From 319edafef64406c971035c56bd68480e5a82b581 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 20 Oct 2008 18:15:30 +0100 Subject: smc911x: Add IRQ polarity configuration Platforms like ARM Ltd's RealView require the IRQ polarity bit to be set for the SMC9118 chip. This patch allows the dynamic configuration via the smc911x_platdata structure. This patch also changes the smc91x_platdata structure name to the correct smc911x_platdata in the smc911x_drv_probe() function. Signed-off-by: Catalin Marinas Signed-off-by: Jeff Garzik --- drivers/net/smc911x.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/net/smc911x.c') diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index ec32b5d89c92..2c78229ad04b 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -180,7 +180,7 @@ static void PRINT_PKT(u_char *buf, int length) static void smc911x_reset(struct net_device *dev) { struct smc911x_local *lp = netdev_priv(dev); - unsigned int reg, timeout=0, resets=1; + unsigned int reg, timeout=0, resets=1, irq_cfg; unsigned long flags; DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__); @@ -252,7 +252,12 @@ static void smc911x_reset(struct net_device *dev) * Deassert IRQ for 1*10us for edge type interrupts * and drive IRQ pin push-pull */ - SMC_SET_IRQ_CFG(lp, (1 << 24) | INT_CFG_IRQ_EN_ | INT_CFG_IRQ_TYPE_); + irq_cfg = (1 << 24) | INT_CFG_IRQ_EN_ | INT_CFG_IRQ_TYPE_; +#ifdef SMC_DYNAMIC_BUS_CONFIG + if (lp->cfg.irq_polarity) + irq_cfg |= INT_CFG_IRQ_POL_; +#endif + SMC_SET_IRQ_CFG(lp, irq_cfg); /* clear anything saved */ if (lp->pending_tx_skb != NULL) { @@ -2054,7 +2059,7 @@ err_out: */ static int smc911x_drv_probe(struct platform_device *pdev) { - struct smc91x_platdata *pd = pdev->dev.platform_data; + struct smc911x_platdata *pd = pdev->dev.platform_data; struct net_device *ndev; struct resource *res; struct smc911x_local *lp; -- cgit v1.2.3