From 166389375d5a3894aa00a9c2e490ac4b9af2a891 Mon Sep 17 00:00:00 2001
From: Helmut Schaa <helmut.schaa@googlemail.com>
Date: Mon, 28 Mar 2011 13:29:44 +0200
Subject: rt2x00: Limit rt2x00pci rxdone processing to 16 entries at once

Instead of receiving an unlimited number of frames, stop after 16
entries and reschedule the rxdone tasklet. This allows other tasklets
to be run inbetween.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2400pci.c | 6 ++++--
 drivers/net/wireless/rt2x00/rt2500pci.c | 6 ++++--
 drivers/net/wireless/rt2x00/rt2800pci.c | 6 ++++--
 drivers/net/wireless/rt2x00/rt2x00pci.c | 7 +++++--
 drivers/net/wireless/rt2x00/rt2x00pci.h | 5 ++++-
 drivers/net/wireless/rt2x00/rt61pci.c   | 6 ++++--
 6 files changed, 25 insertions(+), 11 deletions(-)

(limited to 'drivers/net/wireless/rt2x00')

diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 329f3283697b..137a24e520da 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1368,8 +1368,10 @@ static void rt2400pci_tbtt_tasklet(unsigned long data)
 static void rt2400pci_rxdone_tasklet(unsigned long data)
 {
 	struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
-	rt2x00pci_rxdone(rt2x00dev);
-	rt2400pci_enable_interrupt(rt2x00dev, CSR8_RXDONE);
+	if (rt2x00pci_rxdone(rt2x00dev))
+		tasklet_schedule(&rt2x00dev->rxdone_tasklet);
+	else
+		rt2400pci_enable_interrupt(rt2x00dev, CSR8_RXDONE);
 }
 
 static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance)
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 58277878889e..198fc0a0d77c 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1500,8 +1500,10 @@ static void rt2500pci_tbtt_tasklet(unsigned long data)
 static void rt2500pci_rxdone_tasklet(unsigned long data)
 {
 	struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
-	rt2x00pci_rxdone(rt2x00dev);
-	rt2500pci_enable_interrupt(rt2x00dev, CSR8_RXDONE);
+	if (rt2x00pci_rxdone(rt2x00dev))
+		tasklet_schedule(&rt2x00dev->rxdone_tasklet);
+	else
+		rt2500pci_enable_interrupt(rt2x00dev, CSR8_RXDONE);
 }
 
 static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance)
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 808073aa9dcc..4672dc99fe46 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -806,8 +806,10 @@ static void rt2800pci_tbtt_tasklet(unsigned long data)
 static void rt2800pci_rxdone_tasklet(unsigned long data)
 {
 	struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
-	rt2x00pci_rxdone(rt2x00dev);
-	rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RX_DONE);
+	if (rt2x00pci_rxdone(rt2x00dev))
+		tasklet_schedule(&rt2x00dev->rxdone_tasklet);
+	else
+		rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RX_DONE);
 }
 
 static void rt2800pci_autowake_tasklet(unsigned long data)
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 4dd82b0b0520..9649bd0cd718 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -60,14 +60,15 @@ int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
 }
 EXPORT_SYMBOL_GPL(rt2x00pci_regbusy_read);
 
-void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev)
+bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev)
 {
 	struct data_queue *queue = rt2x00dev->rx;
 	struct queue_entry *entry;
 	struct queue_entry_priv_pci *entry_priv;
 	struct skb_frame_desc *skbdesc;
+	int max_rx = 16;
 
-	while (1) {
+	while (--max_rx) {
 		entry = rt2x00queue_get_entry(queue, Q_INDEX);
 		entry_priv = entry->priv_data;
 
@@ -93,6 +94,8 @@ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev)
 		 */
 		rt2x00lib_rxdone(entry);
 	}
+
+	return !max_rx;
 }
 EXPORT_SYMBOL_GPL(rt2x00pci_rxdone);
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h
index 746ce8fe8cf4..07961b8b369a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.h
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.h
@@ -101,8 +101,11 @@ struct queue_entry_priv_pci {
 /**
  * rt2x00pci_rxdone - Handle RX done events
  * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
+ *
+ * Returns true if there are still rx frames pending and false if all
+ * pending rx frames were processed.
  */
-void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev);
+bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev);
 
 /*
  * Device initialization handlers.
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 77e8113b91e1..8ee1514a7943 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2313,8 +2313,10 @@ static void rt61pci_tbtt_tasklet(unsigned long data)
 static void rt61pci_rxdone_tasklet(unsigned long data)
 {
 	struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
-	rt2x00pci_rxdone(rt2x00dev);
-	rt61pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RXDONE);
+	if (rt2x00pci_rxdone(rt2x00dev))
+		rt2x00pci_rxdone(rt2x00dev);
+	else
+		rt61pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RXDONE);
 }
 
 static void rt61pci_autowake_tasklet(unsigned long data)
-- 
cgit v1.2.3


From 2e7798b7c12bdaab4a4aee76d6d1ab7c986234ac Mon Sep 17 00:00:00 2001
From: Helmut Schaa <helmut.schaa@googlemail.com>
Date: Mon, 28 Mar 2011 13:30:09 +0200
Subject: rt2x00: Limit rt2800pci txdone processing to 16 entries at once

Instead of reporting an unlimited number of tx status reports to
mac80211 stop after 16 frames and reschedule the tx status tasklet.
This allows other tasklets to be run inbetween.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800pci.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless/rt2x00')

diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 4672dc99fe46..d3055147ddfb 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -717,12 +717,13 @@ static void rt2800pci_wakeup(struct rt2x00_dev *rt2x00dev)
 	rt2800_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS);
 }
 
-static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
+static bool rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
 {
 	struct data_queue *queue;
 	struct queue_entry *entry;
 	u32 status;
 	u8 qid;
+	int max_tx_done = 16;
 
 	while (kfifo_get(&rt2x00dev->txstatus_fifo, &status)) {
 		qid = rt2x00_get_field32(status, TX_STA_FIFO_PID_QUEUE);
@@ -759,7 +760,12 @@ static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
 
 		entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
 		rt2800_txdone_entry(entry, status);
+
+		if (--max_tx_done == 0)
+			break;
 	}
+
+	return !max_tx_done;
 }
 
 static void rt2800pci_enable_interrupt(struct rt2x00_dev *rt2x00dev,
@@ -780,7 +786,9 @@ static void rt2800pci_enable_interrupt(struct rt2x00_dev *rt2x00dev,
 
 static void rt2800pci_txstatus_tasklet(unsigned long data)
 {
-	rt2800pci_txdone((struct rt2x00_dev *)data);
+	struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
+	if (rt2800pci_txdone(rt2x00dev))
+		tasklet_schedule(&rt2x00dev->txstatus_tasklet);
 
 	/*
 	 * No need to enable the tx status interrupt here as we always
-- 
cgit v1.2.3


From f78987cf8bb740b7a3636c08e003f1976f860cfc Mon Sep 17 00:00:00 2001
From: Helmut Schaa <helmut.schaa@googlemail.com>
Date: Mon, 28 Mar 2011 13:30:36 +0200
Subject: rt2x00: Calculate tx status fifo size instead of hardcoding it

Instead of hardcoding the tx status fifo size as 512 calculate it based
on the number of tx queues and the number of entries per queue. Also
round the size up to a power of 2 as kfifo would otherwise round it
down.

