From a032fe30cf09b6723ab61a05aee057311b00f9e1 Mon Sep 17 00:00:00 2001 From: Dongcheng Yan Date: Fri, 25 Apr 2025 18:43:30 +0800 Subject: platform/x86: int3472: add hpd pin support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Typically HDMI to MIPI CSI-2 bridges have a pin to signal image data is being received. On the host side this is wired to a GPIO for polling or interrupts. This includes the Lontium HDMI to MIPI CSI-2 bridges lt6911uxe and lt6911uxc. The GPIO "hpd" is used already by other HDMI to CSI-2 bridges, use it here as well. Signed-off-by: Dongcheng Yan Reviewed-by: Sakari Ailus Acked-by: Ilpo Järvinen Reviewed-by: Hans de Goede Reviewed-by: Andy Shevchenko Fixes: 20244cbafbd6 ("media: i2c: change lt6911uxe irq_gpio name to "hpd"") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil --- drivers/platform/x86/intel/int3472/discrete.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/platform/x86/intel/int3472/discrete.c') diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c index 4c0aed6e626f..bdfb8a800c54 100644 --- a/drivers/platform/x86/intel/int3472/discrete.c +++ b/drivers/platform/x86/intel/int3472/discrete.c @@ -193,6 +193,10 @@ static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3 *con_id = "privacy-led"; *gpio_flags = GPIO_ACTIVE_HIGH; break; + case INT3472_GPIO_TYPE_HOTPLUG_DETECT: + *con_id = "hpd"; + *gpio_flags = GPIO_ACTIVE_HIGH; + break; case INT3472_GPIO_TYPE_POWER_ENABLE: *con_id = "avdd"; *gpio_flags = GPIO_ACTIVE_HIGH; @@ -223,6 +227,7 @@ static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3 * 0x0b Power enable * 0x0c Clock enable * 0x0d Privacy LED + * 0x13 Hotplug detect * * There are some known platform specific quirks where that does not quite * hold up; for example where a pin with type 0x01 (Power down) is mapped to @@ -292,6 +297,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, switch (type) { case INT3472_GPIO_TYPE_RESET: case INT3472_GPIO_TYPE_POWERDOWN: + case INT3472_GPIO_TYPE_HOTPLUG_DETECT: ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, con_id, gpio_flags); if (ret) err_msg = "Failed to map GPIO pin to sensor\n"; -- cgit v1.2.3