From 6ff2da49c8a68320c2564006c94a492db58de5cd Mon Sep 17 00:00:00 2001 From: Wendy Xiong Date: Fri, 16 May 2008 22:18:21 -0700 Subject: bnx2: Add EEH PCI recovery. Add PCI recovery functions to the driver. The initial pci state is also saved so the the MSI state can be restored during PCI recovery. Signed-off-by: Wendy Xiong Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 88 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 88 insertions(+) (limited to 'drivers/net/bnx2.c') diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 934c2bfc464d..2589b99a8597 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -7119,6 +7119,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) } pci_set_master(pdev); + pci_save_state(pdev); bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); if (bp->pm_cap == 0) { @@ -7628,6 +7629,92 @@ bnx2_resume(struct pci_dev *pdev) return 0; } +/** + * bnx2_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state + * + * This function is called after a PCI bus error affecting + * this device has been detected. + */ +static pci_ers_result_t bnx2_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2 *bp = netdev_priv(dev); + + rtnl_lock(); + netif_device_detach(dev); + + if (netif_running(dev)) { + bnx2_netif_stop(bp); + del_timer_sync(&bp->timer); + bnx2_reset_nic(bp, BNX2_DRV_MSG_CODE_RESET); + } + + pci_disable_device(pdev); + rtnl_unlock(); + + /* Request a slot slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * bnx2_io_slot_reset - called after the pci bus has been reset. + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. + */ +static pci_ers_result_t bnx2_io_slot_reset(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2 *bp = netdev_priv(dev); + + rtnl_lock(); + if (pci_enable_device(pdev)) { + dev_err(&pdev->dev, + "Cannot re-enable PCI device after reset.\n"); + rtnl_unlock(); + return PCI_ERS_RESULT_DISCONNECT; + } + pci_set_master(pdev); + pci_restore_state(pdev); + + if (netif_running(dev)) { + bnx2_set_power_state(bp, PCI_D0); + bnx2_init_nic(bp, 1); + } + + rtnl_unlock(); + return PCI_ERS_RESULT_RECOVERED; +} + +/** + * bnx2_io_resume - called when traffic can start flowing again. + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. + */ +static void bnx2_io_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2 *bp = netdev_priv(dev); + + rtnl_lock(); + if (netif_running(dev)) + bnx2_netif_start(bp); + + netif_device_attach(dev); + rtnl_unlock(); +} + +static struct pci_error_handlers bnx2_err_handler = { + .error_detected = bnx2_io_error_detected, + .slot_reset = bnx2_io_slot_reset, + .resume = bnx2_io_resume, +}; + static struct pci_driver bnx2_pci_driver = { .name = DRV_MODULE_NAME, .id_table = bnx2_pci_tbl, @@ -7635,6 +7722,7 @@ static struct pci_driver bnx2_pci_driver = { .remove = __devexit_p(bnx2_remove_one), .suspend = bnx2_suspend, .resume = bnx2_resume, + .err_handler = &bnx2_err_handler, }; static int __init bnx2_init(void) -- cgit v1.2.3