From 8b802a7e94c2ed9c6032a88b3ab9860c55cd6378 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Mon, 10 May 2010 15:01:10 +0000 Subject: e1000e: Cleanup e1000_sw_lcd_config_ich8lan() After every reset all ICH/PCH parts call this function which acquires the swflag, performs a workaround on applicable parts and releases the swflag. There is no reason for parts for which this workaround is not applicable to acquire and release the swflag so the function should just return without doing anything for these parts. This also provides for the indentation of most of the function contents to be shifted left cleaning up the code. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 152 +++++++++++++++++++++---------------------- 1 file changed, 75 insertions(+), 77 deletions(-) (limited to 'drivers/net/e1000e') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 448e12378dbc..61f89275d7c3 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -815,11 +815,16 @@ static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw) **/ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) { + struct e1000_adapter *adapter = hw->adapter; struct e1000_phy_info *phy = &hw->phy; u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask; - s32 ret_val; + s32 ret_val = 0; u16 word_addr, reg_data, reg_addr, phy_page = 0; + if (!(hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) && + !(hw->mac.type == e1000_pchlan)) + return ret_val; + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; @@ -831,97 +836,90 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) * Therefore, after each PHY reset, we will load the * configuration data out of the NVM manually. */ - if ((hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) || - (hw->mac.type == e1000_pchlan)) { - struct e1000_adapter *adapter = hw->adapter; - - /* Check if SW needs to configure the PHY */ - if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) || - (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M) || - (hw->mac.type == e1000_pchlan)) - sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M; - else - sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG; + if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) || + (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M) || + (hw->mac.type == e1000_pchlan)) + sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M; + else + sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG; - data = er32(FEXTNVM); - if (!(data & sw_cfg_mask)) - goto out; + data = er32(FEXTNVM); + if (!(data & sw_cfg_mask)) + goto out; - /* Wait for basic configuration completes before proceeding */ - e1000_lan_init_done_ich8lan(hw); + /* Wait for basic configuration completes before proceeding */ + e1000_lan_init_done_ich8lan(hw); + /* + * Make sure HW does not configure LCD from PHY + * extended configuration before SW configuration + */ + data = er32(EXTCNF_CTRL); + if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) + goto out; + + cnf_size = er32(EXTCNF_SIZE); + cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK; + cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT; + if (!cnf_size) + goto out; + + cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK; + cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT; + + if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) && + (hw->mac.type == e1000_pchlan)) { /* - * Make sure HW does not configure LCD from PHY - * extended configuration before SW configuration + * HW configures the SMBus address and LEDs when the + * OEM and LCD Write Enable bits are set in the NVM. + * When both NVM bits are cleared, SW will configure + * them instead. */ - data = er32(EXTCNF_CTRL); - if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) + data = er32(STRAP); + data &= E1000_STRAP_SMBUS_ADDRESS_MASK; + reg_data = data >> E1000_STRAP_SMBUS_ADDRESS_SHIFT; + reg_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID; + ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, + reg_data); + if (ret_val) goto out; - cnf_size = er32(EXTCNF_SIZE); - cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK; - cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT; - if (!cnf_size) + data = er32(LEDCTL); + ret_val = e1000_write_phy_reg_hv_locked(hw, HV_LED_CONFIG, + (u16)data); + if (ret_val) goto out; + } - cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK; - cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT; - - if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) && - (hw->mac.type == e1000_pchlan)) { - /* - * HW configures the SMBus address and LEDs when the - * OEM and LCD Write Enable bits are set in the NVM. - * When both NVM bits are cleared, SW will configure - * them instead. - */ - data = er32(STRAP); - data &= E1000_STRAP_SMBUS_ADDRESS_MASK; - reg_data = data >> E1000_STRAP_SMBUS_ADDRESS_SHIFT; - reg_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID; - ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, - reg_data); - if (ret_val) - goto out; - - data = er32(LEDCTL); - ret_val = e1000_write_phy_reg_hv_locked(hw, - HV_LED_CONFIG, - (u16)data); - if (ret_val) - goto out; - } - /* Configure LCD from extended configuration region. */ + /* Configure LCD from extended configuration region. */ - /* cnf_base_addr is in DWORD */ - word_addr = (u16)(cnf_base_addr << 1); + /* cnf_base_addr is in DWORD */ + word_addr = (u16)(cnf_base_addr << 1); - for (i = 0; i < cnf_size; i++) { - ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1, - ®_data); - if (ret_val) - goto out; + for (i = 0; i < cnf_size; i++) { + ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1, + ®_data); + if (ret_val) + goto out; - ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1), - 1, ®_addr); - if (ret_val) - goto out; + ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1), + 1, ®_addr); + if (ret_val) + goto out; - /* Save off the PHY page for future writes. */ - if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) { - phy_page = reg_data; - continue; - } + /* Save off the PHY page for future writes. */ + if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) { + phy_page = reg_data; + continue; + } - reg_addr &= PHY_REG_MASK; - reg_addr |= phy_page; + reg_addr &= PHY_REG_MASK; + reg_addr |= phy_page; - ret_val = phy->ops.write_reg_locked(hw, - (u32)reg_addr, - reg_data); - if (ret_val) - goto out; - } + ret_val = phy->ops.write_reg_locked(hw, (u32)reg_addr, + reg_data); + if (ret_val) + goto out; } out: -- cgit v1.2.3