From 9ca9fb8aa8422595956af9681518cdb8b167055e Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Mon, 16 Mar 2009 22:34:02 -0400 Subject: ath5k: disable MIB interrupts The MIB interrupt fires whenever counters overflow; however without support for automatic noise immunity, we can sometimes get an interrupt storm. The get_stats() callback reads the counters anyway so we can disable the interrupt for now until ANI is implemented. This fixes the issue reported in http://bugzilla.kernel.org/show_bug.cgi?id=12647. Changes-licensed-under: 3-Clause-BSD Cc: stable@kernel.org Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless/ath5k/base.c') diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index cad3ccf61b00..8eec155ed0cc 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -2305,7 +2305,7 @@ ath5k_init(struct ath5k_softc *sc) sc->curband = &sc->sbands[sc->curchan->band]; sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL | AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL | - AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB; + AR5K_INT_FATAL | AR5K_INT_GLOBAL; ret = ath5k_reset(sc, false, false); if (ret) goto done; -- cgit v1.2.3 From e23a9014fd4d502a419255a83e2479ab804c6f16 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Mon, 16 Mar 2009 22:34:03 -0400 Subject: ath5k: remove dummy PCI "retry timeout" fix Remove the PCI retry timeout code, for all the same reasons that Luis Rodriguez removed it for ath9k. Changes-licensed-under: 3-Clause-BSD Cc: Luis Rodriguez Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers/net/wireless/ath5k/base.c') diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 8eec155ed0cc..ef9825fa4ec8 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -685,13 +685,6 @@ ath5k_pci_resume(struct pci_dev *pdev) if (err) return err; - /* - * Suspend/Resume resets the PCI configuration space, so we have to - * re-disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state - */ - pci_write_config_byte(pdev, 0x41, 0); - err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc); if (err) { ATH5K_ERR(sc, "request_irq failed\n"); -- cgit v1.2.3 From 8f655dde240293f3b82313cae91c64ffd7b64c50 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Sun, 15 Mar 2009 22:20:35 +0200 Subject: ath5k: Add tx power calibration support * Add tx power calibration support * Add a few tx power limits * Hardcode default power to 12.5dB * Disable TPC for now v2: Address Jiri's comments Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/net/wireless/ath5k/base.c') diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index ef9825fa4ec8..f28b86c5d346 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -1209,6 +1209,9 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) pktlen = skb->len; + /* FIXME: If we are in g mode and rate is a CCK rate + * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta + * from tx power (value is in dB units already) */ if (info->control.hw_key) { keyidx = info->control.hw_key->hw_key_idx; pktlen += info->control.hw_key->icv_len; @@ -2037,6 +2040,9 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) antenna = sc->bsent & 4 ? 2 : 1; } + /* FIXME: If we are in g mode and rate is a CCK rate + * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta + * from tx power (value is in dB units already) */ ds->ds_data = bf->skbaddr; ret = ah->ah_setup_tx_desc(ah, ds, skb->len, ieee80211_get_hdrlen_from_skb(skb), @@ -2601,12 +2607,6 @@ ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel) goto err; } - /* - * This is needed only to setup initial state - * but it's best done after a reset. - */ - ath5k_hw_set_txpower_limit(sc->ah, 0); - ret = ath5k_rx_start(sc); if (ret) { ATH5K_ERR(sc, "can't start recv logic\n"); -- cgit v1.2.3 From b726604706ad88d8b28bc487e45e710f58cc19ee Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Mon, 2 Mar 2009 21:55:18 -0500 Subject: ath5k: warn and correct rate for unknown hw rate indexes ath5k sets up a mapping table from the hardware rate index to the rate index used by mac80211; however, we have seen some received frames with incorrect rate indexes. Such frames normally get dropped with a warning in __ieee80211_rx(), but it doesn't include enough information to track down the error. This patch adds a warning to hw_to_driver_rix for any lookups that result in a rate index of -1, then returns a valid rate so the frame can be processed. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless/ath5k/base.c') diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index f28b86c5d346..6580df2f7443 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -1088,9 +1088,18 @@ ath5k_mode_setup(struct ath5k_softc *sc) static inline int ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix) { - WARN(hw_rix < 0 || hw_rix >= AR5K_MAX_RATES, - "hw_rix out of bounds: %x\n", hw_rix); - return sc->rate_idx[sc->curband->band][hw_rix]; + int rix; + + /* return base rate on errors */ + if (WARN(hw_rix < 0 || hw_rix >= AR5K_MAX_RATES, + "hw_rix out of bounds: %x\n", hw_rix)) + return 0; + + rix = sc->rate_idx[sc->curband->band][hw_rix]; + if (WARN(rix < 0, "invalid hw_rix: %x\n", hw_rix)) + rix = 0; + + return rix; } /***************\ -- cgit v1.2.3 From 5a0fe8ac70f81b5b91156736066e6445d0dcc61f Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Mon, 23 Mar 2009 23:35:37 -0400 Subject: ath5k: properly drop packets from ops->tx We shouldn't return NETDEV_TX_BUSY from the TX callback, especially after we've mucked with the sk_buffs. Drop the packets and return NETDEV_TX_OK. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers/net/wireless/ath5k/base.c') diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 6580df2f7443..5d57d774e466 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -2562,7 +2562,7 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) if (skb_headroom(skb) < padsize) { ATH5K_ERR(sc, "tx hdrlen not %%4: %d not enough" " headroom to pad %d\n", hdrlen, padsize); - return NETDEV_TX_BUSY; + goto drop_packet; } skb_push(skb, padsize); memmove(skb->data, skb->data+padsize, hdrlen); @@ -2573,7 +2573,7 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) ATH5K_ERR(sc, "no further txbuf available, dropping packet\n"); spin_unlock_irqrestore(&sc->txbuflock, flags); ieee80211_stop_queue(hw, skb_get_queue_mapping(skb)); - return NETDEV_TX_BUSY; + goto drop_packet; } bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list); list_del(&bf->list); @@ -2590,10 +2590,12 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) list_add_tail(&bf->list, &sc->txbuf); sc->txbuf_len++; spin_unlock_irqrestore(&sc->txbuflock, flags); - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; + goto drop_packet; } + return NETDEV_TX_OK; +drop_packet: + dev_kfree_skb_any(skb); return NETDEV_TX_OK; } -- cgit v1.2.3