On rt2800pci this will increase the kfifo size from 512 bytes to 1024
bytes which is then able to hold the tx status for all entries in all
tx queues.

Furthermore, if the number of tx queues or tx entries changes in the
future (use of the MGMT queue for example) the kfifo size doesn't need
to be updated.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00dev.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

(limited to 'drivers/net/wireless/rt2x00')

diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 9de9dbe94399..d63b582b6875 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -27,6 +27,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/log2.h>
 
 #include "rt2x00.h"
 #include "rt2x00lib.h"
@@ -811,13 +812,18 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
 	 */
 	if (test_bit(DRIVER_REQUIRE_TXSTATUS_FIFO, &rt2x00dev->flags)) {
 		/*
-		 * Allocate txstatus fifo and tasklet, we use a size of 512
-		 * for the kfifo which is big enough to store 512/4=128 tx
-		 * status reports. In the worst case (tx status for all tx
-		 * queues gets reported before we've got a chance to handle
-		 * them) 24*4=384 tx status reports need to be cached.
+		 * Allocate the txstatus fifo. In the worst case the tx
+		 * status fifo has to hold the tx status of all entries
+		 * in all tx queues. Hence, calculate the kfifo size as
+		 * tx_queues * entry_num and round up to the nearest
+		 * power of 2.
 		 */
-		status = kfifo_alloc(&rt2x00dev->txstatus_fifo, 512,
+		int kfifo_size =
+			roundup_pow_of_two(rt2x00dev->ops->tx_queues *
+					   rt2x00dev->ops->tx->entry_num *
+					   sizeof(u32));
+
+		status = kfifo_alloc(&rt2x00dev->txstatus_fifo, kfifo_size,
 				     GFP_KERNEL);
 		if (status)
 			return status;
-- 
cgit v1.2.3


From aca7305be5cd9e07f042e6bf6547e7c5635f0041 Mon Sep 17 00:00:00 2001
From: Helmut Schaa <helmut.schaa@googlemail.com>
Date: Mon, 28 Mar 2011 13:30:59 +0200
Subject: rt2x00: Remove DRIVER_SUPPORT_WATCHDOG flag

We can simply check if the driver registered the watchdog callback.
There's no need to have an additional flag for that.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2500usb.c  |  1 -
 drivers/net/wireless/rt2x00/rt2800usb.c  |  1 -
 drivers/net/wireless/rt2x00/rt2x00.h     |  1 -
 drivers/net/wireless/rt2x00/rt2x00link.c | 11 +++++------
 drivers/net/wireless/rt2x00/rt73usb.c    |  1 -
 5 files changed, 5 insertions(+), 10 deletions(-)

(limited to 'drivers/net/wireless/rt2x00')

diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 979fe6596a2d..d9e6cec56cb5 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1796,7 +1796,6 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 		__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
 		__set_bit(DRIVER_REQUIRE_COPY_IV, &rt2x00dev->flags);
 	}
-	__set_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags);
 	__set_bit(DRIVER_REQUIRE_SW_SEQNO, &rt2x00dev->flags);
 
 	/*
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 4e368657a83c..1c99a4f449f5 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -564,7 +564,6 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 	if (!modparam_nohwcrypt)
 		__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
 	__set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
-	__set_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags);
 	__set_bit(DRIVER_REQUIRE_HT_TX_DESC, &rt2x00dev->flags);
 
 	/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index a3940d7300a4..60b1cb05a70d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -674,7 +674,6 @@ enum rt2x00_flags {
 	DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL,
 	DRIVER_SUPPORT_PRE_TBTT_INTERRUPT,
 	DRIVER_SUPPORT_LINK_TUNING,
-	DRIVER_SUPPORT_WATCHDOG,
 
 	/*
 	 * Driver configuration
diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c
index c975b0a12e95..fc8cee91b54e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
@@ -413,12 +413,11 @@ void rt2x00link_start_watchdog(struct rt2x00_dev *rt2x00dev)
 {
 	struct link *link = &rt2x00dev->link;
 
-	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
-	    !test_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags))
-		return;
-
-	ieee80211_queue_delayed_work(rt2x00dev->hw,
-				     &link->watchdog_work, WATCHDOG_INTERVAL);
+	if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
+	    rt2x00dev->ops->lib->watchdog)
+		ieee80211_queue_delayed_work(rt2x00dev->hw,
+					     &link->watchdog_work,
+					     WATCHDOG_INTERVAL);
 }
 
 void rt2x00link_stop_watchdog(struct rt2x00_dev *rt2x00dev)
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 02f1148c577e..149e4f928325 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2209,7 +2209,6 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 	if (!modparam_nohwcrypt)
 		__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
 	__set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
-	__set_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags);
 
 	/*
 	 * Set the rssi offset.
-- 
cgit v1.2.3


From 75faae8b80171b447bfc4bac448308676fb8a663 Mon Sep 17 00:00:00 2001
From: Helmut Schaa <helmut.schaa@googlemail.com>
Date: Mon, 28 Mar 2011 13:31:30 +0200
Subject: rt2x00: Restructure bw_comp calculation

Move the HT40 check inside the calculation function to make it easier
for a later cleanup.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800lib.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

(limited to 'drivers/net/wireless/rt2x00')

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 2ee6cebb9b25..2f8af7a806ec 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1819,11 +1819,15 @@ static int rt2800_get_txpower_bw_comp(struct rt2x00_dev *rt2x00dev,
 	u16 eeprom;
 	u8 comp_en;
 	u8 comp_type;
-	int comp_value;
+	int comp_value = 0;
 
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_TXPOWER_DELTA, &eeprom);
 
-	if (eeprom == 0xffff)
+	/*
+	 * HT40 compensation not required.
+	 */
+	if (eeprom == 0xffff ||
+	    !test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
 		return 0;
 
 	if (band == IEEE80211_BAND_2GHZ) {
@@ -1865,13 +1869,12 @@ static u8 rt2800_compesate_txpower(struct rt2x00_dev *rt2x00dev,
 	u8 eirp_txpower;
 	u8 eirp_txpower_criterion;
 	u8 reg_limit;
-	int bw_comp = 0;
+	int bw_comp;
 
 	if (!((band == IEEE80211_BAND_5GHZ) && is_rate_b))
 		return txpower;
 
