From 7dab73b37f5e8885cb73efd25e73861f9b4f0246 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 18 Apr 2011 15:27:06 +0200 Subject: rt2x00: Split rt2x00dev->flags The number of flags defined for the rt2x00dev->flags field, has been growing over the years. Currently we are approaching the maximum number of bits which are available in the field. A secondary problem, is that one part of the field are initialized only during boot, because the driver requirements are initialized or device requirements are loaded from the EEPROM. In both cases, the flags are fixed and will not change during device operation. The other flags are the device state, and will change frequently. So far this resulted in the fact that for some flags, the atomic bit accessors are used, while for the others the non-atomic variants are used. By splitting the flags up into a "flags" and "cap_flags" we can put all flags which are fixed inside "cap_flags". This field can then be read non-atomically. In the "flags" field we keep the device state, which is going to be read atomically. This adds more room for more flags in the future, and sanitizes the field access methods. Signed-off-by: Ivo van Doorn Acked-by: Helmut Schaa Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00queue.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers/net/wireless/rt2x00/rt2x00queue.c') diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 9fc4a1ec4b43..d03eef28f036 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -60,7 +60,7 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct queue_entry *entry) * at least 8 bytes bytes available in headroom for IV/EIV * and 8 bytes for ICV data as tailroon. */ - if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { + if (test_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags)) { head_size += 8; tail_size += 8; } @@ -86,7 +86,7 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct queue_entry *entry) memset(skbdesc, 0, sizeof(*skbdesc)); skbdesc->entry = entry; - if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags)) { + if (test_bit(REQUIRE_DMA, &rt2x00dev->cap_flags)) { skbdesc->skb_dma = dma_map_single(rt2x00dev->dev, skb->data, skb->len, @@ -213,7 +213,7 @@ static void rt2x00queue_create_tx_descriptor_seq(struct queue_entry *entry, __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags); - if (!test_bit(DRIVER_REQUIRE_SW_SEQNO, &entry->queue->rt2x00dev->flags)) + if (!test_bit(REQUIRE_SW_SEQNO, &entry->queue->rt2x00dev->cap_flags)) return; /* @@ -396,7 +396,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, rt2x00crypto_create_tx_descriptor(entry, txdesc); rt2x00queue_create_tx_descriptor_seq(entry, txdesc); - if (test_bit(DRIVER_REQUIRE_HT_TX_DESC, &rt2x00dev->flags)) + if (test_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags)) rt2x00ht_create_tx_descriptor(entry, txdesc, hwrate); else rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate); @@ -436,7 +436,7 @@ static int rt2x00queue_write_tx_data(struct queue_entry *entry, /* * Map the skb to DMA. */ - if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags)) + if (test_bit(REQUIRE_DMA, &rt2x00dev->cap_flags)) rt2x00queue_map_txskb(entry); return 0; @@ -529,7 +529,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, */ if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) && !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) { - if (test_bit(DRIVER_REQUIRE_COPY_IV, &queue->rt2x00dev->flags)) + if (test_bit(REQUIRE_COPY_IV, &queue->rt2x00dev->cap_flags)) rt2x00crypto_tx_copy_iv(skb, &txdesc); else rt2x00crypto_tx_remove_iv(skb, &txdesc); @@ -543,9 +543,9 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, * PCI and USB devices, while header alignment only is valid * for PCI devices. */ - if (test_bit(DRIVER_REQUIRE_L2PAD, &queue->rt2x00dev->flags)) + if (test_bit(REQUIRE_L2PAD, &queue->rt2x00dev->cap_flags)) rt2x00queue_insert_l2pad(entry->skb, txdesc.header_length); - else if (test_bit(DRIVER_REQUIRE_DMA, &queue->rt2x00dev->flags)) + else if (test_bit(REQUIRE_DMA, &queue->rt2x00dev->cap_flags)) rt2x00queue_align_frame(entry->skb); /* @@ -1069,7 +1069,7 @@ int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev) if (status) goto exit; - if (test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags)) { + if (test_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags)) { status = rt2x00queue_alloc_entries(rt2x00dev->atim, rt2x00dev->ops->atim); if (status) @@ -1121,7 +1121,7 @@ int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev) struct data_queue *queue; enum data_queue_qid qid; unsigned int req_atim = - !!test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); + !!test_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags); /* * We need the following queues: -- cgit v1.2.3 From 10e11568ca8b8a15f7478f6a4ceebabcbdba1018 Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Mon, 18 Apr 2011 15:27:43 +0200 Subject: rt2x00: Make rt2x00_queue_entry_for_each more flexible Allow passing a void pointer to rt2x00_queue_entry_for_each which in turn in provided to the callback function. Furthermore, allow the callback function to stop processing by returning true. And also notify the caller of rt2x00_queue_entry_for_each if the loop was canceled by the callback. No functional changes, just preparation for an upcoming patch. Signed-off-by: Helmut Schaa Signed-off-by: Ivo van Doorn Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00queue.