From dbf893ee85369debaa05b3c222a40c8ac5273a06 Mon Sep 17 00:00:00 2001
From: Emil Tantilov <emil.s.tantilov@intel.com>
Date: Tue, 8 Feb 2011 09:42:41 +0000
Subject: ixgbe: cleanup logic related to HW semaphores

This change cleans up much of the logic related to the hardware semaphores
on the adapters. There were a number of issues with timings that needed to
be addressed.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_common.c | 42 +++++++++++++++++++++++-----------------
 1 file changed, 24 insertions(+), 18 deletions(-)

(limited to 'drivers/net/ixgbe/ixgbe_common.c')

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index ebbda7d15254..345c32eab4a5 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -603,7 +603,6 @@ s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
 		ixgbe_shift_out_eeprom_bits(hw, data, 16);
 		ixgbe_standby_eeprom(hw);
 
-		msleep(hw->eeprom.semaphore_delay);
 		/* Done with writing - release the EEPROM */
 		ixgbe_release_eeprom(hw);
 	}
@@ -747,7 +746,7 @@ s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg)
 static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw)
 {
 	s32 status = 0;
-	u32 eec = 0;
+	u32 eec;
 	u32 i;
 
 	if (ixgbe_acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0)
@@ -776,15 +775,15 @@ static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw)
 			ixgbe_release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
 			status = IXGBE_ERR_EEPROM;
 		}
-	}
 
-	/* Setup EEPROM for Read/Write */
-	if (status == 0) {
-		/* Clear CS and SK */
-		eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK);
-		IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
-		IXGBE_WRITE_FLUSH(hw);
-		udelay(1);
+		/* Setup EEPROM for Read/Write */
+		if (status == 0) {
+			/* Clear CS and SK */
+			eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK);
+			IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+			IXGBE_WRITE_FLUSH(hw);
+			udelay(1);
+		}
 	}
 	return status;
 }
@@ -798,13 +797,10 @@ static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw)
 static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw)
 {
 	s32 status = IXGBE_ERR_EEPROM;
-	u32 timeout;
+	u32 timeout = 2000;
 	u32 i;
 	u32 swsm;
 
-	/* Set timeout value based on size of EEPROM */
-	timeout = hw->eeprom.word_size + 1;
-
 	/* Get SMBI software semaphore between device drivers first */
 	for (i = 0; i < timeout; i++) {
 		/*
@@ -816,7 +812,7 @@ static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw)
 			status = 0;
 			break;
 		}
-		msleep(1);
+		udelay(50);
 	}
 
 	/* Now get the semaphore between SW/FW through the SWESMBI bit */
@@ -844,11 +840,14 @@ static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw)
 		 * was not granted because we don't have access to the EEPROM
 		 */
 		if (i >= timeout) {
-			hw_dbg(hw, "Driver can't access the Eeprom - Semaphore "
+			hw_dbg(hw, "SWESMBI Software EEPROM semaphore "
 			       "not granted.\n");
 			ixgbe_release_eeprom_semaphore(hw);
 			status = IXGBE_ERR_EEPROM;
 		}
+	} else {
+		hw_dbg(hw, "Software semaphore SMBI between device drivers "
+		       "not granted.\n");
 	}
 
 	return status;
@@ -1081,10 +1080,13 @@ static void ixgbe_release_eeprom(struct ixgbe_hw *hw)
 	IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
 
 	ixgbe_release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+
+	/* Delay before attempt to obtain semaphore again to allow FW access */
+	msleep(hw->eeprom.semaphore_delay);
 }
 
 /**
- *  ixgbe_calc_eeprom_checksum - Calculates and returns the checksum
+ *  ixgbe_calc_eeprom_checksum_generic - Calculates and returns the checksum
  *  @hw: pointer to hardware structure
  **/
 u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw)
@@ -2206,6 +2208,10 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
 	s32 timeout = 200;
 
 	while (timeout) {
+		/*
+		 * SW EEPROM semaphore bit is used for access to all
+		 * SW_FW_SYNC/GSSR bits (not just EEPROM)
+		 */
 		if (ixgbe_get_eeprom_semaphore(hw))
 			return IXGBE_ERR_SWFW_SYNC;
 
@@ -2223,7 +2229,7 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
 	}
 
 	if (!timeout) {
-		hw_dbg(hw, "Driver can't access resource, GSSR timeout.\n");
+		hw_dbg(hw, "Driver can't access resource, SW_FW_SYNC timeout.\n");
 		return IXGBE_ERR_SWFW_SYNC;
 	}
 
-- 
cgit v1.2.3


From a4297dc2f49d46d5452a948210be44442236e685 Mon Sep 17 00:00:00 2001
From: Emil Tantilov <emil.s.tantilov@intel.com>
Date: Mon, 14 Feb 2011 08:45:13 +0000
Subject: ixgbe: Add ability to double reset on failure to clear master enable

Double resets are required for recovery from certain error conditions.
Between resets, it is necessary to stall to allow time for any pending HW
events to complete. We use 1usec since that is what is needed for
ixgbe_disable_pcie_master(). The second reset then clears out any effects
of those events.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_common.c | 47 +++++++++++++++++++++++++++++++++++-----
 1 file changed, 41 insertions(+), 6 deletions(-)

(limited to 'drivers/net/ixgbe/ixgbe_common.c')

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 345c32eab4a5..6d87c7491d10 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -454,8 +454,7 @@ s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw)
 	 * Prevent the PCI-E bus from from hanging by disabling PCI-E master
 	 * access and verify no pending requests
 	 */
-	if (ixgbe_disable_pcie_master(hw) != 0)
-		hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+	ixgbe_disable_pcie_master(hw);
 
 	return 0;
 }
@@ -2161,10 +2160,16 @@ out:
  **/
 s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
 {
+	struct ixgbe_adapter *adapter = hw->back;
 	u32 i;
 	u32 reg_val;
 	u32 number_of_queues;
-	s32 status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
+	s32 status = 0;
+	u16 dev_status = 0;
+
+	/* Just jump out if bus mastering is already disabled */
+	if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO))
+		goto out;
 
 	/* Disable the receive unit by stopping each queue */
 	number_of_queues = hw->mac.max_rx_queues;
@@ -2181,13 +2186,43 @@ s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
 	IXGBE_WRITE_REG(hw, IXGBE_CTRL, reg_val);
 
 	for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) {
-		if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) {
-			status = 0;
+		if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO))
+			goto check_device_status;
+		udelay(100);
+	}
+
+	hw_dbg(hw, "GIO Master Disable bit didn't clear - requesting resets\n");
+	status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
+
+	/*
+	 * Before proceeding, make sure that the PCIe block does not have
+	 * transactions pending.
+	 */
+check_device_status:
+	for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) {
+		pci_read_config_word(adapter->pdev, IXGBE_PCI_DEVICE_STATUS,
+							 &dev_status);
+		if (!(dev_status & IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING))
 			break;
-		}
 		udelay(100);
 	}
 
+	if (i == IXGBE_PCI_MASTER_DISABLE_TIMEOUT)
+		hw_dbg(hw, "PCIe transaction pending bit also did not clear.\n");
+	else
+		goto out;
+
+	/*
+	 * Two consecutive resets are required via CTRL.RST per datasheet
+	 * 5.2.5.3.2 Master Disable.  We set a flag to inform the reset routine
+	 * of this need.  The first reset prevents new master requests from
+	 * being issued by our device.  We then must wait 1usec for any
+	 * remaining completions from the PCIe bus to trickle in, and then reset
+	 * again to clear out any effects they may have had on our device.
+	 */
+	 hw->mac.flags |= IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+
+out:
 	return status;
 }
 
