From 077eaf5b40ecb2c345d82f02275c20e965dfa3e5 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 12 Nov 2008 13:27:04 -0800 Subject: rtc: rtc-wm8350: add support for WM8350 RTC This adds support for the RTC provided by the Wolfson Microelectronics WM8350. This driver was originally written by Graeme Gregory and Liam Girdwood, though it has been modified since then to update it to current mainline coding standards and for API completeness. [akpm@linux-foundation.org: s/schedule_timeout_interruptible/schedule_timeout_uninterruptible/ to prevent bogus timeout when signal_pending()] Signed-off-by: Mark Brown Cc: Alessandro Zummo Cc: David Brownell Cc: Liam Girdwood Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/Kconfig | 10 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-wm8350.c | 514 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 525 insertions(+) create mode 100644 drivers/rtc/rtc-wm8350.c (limited to 'drivers/rtc') diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 8abbb2020af9..7951ad2fd995 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -468,6 +468,16 @@ config RTC_DRV_V3020 This driver can also be built as a module. If so, the module will be called rtc-v3020. +config RTC_DRV_WM8350 + tristate "Wolfson Microelectronics WM8350 RTC" + depends on MFD_WM8350 + help + If you say yes here you will get support for the RTC subsystem + of the Wolfson Microelectronics WM8350. + + This driver can also be built as a module. If so, the module + will be called "rtc-wm8350". + comment "on-CPU RTC drivers" config RTC_DRV_OMAP diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index e9e8474cc8fe..7a41201e7efd 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -66,4 +66,5 @@ obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl4030.o obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o +obj-$(CONFIG_RTC_DRV_WM8350) += rtc-wm8350.o obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o diff --git a/drivers/rtc/rtc-wm8350.c b/drivers/rtc/rtc-wm8350.c new file mode 100644 index 000000000000..5c5e3aa91385 --- /dev/null +++ b/drivers/rtc/rtc-wm8350.c @@ -0,0 +1,514 @@ +/* + * Real Time Clock driver for Wolfson Microelectronics WM8350 + * + * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood + * linux@wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define WM8350_SET_ALM_RETRIES 5 +#define WM8350_SET_TIME_RETRIES 5 +#define WM8350_GET_TIME_RETRIES 5 + +#define to_wm8350_from_rtc_dev(d) container_of(d, struct wm8350, rtc.pdev.dev) + +/* + * Read current time and date in RTC + */ +static int wm8350_rtc_readtime(struct device *dev, struct rtc_time *tm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + u16 time1[4], time2[4]; + int retries = WM8350_GET_TIME_RETRIES, ret; + + /* + * Read the time twice and compare. + * If time1 == time2, then time is valid else retry. + */ + do { + ret = wm8350_block_read(wm8350, WM8350_RTC_SECONDS_MINUTES, + 4, time1); + if (ret < 0) + return ret; + ret = wm8350_block_read(wm8350, WM8350_RTC_SECONDS_MINUTES, + 4, time2); + if (ret < 0) + return ret; + + if (memcmp(time1, time2, sizeof(time1)) == 0) { + tm->tm_sec = time1[0] & WM8350_RTC_SECS_MASK; + + tm->tm_min = (time1[0] & WM8350_RTC_MINS_MASK) + >> WM8350_RTC_MINS_SHIFT; + + tm->tm_hour = time1[1] & WM8350_RTC_HRS_MASK; + + tm->tm_wday = ((time1[1] >> WM8350_RTC_DAY_SHIFT) + & 0x7) - 1; + + tm->tm_mon = ((time1[2] & WM8350_RTC_MTH_MASK) + >> WM8350_RTC_MTH_SHIFT) - 1; + + tm->tm_mday = (time1[2] & WM8350_RTC_DATE_MASK); + + tm->tm_year = ((time1[3] & WM8350_RTC_YHUNDREDS_MASK) + >> WM8350_RTC_YHUNDREDS_SHIFT) * 100; + tm->tm_year += time1[3] & WM8350_RTC_YUNITS_MASK; + + tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, + tm->tm_year); + tm->tm_year -= 1900; + + dev_dbg(dev, "Read (%d left): %04x %04x %04x %04x\n", + retries, + time1[0], time1[1], time1[2], time1[3]); + + return 0; + } + } while (retries--); + + dev_err(dev, "timed out reading RTC time\n"); + return -EIO; +} + +/* + * Set current time and date in RTC + */ +static int