-	if (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
-		bw_comp = rt2800_get_txpower_bw_comp(rt2x00dev, band);
+	bw_comp = rt2800_get_txpower_bw_comp(rt2x00dev, band);
 
 	if (test_bit(CONFIG_SUPPORT_POWER_LIMIT, &rt2x00dev->flags)) {
 		/*
-- 
cgit v1.2.3


From 2af242e19f06cfaade7ac8608c9df8af1e0fbb34 Mon Sep 17 00:00:00 2001
From: Helmut Schaa <helmut.schaa@googlemail.com>
Date: Mon, 28 Mar 2011 13:32:01 +0200
Subject: rt2x00: Don't recalculate HT40 compensation for each rate

Previously the HT40 tx power compensation value was calculated for each
rate. However, the calculation is independent of the tx rate and as such
can be precalculated and just passed in for each rate.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800lib.c | 32 ++++++++++++++++++--------------
 1 file changed, 18 insertions(+), 14 deletions(-)

(limited to 'drivers/net/wireless/rt2x00')

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 2f8af7a806ec..26ac8927a7c5 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1861,7 +1861,8 @@ static u8 rt2800_compesate_txpower(struct rt2x00_dev *rt2x00dev,
 				     int is_rate_b,
 				     enum ieee80211_band band,
 				     int power_level,
-				     u8 txpower)
+				     u8 txpower,
+				     int delta)
 {
 	u32 reg;
 	u16 eeprom;
@@ -1869,13 +1870,10 @@ static u8 rt2800_compesate_txpower(struct rt2x00_dev *rt2x00dev,
 	u8 eirp_txpower;
 	u8 eirp_txpower_criterion;
 	u8 reg_limit;
-	int bw_comp;
 
 	if (!((band == IEEE80211_BAND_5GHZ) && is_rate_b))
 		return txpower;
 
-	bw_comp = rt2800_get_txpower_bw_comp(rt2x00dev, band);
-
 	if (test_bit(CONFIG_SUPPORT_POWER_LIMIT, &rt2x00dev->flags)) {
 		/*
 		 * Check if eirp txpower exceed txpower_limit.
@@ -1898,14 +1896,14 @@ static u8 rt2800_compesate_txpower(struct rt2x00_dev *rt2x00dev,
 						 EEPROM_EIRP_MAX_TX_POWER_5GHZ);
 
 		eirp_txpower = eirp_txpower_criterion + (txpower - criterion) +
-				       (is_rate_b ? 4 : 0) + bw_comp;
+			       (is_rate_b ? 4 : 0) + delta;
 
 		reg_limit = (eirp_txpower > power_level) ?
 					(eirp_txpower - power_level) : 0;
 	} else
 		reg_limit = 0;
 
-	return txpower + bw_comp - reg_limit;
+	return txpower + delta - reg_limit;
 }
 
 static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
@@ -1919,6 +1917,12 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
 	u32 offset;
 	enum ieee80211_band band = conf->channel->band;
 	int power_level = conf->power_level;
+	int delta;
+
+	/*
+	 * Calculate HT40 compensation delta
+	 */
+	delta = rt2800_get_txpower_bw_comp(rt2x00dev, band);
 
 	/*
 	 * set to normal bbp tx power control mode: +/- 0dBm
@@ -1948,7 +1952,7 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
 		txpower = rt2x00_get_field16(eeprom,
 					     EEPROM_TXPOWER_BYRATE_RATE0);
 		txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
-					     power_level, txpower);
+					     power_level, txpower, delta);
 		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE0, txpower);
 
 		/*
@@ -1959,7 +1963,7 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
 		txpower = rt2x00_get_field16(eeprom,
 					     EEPROM_TXPOWER_BYRATE_RATE1);
 		txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
-					     power_level, txpower);
+					     power_level, txpower, delta);
 		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE1, txpower);
 
 		/*
@@ -1970,7 +1974,7 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
 		txpower = rt2x00_get_field16(eeprom,
 					     EEPROM_TXPOWER_BYRATE_RATE2);
 		txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
-					     power_level, txpower);
+					     power_level, txpower, delta);
 		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE2, txpower);
 
 		/*
@@ -1981,7 +1985,7 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
 		txpower = rt2x00_get_field16(eeprom,
 					     EEPROM_TXPOWER_BYRATE_RATE3);
 		txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
-					     power_level, txpower);
+					     power_level, txpower, delta);
 		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE3, txpower);
 
 		/* read the next four txpower values */
@@ -1997,7 +2001,7 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
 		txpower = rt2x00_get_field16(eeprom,
 					     EEPROM_TXPOWER_BYRATE_RATE0);
 		txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
-					     power_level, txpower);
+					     power_level, txpower, delta);
 		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE4, txpower);
 
 		/*
@@ -2008,7 +2012,7 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
 		txpower = rt2x00_get_field16(eeprom,
 					     EEPROM_TXPOWER_BYRATE_RATE1);
 		txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
-					     power_level, txpower);
+					     power_level, txpower, delta);
 		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE5, txpower);
 
 		/*
@@ -2019,7 +2023,7 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
 		txpower = rt2x00_get_field16(eeprom,
 					     EEPROM_TXPOWER_BYRATE_RATE2);
 		txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
-					     power_level, txpower);
+					     power_level, txpower, delta);
 		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE6, txpower);
 
 		/*
@@ -2030,7 +2034,7 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
 		txpower = rt2x00_get_field16(eeprom,
 					     EEPROM_TXPOWER_BYRATE_RATE3);
 		txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
-					     power_level, txpower);
+					     power_level, txpower, delta);
 		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE7, txpower);
 
 		rt2800_register_write(rt2x00dev, offset, reg);
-- 
cgit v1.2.3


From fa71a160272c0eec9c04102ab2a82befb7cb107f Mon Sep 17 00:00:00 2001
From: Helmut Schaa <helmut.schaa@googlemail.com>
Date: Mon, 28 Mar 2011 13:32:32 +0200
Subject: rt2x00: Indention cleanup in rt2800lib

Fix the indention in rt2800_compesate_txpower and also fix a typo in
the function name rt2800_compesate_txpower -> rt2800_compensate_txpower.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800lib.c | 25 +++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)

(limited to 'drivers/net/wireless/rt2x00')

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 26ac8927a7c5..026513349370 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1857,12 +1857,9 @@ static int rt2800_get_txpower_bw_comp(struct rt2x00_dev *rt2x00dev,
 	return comp_value;
 }
 
-static u8 rt2800_compesate_txpower(struct rt2x00_dev *rt2x00dev,
-				     int is_rate_b,
-				     enum ieee80211_band band,
-				     int power_level,
-				     u8 txpower,
-				     int delta)
+static u8 rt2800_compensate_txpower(struct rt2x00_dev *rt2x00dev, int is_rate_b,
+				   enum ieee80211_band band, int power_level,
+				   u8 txpower, int delta)
 {
 	u32 reg;
 	u16 eeprom;
@@ -1951,7 +1948,7 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
 		 */
 		txpower = rt2x00_get_field16(eeprom,
 					     EEPROM_TXPOWER_BYRATE_RATE0);
-		txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+		txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
 					     power_level, txpower, delta);
 		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE0, txpower);
 