-- 
cgit v1.2.3


From 48de36c5656113ce6cfe4207da2f90f46917e53d Mon Sep 17 00:00:00 2001
From: Emil Tantilov <emil.s.tantilov@intel.com>
Date: Wed, 16 Feb 2011 01:38:08 +0000
Subject: ixgbe: Check link wants report current link state

Currently check link reports the link state as down, if at any time
the link had previously gone down since the last time the LINKS
register was read.  This does not accurately reflect the function of
the check link call, which should be to return the CURRENT link
state. Code now reads the LINKS registers twice, once to clear the
previous and again to get the current value.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_common.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'drivers/net/ixgbe/ixgbe_common.c')

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 6d87c7491d10..7e3bb559f42d 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -2769,10 +2769,19 @@ s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw)
 s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
                                bool *link_up, bool link_up_wait_to_complete)
 {
-	u32 links_reg;
+	u32 links_reg, links_orig;
 	u32 i;
 
+	/* clear the old state */
+	links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS);
+
 	links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+
+	if (links_orig != links_reg) {
+		hw_dbg(hw, "LINKS changed from %08X to %08X\n",
+		       links_orig, links_reg);
+	}
+
 	if (link_up_wait_to_complete) {
 		for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
 			if (links_reg & IXGBE_LINKS_UP) {
-- 
cgit v1.2.3


From c700f4e6f55c42c9aeacf365bd178f97625e00df Mon Sep 17 00:00:00 2001
From: Emil Tantilov <emil.s.tantilov@intel.com>
Date: Thu, 17 Feb 2011 11:34:58 +0000
Subject: ixgbe: Bounds checking for set_rar, clear_rar, set_vmdq, clear_vmdq

This change makes it so that out of bounds requests to these calls will
now return IXGBE_ERR_INVALID_ARGUMENT instead of returning 0.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_common.c | 153 ++++++++++++++++++++-------------------
 1 file changed, 78 insertions(+), 75 deletions(-)

(limited to 'drivers/net/ixgbe/ixgbe_common.c')

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 7e3bb559f42d..882a35092024 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -1239,37 +1239,37 @@ s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
 	u32 rar_low, rar_high;
 	u32 rar_entries = hw->mac.num_rar_entries;
 
+	/* Make sure we are using a valid rar index range */
+	if (index >= rar_entries) {
+		hw_dbg(hw, "RAR index %d is out of range.\n", index);
+		return IXGBE_ERR_INVALID_ARGUMENT;
+	}
+
 	/* setup VMDq pool selection before this RAR gets enabled */
 	hw->mac.ops.set_vmdq(hw, index, vmdq);
 
-	/* Make sure we are using a valid rar index range */
-	if (index < rar_entries) {
-		/*
-		 * HW expects these in little endian so we reverse the byte
-		 * order from network order (big endian) to little endian
-		 */
-		rar_low = ((u32)addr[0] |
-		           ((u32)addr[1] << 8) |
-		           ((u32)addr[2] << 16) |
-		           ((u32)addr[3] << 24));
-		/*
-		 * Some parts put the VMDq setting in the extra RAH bits,
-		 * so save everything except the lower 16 bits that hold part
-		 * of the address and the address valid bit.
-		 */
-		rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
-		rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
-		rar_high |= ((u32)addr[4] | ((u32)addr[5] << 8));
+	/*
+	 * HW expects these in little endian so we reverse the byte
+	 * order from network order (big endian) to little endian
+	 */
+	rar_low = ((u32)addr[0] |
+		   ((u32)addr[1] << 8) |
+		   ((u32)addr[2] << 16) |
+		   ((u32)addr[3] << 24));
+	/*
+	 * Some parts put the VMDq setting in the extra RAH bits,
+	 * so save everything except the lower 16 bits that hold part
+	 * of the address and the address valid bit.
+	 */
+	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+	rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
+	rar_high |= ((u32)addr[4] | ((u32)addr[5] << 8));
 
-		if (enable_addr != 0)
-			rar_high |= IXGBE_RAH_AV;
+	if (enable_addr != 0)
+		rar_high |= IXGBE_RAH_AV;
 
-		IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low);
-		IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
-	} else {
-		hw_dbg(hw, "RAR index %d is out of range.\n", index);
-		return IXGBE_ERR_RAR_INDEX;
-	}
+	IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low);
+	IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
 
 	return 0;
 }
@@ -1287,22 +1287,22 @@ s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index)
 	u32 rar_entries = hw->mac.num_rar_entries;
 
 	/* Make sure we are using a valid rar index range */
-	if (index < rar_entries) {
-		/*
-		 * Some parts put the VMDq setting in the extra RAH bits,
-		 * so save everything except the lower 16 bits that hold part
-		 * of the address and the address valid bit.
-		 */
-		rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
-		rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
-
-		IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0);
-		IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
-	} else {
+	if (index >= rar_entries) {
 		hw_dbg(hw, "RAR index %d is out of range.\n", index);
-		return IXGBE_ERR_RAR_INDEX;
+		return IXGBE_ERR_INVALID_ARGUMENT;
 	}
 
+	/*
+	 * Some parts put the VMDq setting in the extra RAH bits,
+	 * so save everything except the lower 16 bits that hold part
+	 * of the address and the address valid bit.
+	 */
+	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+	rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
+
+	IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0);
+	IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+
 	/* clear VMDq pool/queue selection for this RAR */
 	hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL);
 
@@ -2468,37 +2468,38 @@ s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
 	u32 mpsar_lo, mpsar_hi;
 	u32 rar_entries = hw->mac.num_rar_entries;
 
-	if (rar < rar_entries) {
-		mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
-		mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
+	/* Make sure we are using a valid rar index range */
+	if (rar >= rar_entries) {
+		hw_dbg(hw, "RAR index %d is out of range.\n", rar);
+		return IXGBE_ERR_INVALID_ARGUMENT;
+	}
 
-		if (!mpsar_lo && !mpsar_hi)
-			goto done;
+	mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
+	mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
 
-		if (vmdq == IXGBE_CLEAR_VMDQ_ALL) {
-			if (mpsar_lo) {
-				IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0);
-				mpsar_lo = 0;
-			}
-			if (mpsar_hi) {
-				IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0);
-				mpsar_hi = 0;
-			}
-		} else if (vmdq < 32) {
-			mpsar_lo &= ~(1 << vmdq);
-			IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo);
-		} else {
-			mpsar_hi &= ~(1 << (vmdq - 32));
-			IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi);
-		}
+	if (!mpsar_lo && !mpsar_hi)
+		goto done;
 
-		/* was that the last pool using this rar? */
-		if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0)
-			hw->mac.ops.clear_rar(hw, rar);
+	if (vmdq == IXGBE_CLEAR_VMDQ_ALL) {
+		if (mpsar_lo) {
+			IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0);
+			mpsar_lo = 0;
+		}
+		if (mpsar_hi) {
+			IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0);
+			mpsar_hi = 0;
+		}
+	} else if (vmdq < 32) {
+		mpsar_lo &= ~(1 << vmdq);
+		IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo);
 	} else {
-		hw_dbg(hw, "RAR index %d is out of range.\n", rar);
+		mpsar_hi &= ~(1 << (vmdq - 32));
+		IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi);
 	}
 
+	/* was that the last pool using this rar? */
+	if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0)
+		hw->mac.ops.clear_rar(hw, rar);
 done:
 	return 0;
 }
@@ -2514,18 +2515,20 @@ s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
 	u32 mpsar;
 	u32 rar_entries = hw->mac.num_rar_entries;
 
-	if (rar < rar_entries) {
-		if (vmdq < 32) {
-			mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
-			mpsar |= 1 << vmdq;
-			IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar);
-		} else {
-			mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
-			mpsar |= 1 << (vmdq - 32);
-			IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar);
-		}
-	} else {
+	/* Make sure we are using a valid rar index range */
+	if (rar >= rar_entries) {
 		hw_dbg(hw, "RAR index %d is out of range.\n", rar);
+		return IXGBE_ERR_INVALID_ARGUMENT;
+	}
+
+	if (vmdq < 32) {
+		mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
+		mpsar |= 1 << vmdq;
+		IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar);
+	} else {
+		mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
+		mpsar |= 1 << (vmdq - 32);
+		IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar);
 	}
 	return 0;
 }
-- 
cgit v1.2.3


From 80960ab040dd6b3a82bfb2db9b1aaf5d6ccffbb7 Mon Sep 17 00:00:00 2001
From: Emil Tantilov <emil.s.tantilov@intel.com>
Date: Fri, 18 Feb 2011 08:58:27 +0000
Subject: ixgbe: rework ixgbe MTA handling to not drop packets

This change modifies the ixgbe drivers so that it will not drop the
multicast filters while updating them.  Instead it uses an intermediate
table to store the filter and then writes that filter to the hardware.