wm8350_rtc_settime(struct device *dev, struct rtc_time *tm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + u16 time[4]; + u16 rtc_ctrl; + int ret, retries = WM8350_SET_TIME_RETRIES; + + time[0] = tm->tm_sec; + time[0] |= tm->tm_min << WM8350_RTC_MINS_SHIFT; + time[1] = tm->tm_hour; + time[1] |= (tm->tm_wday + 1) << WM8350_RTC_DAY_SHIFT; + time[2] = tm->tm_mday; + time[2] |= (tm->tm_mon + 1) << WM8350_RTC_MTH_SHIFT; + time[3] = ((tm->tm_year + 1900) / 100) << WM8350_RTC_YHUNDREDS_SHIFT; + time[3] |= (tm->tm_year + 1900) % 100; + + dev_dbg(dev, "Setting: %04x %04x %04x %04x\n", + time[0], time[1], time[2], time[3]); + + /* Set RTC_SET to stop the clock */ + ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, WM8350_RTC_SET); + if (ret < 0) + return ret; + + /* Wait until confirmation of stopping */ + do { + rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + schedule_timeout_uninterruptible(msecs_to_jiffies(1)); + } while (retries-- && !(rtc_ctrl & WM8350_RTC_STS)); + + if (!retries) { + dev_err(dev, "timed out on set confirmation\n"); + return -EIO; + } + + /* Write time to RTC */ + ret = wm8350_block_write(wm8350, WM8350_RTC_SECONDS_MINUTES, 4, time); + if (ret < 0) + return ret; + + /* Clear RTC_SET to start the clock */ + ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_SET); + return ret; +} + +/* + * Read alarm time and date in RTC + */ +static int wm8350_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + struct rtc_time *tm = &alrm->time; + u16 time[4]; + int ret; + + ret = wm8350_block_read(wm8350, WM8350_ALARM_SECONDS_MINUTES, 4, time); + if (ret < 0) + return ret; + + tm->tm_sec = time[0] & WM8350_RTC_ALMSECS_MASK; + if (tm->tm_sec == WM8350_RTC_ALMSECS_MASK) + tm->tm_sec = -1; + + tm->tm_min = time[0] & WM8350_RTC_ALMMINS_MASK; + if (tm->tm_min == WM8350_RTC_ALMMINS_MASK) + tm->tm_min = -1; + else + tm->tm_min >>= WM8350_RTC_ALMMINS_SHIFT; + + tm->tm_hour = time[1] & WM8350_RTC_ALMHRS_MASK; + if (tm->tm_hour == WM8350_RTC_ALMHRS_MASK) + tm->tm_hour = -1; + + tm->tm_wday = ((time[1] >> WM8350_RTC_ALMDAY_SHIFT) & 0x7) - 1; + if (tm->tm_wday > 7) + tm->tm_wday = -1; + + tm->tm_mon = time[2] & WM8350_RTC_ALMMTH_MASK; + if (tm->tm_mon == WM8350_RTC_ALMMTH_MASK) + tm->tm_mon = -1; + else + tm->tm_mon = (tm->tm_mon >> WM8350_RTC_ALMMTH_SHIFT) - 1; + + tm->tm_mday = (time[2] & WM8350_RTC_ALMDATE_MASK); + if (tm->tm_mday == WM8350_RTC_ALMDATE_MASK) + tm->tm_mday = -1; + + tm->tm_year = -1; + + alrm->enabled = !(time[3] & WM8350_RTC_ALMSTS); + + return 0; +} + +static int wm8350_rtc_stop_alarm(struct wm8350 *wm8350) +{ + int retries = WM8350_SET_ALM_RETRIES; + u16 rtc_ctrl; + int ret; + + /* Set RTC_SET to stop the clock */ + ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_ALMSET); + if (ret < 0) + return ret; + + /* Wait until confirmation of stopping */ + do { + rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + schedule_timeout_uninterruptible(msecs_to_jiffies(1)); + } while (retries-- && !(rtc_ctrl & WM8350_RTC_ALMSTS)); + + if (!(rtc_ctrl & WM8350_RTC_ALMSTS)) + return -ETIMEDOUT; + + return 0; +} + +static int wm8350_rtc_start_alarm(struct wm8350 *wm8350) +{ + int ret; + int retries = WM8350_SET_ALM_RETRIES; + u16 rtc_ctrl; + + ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_ALMSET); + if (ret < 0) + return ret; + + /* Wait until confirmation */ + do { + rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + schedule_timeout_uninterruptible(msecs_to_jiffies(1)); + } while (retries-- && rtc_ctrl & WM8350_RTC_ALMSTS); + + if (rtc_ctrl & WM8350_RTC_ALMSTS) + return -ETIMEDOUT; + + return 0; +} + +static int wm8350_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + struct rtc_time *tm = &alrm->time; + u16 time[3]; + int ret; + + memset(time, 0, sizeof(time)); + + if (tm->tm_sec != -1) + time[0] |= tm->tm_sec; + else + time[0] |= WM8350_RTC_ALMSECS_MASK; + + if (tm->tm_min != -1) + time[0] |= tm->tm_min << WM8350_RTC_ALMMINS_SHIFT; + else + time[0] |= WM8350_RTC_ALMMINS_MASK; + + if (tm->tm_hour != -1) + time[1] |= tm->tm_hour; + else + time[1] |= WM8350_RTC_ALMHRS_MASK; + + if (tm->tm_wday != -1) + time[1] |= (tm->tm_wday + 1) << WM8350_RTC_ALMDAY_SHIFT; + else + time[1] |= WM8350_RTC_ALMDAY_MASK; + + if (tm->tm_mday != -1) + time[2] |= tm->tm_mday; + else + time[2] |= WM8350_RTC_ALMDATE_MASK; + + if (tm->tm_mon != -1) + time[2] |= (tm->tm_mon + 1) << WM8350_RTC_ALMMTH_SHIFT; + else + time[2] |= WM8350_RTC_ALMMTH_MASK; + + ret = wm8350_rtc_stop_alarm(wm8350); + if (ret < 0) + return ret; + + /* Write time to RTC */ + ret = wm8350_block_write(wm8350, WM8350_ALARM_SECONDS_MINUTES, + 3, time); + if (ret < 0) + return ret; + + if (alrm->enabled) + ret = wm8350_rtc_start_alarm(wm8350); + + return ret; +} + +/* + * Handle commands from user-space + */ +static int wm8350_rtc_ioctl(struct device *dev, unsigned int cmd, + unsigned long arg) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + + switch (cmd) { + case RTC_AIE_OFF: + return wm8350_rtc_stop_alarm(wm8350); + case RTC_AIE_ON: + return wm8350_rtc_start_alarm(wm8350); + + case RTC_UIE_OFF: + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC); + break; + case RTC_UIE_ON: + wm8350_unmask_irq(wm8350, WM8350_IRQ_RTC_SEC); + break; + + default: + return -ENOIOCTLCMD; + } + + return 0; +} + +static void wm8350_rtc_alarm_handler(struct wm8350 *wm8350, int irq, + void *data) +{ + struct rtc_device *rtc = wm8350->rtc.rtc; + int ret; + + rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF); + + /* Make it one shot */ + ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_ALMSET); + if (ret != 0) { + dev_err(&(wm8350->rtc.pdev->dev), + "Failed to disable alarm: %d\n", ret); + } +} + +static void wm8350_rtc_update_handler(struct wm8350 *wm8350, int irq, + void *data) +{ + struct rtc_device *rtc = wm8350->rtc.rtc; + + rtc_update_irq(rtc, 1, RTC_IRQF | RTC_UF); +} + +static const struct rtc_class_ops wm8350_rtc_ops = { + .ioctl = wm8350_rtc_ioctl, + .read_time = wm8350_rtc_readtime, + .set_time = wm8350_rtc_settime, + .read_alarm = wm8350_rtc_readalarm, + .set_alarm = wm8350_rtc_setalarm, +}; + +#ifdef CONFIG_PM +static int wm8350_rtc_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev); + int ret = 0; + u16 reg; + + reg = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + + if (device_may_wakeup(&wm8350->rtc.pdev->dev) && + reg & WM8350_RTC_ALMSTS) { + ret = wm8350_rtc_stop_alarm(wm8350); + if (ret != 0) + dev_err(&pdev->dev, "Failed to stop RTC alarm: %d\n", + ret); + } + + return ret; +} + +static int wm8350_rtc_resume(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev); + int ret; + + if (wm8350->rtc.alarm_enabled) { + ret = wm8350_rtc_start_alarm(wm8350); + if (ret != 0) + dev_err(&pdev->dev, + "Failed to restart RTC alarm: %d\n", ret); + } + + return 0; +} + +#else +#define wm8350_rtc_suspend NULL +#define wm8350_rtc_resume NULL +#endif + +static int wm8350_rtc_probe(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + struct wm8350_rtc *wm_rtc = &wm8350->rtc; + int ret = 0; + u16 timectl, power5; + + timectl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + if (timectl & WM8350_RTC_BCD) { + dev_err(&pdev->dev, "RTC BCD mode not supported\n"); + return -EINVAL; + } + if (timectl & WM8350_RTC_12HR) { + dev_err(&pdev->dev, "RTC 12 hour mode not supported\n"); + return -EINVAL; + } + + /* enable the RTC if it's not already enabled */ + power5 = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5); + if (!(power5 & WM8350_RTC_TICK_ENA)) { + dev_info(wm8350->dev, "Starting RTC\n"); + + wm8350_reg_unlock(wm8350); + + ret = wm8350_set_bits(wm8350, WM8350_POWER_MGMT_5, + WM8350_RTC_TICK_ENA); + if (ret < 0) { + dev_err(&pdev->dev, "failed to enable RTC: %d\n", ret); + return ret; + } + + wm8350_reg_lock(wm8350); + } + + if (timectl & WM8350_RTC_STS) { + int retries; + + ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_SET); + if (ret < 0) { + dev_err(&pdev->dev, "failed to start: %d\n", ret); + return ret; + } + + retries = WM8350_SET_TIME_RETRIES; + do { + timectl = wm8350_reg_read(wm8350, + WM8350_RTC_TIME_CONTROL); + } while (timectl & WM8350_RTC_STS && retries--); + + if (retries == 0) { + dev_err(&pdev->dev, "failed to start: timeout\n"); + return -ENODEV; + } + } + + device_init_wakeup(&pdev->dev, 1); + + wm_rtc->rtc = rtc_device_register("wm8350", &pdev->dev, + &wm8350_rtc_ops, THIS_MODULE); + if (IS_ERR(wm_rtc->rtc)) { + ret = PTR_ERR(wm_rtc->rtc); + dev_err(&pdev->dev, "failed to register RTC: %d\n", ret); + return ret; + } + + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC); + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_PER); + + wm8350_register_irq(wm8350, WM8350_IRQ_RTC_SEC, + wm8350_rtc_update_handler, NULL); + + wm8350_register_irq(wm8350, WM8350_IRQ_RTC_ALM, + wm8350_rtc_alarm_handler, NULL); + wm8350_unmask_irq(wm8350, WM8350_IRQ_RTC_ALM); + + return 0; +} + +static int __devexit wm8350_rtc_remove(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + struct wm8350_rtc *wm_rtc = &wm8350->rtc; + + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC); + + wm8350_free_irq(wm8350, WM8350_IRQ_RTC_SEC); + wm8350_free_irq(wm8350, WM8350_IRQ_RTC_ALM); + + rtc_device_unregister(wm_rtc->rtc); + + return 0; +} + +static struct platform_driver wm8350_rtc_driver = { + .probe = wm8350_rtc_probe, + .remove = __devexit_p(wm8350_rtc_remove), + .suspend = wm8350_rtc_suspend, + .resume = wm8350_rtc_resume, + .driver = { + .name = "wm8350-rtc", + }, +}; + +static int __init wm8350_rtc_init(void) +{ + return platform_driver_register(&wm8350_rtc_driver); +} +module_init(wm8350_rtc_init); + +static void __exit wm8350_rtc_exit(void) +{ + platform_driver_unregister(&wm8350_rtc_driver); +} +module_exit(wm8350_rtc_exit); + +MODULE_AUTHOR("Mark Brown "); +MODULE_DESCRIPTION("RTC driver for the WM8350"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm8350-rtc"); -- cgit v1.2.3 From a7fa9851b6dd18824320c4129f26947b3cdb63d8 Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Wed, 12 Nov 2008 13:27:06 -0800 Subject: rtc: basic implementation of Epson RX-8581 I2C Real Time Clock Provide the basic "get" and "set" functionality for the Epson RX-8581 I2C RTC. It currently does not support the RTC's Alarm or Fixed-cycle timer. [akpm@linux-foundation.org: need log2.h for ilog2(), remove unneeded initialisation] Signed-off-by: Martyn Welch Signed-off-by: Alessandro Zummo Cc: David Brownell Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/Kconfig | 8 ++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-rx8581.c | 281 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 290 insertions(+) create mode 100644 drivers/rtc/rtc-rx8581.c (limited to 'drivers/rtc') diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 7951ad2fd995..990020c1dae9 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -277,6 +277,14 @@ config RTC_DRV_FM3130 This driver can also be built as a module. If so the module will be called rtc-fm3130. +config RTC_DRV_RX8581 + tristate "Epson RX-8581" + help + If you say yes here you will get support for the Epson RX-8581. + + This driver can also be built as a module. If so the module + will be called rtc-rx8581. + endif # I2C comment "SPI RTC drivers" diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 7a41201e7efd..16368600643c 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -57,6 +57,7 @@ obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o +obj-$(CONFIG_RTC_DRV_RX8581) += rtc-rx8581.o obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o obj-$(CONFIG_RTC_DRV_SA1100) += rtc-sa1100.o diff --git a/drivers/rtc/rtc-rx8581.c b/drivers/rtc/rtc-rx8581.c new file mode 100644 index 000000000000..c9522f3bc21c --- /dev/null +++ b/drivers/rtc/rtc-rx8581.c @@ -0,0 +1,281 @@ +/* + * An I2C driver for the Epson RX8581 RTC + * + * Author: Martyn Welch + * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Based on: rtc-pcf8563.c (An I2C driver for the Philips PCF8563 RTC) + * Copyright 2005-06 Tower Technologies + */ + +#include +#include +#include +#include +#include + +#define DRV_VERSION "0.1" + +#define RX8581_REG_SC 0x00 /* Second in BCD */ +#define RX8581_REG_MN 0x01 /* Minute in BCD */ +#define RX8581_REG_HR 0x02 /* Hour in BCD */ +#define RX8581_REG_DW 0x03 /* Day of Week */ +#define RX8581_REG_DM 0x04 /* Day of Month in BCD */ +#define RX8581_REG_MO 0x05 /* Month in BCD */ +#define RX8581_REG_YR 0x06 /* Year in BCD */ +#define RX8581_REG_RAM 0x07 /* RAM */ +#define RX8581_REG_AMN 0x08 /* Alarm Min in BCD*/ +#define RX8581_REG_AHR 0x09 /* Alarm Hour in BCD */ +#define RX8581_REG_ADM 0x0A +#define RX8581_REG_ADW 0x0A +#define RX8581_REG_TMR0 0x0B +#define RX8581_REG_TMR1 0x0C +#define RX8581_REG_EXT 0x0D /* Extension Register */ +#define RX8581_REG_FLAG 0x0E /* Flag Register */ +#define RX8581_REG_CTRL 0x0F /* Control Register */ + + +/* Flag Register bit definitions */ +#define RX8581_FLAG_UF 0x20 /* Update */ +#define RX8581_FLAG_TF 0x10 /* Timer */ +#define RX8581_FLAG_AF 0x08 /* Alarm */ +#define RX8581_FLAG_VLF 0x02 /* Voltage Low */ + +/* Control Register bit definitions */ +#define RX8581_CTRL_UIE 0x20 /* Update Interrupt Enable */ +#define RX8581_CTRL_TIE 0x10 /* Timer Interrupt Enable */ +#define RX8581_CTRL_AIE 0x08 /* Alarm Interrupt Enable */ +#define RX8581_CTRL_STOP 0x02 /* STOP bit */ +#define RX8581_CTRL_RESET 0x01 /* RESET bit */ + +static struct i2c_driver rx8581_driver; + +/* + * In the routines that deal directly with the rx8581 hardware, we use + * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. + */ +static int rx8581_get_datetime(struct i2c_client *client, struct rtc_time *tm) +{ + unsigned char date[7]; + int data, err; + + /* First we ensure that the "update flag" is not set, we read the + * time and date then re-read the "update flag". If the update flag + * has been set, we know that the time has changed during the read so + * we repeat the whole process again. + */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG); + if (data < 0) { + dev_err(&client->dev, "Unable to read device flags\n"); + return -EIO; + } + + do { + /* If update flag set, clear it */ + if (data & RX8581_FLAG_UF) { + err = i2c_smbus_write_byte_data(client, + RX8581_REG_FLAG, (data & ~RX8581_FLAG_UF)); + if (err != 0) { + dev_err(&client->dev, "Unable to write device " + "flags\n"); + return -EIO; + } + } + + /* Now read time and date */ + err = i2c_smbus_read_i2c_block_data(client, RX8581_REG_SC, + 7, date); + if (err < 0) { + dev_err(&client->dev, "Unable to read date\n"); + return -EIO; + } + + /* Check flag register */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG); + if (data < 0) { + dev_err(&client->dev, "Unable to read device flags\n"); + return -EIO; + } + } while (data & RX8581_FLAG_UF); + + if (data & RX8581_FLAG_VLF) + dev_info(&client->dev, + "low voltage detected, date/time is not reliable.\n"); + + dev_dbg(&client->dev, + "%s: raw data is sec=%02x, min=%02x, hr=%02x, " + "wday=%02x, mday=%02x, mon=%02x, year=%02x\n", + __func__, + date[0], date[1], date[2], date[3], date[4], date[5], date[6]); + + tm->tm_sec = bcd2bin(date[RX8581_REG_SC] & 0x7F); + tm->tm_min = bcd2bin(date[RX8581_REG_MN] & 0x7F); + tm->tm_hour = bcd2bin(date[RX8581_REG_HR] & 0x3F); /* rtc hr 0-23 */ + tm->tm_wday = ilog2(date[RX8581_REG_DW] & 0x7F); + tm->tm_mday = bcd2bin(date[RX8581_REG_DM] & 0x3F); + tm->tm_mon = bcd2bin(date[RX8581_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */ + tm->tm_year = bcd2bin(date[RX8581_REG_YR]); + if (tm->tm_year < 70) + tm->tm_year += 100; /* assume we are in 1970...2069 */ + + + dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __func__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + err = rtc_valid_tm(tm); + if (err < 0) + dev_err(&client->dev, "retrieved date/time is not valid.