From df16dd53c575d0cb9dbee20a3149927c862a9ff6 Mon Sep 17 00:00:00 2001 From: "Ira W. Snyder" Date: Thu, 27 May 2010 19:59:02 +0200 Subject: hwmon: (ltc4245) Read only one GPIO pin Read only one of the GPIO pins as an analog voltage. The ADC can be switched to a different GPIO pin at runtime, but this is not supported. Previously, this driver would report the analog voltage of the currently selected GPIO pin as all three GPIO voltages: in9_input, in10_input and in11_input. Signed-off-by: Ira W. Snyder Signed-off-by: Jean Delvare Cc: stable@kernel.org --- drivers/hwmon/ltc4245.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) (limited to 'drivers/hwmon/ltc4245.c') diff --git a/drivers/hwmon/ltc4245.c b/drivers/hwmon/ltc4245.c index 65c232a9d0c5..21d201befc2c 100644 --- a/drivers/hwmon/ltc4245.c +++ b/drivers/hwmon/ltc4245.c @@ -45,9 +45,7 @@ enum ltc4245_cmd { LTC4245_VEEIN = 0x19, LTC4245_VEESENSE = 0x1a, LTC4245_VEEOUT = 0x1b, - LTC4245_GPIOADC1 = 0x1c, - LTC4245_GPIOADC2 = 0x1d, - LTC4245_GPIOADC3 = 0x1e, + LTC4245_GPIOADC = 0x1c, }; struct ltc4245_data { @@ -61,7 +59,7 @@ struct ltc4245_data { u8 cregs[0x08]; /* Voltage registers */ - u8 vregs[0x0f]; + u8 vregs[0x0d]; }; static struct ltc4245_data *ltc4245_update_device(struct device *dev) @@ -86,7 +84,7 @@ static struct ltc4245_data *ltc4245_update_device(struct device *dev) data->cregs[i] = val; } - /* Read voltage registers -- 0x10 to 0x1f */ + /* Read voltage registers -- 0x10 to 0x1c */ for (i = 0; i < ARRAY_SIZE(data->vregs); i++) { val = i2c_smbus_read_byte_data(client, i+0x10); if (unlikely(val < 0)) @@ -128,9 +126,7 @@ static int ltc4245_get_voltage(struct device *dev, u8 reg) case LTC4245_VEEOUT: voltage = regval * -55; break; - case LTC4245_GPIOADC1: - case LTC4245_GPIOADC2: - case LTC4245_GPIOADC3: + case LTC4245_GPIOADC: voltage = regval * 10; break; default: @@ -297,9 +293,7 @@ LTC4245_ALARM(in7_min_alarm, (1 << 2), LTC4245_FAULT2); LTC4245_ALARM(in8_min_alarm, (1 << 3), LTC4245_FAULT2); /* GPIO voltages */ -LTC4245_VOLTAGE(in9_input, LTC4245_GPIOADC1); -LTC4245_VOLTAGE(in10_input, LTC4245_GPIOADC2); -LTC4245_VOLTAGE(in11_input, LTC4245_GPIOADC3); +LTC4245_VOLTAGE(in9_input, LTC4245_GPIOADC); /* Power Consumption (virtual) */ LTC4245_POWER(power1_input, LTC4245_12VSENSE); @@ -342,8 +336,6 @@ static struct attribute *ltc4245_attributes[] = { &sensor_dev_attr_in8_min_alarm.dev_attr.attr, &sensor_dev_attr_in9_input.dev_attr.attr, - &sensor_dev_attr_in10_input.dev_attr.attr, - &sensor_dev_attr_in11_input.dev_attr.attr, &sensor_dev_attr_power1_input.dev_attr.attr, &sensor_dev_attr_power2_input.dev_attr.attr, -- cgit v1.2.3