From e9f9530bb697f53dd620df290102359a3325bb23 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Tue, 20 Sep 2011 16:23:51 +0530 Subject: ath9k_hw: Fix Rx DMA stuck for AR9003 chips During the endurance testing, rx frames are not getting DMAd from MAC whereas pcu rx frame counters are getting updated properly. As per systems team input updated the initval to fix rx dma stuck issue. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h index 2339728a7306..3e69c631ebb4 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h @@ -1514,7 +1514,7 @@ static const u32 ar9300_2p2_mac_core[][2] = { {0x00008258, 0x00000000}, {0x0000825c, 0x40000000}, {0x00008260, 0x00080922}, - {0x00008264, 0x9bc00010}, + {0x00008264, 0x9d400010}, {0x00008268, 0xffffffff}, {0x0000826c, 0x0000ffff}, {0x00008270, 0x00000000}, -- cgit v1.2.3 From 2e2a41d6ca07d1b2aa67015c35fd80701c98e867 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 20 Sep 2011 16:46:36 +0200 Subject: iwlegacy: fix command queue timeout iwlegacy version of fix: commit 282cdb325aea4ebbc42ce753b47cc96145eb54bc Author: Johannes Berg Date: Mon Sep 12 12:09:10 2011 -0700 iwlagn: fix command queue timeout If the command queue is constantly busy, which can happen in P2P, the hangcheck timer will frequently find a command in it and will eventually reset the device because nothing sets the timestamp for this queue when commands are processed. Fix this by setting the timestamp when a command completes. iwlegacy does not support P2P, but this patch fix possible unneeded hardware resets, hence is needed. Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/iwl-tx.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/iwlegacy/iwl-tx.c b/drivers/net/wireless/iwlegacy/iwl-tx.c index 4fff995c6f3e..4b4489f746a0 100644 --- a/drivers/net/wireless/iwlegacy/iwl-tx.c +++ b/drivers/net/wireless/iwlegacy/iwl-tx.c @@ -625,6 +625,8 @@ iwl_legacy_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) cmd = txq->cmd[cmd_index]; meta = &txq->meta[cmd_index]; + txq->time_stamp = jiffies; + pci_unmap_single(priv->pci_dev, dma_unmap_addr(meta, mapping), dma_unmap_len(meta, len), -- cgit v1.2.3 From 65d0f19e583e80e42b1c67c166bfc4dfdf6ab693 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 20 Sep 2011 16:49:03 +0200 Subject: iwlegacy: do not use interruptible waits iwlegacy version of fix: commit effd4d9aece9184f526e6556786a94d335e38b71 Author: Johannes Berg Date: Thu Sep 15 11:46:52 2011 -0700 iwlagn: do not use interruptible waits Since the dawn of its time, iwlwifi has used interruptible waits to wait for synchronous commands and firmware loading. This leads to "interesting" bugs, because it can't actually handle the interruptions; for example when a command sending is interrupted it will assume the command completed fully, and then leave it pending, which leads to all kinds of trouble when the command finishes later. Since there's no easy way to gracefully deal with interruptions, fix the driver to not use interruptible waits. This at least fixes the error iwlagn 0000:02:00.0: Error: Response NULL in 'REPLY_SCAN_ABORT_CMD' I have seen in P2P testing, but it is likely that there are other errors caused by this. Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/iwl-core.c | 4 ++-- drivers/net/wireless/iwlegacy/iwl-hcmd.c | 2 +- drivers/net/wireless/iwlegacy/iwl-tx.c | 2 +- drivers/net/wireless/iwlegacy/iwl3945-base.c | 8 ++++---- drivers/net/wireless/iwlegacy/iwl4965-base.c | 10 +++++----- 5 files changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/iwlegacy/iwl-core.c b/drivers/net/wireless/iwlegacy/iwl-core.c index 35cd2537e7fd..e5971fe9d169 100644 --- a/drivers/net/wireless/iwlegacy/iwl-core.c +++ b/drivers/net/wireless/iwlegacy/iwl-core.c @@ -937,7 +937,7 @@ void iwl_legacy_irq_handle_error(struct iwl_priv *priv) &priv->contexts[IWL_RXON_CTX_BSS]); #endif - wake_up_interruptible(&priv->wait_command_queue); + wake_up(&priv->wait_command_queue); /* Keep the restart process from trying to send host * commands by clearing the INIT status bit */ @@ -1746,7 +1746,7 @@ int iwl_legacy_force_reset(struct iwl_priv *priv, bool external) /* Set the FW error flag -- cleared on iwl_down */ set_bit(STATUS_FW_ERROR, &priv->status); - wake_up_interruptible(&priv->wait_command_queue); + wake_up(&priv->wait_command_queue); /* * Keep the restart process from trying to send host * commands by clearing the INIT status bit diff --git a/drivers/net/wireless/iwlegacy/iwl-hcmd.c b/drivers/net/wireless/iwlegacy/iwl-hcmd.c index 62b4b09122cb..ce1fc9feb61f 100644 --- a/drivers/net/wireless/iwlegacy/iwl-hcmd.c +++ b/drivers/net/wireless/iwlegacy/iwl-hcmd.c @@ -167,7 +167,7 @@ int iwl_legacy_send_cmd_sync(struct iwl_priv *priv, struct iwl_host_cmd *cmd) goto out; } - ret = wait_event_interruptible_timeout(priv->wait_command_queue, + ret = wait_event_timeout(priv->wait_command_queue, !test_bit(STATUS_HCMD_ACTIVE, &priv->status), HOST_COMPLETE_TIMEOUT); if (!ret) { diff --git a/drivers/net/wireless/iwlegacy/iwl-tx.c b/drivers/net/wireless/iwlegacy/iwl-tx.c index 4b4489f746a0..ef9e268bf8a0 100644 --- a/drivers/net/wireless/iwlegacy/iwl-tx.c +++ b/drivers/net/wireless/iwlegacy/iwl-tx.c @@ -647,7 +647,7 @@ iwl_legacy_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) clear_bit(STATUS_HCMD_ACTIVE, &priv->status); IWL_DEBUG_INFO(priv, "Clearing HCMD_ACTIVE for command %s\n", iwl_legacy_get_cmd_string(cmd->hdr.cmd)); - wake_up_interruptible(&priv->wait_command_queue); + wake_up(&priv->wait_command_queue); } /* Mark as unmapped */ diff --git a/drivers/net/wireless/iwlegacy/iwl3945-base.c b/drivers/net/wireless/iwlegacy/iwl3945-base.c index 795826a014ed..66ee15629a76 100644 --- a/drivers/net/wireless/iwlegacy/iwl3945-base.c +++ b/drivers/net/wireless/iwlegacy/iwl3945-base.c @@ -841,7 +841,7 @@ static void iwl3945_rx_card_state_notif(struct iwl_priv *priv, wiphy_rfkill_set_hw_state(priv->hw->wiphy, test_bit(STATUS_RF_KILL_HW, &priv->status)); else - wake_up_interruptible(&priv->wait_command_queue); + wake_up(&priv->wait_command_queue); } /** @@ -2269,7 +2269,7 @@ static void iwl3945_alive_start(struct iwl_priv *priv) iwl3945_reg_txpower_periodic(priv); IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n"); - wake_up_interruptible(&priv->wait_command_queue); + wake_up(&priv->wait_command_queue); return; @@ -2300,7 +2300,7 @@ static void __iwl3945_down(struct iwl_priv *priv) iwl_legacy_clear_driver_stations(priv); /* Unblock any waiting calls */ - wake_up_interruptible_all(&priv->wait_command_queue); + wake_up_all(&priv->wait_command_queue); /* Wipe out the EXIT_PENDING status bit if we are not actually * exiting the module */ @@ -2853,7 +2853,7 @@ static int iwl3945_mac_start(struct ieee80211_hw *hw) /* Wait for START_ALIVE from ucode. Otherwise callbacks from * mac80211 will not be run successfully. */ - ret = wait_event_interruptible_timeout(priv->wait_command_queue, + ret = wait_event_timeout(priv->wait_command_queue, test_bit(STATUS_READY, &priv->status), UCODE_READY_TIMEOUT); if (!ret) { diff --git