@@ -1962,7 +1959,7 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
 		 */
 		txpower = rt2x00_get_field16(eeprom,
 					     EEPROM_TXPOWER_BYRATE_RATE1);
-		txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+		txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
 					     power_level, txpower, delta);
 		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE1, txpower);
 
@@ -1973,7 +1970,7 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
 		 */
 		txpower = rt2x00_get_field16(eeprom,
 					     EEPROM_TXPOWER_BYRATE_RATE2);
-		txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+		txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
 					     power_level, txpower, delta);
 		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE2, txpower);
 
@@ -1984,7 +1981,7 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
 		 */
 		txpower = rt2x00_get_field16(eeprom,
 					     EEPROM_TXPOWER_BYRATE_RATE3);
-		txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+		txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
 					     power_level, txpower, delta);
 		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE3, txpower);
 
@@ -2000,7 +1997,7 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
 		 */
 		txpower = rt2x00_get_field16(eeprom,
 					     EEPROM_TXPOWER_BYRATE_RATE0);
-		txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+		txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
 					     power_level, txpower, delta);
 		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE4, txpower);
 
@@ -2011,7 +2008,7 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
 		 */
 		txpower = rt2x00_get_field16(eeprom,
 					     EEPROM_TXPOWER_BYRATE_RATE1);
-		txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+		txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
 					     power_level, txpower, delta);
 		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE5, txpower);
 
@@ -2022,7 +2019,7 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
 		 */
 		txpower = rt2x00_get_field16(eeprom,
 					     EEPROM_TXPOWER_BYRATE_RATE2);
-		txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+		txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
 					     power_level, txpower, delta);
 		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE6, txpower);
 
@@ -2033,7 +2030,7 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
 		 */
 		txpower = rt2x00_get_field16(eeprom,
 					     EEPROM_TXPOWER_BYRATE_RATE3);
-		txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+		txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
 					     power_level, txpower, delta);
 		rt2x00_set_field32(&reg, TX_PWR_CFG_RATE7, txpower);
 
-- 
cgit v1.2.3


From 2f2bb7e8bdc977c94cdaaf84328526555eba89b1 Mon Sep 17 00:00:00 2001
From: Helmut Schaa <helmut.schaa@googlemail.com>
Date: Mon, 28 Mar 2011 13:33:04 +0200
Subject: rt2x00: Remove obsolete rt2x00queue_align_payload

Since commit d1c3a37ceeb1a5ea02991a0476355f1a1d3b3e83 ("mac80211:
clarify alignment docs, fix up alignment") removed the requirement
for a 4-byte aligned payload rt2x00queue_align_payload is obsolete
as mac80211 will align the payload when it passes the frame to the
net stack.

As a result we can remove the call to rt2x00queue_align_payload in the
rx path and since that's the last user we can remove
rt2x00queue_align_payload altogether.

One advantage is that we save some alignment operations for frames
that don't need to be aligned (for example beause they are not passed
to the net stack).

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00dev.c   |  2 --
 drivers/net/wireless/rt2x00/rt2x00lib.h   | 10 ----------
 drivers/net/wireless/rt2x00/rt2x00queue.c | 13 -------------
 3 files changed, 25 deletions(-)

(limited to 'drivers/net/wireless/rt2x00')

diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index d63b582b6875..55c1d0332b2a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -512,8 +512,6 @@ void rt2x00lib_rxdone(struct queue_entry *entry)
 		 (rxdesc.size > header_length) &&
 		 (rxdesc.dev_flags & RXDONE_L2PAD))
 		rt2x00queue_remove_l2pad(entry->skb, header_length);
-	else
-		rt2x00queue_align_payload(entry->skb, header_length);
 
 	/* Trim buffer to correct size */
 	skb_trim(entry->skb, rxdesc.size);
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 2d94cbaf5f4a..63c40d457244 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -118,16 +118,6 @@ void rt2x00queue_free_skb(struct queue_entry *entry);
  */
 void rt2x00queue_align_frame(struct sk_buff *skb);
 
-/**
- * rt2x00queue_align_payload - Align 802.11 payload to 4-byte boundary
- * @skb: The skb to align
- * @header_length: Length of 802.11 header
- *
- * Align the 802.11 payload to a 4-byte boundary, this could
- * mean the header is not aligned properly though.
- */
-void rt2x00queue_align_payload(struct sk_buff *skb, unsigned int header_length);
-
 /**
  * rt2x00queue_insert_l2pad - Align 802.11 header & payload to 4-byte boundary
  * @skb: The skb to align
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 4b3c70eeef1f..5d8925991ffb 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -148,19 +148,6 @@ void rt2x00queue_align_frame(struct sk_buff *skb)
 	skb_trim(skb, frame_length);
 }
 
-void rt2x00queue_align_payload(struct sk_buff *skb, unsigned int header_length)
-{
-	unsigned int frame_length = skb->len;
-	unsigned int align = ALIGN_SIZE(skb, header_length);
-
-	if (!align)
-		return;
-
-	skb_push(skb, align);
-	memmove(skb->data, skb->data + align, frame_length);
-	skb_trim(skb, frame_length);
-}
-
 void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length)
 {
 	unsigned int payload_length = skb->len - header_length;
-- 
cgit v1.2.3


From 9e33a3553821418b2c4f53d09311476c55176b13 Mon Sep 17 00:00:00 2001
From: Helmut Schaa <helmut.schaa@googlemail.com>
Date: Mon, 28 Mar 2011 13:33:40 +0200
Subject: rt2x00: Implement tx power temperature compensation

rt2800 devices should adjust their tx power in accordance with the
eeproms temperature calibration values. Add a new driver callback
gain_calibration that is called every 4 seconds.

The rt2800 gain calibration routine simply runs the tx power
configuration that takes care of calculating the temperature
compensation delta.