\n"); + + return err; +} + +static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm) +{ + int data, err; + unsigned char buf[7]; + + dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __func__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + /* hours, minutes and seconds */ + buf[RX8581_REG_SC] = bin2bcd(tm->tm_sec); + buf[RX8581_REG_MN] = bin2bcd(tm->tm_min); + buf[RX8581_REG_HR] = bin2bcd(tm->tm_hour); + + buf[RX8581_REG_DM] = bin2bcd(tm->tm_mday); + + /* month, 1 - 12 */ + buf[RX8581_REG_MO] = bin2bcd(tm->tm_mon + 1); + + /* year and century */ + buf[RX8581_REG_YR] = bin2bcd(tm->tm_year % 100); + buf[RX8581_REG_DW] = (0x1 << tm->tm_wday); + + /* Stop the clock */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL); + if (data < 0) { + dev_err(&client->dev, "Unable to read control register\n"); + return -EIO; + } + + err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG, + (data | RX8581_CTRL_STOP)); + if (err < 0) { + dev_err(&client->dev, "Unable to write control register\n"); + return -EIO; + } + + /* write register's data */ + err = i2c_smbus_write_i2c_block_data(client, RX8581_REG_SC, 7, buf); + if (err < 0) { + dev_err(&client->dev, "Unable to write to date registers\n"); + return -EIO; + } + + /* Restart the clock */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL); + if (data < 0) { + dev_err(&client->dev, "Unable to read control register\n"); + return -EIO; + } + + err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG, + (data | ~(RX8581_CTRL_STOP))); + if (err != 0) { + dev_err(&client->dev, "Unable to write control register\n"); + return -EIO; + } + + return 0; +} + +static int rx8581_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + return rx8581_get_datetime(to_i2c_client(dev), tm); +} + +static int rx8581_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + return rx8581_set_datetime(to_i2c_client(dev), tm); +} + +static const struct rtc_class_ops rx8581_rtc_ops = { + .read_time = rx8581_rtc_read_time, + .set_time = rx8581_rtc_set_time, +}; + +static int __devinit rx8581_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct rtc_device *rtc; + + dev_dbg(&client->dev, "%s\n", __func__); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -ENODEV; + + dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); + + rtc = rtc_device_register(rx8581_driver.driver.name, + &client->dev, &rx8581_rtc_ops, THIS_MODULE); + + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + i2c_set_clientdata(client, rtc); + + return 0; +} + +static int __devexit rx8581_remove(struct i2c_client *client) +{ + struct rtc_device *rtc = i2c_get_clientdata(client); + + rtc_device_unregister(rtc); + + return 0; +} + +static const struct i2c_device_id rx8581_id[] = { + { "rx8581", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, rx8581_id); + +static struct i2c_driver rx8581_driver = { + .driver = { + .name = "rtc-rx8581", + .owner = THIS_MODULE, + }, + .probe = rx8581_probe, + .remove = __devexit_p(rx8581_remove), + .id_table = rx8581_id, +}; + +static int __init rx8581_init(void) +{ + return i2c_add_driver(&rx8581_driver); +} + +static void __exit rx8581_exit(void) +{ + i2c_del_driver(&rx8581_driver); +} + +MODULE_AUTHOR("Martyn Welch "); +MODULE_DESCRIPTION("Epson RX-8581 RTC driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_init(rx8581_init); +module_exit(rx8581_exit); -- cgit v1.2.3 From 06de18085122b873012cb23f043e2bdcf5f50923 Mon Sep 17 00:00:00 2001 From: Mark Jackson Date: Wed, 12 Nov 2008 13:27:07 -0800 Subject: rtc: add Dallas DS1390/93/94 RTC chips Add support for the Dallas DS1390/93/94 SPI RTC chip. Signed-off-by: Mark Jackson Acked-by: Alessandro Zummo Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/Kconfig | 11 +++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-ds1390.c | 220 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 232 insertions(+) create mode 100644 drivers/rtc/rtc-ds1390.c (limited to 'drivers/rtc') diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 990020c1dae9..123092d8a984 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -310,6 +310,17 @@ config RTC_DRV_DS1305 This driver can also be built as a module. If so, the module will be called rtc-ds1305. +config RTC_DRV_DS1390 + tristate "Dallas/Maxim DS1390/93/94" + help + If you say yes here you get support for the DS1390/93/94 chips. + + This driver only supports the RTC feature, and not other chip + features such as alarms and trickle charging. + + This