From b518b0c8534fb09760605253b53b44c97f2963d9 Mon Sep 17 00:00:00 2001 From: "Agrawal, Nitesh-kumar" Date: Tue, 26 Jul 2016 08:28:19 +0000 Subject: pinctrl/amd: Remove the default de-bounce time MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 8cf4345575a416e6856a6856ac6eaa31ad883126 upstream. In the function amd_gpio_irq_enable() and amd_gpio_direction_input(), remove the code which is setting the default de-bounce time to 2.75ms. The driver code shall use the same settings as specified in BIOS. Any default assignment impacts TouchPad behaviour when the LevelTrig is set to EDGE FALLING. Reviewed-by:  Ken Xue Signed-off-by: Nitesh Kumar Agrawal Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman --- drivers/pinctrl/pinctrl-amd.c | 20 -------------------- 1 file changed, 20 deletions(-) (limited to 'drivers/pinctrl') diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c index 3318f1d6193c..7340ff78839a 100644 --- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -48,17 +48,6 @@ static int amd_gpio_direction_input(struct gpio_chip *gc, unsigned offset) spin_lock_irqsave(&gpio_dev->lock, flags); pin_reg = readl(gpio_dev->base + offset * 4); - /* - * Suppose BIOS or Bootloader sets specific debounce for the - * GPIO. if not, set debounce to be 2.75ms and remove glitch. - */ - if ((pin_reg & DB_TMR_OUT_MASK) == 0) { - pin_reg |= 0xf; - pin_reg |= BIT(DB_TMR_OUT_UNIT_OFF); - pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF; - pin_reg &= ~BIT(DB_TMR_LARGE_OFF); - } - pin_reg &= ~BIT(OUTPUT_ENABLE_OFF); writel(pin_reg, gpio_dev->base + offset * 4); spin_unlock_irqrestore(&gpio_dev->lock, flags); @@ -331,15 +320,6 @@ static void amd_gpio_irq_enable(struct irq_data *d) spin_lock_irqsave(&gpio_dev->lock, flags); pin_reg = readl(gpio_dev->base + (d->hwirq)*4); - /* - Suppose BIOS or Bootloader sets specific debounce for the - GPIO. if not, set debounce to be 2.75ms. - */ - if ((pin_reg & DB_TMR_OUT_MASK) == 0) { - pin_reg |= 0xf; - pin_reg |= BIT(DB_TMR_OUT_UNIT_OFF); - pin_reg &= ~BIT(DB_TMR_LARGE_OFF); - } pin_reg |= BIT(INTERRUPT_ENABLE_OFF); pin_reg |= BIT(INTERRUPT_MASK_OFF); writel(pin_reg, gpio_dev->base + (d->hwirq)*4); -- cgit v1.2.3