From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/net/wan/sealevel.c | 469 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 469 insertions(+) create mode 100644 drivers/net/wan/sealevel.c (limited to 'drivers/net/wan/sealevel.c') diff --git a/drivers/net/wan/sealevel.c b/drivers/net/wan/sealevel.c new file mode 100644 index 000000000000..5380ddfcd7d5 --- /dev/null +++ b/drivers/net/wan/sealevel.c @@ -0,0 +1,469 @@ +/* + * Sealevel Systems 4021 driver. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * (c) Copyright 1999, 2001 Alan Cox + * (c) Copyright 2001 Red Hat Inc. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include "z85230.h" + + +struct slvl_device +{ + void *if_ptr; /* General purpose pointer (used by SPPP) */ + struct z8530_channel *chan; + struct ppp_device pppdev; + int channel; +}; + + +struct slvl_board +{ + struct slvl_device *dev[2]; + struct z8530_dev board; + int iobase; +}; + +/* + * Network driver support routines + */ + +/* + * Frame receive. Simple for our card as we do sync ppp and there + * is no funny garbage involved + */ + +static void sealevel_input(struct z8530_channel *c, struct sk_buff *skb) +{ + /* Drop the CRC - it's not a good idea to try and negotiate it ;) */ + skb_trim(skb, skb->len-2); + skb->protocol=htons(ETH_P_WAN_PPP); + skb->mac.raw=skb->data; + skb->dev=c->netdevice; + /* + * Send it to the PPP layer. We don't have time to process + * it right now. + */ + netif_rx(skb); + c->netdevice->last_rx = jiffies; +} + +/* + * We've been placed in the UP state + */ + +static int sealevel_open(struct net_device *d) +{ + struct slvl_device *slvl=d->priv; + int err = -1; + int unit = slvl->channel; + + /* + * Link layer up. + */ + + switch(unit) + { + case 0: + err=z8530_sync_dma_open(d, slvl->chan); + break; + case 1: + err=z8530_sync_open(d, slvl->chan); + break; + } + + if(err) + return err; + /* + * Begin PPP + */ + err=sppp_open(d); + if(err) + { + switch(unit) + { + case 0: + z8530_sync_dma_close(d, slvl->chan); + break; + case 1: + z8530_sync_close(d, slvl->chan); + break; + } + return err; + } + + slvl->chan->rx_function=sealevel_input; + + /* + * Go go go + */ + netif_start_queue(d); + return 0; +} + +static int sealevel_close(struct net_device *d) +{ + struct slvl_device *slvl=d->priv; + int unit = slvl->channel; + + /* + * Discard new frames + */ + + slvl->chan->rx_function=z8530_null_rx; + + /* + * PPP off + */ + sppp_close(d); + /* + * Link layer down + */ + + netif_stop_queue(d); + + switch(unit) + { + case 0: + z8530_sync_dma_close(d, slvl->chan); + break; + case 1: + z8530_sync_close(d, slvl->chan); + break; + } + return 0; +} + +static int sealevel_ioctl(struct net_device *d, struct ifreq *ifr, int cmd) +{ + /* struct slvl_device *slvl=d->priv; + z8530_ioctl(d,&slvl->sync.chanA,ifr,cmd) */ + return sppp_do_ioctl(d, ifr,cmd); +} + +static struct net_device_stats *sealevel_get_stats(struct net_device *d) +{ + struct slvl_device *slvl=d->priv; + if(slvl) + return z8530_get_stats(slvl->chan); + else + return NULL; +} + +/* + * Passed PPP frames, fire them downwind. + */ + +static int sealevel_queue_xmit(struct sk_buff *skb, struct net_device *d) +{ + struct slvl_device *slvl=d->priv; + return z8530_queue_xmit(slvl->chan, skb); +} + +static int sealevel_neigh_setup(struct neighbour *n) +{ + if (n->nud_state == NUD_NONE) { + n->ops = &arp_broken_ops; + n->output = n->ops->output; + } + return 0; +} + +static int sealevel_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p) +{ + if (p->tbl->family == AF_INET) { + p->neigh_setup = sealevel_neigh_setup; + p->ucast_probes = 0; + p->mcast_probes = 0; + } + return 0; +} + +static int sealevel_attach(struct net_device *dev) +{ + struct slvl_device *sv = dev->priv; + sppp_attach(&sv->pppdev); + return 0; +} + +static void sealevel_detach(struct net_device *dev) +{ + sppp_detach(dev); +} + +static void slvl_setup(struct net_device *d) +{ + d->open = sealevel_open; + d->stop = sealevel_close; + d->init = sealevel_attach; + d->uninit = sealevel_detach; + d->hard_start_xmit = sealevel_queue_xmit; + d->get_stats = sealevel_get_stats; + d->set_multicast_list = NULL; + d->do_ioctl = sealevel_ioctl; + d->neigh_setup = sealevel_neigh_setup_dev; + d->set_mac_address = NULL; + +} + +static inline struct slvl_device *slvl_alloc(int iobase, int irq) +{ + struct net_device *d; + struct slvl_device *sv; + + d = alloc_netdev(sizeof(struct slvl_device), "hdlc%d", + slvl_setup); + + if (!d) + return NULL; + + sv = d->priv; + sv->if_ptr = &sv->pppdev; + sv->pppdev.dev = d; + d->base_addr = iobase; + d->irq = irq; + + return sv; +} + + +/* + * Allocate and setup Sealevel board. + */ + +static __init struct slvl_board *slvl_init(int iobase, int irq, + int txdma, int rxdma, int slow) +{ + struct z8530_dev *dev; + struct slvl_board *b; + + /* + * Get the needed I/O space + */ + + if(!request_region(iobase, 8, "Sealevel 4021")) + { + printk(KERN_WARNING "sealevel: I/O 0x%X already in use.