From 7bdd305e024d78cfb4f32a1badeb5562791ee5b8 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:50 +0000 Subject: smsc75xx: mark link down on startup and let PHY interrupt deal with carrier changes This patch fixes the same issue as reported on smsc95xx, where the usb device is connected with no ethernet cable plugged-in. Without this patch sysfs reports the cable as present flag@flag-desktop:~$ cat /sys/class/net/eth0/carrier 1 while it's not: flag@flag-desktop:~$ sudo mii-tool eth0 eth0: no link Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/usb/smsc75xx.c') diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index a2349483cd2a..b1b4649802aa 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -1212,7 +1212,7 @@ static const struct driver_info smsc75xx_info = { .rx_fixup = smsc75xx_rx_fixup, .tx_fixup = smsc75xx_tx_fixup, .status = smsc75xx_status, - .flags = FLAG_ETHER | FLAG_SEND_ZLP, + .flags = FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR, }; static const struct usb_device_id products[] = { -- cgit v1.2.3 From cb8722d30c20386e4d4b4bc3a2ceceacd35f818a Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:51 +0000 Subject: smsc75xx: fix mdio reads and writes smsc75xx needs MII_ACCESS_BUSY to be set to correctly trigger mdio I/O. Note smsc75xx is different from smsc95xx in this regard. Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/usb/smsc75xx.c') diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index b1b4649802aa..f97207a709d6 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -171,7 +171,7 @@ static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx) idx &= dev->mii.reg_num_mask; addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR) | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR) - | MII_ACCESS_READ; + | MII_ACCESS_READ | MII_ACCESS_BUSY; ret = smsc75xx_write_reg(dev, MII_ACCESS, addr); check_warn_goto_done(ret, "Error writing MII_ACCESS"); @@ -210,7 +210,7 @@ static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx, idx &= dev->mii.reg_num_mask; addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR) | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR) - | MII_ACCESS_WRITE; + | MII_ACCESS_WRITE | MII_ACCESS_BUSY; ret = smsc75xx_write_reg(dev, MII_ACCESS, addr); check_warn_goto_done(ret, "Error writing MII_ACCESS"); -- cgit v1.2.3 From 4f49add9ad297dab392c14dc60d490364080739b Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:52 +0000 Subject: smsc75xx: add more information to register io failure warnings Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/usb/smsc75xx.c') diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index f97207a709d6..1de778527813 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -98,7 +98,7 @@ static int __must_check smsc75xx_read_reg(struct usbnet *dev, u32 index, if (unlikely(ret < 0)) netdev_warn(dev->net, - "Failed to read register index 0x%08x", index); + "Failed to read reg index 0x%08x: %d", index, ret); le32_to_cpus(buf); *data = *buf; @@ -128,7 +128,7 @@ static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index, if (unlikely(ret < 0)) netdev_warn(dev->net, - "Failed to write register index 0x%08x", index); + "Failed to write reg index 0x%08x: %d", index, ret); kfree(buf); -- cgit v1.2.3 From 8a1d59d79fffdad4bb1b3b5d069da4c6c52db2e6 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:53 +0000 Subject: smsc75xx: fix phy init reset loop fix bug in phy_init loop that was ignoring BMCR reset bit, akin to smsc95xx's d946092000698fd204d82a9d239103c656fb63bf Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/usb/smsc75xx.c') diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 1de778527813..cc23a589e40f 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -661,7 +661,7 @@ static int smsc75xx_phy_initialize(struct usbnet *dev) bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR); check_warn_return(bmcr, "Error reading MII_BMCR"); timeout++; - } while ((bmcr & MII_BMCR) && (timeout < 100)); + } while ((bmcr & BMCR_RESET) && (timeout < 100)); if (timeout >= 100) { netdev_warn(dev->net, "timeout on PHY Reset"); -- cgit v1.2.3 From b140504aa3903feaba6f6bc77a4478a944fc12d2 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:54 +0000 Subject: smsc75xx: fix phy interrupt acknowledge smsc75xx phy interrupt acknowledge needs an mdio_write to clear PHY_INT_SRC instead of just a read like in smsc95xx. Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/net/usb/smsc75xx.c') diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index cc23a589e40f..4941782358ef 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -508,9 +508,10 @@ static int smsc75xx_link_reset(struct usbnet *dev) u16 lcladv, rmtadv; int ret; - /* clear interrupt status */ + /* read and write to clear phy interrupt status */ ret = smsc75xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC); check_warn_return(ret, "Error reading PHY_INT_SRC"); + smsc75xx_mdio_write(dev->net, mii->phy_id, PHY_INT_SRC, 0xffff); ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL); check_warn_return(ret, "Error writing INT_STS"); @@ -643,7 +644,7 @@ static int smsc75xx_set_mac_address(struct usbnet *dev) static int smsc75xx_phy_initialize(struct usbnet *dev) { - int bmcr, timeout = 0; + int bmcr, ret, timeout = 0; /* Initialize MII structure */ dev->mii.dev = dev->net; @@ -672,9 +673,10 @@ static int smsc75xx_phy_initialize(struct usbnet *dev) ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM); - /* read to clear */ - smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC); - check_warn_return(bmcr, "Error reading PHY_INT_SRC"); + /* read and write to clear phy interrupt status */ + ret = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC); + check_warn_return(ret, "Error reading PHY_INT_SRC"); + smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_SRC, 0xffff); smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK, PHY_INT_MASK_DEFAULT); -- cgit v1.2.3 From c0b92e4d44ecaab3cd3f09f9f905306a5989b0d4 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:55 +0000 Subject: smsc75xx: declare smsc75xx's MII as GMII capable also explicitly set the phy to advertise 1000 speeds Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net/usb/smsc75xx.c') diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 4941782358ef..ae23d85a973a 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -652,6 +652,7 @@ static int smsc75xx_phy_initialize(struct usbnet *dev) dev->mii.mdio_write = smsc75xx_mdio_write; dev->mii.phy_id_mask = 0x1f; dev->mii.reg_num_mask = 0x1f; + dev->mii.supports_gmii = 1; dev->mii.phy_id = SMSC75XX_INTERNAL_PHY_ID; /* reset phy and wait for reset to complete */ @@ -672,6 +673,8 @@ static int smsc75xx_phy_initialize(struct usbnet *dev) smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM); + smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000, + ADVERTISE_1000FULL); /* read and write to clear phy interrupt status */ ret = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC); -- cgit v1.2.3 From 2f3a081ea2f63cd5b3e549a0040c760d87483f99 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:56 +0000 Subject: smsc75xx: enable mac to detect speed/duplex from phy This patch sets the automatic speed and duplex detection bits in MAC_CR to enable the mac to determine its speed automatically from the phy. Note this must be done BEFORE the receiver or transmitter is enabled. Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/net/usb/smsc75xx.c') diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index ae23d85a973a..00103a8c5e04 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -951,6 +951,14 @@ static int smsc75xx_reset(struct usbnet *dev) ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf); check_warn_return(ret, "Failed to write INT_EP_CTL: %d", ret); + /* allow mac to detect speed and duplex from phy */ + ret = smsc75xx_read_reg(dev, MAC_CR, &buf); + check_warn_return(ret, "Failed to read MAC_CR: %d", ret); + + buf |= (MAC_CR_ADD | MAC_CR_ASD); + ret = smsc75xx_write_reg(dev, MAC_CR, buf); + check_warn_return(ret, "Failed to write MAC_CR: %d", ret); + ret = smsc75xx_read_reg(dev, MAC_TX, &buf); check_warn_return(ret, "Failed to read MAC_TX: %d", ret); -- cgit v1.2.3