Based on original patch from Dave Boutcher <daveboutcher@gmail.com>

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reported-by: Dave Boutcher <daveboutcher@gmail.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_common.c | 68 ++++++----------------------------------
 1 file changed, 9 insertions(+), 59 deletions(-)

(limited to 'drivers/net/ixgbe/ixgbe_common.c')

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 882a35092024..b94634f41689 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -46,8 +46,6 @@ static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
 static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
 static void ixgbe_release_eeprom(struct ixgbe_hw *hw);
 
-static void ixgbe_enable_rar(struct ixgbe_hw *hw, u32 index);
-static void ixgbe_disable_rar(struct ixgbe_hw *hw, u32 index);
 static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr);
 static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq);
 static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num);
@@ -1309,38 +1307,6 @@ s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index)
 	return 0;
 }
 
-/**
- *  ixgbe_enable_rar - Enable Rx address register
- *  @hw: pointer to hardware structure
- *  @index: index into the RAR table
- *
- *  Enables the select receive address register.
- **/
-static void ixgbe_enable_rar(struct ixgbe_hw *hw, u32 index)
-{
-	u32 rar_high;
-
-	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
-	rar_high |= IXGBE_RAH_AV;
-	IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
-}
-
-/**
- *  ixgbe_disable_rar - Disable Rx address register
- *  @hw: pointer to hardware structure
- *  @index: index into the RAR table
- *
- *  Disables the select receive address register.
- **/
-static void ixgbe_disable_rar(struct ixgbe_hw *hw, u32 index)
-{
-	u32 rar_high;
-
-	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
-	rar_high &= (~IXGBE_RAH_AV);
-	IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
-}
-
 /**
  *  ixgbe_init_rx_addrs_generic - Initializes receive address filters.
  *  @hw: pointer to hardware structure
@@ -1387,7 +1353,6 @@ s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw)
 	}
 
 	/* Clear the MTA */
-	hw->addr_ctrl.mc_addr_in_rar_count = 0;
 	hw->addr_ctrl.mta_in_use = 0;
 	IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type);
 
@@ -1421,8 +1386,7 @@ static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
 	 * else put the controller into promiscuous mode
 	 */
 	if (hw->addr_ctrl.rar_used_count < rar_entries) {
-		rar = hw->addr_ctrl.rar_used_count -
-		      hw->addr_ctrl.mc_addr_in_rar_count;
+		rar = hw->addr_ctrl.rar_used_count;
 		hw->mac.ops.set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV);
 		hw_dbg(hw, "Added a secondary address to RAR[%d]\n", rar);
 		hw->addr_ctrl.rar_used_count++;
@@ -1551,7 +1515,6 @@ static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr)
 	u32 vector;
 	u32 vector_bit;
 	u32 vector_reg;
-	u32 mta_reg;
 
 	hw->addr_ctrl.mta_in_use++;
 
@@ -1569,9 +1532,7 @@ static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr)
 	 */
 	vector_reg = (vector >> 5) & 0x7F;
 	vector_bit = vector & 0x1F;
-	mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
-	mta_reg |= (1 << vector_bit);
-	IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
+	hw->mac.mta_shadow[vector_reg] |= (1 << vector_bit);
 }
 
 /**
@@ -1597,18 +1558,21 @@ s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw,
 	hw->addr_ctrl.num_mc_addrs = netdev_mc_count(netdev);
 	hw->addr_ctrl.mta_in_use = 0;
 
-	/* Clear the MTA */
+	/* Clear mta_shadow */
 	hw_dbg(hw, " Clearing MTA\n");
-	for (i = 0; i < hw->mac.mcft_size; i++)
-		IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0);
+	memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
 
-	/* Add the new addresses */
+	/* Update mta shadow */
 	netdev_for_each_mc_addr(ha, netdev) {
 		hw_dbg(hw, " Adding the multicast addresses:\n");
 		ixgbe_set_mta(hw, ha->addr);
 	}
 
 	/* Enable mta */
+	for (i = 0; i < hw->mac.mcft_size; i++)
+		IXGBE_WRITE_REG_ARRAY(hw, IXGBE_MTA(0), i,
+				      hw->mac.mta_shadow[i]);
+
 	if (hw->addr_ctrl.mta_in_use > 0)
 		IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL,
 		                IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type);
@@ -1625,15 +1589,8 @@ s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw,
  **/
 s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw)
 {
-	u32 i;
-	u32 rar_entries = hw->mac.num_rar_entries;
 	struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
 
-	if (a->mc_addr_in_rar_count > 0)
-		for (i = (rar_entries - a->mc_addr_in_rar_count);
-		     i < rar_entries; i++)
-			ixgbe_enable_rar(hw, i);
-
 	if (a->mta_in_use > 0)
 		IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, IXGBE_MCSTCTRL_MFE |
 		                hw->mac.mc_filter_type);
@@ -1649,15 +1606,8 @@ s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw)
  **/
 s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw)
 {
-	u32 i;
-	u32 rar_entries = hw->mac.num_rar_entries;
 	struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
 
-	if (a->mc_addr_in_rar_count > 0)
-		for (i = (rar_entries - a->mc_addr_in_rar_count);
-		     i < rar_entries; i++)
-			ixgbe_disable_rar(hw, i);
-
 	if (a->mta_in_use > 0)
 		IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type);
 
-- 
cgit v1.2.3


From 79d5892521144d455114e4820eb30fec802b9c39 Mon Sep 17 00:00:00 2001
From: Emil Tantilov <emil.s.tantilov@intel.com>
Date: Sat, 19 Feb 2011 08:43:34 +0000
Subject: ixgbe: Drop unused code for setting up unicast addresses

This change removes the unused code that was setting up the uc_addr_list.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_common.c | 99 ----------------------------------------
 1 file changed, 99 deletions(-)

(limited to 'drivers/net/ixgbe/ixgbe_common.c')

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index b94634f41689..4fa195e88f3e 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -47,7 +47,6 @@ static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
 static void ixgbe_release_eeprom(struct ixgbe_hw *hw);
 
 static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr);
-static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq);
 static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num);
 
 /**
@@ -1366,104 +1365,6 @@ s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw)
 	return 0;
 }
 