a/drivers/net/wireless/iwlegacy/iwl4965-base.c b/drivers/net/wireless/iwlegacy/iwl4965-base.c index 14334668034e..aa0c2539761e 100644 --- a/drivers/net/wireless/iwlegacy/iwl4965-base.c +++ b/drivers/net/wireless/iwlegacy/iwl4965-base.c @@ -576,7 +576,7 @@ static void iwl4965_rx_card_state_notif(struct iwl_priv *priv, wiphy_rfkill_set_hw_state(priv->hw->wiphy, test_bit(STATUS_RF_KILL_HW, &priv->status)); else - wake_up_interruptible(&priv->wait_command_queue); + wake_up(&priv->wait_command_queue); } /** @@ -926,7 +926,7 @@ static void iwl4965_irq_tasklet(struct iwl_priv *priv) handled |= CSR_INT_BIT_FH_TX; /* Wake up uCode load routine, now that load is complete */ priv->ucode_write_complete = 1; - wake_up_interruptible(&priv->wait_command_queue); + wake_up(&priv->wait_command_queue); } if (inta & ~handled) { @@ -1795,7 +1795,7 @@ static void iwl4965_alive_start(struct iwl_priv *priv) iwl4965_rf_kill_ct_config(priv); IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n"); - wake_up_interruptible(&priv->wait_command_queue); + wake_up(&priv->wait_command_queue); iwl_legacy_power_update_mode(priv, true); IWL_DEBUG_INFO(priv, "Updated power mode\n"); @@ -1828,7 +1828,7 @@ static void __iwl4965_down(struct iwl_priv *priv) iwl_legacy_clear_driver_stations(priv); /* Unblock any waiting calls */ - wake_up_interruptible_all(&priv->wait_command_queue); + wake_up_all(&priv->wait_command_queue); /* Wipe out the EXIT_PENDING status bit if we are not actually * exiting the module */ @@ -2266,7 +2266,7 @@ int iwl4965_mac_start(struct ieee80211_hw *hw) /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from * mac80211 will not be run successfully. */ - ret = wait_event_interruptible_timeout(priv->wait_command_queue, + ret = wait_event_timeout(priv->wait_command_queue, test_bit(STATUS_READY, &priv->status), UCODE_READY_TIMEOUT); if (!ret) { -- cgit v1.2.3 From 6c80c39d9a6986a566c30d797aae37bfb697eea3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 22 Sep 2011 14:59:04 -0700 Subject: iwlagn: fix dangling scan request If iwl_scan_initiate() fails for any reason, priv->scan_request and priv->scan_vif are left dangling. This can lead to a crash later when iwl_bg_scan_completed() tries to run a pending scan request. In practice, this seems to be very rare due to the STATUS_SCANNING check earlier. That check, however, is wrong -- it should allow a scan to be queued when a reset/roc scan is going on. When a normal scan is already going on, a new one can't be issued by mac80211, so that code can be removed completely. I introduced this bug when adding off-channel support in commit 266af4c745952e9bebf687dd68af58df553cb59d. Cc: stable@kernel.org [3.0] Reported-by: Peng Yan Signed-off-by: Johannes Berg Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-scan.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index dd6937e97055..77e528f5db88 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -405,31 +405,33 @@ int iwl_mac_hw_scan(struct ieee80211_hw *hw, mutex_lock(&priv->mutex); - if (test_bit(STATUS_SCANNING, &priv->status) && - priv->scan_type != IWL_SCAN_NORMAL) { - IWL_DEBUG_SCAN(priv, "Scan already in progress.