\n", iobase); + return NULL; + } + + b = kmalloc(sizeof(struct slvl_board), GFP_KERNEL); + if(!b) + goto fail3; + + memset(b, 0, sizeof(*b)); + if (!(b->dev[0]= slvl_alloc(iobase, irq))) + goto fail2; + + b->dev[0]->chan = &b->board.chanA; + b->dev[0]->channel = 0; + + if (!(b->dev[1] = slvl_alloc(iobase, irq))) + goto fail1_0; + + b->dev[1]->chan = &b->board.chanB; + b->dev[1]->channel = 1; + + dev = &b->board; + + /* + * Stuff in the I/O addressing + */ + + dev->active = 0; + + b->iobase = iobase; + + /* + * Select 8530 delays for the old board + */ + + if(slow) + iobase |= Z8530_PORT_SLEEP; + + dev->chanA.ctrlio=iobase+1; + dev->chanA.dataio=iobase; + dev->chanB.ctrlio=iobase+3; + dev->chanB.dataio=iobase+2; + + dev->chanA.irqs=&z8530_nop; + dev->chanB.irqs=&z8530_nop; + + /* + * Assert DTR enable DMA + */ + + outb(3|(1<<7), b->iobase+4); + + + /* We want a fast IRQ for this device. Actually we'd like an even faster + IRQ ;) - This is one driver RtLinux is made for */ + + if(request_irq(irq, &z8530_interrupt, SA_INTERRUPT, "SeaLevel", dev)<0) + { + printk(KERN_WARNING "sealevel: IRQ %d already in use.\n", irq); + goto fail1_1; + } + + dev->irq=irq; + dev->chanA.private=&b->dev[0]; + dev->chanB.private=&b->dev[1]; + dev->chanA.netdevice=b->dev[0]->pppdev.dev; + dev->chanB.netdevice=b->dev[1]->pppdev.dev; + dev->chanA.dev=dev; + dev->chanB.dev=dev; + + dev->chanA.txdma=3; + dev->chanA.rxdma=1; + if(request_dma(dev->chanA.txdma, "SeaLevel (TX)")!=0) + goto fail; + + if(request_dma(dev->chanA.rxdma, "SeaLevel (RX)")!=0) + goto dmafail; + + disable_irq(irq); + + /* + * Begin normal initialise + */ + + if(z8530_init(dev)!=0) + { + printk(KERN_ERR "Z8530 series device not found.\n"); + enable_irq(irq); + goto dmafail2; + } + if(dev->type==Z85C30) + { + z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream); + z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream); + } + else + { + z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream_85230); + z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream_85230); + } + + /* + * Now we can take the IRQ + */ + + enable_irq(irq); + + if (register_netdev(b->dev[0]->pppdev.dev)) + goto dmafail2; + + if (register_netdev(b->dev[1]->pppdev.dev)) + goto fail_unit; + + z8530_describe(dev, "I/O", iobase); + dev->active=1; + return b; + +fail_unit: + unregister_netdev(b->dev[0]->pppdev.dev); + +dmafail2: + free_dma(dev->chanA.rxdma); +dmafail: + free_dma(dev->chanA.txdma); +fail: + free_irq(irq, dev); +fail1_1: + free_netdev(b->dev[1]->pppdev.dev); +fail1_0: + free_netdev(b->dev[0]->pppdev.dev); +fail2: + kfree(b); +fail3: + release_region(iobase,8); + return NULL; +} + +static void __exit slvl_shutdown(struct slvl_board *b) +{ + int u; + + z8530_shutdown(&b->board); + + for(u=0; u<2; u++) + { + struct net_device *d = b->dev[u]->pppdev.dev; + unregister_netdev(d); + free_netdev(d); + } + + free_irq(b->board.irq, &b->board); + free_dma(b->board.chanA.rxdma); + free_dma(b->board.chanA.txdma); + /* DMA off on the card, drop DTR */ + outb(0, b->iobase); + release_region(b->iobase, 8); + kfree(b); +} + + +static int io=0x238; +static int txdma=1; +static int rxdma=3; +static int irq=5; +static int slow=0; + +module_param(io, int, 0); +MODULE_PARM_DESC(io, "The I/O base of the Sealevel card"); +module_param(txdma, int, 0); +MODULE_PARM_DESC(txdma, "Transmit DMA channel"); +module_param(rxdma, int, 0); +MODULE_PARM_DESC(rxdma, "Receive DMA channel"); +module_param(irq, int, 0); +MODULE_PARM_DESC(irq, "The interrupt line setting for the SeaLevel card"); +module_param(slow, bool, 0); +MODULE_PARM_DESC(slow, "Set this for an older Sealevel card such as the 4012"); + +MODULE_AUTHOR("Alan Cox"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Modular driver for the SeaLevel 4021"); + +static struct slvl_board *slvl_unit; + +static int __init slvl_init_module(void) +{ +#ifdef MODULE + printk(KERN_INFO "SeaLevel Z85230 Synchronous Driver v 0.02.\n"); + printk(KERN_INFO "(c) Copyright 1998, Building Number Three Ltd.\n"); +#endif + slvl_unit = slvl_init(io, irq, txdma, rxdma, slow); + + return slvl_unit ? 0 : -ENODEV; +} + +static void __exit slvl_cleanup_module(void) +{ + if(slvl_unit) + slvl_shutdown(slvl_unit); +} + +module_init(slvl_init_module); +module_exit(slvl_cleanup_module); -- cgit v1.2.3