-/**
- *  ixgbe_add_uc_addr - Adds a secondary unicast address.
- *  @hw: pointer to hardware structure
- *  @addr: new address
- *
- *  Adds it to unused receive address register or goes into promiscuous mode.
- **/
-static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
-{
-	u32 rar_entries = hw->mac.num_rar_entries;
-	u32 rar;
-
-	hw_dbg(hw, " UC Addr = %.2X %.2X %.2X %.2X %.2X %.2X\n",
-	          addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);
-
-	/*
-	 * Place this address in the RAR if there is room,
-	 * else put the controller into promiscuous mode
-	 */
-	if (hw->addr_ctrl.rar_used_count < rar_entries) {
-		rar = hw->addr_ctrl.rar_used_count;
-		hw->mac.ops.set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV);
-		hw_dbg(hw, "Added a secondary address to RAR[%d]\n", rar);
-		hw->addr_ctrl.rar_used_count++;
-	} else {
-		hw->addr_ctrl.overflow_promisc++;
-	}
-
-	hw_dbg(hw, "ixgbe_add_uc_addr Complete\n");
-}
-
-/**
- *  ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses
- *  @hw: pointer to hardware structure
- *  @netdev: pointer to net device structure
- *
- *  The given list replaces any existing list.  Clears the secondary addrs from
- *  receive address registers.  Uses unused receive address registers for the
- *  first secondary addresses, and falls back to promiscuous mode as needed.
- *
- *  Drivers using secondary unicast addresses must set user_set_promisc when
- *  manually putting the device into promiscuous mode.
- **/
-s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw,
-				      struct net_device *netdev)
-{
-	u32 i;
-	u32 old_promisc_setting = hw->addr_ctrl.overflow_promisc;
-	u32 uc_addr_in_use;
-	u32 fctrl;
-	struct netdev_hw_addr *ha;
-
-	/*
-	 * Clear accounting of old secondary address list,
-	 * don't count RAR[0]
-	 */
-	uc_addr_in_use = hw->addr_ctrl.rar_used_count - 1;
-	hw->addr_ctrl.rar_used_count -= uc_addr_in_use;
-	hw->addr_ctrl.overflow_promisc = 0;
-
-	/* Zero out the other receive addresses */
-	hw_dbg(hw, "Clearing RAR[1-%d]\n", uc_addr_in_use + 1);
-	for (i = 0; i < uc_addr_in_use; i++) {
-		IXGBE_WRITE_REG(hw, IXGBE_RAL(1+i), 0);
-		IXGBE_WRITE_REG(hw, IXGBE_RAH(1+i), 0);
-	}
-
-	/* Add the new addresses */
-	netdev_for_each_uc_addr(ha, netdev) {
-		hw_dbg(hw, " Adding the secondary addresses:\n");
-		ixgbe_add_uc_addr(hw, ha->addr, 0);
-	}
-
-	if (hw->addr_ctrl.overflow_promisc) {
-		/* enable promisc if not already in overflow or set by user */
-		if (!old_promisc_setting && !hw->addr_ctrl.user_set_promisc) {
-			hw_dbg(hw, " Entering address overflow promisc mode\n");
-			fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
-			fctrl |= IXGBE_FCTRL_UPE;
-			IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
-			hw->addr_ctrl.uc_set_promisc = true;
-		}
-	} else {
-		/* only disable if set by overflow, not by user */
-		if ((old_promisc_setting && hw->addr_ctrl.uc_set_promisc) &&
-		   !(hw->addr_ctrl.user_set_promisc)) {
-			hw_dbg(hw, " Leaving address overflow promisc mode\n");
-			fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
-			fctrl &= ~IXGBE_FCTRL_UPE;
-			IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
-			hw->addr_ctrl.uc_set_promisc = false;
-		}
-	}
-
-	hw_dbg(hw, "ixgbe_update_uc_addr_list_generic Complete\n");
-	return 0;
-}
-
 /**
  *  ixgbe_mta_vector - Determines bit-vector in multicast table to set
  *  @hw: pointer to hardware structure
-- 
cgit v1.2.3


From 63d778df6d817ea69cadd701abbfa1c491623b50 Mon Sep 17 00:00:00 2001
From: Emil Tantilov <emil.s.tantilov@intel.com>
Date: Sat, 19 Feb 2011 08:43:39 +0000
Subject: ixgbe: Specific check for 100 Full link speed

This patch specifically checks for 100 Full link speed instead of
assuming we are linked at 100 if not linked at 10G and 1G.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_common.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'drivers/net/ixgbe/ixgbe_common.c')

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 4fa195e88f3e..a12f7c73e27d 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -2658,10 +2658,13 @@ s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
 	    IXGBE_LINKS_SPEED_10G_82599)
 		*speed = IXGBE_LINK_SPEED_10GB_FULL;
 	else if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
-	         IXGBE_LINKS_SPEED_1G_82599)
+		 IXGBE_LINKS_SPEED_1G_82599)
 		*speed = IXGBE_LINK_SPEED_1GB_FULL;
-	else
+	else if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
+		 IXGBE_LINKS_SPEED_100_82599)
 		*speed = IXGBE_LINK_SPEED_100_FULL;
+	else
+		*speed = IXGBE_LINK_SPEED_UNKNOWN;
 
 	/* if link is down, zero out the current_mode */
 	if (*link_up == false) {
-- 
cgit v1.2.3


From 8c7bea32c4ebe02dbb574a49db418036da177326 Mon Sep 17 00:00:00 2001
From: Emil Tantilov <emil.s.tantilov@intel.com>
Date: Sat, 19 Feb 2011 08:43:44 +0000
Subject: ixgbe: Numerous whitespace / formatting cleanups

This patch contains a number of whitespace and formatting cleanups.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_common.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers/net/ixgbe/ixgbe_common.c')

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index a12f7c73e27d..33f568cff060 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -1188,7 +1188,7 @@ s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw)
 	if (status == 0) {
 		checksum = hw->eeprom.ops.calc_checksum(hw);
 		status = hw->eeprom.ops.write(hw, IXGBE_EEPROM_CHECKSUM,
-		                            checksum);
+					      checksum);
 	} else {
 		hw_dbg(hw, "EEPROM read failed\n");
 	}
@@ -1555,7 +1555,9 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
 	 * 2: Tx flow control is enabled (we can send pause frames but
 	 *    we do not support receiving pause frames).
 	 * 3: Both Rx and Tx flow control (symmetric) are enabled.
+#ifdef CONFIG_DCB
 	 * 4: Priority Flow Control is enabled.
+#endif
 	 * other: Invalid.
 	 */
 	switch (hw->fc.current_mode) {
@@ -2392,7 +2394,6 @@ s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw)
 {
 	int i;
 
-
 	for (i = 0; i < 128; i++)
 		IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0);
 
@@ -2621,7 +2622,7 @@ s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw)
  *  Reads the links register to determine if link is up and the current speed
  **/
 s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
-                               bool *link_up, bool link_up_wait_to_complete)
+				 bool *link_up, bool link_up_wait_to_complete)
 {
 	u32 links_reg, links_orig;
 	u32 i;
-- 
cgit v1.2.3


From 5e655105e3e19d746f9e95c514b014c11c3d1b6a Mon Sep 17 00:00:00 2001
From: Don Skidmore <donald.c.skidmore@intel.com>
Date: Fri, 25 Feb 2011 01:58:04 +0000
Subject: ixgbe: add function pointer for semaphore function

The X540 devices grabs semaphores differently than 82599 and 82598
devices do.  They do however also grab them in allot of the same
functions.  So I'm adding a new MAC operation function pointer to
allow us to use the correct function based on our MAC type.  I'm also
changing all the semaphore calls to use this new function pointer.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_common.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net/ixgbe/ixgbe_common.c')

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 33f568cff060..bd14ea4d9570 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -745,7 +745,7 @@ static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw)
 	u32 eec;
 	u32 i;
 
-	if (ixgbe_acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0)
+	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0)
 		status = IXGBE_ERR_SWFW_SYNC;
 
 	if (status == 0) {
@@ -768,7 +768,7 @@ static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw)
 			IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
 			hw_dbg(hw, "Could not acquire EEPROM grant\n");
 
