From 93f7848b77bcf1108879defd32612422ae80d785 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Fri, 13 May 2011 02:24:46 -0700 Subject: myri*: Move the Myricom drivers Move the Myricom drivers into drivers/net/ethernet/myricom/ and make the necessary Kconfig and Makefile changes. CC: Andrew Gallatin CC: Brice Goglin Signed-off-by: Jeff Kirsher --- drivers/net/myri10ge/myri10ge_mcp.h | 435 ------------------------------------ 1 file changed, 435 deletions(-) delete mode 100644 drivers/net/myri10ge/myri10ge_mcp.h (limited to 'drivers/net/myri10ge/myri10ge_mcp.h') diff --git a/drivers/net/myri10ge/myri10ge_mcp.h b/drivers/net/myri10ge/myri10ge_mcp.h deleted file mode 100644 index 11be150e4d67..000000000000 --- a/drivers/net/myri10ge/myri10ge_mcp.h +++ /dev/null @@ -1,435 +0,0 @@ -#ifndef __MYRI10GE_MCP_H__ -#define __MYRI10GE_MCP_H__ - -#define MXGEFW_VERSION_MAJOR 1 -#define MXGEFW_VERSION_MINOR 4 - -/* 8 Bytes */ -struct mcp_dma_addr { - __be32 high; - __be32 low; -}; - -/* 4 Bytes */ -struct mcp_slot { - __sum16 checksum; - __be16 length; -}; - -/* 64 Bytes */ -struct mcp_cmd { - __be32 cmd; - __be32 data0; /* will be low portion if data > 32 bits */ - /* 8 */ - __be32 data1; /* will be high portion if data > 32 bits */ - __be32 data2; /* currently unused.. */ - /* 16 */ - struct mcp_dma_addr response_addr; - /* 24 */ - u8 pad[40]; -}; - -/* 8 Bytes */ -struct mcp_cmd_response { - __be32 data; - __be32 result; -}; - -/* - * flags used in mcp_kreq_ether_send_t: - * - * The SMALL flag is only needed in the first segment. It is raised - * for packets that are total less or equal 512 bytes. - * - * The CKSUM flag must be set in all segments. - * - * The PADDED flags is set if the packet needs to be padded, and it - * must be set for all segments. - * - * The MXGEFW_FLAGS_ALIGN_ODD must be set if the cumulative - * length of all previous segments was odd. - */ - -#define MXGEFW_FLAGS_SMALL 0x1 -#define MXGEFW_FLAGS_TSO_HDR 0x1 -#define MXGEFW_FLAGS_FIRST 0x2 -#define MXGEFW_FLAGS_ALIGN_ODD 0x4 -#define MXGEFW_FLAGS_CKSUM 0x8 -#define MXGEFW_FLAGS_TSO_LAST 0x8 -#define MXGEFW_FLAGS_NO_TSO 0x10 -#define MXGEFW_FLAGS_TSO_CHOP 0x10 -#define MXGEFW_FLAGS_TSO_PLD 0x20 - -#define MXGEFW_SEND_SMALL_SIZE 1520 -#define MXGEFW_MAX_MTU 9400 - -union mcp_pso_or_cumlen { - u16 pseudo_hdr_offset; - u16 cum_len; -}; - -#define MXGEFW_MAX_SEND_DESC 12 -#define MXGEFW_PAD 2 - -/* 16 Bytes */ -struct mcp_kreq_ether_send { - __be32 addr_high; - __be32 addr_low; - __be16 pseudo_hdr_offset; - __be16 length; - u8 pad; - u8 rdma_count; - u8 cksum_offset; /* where to start computing cksum */ - u8 flags; /* as defined above */ -}; - -/* 8 Bytes */ -struct mcp_kreq_ether_recv { - __be32 addr_high; - __be32 addr_low; -}; - -/* Commands */ - -#define MXGEFW_BOOT_HANDOFF 0xfc0000 -#define MXGEFW_BOOT_DUMMY_RDMA 0xfc01c0 - -#define MXGEFW_ETH_CMD 0xf80000 -#define MXGEFW_ETH_SEND_4 0x200000 -#define MXGEFW_ETH_SEND_1 0x240000 -#define MXGEFW_ETH_SEND_2 0x280000 -#define