We don't need to synchronize the calls to rt2800_config_txpower
as they should all happen from mac80211's single threaded workqueue.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800.h     | 106 ++++++++++++++++++++++++
 drivers/net/wireless/rt2x00/rt2800lib.c  | 133 +++++++++++++++++++++++++++++--
 drivers/net/wireless/rt2x00/rt2800lib.h  |   1 +
 drivers/net/wireless/rt2x00/rt2800pci.c  |   1 +
 drivers/net/wireless/rt2x00/rt2800usb.c  |   1 +
 drivers/net/wireless/rt2x00/rt2x00.h     |   6 ++
 drivers/net/wireless/rt2x00/rt2x00dev.c  |   2 +
 drivers/net/wireless/rt2x00/rt2x00lib.h  |  13 +++
 drivers/net/wireless/rt2x00/rt2x00link.c |  38 +++++++++
 9 files changed, 296 insertions(+), 5 deletions(-)

(limited to 'drivers/net/wireless/rt2x00')

diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 70b9abbdeb9e..3b3d851fe266 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -2103,6 +2103,59 @@ struct mac_iveiv_entry {
 #define EEPROM_TXPOWER_BG_1		FIELD16(0x00ff)
 #define EEPROM_TXPOWER_BG_2		FIELD16(0xff00)
 
+/*
+ * EEPROM temperature compensation boundaries 802.11BG
+ * MINUS4: If the actual TSSI is below this boundary, tx power needs to be
+ *         reduced by (agc_step * -4)
+ * MINUS3: If the actual TSSI is below this boundary, tx power needs to be
+ *         reduced by (agc_step * -3)
+ */
+#define EEPROM_TSSI_BOUND_BG1		0x0037
+#define EEPROM_TSSI_BOUND_BG1_MINUS4	FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_BG1_MINUS3	FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11BG
+ * MINUS2: If the actual TSSI is below this boundary, tx power needs to be
+ *         reduced by (agc_step * -2)
+ * MINUS1: If the actual TSSI is below this boundary, tx power needs to be
+ *         reduced by (agc_step * -1)
+ */
+#define EEPROM_TSSI_BOUND_BG2		0x0038
+#define EEPROM_TSSI_BOUND_BG2_MINUS2	FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_BG2_MINUS1	FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11BG
+ * REF: Reference TSSI value, no tx power changes needed
+ * PLUS1: If the actual TSSI is above this boundary, tx power needs to be
+ *        increased by (agc_step * 1)
+ */
+#define EEPROM_TSSI_BOUND_BG3		0x0039
+#define EEPROM_TSSI_BOUND_BG3_REF	FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_BG3_PLUS1	FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11BG
+ * PLUS2: If the actual TSSI is above this boundary, tx power needs to be
+ *        increased by (agc_step * 2)
+ * PLUS3: If the actual TSSI is above this boundary, tx power needs to be
+ *        increased by (agc_step * 3)
+ */
+#define EEPROM_TSSI_BOUND_BG4		0x003a
+#define EEPROM_TSSI_BOUND_BG4_PLUS2	FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_BG4_PLUS3	FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11BG
+ * PLUS4: If the actual TSSI is above this boundary, tx power needs to be
+ *        increased by (agc_step * 4)
+ * AGC_STEP: Temperature compensation step.
+ */
+#define EEPROM_TSSI_BOUND_BG5		0x003b
+#define EEPROM_TSSI_BOUND_BG5_PLUS4	FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_BG5_AGC_STEP	FIELD16(0xff00)
+
 /*
  * EEPROM TXPOWER 802.11A
  */
@@ -2112,6 +2165,59 @@ struct mac_iveiv_entry {
 #define EEPROM_TXPOWER_A_1		FIELD16(0x00ff)
 #define EEPROM_TXPOWER_A_2		FIELD16(0xff00)
 
+/*
+ * EEPROM temperature compensation boundaries 802.11A
+ * MINUS4: If the actual TSSI is below this boundary, tx power needs to be
+ *         reduced by (agc_step * -4)
+ * MINUS3: If the actual TSSI is below this boundary, tx power needs to be
+ *         reduced by (agc_step * -3)
+ */
+#define EEPROM_TSSI_BOUND_A1		0x006a
+#define EEPROM_TSSI_BOUND_A1_MINUS4	FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_A1_MINUS3	FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11A
+ * MINUS2: If the actual TSSI is below this boundary, tx power needs to be
+ *         reduced by (agc_step * -2)
+ * MINUS1: If the actual TSSI is below this boundary, tx power needs to be
+ *         reduced by (agc_step * -1)
+ */
+#define EEPROM_TSSI_BOUND_A2		0x006b
+#define EEPROM_TSSI_BOUND_A2_MINUS2	FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_A2_MINUS1	FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11A
+ * REF: Reference TSSI value, no tx power changes needed
+ * PLUS1: If the actual TSSI is above this boundary, tx power needs to be
+ *        increased by (agc_step * 1)
+ */
+#define EEPROM_TSSI_BOUND_A3		0x006c
+#define EEPROM_TSSI_BOUND_A3_REF	FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_A3_PLUS1	FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11A
+ * PLUS2: If the actual TSSI is above this boundary, tx power needs to be
+ *        increased by (agc_step * 2)
+ * PLUS3: If the actual TSSI is above this boundary, tx power needs to be
+ *        increased by (agc_step * 3)
+ */
+#define EEPROM_TSSI_BOUND_A4		0x006d
+#define EEPROM_TSSI_BOUND_A4_PLUS2	FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_A4_PLUS3	FIELD16(0xff00)
+
+/*
+ * EEPROM temperature compensation boundaries 802.11A
+ * PLUS4: If the actual TSSI is above this boundary, tx power needs to be
+ *        increased by (agc_step * 4)
+ * AGC_STEP: Temperature compensation step.
+ */
+#define EEPROM_TSSI_BOUND_A5		0x006e
+#define EEPROM_TSSI_BOUND_A5_PLUS4	FIELD16(0x00ff)
+#define EEPROM_TSSI_BOUND_A5_AGC_STEP	FIELD16(0xff00)
+
 /*
  * EEPROM TXPOWER by rate: tx power per tx rate for HT20 mode
  */
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 026513349370..59302faec395 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1813,6 +1813,116 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 	rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC, &reg);
 }
 
