From 657c93b10fac97467cdf1d0424a209ce2e81991a Mon Sep 17 00:00:00 2001 From: David Hubbard Date: Wed, 14 Feb 2007 21:15:04 +0100 Subject: hwmon/w83627ehf: Add support for the W83627DHG chip Signed-off-by: David Hubbard Signed-off-by: Jean Delvare --- drivers/hwmon/w83627ehf.c | 54 +++++++++++++++++++++++++++++++++++++---------- 1 file changed, 43 insertions(+), 11 deletions(-) (limited to 'drivers/hwmon') diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 212a1558c63b..da5828f2dfc2 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -32,8 +32,10 @@ Supports the following chips: - Chip #vin #fan #pwm #temp chip_id man_id - w83627ehf 10 5 4 3 0x88,0xa1 0x5ca3 + Chip #vin #fan #pwm #temp chip IDs man ID + w83627ehf 10 5 4 3 0x8850 0x88 0x5ca3 + 0x8860 0xa1 + w83627dhg 9 5 4 3 0xa020 0xc1 0x5ca3 */ #include @@ -55,8 +57,18 @@ static unsigned short address; * Super-I/O constants and functions */ +/* + * The three following globals are initialized in w83627ehf_find(), before + * the i2c-isa device is created. Otherwise, they could be stored in + * w83627ehf_data. This is ugly, but necessary, and when the driver is next + * updated to become a platform driver, the globals will disappear. + */ static int REG; /* The register to read/write */ static int VAL; /* The value to read/write */ +/* The w83627ehf/ehg have 10 voltage inputs, but the w83627dhg has 9. This + * value is also used in w83627ehf_detect() to export a device name in sysfs + * (e.g. w83627ehf or w83627dhg) */ +static int w83627ehf_num_in; #define W83627EHF_LD_HWM 0x0b @@ -65,8 +77,10 @@ static int VAL; /* The value to read/write */ #define SIO_REG_ENABLE 0x30 /* Logical device enable */ #define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ -#define SIO_W83627EHF_ID 0x8840 -#define SIO_ID_MASK 0xFFC0 +#define SIO_W83627EHF_ID 0x8850 +#define SIO_W83627EHG_ID 0x8860 +#define SIO_W83627DHG_ID 0xa020 +#define SIO_ID_MASK 0xFFF0 static inline void superio_outb(int reg, int val) @@ -115,8 +129,12 @@ superio_exit(void) #define W83627EHF_REG_BANK 0x4E #define W83627EHF_REG_CONFIG 0x40 -#define W83627EHF_REG_CHIP_ID 0x49 -#define W83627EHF_REG_MAN_ID 0x4F + +/* Not currently used: + * REG_MAN_ID has the value 0x5ca3 for all supported chips. + * REG_CHIP_ID == 0x88/0xa1/0xc1 depending on chip model. + * REG_MAN_ID is at port 0x4f + * REG_CHIP_ID is at port 0x58 */ static const u16 W83627EHF_REG_FAN[] = { 0x28, 0x29, 0x2a, 0x3f, 0x553 }; static const u16 W83627EHF_REG_FAN_MIN[] = { 0x3b, 0x3c, 0x3d, 0x3e, 0x55c }; @@ -429,7 +447,7 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) } /* Measured voltages and limits */ - for (i = 0; i < 10; i++) { + for (i = 0; i < w83627ehf_num_in; i++) { data->in[i] = w83627ehf_read_value(client, W83627EHF_REG_IN(i)); data->in_min[i] = w83627ehf_read_value(client, @@ -1121,7 +1139,7 @@ static void w83627ehf_device_remove_files(struct device *dev) device_remove_file(dev, &sda_sf3_arrays[i].dev_attr); for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++) device_remove_file(dev, &sda_sf3_arrays_fan4[i].dev_attr); - for (i = 0; i < 10; i++) { + for (i = 0; i < w83627ehf_num_in; i++) { device_remove_file(dev, &sda_in_input[i].dev_attr); device_remove_file(dev, &sda_in_alarm[i].dev_attr); device_remove_file(dev, &sda_in_min[i].dev_attr); @@ -1196,7 +1214,11 @@ static int w83627ehf_detect(struct i2c_adapter *adapter) client->flags = 0; dev = &client->dev; - strlcpy(client->name, "w83627ehf", I2C_NAME_SIZE); + if (w83627ehf_num_in == 9) + strlcpy(client->name, "w83627dhg", I2C_NAME_SIZE); + else /* just say ehf. 627EHG is 627EHF in lead-free packaging. */ + strlcpy(client->name, "w83627ehf", I2C_NAME_SIZE); + data->valid = 0; mutex_init(&data->update_lock); @@ -1246,7 +1268,7 @@ static int w83627ehf_detect(struct i2c_adapter *adapter) goto exit_remove; } - for (i = 0; i < 10; i++) + for (i = 0; i < w83627ehf_num_in; i++) if ((err = device_create_file(dev, &sda_in_input[i].dev_attr)) || (err = device_create_file(dev, &sda_in_alarm[i].dev_attr)) @@ -1340,7 +1362,17 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr) val = (superio_inb(SIO_REG_DEVID) << 8) | superio_inb(SIO_REG_DEVID + 1); - if ((val & SIO_ID_MASK) != SIO_W83627EHF_ID) { + switch (val & SIO_ID_MASK) { + case SIO_W83627DHG_ID: + w83627ehf_num_in = 9; + break; + case SIO_W83627EHF_ID: + case SIO_W83627EHG_ID: + w83627ehf_num_in = 10; + break; + default: + printk(KERN_WARNING "w83627ehf: unsupported chip ID: 0x%04x\n", + val); superio_exit(); return -ENODEV; } -- cgit v1.2.3