driver can also be built as a module. If so, the module + will be called rtc-ds1390. + config RTC_DRV_MAX6902 tristate "Maxim MAX6902" help diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 16368600643c..6e79c912bf9e 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_RTC_DRV_DS1302) += rtc-ds1302.o obj-$(CONFIG_RTC_DRV_DS1305) += rtc-ds1305.o obj-$(CONFIG_RTC_DRV_DS1307) += rtc-ds1307.o obj-$(CONFIG_RTC_DRV_DS1374) += rtc-ds1374.o +obj-$(CONFIG_RTC_DRV_DS1390) += rtc-ds1390.o obj-$(CONFIG_RTC_DRV_DS1511) += rtc-ds1511.o obj-$(CONFIG_RTC_DRV_DS1553) += rtc-ds1553.o obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o diff --git a/drivers/rtc/rtc-ds1390.c b/drivers/rtc/rtc-ds1390.c new file mode 100644 index 000000000000..599e976bf014 --- /dev/null +++ b/drivers/rtc/rtc-ds1390.c @@ -0,0 +1,220 @@ +/* + * rtc-ds1390.c -- driver for DS1390/93/94 + * + * Copyright (C) 2008 Mercury IMC Ltd + * Written by Mark Jackson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * NOTE : Currently this driver only supports the bare minimum for read + * and write the RTC. The extra features provided by the chip family + * (alarms, trickle charger, different control registers) are unavailable. + */ + +#include +#include +#include +#include + +#define DS1390_REG_100THS 0x00 +#define DS1390_REG_SECONDS 0x01 +#define DS1390_REG_MINUTES 0x02 +#define DS1390_REG_HOURS 0x03 +#define DS1390_REG_DAY 0x04 +#define DS1390_REG_DATE 0x05 +#define DS1390_REG_MONTH_CENT 0x06 +#define DS1390_REG_YEAR 0x07 + +#define DS1390_REG_ALARM_100THS 0x08 +#define DS1390_REG_ALARM_SECONDS 0x09 +#define DS1390_REG_ALARM_MINUTES 0x0A +#define DS1390_REG_ALARM_HOURS 0x0B +#define DS1390_REG_ALARM_DAY_DATE 0x0C + +#define DS1390_REG_CONTROL 0x0D +#define DS1390_REG_STATUS 0x0E +#define DS1390_REG_TRICKLE 0x0F + +struct ds1390 { + struct rtc_device *rtc; + u8 txrx_buf[9]; /* cmd + 8 registers */ +}; + +static void ds1390_set_reg(struct device *dev, unsigned char address, + unsigned char data) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + + /* Set MSB to indicate write */ + chip->txrx_buf[0] = address | 0x80; + chip->txrx_buf[1] = data; + + /* do the i/o */ + spi_write_then_read(spi, chip->txrx_buf, 2, NULL, 0); +} + +static int ds1390_get_reg(struct device *dev, unsigned char address, + unsigned char *data) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + int status; + + if (!data) + return -EINVAL; + + /* Clear MSB to indicate read */ + chip->txrx_buf[0] = address & 0x7f; + /* do the i/o */ + status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 1); + if (status != 0) + return status; + + *data = chip->txrx_buf[1]; + + return 0; +} + +static int ds1390_get_datetime(struct device *dev, struct rtc_time *dt) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + int status; + + /* build the message */ + chip->txrx_buf[0] = DS1390_REG_SECONDS; + + /* do the i/o */ + status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 8); + if (status != 0) + return status; + + /* The chip sends data in this order: + * Seconds, Minutes, Hours, Day, Date, Month / Century, Year */ + dt->tm_sec = bcd2bin(chip->txrx_buf[0]); + dt->tm_min = bcd2bin(chip->txrx_buf[1]); + dt->tm_hour = bcd2bin(chip->txrx_buf[2]); + dt->tm_wday = bcd2bin(chip->txrx_buf[3]); + dt->tm_mday = bcd2bin(chip->txrx_buf[4]); + /* mask off century bit */ + dt->tm_mon = bcd2bin(chip->txrx_buf[5] & 0x7f) - 1; + /* adjust for century bit */ + dt->tm_year = bcd2bin(chip->txrx_buf[6]) + ((chip->txrx_buf[5] & 0x80) ? 100 : 0); + + return rtc_valid_tm(dt); +} + +static int ds1390_set_datetime(struct device *dev, struct rtc_time *dt) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + + /* build the message */ + chip->txrx_buf[0] = DS1390_REG_SECONDS | 0x80; + chip->txrx_buf[1] = bin2bcd(dt->tm_sec); + chip->txrx_buf[2] = bin2bcd(dt->tm_min); + chip->txrx_buf[3] = bin2bcd(dt->tm_hour); + chip->txrx_buf[4] = bin2bcd(dt->tm_wday); + chip->txrx_buf[5] = bin2bcd(dt->tm_mday); + chip->txrx_buf[6] = bin2bcd(dt->tm_mon + 1) | + ((dt->tm_year > 99) ? 