-			ixgbe_release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+			hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
 			status = IXGBE_ERR_EEPROM;
 		}
 
-- 
cgit v1.2.3


From a52055e055f5b551c0814c4381e43b204f9db777 Mon Sep 17 00:00:00 2001
From: Don Skidmore <donald.c.skidmore@intel.com>
Date: Wed, 23 Feb 2011 09:58:39 +0000
Subject: ixgbe: cleanup copyright string for 2011

Updating the copyrights for 2011 as well as make the ixgbe_copyright string
a constant.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/ixgbe/ixgbe_common.c')

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index bd14ea4d9570..a7fb2e00f766 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2010 Intel Corporation.
+  Copyright(c) 1999 - 2011 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
-- 
cgit v1.2.3


From 90827996c59135b73e54463dac38710d5ddf1d2a Mon Sep 17 00:00:00 2001
From: Don Skidmore <donald.c.skidmore@intel.com>
Date: Sat, 5 Mar 2011 18:59:20 -0800
Subject: ixgbe: fix missing function pointer conversion

In the previous commit:
  commit 5e655105e3e19d746f9e95c514b014c11c3d1b6a
  Author: Don Skidmore <donald.c.skidmore@intel.com>
  Date:   Fri Feb 25 01:58:04 2011 +0000

  ixgbe: add function pointer for semaphore function

there was one release of the semaphore function call which
did not get converted to a function pointer.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/ixgbe/ixgbe_common.c')

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index a7fb2e00f766..94a56217027c 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -1075,7 +1075,7 @@ static void ixgbe_release_eeprom(struct ixgbe_hw *hw)
 	eec &= ~IXGBE_EEC_REQ;
 	IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
 
-	ixgbe_release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
 
 	/* Delay before attempt to obtain semaphore again to allow FW access */
 	msleep(hw->eeprom.semaphore_delay);
-- 
cgit v1.2.3


From 667c75651025049b39a2b5b83d8fc09a7967cce3 Mon Sep 17 00:00:00 2001
From: Emil Tantilov <emil.s.tantilov@intel.com>
Date: Sat, 26 Feb 2011 06:40:05 +0000
Subject: ixgbe: clear correct counters for flow control on 82599

The 82599 was not correctly having some of it's counters cleared for flow
control.  This change corrects that.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_common.c | 34 +++++++++++++++++++++++++++-------
 1 file changed, 27 insertions(+), 7 deletions(-)

(limited to 'drivers/net/ixgbe/ixgbe_common.c')

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 94a56217027c..85cc30143738 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -136,17 +136,29 @@ s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw)
 	IXGBE_READ_REG(hw, IXGBE_MRFC);
 	IXGBE_READ_REG(hw, IXGBE_RLEC);
 	IXGBE_READ_REG(hw, IXGBE_LXONTXC);
-	IXGBE_READ_REG(hw, IXGBE_LXONRXC);
 	IXGBE_READ_REG(hw, IXGBE_LXOFFTXC);
-	IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
+	if (hw->mac.type >= ixgbe_mac_82599EB) {
+		IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
+		IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT);
+	} else {
+		IXGBE_READ_REG(hw, IXGBE_LXONRXC);
+		IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
+	}
 
 	for (i = 0; i < 8; i++) {
 		IXGBE_READ_REG(hw, IXGBE_PXONTXC(i));
-		IXGBE_READ_REG(hw, IXGBE_PXONRXC(i));
 		IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i));
-		IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i));
+		if (hw->mac.type >= ixgbe_mac_82599EB) {
+			IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i));
+			IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i));
+		} else {
+			IXGBE_READ_REG(hw, IXGBE_PXONRXC(i));
+			IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i));
+		}
 	}
-
+	if (hw->mac.type >= ixgbe_mac_82599EB)
+		for (i = 0; i < 8; i++)
+			IXGBE_READ_REG(hw, IXGBE_PXON2OFFCNT(i));
 	IXGBE_READ_REG(hw, IXGBE_PRC64);
 	IXGBE_READ_REG(hw, IXGBE_PRC127);
 	IXGBE_READ_REG(hw, IXGBE_PRC255);
@@ -184,9 +196,17 @@ s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw)
 	IXGBE_READ_REG(hw, IXGBE_BPTC);
 	for (i = 0; i < 16; i++) {
 		IXGBE_READ_REG(hw, IXGBE_QPRC(i));
-		IXGBE_READ_REG(hw, IXGBE_QBRC(i));
 		IXGBE_READ_REG(hw, IXGBE_QPTC(i));
-		IXGBE_READ_REG(hw, IXGBE_QBTC(i));
+		if (hw->mac.type >= ixgbe_mac_82599EB) {
+			IXGBE_READ_REG(hw, IXGBE_QBRC_L(i));
+			IXGBE_READ_REG(hw, IXGBE_QBRC_H(i));
+			IXGBE_READ_REG(hw, IXGBE_QBTC_L(i));
+			IXGBE_READ_REG(hw, IXGBE_QBTC_H(i));
+			IXGBE_READ_REG(hw, IXGBE_QPRDC(i));
+		} else {
+			IXGBE_READ_REG(hw, IXGBE_QBRC(i));
+			IXGBE_READ_REG(hw, IXGBE_QBTC(i));
+		}
 	}
 
 	return 0;
-- 
cgit v1.2.3


From a3aeea0ec8d3af854edf7dc983dc8cbe803a43e8 Mon Sep 17 00:00:00 2001
From: Emil Tantilov <emil.s.tantilov@intel.com>
Date: Sat, 26 Feb 2011 06:40:11 +0000
Subject: ixgbe: Add x540 statistic counter definitions

Add defines to accumulate and display x540 PHY statistic counters on
transmit/receive.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_common.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'drivers/net/ixgbe/ixgbe_common.c')

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 85cc30143738..561f666618e4 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -209,6 +209,15 @@ s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw)
 		}
 	}
 
+	if (hw->mac.type == ixgbe_mac_X540) {
+		if (hw->phy.id == 0)
+			hw->phy.ops.identify(hw);
+		hw->phy.ops.read_reg(hw, 0x3, IXGBE_PCRC8ECL, &i);
+		hw->phy.ops.read_reg(hw, 0x3, IXGBE_PCRC8ECH, &i);
+		hw->phy.ops.read_reg(hw, 0x3, IXGBE_LDPCECL, &i);
+		hw->phy.ops.read_reg(hw, 0x3, IXGBE_LDPCECH, &i);
+	}
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From 0b0c2b31bdf8d6fb5c14ae70894453ac44d64672 Mon Sep 17 00:00:00 2001
From: Emil Tantilov <emil.s.tantilov@intel.com>
Date: Sat, 26 Feb 2011 06:40:16 +0000
Subject: ixgbe: Enable flow control pause parameter auto-negotiation support

This patch enables flow control pause parameters auto-negotiation support
to 82599 based 10G Base-T, backplane devices and multi-speed fiber optics
modules at 1G speed

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_common.c | 460 ++++++++++++++++++++++-----------------
 1 file changed, 265 insertions(+), 195 deletions(-)

(limited to 'drivers/net/ixgbe/ixgbe_common.c')

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 561f666618e4..7a6a3fbee19f 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -47,6 +47,12 @@ static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
 static void ixgbe_release_eeprom(struct ixgbe_hw *hw);
 
 static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr);
+static s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw);
+static s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw);
+static s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw);
+static s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw);
+static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
+			      u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm);
 static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num);
 
