From 33bf1e86231dbd62f06f0ca3cdf5995eb7d077d5 Mon Sep 17 00:00:00 2001 From: Michal Swiatkowski Date: Fri, 1 Mar 2024 12:54:11 +0100 Subject: ice: remove switchdev control plane VSI For slow-path Rx and Tx PF VSI is used. There is no need to have control plane VSI. Remove all code related to it. Eswitch rebuild can't fail without rebuilding control plane VSI. Return void from ice_eswitch_rebuild(). Reviewed-by: Marcin Szycik Signed-off-by: Michal Swiatkowski Tested-by: Sujai Buvaneswaran Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_base.c | 36 +------------------------------ 1 file changed, 1 insertion(+), 35 deletions(-) (limited to 'drivers/net/ethernet/intel/ice/ice_base.c') diff --git a/drivers/net/ethernet/intel/ice/ice_base.c b/drivers/net/ethernet/intel/ice/ice_base.c index d2fd315556a3..8ffae7fe894f 100644 --- a/drivers/net/ethernet/intel/ice/ice_base.c +++ b/drivers/net/ethernet/intel/ice/ice_base.c @@ -263,30 +263,6 @@ static u16 ice_calc_txq_handle(struct ice_vsi *vsi, struct ice_tx_ring *ring, u8 return ring->q_index - vsi->tc_cfg.tc_info[tc].qoffset; } -/** - * ice_eswitch_calc_txq_handle - * @ring: pointer to ring which unique index is needed - * - * To correctly work with many netdevs ring->q_index of Tx rings on switchdev - * VSI can repeat. Hardware ring setup requires unique q_index. Calculate it - * here by finding index in vsi->tx_rings of this ring. - * - * Return ICE_INVAL_Q_INDEX when index wasn't found. Should never happen, - * because VSI is get from ring->vsi, so it has to be present in this VSI. - */ -static u16 ice_eswitch_calc_txq_handle(struct ice_tx_ring *ring) -{ - const struct ice_vsi *vsi = ring->vsi; - int i; - - ice_for_each_txq(vsi, i) { - if (vsi->tx_rings[i] == ring) - return i; - } - - return ICE_INVAL_Q_INDEX; -} - /** * ice_cfg_xps_tx_ring - Configure XPS for a Tx ring * @ring: The Tx ring to configure @@ -353,9 +329,6 @@ ice_setup_tx_ctx(struct ice_tx_ring *ring, struct ice_tlan_ctx *tlan_ctx, u16 pf tlan_ctx->vmvf_num = hw->func_caps.vf_base_id + vsi->vf->vf_id; tlan_ctx->vmvf_type = ICE_TLAN_CTX_VMVF_TYPE_VF; break; - case ICE_VSI_SWITCHDEV_CTRL: - tlan_ctx->vmvf_type = ICE_TLAN_CTX_VMVF_TYPE_VMQ; - break; default: return; } @@ -919,14 +892,7 @@ ice_vsi_cfg_txq(struct ice_vsi *vsi, struct ice_tx_ring *ring, /* Add unique software queue handle of the Tx queue per * TC into the VSI Tx ring */ - if (vsi->type == ICE_VSI_SWITCHDEV_CTRL) { - ring->q_handle = ice_eswitch_calc_txq_handle(ring); - - if (ring->q_handle == ICE_INVAL_Q_INDEX) - return -ENODEV; - } else { - ring->q_handle = ice_calc_txq_handle(vsi, ring, tc); - } + ring->q_handle = ice_calc_txq_handle(vsi, ring, tc); if (ch) status = ice_ena_vsi_txq(vsi->port_info, ch->ch_vsi->idx, 0, -- cgit v1.2.3 From 44ba608db50970dbb7eae1dca13ebcbf9485b4e7 Mon Sep 17 00:00:00 2001 From: Michal Swiatkowski Date: Fri, 1 Mar 2024 12:54:13 +0100 Subject: ice: do switchdev slow-path Rx using PF VSI Add an ICE_RX_FLAG_MULTIDEV flag to Rx ring. If it is set try to find correct port representor. Do it based on src_vsi value stored in flex descriptor. Ids of representor pointers stored in xarray are equal to corresponding src_vsi value. Thanks to that we can directly get correct representor if we have src_vsi value. Set multidev flag during ring configuration. If the mode is switchdev, change the ring descriptor to the one that contains src_vsi value. PF netdev should be reconfigured, do it by calling ice_down() and ice_up() if the netdev was up before configuring switchdev. Reviewed-by: Marcin Szycik Signed-off-by: Michal Swiatkowski Tested-by: Sujai Buvaneswaran Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_base.