From 7fd25e6fc035f4b04b75bca6d7e8daa069603a76 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 19 Sep 2019 14:12:34 +0200 Subject: ieee802154: atusb: fix use-after-free at disconnect The disconnect callback was accessing the hardware-descriptor private data after having having freed it. Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver") Cc: stable # 4.2 Cc: Alexander Aring Reported-by: syzbot+f4509a9138a1472e7e80@syzkaller.appspotmail.com Signed-off-by: Johan Hovold Signed-off-by: Stefan Schmidt --- drivers/net/ieee802154/atusb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c index ceddb424f887..0dd0ba915ab9 100644 --- a/drivers/net/ieee802154/atusb.c +++ b/drivers/net/ieee802154/atusb.c @@ -1137,10 +1137,11 @@ static void atusb_disconnect(struct usb_interface *interface) ieee802154_unregister_hw(atusb->hw); + usb_put_dev(atusb->usb_dev); + ieee802154_free_hw(atusb->hw); usb_set_intfdata(interface, NULL); - usb_put_dev(atusb->usb_dev); pr_debug("%s done\n", __func__); } -- cgit v1.2.3 From 21a045e430e56725628f361dede8a882e92469b9 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Fri, 20 Sep 2019 21:45:33 +0200 Subject: ieee802154: mcr20a: simplify a bit 'mcr20a_handle_rx_read_buf_complete()' Use a 'skb_put_data()' variant instead of rewritting it. The __skb_put_data variant is safe here. It is obvious that the skb can not overflow. It has just been allocated a few lines above with the same 'len'. Signed-off-by: Christophe JAILLET Acked-by: Xue Liu Signed-off-by: Stefan Schmidt --- drivers/net/ieee802154/mcr20a.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ieee802154/mcr20a.c b/drivers/net/ieee802154/mcr20a.c index 17f2300e63ee..8dc04e2590b1 100644 --- a/drivers/net/ieee802154/mcr20a.c +++ b/drivers/net/ieee802154/mcr20a.c @@ -800,7 +800,7 @@ mcr20a_handle_rx_read_buf_complete(void *context) if (!skb) return; - memcpy(skb_put(skb, len), lp->rx_buf, len); + __skb_put_data(skb, lp->rx_buf, len); ieee802154_rx_irqsafe(lp->hw, skb, lp->rx_lqi[0]); print_hex_dump_debug("mcr20a rx: ", DUMP_PREFIX_OFFSET, 16, 1, -- cgit v1.2.3 From 6402939ec86eaf226c8b8ae00ed983936b164908 Mon Sep 17 00:00:00 2001 From: Navid Emamdoost Date: Tue, 17 Sep 2019 17:47:12 -0500 Subject: ieee802154: ca8210: prevent memory leak In ca8210_probe the allocated pdata needs to be assigned to spi_device->dev.platform_data before calling ca8210_get_platform_data. Othrwise when ca8210_get_platform_data fails pdata cannot be released. Signed-off-by: Navid Emamdoost Link: https://lore.kernel.org/r/20190917224713.26371-1-navid.emamdoost@gmail.com Signed-off-by: Stefan Schmidt --- drivers/net/ieee802154/ca8210.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ieee802154/ca8210.c b/drivers/net/ieee802154/ca8210.c index b188fce3f641..658b399ac9ea 100644 --- a/drivers/net/ieee802154/ca8210.c +++ b/drivers/net/ieee802154/ca8210.c @@ -3152,12 +3152,12 @@ static int ca8210_probe(struct spi_device *spi_device) goto error; } + priv->spi->dev.platform_data = pdata; ret = ca8210_get_platform_data(priv->spi, pdata); if (ret) { dev_crit(&spi_device->dev, "ca8210_get_platform_data failed\n"); goto error; } - priv->spi->dev.platform_data = pdata; ret = ca8210_dev_com_init(priv); if (ret) { -- cgit v1.2.3 From 7ae6d93c8f052b7a77ba56ed0f654e22a2876739 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michal=20Vok=C3=A1=C4=8D?= Date: Thu, 26 Sep 2019 10:59:17 +0200 Subject: net: dsa: qca8k: Use up to 7 ports for all operations MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The QCA8K family supports up to 7 ports. So use the existing QCA8K_NUM_PORTS define to allocate the switch structure and limit all operations with the switch ports. This was not an issue until commit 0394a63acfe2 ("net: dsa: enable and disable all ports") disabled all unused ports. Since the unused ports 7-11 are outside of the correct register range on this switch some registers were rewritten with invalid content. Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family") Fixes: a0c02161ecfc ("net: dsa: variable number of ports") Fixes: 0394a63acfe2 ("net: dsa: enable and disable all ports") Signed-off-by: Michal Vokáč Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/qca8k.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c index 684aa51684db..b00274caae4f 100644 --- a/drivers/net/dsa/qca8k.c +++ b/drivers/net/dsa/qca8k.c @@ -705,7 +705,7 @@ qca8k_setup(struct dsa_switch *ds) BIT(0) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S); /* Setup connection between CPU port & user ports */ - for (i = 0; i < DSA_MAX_PORTS; i++) { + for (i = 0; i < QCA8K_NUM_PORTS; i++) { /* CPU port gets connected to all user ports of the switch */ if (dsa_is_cpu_port(ds, i)) { qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT), @@ -1077,7 +1077,7 @@ qca8k_sw_probe(struct mdio_device *mdiodev) if (id != QCA8K_ID_QCA8337) return -ENODEV; - priv->ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS); + priv->ds = dsa_switch_alloc(&mdiodev->dev, QCA8K_NUM_PORTS); if (!priv->ds) return -ENOMEM; -- cgit v1.2.3 From b6f2494d311a19b33b19708543e7ef6dea1de459 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Sun, 29 Sep 2019 01:08:17 +0300 Subject: net: dsa: sja1105: Ensure PTP time for rxtstamp reconstruction is not in the past Sometimes the PTP synchronization on the switch 'jumps': ptp4l[11241.155]: rms 8 max 16 freq -21732 +/- 11 delay 742 +/- 0 ptp4l[11243.157]: rms 7 max 17 freq -21731 +/- 10 delay 744 +/- 0 ptp4l[11245.160]: rms 33592410 max 134217731 freq +192422 +/- 8530253 delay 743 +/- 0 ptp4l[11247.163]: rms 811631 max 964131 freq +10326 +/- 557785 delay 743 +/- 0 ptp4l[11249.166]: rms 261936 max 533876 freq -304323 +/- 126371 delay 744 +/- 0 ptp4l[11251.169]: rms 48700 max 57740 freq -20218 +/- 30532 delay 744 +/- 0 ptp4l[11253.171]: rms 14570 max 30163 freq -5568 +/- 7563 delay 742 +/- 0 ptp4l[11255.174]: rms 2914 max 3440 freq -22001 +/- 1667 delay 744 +/- 1 ptp4l[11257.177]: rms 811 max 1710 freq -22653 +/- 451 delay 744 +/- 1 ptp4l[11259.180]: rms 177 max 218 freq -21695 +/- 89 delay 741 +/- 0 ptp4l[11261.182]: rms 45 max 92 freq -21677 +/- 32 delay 742 +/- 0 ptp4l[11263.186]: rms 14 max 32 freq -21733 +/- 11 delay 742 +/- 0 ptp4l[11265.188]: rms 9 max 14 freq -21725 +/- 12 delay 742 +/- 0 ptp4l[11267.191]: rms 9 max 16 freq -21727 +/- 13 delay 742 +/- 0 ptp4l[11269.194]: rms 6 max 15 freq -21726 +/- 9 delay 743 +/- 0 ptp4l[11271.197]: rms 8 max 15 freq -21728 +/- 11 delay 743 +/- 0 ptp4l[11273.200]: rms 6 max 12 freq -21727 +/- 8 delay 743 +/- 0 ptp4l[11275.202]: rms 9 max 17 freq -21720 +/- 11 delay 742 +/- 0 ptp4l[11277.205]: rms 9 max 18 freq -21725 +/- 12 delay 742 +/- 0 Background: the switch only offers partial RX timestamps (24 bits) and it is up to the driver to read the PTP clock to fill those timestamps up to 64 bits. But the PTP clock readout needs to happen quickly enough (in 0.135 seconds, in fact), otherwise the PTP clock will wrap around 24 bits, condition which cannot be detected. Looking at the 'max 134217731' value on output line 3, one can see that in hex it is 0x8000003. Because the PTP clock resolution is 8 ns, that means 0x1000000 in ticks, which is exactly 2^24. So indeed this is a PTP clock wraparound, but the reason might be surprising. What is going on is that sja1105_tstamp_reconstruct(priv, now, ts) expects a "now" time that is later than the "ts" was snapshotted at. This, of course, is obvious: we read the PTP time _after_ the partial RX timestamp was received. However, the workqueue is processing frames from a skb queue and reuses the same PTP time, read once at the beginning. Normally the skb queue only contains one frame and all goes well. But when the skb queue contains two frames, the second frame that gets dequeued might have been partially timestamped by the RX MAC _after_ we had read our PTP time initially. The code was originally like that due to concerns that SPI access for PTP time readout is a slow process, and we are time-constrained anyway (aka: premature optimization). But some timing analysis reveals that the time spent until the RX timestamp is completely reconstructed is 1 order of magnitude lower than the 0.135 s deadline even under worst-case conditions. So we can afford to read the PTP time for each frame in the RX timestamping queue, which of course ensures that the full PTP time is in the partial timestamp's future. Fixes: f3097be21bf1 ("net: dsa: sja1105: Add a state machine for RX timestamping") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index b9def744bcb3..f3d38ff144c4 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -2005,12 +2005,12 @@ static void sja1105_rxtstamp_work(struct work_struct *work) mutex_lock(&priv->ptp_lock); - now = priv->tstamp_cc.read(&priv->tstamp_cc); - while ((skb = skb_dequeue(&data->skb_rxtstamp_queue)) != NULL) { struct skb_shared_hwtstamps *shwt = skb_hwtstamps(skb); u64 ts; + now = priv->tstamp_cc.read(&priv->tstamp_cc); + *shwt = (struct skb_shared_hwtstamps) {0}; ts = SJA1105_SKB_CB(skb)->meta_tstamp; -- cgit v1.2.3 From 68501df92d116b760777a2cfda314789f926476f Mon Sep 17 00:00:00 2001 From: Navid Emamdoost Date: Sun, 29 Sep 2019 01:43:39 +0300 Subject: net: dsa: sja1105: Prevent leaking memory In sja1105_static_config_upload, in two cases memory is leaked: when static_config_buf_prepare_for_upload fails and when sja1105_inhibit_tx fails. In both cases config_buf should be released. Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Fixes: 1a4c69406cc1 ("net: dsa: sja1105: Prevent PHY jabbering during switch reset") Signed-off-by: Navid Emamdoost Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105_spi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/sja1105/sja1105_spi.c b/drivers/net/dsa/sja1105/sja1105_spi.c index 84dc603138cf..58dd37ecde17 100644 --- a/drivers/net/dsa/sja1105/sja1105_spi.c +++ b/drivers/net/dsa/sja1105/sja1105_spi.c @@ -409,7 +409,8 @@ int sja1105_static_config_upload(struct sja1105_private *priv) rc = static_config_buf_prepare_for_upload(priv, config_buf, buf_len); if (rc < 0) { dev_err(dev, "Invalid config, cannot upload\n"); - return -EINVAL; + rc = -EINVAL; + goto out; } /* Prevent PHY jabbering during switch reset by inhibiting * Tx on all ports and waiting for current packet to drain. @@ -418,7 +419,8 @@ int sja1105_static_config_upload(struct sja1105_private *priv) rc = sja1105_inhibit_tx(priv, port_bitmap, true); if (rc < 0) { dev_err(dev, "Failed to inhibit Tx on ports\n"); - return -ENXIO; + rc = -ENXIO; + goto out; } /* Wait for an eventual egress packet to finish transmission * (reach IFG). It is guaranteed that a second one will not -- cgit v1.2.3 From 55131dec2b1c7417d216f861ea7a29dc7c4d2d20 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Tue, 1 Oct 2019 10:33:51 +0200 Subject: net: socionext: netsec: always grab descriptor lock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Always acquire tx descriptor spinlock even if a xdp program is not loaded on the netsec device since ndo_xdp_xmit can run concurrently with netsec_netdev_start_xmit and netsec_clean_tx_dring. This can happen loading a xdp program on a different device (e.g virtio-net) and xdp_do_redirect_map/xdp_do_redirect_slow can redirect to netsec even if we do not have a xdp program on it. Fixes: ba2b232108d3 ("net: netsec: add XDP support") Tested-by: Ilias Apalodimas Signed-off-by: Lorenzo Bianconi Reviewed-by: Ilias Apalodimas Acked-by: Toke Høiland-Jørgensen Signed-off-by: David S. Miller --- drivers/net/ethernet/socionext/netsec.c | 30 +++++++----------------------- 1 file changed, 7 insertions(+), 23 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c index 55db7fbd43cc..f9e6744d8fd6 100644 --- a/drivers/net/ethernet/socionext/netsec.c +++ b/drivers/net/ethernet/socionext/netsec.c @@ -282,7 +282,6 @@ struct netsec_desc_ring { void *vaddr; u16 head, tail; u16 xdp_xmit; /* netsec_xdp_xmit packets */ - bool is_xdp; struct page_pool *page_pool; struct xdp_rxq_info xdp_rxq; spinlock_t lock; /* XDP tx queue locking */ @@ -634,8 +633,7 @@ static bool netsec_clean_tx_dring(struct netsec_priv *priv) unsigned int bytes; int cnt = 0; - if (dring->is_xdp) - spin_lock(&dring->lock); + spin_lock(&dring->lock); bytes = 0; entry = dring->vaddr + DESC_SZ * tail; @@ -682,8 +680,8 @@ next: entry = dring->vaddr + DESC_SZ * tail; cnt++; } - if (dring->is_xdp) - spin_unlock(&dring->lock); + + spin_unlock(&dring->lock); if (!cnt) return false; @@ -799,9 +797,6 @@ static void netsec_set_tx_de(struct netsec_priv *priv, de->data_buf_addr_lw = lower_32_bits(desc->dma_addr); de->buf_len_info = (tx_ctrl->tcp_seg_len << 16) | desc->len; de->attr = attr; - /* under spin_lock if using XDP */ - if (!dring->is_xdp) - dma_wmb(); dring->desc[idx] = *desc; if (desc->buf_type == TYPE_NETSEC_SKB) @@ -1123,12 +1118,10 @@ static netdev_tx_t netsec_netdev_start_xmit(struct sk_buff *skb, u16 tso_seg_len = 0; int filled; - if (dring->is_xdp) - spin_lock_bh(&dring->lock); + spin_lock_bh(&dring->lock); filled = netsec_desc_used(dring); if (netsec_check_stop_tx(priv, filled)) { - if (dring->is_xdp) - spin_unlock_bh(&dring->lock); + spin_unlock_bh(&dring->lock); net_warn_ratelimited("%s %s Tx queue full\n", dev_name(priv->dev), ndev->name); return NETDEV_TX_BUSY; @@ -1161,8 +1154,7 @@ static netdev_tx_t netsec_netdev_start_xmit(struct sk_buff *skb, tx_desc.dma_addr = dma_map_single(priv->dev, skb->data, skb_headlen(skb), DMA_TO_DEVICE); if (dma_mapping_error(priv->dev, tx_desc.dma_addr)) { - if (dring->is_xdp) - spin_unlock_bh(&dring->lock); + spin_unlock_bh(&dring->lock); netif_err(priv, drv, priv->ndev, "%s: DMA mapping failed\n", __func__); ndev->stats.tx_dropped++; @@ -1177,8 +1169,7 @@ static netdev_tx_t netsec_netdev_start_xmit(struct sk_buff *skb, netdev_sent_queue(priv->ndev, skb->len); netsec_set_tx_de(priv, dring, &tx_ctrl, &tx_desc, skb); - if (dring->is_xdp) - spin_unlock_bh(&dring->lock); + spin_unlock_bh(&dring->lock); netsec_write(priv, NETSEC_REG_NRM_TX_PKTCNT, 1); /* submit another tx */ return NETDEV_TX_OK; @@ -1262,7 +1253,6 @@ err: static void netsec_setup_tx_dring(struct netsec_priv *priv) { struct netsec_desc_ring *dring = &priv->desc_ring[NETSEC_RING_TX]; - struct bpf_prog *xdp_prog = READ_ONCE(priv->xdp_prog); int i; for (i = 0; i < DESC_NUM; i++) { @@ -1275,12 +1265,6 @@ static void netsec_setup_tx_dring(struct netsec_priv *priv) */ de->attr = 1U << NETSEC_TX_SHIFT_OWN_FIELD; } - - if (xdp_prog) - dring->is_xdp = true; - else - dring->is_xdp = false; - } static int netsec_setup_rx_dring(struct netsec_priv *priv) -- cgit v1.2.3 From 6de6d18591b5781b7fdfb9d0ade0a4b5afacf882 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 1 Oct 2019 16:21:40 +0200 Subject: ionic: select CONFIG_NET_DEVLINK When no other driver selects the devlink library code, ionic produces a link failure: drivers/net/ethernet/pensando/ionic/ionic_devlink.o: In function `ionic_devlink_alloc': ionic_devlink.c:(.text+0xd): undefined reference to `devlink_alloc' drivers/net/ethernet/pensando/ionic/ionic_devlink.o: In function `ionic_devlink_register': ionic_devlink.c:(.text+0x71): undefined reference to `devlink_register' Add the same 'select' statement that the other drivers use here. Fixes: fbfb8031533c ("ionic: Add hardware init and device commands") Signed-off-by: Arnd Bergmann Acked-by: Shannon Nelson Signed-off-by: David S. Miller --- drivers/net/ethernet/pensando/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/pensando/Kconfig b/drivers/net/ethernet/pensando/Kconfig index bd0583e409df..d25b88f53de4 100644 --- a/drivers/net/ethernet/pensando/Kconfig +++ b/drivers/net/ethernet/pensando/Kconfig @@ -20,6 +20,7 @@ if NET_VENDOR_PENSANDO config IONIC tristate "Pensando Ethernet IONIC Support" depends on 64BIT && PCI + select NET_DEVLINK help This enables the support for the Pensando family of Ethernet adapters. More specific information on this driver can be -- cgit v1.2.3 From 895b5c9f206eb7d25dc1360a8ccfc5958895eb89 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Sun, 29 Sep 2019 20:54:03 +0200 Subject: netfilter: drop bridge nf reset from nf_reset commit 174e23810cd31 ("sk_buff: drop all skb extensions on free and skb scrubbing") made napi recycle always drop skb extensions. The additional skb_ext_del() that is performed via nf_reset on napi skb recycle is not needed anymore. Most nf_reset() calls in the stack are there so queued skb won't block 'rmmod nf_conntrack' indefinitely. This removes the skb_ext_del from nf_reset, and renames it to a more fitting nf_reset_ct(). In a few selected places, add a call to skb_ext_reset to make sure that no active extensions remain. I am submitting this for "net", because we're still early in the release cycle. The patch applies to net-next too, but I think the rename causes needless divergence between those trees. Suggested-by: Eric Dumazet Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- drivers/net/ppp/pptp.c | 4 ++-- drivers/net/tun.c | 2 +- drivers/net/virtio_net.c | 2 +- drivers/net/vrf.c | 8 ++++---- drivers/net/wireless/mac80211_hwsim.c | 4 ++-- 5 files changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ppp/pptp.c b/drivers/net/ppp/pptp.c index 734de7de03f7..e1fabb3e3246 100644 --- a/drivers/net/ppp/pptp.c +++ b/drivers/net/ppp/pptp.c @@ -238,7 +238,7 @@ static int pptp_xmit(struct ppp_channel *chan, struct sk_buff *skb) skb_dst_drop(skb); skb_dst_set(skb, &rt->dst); - nf_reset(skb); + nf_reset_ct(skb); skb->ip_summed = CHECKSUM_NONE; ip_select_ident(net, skb, NULL); @@ -358,7 +358,7 @@ static int pptp_rcv(struct sk_buff *skb) po = lookup_chan(htons(header->call_id), iph->saddr); if (po) { skb_dst_drop(skb); - nf_reset(skb); + nf_reset_ct(skb); return sk_receive_skb(sk_pppox(po), skb, 0); } drop: diff --git a/drivers/net/tun.c b/drivers/net/tun.c index aab0be40d443..812dc3a65efb 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1104,7 +1104,7 @@ static netdev_tx_t tun_net_xmit(struct sk_buff *skb, struct net_device *dev) */ skb_orphan(skb); - nf_reset(skb); + nf_reset_ct(skb); if (ptr_ring_produce(&tfile->tx_ring, skb)) goto drop; diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index ba98e0971b84..5a635f028bdc 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -1585,7 +1585,7 @@ static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev) /* Don't wait up for transmitted skbs to be freed. */ if (!use_napi) { skb_orphan(skb); - nf_reset(skb); + nf_reset_ct(skb); } /* If running out of space, stop queue to avoid getting packets that we diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index a4b38a980c3c..ee52bde058df 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -366,7 +366,7 @@ static int vrf_finish_output6(struct net *net, struct sock *sk, struct neighbour *neigh; int ret; - nf_reset(skb); + nf_reset_ct(skb); skb->protocol = htons(ETH_P_IPV6); skb->dev = dev; @@ -459,7 +459,7 @@ static struct sk_buff *vrf_ip6_out_direct(struct net_device *vrf_dev, /* reset skb device */ if (likely(err == 1)) - nf_reset(skb); + nf_reset_ct(skb); else skb = NULL; @@ -560,7 +560,7 @@ static int vrf_finish_output(struct net *net, struct sock *sk, struct sk_buff *s bool is_v6gw = false; int ret = -EINVAL; - nf_reset(skb); + nf_reset_ct(skb); /* Be paranoid, rather than too clever. */ if (unlikely(skb_headroom(skb) < hh_len && dev->header_ops)) { @@ -670,7 +670,7 @@ static struct sk_buff *vrf_ip_out_direct(struct net_device *vrf_dev, /* reset skb device */ if (likely(err == 1)) - nf_reset(skb); + nf_reset_ct(skb); else skb = NULL; diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 635956024e88..45c73a6f09a1 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -1261,8 +1261,8 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw, skb_orphan(skb); skb_dst_drop(skb); skb->mark = 0; - secpath_reset(skb); - nf_reset(skb); + skb_ext_reset(skb); + nf_reset_ct(skb); /* * Get absolute mactime here so all HWs RX at the "same time", and -- cgit v1.2.3 From d2c50b1cd94528aea8c8e9abb4cce81590f32cc4 Mon Sep 17 00:00:00 2001 From: Wen Yang Date: Sun, 29 Sep 2019 14:54:24 +0800 Subject: net: mscc: ocelot: add missing of_node_put after calling of_get_child_by_name of_node_put needs to be called when the device node which is got from of_get_child_by_name finished using. In both cases of success and failure, we need to release 'ports', so clean up the code using goto. fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Wen Yang Cc: Alexandre Belloni Cc: Microchip Linux Driver Support Cc: "David S. Miller" Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/ethernet/mscc/ocelot_board.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mscc/ocelot_board.c b/drivers/net/ethernet/mscc/ocelot_board.c index b063eb78fa0c..aac115136720 100644 --- a/drivers/net/ethernet/mscc/ocelot_board.c +++ b/drivers/net/ethernet/mscc/ocelot_board.c @@ -388,13 +388,14 @@ static int mscc_ocelot_probe(struct platform_device *pdev) continue; phy = of_phy_find_device(phy_node); + of_node_put(phy_node); if (!phy) continue; err = ocelot_probe_port(ocelot, port, regs, phy); if (err) { of_node_put(portnp); - return err; + goto out_put_ports; } phy_mode = of_get_phy_mode(portnp); @@ -422,7 +423,8 @@ static int mscc_ocelot_probe(struct platform_device *pdev) "invalid phy mode for port%d, (Q)SGMII only\n", port); of_node_put(portnp); - return -EINVAL; + err = -EINVAL; + goto out_put_ports; } serdes = devm_of_phy_get(ocelot->dev, portnp, NULL); @@ -435,7 +437,8 @@ static int mscc_ocelot_probe(struct platform_device *pdev) "missing SerDes phys for port%d\n", port); - goto err_probe_ports; + of_node_put(portnp); + goto out_put_ports; } ocelot->ports[port]->serdes = serdes; @@ -447,9 +450,8 @@ static int mscc_ocelot_probe(struct platform_device *pdev) dev_info(&pdev->dev, "Ocelot switch probed\n"); - return 0; - -err_probe_ports: +out_put_ports: + of_node_put(ports); return err; } -- cgit v1.2.3 From f32eb9d80470dab05df26b6efd02d653c72e6a11 Mon Sep 17 00:00:00 2001 From: Wen Yang Date: Sun, 29 Sep 2019 15:00:47 +0800 Subject: net: dsa: rtl8366rb: add missing of_node_put after calling of_get_child_by_name of_node_put needs to be called when the device node which is got from of_get_child_by_name finished using. irq_domain_add_linear() also calls of_node_get() to increase refcount, so irq_domain will not be affected when it is released. Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Wen Yang Cc: Linus Walleij Cc: Andrew Lunn Cc: Vivien Didelot Cc: Florian Fainelli Cc: "David S. Miller" Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Linus Walleij Signed-off-by: David S. Miller --- drivers/net/dsa/rtl8366rb.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c index a268085ffad2..f5cc8b0a7c74 100644 --- a/drivers/net/dsa/rtl8366rb.c +++ b/drivers/net/dsa/rtl8366rb.c @@ -507,7 +507,8 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi) irq = of_irq_get(intc, 0); if (irq <= 0) { dev_err(smi->dev, "failed to get parent IRQ\n"); - return irq ? irq : -EINVAL; + ret = irq ? irq : -EINVAL; + goto out_put_node; } /* This clears the IRQ status register */ @@ -515,7 +516,7 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi) &val); if (ret) { dev_err(smi->dev, "can't read interrupt status\n"); - return ret; + goto out_put_node; } /* Fetch IRQ edge information from the descriptor */ @@ -537,7 +538,7 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi) val); if (ret) { dev_err(smi->dev, "could not configure IRQ polarity\n"); - return ret; + goto out_put_node; } ret = devm_request_threaded_irq(smi->dev, irq, NULL, @@ -545,7 +546,7 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi) "RTL8366RB", smi); if (ret) { dev_err(smi->dev, "unable to request irq: %d\n", ret); - return ret; + goto out_put_node; } smi->irqdomain = irq_domain_add_linear(intc, RTL8366RB_NUM_INTERRUPT, @@ -553,12 +554,15 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi) smi); if (!smi->irqdomain) { dev_err(smi->dev, "failed to create IRQ domain\n"); - return -EINVAL; + ret = -EINVAL; + goto out_put_node; } for (i = 0; i < smi->num_ports; i++) irq_set_parent(irq_create_mapping(smi->irqdomain, i), irq); - return 0; +out_put_node: + of_node_put(intc); + return ret; } static int rtl8366rb_set_addr(struct realtek_smi *smi) -- cgit v1.2.3 From 9a2ae7b3960eb2426a8560cbc3251e3453230d21 Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Mon, 30 Sep 2019 10:19:05 +0200 Subject: net: stmmac: xgmac: Not all Unicast addresses may be available Some setups may not have all Unicast addresses filters available. Let's check this before trying to setup filters. Fixes: 0efedbf11f07 ("net: stmmac: xgmac: Fix XGMAC selftests") Signed-off-by: Jose Abreu Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c index 2b277b2c586b..6d8ac2ef4fc2 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c @@ -472,7 +472,7 @@ static void dwxgmac2_set_filter(struct mac_device_info *hw, dwxgmac2_set_mchash(ioaddr, mc_filter, mcbitslog2); /* Handle multiple unicast addresses */ - if (netdev_uc_count(dev) > XGMAC_ADDR_MAX) { + if (netdev_uc_count(dev) > hw->unicast_filter_entries) { value |= XGMAC_FILTER_PR; } else { struct netdev_hw_addr *ha; -- cgit v1.2.3 From c11986b9fa74cd3ce218e0ca7e0de88d30e6f497 Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Mon, 30 Sep 2019 10:19:06 +0200 Subject: net: stmmac: xgmac: Detect Hash Table size dinamically Since commit b8ef7020d6e5 ("net: stmmac: add support for hash table size 128/256 in dwmac4"), we can detect the Hash Table dinamically. Let's implement this feature in XGMAC cores and fix possible setups that don't support the maximum size for Hash Table. Signed-off-by: Jose Abreu Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h | 1 + drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h index 5923ca62d793..f7eb06f8fb37 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h @@ -122,6 +122,7 @@ #define XGMAC_HWFEAT_GMIISEL BIT(1) #define XGMAC_HW_FEATURE1 0x00000120 #define XGMAC_HWFEAT_L3L4FNUM GENMASK(30, 27) +#define XGMAC_HWFEAT_HASHTBLSZ GENMASK(25, 24) #define XGMAC_HWFEAT_RSSEN BIT(20) #define XGMAC_HWFEAT_TSOEN BIT(18) #define XGMAC_HWFEAT_SPHEN BIT(17) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c index 53c4a40d8386..965cbe3e6f51 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c @@ -380,6 +380,7 @@ static void dwxgmac2_get_hw_feature(void __iomem *ioaddr, /* MAC HW feature 1 */ hw_cap = readl(ioaddr + XGMAC_HW_FEATURE1); dma_cap->l3l4fnum = (hw_cap & XGMAC_HWFEAT_L3L4FNUM) >> 27; + dma_cap->hash_tb_sz = (hw_cap & XGMAC_HWFEAT_HASHTBLSZ) >> 24; dma_cap->rssen = (hw_cap & XGMAC_HWFEAT_RSSEN) >> 20; dma_cap->tsoen = (hw_cap & XGMAC_HWFEAT_TSOEN) >> 18; dma_cap->sphen = (hw_cap & XGMAC_HWFEAT_SPHEN) >> 17; -- cgit v1.2.3 From 432439fef933602cae51fb141f33014fb03f2b38 Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Mon, 30 Sep 2019 10:19:07 +0200 Subject: net: stmmac: selftests: Always use max DMA size in Jumbo Test Although some XGMAC setups support frames larger than DMA size, some of them may not. As we can't know before-hand which ones support let's use the maximum DMA buffer size in the Jumbo Tests. User can always reconfigure the MTU to achieve larger frames. Fixes: 427849e8c37f ("net: stmmac: selftests: Add Jumbo Frame tests") Signed-off-by: Jose Abreu Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c index 5f66f6161629..cc76a42c7466 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c @@ -1564,10 +1564,6 @@ static int __stmmac_test_jumbo(struct stmmac_priv *priv, u16 queue) struct stmmac_packet_attrs attr = { }; int size = priv->dma_buf_sz; - /* Only XGMAC has SW support for multiple RX descs in same packet */ - if (priv->plat->has_xgmac) - size = priv->dev->max_mtu; - attr.dst = priv->dev->dev_addr; attr.max_size = size - ETH_FCS_LEN; attr.queue_mapping = queue; -- cgit v1.2.3 From f79bfda3756c50a86c0ee65091935c42c5bbe0cb Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Mon, 30 Sep 2019 10:19:08 +0200 Subject: net: stmmac: dwmac4: Always update the MAC Hash Filter We need to always update the MAC Hash Filter so that previous entries are invalidated. Found out while running stmmac selftests. Fixes: b8ef7020d6e5 ("net: stmmac: add support for hash table size 128/256 in dwmac4") Signed-off-by: Jose Abreu Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c index 9b4b5f69fc02..2cb9c53f93b8 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c @@ -401,8 +401,11 @@ static void dwmac4_set_filter(struct mac_device_info *hw, int numhashregs = (hw->multicast_filter_bins >> 5); int mcbitslog2 = hw->mcast_bits_log2; unsigned int value; + u32 mc_filter[8]; int i; + memset(mc_filter, 0, sizeof(mc_filter)); + value = readl(ioaddr + GMAC_PACKET_FILTER); value &= ~GMAC_PACKET_FILTER_HMC; value &= ~GMAC_PACKET_FILTER_HPF; @@ -416,16 +419,13 @@ static void dwmac4_set_filter(struct mac_device_info *hw, /* Pass all multi */ value |= GMAC_PACKET_FILTER_PM; /* Set all the bits of the HASH tab */ - for (i = 0; i < numhashregs; i++) - writel(0xffffffff, ioaddr + GMAC_HASH_TAB(i)); + memset(mc_filter, 0xff, sizeof(mc_filter)); } else if (!netdev_mc_empty(dev)) { struct netdev_hw_addr *ha; - u32 mc_filter[8]; /* Hash filter for multicast */ value |= GMAC_PACKET_FILTER_HMC; - memset(mc_filter, 0, sizeof(mc_filter)); netdev_for_each_mc_addr(ha, dev) { /* The upper n bits of the calculated CRC are used to * index the contents of the hash table. The number of @@ -440,10 +440,11 @@ static void dwmac4_set_filter(struct mac_device_info *hw, */ mc_filter[bit_nr >> 5] |= (1 << (bit_nr & 0x1f)); } - for (i = 0; i < numhashregs; i++) - writel(mc_filter[i], ioaddr + GMAC_HASH_TAB(i)); } + for (i = 0; i < numhashregs; i++) + writel(mc_filter[i], ioaddr + GMAC_HASH_TAB(i)); + value |= GMAC_PACKET_FILTER_HPF; /* Handle multiple unicast addresses */ -- cgit v1.2.3 From 14f347334bf232074616e29e29103dd0c7c54dec Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Mon, 30 Sep 2019 10:19:09 +0200 Subject: net: stmmac: Correctly take timestamp for PTPv2 The case for PTPV2_EVENT requires event packets to be captured so add this setting to the list of enabled captures. Fixes: 891434b18ec0 ("stmmac: add IEEE PTPv1 and PTPv2 support.") Signed-off-by: Jose Abreu Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index d3232738fb25..31a237ec73bc 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -629,6 +629,7 @@ static int stmmac_hwtstamp_set(struct net_device *dev, struct ifreq *ifr) config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; ptp_v2 = PTP_TCR_TSVER2ENA; snap_type_sel = PTP_TCR_SNAPTYPSEL_1; + ts_event_en = PTP_TCR_TSEVNTENA; ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA; ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA; ptp_over_ethernet = PTP_TCR_TSIPENA; -- cgit v1.2.3 From 3e2bf04fb0447aa4b967b8000125178f55ae7800 Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Mon, 30 Sep 2019 10:19:10 +0200 Subject: net: stmmac: Do not stop PHY if WoL is enabled If WoL is enabled we can't really stop the PHY, otherwise we will not receive the WoL packet. Fix this by telling phylink that only the MAC is down and only stop the PHY if WoL is not enabled. Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic") Signed-off-by: Jose Abreu Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 31a237ec73bc..843d53e084b7 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -4718,9 +4718,7 @@ int stmmac_suspend(struct device *dev) mutex_lock(&priv->lock); - rtnl_lock(); - phylink_stop(priv->phylink); - rtnl_unlock(); + phylink_mac_change(priv->phylink, false); netif_device_detach(ndev); stmmac_stop_all_queues(priv); @@ -4735,6 +4733,10 @@ int stmmac_suspend(struct device *dev) stmmac_pmt(priv, priv->hw, priv->wolopts); priv->irq_wake = 1; } else { + rtnl_lock(); + phylink_stop(priv->phylink); + rtnl_unlock(); + stmmac_mac_set(priv, priv->ioaddr, false); pinctrl_pm_select_sleep_state(priv->device); /* Disable clock in case of PWM is off */ @@ -4825,9 +4827,13 @@ int stmmac_resume(struct device *dev) stmmac_start_all_queues(priv); - rtnl_lock(); - phylink_start(priv->phylink); - rtnl_unlock(); + if (!device_may_wakeup(priv->device)) { + rtnl_lock(); + phylink_start(priv->phylink); + rtnl_unlock(); + } + + phylink_mac_change(priv->phylink, true); mutex_unlock(&priv->lock); -- cgit v1.2.3 From 30300d9f9150e4673bbef68fcae40cf267b87293 Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Mon, 30 Sep 2019 10:19:11 +0200 Subject: net: stmmac: xgmac: Disable the Timestamp interrupt by default We don't use it anyway as XGMAC only supports polling for timestamp (in current SW implementation). This greatly reduces the system load by reducing the number of interrupts. Fixes: 2142754f8b9c ("net: stmmac: Add MAC related callbacks for XGMAC2") Signed-off-by: Jose Abreu Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h index f7eb06f8fb37..99037386080a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h @@ -84,7 +84,7 @@ #define XGMAC_TSIE BIT(12) #define XGMAC_LPIIE BIT(5) #define XGMAC_PMTIE BIT(4) -#define XGMAC_INT_DEFAULT_EN (XGMAC_LPIIE | XGMAC_PMTIE | XGMAC_TSIE) +#define XGMAC_INT_DEFAULT_EN (XGMAC_LPIIE | XGMAC_PMTIE) #define XGMAC_Qx_TX_FLOW_CTRL(x) (0x00000070 + (x) * 4) #define XGMAC_PT GENMASK(31, 16) #define XGMAC_PT_SHIFT 16 -- cgit v1.2.3 From 3c72d4d33059cf84a23492e827731f12c023ab00 Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Mon, 30 Sep 2019 10:19:12 +0200 Subject: net: stmmac: xgmac: Fix RSS not writing all Keys to HW The sizeof(cfg->key) is != ARRAY_SIZE(cfg->key). Fix it. This warning is triggered when running with cc flag -Wsizeof-array-div. Reported-by: kbuild test robot Reported-by: Nick Desaulniers Reported-by: Nathan Chancellor Fixes: 76067459c686 ("net: stmmac: Implement RSS and enable it in XGMAC core") Reviewed-by: Nick Desaulniers Signed-off-by: Jose Abreu Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c index 6d8ac2ef4fc2..4a1f52474dbc 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c @@ -533,7 +533,7 @@ static int dwxgmac2_rss_configure(struct mac_device_info *hw, return 0; } - for (i = 0; i < (sizeof(cfg->key) / sizeof(u32)); i++) { + for (i = 0; i < (ARRAY_SIZE(cfg->key) / sizeof(u32)); i++) { ret = dwxgmac2_rss_write_reg(ioaddr, true, i, cfg->key[i]); if (ret) return ret; -- cgit v1.2.3 From 56627336b655494356a23e65200c21718a1c3b2b Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Mon, 30 Sep 2019 10:19:13 +0200 Subject: net: stmmac: xgmac: Fix RSS writing wrong keys Commit b6b6cc9acd7b, changed the call to dwxgmac2_rss_write_reg() passing it the variable cfg->key[i]. As key is an u8 but we write 32 bits at a time we need to cast it into an u32 so that the correct key values are written. Notice that the for loop already takes this into account so we don't try to write past the keys size. Fixes: b6b6cc9acd7b ("net: stmmac: selftest: avoid large stack usage") Signed-off-by: Jose Abreu Reviewed-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c index 4a1f52474dbc..5031398e612c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c @@ -523,8 +523,8 @@ static int dwxgmac2_rss_configure(struct mac_device_info *hw, struct stmmac_rss *cfg, u32 num_rxq) { void __iomem *ioaddr = hw->pcsr; + u32 value, *key; int i, ret; - u32 value; value = readl(ioaddr + XGMAC_RSS_CTRL); if (!cfg || !cfg->enable) { @@ -533,8 +533,9 @@ static int dwxgmac2_rss_configure(struct mac_device_info *hw, return 0; } + key = (u32 *)cfg->key; for (i = 0; i < (ARRAY_SIZE(cfg->key) / sizeof(u32)); i++) { - ret = dwxgmac2_rss_write_reg(ioaddr, true, i, cfg->key[i]); + ret = dwxgmac2_rss_write_reg(ioaddr, true, i, key[i]); if (ret) return ret; } -- cgit v1.2.3 From 569aad4fcd82cba64eb10ede235d330a00f0aa09 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Tue, 1 Oct 2019 08:41:47 +0200 Subject: net: ag71xx: fix mdio subnode support This patch is syncing driver with actual devicetree documentation: Documentation/devicetree/bindings/net/qca,ar71xx.txt |Optional subnodes: |- mdio : specifies the mdio bus, used as a container for phy nodes | according to phy.txt in the same directory The driver was working with fixed phy without any noticeable issues. This bug was uncovered by introducing dsa ar9331-switch driver. Since no one reported this bug until now, I assume no body is using it and this patch should not brake existing system. Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver") Signed-off-by: Oleksij Rempel Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/ag71xx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/atheros/ag71xx.c b/drivers/net/ethernet/atheros/ag71xx.c index 7548247455d7..1b1a09095c0d 100644 --- a/drivers/net/ethernet/atheros/ag71xx.c +++ b/drivers/net/ethernet/atheros/ag71xx.c @@ -526,7 +526,7 @@ static int ag71xx_mdio_probe(struct ag71xx *ag) struct device *dev = &ag->pdev->dev; struct net_device *ndev = ag->ndev; static struct mii_bus *mii_bus; - struct device_node *np; + struct device_node *np, *mnp; int err; np = dev->of_node; @@ -571,7 +571,9 @@ static int ag71xx_mdio_probe(struct ag71xx *ag) msleep(200); } - err = of_mdiobus_register(mii_bus, np); + mnp = of_get_child_by_name(np, "mdio"); + err = of_mdiobus_register(mii_bus, mnp); + of_node_put(mnp); if (err) goto mdio_err_put_clk; -- cgit v1.2.3 From 8353da9fa69722b54cba82b2ec740afd3d438748 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 30 Sep 2019 17:12:41 +0200 Subject: hso: fix NULL-deref on tty open Fix NULL-pointer dereference on tty open due to a failure to handle a missing interrupt-in endpoint when probing modem ports: BUG: kernel NULL pointer dereference, address: 0000000000000006 ... RIP: 0010:tiocmget_submit_urb+0x1c/0xe0 [hso] ... Call Trace: hso_start_serial_device+0xdc/0x140 [hso] hso_serial_open+0x118/0x1b0 [hso] tty_open+0xf1/0x490 Fixes: 542f54823614 ("tty: Modem functions for the HSO driver") Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index ce78714f536f..a505b2ab88b8 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -2620,14 +2620,18 @@ static struct hso_device *hso_create_bulk_serial_device( */ if (serial->tiocmget) { tiocmget = serial->tiocmget; + tiocmget->endp = hso_get_ep(interface, + USB_ENDPOINT_XFER_INT, + USB_DIR_IN); + if (!tiocmget->endp) { + dev_err(&interface->dev, "Failed to find INT IN ep\n"); + goto exit; + } + tiocmget->urb = usb_alloc_urb(0, GFP_KERNEL); if (tiocmget->urb) { mutex_init(&tiocmget->mutex); init_waitqueue_head(&tiocmget->waitq); - tiocmget->endp = hso_get_ep( - interface, - USB_ENDPOINT_XFER_INT, - USB_DIR_IN); } else hso_free_tiomget(serial); } -- cgit v1.2.3 From a761129e3625688310aecf26e1be9e98e85f8eb5 Mon Sep 17 00:00:00 2001 From: Dongli Zhang Date: Tue, 1 Oct 2019 21:56:41 +0800 Subject: xen-netfront: do not use ~0U as error return value for xennet_fill_frags() xennet_fill_frags() uses ~0U as return value when the sk_buff is not able to cache extra fragments. This is incorrect because the return type of xennet_fill_frags() is RING_IDX and 0xffffffff is an expected value for ring buffer index. In the situation when the rsp_cons is approaching 0xffffffff, the return value of xennet_fill_frags() may become 0xffffffff which xennet_poll() (the caller) would regard as error. As a result, queue->rx.rsp_cons is set incorrectly because it is updated only when there is error. If there is no error, xennet_poll() would be responsible to update queue->rx.rsp_cons. Finally, queue->rx.rsp_cons would point to the rx ring buffer entries whose queue->rx_skbs[i] and queue->grant_rx_ref[i] are already cleared to NULL. This leads to NULL pointer access in the next iteration to process rx ring buffer entries. The symptom is similar to the one fixed in commit 00b368502d18 ("xen-netfront: do not assume sk_buff_head list is empty in error handling"). This patch changes the return type of xennet_fill_frags() to indicate whether it is successful or failed. The queue->rx.rsp_cons will be always updated inside this function. Fixes: ad4f15dc2c70 ("xen/netfront: don't bug in case of too many frags") Signed-off-by: Dongli Zhang Reviewed-by: Juergen Gross Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index e14ec75b61d6..482c6c8b0fb7 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -887,9 +887,9 @@ static int xennet_set_skb_gso(struct sk_buff *skb, return 0; } -static RING_IDX xennet_fill_frags(struct netfront_queue *queue, - struct sk_buff *skb, - struct sk_buff_head *list) +static int xennet_fill_frags(struct netfront_queue *queue, + struct sk_buff *skb, + struct sk_buff_head *list) { RING_IDX cons = queue->rx.rsp_cons; struct sk_buff *nskb; @@ -908,7 +908,7 @@ static RING_IDX xennet_fill_frags(struct netfront_queue *queue, if (unlikely(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS)) { queue->rx.rsp_cons = ++cons + skb_queue_len(list); kfree_skb(nskb); - return ~0U; + return -ENOENT; } skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, @@ -919,7 +919,9 @@ static RING_IDX xennet_fill_frags(struct netfront_queue *queue, kfree_skb(nskb); } - return cons; + queue->rx.rsp_cons = cons; + + return 0; } static int checksum_setup(struct net_device *dev, struct sk_buff *skb) @@ -1045,8 +1047,7 @@ err: skb->data_len = rx->status; skb->len += rx->status; - i = xennet_fill_frags(queue, skb, &tmpq); - if (unlikely(i == ~0U)) + if (unlikely(xennet_fill_frags(queue, skb, &tmpq))) goto err; if (rx->flags & XEN_NETRXF_csum_blank) @@ -1056,7 +1057,7 @@ err: __skb_queue_tail(&rxq, skb); - queue->rx.rsp_cons = ++i; + i = ++queue->rx.rsp_cons; work_done++; } -- cgit v1.2.3 From c91a9cfe9f6d136172a52ff6e01b3f83ba850c19 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 26 Sep 2019 10:54:33 +0200 Subject: rt2x00: initialize last_reset Initialize last_reset variable to INITIAL_JIFFIES, otherwise it is not possible to test H/W reset for first 5 minutes of system run. Fixes: e403fa31ed71 ("rt2x00: add restart hw") Reported-and-tested-by: Jonathan Liu Signed-off-by: Stanislaw Gruszka Signed-off-by: Kalle Valo --- drivers/net/wireless/ralink/rt2x00/rt2x00debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c b/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c index 4d4e3888ef20..f2395309ec00 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c @@ -555,7 +555,7 @@ static ssize_t rt2x00debug_write_restart_hw(struct file *file, { struct rt2x00debug_intf *intf = file->private_data; struct rt2x00_dev *rt2x00dev = intf->rt2x00dev; - static unsigned long last_reset; + static unsigned long last_reset = INITIAL_JIFFIES; if (!rt2x00_has_cap_restart_hw(rt2x00dev)) return -EOPNOTSUPP; -- cgit v1.2.3 From 8b6b82ad163b54a23f0e89710fb25461d45109c4 Mon Sep 17 00:00:00 2001 From: Michal Kubecek Date: Wed, 2 Oct 2019 14:12:41 +0200 Subject: mlx5: avoid 64-bit division in dr_icm_pool_mr_create() Recently added code introduces 64-bit division in dr_icm_pool_mr_create() so that build on 32-bit architectures fails with ERROR: "__umoddi3" [drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.ko] undefined! As the divisor is always a power of 2, we can use bitwise operation instead. Fixes: 29cf8febd185 ("net/mlx5: DR, ICM pool memory allocator") Reported-by: Borislav Petkov Signed-off-by: Michal Kubecek Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c index 913f1e5aaaf2..d7c7467e2d53 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_icm_pool.c @@ -137,7 +137,8 @@ dr_icm_pool_mr_create(struct mlx5dr_icm_pool *pool, icm_mr->icm_start_addr = icm_mr->dm.addr; - align_diff = icm_mr->icm_start_addr % align_base; + /* align_base is always a power of 2 */ + align_diff = icm_mr->icm_start_addr & (align_base - 1); if (align_diff) icm_mr->used_length = align_base - align_diff; -- cgit v1.2.3 From e8521e53cca584ddf8ec4584d3c550a6c65f88c4 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 1 Oct 2019 16:28:43 +0200 Subject: net: dsa: rtl8366: Check VLAN ID and not ports There has been some confusion between the port number and the VLAN ID in this driver. What we need to check for validity is the VLAN ID, nothing else. The current confusion came from assigning a few default VLANs for default routing and we need to rewrite that properly. Instead of checking if the port number is a valid VLAN ID, check the actual VLAN IDs passed in to the callback one by one as expected. Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij Signed-off-by: David S. Miller --- drivers/net/dsa/rtl8366.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c index ca3d17e43ed8..ac88caca5ad4 100644 --- a/drivers/net/dsa/rtl8366.c +++ b/drivers/net/dsa/rtl8366.c @@ -339,10 +339,12 @@ int rtl8366_vlan_prepare(struct dsa_switch *ds, int port, const struct switchdev_obj_port_vlan *vlan) { struct realtek_smi *smi = ds->priv; + u16 vid; int ret; - if (!smi->ops->is_vlan_valid(smi, port)) - return -EINVAL; + for (vid = vlan->vid_begin; vid < vlan->vid_end; vid++) + if (!smi->ops->is_vlan_valid(smi, vid)) + return -EINVAL; dev_info(smi->dev, "prepare VLANs %04x..%04x\n", vlan->vid_begin, vlan->vid_end); @@ -370,8 +372,9 @@ void rtl8366_vlan_add(struct dsa_switch *ds, int port, u16 vid; int ret; - if (!smi->ops->is_vlan_valid(smi, port)) - return; + for (vid = vlan->vid_begin; vid < vlan->vid_end; vid++) + if (!smi->ops->is_vlan_valid(smi, vid)) + return; dev_info(smi->dev, "add VLAN on port %d, %s, %s\n", port, -- cgit v1.2.3 From d6530e5ad45089c018c3cc5b5957a34721249f6f Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 1 Oct 2019 21:58:18 +0300 Subject: net: dsa: sja1105: Initialize the meta_lock Otherwise, with CONFIG_DEBUG_SPINLOCK=y, this stack trace gets printed when enabling RX timestamping and receiving a PTP frame: [ 318.537078] INFO: trying to register non-static key. [ 318.542040] the code is fine but needs lockdep annotation. [ 318.547500] turning off the locking correctness validator. [ 318.552972] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-13257-g0825b0669811-dirty #1962 [ 318.561283] Hardware name: Freescale LS1021A [ 318.565566] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 318.573289] [] (show_stack) from [] (dump_stack+0xd4/0x100) [ 318.580579] [] (dump_stack) from [] (register_lock_class+0x728/0x734) [ 318.588731] [] (register_lock_class) from [] (__lock_acquire+0x78/0x25cc) [ 318.597227] [] (__lock_acquire) from [] (lock_acquire+0xd8/0x234) [ 318.605033] [] (lock_acquire) from [] (_raw_spin_lock+0x44/0x54) [ 318.612755] [] (_raw_spin_lock) from [] (sja1105_rcv+0x1f8/0x4e8) [ 318.620561] [] (sja1105_rcv) from [] (dsa_switch_rcv+0x80/0x204) [ 318.628283] [] (dsa_switch_rcv) from [] (__netif_receive_skb_one_core+0x50/0x6c) [ 318.637386] [] (__netif_receive_skb_one_core) from [] (netif_receive_skb_internal+0xac/0x264) [ 318.647611] [] (netif_receive_skb_internal) from [] (napi_gro_receive+0x1d8/0x338) [ 318.656887] [] (napi_gro_receive) from [] (gfar_clean_rx_ring+0x328/0x724) [ 318.665472] [] (gfar_clean_rx_ring) from [] (gfar_poll_rx_sq+0x34/0x94) [ 318.673795] [] (gfar_poll_rx_sq) from [] (net_rx_action+0x128/0x4f8) [ 318.681860] [] (net_rx_action) from [] (__do_softirq+0x148/0x5ac) [ 318.689666] [] (__do_softirq) from [] (irq_exit+0x160/0x170) [ 318.697040] [] (irq_exit) from [] (__handle_domain_irq+0x60/0xb4) [ 318.704847] [] (__handle_domain_irq) from [] (gic_handle_irq+0x58/0x9c) [ 318.713172] [] (gic_handle_irq) from [] (__irq_svc+0x70/0x98) [ 318.720622] Exception stack(0xc2001f18 to 0xc2001f60) [ 318.725656] 1f00: 00000001 00000006 [ 318.733805] 1f20: 00000000 c20165c0 ffffe000 c2010cac c2010cf4 00000001 00000000 c2010c88 [ 318.741955] 1f40: c1f7a5a8 00000000 00000000 c2001f68 c03ba140 c030a288 200e0013 ffffffff [ 318.750110] [] (__irq_svc) from [] (arch_cpu_idle+0x24/0x3c) [ 318.757486] [] (arch_cpu_idle) from [] (do_idle+0x1b8/0x2a4) [ 318.764859] [] (do_idle) from [] (cpu_startup_entry+0x18/0x1c) [ 318.772407] [] (cpu_startup_entry) from [] (start_kernel+0x4cc/0x4fc) Fixes: 844d7edc6a34 ("net: dsa: sja1105: Add a global sja1105_tagger_data structure") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index f3d38ff144c4..ea2e7f4f96d0 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -2201,6 +2201,7 @@ static int sja1105_probe(struct spi_device *spi) tagger_data = &priv->tagger_data; skb_queue_head_init(&tagger_data->skb_rxtstamp_queue); INIT_WORK(&tagger_data->rxtstamp_work, sja1105_rxtstamp_work); + spin_lock_init(&tagger_data->meta_lock); /* Connections between dsa_port and sja1105_port */ for (i = 0; i < SJA1105_NUM_PORTS; i++) { -- cgit v1.2.3 From 3e8db7e56082156a37b71d7334860c10fcea8025 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 1 Oct 2019 21:58:19 +0300 Subject: net: dsa: sja1105: Fix sleeping while atomic in .port_hwtstamp_set Currently this stack trace can be seen with CONFIG_DEBUG_ATOMIC_SLEEP=y: [ 41.568348] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909 [ 41.576757] in_atomic(): 1, irqs_disabled(): 0, pid: 208, name: ptp4l [ 41.583212] INFO: lockdep is turned off. [ 41.587123] CPU: 1 PID: 208 Comm: ptp4l Not tainted 5.3.0-rc6-01445-ge950f2d4bc7f-dirty #1827 [ 41.599873] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 41.607584] [] (show_stack) from [] (dump_stack+0xd4/0x100) [ 41.614863] [] (dump_stack) from [] (___might_sleep+0x1c8/0x2b4) [ 41.622574] [] (___might_sleep) from [] (__mutex_lock+0x48/0xab8) [ 41.630368] [] (__mutex_lock) from [] (mutex_lock_nested+0x1c/0x24) [ 41.638340] [] (mutex_lock_nested) from [] (sja1105_static_config_reload+0x30/0x27c) [ 41.647779] [] (sja1105_static_config_reload) from [] (sja1105_hwtstamp_set+0x108/0x1cc) [ 41.657562] [] (sja1105_hwtstamp_set) from [] (dev_ifsioc+0x18c/0x330) [ 41.665788] [] (dev_ifsioc) from [] (dev_ioctl+0x320/0x6e8) [ 41.673064] [] (dev_ioctl) from [] (sock_ioctl+0x334/0x5e8) [ 41.680340] [] (sock_ioctl) from [] (do_vfs_ioctl+0xb0/0xa10) [ 41.687789] [] (do_vfs_ioctl) from [] (ksys_ioctl+0x34/0x58) [ 41.695151] [] (ksys_ioctl) from [] (ret_fast_syscall+0x0/0x28) [ 41.702768] Exception stack(0xe8495fa8 to 0xe8495ff0) [ 41.707796] 5fa0: beff4a8c 00000001 00000011 000089b0 beff4a8c beff4a80 [ 41.715933] 5fc0: beff4a8c 00000001 0000000c 00000036 b6fa98c8 004e19c1 00000001 00000000 [ 41.724069] 5fe0: 004dcedc beff4a6c 004c0738 b6e7af4c [ 41.729860] BUG: scheduling while atomic: ptp4l/208/0x00000002 [ 41.735682] INFO: lockdep is turned off. Enabling RX timestamping will logically disturb the fastpath (processing of meta frames). Replace bool hwts_rx_en with a bit that is checked atomically from the fastpath and temporarily unset from the sleepable context during a change of the RX timestamping process (a destructive operation anyways, requires switch reset). If found unset, the fastpath (net/dsa/tag_sja1105.c) will just drop any received meta frame and not take the meta_lock at all. Fixes: a602afd200f5 ("net: dsa: sja1105: Expose PTP timestamping ioctls to userspace") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105_main.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index ea2e7f4f96d0..7687ddcae159 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -1897,7 +1897,9 @@ static int sja1105_set_ageing_time(struct dsa_switch *ds, return sja1105_static_config_reload(priv); } -/* Caller must hold priv->tagger_data.meta_lock */ +/* Must be called only with priv->tagger_data.state bit + * SJA1105_HWTS_RX_EN cleared + */ static int sja1105_change_rxtstamping(struct sja1105_private *priv, bool on) { @@ -1954,16 +1956,17 @@ static int sja1105_hwtstamp_set(struct dsa_switch *ds, int port, break; } - if (rx_on != priv->tagger_data.hwts_rx_en) { - spin_lock(&priv->tagger_data.meta_lock); + if (rx_on != test_bit(SJA1105_HWTS_RX_EN, &priv->tagger_data.state)) { + clear_bit(SJA1105_HWTS_RX_EN, &priv->tagger_data.state); + rc = sja1105_change_rxtstamping(priv, rx_on); - spin_unlock(&priv->tagger_data.meta_lock); if (rc < 0) { dev_err(ds->dev, "Failed to change RX timestamping: %d\n", rc); - return -EFAULT; + return rc; } - priv->tagger_data.hwts_rx_en = rx_on; + if (rx_on) + set_bit(SJA1105_HWTS_RX_EN, &priv->tagger_data.state); } if (copy_to_user(ifr->ifr_data, &config, sizeof(config))) @@ -1982,7 +1985,7 @@ static int sja1105_hwtstamp_get(struct dsa_switch *ds, int port, config.tx_type = HWTSTAMP_TX_ON; else config.tx_type = HWTSTAMP_TX_OFF; - if (priv->tagger_data.hwts_rx_en) + if (test_bit(SJA1105_HWTS_RX_EN, &priv->tagger_data.state)) config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; else config.rx_filter = HWTSTAMP_FILTER_NONE; @@ -2031,7 +2034,7 @@ static bool sja1105_port_rxtstamp(struct dsa_switch *ds, int port, struct sja1105_private *priv = ds->priv; struct sja1105_tagger_data *data = &priv->tagger_data; - if (!data->hwts_rx_en) + if (!test_bit(SJA1105_HWTS_RX_EN, &data->state)) return false; /* We need to read the full PTP clock to reconstruct the Rx -- cgit v1.2.3 From 53de429f4e88f538f7a8ec2b18be8c0cd9b2c8e1 Mon Sep 17 00:00:00 2001 From: Yizhuo Date: Tue, 1 Oct 2019 13:24:39 -0700 Subject: net: hisilicon: Fix usage of uninitialized variable in function mdio_sc_cfg_reg_write() In function mdio_sc_cfg_reg_write(), variable "reg_value" could be uninitialized if regmap_read() fails. However, "reg_value" is used to decide the control flow later in the if statement, which is potentially unsafe. Signed-off-by: Yizhuo Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns_mdio.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/hisilicon/hns_mdio.c b/drivers/net/ethernet/hisilicon/hns_mdio.c index 3e863a71c513..7df5d7d211d4 100644 --- a/drivers/net/ethernet/hisilicon/hns_mdio.c +++ b/drivers/net/ethernet/hisilicon/hns_mdio.c @@ -148,11 +148,15 @@ static int mdio_sc_cfg_reg_write(struct hns_mdio_device *mdio_dev, { u32 time_cnt; u32 reg_value; + int ret; regmap_write(mdio_dev->subctrl_vbase, cfg_reg, set_val); for (time_cnt = MDIO_TIMEOUT; time_cnt; time_cnt--) { - regmap_read(mdio_dev->subctrl_vbase, st_reg, ®_value); + ret = regmap_read(mdio_dev->subctrl_vbase, st_reg, ®_value); + if (ret) + return ret; + reg_value &= st_msk; if ((!!check_st) == (!!reg_value)) break; -- cgit v1.2.3 From 134cc4cefad34d8d24670d8a911b59c3b89c6731 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 2 Oct 2019 16:49:46 +0200 Subject: net: stmmac: Avoid deadlock on suspend/resume The stmmac driver will try to acquire its private mutex during suspend via phylink_resolve() -> stmmac_mac_link_down() -> stmmac_eee_init(). However, the phylink configuration is updated with the private mutex held already, which causes a deadlock during suspend. Fix this by moving the phylink configuration updates out of the region of code protected by the private mutex. Fixes: 19e13cb27b99 ("net: stmmac: Hold rtnl lock in suspend/resume callbacks") Suggested-by: Bitan Biswas Signed-off-by: Thierry Reding Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 843d53e084b7..c76a1336a451 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -4716,10 +4716,10 @@ int stmmac_suspend(struct device *dev) if (!ndev || !netif_running(ndev)) return 0; - mutex_lock(&priv->lock); - phylink_mac_change(priv->phylink, false); + mutex_lock(&priv->lock); + netif_device_detach(ndev); stmmac_stop_all_queues(priv); @@ -4733,9 +4733,11 @@ int stmmac_suspend(struct device *dev) stmmac_pmt(priv, priv->hw, priv->wolopts); priv->irq_wake = 1; } else { + mutex_unlock(&priv->lock); rtnl_lock(); phylink_stop(priv->phylink); rtnl_unlock(); + mutex_lock(&priv->lock); stmmac_mac_set(priv, priv->ioaddr, false); pinctrl_pm_select_sleep_state(priv->device); @@ -4827,6 +4829,8 @@ int stmmac_resume(struct device *dev) stmmac_start_all_queues(priv); + mutex_unlock(&priv->lock); + if (!device_may_wakeup(priv->device)) { rtnl_lock(); phylink_start(priv->phylink); @@ -4835,8 +4839,6 @@ int stmmac_resume(struct device *dev) phylink_mac_change(priv->phylink, true); - mutex_unlock(&priv->lock); - return 0; } EXPORT_SYMBOL_GPL(stmmac_resume); -- cgit v1.2.3 From 313c3fe9c2348e7147eca38bb446f295b45403a0 Mon Sep 17 00:00:00 2001 From: Michael Vassernis Date: Thu, 3 Oct 2019 07:31:38 +0000 Subject: mac80211_hwsim: fix incorrect dev_alloc_name failure goto If dev_alloc_name fails, hwsim_mon's memory allocated in alloc_netdev needs to be freed. Change goto command in dev_alloc_name failure to out_free_mon in order to perform free_netdev. Signed-off-by: Michael Vassernis Link: https://lore.kernel.org/r/20191003073049.3760-1-michael.vassernis@tandemg.com Signed-off-by: Johannes Berg --- drivers/net/wireless/mac80211_hwsim.