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-) (limited to 'drivers/net/wireless/rt2x00/rt2x00queue.c') diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index d03eef28f036..458bb489bc7c 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -650,10 +650,12 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev, return ret; } -void rt2x00queue_for_each_entry(struct data_queue *queue, +bool rt2x00queue_for_each_entry(struct data_queue *queue, enum queue_index start, enum queue_index end, - void (*fn)(struct queue_entry *entry)) + void *data, + bool (*fn)(struct queue_entry *entry, + void *data)) { unsigned long irqflags; unsigned int index_start; @@ -664,7 +666,7 @@ void rt2x00queue_for_each_entry(struct data_queue *queue, ERROR(queue->rt2x00dev, "Entry requested from invalid index range (%d - %d)\n", start, end); - return; + return true; } /* @@ -683,15 +685,23 @@ void rt2x00queue_for_each_entry(struct data_queue *queue, * send out all frames in the correct order. */ if (index_start < index_end) { - for (i = index_start; i < index_end; i++) - fn(&queue->entries[i]); + for (i = index_start; i < index_end; i++) { + if (fn(&queue->entries[i], data)) + return true; + } } else { - for (i = index_start; i < queue->limit; i++) - fn(&queue->entries[i]); + for (i = index_start; i < queue->limit; i++) { + if (fn(&queue->entries[i], data)) + return true; + } - for (i = 0; i < index_end; i++) - fn(&queue->entries[i]); + for (i = 0; i < index_end; i++) { + if (fn(&queue->entries[i], data)) + return true; + } } + + return false; } EXPORT_SYMBOL_GPL(rt2x00queue_for_each_entry); -- cgit v1.2.3 From 75256f0348d38f414b7ac50ac78d4a4532bb6762 Mon Sep 17 00:00:00 2001 From: Johannes Stezenbach Date: Mon, 18 Apr 2011 15:29:38 +0200 Subject: rt2x00: fix queue timeout checks Add a timestamp to each queue entry which is updated whenever the status of the entry changes, and remove the per-queue timestamps. The previous check was incorrect and caused both false positives and false negatives. With the corrected check it comes apparent that the TX status usually times out on rt2800usb unless there is sufficient traffic (i.e. the next TX will complete the previous TX status). Signed-off-by: Johannes Stezenbach Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00queue.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers/net/wireless/rt2x00/rt2x00queue.c') diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 458bb489bc7c..df8817fed09e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -561,7 +561,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, set_bit(ENTRY_DATA_PENDING, &entry->flags); - rt2x00queue_index_inc(queue, Q_INDEX); + rt2x00queue_index_inc(entry, Q_INDEX); rt2x00queue_write_tx_descriptor(entry, &txdesc); rt2x00queue_kick_tx_queue(queue, &txdesc); @@ -727,8 +727,9 @@ struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue, } EXPORT_SYMBOL_GPL(rt2x00queue_get_entry); -void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index) +void rt2x00queue_index_inc(struct queue_entry *entry, enum queue_index index) { + struct data_queue *queue = entry->queue; unsigned long irqflags; if (unlikely(index >= Q_INDEX_MAX)) { @@ -743,7 +744,7 @@ void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index) if (queue->index[index] >= queue->limit) queue->index[index] = 0; - queue->last_action[index] = jiffies; + entry->last_action = jiffies; if (index == Q_INDEX) { queue->length++; @@ -969,10 +970,8 @@ static void rt2x00queue_reset(struct data_queue *queue) queue->count = 0; queue->length = 0; - for (i = 0; i < Q_INDEX_MAX; i++) { + for (i = 0; i < Q_INDEX_MAX; i++) queue->index[i] = 0; - queue->last_action[i] = jiffies; - } spin_unlock_irqrestore(&queue->index_lock, irqflags); } -- cgit v1.2.3 From 152a599274b15028604e24ae2d9c9d7f49853977 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 18 Apr 2011 15:31:02 +0200 Subject: rt2x00: Decrease association time for USB devices When powersaving is enabled, assocaition times are very high (for WPA2 networks, the time can easily be around the 3 seconds). This is caused, because the flushing of the queues takes too much time. Without the flushing callback mac80211 assumes a timeout of 100ms while scanning. Limit all flush waiting loops to the same maximum. We can apply this maximum by passing the drop status to the driver, which makes sure the driver performs extra actions during the waiting for the queue to become empty. After these changes, association times fall within the healthy range of ~0.6 seconds with powersaving enabled. The difference between association time between powersaving enabled and disabled is now only ~0.1 second (which can also be due to the measuring method). Signed-off-by: Ivo van Doorn Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00queue.