MXGEFW_ETH_SEND_3 0x2c0000 -#define MXGEFW_ETH_RECV_SMALL 0x300000 -#define MXGEFW_ETH_RECV_BIG 0x340000 -#define MXGEFW_ETH_SEND_GO 0x380000 -#define MXGEFW_ETH_SEND_STOP 0x3C0000 - -#define MXGEFW_ETH_SEND(n) (0x200000 + (((n) & 0x03) * 0x40000)) -#define MXGEFW_ETH_SEND_OFFSET(n) (MXGEFW_ETH_SEND(n) - MXGEFW_ETH_SEND_4) - -enum myri10ge_mcp_cmd_type { - MXGEFW_CMD_NONE = 0, - /* Reset the mcp, it is left in a safe state, waiting - * for the driver to set all its parameters */ - MXGEFW_CMD_RESET = 1, - - /* get the version number of the current firmware.. - * (may be available in the eeprom strings..? */ - MXGEFW_GET_MCP_VERSION = 2, - - /* Parameters which must be set by the driver before it can - * issue MXGEFW_CMD_ETHERNET_UP. They persist until the next - * MXGEFW_CMD_RESET is issued */ - - MXGEFW_CMD_SET_INTRQ_DMA = 3, - /* data0 = LSW of the host address - * data1 = MSW of the host address - * data2 = slice number if multiple slices are used - */ - - MXGEFW_CMD_SET_BIG_BUFFER_SIZE = 4, /* in bytes, power of 2 */ - MXGEFW_CMD_SET_SMALL_BUFFER_SIZE = 5, /* in bytes */ - - /* Parameters which refer to lanai SRAM addresses where the - * driver must issue PIO writes for various things */ - - MXGEFW_CMD_GET_SEND_OFFSET = 6, - MXGEFW_CMD_GET_SMALL_RX_OFFSET = 7, - MXGEFW_CMD_GET_BIG_RX_OFFSET = 8, - /* data0 = slice number if multiple slices are used */ - - MXGEFW_CMD_GET_IRQ_ACK_OFFSET = 9, - MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET = 10, - - /* Parameters which refer to rings stored on the MCP, - * and whose size is controlled by the mcp */ - - MXGEFW_CMD_GET_SEND_RING_SIZE = 11, /* in bytes */ - MXGEFW_CMD_GET_RX_RING_SIZE = 12, /* in bytes */ - - /* Parameters which refer to rings stored in the host, - * and whose size is controlled by the host. Note that - * all must be physically contiguous and must contain - * a power of 2 number of entries. */ - - MXGEFW_CMD_SET_INTRQ_SIZE = 13, /* in bytes */ -#define MXGEFW_CMD_SET_INTRQ_SIZE_FLAG_NO_STRICT_SIZE_CHECK (1 << 31) - - /* command to bring ethernet interface up. Above parameters - * (plus mtu & mac address) must have been exchanged prior - * to issuing this command */ - MXGEFW_CMD_ETHERNET_UP = 14, - - /* command to bring ethernet interface down. No further sends - * or receives may be processed until an MXGEFW_CMD_ETHERNET_UP - * is issued, and all interrupt queues must be flushed prior - * to ack'ing this command */ - - MXGEFW_CMD_ETHERNET_DOWN = 15, - - /* commands the driver may issue live, without resetting - * the nic. Note that increasing the mtu "live" should - * only be done if the driver has already supplied buffers - * sufficiently large to handle the new mtu. Decreasing - * the mtu live is safe */ - - MXGEFW_CMD_SET_MTU = 16, - MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET = 17, /* in microseconds */ - MXGEFW_CMD_SET_STATS_INTERVAL = 18, /* in microseconds */ - MXGEFW_CMD_SET_STATS_DMA_OBSOLETE = 19, /* replaced by SET_STATS_DMA_V2 */ - - MXGEFW_ENABLE_PROMISC = 20, - MXGEFW_DISABLE_PROMISC = 21, - MXGEFW_SET_MAC_ADDRESS = 22, - - MXGEFW_ENABLE_FLOW_CONTROL = 23, - MXGEFW_DISABLE_FLOW_CONTROL = 24, - - /* do a DMA test - * data0,data1 = DMA address - * data2 = RDMA length (MSH), WDMA length (LSH) - * command return data = repetitions (MSH), 0.5-ms ticks (LSH) - */ - MXGEFW_DMA_TEST = 25, - - MXGEFW_ENABLE_ALLMULTI = 26, - MXGEFW_DISABLE_ALLMULTI = 27, - - /* returns MXGEFW_CMD_ERROR_MULTICAST - * if there is no room in the cache - * data0,MSH(data1) = multicast group address */ - MXGEFW_JOIN_MULTICAST_GROUP = 28, - /* returns MXGEFW_CMD_ERROR_MULTICAST - * if the address is not in the cache, - * or is equal to FF-FF-FF-FF-FF-FF - * data0,MSH(data1) = multicast group address */ - MXGEFW_LEAVE_MULTICAST_GROUP = 29, - MXGEFW_LEAVE_ALL_MULTICAST_GROUPS = 30, - - MXGEFW_CMD_SET_STATS_DMA_V2 = 31, - /* data0, data1 = bus addr, - * data2 = sizeof(struct mcp_irq_data) from driver point of view, allows - * adding new stuff to mcp_irq_data without changing the ABI - * - * If multiple slices are used, data2 contains both the size of the - * structure (in the lower 16 bits) and the slice number - * (in the upper 16 bits). - */ - - MXGEFW_CMD_UNALIGNED_TEST = 32, - /* same than DMA_TEST (same args) but abort with UNALIGNED on unaligned - * chipset */ - - MXGEFW_CMD_UNALIGNED_STATUS = 33, - /* return data = boolean, true if the chipset is known to be unaligned */ - - MXGEFW_CMD_ALWAYS_USE_N_BIG_BUFFERS = 34, - /* data0 = number of big buffers to use. It must be 0 or a power of 2. - * 0 indicates that the NIC consumes as many buffers as they are required - * for packet. This is the default behavior. - * A power of 2 number indicates that the NIC always uses the specified - * number of buffers for each big receive packet. - * It is up to the driver to ensure that this value is big enough for - * the NIC to be able to receive maximum-sized packets. - */ - - MXGEFW_CMD_GET_MAX_RSS_QUEUES = 35, - MXGEFW_CMD_ENABLE_RSS_QUEUES = 36, - /* data0 = number of slices n (0, 1, ..., n-1) to enable - * data1 = interrupt mode | use of multiple transmit queues. - * 0=share one INTx/MSI. - * 1=use one MSI-X per queue. - * If all queues share one interrupt, the driver must have set - * RSS_SHARED_INTERRUPT_DMA before enabling queues. - * 2=enable both receive and send queues. - * Without this bit set, only one send queue (slice 0's send queue) - * is enabled. The receive queues are always enabled. - */ -#define MXGEFW_SLICE_INTR_MODE_SHARED 0x0 -#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE 0x1 -#define MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES 0x2 - - MXGEFW_CMD_GET_RSS_SHARED_INTERRUPT_MASK_OFFSET = 37, - MXGEFW_CMD_SET_RSS_SHARED_INTERRUPT_DMA = 38, - /* data0, data1 = bus address lsw, msw */ - MXGEFW_CMD_GET_RSS_TABLE_OFFSET = 39, - /* get the offset of the indirection table */ - MXGEFW_CMD_SET_RSS_TABLE_SIZE = 40, - /* set the size of the indirection table */ - MXGEFW_CMD_GET_RSS_KEY_OFFSET = 41, - /* get