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 45c73a6f09a1..14f562cd715c 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -4026,7 +4026,7 @@ static int __init init_mac80211_hwsim(void) err = dev_alloc_name(hwsim_mon, hwsim_mon->name); if (err < 0) { rtnl_unlock(); - goto out_free_radios; + goto out_free_mon; } err = register_netdevice(hwsim_mon); -- cgit v1.2.3 From 0417791536ae1e28d7f0418f1d20048ec4d3c6cf Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Tue, 1 Oct 2019 12:38:21 -0300 Subject: RDMA/mlx5: Add missing synchronize_srcu() for MW cases While MR uses live as the SRCU 'update', the MW case uses the xarray directly, xa_erase() causes the MW to become inaccessible to the pagefault thread. Thus whenever a MW is removed from the xarray we must synchronize_srcu() before freeing it. This must be done before freeing the mkey as re-use of the mkey while the pagefault thread is using the stale mkey is undesirable. Add the missing synchronizes to MW and DEVX indirect mkey and delete the bogus protection against double destroy in mlx5_core_destroy_mkey() Fixes: 534fd7aac56a ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP") Fixes: 6aec21f6a832 ("IB/mlx5: Page faults handling infrastructure") Link: https://lore.kernel.org/r/20191001153821.23621-7-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov Signed-off-by: Jason Gunthorpe --- drivers/net/ethernet/mellanox/mlx5/core/mr.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/mr.c b/drivers/net/ethernet/mellanox/mlx5/core/mr.c index 9231b39d18b2..c501bf2a0252 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/mr.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/mr.c @@ -112,17 +112,11 @@ int mlx5_core_destroy_mkey(struct mlx5_core_dev *dev, u32 out[MLX5_ST_SZ_DW(destroy_mkey_out)] = {0}; u32 in[MLX5_ST_SZ_DW(destroy_mkey_in)] = {0}; struct xarray *mkeys = &dev->priv.mkey_table; - struct mlx5_core_mkey *deleted_mkey; unsigned long flags; xa_lock_irqsave(mkeys, flags); - deleted_mkey = __xa_erase(mkeys, mlx5_base_mkey(mkey->key)); + __xa_erase(mkeys, mlx5_base_mkey(mkey->key)); xa_unlock_irqrestore(mkeys, flags); - if (!deleted_mkey) { - mlx5_core_dbg(dev, "failed xarray delete of mkey 0x%x\n", - mlx5_base_mkey(mkey->key)); - return -ENOENT; - } MLX5_SET(destroy_mkey_in, in, opcode, MLX5_CMD_OP_DESTROY_MKEY); MLX5_SET(destroy_mkey_in, in, mkey_index, mlx5_mkey_to_idx(mkey->key)); -- cgit v1.2.3 From cf74ac6db25d4002089e85cc623ad149ecc25614 Mon Sep 17 00:00:00 2001 From: Reinhard Speyerer Date: Thu, 3 Oct 2019 18:34:39 +0200 Subject: qmi_wwan: add support for Cinterion CLS8 devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add support for Cinterion CLS8 devices. Use QMI_QUIRK_SET_DTR as required for Qualcomm MDM9x07 chipsets. T: Bus=01 Lev=03 Prnt=05 Port=01 Cnt=02 Dev#= 25 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00b0 Rev= 3.18 S: Manufacturer=GEMALTO S: Product=USB Modem C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Reinhard Speyerer Acked-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index b6dc5d714b5e..3d77cd402ba9 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1350,6 +1350,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1e2d, 0x0082, 4)}, /* Cinterion PHxx,PXxx (2 RmNet) */ {QMI_FIXED_INTF(0x1e2d, 0x0082, 5)}, /* Cinterion PHxx,PXxx (2 RmNet) */ {QMI_FIXED_INTF(0x1e2d, 0x0083, 4)}, /* Cinterion PHxx,PXxx (1 RmNet + USB Audio)*/ + {QMI_QUIRK_SET_DTR(0x1e2d, 0x00b0, 4)}, /* Cinterion CLS8 */ {QMI_FIXED_INTF(0x413c, 0x81a2, 8)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ {QMI_FIXED_INTF(0x413c, 0x81a3, 8)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ {QMI_FIXED_INTF(0x413c, 0x81a4, 8)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */ -- cgit v1.2.3 From 6b517374f4ea5a3c6e307e1219ec5f35d42e6d00 Mon Sep 17 00:00:00 2001 From: Vishal Kulkarni Date: Fri, 4 Oct 2019 04:06:15 +0530 Subject: cxgb4:Fix out-of-bounds MSI-X info array access When fetching free MSI-X vectors for ULDs, check for the error code before accessing MSI-X info array. Otherwise, an out-of-bounds access is attempted, which results in kernel panic. Fixes: 94cdb8bb993a ("cxgb4: Add support for dynamic allocation of resources for ULD") Signed-off-by: Shahjada Abul Husain Signed-off-by: Vishal Kulkarni Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c index 5b602243d573..a4dead4ab0ed 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c @@ -137,13 +137,12 @@ static int uldrx_handler(struct sge_rspq *q, const __be64 *rsp, static int alloc_uld_rxqs(struct adapter *adap, struct sge_uld_rxq_info *rxq_info, bool lro) { - struct sge *s = &adap->sge; unsigned int nq = rxq_info->nrxq + rxq_info->nciq; + int i, err, msi_idx, que_idx = 0, bmap_idx = 0; struct sge_ofld_rxq *q = rxq_info->uldrxq; unsigned short *ids = rxq_info->rspq_id; - unsigned int bmap_idx = 0; + struct sge *s = &adap->sge; unsigned int per_chan; - int i, err, msi_idx, que_idx = 0; per_chan = rxq_info->nrxq / adap->params.nports; @@ -161,6 +160,10 @@ static int alloc_uld_rxqs(struct adapter *adap, if (msi_idx >= 0) { bmap_idx = get_msix_idx_from_bmap(adap); + if (bmap_idx < 0) { + err = -ENOSPC; + goto freeout; + } msi_idx = adap->msix_info_ulds[bmap_idx].idx; } err = t4_sge_alloc_rxq(adap, &q->rspq, false, -- cgit v1.2.3 From a54cdeeb04fc719e4c7f19d6e28dba7ea86cee5b Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Fri, 4 Oct 2019 20:51:04 +0800 Subject: r8152: Set macpassthru in reset_resume callback r8152 may fail to establish network connection after resume from system suspend. If the USB port connects to r8152 lost its power during system suspend, the MAC address was written before is lost. The reason is that The MAC address doesn't get written again in its reset_resume callback. So let's set MAC address again in reset_resume callback. Also remove unnecessary lock as no other locking attempt will happen during reset_resume. Signed-off-by: Kai-Heng Feng Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 08726090570e..cee9fef925cd 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -4799,10 +4799,9 @@ static int rtl8152_reset_resume(struct usb_interface *intf) struct r8152 *tp = usb_get_intfdata(intf); clear_bit(SELECTIVE_SUSPEND, &tp->flags); - mutex_lock(&tp->control); tp->rtl_ops.init(tp); queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0); - mutex_unlock(&tp->control); + set_ethernet_addr(tp); return rtl8152_resume(intf); } -- cgit v1.2.3 From ea977d19d918324ad5b66953f051a6ed07d0a3c5 Mon Sep 17 00:00:00 2001 From: Andrea Merello Date: Fri, 4 Oct 2019 15:53:32 +0200 Subject: net: phy: allow for reset line to be tied to a sleepy GPIO controller mdio_device_reset() makes use of the atomic-pretending API flavor for handling the PHY reset GPIO line. I found no hint that mdio_device_reset() is called from atomic context and indeed it uses usleep_range() since long time, so I would assume that it is OK to sleep there. This patch switch to gpiod_set_value_cansleep() in mdio_device_reset(). This is relevant if e.g. the PHY reset line is tied to a I2C GPIO controller. This has been tested on a ZynqMP board running an upstream 4.19 kernel and then hand-ported on current kernel tree. Signed-off-by: Andrea Merello Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/mdio_device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/mdio_device.c b/drivers/net/phy/mdio_device.c index e282600bd83e..c1d345c3cab3 100644 --- a/drivers/net/phy/mdio_device.c +++ b/drivers/net/phy/mdio_device.c @@ -121,7 +121,7 @@ void mdio_device_reset(struct mdio_device *mdiodev, int value) return; if (mdiodev->reset_gpio) - gpiod_set_value(mdiodev->reset_gpio, value); + gpiod_set_value_cansleep(mdiodev->reset_gpio, value); if (mdiodev->reset_ctrl) { if (value) -- cgit v1.2.3 From 4cf6c57e61fee954f7b7685de31b80ec26843d27 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 4 Oct 2019 17:05:58 +0100 Subject: net: phy: fix write to mii-ctrl1000 register When userspace writes to the MII_ADVERTISE register, we update phylib's advertising mask and trigger a renegotiation. However, writing to the MII_CTRL1000 register, which contains the gigabit advertisement, does neither. This can lead to phylib's copy of the advertisement becoming de-synced with the values in the PHY register set, which can result in incorrect negotiation resolution. Fixes: 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status") Reviewed-by: Andrew Lunn Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 7c92afd36bbe..119e6f466056 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -457,6 +457,11 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd) val); change_autoneg = true; break; + case MII_CTRL1000: + mii_ctrl1000_mod_linkmode_adv_t(phydev->advertising, + val); + change_autoneg = true; + break; default: /* do nothing */ break; -- cgit v1.2.3 From 8d3dc3ac9dd6801c732a72ca6979698c38451b4f Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 4 Oct 2019 17:06:04 +0100 Subject: net: phy: extract link partner advertisement reading Move reading the link partner advertisement out of genphy_read_status() into its own separate function. This will allow re-use of this code by PHY drivers that are able to read the resolved status from the PHY. Tested-by: tinywrkb Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 65 +++++++++++++++++++++++++++----------------- 1 file changed, 40 insertions(+), 25 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index d347ddcac45b..9d2bbb13293e 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1783,32 +1783,9 @@ done: } EXPORT_SYMBOL(genphy_update_link); -/** - * genphy_read_status - check the link status and update current link state - * @phydev: target phy_device struct - * - * Description: Check the link, then figure out the current state - * by comparing what we advertise with what the link partner - * advertises. Start by checking the gigabit possibilities, - * then move on to 10/100. - */ -int genphy_read_status(struct phy_device *phydev) +int genphy_read_lpa(struct phy_device *phydev) { - int lpa, lpagb, err, old_link = phydev->link; - - /* Update the link, but return if there was an error */ - err = genphy_update_link(phydev); - if (err) - return err; - - /* why bother the PHY if nothing can have changed */ - if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link) - return 0; - - phydev->speed = SPEED_UNKNOWN; - phydev->duplex = DUPLEX_UNKNOWN; - phydev->pause = 0; - phydev->asym_pause = 0; + int lpa, lpagb; if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) { if (phydev->is_gigabit_capable) { @@ -1838,6 +1815,44 @@ int genphy_read_status(struct phy_device *phydev) return lpa; mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa); + } + + return 0; +} +EXPORT_SYMBOL(genphy_read_lpa); + +/** + * genphy_read_status - check the link status and update current link state + * @phydev: target phy_device struct + * + * Description: Check the link, then figure out the current state + * by comparing what we advertise with what the link partner + * advertises. Start by checking the gigabit possibilities, + * then move on to 10/100. + */ +int genphy_read_status(struct phy_device *phydev) +{ + int err, old_link = phydev->link; + + /* Update the link, but return if there was an error */ + err = genphy_update_link(phydev); + if (err) + return err; + + /* why bother the PHY if nothing can have changed */ + if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link) + return 0; + + phydev->speed = SPEED_UNKNOWN; + phydev->duplex = DUPLEX_UNKNOWN; + phydev->pause = 0; + phydev->asym_pause = 0; + + err = genphy_read_lpa(phydev); + if (err < 0) + return err; + + if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) { phy_resolve_aneg_linkmode(phydev); } else if (phydev->autoneg == AUTONEG_DISABLE) { int bmcr = phy_read(phydev, MII_BMCR); -- cgit v1.2.3 From 2d880b8709c013d47472f85a9d42ea1aca3bce47 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 4 Oct 2019 17:06:09 +0100 Subject: net: phy: extract pause mode Extract the update of phylib's software pause mode state from genphy_read_status(), so that we can re-use this functionality with PHYs that have alternative ways to read the negotiation results. Tested-by: tinywrkb Reviewed-by: Andrew Lunn Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/phy-core.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c index 369903d9b6ec..9412669b579c 100644 --- a/drivers/net/phy/phy-core.c +++ b/drivers/net/phy/phy-core.c @@ -283,6 +283,18 @@ void of_set_phy_eee_broken(struct phy_device *phydev) phydev->eee_broken_modes = broken; } +void phy_resolve_aneg_pause(struct phy_device *phydev) +{ + if (phydev->duplex == DUPLEX_FULL) { + phydev->pause = linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, + phydev->lp_advertising); + phydev->asym_pause = linkmode_test_bit( + ETHTOOL_LINK_MODE_Asym_Pause_BIT, + phydev->lp_advertising); + } +} +EXPORT_SYMBOL_GPL(phy_resolve_aneg_pause); + /** * phy_resolve_aneg_linkmode - resolve the advertisements into phy settings * @phydev: The phy_device struct @@ -305,13 +317,7 @@ void phy_resolve_aneg_linkmode(struct phy_device *phydev) break; } - if (phydev->duplex == DUPLEX_FULL) { - phydev->pause = linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, - phydev->lp_advertising); - phydev->asym_pause = linkmode_test_bit( - ETHTOOL_LINK_MODE_Asym_Pause_BIT, - phydev->lp_advertising); - } + phy_resolve_aneg_pause(phydev); } EXPORT_SYMBOL_GPL(phy_resolve_aneg_linkmode); -- cgit v1.2.3 From 06d5f3441b2e80eeb6deb0885aefa00589e463c1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 4 Oct 2019 17:06:14 +0100 Subject: net: phy: at803x: use operating parameters from PHY-specific status Read the PHY-specific status register for the current operating mode (speed and duplex) of the PHY. This register reflects the actual mode that the PHY has resolved depending on either the advertisements of autoneg is enabled, or the forced mode if autoneg is disabled. This ensures that phylib's software state always tracks the hardware state. It seems both AR8033 (which uses the AR8031 ID) and AR8035 support this status register. AR8030 is not known at the present time. This patch depends on "net: phy: extract pause mode" and "net: phy: extract link partner advertisement reading". Reported-by: tinywrkb Reviewed-by: Andrew Lunn Tested-by: tinywrkb Fixes: 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status") Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/at803x.c | 69 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 2aa7b2e60046..1eb5d4fb8925 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -15,6 +15,15 @@ #include #include +#define AT803X_SPECIFIC_STATUS 0x11 +#define AT803X_SS_SPEED_MASK (3 << 14) +#define AT803X_SS_SPEED_1000 (2 << 14) +#define AT803X_SS_SPEED_100 (1 << 14) +#define AT803X_SS_SPEED_10 (0 << 14) +#define AT803X_SS_DUPLEX BIT(13) +#define AT803X_SS_SPEED_DUPLEX_RESOLVED BIT(11) +#define AT803X_SS_MDIX BIT(6) + #define AT803X_INTR_ENABLE 0x12 #define AT803X_INTR_ENABLE_AUTONEG_ERR BIT(15) #define AT803X_INTR_ENABLE_SPEED_CHANGED BIT(14) @@ -357,6 +366,64 @@ static int at803x_aneg_done(struct phy_device *phydev) return aneg_done; } +static int at803x_read_status(struct phy_device *phydev) +{ + int ss, err, old_link = phydev->link; + + /* Update the link, but return if there was an error */ + err = genphy_update_link(phydev); + if (err) + return err; + + /* why bother the PHY if nothing can have changed */ + if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link) + return 0; + + phydev->speed = SPEED_UNKNOWN; + phydev->duplex = DUPLEX_UNKNOWN; + phydev->pause = 0; + phydev->asym_pause = 0; + + err = genphy_read_lpa(phydev); + if (err < 0) + return err; + + /* Read the AT8035 PHY-Specific Status register, which indicates the + * speed and duplex that the PHY is actually using, irrespective of + * whether we are in autoneg mode or not. + */ + ss = phy_read(phydev, AT803X_SPECIFIC_STATUS); + if (ss < 0) + return ss; + + if (ss & AT803X_SS_SPEED_DUPLEX_RESOLVED) { + switch (ss & AT803X_SS_SPEED_MASK) { + case AT803X_SS_SPEED_10: + phydev->speed = SPEED_10; + break; + case AT803X_SS_SPEED_100: + phydev->speed = SPEED_100; + break; + case AT803X_SS_SPEED_1000: + phydev->speed = SPEED_1000; + break; + } + if (ss & AT803X_SS_DUPLEX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + if (ss & AT803X_SS_MDIX) + phydev->mdix = ETH_TP_MDI_X; + else + phydev->mdix = ETH_TP_MDI; + } + + if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) + phy_resolve_aneg_pause(phydev); + + return 0; +} + static struct phy_driver at803x_driver[] = { { /* ATHEROS 8035 */ @@ -370,6 +437,7 @@ static struct phy_driver at803x_driver[] = { .suspend = at803x_suspend, .resume = at803x_resume, /* PHY_GBIT_FEATURES */ + .read_status = at803x_read_status, .ack_interrupt = at803x_ack_interrupt, .config_intr = at803x_config_intr, }, { @@ -399,6 +467,7 @@ static struct phy_driver at803x_driver[] = { .suspend = at803x_suspend, .resume = at803x_resume, /* PHY_GBIT_FEATURES */ + .read_status = at803x_read_status, .aneg_done = at803x_aneg_done, .ack_interrupt = &at803x_ack_interrupt, .config_intr = &at803x_config_intr, -- cgit v1.2.3 From 1acb8f2a7a9f10543868ddd737e37424d5c36cf4 Mon Sep 17 00:00:00 2001 From: Navid Emamdoost Date: Fri, 4 Oct 2019 15:24:39 -0500 Subject: net: qlogic: Fix memory leak in ql_alloc_large_buffers In ql_alloc_large_buffers, a new skb is allocated via netdev_alloc_skb. This skb should be released if pci_dma_mapping_error fails. Fixes: 0f8ab89e825f ("qla3xxx: Check return code from pci_map_single() in ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send()") Signed-off-by: Navid Emamdoost Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qla3xxx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c index 457444894d80..b4b8ba00ee01 100644 --- a/drivers/net/ethernet/qlogic/qla3xxx.c +++ b/drivers/net/ethernet/qlogic/qla3xxx.c @@ -2787,6 +2787,7 @@ static int ql_alloc_large_buffers(struct ql3_adapter *qdev) netdev_err(qdev->ndev, "PCI mapping failed with error: %d\n", err); + dev_kfree_skb_irq(skb); ql_free_large_buffers(qdev); return -ENOMEM; } -- cgit v1.2.3 From c763ac436b668d7417f0979430ec0312ede4093d Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sat, 5 Oct 2019 15:05:18 -0700 Subject: net: dsa: b53: Do not clear existing mirrored port mask Clearing the existing bitmask of mirrored ports essentially prevents us from capturing more than one port at any given time. This is clearly wrong, do not clear the bitmask prior to setting up the new port. Reported-by: Hubert Feurstein Fixes: ed3af5fd08eb ("net: dsa: b53: Add support for port mirroring") Signed-off-by: Florian Fainelli Reviewed-by: Vivien Didelot Signed-off-by: David S. Miller --- drivers/net/dsa/b53/b53_common.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index 526ba2ab66f1..cc3536315eff 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -1845,7 +1845,6 @@ int b53_mirror_add(struct dsa_switch *ds, int port, loc = B53_EG_MIR_CTL; b53_read16(dev, B53_MGMT_PAGE, loc, ®); - reg &= ~MIRROR_MASK; reg |= BIT(port); b53_write16(dev, B53_MGMT_PAGE, loc, reg); -- cgit v1.2.3 From b870b0f867c77b92d7fd17ace8421904270d3c6a Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Sun, 6 Oct 2019 13:08:55 +0200 Subject: net: stmmac: selftests: Check if filtering is available before running We need to check if the number of available Hash Filters is enough to run the test, otherwise we will get false failures. Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support") Signed-off-by: Jose Abreu Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c index cc76a42c7466..ed3926d4471d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c @@ -496,6 +496,9 @@ static int stmmac_test_hfilt(struct stmmac_priv *priv) if (ret) return ret; + if (netdev_mc_count(priv->dev) >= priv->hw->multicast_filter_bins) + return -EOPNOTSUPP; + ret = dev_mc_add(priv->dev, gd_addr); if (ret) return ret; @@ -573,6 +576,8 @@ static int stmmac_test_mcfilt(struct stmmac_priv *priv) if (stmmac_filter_check(priv)) return -EOPNOTSUPP; + if (!priv->hw->multicast_filter_bins) + return -EOPNOTSUPP; /* Remove all MC addresses */ __dev_mc_unsync(priv->dev, NULL); @@ -611,6 +616,8 @@ static int stmmac_test_ucfilt(struct stmmac_priv *priv) if (stmmac_filter_check(priv)) return -EOPNOTSUPP; + if (!priv->hw->multicast_filter_bins) + return -EOPNOTSUPP; /* Remove all UC addresses */ __dev_uc_unsync(priv->dev, NULL); -- cgit v1.2.3 From 25683bab09a70542b9f8e3e28f79b3369e56701f Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Sun, 6 Oct 2019 13:08:56 +0200 Subject: net: stmmac: gmac4+: Not all Unicast addresses may be available Some setups may not have all Unicast addresses filters available. Check the number of available filters before trying to setup it. Fixes: 477286b53f55 ("stmmac: add GMAC4 core support") Signed-off-by: Jose Abreu Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c index 2cb9c53f93b8..5a7b0aca1d31 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c @@ -448,7 +448,7 @@ static void dwmac4_set_filter(struct mac_device_info *hw, value |= GMAC_PACKET_FILTER_HPF; /* Handle multiple unicast addresses */ - if (netdev_uc_count(dev) > GMAC_MAX_PERFECT_ADDRESSES) { + if (netdev_uc_count(dev) > hw->unicast_filter_entries) { /* Switch to promiscuous mode if more than 128 addrs * are required */ -- cgit v1.2.3 From 2809fc13163f4946d7cde092807bea44bbae4478 Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Sun, 6 Oct 2019 13:08:57 +0200 Subject: net: stmmac: selftests: Fix L2 Hash Filter test With the current MAC addresses hard-coded in the test we can get some false positives as we use the Hash Filtering method. Let's change the MAC addresses in the tests to be unique when hashed. Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support") Signed-off-by: Jose Abreu Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c index ed3926d4471d..e4ac3c401432 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c @@ -487,8 +487,8 @@ static int stmmac_filter_check(struct stmmac_priv *priv) static int stmmac_test_hfilt(struct stmmac_priv *priv) { - unsigned char gd_addr[ETH_ALEN] = {0x01, 0x00, 0xcc, 0xcc, 0xdd, 0xdd}; - unsigned char bd_addr[ETH_ALEN] = {0x09, 0x00, 0xaa, 0xaa, 0xbb, 0xbb}; + unsigned char gd_addr[ETH_ALEN] = {0x01, 0xee, 0xdd, 0xcc, 0xbb, 0xaa}; + unsigned char bd_addr[ETH_ALEN] = {0x01, 0x01, 0x02, 0x03, 0x04, 0x05}; struct stmmac_packet_attrs attr = { }; int ret; -- cgit v1.2.3 From 4b5149365faa8fddf7dc58e47cfed51b19db051e Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Sun, 6 Oct 2019 13:21:07 -0700 Subject: ionic: fix stats memory dereference When the netdev is down, the queues and their debug stats do not exist, so don't try using a pointer to them when when printing the ethtool stats. Fixes: e470355bd96a ("ionic: Add driver stats") Signed-off-by: Shannon Nelson Signed-off-by: David S. Miller --- drivers/net/ethernet/pensando/ionic/ionic_lif.h | 2 ++ drivers/net/ethernet/pensando/ionic/ionic_stats.c | 29 +++++++++++++++-------- 2 files changed, 21 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.h b/drivers/net/ethernet/pensando/ionic/ionic_lif.h index 812190e729c2..6a95b42a8d8c 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_lif.h +++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.h @@ -182,6 +182,8 @@ struct ionic_lif { #define lif_to_txqcq(lif, i) ((lif)->txqcqs[i].qcq) #define lif_to_rxqcq(lif, i) ((lif)->rxqcqs[i].qcq) +#define lif_to_txstats(lif, i) ((lif)->txqcqs[i].stats->tx) +#define lif_to_rxstats(lif, i) ((lif)->rxqcqs[i].stats->rx) #define lif_to_txq(lif, i) (&lif_to_txqcq((lif), i)->q) #define lif_to_rxq(lif, i) (&lif_to_txqcq((lif), i)->q) diff --git a/drivers/net/ethernet/pensando/ionic/ionic_stats.c b/drivers/net/ethernet/pensando/ionic/ionic_stats.c index e2907884f843..03916b6d47f2 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_stats.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_stats.c @@ -117,7 +117,8 @@ static u64 ionic_sw_stats_get_count(struct ionic_lif *lif) /* rx stats */ total += MAX_Q(lif) * IONIC_NUM_RX_STATS; - if (test_bit(IONIC_LIF_SW_DEBUG_STATS, lif->state)) { + if (test_bit(IONIC_LIF_UP, lif->state) && + test_bit(IONIC_LIF_SW_DEBUG_STATS, lif->state)) { /* tx debug stats */ total += MAX_Q(lif) * (IONIC_NUM_DBG_CQ_STATS + IONIC_NUM_TX_Q_STATS + @@ -149,7 +150,8 @@ static void ionic_sw_stats_get_strings(struct ionic_lif *lif, u8 **buf) *buf += ETH_GSTRING_LEN; } - if (test_bit(IONIC_LIF_SW_DEBUG_STATS, lif->state)) { + if (test_bit(IONIC_LIF_UP, lif->state) && + test_bit(IONIC_LIF_SW_DEBUG_STATS, lif->state)) { for (i = 0; i < IONIC_NUM_TX_Q_STATS; i++) { snprintf(*buf, ETH_GSTRING_LEN, "txq_%d_%s", @@ -187,7 +189,8 @@ static void ionic_sw_stats_get_strings(struct ionic_lif *lif, u8 **buf) *buf += ETH_GSTRING_LEN; } - if (test_bit(IONIC_LIF_SW_DEBUG_STATS, lif->state)) { + if (test_bit(IONIC_LIF_UP, lif->state) && + test_bit(IONIC_LIF_SW_DEBUG_STATS, lif->state)) { for (i = 0; i < IONIC_NUM_DBG_CQ_STATS; i++) { snprintf(*buf, ETH_GSTRING_LEN, "rxq_%d_cq_%s", @@ -223,6 +226,8 @@ static void ionic_sw_stats_get_values(struct ionic_lif *lif, u64 **buf) { struct ionic_lif_sw_stats lif_stats; struct ionic_qcq *txqcq, *rxqcq; + struct ionic_tx_stats *txstats; + struct ionic_rx_stats *rxstats; int i, q_num; ionic_get_lif_stats(lif, &lif_stats); @@ -233,15 +238,17 @@ static void ionic_sw_stats_get_values(struct ionic_lif *lif, u64 **buf) } for (q_num = 0; q_num < MAX_Q(lif); q_num++) { - txqcq = lif_to_txqcq(lif, q_num); + txstats = &lif_to_txstats(lif, q_num); for (i = 0; i < IONIC_NUM_TX_STATS; i++) { - **buf = IONIC_READ_STAT64(&txqcq->stats->tx, + **buf = IONIC_READ_STAT64(txstats, &ionic_tx_stats_desc[i]); (*buf)++; } - if (test_bit(IONIC_LIF_SW_DEBUG_STATS, lif->state)) { + if (test_bit(IONIC_LIF_UP, lif->state) && + test_bit(IONIC_LIF_SW_DEBUG_STATS, lif->state)) { + txqcq = lif_to_txqcq(lif, q_num); for (i = 0; i < IONIC_NUM_TX_Q_STATS; i++) { **buf = IONIC_READ_STAT64(&txqcq->q, &ionic_txq_stats_desc[i]); @@ -258,22 +265,24 @@ static void ionic_sw_stats_get_values(struct ionic_lif *lif, u64 **buf) (*buf)++; } for (i = 0; i < IONIC_MAX_NUM_SG_CNTR; i++) { - **buf = txqcq->stats->tx.sg_cntr[i]; + **buf = txstats->sg_cntr[i]; (*buf)++; } } } for (q_num = 0; q_num < MAX_Q(lif); q_num++) { - rxqcq = lif_to_rxqcq(lif, q_num); + rxstats = &lif_to_rxstats(lif, q_num); for (i = 0; i < IONIC_NUM_RX_STATS; i++) { - **buf = IONIC_READ_STAT64(&rxqcq->stats->rx, + **buf = IONIC_READ_STAT64(rxstats, &ionic_rx_stats_desc[i]); (*buf)++; } - if (test_bit(IONIC_LIF_SW_DEBUG_STATS, lif->state)) { + if (test_bit(IONIC_LIF_UP, lif->state) && + test_bit(IONIC_LIF_SW_DEBUG_STATS, lif->state)) { + rxqcq = lif_to_rxqcq(lif, q_num); for (i = 0; i < IONIC_NUM_DBG_CQ_STATS; i++) { **buf = IONIC_READ_STAT64(&rxqcq->cq, &ionic_dbg_cq_stats_desc[i]); -- cgit v1.2.3 From 98d22b01f9f6f85eb8870290006241b316829fd3 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 2 Oct 2019 14:50:52 -0700 Subject: rt2x00: remove input-polldev.h header The driver does not use input subsystem so we do not need this header, and it is being removed, so stop pulling it in. Signed-off-by: Dmitry Torokhov Signed-off-by: Kalle Valo --- drivers/net/wireless/ralink/rt2x00/rt2x00.h | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00.h b/drivers/net/wireless/ralink/rt2x00/rt2x00.h index 2b216edd0c7d..a90a518b40d3 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h @@ -23,7 +23,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From 0041412694eca70387aee4076254fbed8222700a Mon Sep 17 00:00:00 2001 From: Alex Vesker Date: Mon, 7 Oct 2019 16:13:25 +0300 Subject: net/mlx5: DR, Allow insertion of duplicate rules Duplicate rules were not allowed to be configured with SW steering. This restriction caused failures with the replace rule logic done by upper layers. This fix allows for multiple rules with the same match values, in such case the first inserted rules will match. Fixes: 41d07074154c ("net/mlx5: DR, Expose steering rule functionality") Signed-off-by: Alex Vesker Signed-off-by: Tariq Toukan Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c index 4187f2b112b8..e8b656075c6f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c @@ -788,12 +788,10 @@ again: * it means that all the previous stes are the same, * if so, this rule is duplicated. */ - if (mlx5dr_ste_is_last_in_rule(nic_matcher, - matched_ste->ste_chain_location)) { - mlx5dr_info(dmn, "Duplicate rule inserted, aborting!!