+static int rt2800_get_gain_calibration_delta(struct rt2x00_dev *rt2x00dev)
+{
+	u8 tssi_bounds[9];
+	u8 current_tssi;
+	u16 eeprom;
+	u8 step;
+	int i;
+
+	/*
+	 * Read TSSI boundaries for temperature compensation from
+	 * the EEPROM.
+	 *
+	 * Array idx               0    1    2    3    4    5    6    7    8
+	 * Matching Delta value   -4   -3   -2   -1    0   +1   +2   +3   +4
+	 * Example TSSI bounds  0xF0 0xD0 0xB5 0xA0 0x88 0x45 0x25 0x15 0x00
+	 */
+	if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG1, &eeprom);
+		tssi_bounds[0] = rt2x00_get_field16(eeprom,
+					EEPROM_TSSI_BOUND_BG1_MINUS4);
+		tssi_bounds[1] = rt2x00_get_field16(eeprom,
+					EEPROM_TSSI_BOUND_BG1_MINUS3);
+
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG2, &eeprom);
+		tssi_bounds[2] = rt2x00_get_field16(eeprom,
+					EEPROM_TSSI_BOUND_BG2_MINUS2);
+		tssi_bounds[3] = rt2x00_get_field16(eeprom,
+					EEPROM_TSSI_BOUND_BG2_MINUS1);
+
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG3, &eeprom);
+		tssi_bounds[4] = rt2x00_get_field16(eeprom,
+					EEPROM_TSSI_BOUND_BG3_REF);
+		tssi_bounds[5] = rt2x00_get_field16(eeprom,
+					EEPROM_TSSI_BOUND_BG3_PLUS1);
+
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG4, &eeprom);
+		tssi_bounds[6] = rt2x00_get_field16(eeprom,
+					EEPROM_TSSI_BOUND_BG4_PLUS2);
+		tssi_bounds[7] = rt2x00_get_field16(eeprom,
+					EEPROM_TSSI_BOUND_BG4_PLUS3);
+
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG5, &eeprom);
+		tssi_bounds[8] = rt2x00_get_field16(eeprom,
+					EEPROM_TSSI_BOUND_BG5_PLUS4);
+
+		step = rt2x00_get_field16(eeprom,
+					  EEPROM_TSSI_BOUND_BG5_AGC_STEP);
+	} else {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A1, &eeprom);
+		tssi_bounds[0] = rt2x00_get_field16(eeprom,
+					EEPROM_TSSI_BOUND_A1_MINUS4);
+		tssi_bounds[1] = rt2x00_get_field16(eeprom,
+					EEPROM_TSSI_BOUND_A1_MINUS3);
+
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A2, &eeprom);
+		tssi_bounds[2] = rt2x00_get_field16(eeprom,
+					EEPROM_TSSI_BOUND_A2_MINUS2);
+		tssi_bounds[3] = rt2x00_get_field16(eeprom,
+					EEPROM_TSSI_BOUND_A2_MINUS1);
+
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A3, &eeprom);
+		tssi_bounds[4] = rt2x00_get_field16(eeprom,
+					EEPROM_TSSI_BOUND_A3_REF);
+		tssi_bounds[5] = rt2x00_get_field16(eeprom,
+					EEPROM_TSSI_BOUND_A3_PLUS1);
+
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A4, &eeprom);
+		tssi_bounds[6] = rt2x00_get_field16(eeprom,
+					EEPROM_TSSI_BOUND_A4_PLUS2);
+		tssi_bounds[7] = rt2x00_get_field16(eeprom,
+					EEPROM_TSSI_BOUND_A4_PLUS3);
+
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A5, &eeprom);
+		tssi_bounds[8] = rt2x00_get_field16(eeprom,
+					EEPROM_TSSI_BOUND_A5_PLUS4);
+
+		step = rt2x00_get_field16(eeprom,
+					  EEPROM_TSSI_BOUND_A5_AGC_STEP);
+	}
+
+	/*
+	 * Check if temperature compensation is supported.
+	 */
+	if (tssi_bounds[4] == 0xff)
+		return 0;
+
+	/*
+	 * Read current TSSI (BBP 49).
+	 */
+	rt2800_bbp_read(rt2x00dev, 49, &current_tssi);
+
+	/*
+	 * Compare TSSI value (BBP49) with the compensation boundaries
+	 * from the EEPROM and increase or decrease tx power.
+	 */
+	for (i = 0; i <= 3; i++) {
+		if (current_tssi > tssi_bounds[i])
+			break;
+	}
+
+	if (i == 4) {
+		for (i = 8; i >= 5; i--) {
+			if (current_tssi < tssi_bounds[i])
+				break;
+		}
+	}
+
+	return (i - 4) * step;
+}
+
 static int rt2800_get_txpower_bw_comp(struct rt2x00_dev *rt2x00dev,
 				      enum ieee80211_band band)
 {
@@ -1904,7 +2014,8 @@ static u8 rt2800_compensate_txpower(struct rt2x00_dev *rt2x00dev, int is_rate_b,
 }
 
 static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
-				  struct ieee80211_conf *conf)
+				  enum ieee80211_band band,
+				  int power_level)
 {
 	u8 txpower;
 	u16 eeprom;
@@ -1912,8 +2023,6 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
 	u32 reg;
 	u8 r1;
 	u32 offset;
-	enum ieee80211_band band = conf->channel->band;
-	int power_level = conf->power_level;
 	int delta;
 
 	/*
@@ -1921,6 +2030,11 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
 	 */
 	delta = rt2800_get_txpower_bw_comp(rt2x00dev, band);
 
+	/*
+	 * calculate temperature compensation delta
+	 */
+	delta += rt2800_get_gain_calibration_delta(rt2x00dev);
+
 	/*
 	 * set to normal bbp tx power control mode: +/- 0dBm
 	 */
@@ -2041,6 +2155,13 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
 	}
 }
 
+void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev)
+{
+	rt2800_config_txpower(rt2x00dev, rt2x00dev->curr_band,
+			      rt2x00dev->tx_power);
+}
+EXPORT_SYMBOL_GPL(rt2800_gain_calibration);
+
 static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev,
 				      struct rt2x00lib_conf *libconf)
 {
@@ -2094,10 +2215,12 @@ void rt2800_config(struct rt2x00_dev *rt2x00dev,
 	if (flags & IEEE80211_CONF_CHANGE_CHANNEL) {
 		rt2800_config_channel(rt2x00dev, libconf->conf,
 				      &libconf->rf, &libconf->channel);
-		rt2800_config_txpower(rt2x00dev, libconf->conf);
+		rt2800_config_txpower(rt2x00dev, libconf->conf->channel->band,
+				      libconf->conf->power_level);
 	}
 	if (flags & IEEE80211_CONF_CHANGE_POWER)
-		rt2800_config_txpower(rt2x00dev, libconf->conf);
+		rt2800_config_txpower(rt2x00dev, libconf->conf->channel->band,
+				      libconf->conf->power_level);
 	if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
 		rt2800_config_retry_limit(rt2x00dev, libconf);
 	if (flags & IEEE80211_CONF_CHANGE_PS)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index 0c92d86a36f4..f2d15941c71a 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -181,6 +181,7 @@ void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual);
 void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual);
 void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
 		       const u32 count);
+void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev);
 
 int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev);
 void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index d3055147ddfb..adc3534254df 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -1053,6 +1053,7 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
 	.link_stats		= rt2800_link_stats,
 	.reset_tuner		= rt2800_reset_tuner,
 	.link_tuner		= rt2800_link_tuner,
+	.gain_calibration	= rt2800_gain_calibration,
 	.start_queue		= rt2800pci_start_queue,
 	.kick_queue		= rt2800pci_kick_queue,
 	.stop_queue		= rt2800pci_stop_queue,
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 1c99a4f449f5..8b3ab3f17eb3 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -629,6 +629,7 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
 	.link_stats		= rt2800_link_stats,
 	.reset_tuner		= rt2800_reset_tuner,
 	.link_tuner		= rt2800_link_tuner,
+	.gain_calibration	= rt2800_gain_calibration,
 	.watchdog		= rt2800usb_watchdog,
 	.start_queue		= rt2800usb_start_queue,
 	.kick_queue		= rt2x00usb_kick_queue,
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 60b1cb05a70d..dd0f66ade6e8 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -348,6 +348,11 @@ struct link {
 	 * to bring the device/driver back into the desired state.
 	 */
 	struct delayed_work watchdog_work;
+
+	/*
+	 * Work structure for scheduling periodic AGC adjustments.
+	 */
+	struct delayed_work agc_work;
 };
 
 enum rt2x00_delayed_flags {
@@ -556,6 +561,7 @@ struct rt2x00lib_ops {
 			     struct link_qual *qual);
 	void (*link_tuner) (struct rt2x00_dev *rt2x00dev,
 			    struct link_qual *qual, const u32 count);
+	void (*gain_calibration) (struct rt2x00_dev *rt2x00dev);
 