\n"); - ret = -EAGAIN; - goto out_unlock; - } - - /* mac80211 will only ask for one band at a time */ - priv->scan_request = req; - priv->scan_vif = vif; - /* * If an internal scan is in progress, just set * up the scan_request as per above. */ if (priv->scan_type != IWL_SCAN_NORMAL) { - IWL_DEBUG_SCAN(priv, "SCAN request during internal scan\n"); + IWL_DEBUG_SCAN(priv, + "SCAN request during internal scan - defer\n"); + priv->scan_request = req; + priv->scan_vif = vif; ret = 0; - } else + } else { + priv->scan_request = req; + priv->scan_vif = vif; + /* + * mac80211 will only ask for one band at a time + * so using channels[0] here is ok + */ ret = iwl_scan_initiate(priv, vif, IWL_SCAN_NORMAL, req->channels[0]->band); + if (ret) { + priv->scan_request = NULL; + priv->scan_vif = NULL; + } + } IWL_DEBUG_MAC80211(priv, "leave\n"); -out_unlock: mutex_unlock(&priv->mutex); return ret; -- cgit v1.2.3 From 831d85471e761e190c3c8979b37540d699ae5812 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 22 Sep 2011 22:59:02 -0500 Subject: rtlwifi: rtl8192cu: Fix unitialized struct Driver rtl8192cu assigns a new struct rtl_tcb_desc object, but fails to clear it. Signed-off-by: Larry Finger Cc: Stable [2.6.39+] Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/usb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index 8b1cef0ffde6..4bf3cf457ef0 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -863,6 +863,7 @@ static void _rtl_usb_tx_preprocess(struct ieee80211_hw *hw, struct sk_buff *skb, u8 tid = 0; u16 seq_number = 0; + memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc)); if (ieee80211_is_auth(fc)) { RT_TRACE(rtlpriv, COMP_SEND, DBG_DMESG, ("MAC80211_LINKING\n")); rtl_ips_nic_on(hw); -- cgit v1.2.3 From ba54238552625aad2d75f455a4d3db18ea7dec68 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 23 Sep 2011 14:33:14 +0530 Subject: ath9k: Fix a dma warning/memory leak proper dma_unmapping and freeing of skb's has to be done in the rx cleanup for EDMA chipsets when the device is unloaded and this also seems to address the following warning which shows up occasionally when the device is unloaded Call Trace: [] warn_slowpath_common+0x72/0xa0 [] ? dma_debug_device_change+0x19c/0x200 [] ? dma_debug_device_change+0x19c/0x200 [] warn_slowpath_fmt+0x33/0x40 [] dma_debug_device_change+0x19c/0x200 [] notifier_call_chain+0x82/0xb0 [] __blocking_notifier_call_chain+0x60/0x90 [] blocking_notifier_call_chain+0x1f/0x30 [] __device_release_driver+0xa4/0xc0 [] driver_detach+0x97/0xa0 [] bus_remove_driver+0x6c/0xe0 [] ? sysfs_addrm_finish+0x4b/0x60 [] driver_unregister+0x49/0x80 [] ? sysfs_remove_file+0x14/0x20 [] pci_unregister_driver+0x32/0x80 [] ath_pci_exit+0x12/0x20 [ath9k] [] ath9k_exit+0x17/0x36 [ath9k] [] ? mutex_unlock+0xd/0x10 [] sys_delete_module+0x13f/0x200 [] ? sys_munmap+0x4b/0x60 [] ? restore_all+0xf/0xf [] ? spurious_fault+0xe0/0xe0 [] ? trace_hardirqs_on_caller+0xf4/0x180 [] sysenter_do_call+0x12/0x38 ---[ end trace 16e1c1521c06bcf9 ]--- Mapped at: [] debug_dma_map_page+0x48/0x120 [] ath_rx_init+0x3f8/0x4b0 [ath9k] [] ath9k_init_device+0x4c4/0x7b0 [ath9k] [] ath_pci_probe+0x263/0x330 [ath9k] Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 9a4850154fb2..4c21f8cbdeb5 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -205,14 +205,22 @@ static void ath_rx_remove_buffer(struct ath_softc *sc, static void ath_rx_edma_cleanup(struct ath_softc *sc) { + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); struct ath_buf *bf; ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_LP); ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_HP); list_for_each_entry(bf, &sc->rx.rxbuf, list) { - if (bf->bf_mpdu) + if (bf->bf_mpdu) { + dma_unmap_single(sc->dev, bf->bf_buf_addr, + common->rx_bufsize, + DMA_BIDIRECTIONAL); dev_kfree_skb_any(bf->bf_mpdu); + bf->bf_buf_addr = 0; + bf->bf_mpdu = NULL; + } } INIT_LIST_HEAD(&sc->rx.rxbuf); -- cgit v1.2.3