\n"); - return NULL; - } - return matched_ste; + if (!mlx5dr_ste_is_last_in_rule(nic_matcher, ste_location)) + return matched_ste; + + mlx5dr_dbg(dmn, "Duplicate rule inserted\n"); } if (!skip_rehash && dr_rule_need_enlarge_hash(cur_htbl, dmn, nic_dmn)) { -- cgit v1.2.3 From 1fee35d04a42290a3c44b8a4e3c66dbdd6180c42 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Thu, 8 Aug 2019 13:52:50 +0300 Subject: iwlwifi: don't access trans_cfg via cfg We copy cfg->trans to trans->trans_cfg at the very beginning, so don't try to access it via cfg->trans anymore, because the cfg may be unset in later cases. Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/iwl-io.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-io.h b/drivers/net/wireless/intel/iwlwifi/iwl-io.h index f8e4f0f5de0c..f09e368c7040 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-io.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-io.h @@ -112,38 +112,38 @@ int iwl_dump_fh(struct iwl_trans *trans, char **buf); */ static inline u32 iwl_umac_prph(struct iwl_trans *trans, u32 ofs) { - return ofs + trans->cfg->trans.umac_prph_offset; + return ofs + trans->trans_cfg->umac_prph_offset; } static inline u32 iwl_read_umac_prph_no_grab(struct iwl_trans *trans, u32 ofs) { return iwl_read_prph_no_grab(trans, ofs + - trans->cfg->trans.umac_prph_offset); + trans->trans_cfg->umac_prph_offset); } static inline u32 iwl_read_umac_prph(struct iwl_trans *trans, u32 ofs) { - return iwl_read_prph(trans, ofs + trans->cfg->trans.umac_prph_offset); + return iwl_read_prph(trans, ofs + trans->trans_cfg->umac_prph_offset); } static inline void iwl_write_umac_prph_no_grab(struct iwl_trans *trans, u32 ofs, u32 val) { - iwl_write_prph_no_grab(trans, ofs + trans->cfg->trans.umac_prph_offset, + iwl_write_prph_no_grab(trans, ofs + trans->trans_cfg->umac_prph_offset, val); } static inline void iwl_write_umac_prph(struct iwl_trans *trans, u32 ofs, u32 val) { - iwl_write_prph(trans, ofs + trans->cfg->trans.umac_prph_offset, val); + iwl_write_prph(trans, ofs + trans->trans_cfg->umac_prph_offset, val); } static inline int iwl_poll_umac_prph_bit(struct iwl_trans *trans, u32 addr, u32 bits, u32 mask, int timeout) { return iwl_poll_prph_bit(trans, addr + - trans->cfg->trans.umac_prph_offset, + trans->trans_cfg->umac_prph_offset, bits, mask, timeout); } -- cgit v1.2.3 From 3ed83da39aed275a5b74c74f77e85c839ad2efe9 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Fri, 23 Aug 2019 11:59:09 +0300 Subject: iwlwifi: fix ACPI table revision checks We can't check for the ACPI table revision validity in the same if where we check if the package was read correctly, because we return PTR_ERR(pkg) and if the table is not valid but the pointer is, we would return a valid pointer as an error. Fix that by moving the table checks to a separate if and return -EINVAL if it's not valid. Reported-by: Dan Carpenter Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/fw/acpi.c | 10 ++++++---- drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 24 ++++++++++++++++++------ 2 files changed, 24 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/intel/iwlwifi/fw/acpi.c b/drivers/net/wireless/intel/iwlwifi/fw/acpi.c index 7573af2d88ce..c2db758b9d54 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/acpi.c +++ b/drivers/net/wireless/intel/iwlwifi/fw/acpi.c @@ -162,12 +162,13 @@ int iwl_acpi_get_mcc(struct device *dev, char *mcc) wifi_pkg = iwl_acpi_get_wifi_pkg(dev, data, ACPI_WRDD_WIFI_DATA_SIZE, &tbl_rev); - if (IS_ERR(wifi_pkg) || tbl_rev != 0) { + if (IS_ERR(wifi_pkg)) { ret = PTR_ERR(wifi_pkg); goto out_free; } - if (wifi_pkg->package.elements[1].type != ACPI_TYPE_INTEGER) { + if (wifi_pkg->package.elements[1].type != ACPI_TYPE_INTEGER || + tbl_rev != 0) { ret = -EINVAL; goto out_free; } @@ -224,12 +225,13 @@ int iwl_acpi_get_eckv(struct device *dev, u32 *extl_clk) wifi_pkg = iwl_acpi_get_wifi_pkg(dev, data, ACPI_ECKV_WIFI_DATA_SIZE, &tbl_rev); - if (IS_ERR(wifi_pkg) || tbl_rev != 0) { + if (IS_ERR(wifi_pkg)) { ret = PTR_ERR(wifi_pkg); goto out_free; } - if (wifi_pkg->package.elements[1].type != ACPI_TYPE_INTEGER) { + if (wifi_pkg->package.elements[1].type != ACPI_TYPE_INTEGER || + tbl_rev != 0) { ret = -EINVAL; goto out_free; } diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c index 32a5e4e5461f..b2eb18eedf02 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c @@ -694,12 +694,13 @@ static int iwl_mvm_sar_get_wrds_table(struct iwl_mvm *mvm) wifi_pkg = iwl_acpi_get_wifi_pkg(mvm->dev, data, ACPI_WRDS_WIFI_DATA_SIZE, &tbl_rev); - if (IS_ERR(wifi_pkg) || tbl_rev != 0) { + if (IS_ERR(wifi_pkg)) { ret = PTR_ERR(wifi_pkg); goto out_free; } - if (wifi_pkg->package.elements[1].type != ACPI_TYPE_INTEGER) { + if (wifi_pkg->package.elements[1].type != ACPI_TYPE_INTEGER || + tbl_rev != 0) { ret = -EINVAL; goto out_free; } @@ -731,13 +732,14 @@ static int iwl_mvm_sar_get_ewrd_table(struct iwl_mvm *mvm) wifi_pkg = iwl_acpi_get_wifi_pkg(mvm->dev, data, ACPI_EWRD_WIFI_DATA_SIZE, &tbl_rev); - if (IS_ERR(wifi_pkg) || tbl_rev != 0) { + if (IS_ERR(wifi_pkg)) { ret = PTR_ERR(wifi_pkg); goto out_free; } if ((wifi_pkg->package.elements[1].type != ACPI_TYPE_INTEGER) || - (wifi_pkg->package.elements[2].type != ACPI_TYPE_INTEGER)) { + (wifi_pkg->package.elements[2].type != ACPI_TYPE_INTEGER) || + tbl_rev != 0) { ret = -EINVAL; goto out_free; } @@ -791,11 +793,16 @@ static int iwl_mvm_sar_get_wgds_table(struct iwl_mvm *mvm) wifi_pkg = iwl_acpi_get_wifi_pkg(mvm->dev, data, ACPI_WGDS_WIFI_DATA_SIZE, &tbl_rev); - if (IS_ERR(wifi_pkg) || tbl_rev > 1) { + if (IS_ERR(wifi_pkg)) { ret = PTR_ERR(wifi_pkg); goto out_free; } + if (tbl_rev != 0) { + ret = -EINVAL; + goto out_free; + } + mvm->geo_rev = tbl_rev; for (i = 0; i < ACPI_NUM_GEO_PROFILES; i++) { for (j = 0; j < ACPI_GEO_TABLE_SIZE; j++) { @@ -1020,11 +1027,16 @@ static int iwl_mvm_get_ppag_table(struct iwl_mvm *mvm) wifi_pkg = iwl_acpi_get_wifi_pkg(mvm->dev, data, ACPI_PPAG_WIFI_DATA_SIZE, &tbl_rev); - if (IS_ERR(wifi_pkg) || tbl_rev != 0) { + if (IS_ERR(wifi_pkg)) { ret = PTR_ERR(wifi_pkg); goto out_free; } + if (tbl_rev != 0) { + ret = -EINVAL; + goto out_free; + } + enabled = &wifi_pkg->package.elements[1]; if (enabled->type != ACPI_TYPE_INTEGER || (enabled->integer.value != 0 && enabled->integer.value != 1)) { -- cgit v1.2.3 From a4584729291c71c5c14718ff00ea6c5f971c45b2 Mon Sep 17 00:00:00 2001 From: Haim Dreyfuss Date: Mon, 12 Aug 2019 13:25:42 +0300 Subject: iwlwifi: mvm: force single phy init The PHY is initialized during device initialization, but devices with the tx_siso_diversity flag set need to send PHY_CONFIGURATION_CMD first, otherwise the PHY would be reinitialized, causing a SYSASSERT. To fix this, use a bit that tells the FW not to complete the PHY initialization before a PHY_CONFIGURATION_CMD is received. Signed-off-by: Haim Dreyfuss Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c index b2eb18eedf02..0d2229319261 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c @@ -420,6 +420,9 @@ static int iwl_run_unified_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) }; int ret; + if (mvm->trans->cfg->tx_with_siso_diversity) + init_cfg.init_flags |= cpu_to_le32(BIT(IWL_INIT_PHY)); + lockdep_assert_held(&mvm->mutex); mvm->rfkill_safe_init_done = false; -- cgit v1.2.3 From a2113cc44d4387a7c3ef3a9082d273524f9230ac Mon Sep 17 00:00:00 2001 From: Naftali Goldstein Date: Mon, 9 Sep 2019 13:11:04 +0300 Subject: iwlwifi: mvm: fix race in sync rx queue notification Consider the following flow: 1. Driver starts to sync the rx queues due to a delba. mvm->queue_sync_cookie=1. This rx-queues-sync is synchronous, so it doesn't increment the cookie until all rx queues handle the notification from FW. 2. During this time, driver starts to sync rx queues due to nssn sync required. The cookie's value is still 1, but it doesn't matter since this rx-queue-sync is non-synchronous so in the notification handler the cookie is ignored. What _does_ matter is that this flow increments the cookie to 2 immediately. Remember though that the FW won't start servicing this command until it's done with the previous one. 3. FW is still handling the first command, so it sends a notification with internal_notif->sync=1, and internal_notif->cookie=0, which triggers a WARN_ONCE. The solution for this race is to only use the mvm->queue_sync_cookie in case of a synchronous sync-rx-queues. This way in step 2 the cookie's value won't change so we avoid the WARN. The commit in the "fixes" field is the first commit to introduce non-synchronous sending of this command to FW. Fixes: 3c514bf831ac ("iwlwifi: mvm: add a loose synchronization of the NSSN across Rx queues") Signed-off-by: Naftali Goldstein Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index cd1b10042fbf..d31f96c3f925 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -4881,11 +4881,11 @@ void iwl_mvm_sync_rx_queues_internal(struct iwl_mvm *mvm, if (!iwl_mvm_has_new_rx_api(mvm)) return; - notif->cookie = mvm->queue_sync_cookie; - - if (notif->sync) + if (notif->sync) { + notif->cookie = mvm->queue_sync_cookie; atomic_set(&mvm->queue_sync_counter, mvm->trans->num_rx_queues); + } ret = iwl_mvm_notify_rx_queue(mvm, qmask, (u8 *)notif, size, !notif->sync); @@ -4905,7 +4905,8 @@ void iwl_mvm_sync_rx_queues_internal(struct iwl_mvm *mvm, out: atomic_set(&mvm->queue_sync_counter, 0); - mvm->queue_sync_cookie++; + if (notif->sync) + mvm->queue_sync_cookie++; } static void iwl_mvm_sync_rx_queues(struct ieee80211_hw *hw) -- cgit v1.2.3 From 08326a97afbe808e50e1610c2835fa2747bdb908 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 4 Sep 2019 16:23:27 +0200 Subject: iwlwifi: pcie: fix indexing in command dump for new HW We got a crash in iwl_trans_pcie_get_cmdlen(), while the TFD was being accessed to sum up the lengths. We want to access the TFD here, which is the information for the hardware. We always only allocate 32 buffers for the cmd queue, but on newer hardware (using TFH) we can also allocate only a shorter hardware array, also only 32 TFDs. Prior to the TFH, we had to allocate a bigger TFD array but would make those point to a smaller set of buffers. Additionally, now max_tfd_queue_size is up to 65536, so we can access *way* out of bounds of a really only 32-entry array, so it crashes. Fix this by making the TFD index depend on which hardware we are using right now. While changing the calculation, also fix it to not use void ptr arithmetic, but cast to u8 * before. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c index f8a1f985a1d8..ab7480a85015 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c @@ -3272,11 +3272,17 @@ static struct iwl_trans_dump_data ptr = cmdq->write_ptr; for (i = 0; i < cmdq->n_window; i++) { u8 idx = iwl_pcie_get_cmd_index(cmdq, ptr); + u8 tfdidx; u32 caplen, cmdlen; + if (trans->trans_cfg->use_tfh) + tfdidx = idx; + else + tfdidx = ptr; + cmdlen = iwl_trans_pcie_get_cmdlen(trans, - cmdq->tfds + - tfd_size * ptr); + (u8 *)cmdq->tfds + + tfd_size * tfdidx); caplen = min_t(u32, TFD_MAX_PAYLOAD_SIZE, cmdlen); if (cmdlen) { -- cgit v1.2.3 From 8188a18ee2e48c9a7461139838048363bfce3fef Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 19 Sep 2019 09:04:09 +0200 Subject: iwlwifi: pcie: fix rb_allocator workqueue allocation We don't handle failures in the rb_allocator workqueue allocation correctly. To fix that, move the code earlier so the cleanup is easier and we don't have to undo all the interrupt allocations in this case. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c index ab7480a85015..6961f00ff812 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c @@ -3456,6 +3456,15 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, spin_lock_init(&trans_pcie->reg_lock); mutex_init(&trans_pcie->mutex); init_waitqueue_head(&trans_pcie->ucode_write_waitq); + + trans_pcie->rba.alloc_wq = alloc_workqueue("rb_allocator", + WQ_HIGHPRI | WQ_UNBOUND, 1); + if (!trans_pcie->rba.alloc_wq) { + ret = -ENOMEM; + goto out_free_trans; + } + INIT_WORK(&trans_pcie->rba.rx_alloc, iwl_pcie_rx_allocator_work); + trans_pcie->tso_hdr_page = alloc_percpu(struct iwl_tso_hdr_page); if (!trans_pcie->tso_hdr_page) { ret = -ENOMEM; @@ -3590,10 +3599,6 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, trans_pcie->inta_mask = CSR_INI_SET_MASK; } - trans_pcie->rba.alloc_wq = alloc_workqueue("rb_allocator", - WQ_HIGHPRI | WQ_UNBOUND, 1); - INIT_WORK(&trans_pcie->rba.rx_alloc, iwl_pcie_rx_allocator_work); - #ifdef CONFIG_IWLWIFI_DEBUGFS trans_pcie->fw_mon_data.state = IWL_FW_MON_DBGFS_STATE_CLOSED; mutex_init(&trans_pcie->fw_mon_data.mutex); @@ -3605,6 +3610,8 @@ out_free_ict: iwl_pcie_free_ict(trans); out_no_pci: free_percpu(trans_pcie->tso_hdr_page); + destroy_workqueue(trans_pcie->rba.alloc_wq); +out_free_trans: iwl_trans_free(trans); return ERR_PTR(ret); } -- cgit v1.2.3 From b4b814fec1a5a849383f7b3886b654a13abbda7d Mon Sep 17 00:00:00 2001 From: Navid Emamdoost Date: Thu, 12 Sep 2019 23:23:27 -0500 Subject: iwlwifi: dbg_ini: fix memory leak in alloc_sgtable In alloc_sgtable if alloc_page fails, the alocated table should be released. Signed-off-by: Navid Emamdoost Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/fw/dbg.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c index 5c8602de9168..87421807e040 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c +++ b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c @@ -646,6 +646,7 @@ static struct scatterlist *alloc_sgtable(int size) if (new_page) __free_page(new_page); } + kfree(table); return NULL; } alloc_size = min_t(int, size, PAGE_SIZE); -- cgit v1.2.3 From 0f4f199443faca715523b0659aa536251d8b978f Mon Sep 17 00:00:00 2001 From: Navid Emamdoost Date: Fri, 27 Sep 2019 15:56:04 -0500 Subject: iwlwifi: pcie: fix memory leaks in iwl_pcie_ctxt_info_gen3_init In iwl_pcie_ctxt_info_gen3_init there are cases that the allocated dma memory is leaked in case of error. DMA memories prph_scratch, prph_info, and ctxt_info_gen3 are allocated and initialized to be later assigned to trans_pcie. But in any error case before such assignment the allocated memories should be released. First of such error cases happens when iwl_pcie_init_fw_sec fails. Current implementation correctly releases prph_scratch. But in two sunsequent error cases where dma_alloc_coherent may fail, such releases are missing. This commit adds release for prph_scratch when allocation for prph_info fails, and adds releases for prph_scratch and prph_info when allocation for ctxt_info_gen3 fails. Fixes: 2ee824026288 ("iwlwifi: pcie: support context information for 22560 devices") Signed-off-by: Navid Emamdoost Signed-off-by: Luca Coelho --- .../wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c | 36 +++++++++++++++------- 1 file changed, 25 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c b/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c index 75fa8a6aafee..74980382e64c 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c @@ -107,13 +107,9 @@ int iwl_pcie_ctxt_info_gen3_init(struct iwl_trans *trans, /* allocate ucode sections in dram and set addresses */ ret = iwl_pcie_init_fw_sec(trans, fw, &prph_scratch->dram); - if (ret) { - dma_free_coherent(trans->dev, - sizeof(*prph_scratch), - prph_scratch, - trans_pcie->prph_scratch_dma_addr); - return ret; - } + if (ret) + goto err_free_prph_scratch; + /* Allocate prph information * currently we don't assign to the prph info anything, but it would get @@ -121,16 +117,20 @@ int iwl_pcie_ctxt_info_gen3_init(struct iwl_trans *trans, prph_info = dma_alloc_coherent(trans->dev, sizeof(*prph_info), &trans_pcie->prph_info_dma_addr, GFP_KERNEL); - if (!prph_info) - return -ENOMEM; + if (!prph_info) { + ret = -ENOMEM; + goto err_free_prph_scratch; + } /* Allocate context info */ ctxt_info_gen3 = dma_alloc_coherent(trans->dev, sizeof(*ctxt_info_gen3), &trans_pcie->ctxt_info_dma_addr, GFP_KERNEL); - if (!ctxt_info_gen3) - return -ENOMEM; + if (!ctxt_info_gen3) { + ret = -ENOMEM; + goto err_free_prph_info; + } ctxt_info_gen3->prph_info_base_addr = cpu_to_le64(trans_pcie->prph_info_dma_addr); @@ -186,6 +186,20 @@ int iwl_pcie_ctxt_info_gen3_init(struct iwl_trans *trans, iwl_set_bit(trans, CSR_GP_CNTRL, CSR_AUTO_FUNC_INIT); return 0; + +err_free_prph_info: + dma_free_coherent(trans->dev, + sizeof(*prph_info), + prph_info, + trans_pcie->prph_info_dma_addr); + +err_free_prph_scratch: + dma_free_coherent(trans->dev, + sizeof(*prph_scratch), + prph_scratch, + trans_pcie->prph_scratch_dma_addr); + return ret; + } void iwl_pcie_ctxt_info_gen3_free(struct iwl_trans *trans) -- cgit v1.2.3 From 12e36d98d3e5acf5fc57774e0a15906d55f30cb9 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Tue, 8 Oct 2019 13:10:53 +0300 Subject: iwlwifi: exclude GEO SAR support for 3168 We currently support two NICs in FW version 29, namely 7265D and 3168. Out of these, only 7265D supports GEO SAR, so adjust the function that checks for it accordingly. Signed-off-by: Luca Coelho Fixes: f5a47fae6aa3 ("iwlwifi: mvm: fix version check for GEO_TX_POWER_LIMIT support") Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c index 0d2229319261..d9eb2b286438 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c @@ -899,15 +899,17 @@ static bool iwl_mvm_sar_geo_support(struct iwl_mvm *mvm) * firmware versions. Unfortunately, we don't have a TLV API * flag to rely on, so rely on the major version which is in * the first byte of ucode_ver. This was implemented - * initially on version 38 and then backported to29 and 17. - * The intention was to have it in 36 as well, but not all - * 8000 family got this feature enabled. The 8000 family is - * the only one using version 36, so skip this version - * entirely. + * initially on version 38 and then backported to 17. It was + * also backported to 29, but only for 7265D devices. The + * intention was to have it in 36 as well, but not all 8000 + * family got this feature enabled. The 8000 family is the + * only one using version 36, so skip this version entirely. */ return IWL_UCODE_SERIAL(mvm->fw->ucode_ver) >= 38 || - IWL_UCODE_SERIAL(mvm->fw->ucode_ver) == 29 || - IWL_UCODE_SERIAL(mvm->fw->ucode_ver) == 17; + IWL_UCODE_SERIAL(mvm->fw->ucode_ver) == 17 || + (IWL_UCODE_SERIAL(mvm->fw->ucode_ver) == 29 && + ((mvm->trans->hw_rev & CSR_HW_REV_TYPE_MSK) == + CSR_HW_REV_TYPE_7265D)); } int iwl_mvm_get_sar_geo_profile(struct iwl_mvm *mvm) -- cgit v1.2.3 From aa0cc7dde17bb6b8cc533bbcfe3f53d70e0dd269 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Tue, 8 Oct 2019 13:21:02 +0300 Subject: iwlwifi: pcie: change qu with jf devices to use qu configuration There were a bunch of devices with qu and jf that were loading the configuration with pu and jf, which is wrong. Fix them all accordingly. Additionally, remove 0x1010 and 0x1210 subsytem IDs from the list, since they are obviously wrong, and 0x0044 and 0x0244, which were duplicate. Cc: stable@vger.kernel.org # 5.1+ Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 274 +++++++++++++------------- 1 file changed, 137 insertions(+), 137 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c index e29c47744ef5..6f4bb7ce71a5 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c @@ -513,31 +513,33 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x24FD, 0x9074, iwl8265_2ac_cfg)}, /* 9000 Series */ - {IWL_PCI_DEVICE(0x02F0, 0x0030, iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x0034, iwl9560_2ac_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x0038, iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x003C, iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x0060, iwl9461_2ac_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x0064, iwl9461_2ac_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x00A0, iwl9462_2ac_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x00A4, iwl9462_2ac_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x0230, iwl9560_2ac_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x0234, iwl9560_2ac_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x0238, iwl9560_2ac_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x023C, iwl9560_2ac_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x0260, iwl9461_2ac_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x0264, iwl9461_2ac_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x02A0, iwl9462_2ac_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x02A4, iwl9462_2ac_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x1551, iwl9560_killer_s_2ac_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x1552, iwl9560_killer_i_2ac_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x2030, iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x2034, iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x4030, iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x4034, iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x40A4, iwl9462_2ac_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x4234, iwl9560_2ac_cfg_quz_a0_jf_b0_soc)}, - {IWL_PCI_DEVICE(0x02F0, 0x42A4, iwl9462_2ac_cfg_quz_a0_jf_b0_soc)}, + {IWL_PCI_DEVICE(0x02F0, 0x0030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x0034, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x0038, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x003C, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x0060, iwl9461_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x0064, iwl9461_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x00A0, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x00A4, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x0230, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x0234, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x0238, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x023C, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x0260, iwl9461_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x0264, iwl9461_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x02A0, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x02A4, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x1030, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x1551, killer1550s_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x1552, killer1550i_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x2030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x2034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x4030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x4034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x40A4, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x4234, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x02F0, 0x42A4, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x06F0, 0x0030, iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc)}, {IWL_PCI_DEVICE(0x06F0, 0x0034, iwl9560_2ac_cfg_quz_a0_jf_b0_soc)}, {IWL_PCI_DEVICE(0x06F0, 0x0038, iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc)}, @@ -643,34 +645,34 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x2720, 0x40A4, iwl9462_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x2720, 0x4234, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x2720, 0x42A4, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x0030, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x0034, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x0038, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x003C, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x0060, iwl9460_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x0064, iwl9461_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x00A0, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x00A4, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x0230, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x0234, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x0238, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x023C, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x0260, iwl9461_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x0264, iwl9461_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x02A0, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x02A4, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x1010, iwl9260_2ac_cfg)}, - {IWL_PCI_DEVICE(0x30DC, 0x1030, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x1210, iwl9260_2ac_cfg)}, - {IWL_PCI_DEVICE(0x30DC, 0x1551, iwl9560_killer_s_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x1552, iwl9560_killer_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x2030, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x2034, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x4030, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x4034, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x40A4, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x4234, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x30DC, 0x42A4, iwl9462_2ac_cfg_soc)}, + + {IWL_PCI_DEVICE(0x30DC, 0x0030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x0034, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x0038, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x003C, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x0060, iwl9461_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x0064, iwl9461_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x00A0, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x00A4, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x0230, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x0234, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x0238, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x023C, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x0260, iwl9461_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x0264, iwl9461_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x02A0, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x02A4, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x1030, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x1551, killer1550s_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x1552, killer1550i_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x2030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x2034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x4030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x4034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x40A4, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x4234, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x30DC, 0x42A4, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x31DC, 0x0030, iwl9560_2ac_160_cfg_shared_clk)}, {IWL_PCI_DEVICE(0x31DC, 0x0034, iwl9560_2ac_cfg_shared_clk)}, {IWL_PCI_DEVICE(0x31DC, 0x0038, iwl9560_2ac_160_cfg_shared_clk)}, @@ -726,62 +728,60 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x34F0, 0x4234, iwl9560_2ac_cfg_qu_b0_jf_b0)}, {IWL_PCI_DEVICE(0x34F0, 0x42A4, iwl9462_2ac_cfg_qu_b0_jf_b0)}, - {IWL_PCI_DEVICE(0x3DF0, 