From 495dce123ceabbae035552437fcaa0f69247ff08 Mon Sep 17 00:00:00 2001 From: "Waskiewicz Jr, Peter P" Date: Thu, 23 Apr 2009 11:15:18 +0000 Subject: ixgbe: Fix WoL functionality for 82599 KX4 devices The current code writes the PME enabled bit in PCI config space which is wrong. This was needed for pre-release hardware, and was not removed from the driver. Also, we need to clear the WUS (wake up status) after we resume. Otherwise we can't wake for the same event again since it's still asserted in the hardware. Plus, the multicast lists were being written improperly, causing multicast WoL to fail. Signed-off-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers/net/ixgbe/ixgbe_main.c') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 01884256f4c9..07e778d3e5d2 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -3646,6 +3646,8 @@ static int ixgbe_resume(struct pci_dev *pdev) ixgbe_reset(adapter); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0); + if (netif_running(netdev)) { err = ixgbe_open(adapter->netdev); if (err) @@ -4575,7 +4577,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data]; static int cards_found; int i, err, pci_using_dac; - u16 pm_value = 0; u32 part_num, eec; err = pci_enable_device(pdev); @@ -4763,11 +4764,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, switch (pdev->device) { case IXGBE_DEV_ID_82599_KX4: -#define IXGBE_PCIE_PMCSR 0x44 - adapter->wol = IXGBE_WUFC_MAG; - pci_read_config_word(pdev, IXGBE_PCIE_PMCSR, &pm_value); - pci_write_config_word(pdev, IXGBE_PCIE_PMCSR, - (pm_value | (1 << 8))); + adapter->wol = (IXGBE_WUFC_MAG | IXGBE_WUFC_EX | + IXGBE_WUFC_MC | IXGBE_WUFC_BC); break; default: adapter->wol = 0; -- cgit v1.2.3