From 713b3c9e4c1a6da6b45da6474ed554ed0a48de69 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Wed, 2 Feb 2011 10:19:50 +0000 Subject: e1000e: flush all writebacks before unload The driver was not flushing all writebacks before unloading, possibly causing memory to be written by the hardware after the driver had reinitialized the rings. This adds missing functionality to flush any pending writebacks and is called in all spots where descriptors should be completed before the driver begins processing. Signed-off-by: Jesse Brandeburg Reviewed-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/e1000e/netdev.c | 31 +++++++++++++++++++++---------- 1 file changed, 21 insertions(+), 10 deletions(-) (limited to 'drivers/net/e1000e/netdev.c') diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 174633c93325..3fa110ddb041 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -3344,6 +3344,21 @@ int e1000e_up(struct e1000_adapter *adapter) return 0; } +static void e1000e_flush_descriptors(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + if (!(adapter->flags2 & FLAG2_DMA_BURST)) + return; + + /* flush pending descriptor writebacks to memory */ + ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); + ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD); + + /* execute the writes immediately */ + e1e_flush(); +} + void e1000e_down(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; @@ -3383,6 +3398,9 @@ void e1000e_down(struct e1000_adapter *adapter) if (!pci_channel_offline(adapter->pdev)) e1000e_reset(adapter); + + e1000e_flush_descriptors(adapter); + e1000_clean_tx_ring(adapter); e1000_clean_rx_ring(adapter); @@ -4354,19 +4372,12 @@ link_up: else ew32(ICS, E1000_ICS_RXDMT0); + /* flush pending descriptors to memory before detecting Tx hang */ + e1000e_flush_descriptors(adapter); + /* Force detection of hung controller every watchdog period */ adapter->detect_tx_hung = 1; - /* flush partial descriptors to memory before detecting Tx hang */ - if (adapter->flags2 & FLAG2_DMA_BURST) { - ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); - ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD); - /* - * no need to flush the writes because the timeout code does - * an er32 first thing - */ - } - /* * With 82571 controllers, LAA may be overwritten due to controller * reset from the other port. Set the appropriate LAA in RAR[0] -- cgit v1.2.3