0x0030, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x0034, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x0038, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x003C, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x0060, iwl9461_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x0064, iwl9461_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x00A0, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x00A4, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x0230, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x0234, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x0238, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x023C, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x0260, iwl9461_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x0264, iwl9461_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x02A0, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x02A4, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x1010, iwl9260_2ac_cfg)}, - {IWL_PCI_DEVICE(0x3DF0, 0x1030, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x1210, iwl9260_2ac_cfg)}, - {IWL_PCI_DEVICE(0x3DF0, 0x1551, iwl9560_killer_s_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x1552, iwl9560_killer_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x2030, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x2034, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x4030, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x4034, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x40A4, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x4234, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x3DF0, 0x42A4, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x0030, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x0034, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x0038, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x003C, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x0060, iwl9461_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x0064, iwl9461_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x00A0, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x00A4, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x0230, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x0234, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x0238, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x023C, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x0260, iwl9461_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x0264, iwl9461_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x02A0, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x02A4, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x1010, iwl9260_2ac_cfg)}, - {IWL_PCI_DEVICE(0x43F0, 0x1030, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x1210, iwl9260_2ac_cfg)}, - {IWL_PCI_DEVICE(0x43F0, 0x1551, iwl9560_killer_s_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x1552, iwl9560_killer_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x2030, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x2034, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x4030, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x4034, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x40A4, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x4234, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0x43F0, 0x42A4, iwl9462_2ac_cfg_soc)}, + {IWL_PCI_DEVICE(0x3DF0, 0x0030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x0034, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x0038, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x003C, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x0060, iwl9461_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x0064, iwl9461_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x00A0, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x00A4, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x0230, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x0234, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x0238, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x023C, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x0260, iwl9461_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x0264, iwl9461_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x02A0, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x02A4, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x1030, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x1551, killer1550s_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x1552, killer1550i_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x2030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x2034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x4030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x4034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x40A4, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x4234, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x3DF0, 0x42A4, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + + {IWL_PCI_DEVICE(0x43F0, 0x0030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x0034, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x0038, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x003C, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x0060, iwl9461_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x0064, iwl9461_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x00A0, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x00A4, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x0230, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x0234, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x0238, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x023C, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x0260, iwl9461_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x0264, iwl9461_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x02A0, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x02A4, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x1030, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x1551, killer1550s_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x1552, killer1550i_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x2030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x2034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x4030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x4034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x40A4, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x4234, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x43F0, 0x42A4, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0x9DF0, 0x0000, iwl9460_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x9DF0, 0x0010, iwl9460_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x9DF0, 0x0030, iwl9560_2ac_160_cfg_soc)}, @@ -821,34 +821,34 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x9DF0, 0x40A4, iwl9462_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x9DF0, 0x4234, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x9DF0, 0x42A4, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x0030, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x0034, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x0038, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x003C, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x0060, iwl9461_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x0064, iwl9461_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x00A0, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x00A4, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x0230, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x0234, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x0238, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x023C, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x0260, iwl9461_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x0264, iwl9461_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x02A0, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x02A4, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x1010, iwl9260_2ac_cfg)}, - {IWL_PCI_DEVICE(0xA0F0, 0x1030, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x1210, iwl9260_2ac_cfg)}, - {IWL_PCI_DEVICE(0xA0F0, 0x1551, iwl9560_killer_s_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x1552, iwl9560_killer_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x2030, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x2034, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x4030, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x4034, iwl9560_2ac_160_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x40A4, iwl9462_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x4234, iwl9560_2ac_cfg_soc)}, - {IWL_PCI_DEVICE(0xA0F0, 0x42A4, iwl9462_2ac_cfg_soc)}, + + {IWL_PCI_DEVICE(0xA0F0, 0x0030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x0034, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x0038, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x003C, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x0060, iwl9461_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x0064, iwl9461_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x00A0, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x00A4, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x0230, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x0234, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x0238, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x023C, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x0260, iwl9461_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x0264, iwl9461_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x02A0, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x02A4, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x1030, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x1551, killer1550s_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x1552, killer1550i_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x2030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x2034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x4030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x4034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x40A4, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x4234, iwl9560_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA0F0, 0x42A4, iwl9462_2ac_cfg_qu_b0_jf_b0)}, + {IWL_PCI_DEVICE(0xA370, 0x0030, iwl9560_2ac_160_cfg_soc)}, {IWL_PCI_DEVICE(0xA370, 0x0034, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0xA370, 0x0038, iwl9560_2ac_160_cfg_soc)}, -- cgit v1.2.3 From 5da202c88f8c355ad79bc2e8eb582e6d433060e7 Mon Sep 17 00:00:00 2001 From: Antonio Borneo Date: Mon, 7 Oct 2019 17:43:04 +0200 Subject: net: stmmac: fix length of PTP clock's name string The field "name" in struct ptp_clock_info has a fixed size of 16 chars and is used as zero terminated string by clock_name_show() in drivers/ptp/ptp_sysfs.c The current initialization value requires 17 chars to fit also the null termination, and this causes overflow to the next bytes in the struct when the string is read as null terminated: hexdump -C /sys/class/ptp/ptp0/clock_name 00000000 73 74 6d 6d 61 63 5f 70 74 70 5f 63 6c 6f 63 6b |stmmac_ptp_clock| 00000010 a0 ac b9 03 0a |.....| where the extra 4 bytes (excluding the newline) after the string represent the integer 0x03b9aca0 = 62500000 assigned to the field "max_adj" that follows "name" in the same struct. There is no strict requirement for the "name" content and in the comment in ptp_clock_kernel.h it's reported it should just be 'A short "friendly name" to identify the clock'. Replace it with "stmmac ptp". Signed-off-by: Antonio Borneo Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver") Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c index 173493db038c..df638b18b72c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c @@ -164,7 +164,7 @@ static int stmmac_enable(struct ptp_clock_info *ptp, /* structure describing a PTP hardware clock */ static struct ptp_clock_info stmmac_ptp_clock_ops = { .owner = THIS_MODULE, - .name = "stmmac_ptp_clock", + .name = "stmmac ptp", .max_adj = 62500000, .n_alarm = 0, .n_ext_ts = 0, -- cgit v1.2.3 From 520cf6002147281d1e7b522bb338416b623dcb93 Mon Sep 17 00:00:00 2001 From: Antonio Borneo Date: Mon, 7 Oct 2019 17:43:05 +0200 Subject: net: stmmac: fix disabling flexible PPS output Accordingly to Synopsys documentation [1] and [2], when bit PPSEN0 in register MAC_PPS_CONTROL is set it selects the functionality command in the same register, otherwise selects the functionality control. Command functionality is required to either enable (command 0x2) and disable (command 0x5) the flexible PPS output, but the bit PPSEN0 is currently set only for enabling. Set the bit PPSEN0 to properly disable flexible PPS output. Tested on STM32MP15x, based on dwmac 4.10a. [1] DWC Ethernet QoS Databook 4.10a October 2014 [2] DWC Ethernet QoS Databook 5.00a September 2017 Signed-off-by: Antonio Borneo Fixes: 9a8a02c9d46d ("net: stmmac: Add Flexible PPS support") Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c index 3f4f3132e16b..e436fa160c7d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c @@ -515,6 +515,7 @@ int dwmac5_flex_pps_config(void __iomem *ioaddr, int index, if (!enable) { val |= PPSCMDx(index, 0x5); + val |= PPSEN0; writel(val, ioaddr + MAC_PPS_CONTROL); return 0; } -- cgit v1.2.3 From a7137534b597b7c303203e6bc3ed87e87a273bb8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 7 Oct 2019 15:43:01 -0700 Subject: bonding: fix potential NULL deref in bond_update_slave_arr syzbot got a NULL dereference in bond_update_slave_arr() [1], happening after a failure to allocate bond->slave_arr A workqueue (bond_slave_arr_handler) is supposed to retry the allocation later, but if the slave is removed before the workqueue had a chance to complete, bond->slave_arr can still be NULL. [1] Failed to build slave-array. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI Modules linked in: Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:bond_update_slave_arr.cold+0xc6/0x198 drivers/net/bonding/bond_main.c:4039 RSP: 0018:ffff88018fe33678 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc9000290b000 RDX: 0000000000000000 RSI: ffffffff82b63037 RDI: ffff88019745ea20 RBP: ffff88018fe33760 R08: ffff880170754280 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88019745ea00 R14: 0000000000000000 R15: ffff88018fe338b0 FS: 00007febd837d700(0000) GS:ffff8801dad00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004540a0 CR3: 00000001c242e005 CR4: 00000000001626f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [] __bond_release_one+0x43e/0x500 drivers/net/bonding/bond_main.c:1923 [] bond_release drivers/net/bonding/bond_main.c:2039 [inline] [] bond_do_ioctl+0x416/0x870 drivers/net/bonding/bond_main.c:3562 [] dev_ifsioc+0x6f4/0x940 net/core/dev_ioctl.c:328 [] dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:495 [] sock_do_ioctl+0x1bd/0x300 net/socket.c:1088 [] sock_ioctl+0x300/0x5d0 net/socket.c:1196 [] vfs_ioctl fs/ioctl.c:47 [inline] [] file_ioctl fs/ioctl.c:501 [inline] [] do_vfs_ioctl+0xacb/0x1300 fs/ioctl.c:688 [] SYSC_ioctl fs/ioctl.c:705 [inline] [] SyS_ioctl+0xb6/0xe0 fs/ioctl.c:696 [] do_syscall_64+0x528/0x770 arch/x86/entry/common.c:305 [] entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: ee6377147409 ("bonding: Simplify the xmit function for modes that use xmit_hash") Signed-off-by: Eric Dumazet Reported-by: syzbot Cc: Mahesh Bandewar Signed-off-by: Jakub Kicinski --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 931d9d935686..21d8fcc83c9c 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4039,7 +4039,7 @@ out: * this to-be-skipped slave to send a packet out. */ old_arr = rtnl_dereference(bond->slave_arr); - for (idx = 0; idx < old_arr->count; idx++) { + for (idx = 0; old_arr != NULL && idx < old_arr->count; idx++) { if (skipslave == old_arr->arr[idx]) { old_arr->arr[idx] = old_arr->arr[old_arr->count-1]; -- cgit v1.2.3 From 9db74e51ec08d75c3e97f851299bc25e645cc5ad Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 8 Oct 2019 08:39:04 -0700 Subject: phylink: fix kernel-doc warnings Fix kernel-doc warnings in phylink.c: ../drivers/net/phy/phylink.c:595: warning: Function parameter or member 'config' not described in 'phylink_create' ../drivers/net/phy/phylink.c:595: warning: Excess function parameter 'ndev' description in 'phylink_create' Fixes: 8796c8923d9c ("phylink: add documentation for kernel APIs") Signed-off-by: Randy Dunlap Cc: Russell King Signed-off-by: Jakub Kicinski --- drivers/net/phy/phylink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index a5a57ca94c1a..20e2ebe458f2 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -576,7 +576,7 @@ static int phylink_register_sfp(struct phylink *pl, /** * phylink_create() - create a phylink instance - * @ndev: a pointer to the &struct net_device + * @config: a pointer to the target &struct phylink_config * @fwnode: a pointer to a &struct fwnode_handle describing the network * interface * @iface: the desired link mode defined by &typedef phy_interface_t -- cgit v1.2.3 From e0ae2c578d3909e60e9448207f5d83f785f1129f Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Wed, 9 Oct 2019 11:07:18 +0200 Subject: net: usb: qmi_wwan: add Telit 0x1050 composition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds support for Telit FN980 0x1050 composition 0x1050: tty, adb, rmnet, tty, tty, tty, tty Signed-off-by: Daniele Palmas Acked-by: Bjørn Mork Signed-off-by: Jakub Kicinski --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 3d77cd402ba9..596428ec71df 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1327,6 +1327,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ {QMI_FIXED_INTF(0x2357, 0x9000, 4)}, /* TP-LINK MA260 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)}, /* Telit LE922A */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x1050, 2)}, /* Telit FN980 */ {QMI_FIXED_INTF(0x1bc7, 0x1100, 3)}, /* Telit ME910 */ {QMI_FIXED_INTF(0x1bc7, 0x1101, 3)}, /* Telit ME910 dual modem */ {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */ -- cgit v1.2.3 From 4ffdd22e49f47db543906d75453a0048a53071ab Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 9 Oct 2019 09:20:02 -0700 Subject: tun: remove possible false sharing in tun_flow_update() As mentioned in https://github.com/google/ktsan/wiki/READ_ONCE-and-WRITE_ONCE#it-may-improve-performance a C compiler can legally transform if (e->queue_index != queue_index) e->queue_index = queue_index; to : e->queue_index = queue_index; Note that the code using jiffies has no issue, since jiffies has volatile attribute. if (e->updated != jiffies) e->updated = jiffies; Fixes: 83b1bc122cab ("tun: align write-heavy flow entry members to a cache line") Signed-off-by: Eric Dumazet Cc: Zhang Yu Cc: Wang Li Cc: Li RongQing Acked-by: Jason Wang Signed-off-by: Jakub Kicinski --- drivers/net/tun.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 812dc3a65efb..a8d3141582a5 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -526,8 +526,8 @@ static void tun_flow_update(struct tun_struct *tun, u32 rxhash, e = tun_flow_find(head, rxhash); if (likely(e)) { /* TODO: keep queueing to old queue until it's empty? */ - if (e->queue_index != queue_index) - e->queue_index = queue_index; + if (READ_ONCE(e->queue_index) != queue_index) + WRITE_ONCE(e->queue_index, queue_index); if (e->updated != jiffies) e->updated = jiffies; sock_rps_record_flow_hash(e->rps_rxhash); -- cgit v1.2.3 From 4ebcb113edcc498888394821bca2e60ef89c6ff3 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Wed, 9 Oct 2019 20:55:48 +0200 Subject: r8169: fix jumbo packet handling on resume from suspend Mariusz reported that invalid packets are sent after resume from suspend if jumbo packets are active. It turned out that his BIOS resets chip settings to non-jumbo on resume. Most chip settings are re-initialized on resume from suspend by calling rtl_hw_start(), so let's add configuring jumbo to this function. There's nothing wrong with the commit marked as fixed, it's just the first one where the patch applies cleanly. Fixes: 7366016d2d4c ("r8169: read common register for PCI commit") Reported-by: Mariusz Bialonczyk Tested-by: Mariusz Bialonczyk Signed-off-by: Heiner Kallweit Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/realtek/r8169_main.c | 35 ++++++++++--------------------- 1 file changed, 11 insertions(+), 24 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index 74f81fe03810..350b0d949611 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -4146,6 +4146,14 @@ static void rtl_hw_jumbo_disable(struct rtl8169_private *tp) rtl_lock_config_regs(tp); } +static void rtl_jumbo_config(struct rtl8169_private *tp, int mtu) +{ + if (mtu > ETH_DATA_LEN) + rtl_hw_jumbo_enable(tp); + else + rtl_hw_jumbo_disable(tp); +} + DECLARE_RTL_COND(rtl_chipcmd_cond) { return RTL_R8(tp, ChipCmd) & CmdReset; @@ -4442,11 +4450,6 @@ static void rtl8168g_set_pause_thresholds(struct rtl8169_private *tp, static void rtl_hw_start_8168bb(struct rtl8169_private *tp) { RTL_W8(tp, Config3, RTL_R8(tp, Config3) & ~Beacon_en); - - if (tp->dev->mtu <= ETH_DATA_LEN) { - rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B | - PCI_EXP_DEVCTL_NOSNOOP_EN); - } } static void rtl_hw_start_8168bef(struct rtl8169_private *tp) @@ -4462,9 +4465,6 @@ static void __rtl_hw_start_8168cp(struct rtl8169_private *tp) RTL_W8(tp, Config3, RTL_R8(tp, Config3) & ~Beacon_en); - if (tp->dev->mtu <= ETH_DATA_LEN) - rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B); - rtl_disable_clock_request(tp); } @@ -4490,9 +4490,6 @@ static void rtl_hw_start_8168cp_2(struct rtl8169_private *tp) rtl_set_def_aspm_entry_latency(tp); RTL_W8(tp, Config3, RTL_R8(tp, Config3) & ~Beacon_en); - - if (tp->dev->mtu <= ETH_DATA_LEN) - rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B); } static void rtl_hw_start_8168cp_3(struct rtl8169_private *tp) @@ -4503,9 +4500,6 @@ static void rtl_hw_start_8168cp_3(struct rtl8169_private *tp) /* Magic. */ RTL_W8(tp, DBG_REG, 0x20); - - if (tp->dev->mtu <= ETH_DATA_LEN) - rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B); } static void rtl_hw_start_8168c_1(struct rtl8169_private *tp) @@ -4611,9 +4605,6 @@ static void rtl_hw_start_8168e_1(struct rtl8169_private *tp) rtl_ephy_init(tp, e_info_8168e_1); - if (tp->dev->mtu <= ETH_DATA_LEN) - rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B); - rtl_disable_clock_request(tp); /* Reset tx FIFO pointer */ @@ -4636,9 +4627,6 @@ static void rtl_hw_start_8168e_2(struct rtl8169_private *tp) rtl_ephy_init(tp, e_info_8168e_2); - if (tp->dev->mtu <= ETH_DATA_LEN) - rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B); - rtl_eri_write(tp, 0xc0, ERIAR_MASK_0011, 0x0000); rtl_eri_write(tp, 0xb8, ERIAR_MASK_0011, 0x0000); rtl_set_fifo_size(tp, 0x10, 0x10, 0x02, 0x06); @@ -5485,6 +5473,8 @@ static void rtl_hw_start(struct rtl8169_private *tp) rtl_set_rx_tx_desc_registers(tp); rtl_lock_config_regs(tp); + rtl_jumbo_config(tp, tp->dev->mtu); + /* Initially a 10 us delay. Turned it into a PCI commit. - FR */ RTL_R16(tp, CPlusCmd); RTL_W8(tp, ChipCmd, CmdTxEnb | CmdRxEnb); @@ -5498,10 +5488,7 @@ static int rtl8169_change_mtu(struct net_device *dev, int new_mtu) { struct rtl8169_private *tp = netdev_priv(dev); - if (new_mtu > ETH_DATA_LEN) - rtl_hw_jumbo_enable(tp); - else - rtl_hw_jumbo_disable(tp); + rtl_jumbo_config(tp, new_mtu); dev->mtu = new_mtu; netdev_update_features(dev); -- cgit v1.2.3 From c23936fad79ea2bea749db19b8921bb4dc524905 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Thu, 10 Oct 2019 22:46:06 +0200 Subject: net: lpc_eth: avoid resetting twice __lpc_eth_shutdown is called after __lpc_eth_reset but it is already calling __lpc_eth_reset. Avoid resetting the IP twice. Signed-off-by: Alexandre Belloni Signed-off-by: David S. Miller --- drivers/net/ethernet/nxp/lpc_eth.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c index 141571e2ec11..544012a67221 100644 --- a/drivers/net/ethernet/nxp/lpc_eth.c +++ b/drivers/net/ethernet/nxp/lpc_eth.c @@ -1356,9 +1356,6 @@ static int lpc_eth_drv_probe(struct platform_device *pdev) if (!is_valid_ether_addr(ndev->dev_addr)) eth_hw_addr_random(ndev); - /* Reset the ethernet controller */ - __lpc_eth_reset(pldat); - /* then shut everything down to save power */ __lpc_eth_shutdown(pldat); -- cgit v1.2.3 From 11d49ce9f7946dfed4dcf5dbde865c78058b50ab Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?C=C3=A9dric=20Le=20Goater?= Date: Fri, 11 Oct 2019 07:52:54 +0200 Subject: net/ibmvnic: Fix EOI when running in XIVE mode. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit pSeries machines on POWER9 processors can run with the XICS (legacy) interrupt mode or with the XIVE exploitation interrupt mode. These interrupt contollers have different interfaces for interrupt management : XICS uses hcalls and XIVE loads and stores on a page. H_EOI being a XICS interface the enable_scrq_irq() routine can fail when the machine runs in XIVE mode. Fix that by calling the EOI handler of the interrupt chip. Fixes: f23e0643cd0b ("ibmvnic: Clear pending interrupt after device reset") Signed-off-by: Cédric Le Goater Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 2b073a3c0b84..f59d9a8e35e2 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -2878,12 +2878,10 @@ static int enable_scrq_irq(struct ibmvnic_adapter *adapter, if (test_bit(0, &adapter->resetting) && adapter->reset_reason == VNIC_RESET_MOBILITY) { - u64 val = (0xff000000) | scrq->hw_irq; + struct irq_desc *desc = irq_to_desc(scrq->irq); + struct irq_chip *chip = irq_desc_get_chip(desc); - rc = plpar_hcall_norets(H_EOI, val); - if (rc) - dev_err(dev, "H_EOI FAILED irq 0x%llx. rc=%ld\n", - val, rc); + chip->irq_eoi(&desc->irq_data); } rc = plpar_hcall_norets(H_VIOCTL, adapter->vdev->unit_address, -- cgit v1.2.3 From 33902b4a4227877896dd9368ac10f4ca0d100de5 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Fri, 11 Oct 2019 17:46:53 +0800 Subject: netdevsim: Fix error handling in nsim_fib_init and nsim_fib_exit In nsim_fib_init(), if register_fib_notifier failed, nsim_fib_net_ops should be unregistered before return. In nsim_fib_exit(), unregister_fib_notifier should be called before nsim_fib_net_ops be unregistered, otherwise may cause use-after-free: BUG: KASAN: use-after-free in nsim_fib_event_nb+0x342/0x570 [netdevsim] Read of size 8 at addr ffff8881daaf4388 by task kworker/0:3/3499 CPU: 0 PID: 3499 Comm: kworker/0:3 Not tainted 5.3.0-rc7+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work [ipv6] Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xa9/0x10e lib/dump_stack.c:113 print_address_description+0x65/0x380 mm/kasan/report.c:351 __kasan_report+0x149/0x18d mm/kasan/report.c:482 kasan_report+0xe/0x20 mm/kasan/common.c:618 nsim_fib_event_nb+0x342/0x570 [netdevsim] notifier_call_chain+0x52/0xf0 kernel/notifier.c:95 __atomic_notifier_call_chain+0x78/0x140 kernel/notifier.c:185 call_fib_notifiers+0x30/0x60 net/core/fib_notifier.c:30 call_fib6_entry_notifiers+0xc1/0x100 [ipv6] fib6_add+0x92e/0x1b10 [ipv6] __ip6_ins_rt+0x40/0x60 [ipv6] ip6_ins_rt+0x84/0xb0 [ipv6] __ipv6_ifa_notify+0x4b6/0x550 [ipv6] ipv6_ifa_notify+0xa5/0x180 [ipv6] addrconf_dad_completed+0xca/0x640 [ipv6] addrconf_dad_work+0x296/0x960 [ipv6] process_one_work+0x5c0/0xc00 kernel/workqueue.c:2269 worker_thread+0x5c/0x670 kernel/workqueue.c:2415 kthread+0x1d7/0x200 kernel/kthread.c:255 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Allocated by task 3388: save_stack+0x19/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:493 kmalloc include/linux/slab.h:557 [inline] kzalloc include/linux/slab.h:748 [inline] ops_init+0xa9/0x220 net/core/net_namespace.c:127 __register_pernet_operations net/core/net_namespace.c:1135 [inline] register_pernet_operations+0x1d4/0x420 net/core/net_namespace.c:1212 register_pernet_subsys+0x24/0x40 net/core/net_namespace.c:1253 nsim_fib_init+0x12/0x70 [netdevsim] veth_get_link_ksettings+0x2b/0x50 [veth] do_one_initcall+0xd4/0x454 init/main.c:939 do_init_module+0xe0/0x330 kernel/module.c:3490 load_module+0x3c2f/0x4620 kernel/module.c:3841 __do_sys_finit_module+0x163/0x190 kernel/module.c:3931 do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3534: save_stack+0x19/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1423 [inline] slab_free_freelist_hook mm/slub.c:1474 [inline] slab_free mm/slub.c:3016 [inline] kfree+0xe9/0x2d0 mm/slub.c:3957 ops_free net/core/net_namespace.c:151 [inline] ops_free_list.part.7+0x156/0x220 net/core/net_namespace.c:184 ops_free_list net/core/net_namespace.c:182 [inline] __unregister_pernet_operations net/core/net_namespace.c:1165 [inline] unregister_pernet_operations+0x221/0x2a0 net/core/net_namespace.c:1224 unregister_pernet_subsys+0x1d/0x30 net/core/net_namespace.c:1271 nsim_fib_exit+0x11/0x20 [netdevsim] nsim_module_exit+0x16/0x21 [netdevsim] __do_sys_delete_module kernel/module.c:1015 [inline] __se_sys_delete_module kernel/module.c:958 [inline] __x64_sys_delete_module+0x244/0x330 kernel/module.c:958 do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: Hulk Robot Fixes: 59c84b9fcf42 ("netdevsim: Restore per-network namespace accounting for fib entries") Signed-off-by: YueHaibing Acked-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/netdevsim/fib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/netdevsim/fib.c b/drivers/net/netdevsim/fib.c index f61d094746c0..1a251f76d09b 100644 --- a/drivers/net/netdevsim/fib.c +++ b/drivers/net/netdevsim/fib.c @@ -241,8 +241,8 @@ static struct pernet_operations nsim_fib_net_ops = { void nsim_fib_exit(void) { - unregister_pernet_subsys(&nsim_fib_net_ops); unregister_fib_notifier(&nsim_fib_nb); + unregister_pernet_subsys(&nsim_fib_net_ops); } int nsim_fib_init(void) @@ -258,6 +258,7 @@ int nsim_fib_init(void) err = register_fib_notifier(&nsim_fib_nb, nsim_fib_dump_inconsistent); if (err < 0) { pr_err("Failed to register fib notifier\n"); + unregister_pernet_subsys(&nsim_fib_net_ops); goto err_out; } -- cgit v1.2.3 From d79749f7716d9dc32fa2d5075f6ec29aac63c76d Mon Sep 17 00:00:00 2001 From: Miaoqing Pan Date: Thu, 29 Aug 2019 10:45:12 +0800 Subject: ath10k: fix latency issue for QCA988x (kvalo: cherry picked from commit 1340cc631bd00431e2f174525c971f119df9efa1 in wireless-drivers-next to wireless-drivers as this a frequently reported regression) Bad latency is found on QCA988x, the issue was introduced by commit 4504f0e5b571 ("ath10k: sdio: workaround firmware UART pin configuration bug"). If uart_pin_workaround is false, this change will set uart pin even if uart_print is false. Tested HW: QCA9880 Tested FW: 10.2.4-1.0-00037 Fixes: 4504f0e5b571 ("ath10k: sdio: workaround firmware UART pin configuration bug") Signed-off-by: Miaoqing Pan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/core.