From 29d52e545f6f077d8c29fa35d1c52d95e4a2185a Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 5 Feb 2008 00:02:11 +0000 Subject: DM9000: Add ethtool support for reading and writing EEPROM Add ethtool support to access the configuration EEPROM connected to the DM9000. Signed-off-by: Ben Dooks Signed-off-by: Jeff Garzik --- drivers/net/dm9000.c | 66 +++++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 60 insertions(+), 6 deletions(-) (limited to 'drivers/net/dm9000.c') diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index a769c89a3690..082372515432 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -186,7 +186,8 @@ static int dm9000_phy_read(struct net_device *dev, int phyaddr_unsused, int reg) static void dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value); -static void dm9000_read_eeprom(board_info_t *, int addr, unsigned char *to); +static void dm9000_read_eeprom(board_info_t *, int addr, u8 *to); +static void dm9000_write_eeprom(board_info_t *, int addr, u8 *dp); static void dm9000_rx(struct net_device *); static void dm9000_hash_table(struct net_device *); @@ -409,12 +410,65 @@ static u32 dm9000_get_link(struct net_device *dev) return mii_link_ok(&dm->mii); } +#define DM_EEPROM_MAGIC (0x444D394B) + +static int dm9000_get_eeprom_len(struct net_device *dev) +{ + return 128; +} + +static int dm9000_get_eeprom(struct net_device *dev, + struct ethtool_eeprom *ee, u8 *data) +{ + board_info_t *dm = to_dm9000_board(dev); + int offset = ee->offset; + int len = ee->len; + int i; + + /* EEPROM access is aligned to two bytes */ + + if ((len & 1) != 0 || (offset & 1) != 0) + return -EINVAL; + + ee->magic = DM_EEPROM_MAGIC; + + for (i = 0; i < len; i += 2) + dm9000_read_eeprom(dm, (offset + i) / 2, data + i); + + return 0; +} + +static int dm9000_set_eeprom(struct net_device *dev, + struct ethtool_eeprom *ee, u8 *data) +{ + board_info_t *dm = to_dm9000_board(dev); + int offset = ee->offset; + int len = ee->len; + int i; + + /* EEPROM access is aligned to two bytes */ + + if ((len & 1) != 0 || (offset & 1) != 0) + return -EINVAL; + + if (ee->magic != DM_EEPROM_MAGIC) + return -EINVAL; + + for (i = 0; i < len; i += 2) + dm9000_write_eeprom(dm, (offset + i) / 2, data + i); + + return 0; +} + static const struct ethtool_ops dm9000_ethtool_ops = { .get_drvinfo = dm9000_get_drvinfo, .get_settings = dm9000_get_settings, .set_settings = dm9000_set_settings, .nway_reset = dm9000_nway_reset, .get_link = dm9000_get_link, + .get_eeprom_len = dm9000_get_eeprom_len, + .get_eeprom = dm9000_get_eeprom, + .set_eeprom = dm9000_set_eeprom, }; @@ -1008,7 +1062,7 @@ dm9000_rx(struct net_device *dev) * Read a word data from EEPROM */ static void -dm9000_read_eeprom(board_info_t *db, int offset, unsigned char *to) +dm9000_read_eeprom(board_info_t *db, int offset, u8 *to) { mutex_lock(&db->addr_lock); @@ -1024,18 +1078,17 @@ dm9000_read_eeprom(board_info_t *db, int offset, unsigned char *to) mutex_unlock(&db->addr_lock); } -#ifdef DM9000_PROGRAM_EEPROM /* * Write a word data to SROM */ static void -write_srom_word(board_info_t * db, int offset, u16 val) +dm9000_write_eeprom(board_info_t *db, int offset, u8 *data) { mutex_lock(&db->addr_lock); iow(db, DM9000_EPAR, offset); - iow(db, DM9000_EPDRH, ((val >> 8) & 0xff)); - iow(db, DM9000_EPDRL, (val & 0xff)); + iow(db, DM9000_EPDRH, data[1]); + iow(db, DM9000_EPDRL, data[0]); iow(db, DM9000_EPCR, EPCR_WEP | EPCR_ERPRW); mdelay(8); /* same shit */ iow(db, DM9000_EPCR, 0); @@ -1043,6 +1096,7 @@ write_srom_word(board_info_t * db, int offset, u16 val) mutex_unlock(&db->addr_lock); } +#ifdef DM9000_PROGRAM_EEPROM /* * Only for development: * Here we write static data to the eeprom in case -- cgit v1.2.3