 	/*
 	 * Data queue handlers.
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 55c1d0332b2a..a98c43485239 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -71,6 +71,7 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
 	 */
 	rt2x00queue_start_queues(rt2x00dev);
 	rt2x00link_start_tuner(rt2x00dev);
+	rt2x00link_start_agc(rt2x00dev);
 
 	/*
 	 * Start watchdog monitoring.
@@ -93,6 +94,7 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Stop all queues
 	 */
+	rt2x00link_stop_agc(rt2x00dev);
 	rt2x00link_stop_tuner(rt2x00dev);
 	rt2x00queue_stop_queues(rt2x00dev);
 	rt2x00queue_flush_queues(rt2x00dev, true);
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 63c40d457244..88f2f9275528 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -32,6 +32,7 @@
  */
 #define WATCHDOG_INTERVAL	round_jiffies_relative(HZ)
 #define LINK_TUNE_INTERVAL	round_jiffies_relative(HZ)
+#define AGC_INTERVAL		round_jiffies_relative(4 * HZ)
 
 /*
  * rt2x00_rate: Per rate device information
@@ -270,6 +271,18 @@ void rt2x00link_start_watchdog(struct rt2x00_dev *rt2x00dev);
  */
 void rt2x00link_stop_watchdog(struct rt2x00_dev *rt2x00dev);
 
+/**
+ * rt2x00link_start_agc - Start periodic gain calibration
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ */
+void rt2x00link_start_agc(struct rt2x00_dev *rt2x00dev);
+
+/**
+ * rt2x00link_stop_agc - Stop periodic gain calibration
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ */
+void rt2x00link_stop_agc(struct rt2x00_dev *rt2x00dev);
+
 /**
  * rt2x00link_register - Initialize link tuning & watchdog functionality
  * @rt2x00dev: Pointer to &struct rt2x00_dev.
diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c
index fc8cee91b54e..128b3615c08c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
@@ -446,8 +446,46 @@ static void rt2x00link_watchdog(struct work_struct *work)
 					     WATCHDOG_INTERVAL);
 }
 
+void rt2x00link_start_agc(struct rt2x00_dev *rt2x00dev)
+{
+	struct link *link = &rt2x00dev->link;
+
+	if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
+	    rt2x00dev->ops->lib->gain_calibration)
+		ieee80211_queue_delayed_work(rt2x00dev->hw,
+					     &link->agc_work,
+					     AGC_INTERVAL);
+}
+
+void rt2x00link_stop_agc(struct rt2x00_dev *rt2x00dev)
+{
+	cancel_delayed_work_sync(&rt2x00dev->link.agc_work);
+}
+
+static void rt2x00link_agc(struct work_struct *work)
+{
+	struct rt2x00_dev *rt2x00dev =
+	    container_of(work, struct rt2x00_dev, link.agc_work.work);
+	struct link *link = &rt2x00dev->link;
+
+	/*
+	 * When the radio is shutting down we should
+	 * immediately cease the watchdog monitoring.
+	 */
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+		return;
+
+	rt2x00dev->ops->lib->gain_calibration(rt2x00dev);
+
+	if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+		ieee80211_queue_delayed_work(rt2x00dev->hw,
+					     &link->agc_work,
+					     AGC_INTERVAL);
+}
+
 void rt2x00link_register(struct rt2x00_dev *rt2x00dev)
 {
+	INIT_DELAYED_WORK(&rt2x00dev->link.agc_work, rt2x00link_agc);
 	INIT_DELAYED_WORK(&rt2x00dev->link.watchdog_work, rt2x00link_watchdog);
 	INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00link_tuner);
 }
-- 
cgit v1.2.3


From 351151e8ace033fe3b1977516b32a6c76e9a3f6d Mon Sep 17 00:00:00 2001
From: Helmut Schaa <helmut.schaa@googlemail.com>
Date: Mon, 28 Mar 2011 13:34:15 +0200
Subject: rt2x00: Fix STBC transmissions to STAs with Rx STBC > 1

For STBC transmissions rt2x00 used the number of RxSTBC streams the
destination STA indicates in its HT capabilities as STBC value in
the TXWI.

However, the legacy drivers and our own comment in rt2800.h suggest
that the STBC field in the TXWI only allows a value of 0 or 1.
The values 2 and 3 are reserved (probably for future devices).

And indeed, STBC transmissions to STAs indicating more then 1
RxSTBC stream fail when the STBC field is set to something >1.

Fix this by only setting the STBC field to 1 when STBC should be
used.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00ht.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless/rt2x00')

diff --git a/drivers/net/wireless/rt2x00/rt2x00ht.c b/drivers/net/wireless/rt2x00/rt2x00ht.c
index ae1219dffaae..e8c0c3e92c2f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00ht.c
+++ b/drivers/net/wireless/rt2x00/rt2x00ht.c
@@ -43,8 +43,11 @@ void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
 
 	txdesc->u.ht.ba_size = 7;	/* FIXME: What value is needed? */
 
-	txdesc->u.ht.stbc =
-	    (tx_info->flags & IEEE80211_TX_CTL_STBC) >> IEEE80211_TX_CTL_STBC_SHIFT;
+	/*
+	 * Only one STBC stream is supported for now.
+	 */
+	if (tx_info->flags & IEEE80211_TX_CTL_STBC)
+		txdesc->u.ht.stbc = 1;
 
 	/*
 	 * If IEEE80211_TX_RC_MCS is set txrate->idx just contains the
-- 
cgit v1.2.3


From b35e77cf84137bbb4b6888dc90616eb0b452ea36 Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com>
Date: Mon, 28 Mar 2011 13:34:50 +0200
Subject: rt2x00: Add support for the ZyXEL NWD-211AN USB

Add new USB ID

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800usb.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net/wireless/rt2x00')

diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 8b3ab3f17eb3..262bf669e1b1 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -877,6 +877,7 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x5a57, 0x5257), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Zyxel */
 	{ USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0586, 0x3418), USB_DEVICE_DATA(&rt2800usb_ops) },
 #ifdef CONFIG_RT2800USB_RT33XX
 	/* Ralink */
 	{ USB_DEVICE(0x148f, 0x3370), USB_DEVICE_DATA(&rt2800usb_ops) },
-- 
cgit v1.2.3


From f16d2db704b873d34cec54f992637f3579e10e08 Mon Sep 17 00:00:00 2001
From: Helmut Schaa <helmut.schaa@googlemail.com>
Date: Mon, 28 Mar 2011 13:35:21 +0200
Subject: rt2x00: Fix tx aggregation problems with some clients

Some clients seem to rely upon the reception of BlockAckReqs to flush
their rx reorder buffer. In order to fix aggregation for these clients
rt2x00 should send a BlockAckReq if the transmission of an AMPDU
subframe fails.