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index dc45d16e8d21..383d4fa555a8 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -2118,12 +2118,15 @@ static int ath10k_init_uart(struct ath10k *ar) return ret; } - if (!uart_print && ar->hw_params.uart_pin_workaround) { - ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin, - ar->hw_params.uart_pin); - if (ret) { - ath10k_warn(ar, "failed to set UART TX pin: %d", ret); - return ret; + if (!uart_print) { + if (ar->hw_params.uart_pin_workaround) { + ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin, + ar->hw_params.uart_pin); + if (ret) { + ath10k_warn(ar, "failed to set UART TX pin: %d", + ret); + return ret; + } } return 0; -- cgit v1.2.3 From 06b0d7fe7e5ff3ba4c7e265ef41135e8bcc232bb Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Fri, 11 Oct 2019 13:45:19 +0000 Subject: net: aquantia: temperature retrieval fix MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Chip temperature is a two byte word, colocated internally with cable length data. We do all readouts from HW memory by dwords, thus we should clear extra high bytes, otherwise temperature output gets weird as soon as we attach a cable to the NIC. Fixes: 8f8940118654 ("net: aquantia: add infrastructure to readout chip temperature") Tested-by: Holger Hoffstätte Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c index da726489e3c8..7bc51f8d6f2f 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c @@ -337,7 +337,7 @@ static int aq_fw2x_get_phy_temp(struct aq_hw_s *self, int *temp) /* Convert PHY temperature from 1/256 degree Celsius * to 1/1000 degree Celsius. */ - *temp = temp_res * 1000 / 256; + *temp = (temp_res & 0xFFFF) * 1000 / 256; return 0; } -- cgit v1.2.3 From ed4d81c4b3f28ccf624f11fd66f67aec5b58859c Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Fri, 11 Oct 2019 13:45:20 +0000 Subject: net: aquantia: when cleaning hw cache it should be toggled >From HW specification to correctly reset HW caches (this is a required workaround when stopping the device), register bit should actually be toggled. It was previosly always just set. Due to the way driver stops HW this never actually caused any issues, but it still may, so cleaning this up. Fixes: 7a1bb49461b1 ("net: aquantia: fix potential IOMMU fault after driver unbind") Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- .../net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 16 ++++++++++++++-- .../ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c | 17 +++++++++++++++-- .../ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h | 7 +++++-- .../aquantia/atlantic/hw_atl/hw_atl_llh_internal.h | 19 +++++++++++++++++++ 4 files changed, 53 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index 30f7fc4c97ff..3459fadb7ddd 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -968,14 +968,26 @@ static int hw_atl_b0_hw_interrupt_moderation_set(struct aq_hw_s *self) static int hw_atl_b0_hw_stop(struct aq_hw_s *self) { + int err; + u32 val; + hw_atl_b0_hw_irq_disable(self, HW_ATL_B0_INT_MASK); /* Invalidate Descriptor Cache to prevent writing to the cached * descriptors and to the data pointer of those descriptors */ - hw_atl_rdm_rx_dma_desc_cache_init_set(self, 1); + hw_atl_rdm_rx_dma_desc_cache_init_tgl(self); - return aq_hw_err_from_flags(self); + err = aq_hw_err_from_flags(self); + + if (err) + goto err_exit; + + readx_poll_timeout_atomic(hw_atl_rdm_rx_dma_desc_cache_init_done_get, + self, val, val == 1, 1000U, 10000U); + +err_exit: + return err; } static int hw_atl_b0_hw_ring_tx_stop(struct aq_hw_s *self, diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c index 1149812ae463..6f340695e6bd 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c @@ -606,12 +606,25 @@ void hw_atl_rpb_rx_flow_ctl_mode_set(struct aq_hw_s *aq_hw, u32 rx_flow_ctl_mode HW_ATL_RPB_RX_FC_MODE_SHIFT, rx_flow_ctl_mode); } -void hw_atl_rdm_rx_dma_desc_cache_init_set(struct aq_hw_s *aq_hw, u32 init) +void hw_atl_rdm_rx_dma_desc_cache_init_tgl(struct aq_hw_s *aq_hw) { + u32 val; + + val = aq_hw_read_reg_bit(aq_hw, HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_ADR, + HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_MSK, + HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_SHIFT); + aq_hw_write_reg_bit(aq_hw, HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_ADR, HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_MSK, HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_SHIFT, - init); + val ^ 1); +} + +u32 hw_atl_rdm_rx_dma_desc_cache_init_done_get(struct aq_hw_s *aq_hw) +{ + return aq_hw_read_reg_bit(aq_hw, RDM_RX_DMA_DESC_CACHE_INIT_DONE_ADR, + RDM_RX_DMA_DESC_CACHE_INIT_DONE_MSK, + RDM_RX_DMA_DESC_CACHE_INIT_DONE_SHIFT); } void hw_atl_rpb_rx_pkt_buff_size_per_tc_set(struct aq_hw_s *aq_hw, diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h index 0c37abbabca5..c3ee278c3747 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h @@ -313,8 +313,11 @@ void hw_atl_rpb_rx_pkt_buff_size_per_tc_set(struct aq_hw_s *aq_hw, u32 rx_pkt_buff_size_per_tc, u32 buffer); -/* set rdm rx dma descriptor cache init */ -void hw_atl_rdm_rx_dma_desc_cache_init_set(struct aq_hw_s *aq_hw, u32 init); +/* toggle rdm rx dma descriptor cache init */ +void hw_atl_rdm_rx_dma_desc_cache_init_tgl(struct aq_hw_s *aq_hw); + +/* get rdm rx dma descriptor cache init done */ +u32 hw_atl_rdm_rx_dma_desc_cache_init_done_get(struct aq_hw_s *aq_hw); /* set rx xoff enable (per tc) */ void hw_atl_rpb_rx_xoff_en_per_tc_set(struct aq_hw_s *aq_hw, u32 rx_xoff_en_per_tc, diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h index c3febcdfa92e..35887ad89025 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h @@ -318,6 +318,25 @@ /* default value of bitfield rdm_desc_init_i */ #define HW_ATL_RDM_RX_DMA_DESC_CACHE_INIT_DEFAULT 0x0 +/* rdm_desc_init_done_i bitfield definitions + * preprocessor definitions for the bitfield rdm_desc_init_done_i. + * port="pif_rdm_desc_init_done_i" + */ + +/* register address for bitfield rdm_desc_init_done_i */ +#define RDM_RX_DMA_DESC_CACHE_INIT_DONE_ADR 0x00005a10 +/* bitmask for bitfield rdm_desc_init_done_i */ +#define RDM_RX_DMA_DESC_CACHE_INIT_DONE_MSK 0x00000001U +/* inverted bitmask for bitfield rdm_desc_init_done_i */ +#define RDM_RX_DMA_DESC_CACHE_INIT_DONE_MSKN 0xfffffffe +/* lower bit position of bitfield rdm_desc_init_done_i */ +#define RDM_RX_DMA_DESC_CACHE_INIT_DONE_SHIFT 0U +/* width of bitfield rdm_desc_init_done_i */ +#define RDM_RX_DMA_DESC_CACHE_INIT_DONE_WIDTH 1 +/* default value of bitfield rdm_desc_init_done_i */ +#define RDM_RX_DMA_DESC_CACHE_INIT_DONE_DEFAULT 0x0 + + /* rx int_desc_wrb_en bitfield definitions * preprocessor definitions for the bitfield "int_desc_wrb_en". * port="pif_rdm_int_desc_wrb_en_i" -- cgit v1.2.3 From d08b9a0a3ebdf71b0aabe576c7dd48e57e80e0f0 Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Fri, 11 Oct 2019 13:45:22 +0000 Subject: net: aquantia: do not pass lro session with invalid tcp checksum Individual descriptors on LRO TCP session should be checked for CRC errors. It was discovered that HW recalculates L4 checksums on LRO session and does not break it up on bad L4 csum. Thus, driver should aggregate HW LRO L4 statuses from all individual buffers of LRO session and drop packet if one of the buffers has bad L4 checksum. Fixes: f38f1ee8aeb2 ("net: aquantia: check rx csum for all packets in LRO session") Signed-off-by: Dmitry Bogdanov Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_ring.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c index 3901d7994ca1..76bdbe1596d6 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c @@ -313,6 +313,7 @@ int aq_ring_rx_clean(struct aq_ring_s *self, break; buff->is_error |= buff_->is_error; + buff->is_cso_err |= buff_->is_cso_err; } while (!buff_->is_eop); @@ -320,7 +321,7 @@ int aq_ring_rx_clean(struct aq_ring_s *self, err = 0; goto err_exit; } - if (buff->is_error) { + if (buff->is_error || buff->is_cso_err) { buff_ = buff; do { next_ = buff_->next, -- cgit v1.2.3 From 9f051db566da1e8110659ab4ab188af1c2510bb4 Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Fri, 11 Oct 2019 13:45:23 +0000 Subject: net: aquantia: correctly handle macvlan and multicast coexistence macvlan and multicast handling is now mixed up. The explicit issue is that macvlan interface gets broken (no traffic) after clearing MULTICAST flag on the real interface. We now do separate logic and consider both ALLMULTI and MULTICAST flags on the device. Fixes: 11ba961c9161 ("net: aquantia: Fix IFF_ALLMULTI flag functionality") Signed-off-by: Dmitry Bogdanov Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_main.c | 4 +-- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 32 +++++++++++----------- .../ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 7 +++-- 3 files changed, 21 insertions(+), 22 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_main.c b/drivers/net/ethernet/aquantia/atlantic/aq_main.c index b4a0fb281e69..bb65dd39f847 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_main.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_main.c @@ -194,9 +194,7 @@ static void aq_ndev_set_multicast_settings(struct net_device *ndev) { struct aq_nic_s *aq_nic = netdev_priv(ndev); - aq_nic_set_packet_filter(aq_nic, ndev->flags); - - aq_nic_set_multicast_list(aq_nic, ndev); + (void)aq_nic_set_multicast_list(aq_nic, ndev); } static int aq_ndo_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index 8f66e7817811..2a18439b36fb 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -631,9 +631,12 @@ err_exit: int aq_nic_set_multicast_list(struct aq_nic_s *self, struct net_device *ndev) { - unsigned int packet_filter = self->packet_filter; + const struct aq_hw_ops *hw_ops = self->aq_hw_ops; + struct aq_nic_cfg_s *cfg = &self->aq_nic_cfg; + unsigned int packet_filter = ndev->flags; struct netdev_hw_addr *ha = NULL; unsigned int i = 0U; + int err = 0; self->mc_list.count = 0; if (netdev_uc_count(ndev) > AQ_HW_MULTICAST_ADDRESS_MAX) { @@ -641,29 +644,26 @@ int aq_nic_set_multicast_list(struct aq_nic_s *self, struct net_device *ndev) } else { netdev_for_each_uc_addr(ha, ndev) { ether_addr_copy(self->mc_list.ar[i++], ha->addr); - - if (i >= AQ_HW_MULTICAST_ADDRESS_MAX) - break; } } - if (i + netdev_mc_count(ndev) > AQ_HW_MULTICAST_ADDRESS_MAX) { - packet_filter |= IFF_ALLMULTI; - } else { - netdev_for_each_mc_addr(ha, ndev) { - ether_addr_copy(self->mc_list.ar[i++], ha->addr); - - if (i >= AQ_HW_MULTICAST_ADDRESS_MAX) - break; + cfg->is_mc_list_enabled = !!(packet_filter & IFF_MULTICAST); + if (cfg->is_mc_list_enabled) { + if (i + netdev_mc_count(ndev) > AQ_HW_MULTICAST_ADDRESS_MAX) { + packet_filter |= IFF_ALLMULTI; + } else { + netdev_for_each_mc_addr(ha, ndev) { + ether_addr_copy(self->mc_list.ar[i++], + ha->addr); + } } } if (i > 0 && i <= AQ_HW_MULTICAST_ADDRESS_MAX) { - packet_filter |= IFF_MULTICAST; self->mc_list.count = i; - self->aq_hw_ops->hw_multicast_list_set(self->aq_hw, - self->mc_list.ar, - self->mc_list.count); + err = hw_ops->hw_multicast_list_set(self->aq_hw, + self->mc_list.ar, + self->mc_list.count); } return aq_nic_set_packet_filter(self, packet_filter); } diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index 3459fadb7ddd..2ad3fa6316ce 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -818,14 +818,15 @@ static int hw_atl_b0_hw_packet_filter_set(struct aq_hw_s *self, cfg->is_vlan_force_promisc); hw_atl_rpfl2multicast_flr_en_set(self, - IS_FILTER_ENABLED(IFF_ALLMULTI), 0); + IS_FILTER_ENABLED(IFF_ALLMULTI) && + IS_FILTER_ENABLED(IFF_MULTICAST), 0); hw_atl_rpfl2_accept_all_mc_packets_set(self, - IS_FILTER_ENABLED(IFF_ALLMULTI)); + IS_FILTER_ENABLED(IFF_ALLMULTI) && + IS_FILTER_ENABLED(IFF_MULTICAST)); hw_atl_rpfl2broadcast_en_set(self, IS_FILTER_ENABLED(IFF_BROADCAST)); - cfg->is_mc_list_enabled = IS_FILTER_ENABLED(IFF_MULTICAST); for (i = HW_ATL_B0_MAC_MIN; i < HW_ATL_B0_MAC_MAX; ++i) hw_atl_rpfl2_uc_flr_en_set(self, -- cgit v1.2.3 From 92696286f3bb37ba50e4bd8d1beb24afb759a799 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 11 Oct 2019 12:53:49 -0700 Subject: net: bcmgenet: Set phydev->dev_flags only for internal PHYs phydev->dev_flags is entirely dependent on the PHY device driver which is going to be used, setting the internal GENET PHY revision in those bits only makes sense when drivers/net/phy/bcm7xxx.c is the PHY driver being used. Fixes: 487320c54143 ("net: bcmgenet: communicate integrated PHY revision to PHY driver") Signed-off-by: Florian Fainelli Acked-by: Doug Berger Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmmii.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c index 970e478a9017..94d1dd5d56bf 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -273,11 +273,12 @@ int bcmgenet_mii_probe(struct net_device *dev) struct bcmgenet_priv *priv = netdev_priv(dev); struct device_node *dn = priv->pdev->dev.of_node; struct phy_device *phydev; - u32 phy_flags; + u32 phy_flags = 0; int ret; /* Communicate the integrated PHY revision */ - phy_flags = priv->gphy_rev; + if (priv->internal_phy) + phy_flags = priv->gphy_rev; /* Initialize link state variables that bcmgenet_mii_setup() uses */ priv->old_link = -1; -- cgit v1.2.3 From ddc790e92b3afa4e366ffb41818cfcd19015031e Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 11 Oct 2019 21:03:33 -0700 Subject: net: ethernet: broadcom: have drivers select DIMLIB as needed MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit NET_VENDOR_BROADCOM is intended to control a kconfig menu only. It should not have anything to do with code generation. As such, it should not select DIMLIB for all drivers under NET_VENDOR_BROADCOM. Instead each driver that needs DIMLIB should select it (being the symbols SYSTEMPORT, BNXT, and BCMGENET). Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907021810220.13058@ramsan.of.borg/ Fixes: 4f75da3666c0 ("linux/dim: Move implementation to .c files") Reported-by: Geert Uytterhoeven Signed-off-by: Randy Dunlap Cc: Uwe Kleine-König Cc: Tal Gilboa Cc: Saeed Mahameed Cc: netdev@vger.kernel.org Cc: linux-rdma@vger.kernel.org Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Doug Ledford Cc: Jason Gunthorpe Cc: Leon Romanovsky Cc: Or Gerlitz Cc: Sagi Grimberg Acked-by: Florian Fainelli Reviewed-by: Leon Romanovsky Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/Kconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig index e24f5d2b6afe..53055ce5dfd6 100644 --- a/drivers/net/ethernet/broadcom/Kconfig +++ b/drivers/net/ethernet/broadcom/Kconfig @@ -8,7 +8,6 @@ config NET_VENDOR_BROADCOM default y depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \ SIBYTE_SB1xxx_SOC - select DIMLIB ---help--- If you have a network (Ethernet) chipset belonging to this class, say Y. @@ -69,6 +68,7 @@ config BCMGENET select FIXED_PHY select BCM7XXX_PHY select MDIO_BCM_UNIMAC + select DIMLIB help This driver supports the built-in Ethernet MACs found in the Broadcom BCM7xxx Set Top Box family chipset. @@ -188,6 +188,7 @@ config SYSTEMPORT select MII select PHYLIB select FIXED_PHY + select DIMLIB help This driver supports the built-in Ethernet MACs found in the Broadcom BCM7xxx Set Top Box family chipset using an internal @@ -200,6 +201,7 @@ config BNXT select LIBCRC32C select NET_DEVLINK select PAGE_POOL + select DIMLIB ---help--- This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit Ethernet cards. To compile this driver as a module, choose M here: -- cgit v1.2.3 From b31141d390f1d47f1f3e1aef04909dc48e894611 Mon Sep 17 00:00:00 2001 From: Nishad Kamdar Date: Sat, 12 Oct 2019 17:48:56 +0530 Subject: net: dsa: microchip: Use the correct style for SPDX License Identifier This patch corrects the SPDX License Identifier style in header files related to Distributed Switch Architecture drivers for Microchip KSZ series switch support. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches Signed-off-by: Nishad Kamdar Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/ksz9477_reg.h | 4 ++-- drivers/net/dsa/microchip/ksz_common.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/microchip/ksz9477_reg.h b/drivers/net/dsa/microchip/ksz9477_reg.h index 2938e892b631..16939f29faa5 100644 --- a/drivers/net/dsa/microchip/ksz9477_reg.h +++ b/drivers/net/dsa/microchip/ksz9477_reg.h @@ -1,5 +1,5 @@ -/* SPDX-License-Identifier: GPL-2.0 - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Microchip KSZ9477 register definitions * * Copyright (C) 2017-2018 Microchip Technology Inc. diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index dd60d0837fc6..64c2677693d2 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -1,5 +1,5 @@ -/* SPDX-License-Identifier: GPL-2.0 - * Microchip switch driver common header +/* SPDX-License-Identifier: GPL-2.0 */ +/* Microchip switch driver common header * * Copyright (C) 2017-2019 Microchip Technology Inc. */ -- cgit v1.2.3 From a03681dd5d1bf7b0ed3aad3162f7810af4c4e05b Mon Sep 17 00:00:00 2001 From: Nishad Kamdar Date: Sat, 12 Oct 2019 18:42:28 +0530 Subject: net: cavium: Use the correct style for SPDX License Identifier This patch corrects the SPDX License Identifier style in header files related to Cavium Ethernet drivers. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches Signed-off-by: Nishad Kamdar Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/common/cavium_ptp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/cavium/common/cavium_ptp.h b/drivers/net/ethernet/cavium/common/cavium_ptp.h index be2bafc7beeb..a04eccbc78e8 100644 --- a/drivers/net/ethernet/cavium/common/cavium_ptp.h +++ b/drivers/net/ethernet/cavium/common/cavium_ptp.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* cavium_ptp.h - PTP 1588 clock on Cavium hardware * Copyright (c) 2003-2015, 2017 Cavium, Inc. */ -- cgit v1.2.3 From 4e3eff5beafa5c97cdf2af2181f46479941a7f45 Mon Sep 17 00:00:00 2001 From: MarkLee Date: Mon, 14 Oct 2019 15:15:17 +0800 Subject: net: ethernet: mediatek: Fix MT7629 missing GMII mode support In the original design, mtk_phy_connect function will set ge_mode=1 if phy-mode is GMII(PHY_INTERFACE_MODE_GMII) and then set the correct ge_mode to ETHSYS_SYSCFG0 register. This logic was broken after apply mediatek PHYLINK patch(Fixes tag), the new mtk_mac_config function will not set ge_mode=1 for GMII mode hence the final ETHSYS_SYSCFG0 setting will be incorrect for mt7629 GMII mode. This patch add the missing logic back to fix it. Fixes: b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support") Signed-off-by: MarkLee Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index c61069340f4f..703adb96429e 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -261,6 +261,7 @@ static void mtk_mac_config(struct phylink_config *config, unsigned int mode, ge_mode = 0; switch (state->interface) { case PHY_INTERFACE_MODE_MII: + case PHY_INTERFACE_MODE_GMII: ge_mode = 1; break; case PHY_INTERFACE_MODE_REVMII: -- cgit v1.2.3 From b790b5549bdf498ab0ecc5632610a9149532fa38 Mon Sep 17 00:00:00 2001 From: Nishad Kamdar Date: Mon, 14 Oct 2019 21:51:20 +0530 Subject: net: dsa: sja1105: Use the correct style for SPDX License Identifier This patch corrects the SPDX License Identifier style in header files related to Distributed Switch Architecture drivers for NXP SJA1105 series Ethernet switch support. It uses an expilict block comment for the SPDX License Identifier. Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches Signed-off-by: Nishad Kamdar Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105.h | 4 ++-- drivers/net/dsa/sja1105/sja1105_dynamic_config.h | 4 ++-- drivers/net/dsa/sja1105/sja1105_ptp.h | 4 ++-- drivers/net/dsa/sja1105/sja1105_static_config.h | 4 ++-- drivers/net/dsa/sja1105/sja1105_tas.h | 4 ++-- 5 files changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h index e53e494c22e0..fbb564c3beb8 100644 --- a/drivers/net/dsa/sja1105/sja1105.h +++ b/drivers/net/dsa/sja1105/sja1105.h @@ -1,5 +1,5 @@ -/* SPDX-License-Identifier: GPL-2.0 - * Copyright (c) 2018, Sensor-Technik Wiedemann GmbH +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2018, Sensor-Technik Wiedemann GmbH * Copyright (c) 2018-2019, Vladimir Oltean */ #ifndef _SJA1105_H diff --git a/drivers/net/dsa/sja1105/sja1105_dynamic_config.h b/drivers/net/dsa/sja1105/sja1105_dynamic_config.h index 740dadf43f01..1fc0d13dc623 100644 --- a/drivers/net/dsa/sja1105/sja1105_dynamic_config.h +++ b/drivers/net/dsa/sja1105/sja1105_dynamic_config.h @@ -1,5 +1,5 @@ -/* SPDX-License-Identifier: GPL-2.0 - * Copyright (c) 2019, Vladimir Oltean +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2019, Vladimir Oltean */ #ifndef _SJA1105_DYNAMIC_CONFIG_H #define _SJA1105_DYNAMIC_CONFIG_H diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.h b/drivers/net/dsa/sja1105/sja1105_ptp.h index af456b0a4d27..394e12a6ad59 100644 --- a/drivers/net/dsa/sja1105/sja1105_ptp.h +++ b/drivers/net/dsa/sja1105/sja1105_ptp.h @@ -1,5 +1,5 @@ -/* SPDX-License-Identifier: GPL-2.0 - * Copyright (c) 2019, Vladimir Oltean +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2019, Vladimir Oltean */ #ifndef _SJA1105_PTP_H #define _SJA1105_PTP_H diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.h b/drivers/net/dsa/sja1105/sja1105_static_config.h index 7f87022a2d61..f4a5c5c04311 100644 --- a/drivers/net/dsa/sja1105/sja1105_static_config.h +++ b/drivers/net/dsa/sja1105/sja1105_static_config.h @@ -1,5 +1,5 @@ -/* SPDX-License-Identifier: BSD-3-Clause - * Copyright (c) 2016-2018, NXP Semiconductors +/* SPDX-License-Identifier: BSD-3-Clause */ +/* Copyright (c) 2016-2018, NXP Semiconductors * Copyright (c) 2018-2019, Vladimir Oltean */ #ifndef _SJA1105_STATIC_CONFIG_H diff --git a/drivers/net/dsa/sja1105/sja1105_tas.h b/drivers/net/dsa/sja1105/sja1105_tas.h index 0b803c30e640..0aad212d88b2 100644 --- a/drivers/net/dsa/sja1105/sja1105_tas.h +++ b/drivers/net/dsa/sja1105/sja1105_tas.h @@ -1,5 +1,5 @@ -/* SPDX-License-Identifier: GPL-2.0 - * Copyright (c) 2019, Vladimir Oltean +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2019, Vladimir Oltean */ #ifndef _SJA1105_TAS_H #define _SJA1105_TAS_H -- cgit v1.2.3 From 61c1d33daf7b5146f44d4363b3322f8cda6a6c43 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 15 Oct 2019 16:42:45 +0200 Subject: net: i82596: fix dma_alloc_attr for sni_82596 Commit 7f683b920479 ("i825xx: switch to switch to dma_alloc_attrs") switched dma allocation over to dma_alloc_attr, but didn't convert the SNI part to request consistent DMA memory. This broke sni_82596 since driver doesn't do dma_cache_sync for performance reasons. Fix this by using different DMA_ATTRs for lasi_82596 and sni_82596. Fixes: 7f683b920479 ("i825xx: switch to switch to dma_alloc_attrs") Signed-off-by: Thomas Bogendoerfer Signed-off-by: David S. Miller --- drivers/net/ethernet/i825xx/lasi_82596.c | 4 +++- drivers/net/ethernet/i825xx/lib82596.c | 4 ++-- drivers/net/ethernet/i825xx/sni_82596.c | 4 +++- 3 files changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/i825xx/lasi_82596.c b/drivers/net/ethernet/i825xx/lasi_82596.c index 211c5f74b4c8..aec7e98bcc85 100644 --- a/drivers/net/ethernet/i825xx/lasi_82596.c +++ b/drivers/net/ethernet/i825xx/lasi_82596.c @@ -96,6 +96,8 @@ #define OPT_SWAP_PORT 0x0001 /* Need to wordswp on the MPU port */ +#define LIB82596_DMA_ATTR DMA_ATTR_NON_CONSISTENT + #define DMA_WBACK(ndev, addr, len) \ do { dma_cache_sync((ndev)->dev.parent, (void *)addr, len, DMA_TO_DEVICE); } while (0) @@ -200,7 +202,7 @@ static int __exit lan_remove_chip(struct parisc_device *pdev) unregister_netdev (dev); dma_free_attrs(&pdev->dev, sizeof(struct i596_private), lp->dma, - lp->dma_addr, DMA_ATTR_NON_CONSISTENT); + lp->dma_addr, LIB82596_DMA_ATTR); free_netdev (dev); return 0; } diff --git a/drivers/net/ethernet/i825xx/lib82596.c b/drivers/net/ethernet/i825xx/lib82596.c index 1274ad24d6af..f9742af7f142 100644 --- a/drivers/net/ethernet/i825xx/lib82596.c +++ b/drivers/net/ethernet/i825xx/lib82596.c @@ -1065,7 +1065,7 @@ static int i82596_probe(struct net_device *dev) dma = dma_alloc_attrs(dev->dev.parent, sizeof(struct i596_dma), &lp->dma_addr, GFP_KERNEL, - DMA_ATTR_NON_CONSISTENT); + LIB82596_DMA_ATTR); if (!dma) { printk(KERN_ERR "%s: Couldn't get shared memory\n", __FILE__); return -ENOMEM; @@ -1087,7 +1087,7 @@ static int i82596_probe(struct net_device *dev) i = register_netdev(dev); if (i) { dma_free_attrs(dev->dev.parent, sizeof(struct i596_dma), - dma, lp->dma_addr, DMA_ATTR_NON_CONSISTENT); + dma, lp->dma_addr, LIB82596_DMA_ATTR); return i; } diff --git a/drivers/net/ethernet/i825xx/sni_82596.c b/drivers/net/ethernet/i825xx/sni_82596.c index 6eb6c2ff7f09..6436a98c5953 100644 --- a/drivers/net/ethernet/i825xx/sni_82596.c +++ b/drivers/net/ethernet/i825xx/sni_82596.c @@ -24,6 +24,8 @@ static const char sni_82596_string[] = "snirm_82596"; +#define LIB82596_DMA_ATTR 0 + #define DMA_WBACK(priv, addr, len) do { } while (0) #define DMA_INV(priv, addr, len) do { } while (0) #define DMA_WBACK_INV(priv, addr, len) do { } while (0) @@ -152,7 +154,7 @@ static int sni_82596_driver_remove(struct platform_device *pdev) unregister_netdev(dev); dma_free_attrs(dev->dev.parent, sizeof(struct i596_private), lp->dma, - lp->dma_addr, DMA_ATTR_NON_CONSISTENT); + lp->dma_addr, LIB82596_DMA_ATTR); iounmap(lp->ca); iounmap(lp->mpu_port); free_netdev (dev); -- cgit v1.2.3 From 539825a536040e09a2f26eb54bef206e8e8086b5 Mon Sep 17 00:00:00 2001 From: "Ben Dooks (Codethink)" Date: Tue, 15 Oct 2019 17:15:58 +0100 Subject: davinci_cpdma: make cpdma_chan_split_pool static The cpdma_chan_split_pool() function is not used outside of the driver, so make it static to avoid the following sparse warning: drivers/net/ethernet/ti/davinci_cpdma.c:725:5: warning: symbol 'cpdma_chan_split_pool' was not declared. Should it be static? Signed-off-by: Ben Dooks Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_cpdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c index a65edd2770e6..37ba708ac781 100644 --- a/drivers/net/ethernet/ti/davinci_cpdma.c +++ b/drivers/net/ethernet/ti/davinci_cpdma.c @@ -722,7 +722,7 @@ static void cpdma_chan_set_descs(struct cpdma_ctlr *ctlr, * cpdma_chan_split_pool - Splits ctrl pool between all channels. * Has to be called under ctlr lock */ -int cpdma_chan_split_pool(struct cpdma_ctlr *ctlr) +static int cpdma_chan_split_pool(struct cpdma_ctlr *ctlr) { int tx_per_ch_desc = 0, rx_per_ch_desc = 0; int free_rx_num = 0, free_tx_num = 0; -- cgit v1.2.3 From bad28d889caea00bc9415c59fa6a433a72eeaf5e Mon Sep 17 00:00:00 2001 From: "Ben Dooks (Codethink)" Date: Tue, 15 Oct 2019 17:17:48 +0100 Subject: net: stmmac: make tc_flow_parsers static The tc_flow_parsers is not used outside of the driver, so make it static to avoid the following sparse warning: drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c:516:3: warning: symbol 'tc_flow_parsers' was not declared. Should it be static? Signed-off-by: Ben Dooks Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c index e231098061b6..f9a9a9d82233 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c @@ -510,7 +510,7 @@ static struct stmmac_flow_entry *tc_find_flow(struct stmmac_priv *priv, return NULL; } -struct { +static struct { int (*fn)(struct stmmac_priv *priv, struct flow_cls_offload *cls, struct stmmac_flow_entry *entry); } tc_flow_parsers[] = { -- cgit v1.2.3 From efb86fede98cdc70b674692ff617b1162f642c49 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 15 Oct 2019 10:45:47 -0700 Subject: net: bcmgenet: Fix RGMII_MODE_EN value for GENET v1/2/3 The RGMII_MODE_EN bit value was 0 for GENET versions 1 through 3, and became 6 for GENET v4 and above, account for that difference. Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines") Signed-off-by: Florian Fainelli Acked-by: Doug Berger Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.h | 1 + drivers/net/ethernet/broadcom/genet/bcmmii.c | 6 +++++- 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h index 4a8fc03d82fd..dbc69d8fa05f 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h @@ -366,6 +366,7 @@ struct bcmgenet_mib_counters { #define EXT_PWR_DOWN_PHY_EN (1 << 20) #define EXT_RGMII_OOB_CTRL 0x0C +#define RGMII_MODE_EN_V123 (1 << 0) #define RGMII_LINK (1 << 4) #define OOB_DISABLE (1 << 5) #define RGMII_MODE_EN (1 << 6) diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c index 94d1dd5d56bf..e7c291bf4ed1 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -258,7 +258,11 @@ int bcmgenet_mii_config(struct net_device *dev, bool init) */ if (priv->ext_phy) { reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL); - reg |= RGMII_MODE_EN | id_mode_dis; + reg |= id_mode_dis; + if (GENET_IS_V1(priv) || GENET_IS_V2(priv) || GENET_IS_V3(priv)) + reg |= RGMII_MODE_EN_V123; + else + reg |= RGMII_MODE_EN; bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL); } -- cgit v1.2.3 From 77b6d09f4ae66d42cd63b121af67780ae3d1a5e9 Mon Sep 17 00:00:00 2001 From: Valentin Vidic Date: Tue, 15 Oct 2019 22:20:20 +0200 Subject: net: usb: sr9800: fix uninitialized local variable Make sure res does not contain random value if the call to sr_read_cmd fails for some reason. Reported-by: syzbot+f1842130bbcfb335bac1@syzkaller.appspotmail.com Signed-off-by: Valentin Vidic Signed-off-by: David S. Miller --- drivers/net/usb/sr9800.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/sr9800.c b/drivers/net/usb/sr9800.c index c5d4a0060124..681e0def6356 100644 --- a/drivers/net/usb/sr9800.c +++ b/drivers/net/usb/sr9800.c @@ -335,7 +335,7 @@ static void sr_set_multicast(struct net_device *net) static int sr_mdio_read(struct net_device *net, int phy_id, int loc) { struct usbnet *dev = netdev_priv(net); - __le16 res; + __le16 res = 0; mutex_lock(&dev->phy_mutex); sr_set_sw_mii(dev); -- cgit v1.2.3 From 3de5ae54712c75cf3c517a288e0a704784ec6cf5 Mon Sep 17 00:00:00 2001 From: Yonglong Liu Date: Wed, 16 Oct 2019 10:30:39 +0800 Subject: net: phy: Fix "link partner" information disappear issue Some drivers just call phy_ethtool_ksettings_set() to set the links, for those phy drivers that use genphy_read_status(), if autoneg is on, and the link is up, than execute "ethtool -s ethx autoneg on" will cause "link partner" information disappear. The call trace is phy_ethtool_ksettings_set()->phy_start_aneg() ->linkmode_zero(phydev->lp_advertising)->genphy_read_status(), the link didn't change, so genphy_read_status() just return, and phydev->lp_advertising is zero now. This patch moves the clear operation of lp_advertising from phy_start_aneg() to genphy_read_lpa()/genphy_c45_read_lpa(), and if autoneg on and autoneg not complete, just clear what the generic functions care about. Fixes: 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status") Signed-off-by: Yonglong Liu Reviewed-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/phy/phy-c45.c | 2 ++ drivers/net/phy/phy.c | 3 --- drivers/net/phy/phy_device.c | 11 ++++++++++- 3 files changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c index 7935593debb1..a1caeee12236 100644 --- a/drivers/net/phy/phy-c45.c +++ b/drivers/net/phy/phy-c45.c @@ -323,6 +323,8 @@ int genphy_c45_read_pma(struct phy_device *phydev) { int val; + linkmode_zero(phydev->lp_advertising); + val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1); if (val < 0) return val; diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 119e6f466056..105d389b58e7 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -572,9 +572,6 @@ int phy_start_aneg(struct phy_device *phydev) if (AUTONEG_DISABLE == phydev->autoneg) phy_sanitize_settings(phydev); - /* Invalidate LP advertising flags */ - linkmode_zero(phydev->lp_advertising); - err = phy_config_aneg(phydev); if (err < 0) goto out_unlock; diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 9d2bbb13293e..adb66a2fae18 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1787,7 +1787,14 @@ int genphy_read_lpa(struct phy_device *phydev) { int lpa, lpagb; - if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) { + if (phydev->autoneg == AUTONEG_ENABLE) { + if (!phydev->autoneg_complete) { + mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, + 0); + mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, 0); + return 0; + } + if (phydev->is_gigabit_capable) { lpagb = phy_read(phydev, MII_STAT1000); if (lpagb < 0) @@ -1815,6 +1822,8 @@ int genphy_read_lpa(struct phy_device *phydev) return lpa; mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa); + } else { + linkmode_zero(phydev->lp_advertising); } return 0; -- cgit v1.2.3 From e497c20e203680aba9ccf7bb475959595908ca7e Mon Sep 17 00:00:00 2001 From: Biao Huang Date: Tue, 15 Oct 2019 11:24:44 +0800 Subject: net: stmmac: disable/enable ptp_ref_clk in suspend/resume flow disable ptp_ref_clk in suspend flow, and enable it in resume flow. Fixes: f573c0b9c4e0 ("stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure") Signed-off-by: Biao Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index c76a1336a451..8fa13d43b5bc 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -4742,8 +4742,10 @@ int stmmac_suspend(struct device *dev) stmmac_mac_set(priv, priv->ioaddr, false); pinctrl_pm_select_sleep_state(priv->device); /* Disable clock in case of PWM is off */ - clk_disable(priv->plat->pclk); - clk_disable(priv->plat->stmmac_clk); + if (priv->plat->clk_ptp_ref) + clk_disable_unprepare(priv->plat->clk_ptp_ref); + clk_disable_unprepare(priv->plat->pclk); + clk_disable_unprepare(priv->plat->stmmac_clk); } mutex_unlock(&priv->lock); @@ -4806,8 +4808,10 @@ int stmmac_resume(struct device *dev) } else { pinctrl_pm_select_default_state(priv->device); /* enable the clk previously disabled */ - clk_enable(priv->plat->stmmac_clk); - clk_enable(priv->plat->pclk); + clk_prepare_enable(priv->plat->stmmac_clk); + clk_prepare_enable(priv->plat->pclk); + if (priv->plat->clk_ptp_ref) + clk_prepare_enable(priv->plat->clk_ptp_ref); /* reset the phy so that it's ready */ if (priv->mii) stmmac_mdio_reset(priv->mii); -- cgit v1.2.3 From af0de1303c4e8f44fadd7b4c593f09f22324b04f Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 17 Oct 2019 15:25:47 +0200 Subject: usb: hso: obey DMA rules in tiocmget The serial state information must not be embedded into another data structure, as this interferes with cache handling for DMA on architectures without cache coherence.. That would result in data corruption on some architectures Allocating it separately. v2: fix syntax error Signed-off-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index a505b2ab88b8..74849da031fa 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -186,7 +186,7 @@ struct hso_tiocmget { int intr_completed; struct usb_endpoint_descriptor *endp; struct urb *urb; - struct hso_serial_state_notification serial_state_notification; + struct hso_serial_state_notification *serial_state_notification; u16 prev_UART_state_bitmap; struct uart_icount icount; }; @@ -1432,7 +1432,7 @@ static int tiocmget_submit_urb(struct hso_serial *serial, usb_rcvintpipe(usb, tiocmget->endp-> bEndpointAddress & 0x7F), - &tiocmget->serial_state_notification, + tiocmget->serial_state_notification, sizeof(struct hso_serial_state_notification), tiocmget_intr_callback, serial, tiocmget->endp->bInterval); @@ -1479,7 +1479,7 @@ static void tiocmget_intr_callback(struct urb *urb) /* wIndex should be the USB interface number of the port to which the * notification applies, which should always be the Modem port. */ - serial_state_notification = &tiocmget->serial_state_notification; + serial_state_notification = tiocmget->serial_state_notification; if (serial_state_notification->bmRequestType != BM_REQUEST_TYPE || serial_state_notification->bNotification != B_NOTIFICATION || le16_to_cpu(serial_state_notification->wValue) != W_VALUE || @@ -2565,6 +2565,8 @@ static void hso_free_tiomget(struct hso_serial *serial) usb_free_urb(tiocmget->urb); tiocmget->urb = NULL; serial->tiocmget = NULL; + kfree(tiocmget->serial_state_notification); + tiocmget->serial_state_notification = NULL; kfree(tiocmget); } } @@ -2615,10 +2617,13 @@ static struct hso_device *hso_create_bulk_serial_device( num_urbs = 2; serial->tiocmget = kzalloc(sizeof(struct hso_tiocmget), GFP_KERNEL); + serial->tiocmget->serial_state_notification + = kzalloc(sizeof(struct hso_serial_state_notification), + GFP_KERNEL); /* it isn't going to break our heart if serial->tiocmget * allocation fails don't bother checking this. */ - if (serial->tiocmget) { + if (serial->tiocmget && serial->tiocmget->serial_state_notification) { tiocmget = serial->tiocmget; tiocmget->endp = hso_get_ep(interface, USB_ENDPOINT_XFER_INT, -- cgit v1.2.3 From 8398b375a9e3f5e4bba9bcdfed152a8a247dee01 Mon Sep 17 00:00:00 2001 From: Florin Chiculita Date: Wed, 16 Oct 2019 10:36:22 +0300 Subject: dpaa2-eth: add irq for the dpmac connect/disconnect event Add IRQ for the DPNI endpoint change event, resolving the issue when a dynamically created DPNI gets a randomly generated hw address when the endpoint is a DPMAC object. Signed-off-by: Florin Chiculita Signed-off-by: Ioana Ciornei Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 6 +++++- drivers/net/ethernet/freescale/dpaa2/dpni.h | 5 ++++- 2 files changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c index 162d7d8fb295..5acd734a216b 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c @@ -3306,6 +3306,9 @@ static irqreturn_t dpni_irq0_handler_thread(int irq_num, void *arg) if (status & DPNI_IRQ_EVENT_LINK_CHANGED) link_state_update(netdev_priv(net_dev)); + if (status & DPNI_IRQ_EVENT_ENDPOINT_CHANGED) + set_mac_addr(netdev_priv(net_dev)); + return IRQ_HANDLED; } @@ -3331,7 +3334,8 @@ static int setup_irqs(struct fsl_mc_device *ls_dev) } err = dpni_set_irq_mask(ls_dev->mc_io, 0, ls_dev->mc_handle, - DPNI_IRQ_INDEX, DPNI_IRQ_EVENT_LINK_CHANGED); + DPNI_IRQ_INDEX, DPNI_IRQ_EVENT_LINK_CHANGED | + DPNI_IRQ_EVENT_ENDPOINT_CHANGED); if (err < 0) { dev_err(&ls_dev->dev, "dpni_set_irq_mask(): %d\n", err); goto free_irq; diff --git a/drivers/net/ethernet/freescale/dpaa2/dpni.h b/drivers/net/ethernet/freescale/dpaa2/dpni.h index fd583911b6c0..ee0711d06b3a 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpni.h +++ b/drivers/net/ethernet/freescale/dpaa2/dpni.h @@ -133,9 +133,12 @@ int dpni_reset(struct fsl_mc_io *mc_io, */ #define DPNI_IRQ_INDEX 0 /** - * IRQ event - indicates a change in link state + * IRQ events: + * indicates a change in link state + * indicates a change in endpoint */ #define DPNI_IRQ_EVENT_LINK_CHANGED 0x00000001 +#define DPNI_IRQ_EVENT_ENDPOINT_CHANGED 0x00000002 int dpni_set_irq_enable(struct fsl_mc_io *mc_io, u32 cmd_flags, -- cgit v1.2.3 From a690af4f16f9bd1f976a4257e1529b6323a8d0e1 Mon Sep 17 00:00:00 2001 From: Ioana Radulescu Date: Wed, 16 Oct 2019 10:36:23 +0300 Subject: dpaa2-eth: Fix TX FQID values Depending on when MC connects the DPNI to a MAC, Tx FQIDs may not be available during probe time. Read the FQIDs each time the link goes up to avoid using invalid values. In case an error occurs or an invalid value is retrieved, fall back to QDID-based enqueueing. Fixes: 1fa0f68c9255 ("dpaa2-eth: Use FQ-based DPIO enqueue API") Signed-off-by: Ioana Radulescu Signed-off-by: Ioana Ciornei Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 44 ++++++++++++++++++++++++ 1 file changed, 44 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c index 5acd734a216b..19379bae0144 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c @@ -1235,6 +1235,8 @@ static void dpaa2_eth_set_rx_taildrop(struct dpaa2_eth_priv *priv, bool enable) priv->rx_td_enabled = enable; } +static void update_tx_fqids(struct dpaa2_eth_priv *priv); + static int link_state_update(struct dpaa2_eth_priv *priv) { struct dpni_link_state state = {0}; @@ -1261,6 +1263,7 @@ static int link_state_update(struct dpaa2_eth_priv *priv) goto out; if (state.up) { + update_tx_fqids(priv); netif_carrier_on(priv->net_dev); netif_tx_start_all_queues(priv->net_dev); } else { @@ -2533,6 +2536,47 @@ static int set_pause(struct dpaa2_eth_priv *priv) return 0; } +static void update_tx_fqids(struct dpaa2_eth_priv *priv) +{ + struct dpni_queue_id qid = {0}; + struct dpaa2_eth_fq *fq; + struct dpni_queue queue; + int i, j, err; + + /* We only use Tx FQIDs for FQID-based enqueue, so check + * if DPNI version supports it before updating FQIDs + */ + if (dpaa2_eth_cmp_dpni_ver(priv, DPNI_ENQUEUE_FQID_VER_MAJOR, + DPNI_ENQUEUE_FQID_VER_MINOR) < 0) + return; + + for (i = 0; i < priv->num_fqs; i++) { + fq = &priv->fq[i]; + if (fq->type != DPAA2_TX_CONF_FQ) + continue; + for (j = 0; j < dpaa2_eth_tc_count(priv); j++) { + err = dpni_get_queue(priv->mc_io, 0, priv->mc_token, + DPNI_QUEUE_TX, j, fq->flowid, + &queue, &qid); + if (err) + goto out_err; + + fq->tx_fqid[j] = qid.fqid; + if (fq->tx_fqid[j] == 0) + goto out_err; + } + } + + priv->enqueue = dpaa2_eth_enqueue_fq; + + return; + +out_err: + netdev_info(priv->net_dev, + "Error reading Tx FQID, fallback to QDID-based enqueue\n"); + priv->enqueue = dpaa2_eth_enqueue_qd; +} + /* Configure the DPNI object this interface is associated with */ static int setup_dpni(struct fsl_mc_device *ls_dev) { -- cgit v1.2.3 From c9ad4c1049f7e0e8d59e975963dda002af47d93e Mon Sep 17 00:00:00 2001 From: "Ben Dooks (Codethink)" Date: Wed, 16 Oct 2019 09:22:05 +0100 Subject: net: stmmac: fix argument to stmmac_pcs_ctrl_ane() The stmmac_pcs_ctrl_ane() expects a register address as argument 1, but for some reason the mac_device_info is being passed. Fix the warning (and possible bug) from sparse: drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2613:17: warning: incorrect type in argument 1 (different address spaces) drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2613:17: expected void [noderef] *ioaddr drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2613:17: got struct mac_device_info *hw Signed-off-by: Ben Dooks Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 8fa13d43b5bc..3dfd04e0506a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2610,7 +2610,7 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp) } if (priv->hw->pcs) - stmmac_pcs_ctrl_ane(priv, priv->hw, 1, priv->hw->ps, 0); + stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 1, priv->hw->ps, 0); /* set TX and RX rings length */ stmmac_set_rings_length(priv); -- cgit v1.2.3 From 7f238ca984b9c6a89e2339c661440c775d617386 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 16 Oct 2019 15:33:23 +0200 Subject: net: dsa: microchip: Do not reinit mutexes on KSZ87xx The KSZ87xx driver calls mutex_init() on mutexes already inited in ksz_common.c ksz_switch_register(). Do not do it twice, drop the reinitialization. Signed-off-by: Marek Vasut Cc: Andrew Lunn Cc: David S. Miller Cc: Florian Fainelli Cc: George McCollister Cc: Tristram Ha Cc: Woojung Huh Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/ksz8795.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c index a23d3ffdf0c4..24a5e99f7fd5 100644 --- a/drivers/net/dsa/microchip/ksz8795.c +++ b/drivers/net/dsa/microchip/ksz8795.c @@ -1224,10 +1224,6 @@ static int ksz8795_switch_init(struct ksz_device *dev) { int i; - mutex_init(&dev->stats_mutex); - mutex_init(&dev->alu_mutex); - mutex_init(&dev->vlan_mutex); - dev->ds->ops = &ksz8795_switch_ops; for (i = 0; i < ARRAY_SIZE(ksz8795_switch_chips); i++) { -- cgit v1.2.3 From 013572a236ef53cbd1e315e0acf2ee632cc816d4 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 16 Oct 2019 15:33:24 +0200 Subject: net: dsa: microchip: Add shared regmap mutex The KSZ driver uses one regmap per register width (8/16/32), each with it's own lock, but accessing the same set of registers. In theory, it is possible to create a race condition between these regmaps, although the underlying bus (SPI or I2C) locking should assure nothing bad will really happen and the accesses would be correct. To make the driver do the right thing, add one single shared mutex for all the regmaps used by the driver instead. This assures that even if some future hardware is on a bus which does not serialize the accesses the same way SPI or I2C does, nothing bad will happen. Note that the status_mutex was unused and only initied, hence it was renamed and repurposed as the regmap mutex. Signed-off-by: Marek Vasut Cc: Andrew Lunn Cc: David S. Miller Cc: Florian Fainelli Cc: George McCollister Cc: Tristram Ha Cc: Woojung Huh Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/ksz8795_spi.c | 7 ++++--- drivers/net/dsa/microchip/ksz9477_i2c.c | 6 ++++-- drivers/net/dsa/microchip/ksz9477_spi.c | 6 ++++-- drivers/net/dsa/microchip/ksz_common.c | 2 +- drivers/net/dsa/microchip/ksz_common.h | 16 +++++++++++++++- 5 files changed, 28 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dsa/microchip/ksz8795_spi.c b/drivers/net/dsa/microchip/ksz8795_spi.c index d0f8153e86b7..8b00f8e6c02f 100644 --- a/drivers/net/dsa/microchip/ksz8795_spi.c +++ b/drivers/net/dsa/microchip/ksz8795_spi.c @@ -25,6 +25,7 @@ KSZ_REGMAP_TABLE(ksz8795, 16, SPI_ADDR_SHIFT, static int ksz8795_spi_probe(struct spi_device *spi) { + struct regmap_config rc; struct ksz_device *dev; int i, ret; @@ -33,9 +34,9 @@ static int ksz8795_spi_probe(struct spi_device *spi) return -ENOMEM; for (i = 0; i < ARRAY_SIZE(ksz8795_regmap_config); i++) { - dev->regmap[i] = devm_regmap_init_spi(spi, - &ksz8795_regmap_config - [i]); + rc = ksz8795_regmap_config[i]; + rc.lock_arg = &dev->regmap_mutex; + dev->regmap[i] = devm_regmap_init_spi(spi, &rc); if (IS_ERR(dev->regmap[i])) { ret = PTR_ERR(dev->regmap[i]); dev_err(&spi->dev, diff --git a/drivers/net/dsa/microchip/ksz9477_i2c.c b/drivers/net/dsa/microchip/ksz9477_i2c.c index 0b1e01f0873d..fdffd9e0c518 100644 --- a/drivers/net/dsa/microchip/ksz9477_i2c.c +++ b/drivers/net/dsa/microchip/ksz9477_i2c.c @@ -17,6 +17,7 @@ KSZ_REGMAP_TABLE(ksz9477, not_used, 16, 0, 0); static int ksz9477_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *i2c_id) { + struct regmap_config rc; struct ksz_device *dev; int i, ret; @@ -25,8 +26,9 @@ static int ksz9477_i2c_probe(struct i2c_client *i2c, return -ENOMEM; for (i = 0; i < ARRAY_SIZE(ksz9477_regmap_config); i++) { - dev->regmap[i] = devm_regmap_init_i2c(i2c, - &ksz9477_regmap_config[i]); + rc = ksz9477_regmap_config[i]; + rc.lock_arg = &dev->regmap_mutex; + dev->regmap[i] = devm_regmap_init_i2c(i2c, &rc); if (IS_ERR(dev->regmap[i])) { ret = PTR_ERR(dev->regmap[i]); dev_err(&i2c->dev, diff --git a/drivers/net/dsa/microchip/ksz9477_spi.c b/drivers/net/dsa/microchip/ksz9477_spi.c index f4198d6f72be..c5f64959a184 100644 --- a/drivers/net/dsa/microchip/ksz9477_spi.c +++ b/drivers/net/dsa/microchip/ksz9477_spi.c @@ -24,6 +24,7 @@ KSZ_REGMAP_TABLE(ksz9477, 32, SPI_ADDR_SHIFT, static int ksz9477_spi_probe(struct spi_device *spi) { + struct regmap_config rc; struct ksz_device *dev; int i, ret; @@ -32,8 +33,9 @@ static int ksz9477_spi_probe(struct spi_device *spi) return -ENOMEM; for (i = 0; i < ARRAY_SIZE(ksz9477_regmap_config); i++) { - dev->regmap[i] = devm_regmap_init_spi(spi, - &ksz9477_regmap_config[i]); + rc = ksz9477_regmap_config[i]; + rc.lock_arg = &dev->regmap_mutex; + dev->regmap[i] = devm_regmap_init_spi(spi, &rc); if (IS_ERR(dev->regmap[i])) { ret = PTR_ERR(dev->regmap[i]); dev_err(&spi->dev, diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index b0b870f0c252..fe47180c908b 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -436,7 +436,7 @@ int ksz_switch_register(struct ksz_device *dev, } mutex_init(&dev->dev_mutex); - mutex_init(&dev->stats_mutex); + mutex_init(&dev->regmap_mutex); mutex_init(&dev->alu_mutex); mutex_init(&dev->vlan_mutex); diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index 64c2677693d2..a20ebb749377 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -47,7 +47,7 @@ struct ksz_device { const char *name; struct mutex dev_mutex; /* device access */ - struct mutex stats_mutex; /* status access */ + struct mutex regmap_mutex; /* regmap access */ struct mutex alu_mutex; /* ALU access */ struct mutex vlan_mutex; /* vlan access */ const struct ksz_dev_ops *dev_ops; @@ -290,6 +290,18 @@ static inline void ksz_pwrite32(struct ksz_device *dev, int port, int offset, ksz_write32(dev, dev->dev_ops->get_port_addr(port, offset), data); } +static inline void ksz_regmap_lock(void *__mtx) +{ + struct mutex *mtx = __mtx; + mutex_lock(mtx); +} + +static inline void ksz_regmap_unlock(void *__mtx) +{ + struct mutex *mtx = __mtx; + mutex_unlock(mtx); +} + /* Regmap tables generation */ #define KSZ_SPI_OP_RD 3 #define KSZ_SPI_OP_WR 2 @@ -314,6 +326,8 @@ static inline void ksz_pwrite32(struct ksz_device *dev, int port, int offset, .write_flag_mask = \ KSZ_SPI_OP_FLAG_MASK(KSZ_SPI_OP_WR, swp, \ regbits, regpad), \ + .lock = ksz_regmap_lock, \ + .unlock = ksz_regmap_unlock, \ .reg_format_endian = REGMAP_ENDIAN_BIG, \ .val_format_endian = REGMAP_ENDIAN_BIG \ } -- cgit v1.2.3 From 8b95599c55ed24b36cf44a4720067cfe67edbcb4 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 16 Oct 2019 15:35:06 +0200 Subject: net: phy: micrel: Discern KSZ8051 and KSZ8795 PHYs The KSZ8051 PHY and the KSZ8794/KSZ8795/KSZ8765 switch share exactly the same PHY ID. Since KSZ8051 is higher in the ksphy_driver[] list of PHYs in the micrel PHY driver, it is used even with the KSZ87xx switch. This is wrong, since the KSZ8051 configures registers of the PHY which are not present on the simplified KSZ87xx switch PHYs and misconfigures other registers of the KSZ87xx switch PHYs. Fortunatelly, it is possible to tell apart the KSZ8051 PHY from the KSZ87xx switch by checking the Basic Status register Bit 0, which is read-only and indicates presence of the Extended Capability Registers. The KSZ8051 PHY has those registers while the KSZ87xx switch does not. This patch implements simple check for the presence of this bit for both the KSZ8051 PHY and KSZ87xx switch, to let both use the correct PHY driver instance. Fixes: 9d162ed69f51 ("net: phy: micrel: add support for KSZ8795") Signed-off-by: Marek Vasut Cc: Andrew Lunn Cc: David S. Miller Cc: Florian Fainelli Cc: George McCollister Cc: Heiner Kallweit Cc: Sean Nyekjaer Cc: Tristram Ha Cc: Woojung Huh Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 40 ++++++++++++++++++++++++++++++++++++---- 1 file changed, 36 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 2fea5541c35a..a0444e28c6e7 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -341,6 +341,35 @@ static int ksz8041_config_aneg(struct phy_device *phydev) return genphy_config_aneg(phydev); } +static int ksz8051_ksz8795_match_phy_device(struct phy_device *phydev, + const u32 ksz_phy_id) +{ + int ret; + + if ((phydev->phy_id & MICREL_PHY_ID_MASK) != ksz_phy_id) + return 0; + + ret = phy_read(phydev, MII_BMSR); + if (ret < 0) + return ret; + + /* KSZ8051 PHY and KSZ8794/KSZ8795/KSZ8765 switch share the same + * exact PHY ID. However, they can be told apart by the extended + * capability registers presence. The KSZ8051 PHY has them while + * the switch does not. + */ + ret &= BMSR_ERCAP; + if (ksz_phy_id == PHY_ID_KSZ8051) + return ret; + else + return !ret; +} + +static int ksz8051_match_phy_device(struct phy_device *phydev) +{ + return ksz8051_ksz8795_match_phy_device(phydev, PHY_ID_KSZ8051); +} + static int ksz8081_config_init(struct phy_device *phydev) { /* KSZPHY_OMSO_FACTORY_TEST is set at de-assertion of the reset line @@ -364,6 +393,11 @@ static int ksz8061_config_init(struct phy_device *phydev) return kszphy_config_init(phydev); } +static int ksz8795_match_phy_device(struct phy_device *phydev) +{ + return ksz8051_ksz8795_match_phy_device(phydev, PHY_ID_KSZ8795); +} + static int ksz9021_load_values_from_of(struct phy_device *phydev, const struct device_node *of_node, u16 reg, @@ -1017,8 +1051,6 @@ static struct phy_driver ksphy_driver[] = { .suspend = genphy_suspend, .resume = genphy_resume, }, { - .phy_id = PHY_ID_KSZ8051, - .phy_id_mask = MICREL_PHY_ID_MASK, .name = "Micrel KSZ8051", /* PHY_BASIC_FEATURES */ .driver_data = &ksz8051_type, @@ -1029,6 +1061,7 @@ static struct phy_driver ksphy_driver[] = { .get_sset_count = kszphy_get_sset_count, .get_strings = kszphy_get_strings, .get_stats = kszphy_get_stats, + .match_phy_device = ksz8051_match_phy_device, .suspend = genphy_suspend, .resume = genphy_resume, }, { @@ -1141,13 +1174,12 @@ static struct phy_driver ksphy_driver[] = { .suspend = genphy_suspend, .resume = genphy_resume, }, { - .phy_id = PHY_ID_KSZ8795, - .phy_id_mask = MICREL_PHY_ID_MASK, .name = "Micrel KSZ8795", /* PHY_BASIC_FEATURES */ .config_init = kszphy_config_init, .config_aneg = ksz8873mll_config_aneg, .read_status = ksz8873mll_read_status, + .match_phy_device = ksz8795_match_phy_device, .suspend = genphy_suspend, .resume = genphy_resume, }, { -- cgit v1.2.3 From 1d951ba3da67bbc7a9b0e05987e09552c2060e18 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 16 Oct 2019 15:35:07 +0200 Subject: net: phy: micrel: Update KSZ87xx PHY name The KSZ8795 PHY ID is in fact used by KSZ8794/KSZ8795/KSZ8765 switches. Update the PHY ID and name to reflect that, as this family of switches is commonly refered to as KSZ87xx Signed-off-by: Marek Vasut Cc: Andrew Lunn Cc: David S. Miller Cc: Florian Fainelli Cc: George McCollister Cc: Heiner Kallweit Cc: Sean Nyekjaer Cc: Tristram Ha Cc: Woojung Huh Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index a0444e28c6e7..63dedec0433d 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -395,7 +395,7 @@ static int ksz8061_config_init(struct phy_device *phydev) static int ksz8795_match_phy_device(struct phy_device *phydev) { - return ksz8051_ksz8795_match_phy_device(phydev, PHY_ID_KSZ8795); + return ksz8051_ksz8795_match_phy_device(phydev, PHY_ID_KSZ87XX); } static int ksz9021_load_values_from_of(struct phy_device *phydev, @@ -1174,7 +1174,7 @@ static struct phy_driver ksphy_driver[] = { .suspend = genphy_suspend, .resume = genphy_resume, }, { - .name = "Micrel KSZ8795", + .name = "Micrel KSZ87XX Switch", /* PHY_BASIC_FEATURES */ .config_init = kszphy_config_init, .config_aneg = ksz8873mll_config_aneg, -- cgit v1.2.3 From 7de48402faa32298c3551ea32c76ccb4f9d3025d Mon Sep 17 00:00:00 2001 From: Doug Berger Date: Wed, 16 Oct 2019 16:06:29 -0700 Subject: net: bcmgenet: don't set phydev->link from MAC When commit 28b2e0d2cd13 ("net: phy: remove parameter new_link from phy_mac_interrupt()") removed the new_link parameter it set the phydev->link state from the MAC before invoking phy_mac_interrupt(). However, once commit 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status") was added this initialization prevents the proper determination of the connection parameters by the function genphy_read_status(). This commit removes that initialization to restore the proper functionality. Fixes: 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status") Signed-off-by: Doug Berger Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 12cb77ef1081..10d68017ff6c 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -2612,10 +2612,8 @@ static void bcmgenet_irq_task(struct work_struct *work) spin_unlock_irq(&priv->lock); /* Link UP/DOWN event */ - if (status & UMAC_IRQ_LINK_EVENT) { - priv->dev->phydev->link = !!