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) (limited to 'drivers/net/wireless/rt2x00/rt2x00queue.c') diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index df8817fed09e..0d79278a0a19 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -849,7 +849,6 @@ EXPORT_SYMBOL_GPL(rt2x00queue_stop_queue); void rt2x00queue_flush_queue(struct data_queue *queue, bool drop) { - unsigned int i; bool started; bool tx_queue = (queue->qid == QID_AC_VO) || @@ -884,20 +883,12 @@ void rt2x00queue_flush_queue(struct data_queue *queue, bool drop) } /* - * Check if driver supports flushing, we can only guarentee - * full support for flushing if the driver is able - * to cancel all pending frames (drop = true). - */ - if (drop && queue->rt2x00dev->ops->lib->flush_queue) - queue->rt2x00dev->ops->lib->flush_queue(queue); - - /* - * When we don't want to drop any frames, or when - * the driver doesn't fully flush the queue correcly, - * we must wait for the queue to become empty. + * Check if driver supports flushing, if that is the case we can + * defer the flushing to the driver. Otherwise we must use the + * alternative which just waits for the queue to become empty. */ - for (i = 0; !rt2x00queue_empty(queue) && i < 100; i++) - msleep(10); + if (likely(queue->rt2x00dev->ops->lib->flush_queue)) + queue->rt2x00dev->ops->lib->flush_queue(queue, drop); /* * The queue flush has failed... -- cgit v1.2.3 From 46a01ec00d05581c5bd0c37e680d5b37af4953b4 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Mon, 18 Apr 2011 15:33:41 +0200 Subject: rt2x00: Merge rt2x00ht.c contents in other files. The two functions that are in rt2x00ht.c can be much better placed closer to the places where the call-sites of these functions are (one in rt2x00config.c and one in rt2x00queue.c) allowing us to make these functions static. Also, conditional compilations doesn't seem to be necessary anymore as 802.11n support is quite common nowadays. This makes the code a bit easier readable and searchable. Signed-off-by: Gertjan van Wingerde Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00queue.c | 81 ++++++++++++++++++++++++++++++- 1 file changed, 80 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless/rt2x00/rt2x00queue.c') diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 0d79278a0a19..56f9d0df9c61 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -302,6 +302,85 @@ static void rt2x00queue_create_tx_descriptor_plcp(struct queue_entry *entry, } } +static void rt2x00queue_create_tx_descriptor_ht(struct queue_entry *entry, + struct txentry_desc *txdesc, + const struct rt2x00_rate *hwrate) +{ + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); + struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0]; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data; + + if (tx_info->control.sta) + txdesc->u.ht.mpdu_density = + tx_info->control.sta->ht_cap.ampdu_density; + + txdesc->u.ht.ba_size = 7; /* FIXME: What value is needed? */ + + /* + * Only one STBC stream is supported for now. + */ + if (tx_info->flags & IEEE80211_TX_CTL_STBC) + txdesc->u.ht.stbc = 1; + + /* + * If IEEE80211_TX_RC_MCS is set txrate->idx just contains the + * mcs rate to be used + */ + if (txrate->flags & IEEE80211_TX_RC_MCS) { + txdesc->u.ht.mcs = txrate->idx; + + /* + * MIMO PS should be set to 1 for STA's using dynamic SM PS + * when using more then one tx stream (>MCS7). + */ + if (tx_info->control.sta && txdesc->u.ht.mcs > 7 && + ((tx_info->control.sta->ht_cap.cap & + IEEE80211_HT_CAP_SM_PS) >> + IEEE80211_HT_CAP_SM_PS_SHIFT) == + WLAN_HT_CAP_SM_PS_DYNAMIC) + __set_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags); + } else { + txdesc->u.ht.mcs = rt2x00_get_rate_mcs(hwrate->mcs); + if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) + txdesc->u.ht.mcs |= 0x08; + } + + /* + * This frame is eligible for an AMPDU, however, don't aggregate + * frames that are intended to probe a specific tx rate. + */ + if (tx_info->flags & IEEE80211_TX_CTL_AMPDU && + !(tx_info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE)) + __set_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags); + + /* + * Set 40Mhz mode if necessary (for legacy rates this will + * duplicate the frame to both channels). + */ + if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH || + txrate->flags & IEEE80211_TX_RC_DUP_DATA) + __set_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags); + if (txrate->flags & IEEE80211_TX_RC_SHORT_GI) + __set_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags); + + /* + * Determine IFS values + * - Use TXOP_BACKOFF for management frames except beacons + * - Use TXOP_SIFS for fragment bursts + * - Use TXOP_HTTXOP for everything else + * + * Note: rt2800 devices won't use CTS protection (if used) + * for frames not transmitted with TXOP_HTTXOP + */ + if (ieee80211_is_mgmt(hdr->frame_control) && + !ieee80211_is_beacon(hdr->frame_control)) + txdesc->u.ht.txop = TXOP_BACKOFF; + else if (!(tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)) + txdesc->u.ht.txop = TXOP_SIFS; + else + txdesc->u.ht.txop = TXOP_HTTXOP; +} + static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, struct txentry_desc *txdesc) { @@ -397,7 +476,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, rt2x00queue_create_tx_descriptor_seq(entry, txdesc); if (test_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags)) - rt2x00ht_create_tx_descriptor(entry, txdesc, hwrate); + rt2x00queue_create_tx_descriptor_ht(entry, txdesc, hwrate); else rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate); } -- cgit v1.2.3