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/net/ethernet/intel/ice/ice_base.c') diff --git a/drivers/net/ethernet/intel/ice/ice_base.c b/drivers/net/ethernet/intel/ice/ice_base.c index 8ffae7fe894f..662fc395edcc 100644 --- a/drivers/net/ethernet/intel/ice/ice_base.c +++ b/drivers/net/ethernet/intel/ice/ice_base.c @@ -452,6 +452,14 @@ static int ice_setup_rx_ctx(struct ice_rx_ring *ring) /* Rx queue threshold in units of 64 */ rlan_ctx.lrxqthresh = 1; + /* PF acts as uplink for switchdev; set flex descriptor with src_vsi + * metadata and flags to allow redirecting to PR netdev + */ + if (ice_is_eswitch_mode_switchdev(vsi->back)) { + ring->flags |= ICE_RX_FLAGS_MULTIDEV; + rxdid = ICE_RXDID_FLEX_NIC_2; + } + /* Enable Flexible Descriptors in the queue context which * allows this driver to select a specific receive descriptor format * increasing context priority to pick up profile ID; default is 0x01; -- cgit v1.2.3 From b80d01ef9aba6c0824644bbde49b1f4e2955e5d1 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Fri, 22 Mar 2024 14:44:45 -0700 Subject: ice: store VF relative MSI-X index in q_vector->vf_reg_idx The ice physical function driver needs to configure the association of queues and interrupts on behalf of its virtual functions. This is done over virtchnl by the VF sending messages during its initialization phase. These messages contain a vector_id which the VF wants to associate with a given queue. This ID is relative to the VF space, where 0 indicates the control IRQ for non-queue interrupts. When programming the mapping, the PF driver currently passes this vector_id directly to the low level functions for programming. This works for SR-IOV, because the hardware uses the VF-based indexing for interrupts. This won't work for Scalable IOV, which uses PF-based indexing for programming its VSIs. To handle this, the driver needs to be able to look up the proper index to use for programming. For typical IRQs, this would be the q_vector->reg_idx field. The q_vector->reg_idx can't be set to a VF relative value, because it is used when the PF needs to control the interrupt, such as when triggering a software interrupt on stopping the Tx queue. Thus, introduce a new q_vector->vf_reg_idx which can store the VF relative index for registers which expect this. Use this in ice_cfg_interrupt to look up the VF index from the q_vector. This allows removing the vector ID parameter of ice_cfg_interrupt. Also notice that this function returns an int, but then is cast to the virtchnl error enumeration, virtchnl_status_code. Update the return type to indicate it does not return an integer error code. We can't use normal error codes here because the return values are passed across the virtchnl interface. This will allow the future Scalable IOV VFs to correctly look up the index needed for programming the VF queues without breaking SR-IOV. Signed-off-by: Jacob Keller Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_base.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet/intel/ice/ice_base.c') diff --git a/drivers/net/ethernet/intel/ice/ice_base.c b/drivers/net/ethernet/intel/ice/ice_base.c index af0384b37119..687f6cb2b917 100644 --- a/drivers/net/ethernet/intel/ice/ice_base.c +++ b/drivers/net/ethernet/intel/ice/ice_base.c @@ -121,7 +121,7 @@ static int ice_vsi_alloc_q_vector(struct ice_vsi *vsi, u16 v_idx) q_vector->irq.index = -ENOENT; if (vsi->type == ICE_VSI_VF) { - q_vector->reg_idx = ice_calc_vf_reg_idx(vsi->vf, q_vector); + ice_calc_vf_reg_idx(vsi->vf, q_vector); goto out; } else if (vsi->type == ICE_VSI_CTRL && vsi->vf) { struct ice_vsi *ctrl_vsi = ice_get_vf_ctrl_vsi(pf, vsi); @@ -145,6 +145,7 @@ static int ice_vsi_alloc_q_vector(struct ice_vsi *vsi, u16 v_idx) skip_alloc: q_vector->reg_idx = q_vector->irq.index; + q_vector->vf_reg_idx = q_vector->irq.index; /* only set affinity_mask if the CPU is online */ if (cpu_online(v_idx)) -- cgit v1.2.3