(status & UMAC_IRQ_LINK_UP); + if (status & UMAC_IRQ_LINK_EVENT) phy_mac_interrupt(priv->dev->phydev); - } } /* bcmgenet_isr1: handle Rx and Tx priority queues */ -- cgit v1.2.3 From fe586b823372a9f43f90e2c6aa0573992ce7ccb7 Mon Sep 17 00:00:00 2001 From: Doug Berger Date: Wed, 16 Oct 2019 16:06:30 -0700 Subject: net: phy: bcm7xxx: define soft_reset for 40nm EPHY The internal 40nm EPHYs use a "Workaround for putting the PHY in IDDQ mode." These PHYs require a soft reset to restore functionality after they are powered back up. This commit defines the soft_reset function to use genphy_soft_reset during phy_init_hw to accommodate this. Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Signed-off-by: Doug Berger Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/bcm7xxx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c index 8fc33867e524..af8eabe7a6d4 100644 --- a/drivers/net/phy/bcm7xxx.c +++ b/drivers/net/phy/bcm7xxx.c @@ -572,6 +572,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev) .name = _name, \ /* PHY_BASIC_FEATURES */ \ .flags = PHY_IS_INTERNAL, \ + .soft_reset = genphy_soft_reset, \ .config_init = bcm7xxx_config_init, \ .suspend = bcm7xxx_suspend, \ .resume = bcm7xxx_config_init, \ -- cgit v1.2.3 From 1f515486275a08a17a2c806b844cca18f7de5b34 Mon Sep 17 00:00:00 2001 From: Doug Berger Date: Wed, 16 Oct 2019 16:06:31 -0700 Subject: net: bcmgenet: soft reset 40nm EPHYs before MAC init It turns out that the "Workaround for putting the PHY in IDDQ mode" used by the internal EPHYs on 40nm Set-Top Box chips when powering down puts the interface to the GENET MAC in a state that can cause subsequent MAC resets to be incomplete. Rather than restore the forced soft reset when powering up internal PHYs, this commit moves the invocation of phy_init_hw earlier in the MAC initialization sequence to just before the MAC reset in the open and resume functions. This allows the interface to be stable and allows the MAC resets to be successful. The bcmgenet_mii_probe() function is split in two to accommodate this. The new function bcmgenet_mii_connect() handles the first half of the functionality before the MAC initialization, and the bcmgenet_mii_config() function is extended to provide the remaining PHY configuration following the MAC initialization. Fixes: 484bfa1507bf ("Revert "net: bcmgenet: Software reset EPHY after power on"") Signed-off-by: Doug Berger Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 28 ++++--- drivers/net/ethernet/broadcom/genet/bcmgenet.h | 2 +- drivers/net/ethernet/broadcom/genet/bcmmii.c | 112 +++++++++++-------------- 3 files changed, 69 insertions(+), 73 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 10d68017ff6c..f0937c650e3c 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -2872,6 +2872,12 @@ static int bcmgenet_open(struct net_device *dev) if (priv->internal_phy) bcmgenet_power_up(priv, GENET_POWER_PASSIVE); + ret = bcmgenet_mii_connect(dev); + if (ret) { + netdev_err(dev, "failed to connect to PHY\n"); + goto err_clk_disable; + } + /* take MAC out of reset */ bcmgenet_umac_reset(priv); @@ -2881,6 +2887,12 @@ static int bcmgenet_open(struct net_device *dev) reg = bcmgenet_umac_readl(priv, UMAC_CMD); priv->crc_fwd_en = !!(reg & CMD_CRC_FWD); + ret = bcmgenet_mii_config(dev, true); + if (ret) { + netdev_err(dev, "unsupported PHY\n"); + goto err_disconnect_phy; + } + bcmgenet_set_hw_addr(priv, dev->dev_addr); if (priv->internal_phy) { @@ -2896,7 +2908,7 @@ static int bcmgenet_open(struct net_device *dev) ret = bcmgenet_init_dma(priv); if (ret) { netdev_err(dev, "failed to initialize DMA\n"); - goto err_clk_disable; + goto err_disconnect_phy; } /* Always enable ring 16 - descriptor ring */ @@ -2919,25 +2931,19 @@ static int bcmgenet_open(struct net_device *dev) goto err_irq0; } - ret = bcmgenet_mii_probe(dev); - if (ret) { - netdev_err(dev, "failed to connect to PHY\n"); - goto err_irq1; - } - bcmgenet_netif_start(dev); netif_tx_start_all_queues(dev); return 0; -err_irq1: - free_irq(priv->irq1, priv); err_irq0: free_irq(priv->irq0, priv); err_fini_dma: bcmgenet_dma_teardown(priv); bcmgenet_fini_dma(priv); +err_disconnect_phy: + phy_disconnect(dev->phydev); err_clk_disable: if (priv->internal_phy) bcmgenet_power_down(priv, GENET_POWER_PASSIVE); @@ -3618,6 +3624,8 @@ static int bcmgenet_resume(struct device *d) if (priv->internal_phy) bcmgenet_power_up(priv, GENET_POWER_PASSIVE); + phy_init_hw(dev->phydev); + bcmgenet_umac_reset(priv); init_umac(priv); @@ -3626,8 +3634,6 @@ static int bcmgenet_resume(struct device *d) if (priv->wolopts) clk_disable_unprepare(priv->clk_wol); - phy_init_hw(dev->phydev); - /* Speed settings must be restored */ bcmgenet_mii_config(priv->dev, false); diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h index dbc69d8fa05f..7fbf573d8d52 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h @@ -720,8 +720,8 @@ GENET_IO_MACRO(rbuf, GENET_RBUF_OFF); /* MDIO routines */ int bcmgenet_mii_init(struct net_device *dev); +int bcmgenet_mii_connect(struct net_device *dev); int bcmgenet_mii_config(struct net_device *dev, bool init); -int bcmgenet_mii_probe(struct net_device *dev); void bcmgenet_mii_exit(struct net_device *dev); void bcmgenet_phy_power_set(struct net_device *dev, bool enable); void bcmgenet_mii_setup(struct net_device *dev); diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c index e7c291bf4ed1..17bb8d60a157 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -173,6 +173,46 @@ static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv) bcmgenet_fixed_phy_link_update); } +int bcmgenet_mii_connect(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + struct device_node *dn = priv->pdev->dev.of_node; + struct phy_device *phydev; + u32 phy_flags = 0; + int ret; + + /* Communicate the integrated PHY revision */ + if (priv->internal_phy) + phy_flags = priv->gphy_rev; + + /* Initialize link state variables that bcmgenet_mii_setup() uses */ + priv->old_link = -1; + priv->old_speed = -1; + priv->old_duplex = -1; + priv->old_pause = -1; + + if (dn) { + phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup, + phy_flags, priv->phy_interface); + if (!phydev) { + pr_err("could not attach to PHY\n"); + return -ENODEV; + } + } else { + phydev = dev->phydev; + phydev->dev_flags = phy_flags; + + ret = phy_connect_direct(dev, phydev, bcmgenet_mii_setup, + priv->phy_interface); + if (ret) { + pr_err("could not attach to PHY\n"); + return -ENODEV; + } + } + + return 0; +} + int bcmgenet_mii_config(struct net_device *dev, bool init) { struct bcmgenet_priv *priv = netdev_priv(dev); @@ -266,71 +306,21 @@ int bcmgenet_mii_config(struct net_device *dev, bool init) bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL); } - if (init) - dev_info(kdev, "configuring instance for %s\n", phy_name); - - return 0; -} + if (init) { + linkmode_copy(phydev->advertising, phydev->supported); -int bcmgenet_mii_probe(struct net_device *dev) -{ - struct bcmgenet_priv *priv = netdev_priv(dev); - struct device_node *dn = priv->pdev->dev.of_node; - struct phy_device *phydev; - u32 phy_flags = 0; - int ret; - - /* Communicate the integrated PHY revision */ - if (priv->internal_phy) - phy_flags = priv->gphy_rev; - - /* Initialize link state variables that bcmgenet_mii_setup() uses */ - priv->old_link = -1; - priv->old_speed = -1; - priv->old_duplex = -1; - priv->old_pause = -1; - - if (dn) { - phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup, - phy_flags, priv->phy_interface); - if (!phydev) { - pr_err("could not attach to PHY\n"); - return -ENODEV; - } - } else { - phydev = dev->phydev; - phydev->dev_flags = phy_flags; - - ret = phy_connect_direct(dev, phydev, bcmgenet_mii_setup, - priv->phy_interface); - if (ret) { - pr_err("could not attach to PHY\n"); - return -ENODEV; - } - } + /* The internal PHY has its link interrupts routed to the + * Ethernet MAC ISRs. On GENETv5 there is a hardware issue + * that prevents the signaling of link UP interrupts when + * the link operates at 10Mbps, so fallback to polling for + * those versions of GENET. + */ + if (priv->internal_phy && !GENET_IS_V5(priv)) + phydev->irq = PHY_IGNORE_INTERRUPT; - /* Configure port multiplexer based on what the probed PHY device since - * reading the 'max-speed' property determines the maximum supported - * PHY speed which is needed for bcmgenet_mii_config() to configure - * things appropriately. - */ - ret = bcmgenet_mii_config(dev, true); - if (ret) { - phy_disconnect(dev->phydev); - return ret; + dev_info(kdev, "configuring instance for %s\n", phy_name); } - linkmode_copy(phydev->advertising, phydev->supported); - - /* The internal PHY has its link interrupts routed to the - * Ethernet MAC ISRs. On GENETv5 there is a hardware issue - * that prevents the signaling of link UP interrupts when - * the link operates at 10Mbps, so fallback to polling for - * those versions of GENET. - */ - if (priv->internal_phy && !GENET_IS_V5(priv)) - dev->phydev->irq = PHY_IGNORE_INTERRUPT; - return 0; } -- cgit v1.2.3 From 25382b991d252aed961cd434176240f9de6bb15f Mon Sep 17 00:00:00 2001 From: Doug Berger Date: Wed, 16 Oct 2019 16:06:32 -0700 Subject: net: bcmgenet: reset 40nm EPHY on energy detect The EPHY integrated into the 40nm Set-Top Box devices can falsely detect energy when connected to a disabled peer interface. When the peer interface is enabled the EPHY will detect and report the link as active, but on occasion may get into a state where it is not able to exchange data with the connected GENET MAC. This issue has not been observed when the link parameters are auto-negotiated; however, it has been observed with a manually configured link. It has been empirically determined that issuing a soft reset to the EPHY when energy is detected prevents it from getting into this bad state. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index f0937c650e3c..0f138280315a 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -2018,6 +2018,8 @@ static void bcmgenet_link_intr_enable(struct bcmgenet_priv *priv) */ if (priv->internal_phy) { int0_enable |= UMAC_IRQ_LINK_EVENT; + if (GENET_IS_V1(priv) || GENET_IS_V2(priv) || GENET_IS_V3(priv)) + int0_enable |= UMAC_IRQ_PHY_DET_R; } else if (priv->ext_phy) { int0_enable |= UMAC_IRQ_LINK_EVENT; } else if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) { @@ -2611,9 +2613,14 @@ static void bcmgenet_irq_task(struct work_struct *work) priv->irq0_stat = 0; spin_unlock_irq(&priv->lock); + if (status & UMAC_IRQ_PHY_DET_R && + priv->dev->phydev->autoneg != AUTONEG_ENABLE) + phy_init_hw(priv->dev->phydev); + /* Link UP/DOWN event */ if (status & UMAC_IRQ_LINK_EVENT) phy_mac_interrupt(priv->dev->phydev); + } /* bcmgenet_isr1: handle Rx and Tx priority queues */ @@ -2708,7 +2715,7 @@ static irqreturn_t bcmgenet_isr0(int irq, void *dev_id) } /* all other interested interrupts handled in bottom half */ - status &= UMAC_IRQ_LINK_EVENT; + status &= (UMAC_IRQ_LINK_EVENT | UMAC_IRQ_PHY_DET_R); if (status) { /* Save irq status for bottom-half processing. */ spin_lock_irqsave(&priv->lock, flags); -- cgit v1.2.3 From 2e978795bb4c14293bf6ecf32621d32529706aef Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Thu, 17 Oct 2019 10:11:03 +0300 Subject: mlxsw: spectrum_trap: Push Ethernet header before reporting trap devlink maintains packets and bytes statistics for each trap. Since eth_type_trans() was called to set the skb's protocol, the data pointer no longer points to the start of the packet and the bytes accounting is off by 14 bytes. Fix this by pushing the skb's data pointer to the start of the packet. Fixes: b5ce611fd96e ("mlxsw: spectrum: Add devlink-trap support") Reported-by: Alex Kushnarov Tested-by: Alex Kushnarov Acked-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_trap.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_trap.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_trap.c index 899450b28621..7c03b661ae7e 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_trap.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_trap.c @@ -99,6 +99,7 @@ static void mlxsw_sp_rx_drop_listener(struct sk_buff *skb, u8 local_port, devlink = priv_to_devlink(mlxsw_sp->core); in_devlink_port = mlxsw_core_port_devlink_port_get(mlxsw_sp->core, local_port); + skb_push(skb, ETH_HLEN); devlink_trap_report(devlink, skb, trap_ctx, in_devlink_port); consume_skb(skb); } -- cgit v1.2.3 From 38b4fe320119859c11b1dc06f6b4987a16344fa1 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Thu, 17 Oct 2019 21:29:26 +0200 Subject: net: usb: lan78xx: Connect PHY before registering MAC As soon as the netdev is registers, the kernel can start using the interface. If the driver connects the MAC to the PHY after the netdev is registered, there is a race condition where the interface can be opened without having the PHY connected. Change the order to close this race condition. Fixes: 92571a1aae40 ("lan78xx: Connect phy early") Reported-by: Daniel Wagner Signed-off-by: Andrew Lunn Tested-by: Daniel Wagner Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 58f5a219fb65..62948098191f 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -3782,10 +3782,14 @@ static int lan78xx_probe(struct usb_interface *intf, /* driver requires remote-wakeup capability during autosuspend. */ intf->needs_remote_wakeup = 1; + ret = lan78xx_phy_init(dev); + if (ret < 0) + goto out4; + ret = register_netdev(netdev); if (ret != 0) { netif_err(dev, probe, netdev, "couldn't register the device\n"); - goto out4; + goto out5; } usb_set_intfdata(intf, dev); @@ -3798,14 +3802,10 @@ static int lan78xx_probe(struct usb_interface *intf, pm_runtime_set_autosuspend_delay(&udev->dev, DEFAULT_AUTOSUSPEND_DELAY); - ret = lan78xx_phy_init(dev); - if (ret < 0) - goto out5; - return 0; out5: - unregister_netdev(netdev); + phy_disconnect(netdev->phydev); out4: usb_free_urb(dev->urb_intr); out3: -- cgit v1.2.3 From 580a05f9d4ada3bfb689140d0efec1efdb8a48da Mon Sep 17 00:00:00 2001 From: Yonglong Liu Date: Fri, 18 Oct 2019 11:42:59 +0800 Subject: net: hns3: fix mis-counting IRQ vector numbers issue Currently, the num_msi_left means the vector numbers of NIC, but if the PF supported RoCE, it contains the vector numbers of NIC and RoCE(Not expected). This may cause interrupts lost in some case, because of the NIC module used the vector resources which belongs to RoCE. This patch adds a new variable num_nic_msi to store the vector numbers of NIC, and adjust the default TQP numbers and rss_size according to the value of num_nic_msi. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yonglong Liu Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 ++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 21 +++++++++++++++- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 1 + .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 11 +++++++-- .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 28 +++++++++++++++++++--- .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 1 + 6 files changed, 58 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h index c4b7bf851a28..75ccc1e7076b 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h +++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h @@ -32,6 +32,8 @@ #define HNAE3_MOD_VERSION "1.0" +#define HNAE3_MIN_VECTOR_NUM 2 /* first one for misc, another for IO */ + /* Device IDs */ #define HNAE3_DEV_ID_GE 0xA220 #define HNAE3_DEV_ID_25GE 0xA221 diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index fd7f94372ff0..e02e01bd9eff 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -906,6 +906,9 @@ static int hclge_query_pf_resource(struct hclge_dev *hdev) hnae3_get_field(__le16_to_cpu(req->pf_intr_vector_number), HCLGE_PF_VEC_NUM_M, HCLGE_PF_VEC_NUM_S); + /* nic's msix numbers is always equals to the roce's. */ + hdev->num_nic_msi = hdev->num_roce_msi; + /* PF should have NIC vectors and Roce vectors, * NIC vectors are queued before Roce vectors. */ @@ -915,6 +918,15 @@ static int hclge_query_pf_resource(struct hclge_dev *hdev) hdev->num_msi = hnae3_get_field(__le16_to_cpu(req->pf_intr_vector_number), HCLGE_PF_VEC_NUM_M, HCLGE_PF_VEC_NUM_S); + + hdev->num_nic_msi = hdev->num_msi; + } + + if (hdev->num_nic_msi < HNAE3_MIN_VECTOR_NUM) { + dev_err(&hdev->pdev->dev, + "Just %u msi resources, not enough for pf(min:2).\n", + hdev->num_nic_msi); + return -EINVAL; } return 0; @@ -1507,6 +1519,10 @@ static int hclge_assign_tqp(struct hclge_vport *vport, u16 num_tqps) kinfo->rss_size = min_t(u16, hdev->rss_size_max, vport->alloc_tqps / hdev->tm_info.num_tc); + /* ensure one to one mapping between irq and queue at default */ + kinfo->rss_size = min_t(u16, kinfo->rss_size, + (hdev->num_nic_msi - 1) / hdev->tm_info.num_tc); + return 0; } @@ -2285,7 +2301,8 @@ static int hclge_init_msi(struct hclge_dev *hdev) int vectors; int i; - vectors = pci_alloc_irq_vectors(pdev, 1, hdev->num_msi, + vectors = pci_alloc_irq_vectors(pdev, HNAE3_MIN_VECTOR_NUM, + hdev->num_msi, PCI_IRQ_MSI | PCI_IRQ_MSIX); if (vectors < 0) { dev_err(&pdev->dev, @@ -2300,6 +2317,7 @@ static int hclge_init_msi(struct hclge_dev *hdev) hdev->num_msi = vectors; hdev->num_msi_left = vectors; + hdev->base_msi_vector = pdev->irq; hdev->roce_base_vector = hdev->base_msi_vector + hdev->roce_base_msix_offset; @@ -3903,6 +3921,7 @@ static int hclge_get_vector(struct hnae3_handle *handle, u16 vector_num, int alloc = 0; int i, j; + vector_num = min_t(u16, hdev->num_nic_msi - 1, vector_num); vector_num = min(hdev->num_msi_left, vector_num); for (j = 0; j < vector_num; j++) { diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h index 3e9574a9e22d..c3d56b872ed7 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h @@ -763,6 +763,7 @@ struct hclge_dev { u32 base_msi_vector; u16 *vector_status; int *vector_irq; + u16 num_nic_msi; /* Num of nic vectors for this PF */ u16 num_roce_msi; /* Num of roce vectors for this PF */ int roce_base_vector; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c index 9f0e35f27789..62399cc1c5a6 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c @@ -537,9 +537,16 @@ static void hclge_tm_vport_tc_info_update(struct hclge_vport *vport) kinfo->rss_size = kinfo->req_rss_size; } else if (kinfo->rss_size > max_rss_size || (!kinfo->req_rss_size && kinfo->rss_size < max_rss_size)) { + /* if user not set rss, the rss_size should compare with the + * valid msi numbers to ensure one to one map between tqp and + * irq as default. + */ + if (!kinfo->req_rss_size) + max_rss_size = min_t(u16, max_rss_size, + (hdev->num_nic_msi - 1) / + kinfo->num_tc); + /* Set to the maximum specification value (max_rss_size). */ - dev_info(&hdev->pdev->dev, "rss changes from %d to %d\n", - kinfo->rss_size, max_rss_size); kinfo->rss_size = max_rss_size; } diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index e3090b3dab1d..7d7e712691b9 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -411,6 +411,13 @@ static int hclgevf_knic_setup(struct hclgevf_dev *hdev) kinfo->tqp[i] = &hdev->htqp[i].q; } + /* after init the max rss_size and tqps, adjust the default tqp numbers + * and rss size with the actual vector numbers + */ + kinfo->num_tqps = min_t(u16, hdev->num_nic_msix - 1, kinfo->num_tqps); + kinfo->rss_size = min_t(u16, kinfo->num_tqps / kinfo->num_tc, + kinfo->rss_size); + return 0; } @@ -502,6 +509,7 @@ static int hclgevf_get_vector(struct hnae3_handle *handle, u16 vector_num, int alloc = 0; int i, j; + vector_num = min_t(u16, hdev->num_nic_msix - 1, vector_num); vector_num = min(hdev->num_msi_left, vector_num); for (j = 0; j < vector_num; j++) { @@ -2246,13 +2254,14 @@ static int hclgevf_init_msi(struct hclgevf_dev *hdev) int vectors; int i; - if (hnae3_get_bit(hdev->ae_dev->flag, HNAE3_DEV_SUPPORT_ROCE_B)) + if (hnae3_dev_roce_supported(hdev)) vectors = pci_alloc_irq_vectors(pdev, hdev->roce_base_msix_offset + 1, hdev->num_msi, PCI_IRQ_MSIX); else - vectors = pci_alloc_irq_vectors(pdev, 1, hdev->num_msi, + vectors = pci_alloc_irq_vectors(pdev, HNAE3_MIN_VECTOR_NUM, + hdev->num_msi, PCI_IRQ_MSI | PCI_IRQ_MSIX); if (vectors < 0) { @@ -2268,6 +2277,7 @@ static int hclgevf_init_msi(struct hclgevf_dev *hdev) hdev->num_msi = vectors; hdev->num_msi_left = vectors; + hdev->base_msi_vector = pdev->irq; hdev->roce_base_vector = pdev->irq + hdev->roce_base_msix_offset; @@ -2533,7 +2543,7 @@ static int hclgevf_query_vf_resource(struct hclgevf_dev *hdev) req = (struct hclgevf_query_res_cmd *)desc.data; - if (hnae3_get_bit(hdev->ae_dev->flag, HNAE3_DEV_SUPPORT_ROCE_B)) { + if (hnae3_dev_roce_supported(hdev)) { hdev->roce_base_msix_offset = hnae3_get_field(__le16_to_cpu(req->msixcap_localid_ba_rocee), HCLGEVF_MSIX_OFT_ROCEE_M, @@ -2542,6 +2552,9 @@ static int hclgevf_query_vf_resource(struct hclgevf_dev *hdev) hnae3_get_field(__le16_to_cpu(req->vf_intr_vector_number), HCLGEVF_VEC_NUM_M, HCLGEVF_VEC_NUM_S); + /* nic's msix numbers is always equals to the roce's. */ + hdev->num_nic_msix = hdev->num_roce_msix; + /* VF should have NIC vectors and Roce vectors, NIC vectors * are queued before Roce vectors. The offset is fixed to 64. */ @@ -2551,6 +2564,15 @@ static int hclgevf_query_vf_resource(struct hclgevf_dev *hdev) hdev->num_msi = hnae3_get_field(__le16_to_cpu(req->vf_intr_vector_number), HCLGEVF_VEC_NUM_M, HCLGEVF_VEC_NUM_S); + + hdev->num_nic_msix = hdev->num_msi; + } + + if (hdev->num_nic_msix < HNAE3_MIN_VECTOR_NUM) { + dev_err(&hdev->pdev->dev, + "Just %u msi resources, not enough for vf(min:2).\n", + hdev->num_nic_msix); + return -EINVAL; } return 0; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h index bdde3afc286b..2b8d6bc6d224 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h @@ -270,6 +270,7 @@ struct hclgevf_dev { u16 num_msi; u16 num_msi_left; u16 num_msi_used; + u16 num_nic_msix; /* Num of nic vectors for this VF */ u16 num_roce_msix; /* Num of roce vectors for this VF */ u16 roce_base_msix_offset; int roce_base_vector; -- cgit v1.2.3 From 3d5c1a037d37392a6859afbde49be5ba6a70a6b3 Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Fri, 18 Oct 2019 09:45:49 +0200 Subject: xen/netback: fix error path of xenvif_connect_data() xenvif_connect_data() calls module_put() in case of error. This is wrong as there is no related module_get(). Remove the superfluous module_put(). Fixes: 279f438e36c0a7 ("xen-netback: Don't destroy the netdev until the vif is shut down") Cc: # 3.12 Signed-off-by: Juergen Gross Reviewed-by: Paul Durrant Reviewed-by: Wei Liu Signed-off-by: David S. Miller --- drivers/net/xen-netback/interface.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c index 240f762b3749..103ed00775eb 100644 --- a/drivers/net/xen-netback/interface.c +++ b/drivers/net/xen-netback/interface.c @@ -719,7 +719,6 @@ err_unmap: xenvif_unmap_frontend_data_rings(queue); netif_napi_del(&queue->napi); err: - module_put(THIS_MODULE); return err; } -- cgit v1.2.3 From bd310aca442fcc72731b7acb65d32d05c956d56b Mon Sep 17 00:00:00 2001 From: Michael Tretter Date: Fri, 18 Oct 2019 16:11:43 +0200 Subject: macb: propagate errors when getting optional clocks The tx_clk, rx_clk, and tsu_clk are optional. Currently the macb driver marks clock as not available if it receives an error when trying to get a clock. This is wrong, because a clock controller might return -EPROBE_DEFER if a clock is not available, but will eventually become available. In these cases, the driver would probe successfully but will never be able to adjust the clocks, because the clocks were not available during probe, but became available later. For example, the clock controller for the ZynqMP is implemented in the PMU firmware and the clocks are only available after the firmware driver has been probed. Use devm_clk_get_optional() in instead of devm_clk_get() to get the optional clock and propagate all errors to the calling function. Signed-off-by: Michael Tretter Acked-by: Nicolas Ferre Tested-by: Nicolas Ferre Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb_main.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 8e8d557901a9..1e1b774e1953 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -3405,17 +3405,17 @@ static int macb_clk_init(struct platform_device *pdev, struct clk **pclk, return err; } - *tx_clk = devm_clk_get(&pdev->dev, "tx_clk"); + *tx_clk = devm_clk_get_optional(&pdev->dev, "tx_clk"); if (IS_ERR(*tx_clk)) - *tx_clk = NULL; + return PTR_ERR(*tx_clk); - *rx_clk = devm_clk_get(&pdev->dev, "rx_clk"); + *rx_clk = devm_clk_get_optional(&pdev->dev, "rx_clk"); if (IS_ERR(*rx_clk)) - *rx_clk = NULL; + return PTR_ERR(*rx_clk); - *tsu_clk = devm_clk_get(&pdev->dev, "tsu_clk"); + *tsu_clk = devm_clk_get_optional(&pdev->dev, "tsu_clk"); if (IS_ERR(*tsu_clk)) - *tsu_clk = NULL; + return PTR_ERR(*tsu_clk); err = clk_prepare_enable(*pclk); if (err) { -- cgit v1.2.3 From 3d00cf2fbb61212f47a3cf838be51c921366c937 Mon Sep 17 00:00:00 2001 From: Chenwandun Date: Fri, 18 Oct 2019 18:20:37 +0800 Subject: net: aquantia: add an error handling in aq_nic_set_multicast_list add an error handling in aq_nic_set_multicast_list, it may not work when hw_multicast_list_set error; and at the same time it will remove gcc Wunused-but-set-variable warning. Signed-off-by: Chenwandun Reviewed-by: Igor Russkikh Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index 2a18439b36fb..137c1de4c6ec 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -664,6 +664,8 @@ int aq_nic_set_multicast_list(struct aq_nic_s *self, struct net_device *ndev) err = hw_ops->hw_multicast_list_set(self->aq_hw, self->mc_list.ar, self->mc_list.count); + if (err < 0) + return err; } return aq_nic_set_packet_filter(self, packet_filter); } -- cgit v1.2.3 From 05908d72cc8fa39058cd9535db2833089cc3df6f Mon Sep 17 00:00:00 2001 From: Mans Rullgard Date: Fri, 18 Oct 2019 17:56:58 +0100 Subject: net: ethernet: dwmac-sun8i: show message only when switching to promisc Printing the info message every time more than the max number of mac addresses are requested generates unnecessary log spam. Showing it only when the hw is not already in promiscous mode is equally informative without being annoying. Signed-off-by: Mans Rullgard Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c index f97a4096f8fc..ddcc191febdb 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c @@ -651,7 +651,8 @@ static void sun8i_dwmac_set_filter(struct mac_device_info *hw, } } } else { - netdev_info(dev, "Too many address, switching to promiscuous\n"); + if (!(readl(ioaddr + EMAC_RX_FRM_FLT) & EMAC_FRM_FLT_RXALL)) + netdev_info(dev, "Too many address, switching to promiscuous\n"); v = EMAC_FRM_FLT_RXALL; } -- cgit v1.2.3