Cc: Thomas Zimmermann Cc: Jocelyn Falempe Cc: Dave Airlie Cc: dri-devel@lists.freedesktop.org Cc: # v6.13+ Reviewed-by: Jocelyn Falempe Link: https://patchwork.freedesktop.org/patch/msgid/20250127134423.84266-1-tzimmermann@suse.de --- drivers/gpu/drm/ast/ast_dp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/ast/ast_dp.c b/drivers/gpu/drm/ast/ast_dp.c index 0e282b7b167c..b9eb67e3fa90 100644 --- a/drivers/gpu/drm/ast/ast_dp.c +++ b/drivers/gpu/drm/ast/ast_dp.c @@ -195,7 +195,7 @@ static bool __ast_dp_wait_enable(struct ast_device *ast, bool enabled) if (enabled) vgacrdf_test |= AST_IO_VGACRDF_DP_VIDEO_ENABLE; - for (i = 0; i < 200; ++i) { + for (i = 0; i < 1000; ++i) { if (i) mdelay(1); vgacrdf = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xdf, -- cgit v1.2.3 From 79fc672a092d93a7eac24fe20a571d4efd8fa5a4 Mon Sep 17 00:00:00 2001 From: Haoxiang Li Date: Thu, 19 Dec 2024 17:02:56 +0800 Subject: drm/komeda: Add check for komeda_get_layer_fourcc_list() Add check for the return value of komeda_get_layer_fourcc_list() to catch the potential exception. Fixes: 5d51f6c0da1b ("drm/komeda: Add writeback support") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li Acked-by: Liviu Dudau Link: https://lore.kernel.org/r/20241219090256.146424-1-haoxiang_li2024@163.com Signed-off-by: Liviu Dudau --- drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c index ebccb74306a7..f30b3d5eeca5 100644 --- a/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c +++ b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c @@ -160,6 +160,10 @@ static int komeda_wb_connector_add(struct komeda_kms_dev *kms, formats = komeda_get_layer_fourcc_list(&mdev->fmt_tbl, kwb_conn->wb_layer->layer_type, &n_formats); + if (!formats) { + kfree(kwb_conn); + return -ENOMEM; + } err = drm_writeback_connector_init(&kms->base, wb_conn, &komeda_wb_connector_funcs, -- cgit v1.2.3 From 6daaae5ff7f3b23a2dacc9c387ff3d4f95b67cad Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 29 Jan 2025 10:51:48 +0100 Subject: gpu: drm_dp_cec: fix broken CEC adapter properties check If the hotplug detect of a display is low for longer than one second (configurable through drm_dp_cec_unregister_delay), then the CEC adapter is unregistered since we assume the display was disconnected. If the HPD went low for less than one second, then we check if the properties of the CEC adapter have changed, since that indicates that we actually switch to new hardware and we have to unregister the old CEC device and register a new one. Unfortunately, the test for changed properties was written poorly, and after a new CEC capability was added to the CEC core code the test always returned true (i.e. the properties had changed). As a result the CEC device was unregistered and re-registered for every HPD toggle. If the CEC remote controller integration was also enabled (CONFIG_MEDIA_CEC_RC was set), then the corresponding input device was also unregistered and re-registered. As a result the input device in /sys would keep incrementing its number, e.g.: /sys/devices/pci0000:00/0000:00:08.1/0000:e7:00.0/rc/rc0/input20 Since short HPD toggles are common, the number could over time get into the thousands. While not a serious issue (i.e. nothing crashes), it is not intended to work that way. This patch changes the test so that it only checks for the single CEC capability that can actually change, and it ignores any other capabilities, so this is now safe as well if new caps are added in the future. With the changed test the bit under #ifndef CONFIG_MEDIA_CEC_RC can be dropped as well, so that's a nice cleanup. Signed-off-by: Hans Verkuil Reported-by: Farblos Reviewed-by: Dmitry Baryshkov Fixes: 2c6d1fffa1d9 ("drm: add support for DisplayPort CEC-Tunneling-over-AUX") Tested-by: Farblos Link: https://patchwork.freedesktop.org/patch/msgid/361bb03d-1691-4e23-84da-0861ead5dbdc@xs4all.nl Signed-off-by: Dmitry Baryshkov --- drivers/gpu/drm/display/drm_dp_cec.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/display/drm_dp_cec.c b/drivers/gpu/drm/display/drm_dp_cec.c index 007ceb281d00..56a4965e518c 100644 --- a/drivers/gpu/drm/display/drm_dp_cec.c +++ b/drivers/gpu/drm/display/drm_dp_cec.c @@ -311,16 +311,6 @@ void drm_dp_cec_attach(struct drm_dp_aux *aux, u16 source_physical_address) if (!aux->transfer) return; -#ifndef CONFIG_MEDIA_CEC_RC - /* - * CEC_CAP_RC is part of CEC_CAP_DEFAULTS, but it is stripped by - * cec_allocate_adapter() if CONFIG_MEDIA_CEC_RC is undefined. - * - * Do this here as well to ensure the tests against cec_caps are - * correct. - */ - cec_caps &= ~CEC_CAP_RC; -#endif cancel_delayed_work_sync(&aux->cec.unregister_work); mutex_lock(&aux->cec.lock); @@ -337,7 +327,9 @@ void drm_dp_cec_attach(struct drm_dp_aux *aux, u16 source_physical_address) num_las = CEC_MAX_LOG_ADDRS; if (aux->cec.adap) { - if (aux->cec.adap->capabilities == cec_caps && + /* Check if the adapter properties have changed */ + if ((aux->cec.adap->capabilities & CEC_CAP_MONITOR_ALL) == + (cec_caps & CEC_CAP_MONITOR_ALL) && aux->cec.adap->available_log_addrs == num_las) { /* Unchanged, so just set the phys addr */ cec_s_phys_addr(aux->cec.adap, source_physical_address, false); -- cgit v1.2.3