 /**
@@ -1566,7 +1572,7 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
 #endif /* CONFIG_DCB */
 	/* Negotiate the fc mode to use */
 	ret_val = ixgbe_fc_autoneg(hw);
-	if (ret_val)
+	if (ret_val == IXGBE_ERR_FLOW_CONTROL)
 		goto out;
 
 	/* Disable any previous flow control settings */
@@ -1674,12 +1680,13 @@ out:
  **/
 s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw)
 {
-	s32 ret_val = 0;
+	s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
 	ixgbe_link_speed speed;
-	u32 pcs_anadv_reg, pcs_lpab_reg, linkstat;
-	u32 links2, anlp1_reg, autoc_reg, links;
 	bool link_up;
 
+	if (hw->fc.disable_fc_autoneg)
+		goto out;
+
 	/*
 	 * AN should have completed when the cable was plugged in.
 	 * Look for reasons to bail out.  Bail out if:
@@ -1690,153 +1697,199 @@ s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw)
 	 * So use link_up_wait_to_complete=false.
 	 */
 	hw->mac.ops.check_link(hw, &speed, &link_up, false);
-
-	if (hw->fc.disable_fc_autoneg || (!link_up)) {
-		hw->fc.fc_was_autonegged = false;
-		hw->fc.current_mode = hw->fc.requested_mode;
+	if (!link_up) {
+		ret_val = IXGBE_ERR_FLOW_CONTROL;
 		goto out;
 	}
 
-	/*
-	 * On backplane, bail out if
-	 * - backplane autoneg was not completed, or if
-	 * - we are 82599 and link partner is not AN enabled
-	 */
-	if (hw->phy.media_type == ixgbe_media_type_backplane) {
-		links = IXGBE_READ_REG(hw, IXGBE_LINKS);
-		if ((links & IXGBE_LINKS_KX_AN_COMP) == 0) {
-			hw->fc.fc_was_autonegged = false;
-			hw->fc.current_mode = hw->fc.requested_mode;
-			goto out;
-		}
+	switch (hw->phy.media_type) {
+	/* Autoneg flow control on fiber adapters */
+	case ixgbe_media_type_fiber:
+		if (speed == IXGBE_LINK_SPEED_1GB_FULL)
+			ret_val = ixgbe_fc_autoneg_fiber(hw);
+		break;
 
-		if (hw->mac.type == ixgbe_mac_82599EB) {
-			links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2);
-			if ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0) {
-				hw->fc.fc_was_autonegged = false;
-				hw->fc.current_mode = hw->fc.requested_mode;
-				goto out;
-			}
-		}
+	/* Autoneg flow control on backplane adapters */
+	case ixgbe_media_type_backplane:
+		ret_val = ixgbe_fc_autoneg_backplane(hw);
+		break;
+
+	/* Autoneg flow control on copper adapters */
+	case ixgbe_media_type_copper:
+		if (ixgbe_device_supports_autoneg_fc(hw) == 0)
+			ret_val = ixgbe_fc_autoneg_copper(hw);
+		break;
+
+	default:
+		break;
+	}
+
+out:
+	if (ret_val == 0) {
+		hw->fc.fc_was_autonegged = true;
+	} else {
+		hw->fc.fc_was_autonegged = false;
+		hw->fc.current_mode = hw->fc.requested_mode;
 	}
+	return ret_val;
+}
+
+/**
+ *  ixgbe_fc_autoneg_fiber - Enable flow control on 1 gig fiber
+ *  @hw: pointer to hardware structure
+ *
+ *  Enable flow control according on 1 gig fiber.
+ **/
+static s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw)
+{
+	u32 pcs_anadv_reg, pcs_lpab_reg, linkstat;
+	s32 ret_val;
 
 	/*
 	 * On multispeed fiber at 1g, bail out if
 	 * - link is up but AN did not complete, or if
 	 * - link is up and AN completed but timed out
 	 */
-	if (hw->phy.multispeed_fiber && (speed == IXGBE_LINK_SPEED_1GB_FULL)) {
-		linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
-		if (((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
-		    ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) {
-			hw->fc.fc_was_autonegged = false;
-			hw->fc.current_mode = hw->fc.requested_mode;
-			goto out;
-		}
+
+	linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
+	if (((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
+	    ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) {
+		ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
+		goto out;
 	}
 
+	pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
+	pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP);
+
+	ret_val =  ixgbe_negotiate_fc(hw, pcs_anadv_reg,
+			       pcs_lpab_reg, IXGBE_PCS1GANA_SYM_PAUSE,
+			       IXGBE_PCS1GANA_ASM_PAUSE,
+			       IXGBE_PCS1GANA_SYM_PAUSE,
+			       IXGBE_PCS1GANA_ASM_PAUSE);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_fc_autoneg_backplane - Enable flow control IEEE clause 37
+ *  @hw: pointer to hardware structure
+ *
+ *  Enable flow control according to IEEE clause 37.
+ **/
+static s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw)
+{
+	u32 links2, anlp1_reg, autoc_reg, links;
+	s32 ret_val;
+
 	/*
-	 * Bail out on
-	 * - copper or CX4 adapters
-	 * - fiber adapters running at 10gig
+	 * On backplane, bail out if
+	 * - backplane autoneg was not completed, or if
+	 * - we are 82599 and link partner is not AN enabled
 	 */
-	if ((hw->phy.media_type == ixgbe_media_type_copper) ||
-	     (hw->phy.media_type == ixgbe_media_type_cx4) ||
-	     ((hw->phy.media_type == ixgbe_media_type_fiber) &&
-	     (speed == IXGBE_LINK_SPEED_10GB_FULL))) {
+	links = IXGBE_READ_REG(hw, IXGBE_LINKS);
+	if ((links & IXGBE_LINKS_KX_AN_COMP) == 0) {
 		hw->fc.fc_was_autonegged = false;
 		hw->fc.current_mode = hw->fc.requested_mode;
+		ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
 		goto out;
 	}
 
+	if (hw->mac.type == ixgbe_mac_82599EB) {
+		links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2);
+		if ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0) {
+			hw->fc.fc_was_autonegged = false;
+			hw->fc.current_mode = hw->fc.requested_mode;
+			ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
+			goto out;
+		}
+	}
 	/*
-	 * Read the AN advertisement and LP ability registers and resolve
+	 * Read the 10g AN autoc and LP ability registers and resolve
 	 * local flow control settings accordingly
 	 */
-	if ((speed == IXGBE_LINK_SPEED_1GB_FULL) &&
-	    (hw->phy.media_type != ixgbe_media_type_backplane)) {
-		pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
-		pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP);
-		if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
-		    (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE)) {
-			/*
-			 * Now we need to check if the user selected Rx ONLY
-			 * of pause frames.  In this case, we had to advertise
-			 * FULL flow control because we could not advertise RX
-			 * ONLY. Hence, we must now check to see if we need to
-			 * turn OFF the TRANSMISSION of PAUSE frames.
-			 */
-			if (hw->fc.requested_mode == ixgbe_fc_full) {
-				hw->fc.current_mode = ixgbe_fc_full;
-				hw_dbg(hw, "Flow Control = FULL.\n");
-			} else {
-				hw->fc.current_mode = ixgbe_fc_rx_pause;
-				hw_dbg(hw, "Flow Control=RX PAUSE only\n");
-			}
-		} else if (!(pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
-			   (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
-			   (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
-			   (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
-			hw->fc.current_mode = ixgbe_fc_tx_pause;
-			hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n");
-		} else if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
-			   (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
-			   !(pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
-			   (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
-			hw->fc.current_mode = ixgbe_fc_rx_pause;
-			hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n");
-		} else {
-			hw->fc.current_mode = ixgbe_fc_none;
-			hw_dbg(hw, "Flow Control = NONE.\n");
-		}
-	}
+	autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1);
 
