From 2219cd81a6cd186200606693b360c6429c003bb3 Mon Sep 17 00:00:00 2001 From: Juerg Haefliger Date: Wed, 14 Feb 2007 21:15:05 +0100 Subject: hwmon/vt1211: Add probing of alternate config index port The configuration index port of the vt1211 can be accessed at two different addresses 0x2e or 0x4e, depending on pin strappings. This patch adds support to scan both addresses during module initialization. Signed-off-by: Juerg Haefliger Signed-off-by: Jean Delvare --- drivers/hwmon/vt1211.c | 58 ++++++++++++++++++++++++++------------------------ 1 file changed, 30 insertions(+), 28 deletions(-) (limited to 'drivers/hwmon') diff --git a/drivers/hwmon/vt1211.c b/drivers/hwmon/vt1211.c index 25cc56003d7a..89c23d6add7b 100644 --- a/drivers/hwmon/vt1211.c +++ b/drivers/hwmon/vt1211.c @@ -178,9 +178,10 @@ struct vt1211_data { * Super-I/O constants and functions * --------------------------------------------------------------------- */ -/* Configuration & data index port registers */ -#define SIO_REG_CIP 0x2e -#define SIO_REG_DIP 0x2f +/* Configuration index port registers + * The vt1211 can live at 2 different addresses so we need to probe both */ +#define SIO_REG_CIP1 0x2e +#define SIO_REG_CIP2 0x4e /* Configuration registers */ #define SIO_VT1211_LDN 0x07 /* logical device number */ @@ -193,33 +194,33 @@ struct vt1211_data { /* VT1211 logical device numbers */ #define SIO_VT1211_LDN_HWMON 0x0b /* HW monitor */ -static inline void superio_outb(int reg, int val) +static inline void superio_outb(int sio_cip, int reg, int val) { - outb(reg, SIO_REG_CIP); - outb(val, SIO_REG_DIP); + outb(reg, sio_cip); + outb(val, sio_cip + 1); } -static inline int superio_inb(int reg) +static inline int superio_inb(int sio_cip, int reg) { - outb(reg, SIO_REG_CIP); - return inb(SIO_REG_DIP); + outb(reg, sio_cip); + return inb(sio_cip + 1); } -static inline void superio_select(int ldn) +static inline void superio_select(int sio_cip, int ldn) { - outb(SIO_VT1211_LDN, SIO_REG_CIP); - outb(ldn, SIO_REG_DIP); + outb(SIO_VT1211_LDN, sio_cip); + outb(ldn, sio_cip + 1); } -static inline void superio_enter(void) +static inline void superio_enter(int sio_cip) { - outb(0x87, SIO_REG_CIP); - outb(0x87, SIO_REG_CIP); + outb(0x87, sio_cip); + outb(0x87, sio_cip); } -static inline void superio_exit(void) +static inline void superio_exit(int sio_cip) { - outb(0xaa, SIO_REG_CIP); + outb(0xaa, sio_cip); } /* --------------------------------------------------------------------- @@ -1263,26 +1264,26 @@ EXIT: return err; } -static int __init vt1211_find(unsigned short *address) +static int __init vt1211_find(int sio_cip, unsigned short *address) { int err = -ENODEV; - superio_enter(); + superio_enter(sio_cip); - if (superio_inb(SIO_VT1211_DEVID) != SIO_VT1211_ID) { + if (superio_inb(sio_cip, SIO_VT1211_DEVID) != SIO_VT1211_ID) { goto EXIT; } - superio_select(SIO_VT1211_LDN_HWMON); + superio_select(sio_cip, SIO_VT1211_LDN_HWMON); - if ((superio_inb(SIO_VT1211_ACTIVE) & 1) == 0) { + if ((superio_inb(sio_cip, SIO_VT1211_ACTIVE) & 1) == 0) { printk(KERN_WARNING DRVNAME ": HW monitor is disabled, " "skipping\n"); goto EXIT; } - *address = ((superio_inb(SIO_VT1211_BADDR) << 8) | - (superio_inb(SIO_VT1211_BADDR + 1))) & 0xff00; + *address = ((superio_inb(sio_cip, SIO_VT1211_BADDR) << 8) | + (superio_inb(sio_cip, SIO_VT1211_BADDR + 1))) & 0xff00; if (*address == 0) { printk(KERN_WARNING DRVNAME ": Base address is not set, " "skipping\n"); @@ -1291,10 +1292,11 @@ static int __init vt1211_find(unsigned short *address) err = 0; printk(KERN_INFO DRVNAME ": Found VT1211 chip at 0x%04x, " - "revision %u\n", *address, superio_inb(SIO_VT1211_DEVREV)); + "revision %u\n", *address, + superio_inb(sio_cip, SIO_VT1211_DEVREV)); EXIT: - superio_exit(); + superio_exit(sio_cip); return err; } @@ -1303,8 +1305,8 @@ static int __init vt1211_init(void) int err; unsigned short address = 0; - err = vt1211_find(&address); - if (err) { + if ((err = vt1211_find(SIO_REG_CIP1, &address)) && + (err = vt1211_find(SIO_REG_CIP2, &address))) { goto EXIT; } -- cgit v1.2.3