the offset of the secret key */ - MXGEFW_CMD_RSS_KEY_UPDATED = 42, - /* tell nic that the secret key's been updated */ - MXGEFW_CMD_SET_RSS_ENABLE = 43, - /* data0 = enable/disable rss - * 0: disable rss. nic does not distribute receive packets. - * 1: enable rss. nic distributes receive packets among queues. - * data1 = hash type - * 1: IPV4 (required by RSS) - * 2: TCP_IPV4 (required by RSS) - * 3: IPV4 | TCP_IPV4 (required by RSS) - * 4: source port - * 5: source port + destination port - */ -#define MXGEFW_RSS_HASH_TYPE_IPV4 0x1 -#define MXGEFW_RSS_HASH_TYPE_TCP_IPV4 0x2 -#define MXGEFW_RSS_HASH_TYPE_SRC_PORT 0x4 -#define MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT 0x5 -#define MXGEFW_RSS_HASH_TYPE_MAX 0x5 - - MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE = 44, - /* Return data = the max. size of the entire headers of a IPv6 TSO packet. - * If the header size of a IPv6 TSO packet is larger than the specified - * value, then the driver must not use TSO. - * This size restriction only applies to IPv6 TSO. - * For IPv4 TSO, the maximum size of the headers is fixed, and the NIC - * always has enough header buffer to store maximum-sized headers. - */ - - MXGEFW_CMD_SET_TSO_MODE = 45, - /* data0 = TSO mode. - * 0: Linux/FreeBSD style (NIC default) - * 1: NDIS/NetBSD style - */ -#define MXGEFW_TSO_MODE_LINUX 0 -#define MXGEFW_TSO_MODE_NDIS 1 - - MXGEFW_CMD_MDIO_READ = 46, - /* data0 = dev_addr (PMA/PMD or PCS ...), data1 = register/addr */ - MXGEFW_CMD_MDIO_WRITE = 47, - /* data0 = dev_addr, data1 = register/addr, data2 = value */ - - MXGEFW_CMD_I2C_READ = 48, - /* Starts to get a fresh copy of one byte or of the module i2c table, the - * obtained data is cached inside the xaui-xfi chip : - * data0 : 0 => get one byte, 1=> get 256 bytes - * data1 : If data0 == 0: location to refresh - * bit 7:0 register location - * bit 8:15 is the i2c slave addr (0 is interpreted as 0xA1) - * bit 23:16 is the i2c bus number (for multi-port NICs) - * If data0 == 1: unused - * The operation might take ~1ms for a single byte or ~65ms when refreshing all 256 bytes - * During the i2c operation, MXGEFW_CMD_I2C_READ or MXGEFW_CMD_I2C_BYTE attempts - * will return MXGEFW_CMD_ERROR_BUSY - */ - MXGEFW_CMD_I2C_BYTE = 49, - /* Return the last obtained copy of a given byte in the xfp i2c table - * (copy cached during the last relevant MXGEFW_CMD_I2C_READ) - * data0 : index of the desired table entry - * Return data = the byte stored at the requested index in the table - */ - - MXGEFW_CMD_GET_VPUMP_OFFSET = 50, - /* Return data = NIC memory offset of mcp_vpump_public_global */ - MXGEFW_CMD_RESET_VPUMP = 51, - /* Resets the VPUMP state */ - - MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE = 52, - /* data0 = mcp_slot type to use. - * 0 = the default 4B mcp_slot - * 1 = 8B mcp_slot_8 - */ -#define MXGEFW_RSS_MCP_SLOT_TYPE_MIN 0 -#define MXGEFW_RSS_MCP_SLOT_TYPE_WITH_HASH 1 - - MXGEFW_CMD_SET_THROTTLE_FACTOR = 53, - /* set the throttle factor for ethp_z8e - * data0 = throttle_factor - * throttle_factor = 256 * pcie-raw-speed / tx_speed - * tx_speed = 256 * pcie-raw-speed / throttle_factor - * - * For PCI-E x8: pcie-raw-speed == 16Gb/s - * For PCI-E x4: pcie-raw-speed == 8Gb/s - * - * ex1: throttle_factor == 0x1a0 (416), tx_speed == 1.23GB/s == 9.846 Gb/s - * ex2: throttle_factor == 0x200 (512), tx_speed == 1.0GB/s == 8 Gb/s - * - * with tx_boundary == 2048, max-throttle-factor == 8191 => min-speed == 500Mb/s - * with tx_boundary == 4096, max-throttle-factor == 4095 => min-speed == 1Gb/s - */ - - MXGEFW_CMD_VPUMP_UP = 54, - /* Allocates VPump Connection, Send Request and Zero copy buffer address tables */ - MXGEFW_CMD_GET_VPUMP_CLK = 55, - /* Get the lanai clock */ - - MXGEFW_CMD_GET_DCA_OFFSET = 56, - /* offset of dca control for WDMAs */ - - /* VMWare NetQueue commands */ - MXGEFW_CMD_NETQ_GET_FILTERS_PER_QUEUE = 57, - MXGEFW_CMD_NETQ_ADD_FILTER = 58, - /* data0 = filter_id << 16 | queue << 8 | type */ - /* data1 = MS4 of MAC Addr */ - /* data2 = LS2_MAC << 16 | VLAN_tag */ - MXGEFW_CMD_NETQ_DEL_FILTER = 59, - /* data0 = filter_id */ - MXGEFW_CMD_NETQ_QUERY1 = 60, - MXGEFW_CMD_NETQ_QUERY2 = 61, - MXGEFW_CMD_NETQ_QUERY3 = 62, - MXGEFW_CMD_NETQ_QUERY4 = 63, - - MXGEFW_CMD_RELAX_RXBUFFER_ALIGNMENT = 64, - /* When set, small receive buffers can cross page boundaries. - * Both small and big receive buffers may start at any address. - * This option has performance implications, so use with caution. - */ -}; - -enum myri10ge_mcp_cmd_status { - MXGEFW_CMD_OK = 0, - MXGEFW_CMD_UNKNOWN = 1, - MXGEFW_CMD_ERROR_RANGE = 2, - MXGEFW_CMD_ERROR_BUSY = 3, - MXGEFW_CMD_ERROR_EMPTY = 4, - MXGEFW_CMD_ERROR_CLOSED = 5, - MXGEFW_CMD_ERROR_HASH_ERROR = 6, - MXGEFW_CMD_ERROR_BAD_PORT = 7, - MXGEFW_CMD_ERROR_RESOURCES = 8, - MXGEFW_CMD_ERROR_MULTICAST = 9, - MXGEFW_CMD_ERROR_UNALIGNED = 10, - MXGEFW_CMD_ERROR_NO_MDIO = 11, - MXGEFW_CMD_ERROR_I2C_FAILURE = 12, - MXGEFW_CMD_ERROR_I2C_ABSENT = 13, - MXGEFW_CMD_ERROR_BAD_PCIE_LINK = 14 -}; - -#define MXGEFW_OLD_IRQ_DATA_LEN 40 - -struct mcp_irq_data { - /* add new counters at the beginning */ - __be32 future_use[1]; - __be32 dropped_pause; - __be32 dropped_unicast_filtered; - __be32 dropped_bad_crc32; - __be32 dropped_bad_phy; - __be32 dropped_multicast_filtered; - /* 40 Bytes */ - __be32 send_done_count; - -#define MXGEFW_LINK_DOWN 0 -#define MXGEFW_LINK_UP 1 -#define MXGEFW_LINK_MYRINET 2 -#define MXGEFW_LINK_UNKNOWN 3 - __be32 link_up; - __be32 dropped_link_overflow; - __be32 dropped_link_error_or_filtered; - __be32 dropped_runt; - __be32 dropped_overrun; - __be32 dropped_no_small_buffer; - __be32 dropped_no_big_buffer; - __be32 rdma_tags_available; - - u8 tx_stopped; - u8 link_down; - u8 stats_updated; - u8 valid; -}; - -/* definitions for NETQ filter type */ -#define MXGEFW_NETQ_FILTERTYPE_NONE 0 -#define MXGEFW_NETQ_FILTERTYPE_MACADDR 1 -#define MXGEFW_NETQ_FILTERTYPE_VLAN 2 -#define MXGEFW_NETQ_FILTERTYPE_VLANMACADDR 3 - -#endif /* __MYRI10GE_MCP_H__ */ -- cgit v1.2.3