-	if (hw->phy.media_type == ixgbe_media_type_backplane) {
+	ret_val = ixgbe_negotiate_fc(hw, autoc_reg,
+		anlp1_reg, IXGBE_AUTOC_SYM_PAUSE, IXGBE_AUTOC_ASM_PAUSE,
+		IXGBE_ANLP1_SYM_PAUSE, IXGBE_ANLP1_ASM_PAUSE);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_fc_autoneg_copper - Enable flow control IEEE clause 37
+ *  @hw: pointer to hardware structure
+ *
+ *  Enable flow control according to IEEE clause 37.
+ **/
+static s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw)
+{
+	u16 technology_ability_reg = 0;
+	u16 lp_technology_ability_reg = 0;
+
+	hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE,
+			     MDIO_MMD_AN,
+			     &technology_ability_reg);
+	hw->phy.ops.read_reg(hw, MDIO_AN_LPA,
+			     MDIO_MMD_AN,
+			     &lp_technology_ability_reg);
+
+	return ixgbe_negotiate_fc(hw, (u32)technology_ability_reg,
+				  (u32)lp_technology_ability_reg,
+				  IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE,
+				  IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE);
+}
+
+/**
+ *  ixgbe_negotiate_fc - Negotiate flow control
+ *  @hw: pointer to hardware structure
+ *  @adv_reg: flow control advertised settings
+ *  @lp_reg: link partner's flow control settings
+ *  @adv_sym: symmetric pause bit in advertisement
+ *  @adv_asm: asymmetric pause bit in advertisement
+ *  @lp_sym: symmetric pause bit in link partner advertisement
+ *  @lp_asm: asymmetric pause bit in link partner advertisement
+ *
+ *  Find the intersection between advertised settings and link partner's
+ *  advertised settings
+ **/
+static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
+			      u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
+{
+	if ((!(adv_reg)) ||  (!(lp_reg)))
+		return IXGBE_ERR_FC_NOT_NEGOTIATED;
+
+	if ((adv_reg & adv_sym) && (lp_reg & lp_sym)) {
 		/*
-		 * Read the 10g AN autoc and LP ability registers and resolve
-		 * local flow control settings accordingly
+		 * Now we need to check if the user selected Rx ONLY
+		 * of pause frames.  In this case, we had to advertise
+		 * FULL flow control because we could not advertise RX
+		 * ONLY. Hence, we must now check to see if we need to
+		 * turn OFF the TRANSMISSION of PAUSE frames.
 		 */
-		autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
-		anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1);
-
-		if ((autoc_reg & IXGBE_AUTOC_SYM_PAUSE) &&
-		    (anlp1_reg & IXGBE_ANLP1_SYM_PAUSE)) {
-			/*
-			 * Now we need to check if the user selected Rx ONLY
-			 * of pause frames.  In this case, we had to advertise
-			 * FULL flow control because we could not advertise RX
-			 * ONLY. Hence, we must now check to see if we need to
-			 * turn OFF the TRANSMISSION of PAUSE frames.
-			 */
-			if (hw->fc.requested_mode == ixgbe_fc_full) {
-				hw->fc.current_mode = ixgbe_fc_full;
-				hw_dbg(hw, "Flow Control = FULL.\n");
-			} else {
-				hw->fc.current_mode = ixgbe_fc_rx_pause;
-				hw_dbg(hw, "Flow Control=RX PAUSE only\n");
-			}
-		} else if (!(autoc_reg & IXGBE_AUTOC_SYM_PAUSE) &&
-			   (autoc_reg & IXGBE_AUTOC_ASM_PAUSE) &&
-			   (anlp1_reg & IXGBE_ANLP1_SYM_PAUSE) &&
-			   (anlp1_reg & IXGBE_ANLP1_ASM_PAUSE)) {
-			hw->fc.current_mode = ixgbe_fc_tx_pause;
-			hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n");
-		} else if ((autoc_reg & IXGBE_AUTOC_SYM_PAUSE) &&
-			   (autoc_reg & IXGBE_AUTOC_ASM_PAUSE) &&
-			   !(anlp1_reg & IXGBE_ANLP1_SYM_PAUSE) &&
-			   (anlp1_reg & IXGBE_ANLP1_ASM_PAUSE)) {
-			hw->fc.current_mode = ixgbe_fc_rx_pause;
-			hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n");
+		if (hw->fc.requested_mode == ixgbe_fc_full) {
+			hw->fc.current_mode = ixgbe_fc_full;
+			hw_dbg(hw, "Flow Control = FULL.\n");
 		} else {
-			hw->fc.current_mode = ixgbe_fc_none;
-			hw_dbg(hw, "Flow Control = NONE.\n");
+			hw->fc.current_mode = ixgbe_fc_rx_pause;
+			hw_dbg(hw, "Flow Control=RX PAUSE frames only\n");
 		}
+	} else if (!(adv_reg & adv_sym) && (adv_reg & adv_asm) &&
+		   (lp_reg & lp_sym) && (lp_reg & lp_asm)) {
+		hw->fc.current_mode = ixgbe_fc_tx_pause;
+		hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n");
+	} else if ((adv_reg & adv_sym) && (adv_reg & adv_asm) &&
+		   !(lp_reg & lp_sym) && (lp_reg & lp_asm)) {
+		hw->fc.current_mode = ixgbe_fc_rx_pause;
+		hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n");
+	} else {
+		hw->fc.current_mode = ixgbe_fc_none;
+		hw_dbg(hw, "Flow Control = NONE.\n");
 	}
-	/* Record that current_mode is the result of a successful autoneg */
-	hw->fc.fc_was_autonegged = true;
-
-out:
-	return ret_val;
+	return 0;
 }
 
 /**
@@ -1848,7 +1901,8 @@ out:
 static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
 {
 	s32 ret_val = 0;
-	u32 reg;
+	u32 reg = 0, reg_bp = 0;
+	u16 reg_cu = 0;
 
 #ifdef CONFIG_DCB
 	if (hw->fc.requested_mode == ixgbe_fc_pfc) {
@@ -1856,7 +1910,7 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
 		goto out;
 	}
 
-#endif
+#endif /* CONFIG_DCB */
 	/* Validate the packetbuf configuration */
 	if (packetbuf_num < 0 || packetbuf_num > 7) {
 		hw_dbg(hw, "Invalid packet buffer number [%d], expected range "
@@ -1894,11 +1948,26 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
 		hw->fc.requested_mode = ixgbe_fc_full;
 
 	/*
-	 * Set up the 1G flow control advertisement registers so the HW will be
-	 * able to do fc autoneg once the cable is plugged in.  If we end up
-	 * using 10g instead, this is harmless.
+	 * Set up the 1G and 10G flow control advertisement registers so the
+	 * HW will be able to do fc autoneg once the cable is plugged in.  If
+	 * we link at 10G, the 1G advertisement is harmless and vice versa.
 	 */
-	reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
+
+	switch (hw->phy.media_type) {
+	case ixgbe_media_type_fiber:
+	case ixgbe_media_type_backplane:
+		reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
+		reg_bp = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+		break;
+
+	case ixgbe_media_type_copper:
+		hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE,
+					MDIO_MMD_AN, &reg_cu);
+		break;
+
+	default:
+		;
+	}
 
