From 9ca48655667214be6ebd191628a3c4b5b529a87e Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Fri, 6 Jul 2007 12:48:48 -0700 Subject: IB/ipath: Remove support for preproduction HTX InfiniPath cards Clean up some code by removing support for some older pre-production HTX InfiniPath cards. Signed-off-by: Ralph Campbell --- drivers/infiniband/hw/ipath/ipath_driver.c | 10 +------- drivers/infiniband/hw/ipath/ipath_iba6110.c | 39 ++++++++--------------------- drivers/infiniband/hw/ipath/ipath_kernel.h | 4 --- drivers/infiniband/hw/ipath/ipath_verbs.c | 7 ------ 4 files changed, 12 insertions(+), 48 deletions(-) (limited to 'drivers/infiniband') diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index c40a542bebec..da4a2cfb61b4 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -1021,14 +1021,10 @@ void ipath_kreceive(struct ipath_devdata *dd) goto bail; } - /* There is already a thread processing this queue. */ - if (test_and_set_bit(0, &dd->ipath_rcv_pending)) - goto bail; - l = dd->ipath_port0head; hdrqtail = (u32) le64_to_cpu(*dd->ipath_hdrqtailptr); if (l == hdrqtail) - goto done; + goto bail; reloop: for (i = 0; l != hdrqtail; i++) { @@ -1163,10 +1159,6 @@ reloop: ipath_stats.sps_avgpkts_call = ipath_stats.sps_port0pkts / ++totcalls; -done: - clear_bit(0, &dd->ipath_rcv_pending); - smp_mb__after_clear_bit(); - bail:; } diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c index fdfa95d0dd72..650745d83fac 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -677,6 +677,12 @@ static int ipath_ht_boardname(struct ipath_devdata *dd, char *name, if (n) snprintf(name, namelen, "%s", n); + if (dd->ipath_boardrev != 6 && dd->ipath_boardrev != 7 && + dd->ipath_boardrev != 11) { + ipath_dev_err(dd, "Unsupported InfiniPath board %s!\n", name); + ret = 1; + goto bail; + } if (dd->ipath_majrev != 3 || (dd->ipath_minrev < 2 || dd->ipath_minrev > 4)) { /* @@ -694,36 +700,11 @@ static int ipath_ht_boardname(struct ipath_devdata *dd, char *name, * copies */ dd->ipath_flags |= IPATH_32BITCOUNTERS; + dd->ipath_flags |= IPATH_GPIO_INTR; if (dd->ipath_htspeed != 800) ipath_dev_err(dd, "Incorrectly configured for HT @ %uMHz\n", dd->ipath_htspeed); - if (dd->ipath_boardrev == 7 || dd->ipath_boardrev == 11 || - dd->ipath_boardrev == 6) - dd->ipath_flags |= IPATH_GPIO_INTR; - else - dd->ipath_flags |= IPATH_POLL_RX_INTR; - if (dd->ipath_boardrev == 8) { /* LS/X-1 */ - u64 val; - val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extstatus); - if (val & INFINIPATH_EXTS_SERDESSEL) { - /* - * hardware disabled - * - * This means that the chip is hardware disabled, - * and will not be able to bring up the link, - * in any case. We special case this and abort - * early, to avoid later messages. We also set - * the DISABLED status bit - */ - ipath_dbg("Unit %u is hardware-disabled\n", - dd->ipath_unit); - *dd->ipath_statusp |= IPATH_STATUS_DISABLED; - /* this value is handled differently */ - ret = 2; - goto bail; - } - } ret = 0; bail: @@ -1574,8 +1555,10 @@ static int ipath_ht_early_init(struct ipath_devdata *dd) * with 128, rather than 112. */ dd->ipath_flags |= IPATH_GPIO_INTR; - dd->ipath_flags &= ~IPATH_POLL_RX_INTR; - } + } else + ipath_dev_err(dd, "Unsupported InfiniPath serial " + "number %.16s!\n", dd->ipath_serial); + return 0; } diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index 8bad3e3c5550..a27e06297636 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -391,9 +391,6 @@ struct ipath_devdata { struct class_device *diag_class_dev; /* timer used to prevent stats overflow, error throttling, etc. */ struct timer_list ipath_stats_timer; - /* check for stale messages in rcv queue */ - /* only allow one intr at a time. */ - unsigned long ipath_rcv_pending; void *ipath_dummy_hdrq; /* used after port close */ dma_addr_t ipath_dummy_hdrq_phys; @@ -740,7 +737,6 @@ int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv); * are 64bit */ #define IPATH_32BITCOUNTERS 0x20000 /* can miss port0 rx interrupts */ -#define IPATH_POLL_RX_INTR 0x40000 #define IPATH_DISABLED 0x80000 /* administratively disabled */ /* Use GPIO interrupts for new counters */ #define IPATH_GPIO_ERRINTRS 0x100000 diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c index c76ea0e0b024..65f7181e9cf8 100644 --- a/drivers/infiniband/hw/ipath/ipath_verbs.c +++ b/drivers/infiniband/hw/ipath/ipath_verbs.c @@ -1375,13 +1375,6 @@ static void __verbs_timer(unsigned long arg) { struct ipath_devdata *dd = (struct ipath_devdata *) arg; - /* - * If port 0 receive packet interrupts are not available, or - * can be missed, poll the receive queue - */ - if (dd->ipath_flags & IPATH_POLL_RX_INTR) - ipath_kreceive(dd); - /* Handle verbs layer timeouts. */ ipath_ib_timer(dd->verbs_dev); -- cgit v1.2.3