Introduce a new flag TXDONE_AMPDU to indicate that this is an AMPDU
subframe and pass IEEE80211_TX_STAT_AMPDU_NO_BACK to mac80211 if an
AMPDU subframe failed during transmission.

This fixes aggregation problems with Intel 5100 Windows STAs (and maybe
others as well).

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2800lib.c   | 3 +++
 drivers/net/wireless/rt2x00/rt2x00dev.c   | 6 +++++-
 drivers/net/wireless/rt2x00/rt2x00queue.h | 1 +
 3 files changed, 9 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless/rt2x00')

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 59302faec395..769c05c0cbaa 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -687,6 +687,9 @@ void rt2800_txdone_entry(struct queue_entry *entry, u32 status)
 		mcs = real_mcs;
 	}
 
+	if (aggr == 1 || ampdu == 1)
+		__set_bit(TXDONE_AMPDU, &txdesc.flags);
+
 	/*
 	 * Ralink has a retry mechanism using a global fallback
 	 * table. We setup this fallback table to try the immediate
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index a98c43485239..83252d94c2b7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -353,10 +353,14 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	 * which would allow the rc algorithm to better decide on
 	 * which rates are suitable.
 	 */
-	if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
+	if (test_bit(TXDONE_AMPDU, &txdesc->flags) ||
+	    tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
 		tx_info->flags |= IEEE80211_TX_STAT_AMPDU;
 		tx_info->status.ampdu_len = 1;
 		tx_info->status.ampdu_ack_len = success ? 1 : 0;
+
+		if (!success)
+			tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
 	}
 
 	if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 0c8b0c699679..6ae820093997 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -217,6 +217,7 @@ enum txdone_entry_desc_flags {
 	TXDONE_FALLBACK,
 	TXDONE_FAILURE,
 	TXDONE_EXCESSIVE_RETRY,
+	TXDONE_AMPDU,
 };
 
 /**
-- 
cgit v1.2.3


From 6a4c499e86f54ed9316a87e7ddc6b7d33adb4976 Mon Sep 17 00:00:00 2001
From: Helmut Schaa <helmut.schaa@googlemail.com>
Date: Mon, 28 Mar 2011 13:35:51 +0200
Subject: rt2x00: Add an error message when trying to send on a full queue

We already tell mac80211 to stop the queue when we hit a certain
threshold. Hence, it shouldn't happen at all that a frame gets queued
for tx on a full queue. Add an error message for this case.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00queue.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless/rt2x00')

diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 5d8925991ffb..9fc4a1ec4b43 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -482,8 +482,11 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
 	struct skb_frame_desc *skbdesc;
 	u8 rate_idx, rate_flags;
 
-	if (unlikely(rt2x00queue_full(queue)))
+	if (unlikely(rt2x00queue_full(queue))) {
+		ERROR(queue->rt2x00dev,
+		      "Dropping frame due to full tx queue %d.\n", queue->qid);
 		return -ENOBUFS;
+	}
 
 	if (unlikely(test_and_set_bit(ENTRY_OWNER_DEVICE_DATA,
 				      &entry->flags))) {
-- 
cgit v1.2.3


From 08b8099c128d601fd675b212ef8b10397706b633 Mon Sep 17 00:00:00 2001
From: Xose Vazquez Perez <xose.vazquez@gmail.com>
Date: Sun, 27 Mar 2011 01:15:53 +0100
Subject: wireless: rt2x00: rt{2500,73}usb.c fix duplicate ids

based on the Ralink drivers:

W = Windows_ralink_driver
L = Linux_ralink_driver

USB_IDs         W_73  W_2500 L_73  L_2500
=============   ====  ====== ====  ======
0x050d,0x7050   -     -      -     YES
0x050d,0x705a   -     -      YES   -
0x1371,0x9022   -     YES    YES   -
0x148f,0x2573   YES   -      YES   -

Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2500usb.c | 4 ----
 drivers/net/wireless/rt2x00/rt73usb.c   | 1 -
 2 files changed, 5 deletions(-)

(limited to 'drivers/net/wireless/rt2x00')

diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index d9e6cec56cb5..eac788160f55 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1909,13 +1909,10 @@ static struct usb_device_id rt2500usb_device_table[] = {
 	/* Belkin */
 	{ USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt2500usb_ops) },
 	{ USB_DEVICE(0x050d, 0x7051), USB_DEVICE_DATA(&rt2500usb_ops) },
-	{ USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* Cisco Systems */
 	{ USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) },
 	{ USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) },
 	{ USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) },
-	/* CNet */
-	{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* Conceptronic */
 	{ USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* D-LINK */
@@ -1938,7 +1935,6 @@ static struct usb_device_id rt2500usb_device_table[] = {
 	/* Ralink */
 	{ USB_DEVICE(0x148f, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) },
 	{ USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) },
-	{ USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) },
 	{ USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* Sagem */
 	{ USB_DEVICE(0x079b, 0x004b), USB_DEVICE_DATA(&rt2500usb_ops) },
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 149e4f928325..6593059f9c7e 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2406,7 +2406,6 @@ static struct usb_device_id rt73usb_device_table[] = {
 	{ USB_DEVICE(0x0b05, 0x1723), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0b05, 0x1724), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Belkin */
-	{ USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x050d, 0x905b), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x050d, 0x905c), USB_DEVICE_DATA(&rt73usb_ops) },
-- 
cgit v1.2.3


From cebb28ba1ebb00edee4606547d81acf8db0f0532 Mon Sep 17 00:00:00 2001
From: Michal Marek <mmarek@suse.cz>
Date: Tue, 5 Apr 2011 16:59:06 +0200
Subject: rt2x00: Drop __TIME__ usage

The kernel already prints its build timestamp during boot, no need to
repeat it in random drivers and produce different object files each
time.

Signed-off-by: Michal Marek <mmarek@suse.cz>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00debug.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net/wireless/rt2x00')

diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
index c92db3264741..66166ef037f5 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -568,7 +568,6 @@ static struct dentry *rt2x00debug_create_file_driver(const char *name,
 	blob->data = data;
 	data += sprintf(data, "driver:\t%s\n", intf->rt2x00dev->ops->name);
 	data += sprintf(data, "version:\t%s\n", DRV_VERSION);
-	data += sprintf(data, "compiled:\t%s %s\n", __DATE__, __TIME__);
 	blob->size = strlen(blob->data);
 
 	return debugfs_create_blob(name, S_IRUSR, intf->driver_folder, blob);
-- 
cgit v1.2.3