 	/*
 	 * The possible values of fc.requested_mode are:
@@ -1917,6 +1986,11 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
 	case ixgbe_fc_none:
 		/* Flow control completely disabled by software override. */
 		reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
+		if (hw->phy.media_type == ixgbe_media_type_backplane)
+			reg_bp &= ~(IXGBE_AUTOC_SYM_PAUSE |
+				    IXGBE_AUTOC_ASM_PAUSE);
+		else if (hw->phy.media_type == ixgbe_media_type_copper)
+			reg_cu &= ~(IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE);
 		break;
 	case ixgbe_fc_rx_pause:
 		/*
@@ -1928,6 +2002,11 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
 		 * disable the adapter's ability to send PAUSE frames.
 		 */
 		reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
+		if (hw->phy.media_type == ixgbe_media_type_backplane)
+			reg_bp |= (IXGBE_AUTOC_SYM_PAUSE |
+				   IXGBE_AUTOC_ASM_PAUSE);
+		else if (hw->phy.media_type == ixgbe_media_type_copper)
+			reg_cu |= (IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE);
 		break;
 	case ixgbe_fc_tx_pause:
 		/*
@@ -1936,10 +2015,22 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
 		 */
 		reg |= (IXGBE_PCS1GANA_ASM_PAUSE);
 		reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE);
+		if (hw->phy.media_type == ixgbe_media_type_backplane) {
+			reg_bp |= (IXGBE_AUTOC_ASM_PAUSE);
+			reg_bp &= ~(IXGBE_AUTOC_SYM_PAUSE);
+		} else if (hw->phy.media_type == ixgbe_media_type_copper) {
+			reg_cu |= (IXGBE_TAF_ASM_PAUSE);
+			reg_cu &= ~(IXGBE_TAF_SYM_PAUSE);
+		}
 		break;
 	case ixgbe_fc_full:
 		/* Flow control (both Rx and Tx) is enabled by SW override. */
 		reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
+		if (hw->phy.media_type == ixgbe_media_type_backplane)
+			reg_bp |= (IXGBE_AUTOC_SYM_PAUSE |
+				   IXGBE_AUTOC_ASM_PAUSE);
+		else if (hw->phy.media_type == ixgbe_media_type_copper)
+			reg_cu |= (IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE);
 		break;
 #ifdef CONFIG_DCB
 	case ixgbe_fc_pfc:
@@ -1953,80 +2044,37 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
 		break;
 	}
 
-	IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg);
-	reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL);
-
-	/* Disable AN timeout */
-	if (hw->fc.strict_ieee)
-		reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN;
+	if (hw->mac.type != ixgbe_mac_X540) {
+		/*
+		 * Enable auto-negotiation between the MAC & PHY;
+		 * the MAC will advertise clause 37 flow control.
+		 */
+		IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg);
+		reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL);
 
-	IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg);
-	hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg);
+		/* Disable AN timeout */
+		if (hw->fc.strict_ieee)
+			reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN;
 
-	/*
-	 * Set up the 10G flow control advertisement registers so the HW
-	 * can do fc autoneg once the cable is plugged in.  If we end up
-	 * using 1g instead, this is harmless.
-	 */
-	reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+		IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg);
+		hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg);
+	}
 
 	/*
-	 * The possible values of fc.requested_mode are:
-	 * 0: Flow control is completely disabled
-	 * 1: Rx flow control is enabled (we can receive pause frames,
-	 *    but not send pause frames).
-	 * 2: Tx flow control is enabled (we can send pause frames but
-	 *    we do not support receiving pause frames).
-	 * 3: Both Rx and Tx flow control (symmetric) are enabled.
-	 * other: Invalid.
+	 * AUTOC restart handles negotiation of 1G and 10G on backplane
+	 * and copper. There is no need to set the PCS1GCTL register.
+	 *
 	 */
-	switch (hw->fc.requested_mode) {
-	case ixgbe_fc_none:
-		/* Flow control completely disabled by software override. */
-		reg &= ~(IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE);
-		break;
-	case ixgbe_fc_rx_pause:
-		/*
-		 * Rx Flow control is enabled and Tx Flow control is
-		 * disabled by software override. Since there really
-		 * isn't a way to advertise that we are capable of RX
-		 * Pause ONLY, we will advertise that we support both
-		 * symmetric and asymmetric Rx PAUSE.  Later, we will
-		 * disable the adapter's ability to send PAUSE frames.
-		 */
-		reg |= (IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE);
-		break;
-	case ixgbe_fc_tx_pause:
-		/*
-		 * Tx Flow control is enabled, and Rx Flow control is
-		 * disabled by software override.
-		 */
-		reg |= (IXGBE_AUTOC_ASM_PAUSE);
-		reg &= ~(IXGBE_AUTOC_SYM_PAUSE);
-		break;
-	case ixgbe_fc_full:
-		/* Flow control (both Rx and Tx) is enabled by SW override. */
-		reg |= (IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE);
-		break;
-#ifdef CONFIG_DCB
-	case ixgbe_fc_pfc:
-		goto out;
-		break;
-#endif /* CONFIG_DCB */
-	default:
-		hw_dbg(hw, "Flow control param set incorrectly\n");
-		ret_val = IXGBE_ERR_CONFIG;
-		goto out;
-		break;
+	if (hw->phy.media_type == ixgbe_media_type_backplane) {
+		reg_bp |= IXGBE_AUTOC_AN_RESTART;
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_bp);
+	} else if ((hw->phy.media_type == ixgbe_media_type_copper) &&
+		    (ixgbe_device_supports_autoneg_fc(hw) == 0)) {
+		hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE,
+				      MDIO_MMD_AN, reg_cu);
 	}
-	/*
-	 * AUTOC restart handles negotiation of 1G and 10G. There is
-	 * no need to set the PCS1GCTL register.
-	 */
-	reg |= IXGBE_AUTOC_AN_RESTART;
-	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg);
-	hw_dbg(hw, "Set up FC; IXGBE_AUTOC = 0x%08X\n", reg);
 
+	hw_dbg(hw, "Set up FC; IXGBE_AUTOC = 0x%08X\n", reg);
 out:
 	return ret_val;
 }
@@ -2750,6 +2798,28 @@ wwn_prefix_out:
 	return 0;
 }
 
+/**
+ *  ixgbe_device_supports_autoneg_fc - Check if phy supports autoneg flow
+ *  control
+ *  @hw: pointer to hardware structure
+ *
+ *  There are several phys that do not support autoneg flow control. This
+ *  function check the device id to see if the associated phy supports
+ *  autoneg flow control.
+ **/
+static s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
+{
+
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_X540T:
+		return 0;
+	case IXGBE_DEV_ID_82599_T3_LOM:
+		return 0;
+	default:
+		return IXGBE_ERR_FC_NOT_SUPPORTED;
+	}
+}
+
 /**
  *  ixgbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing
  *  @hw: pointer to hardware structure
-- 
cgit v1.2.3


From da74cd4a2f64b01c14c4bf7df355a982f1e2ab18 Mon Sep 17 00:00:00 2001
From: Emil Tantilov <emil.s.tantilov@intel.com>
Date: Thu, 3 Mar 2011 09:25:07 +0000
Subject: ixgbe: fix spelling errors

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_common.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net/ixgbe/ixgbe_common.c')

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 7a6a3fbee19f..bcd952916eb2 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -2162,7 +2162,7 @@ out:
  *  @hw: pointer to hardware structure
  *  @mask: Mask to specify which semaphore to acquire
  *
- *  Acquires the SWFW semaphore thought the GSSR register for the specified
+ *  Acquires the SWFW semaphore through the GSSR register for the specified
  *  function (CSR, PHY0, PHY1, EEPROM, Flash)
  **/
 s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
@@ -2210,7 +2210,7 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
  *  @hw: pointer to hardware structure
  *  @mask: Mask to specify which semaphore to release
  *
- *  Releases the SWFW semaphore thought the GSSR register for the specified
+ *  Releases the SWFW semaphore through the GSSR register for the specified
  *  function (CSR, PHY0, PHY1, EEPROM, Flash)
  **/
 void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask)
-- 
cgit v1.2.3