0x80 : 0x00); + chip->txrx_buf[7] = bin2bcd(dt->tm_year % 100); + + /* do the i/o */ + return spi_write_then_read(spi, chip->txrx_buf, 8, NULL, 0); +} + +static int ds1390_read_time(struct device *dev, struct rtc_time *tm) +{ + return ds1390_get_datetime(dev, tm); +} + +static int ds1390_set_time(struct device *dev, struct rtc_time *tm) +{ + return ds1390_set_datetime(dev, tm); +} + +static const struct rtc_class_ops ds1390_rtc_ops = { + .read_time = ds1390_read_time, + .set_time = ds1390_set_time, +}; + +static int __devinit ds1390_probe(struct spi_device *spi) +{ + struct rtc_device *rtc; + unsigned char tmp; + struct ds1390 *chip; + int res; + + printk(KERN_DEBUG "DS1390 SPI RTC driver\n"); + + rtc = rtc_device_register("ds1390", + &spi->dev, &ds1390_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) { + printk(KERN_ALERT "RTC : unable to register device\n"); + return PTR_ERR(rtc); + } + + spi->mode = SPI_MODE_3; + spi->bits_per_word = 8; + spi_setup(spi); + + chip = kzalloc(sizeof *chip, GFP_KERNEL); + if (!chip) { + printk(KERN_ALERT "RTC : unable to allocate device memory\n"); + rtc_device_unregister(rtc); + return -ENOMEM; + } + chip->rtc = rtc; + dev_set_drvdata(&spi->dev, chip); + + res = ds1390_get_reg(&spi->dev, DS1390_REG_SECONDS, &tmp); + if (res) { + printk(KERN_ALERT "RTC : unable to read device\n"); + rtc_device_unregister(rtc); + return res; + } + + return 0; +} + +static int __devexit ds1390_remove(struct spi_device *spi) +{ + struct ds1390 *chip = platform_get_drvdata(spi); + struct rtc_device *rtc = chip->rtc; + + if (rtc) + rtc_device_unregister(rtc); + + kfree(chip); + + return 0; +} + +static struct spi_driver ds1390_driver = { + .driver = { + .name = "rtc-ds1390", + .owner = THIS_MODULE, + }, + .probe = ds1390_probe, + .remove = __devexit_p(ds1390_remove), +}; + +static __init int ds1390_init(void) +{ + return spi_register_driver(&ds1390_driver); +} +module_init(ds1390_init); + +static __exit void ds1390_exit(void) +{ + spi_unregister_driver(&ds1390_driver); +} +module_exit(ds1390_exit); + +MODULE_DESCRIPTION("DS1390/93/94 SPI RTC driver"); +MODULE_AUTHOR("Mark Jackson "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From cecf61bdee426a3e0a014f7e26990d09c71ed458 Mon Sep 17 00:00:00 2001 From: Alessandro Zummo Date: Fri, 14 Nov 2008 16:37:54 -0800 Subject: rtc: rtc-sun4v fixes, revised - simplified code - use platform_driver_probe - removed locking: it's provided by rtc subsystem Signed-off-by: Alessandro Zummo Signed-off-by: David S. Miller --- drivers/rtc/rtc-sun4v.c | 69 ++++++++++++++----------------------------------- 1 file changed, 19 insertions(+), 50 deletions(-) (limited to 'drivers/rtc') diff --git a/drivers/rtc/rtc-sun4v.c b/drivers/rtc/rtc-sun4v.c index 2012ccbb4a53..5b2261052a65 100644 --- a/drivers/rtc/rtc-sun4v.c +++ b/drivers/rtc/rtc-sun4v.c @@ -1,4 +1,4 @@ -/* rtc-sun4c.c: Hypervisor based RTC for SUN4V systems. +/* rtc-sun4v.c: Hypervisor based RTC for SUN4V systems. * * Copyright (C) 2008 David S. Miller */ @@ -7,21 +7,11 @@ #include #include #include -#include #include #include #include -MODULE_AUTHOR("David S. Miller "); -MODULE_DESCRIPTION("SUN4V RTC driver"); -MODULE_LICENSE("GPL"); - -struct sun4v_rtc { - struct rtc_device *rtc; - spinlock_t lock; -}; - static unsigned long hypervisor_get_time(void) { unsigned long ret, time; @@ -45,15 +35,7 @@ retry: static int sun4v_read_time(struct device *dev, struct rtc_time *tm) { - struct sun4v_rtc *p = dev_get_drvdata(dev); - unsigned long flags, secs; - - spin_lock_irqsave(&p->lock, flags); - secs = hypervisor_get_time(); - spin_unlock_irqrestore(&p->lock, flags); - - rtc_time_to_tm(secs, tm); - + rtc_time_to_tm(hypervisor_get_time(), tm); return 0; } @@ -80,19 +62,14 @@ retry: static int sun4v_set_time(struct device *dev, struct rtc_time *tm) { - struct sun4v_rtc *p = dev_get_drvdata(dev); - unsigned long flags, secs; + unsigned long secs; int err; err = rtc_tm_to_time(tm, &secs); if (err) return err; - spin_lock_irqsave(&p->lock, flags); - err = hypervisor_set_time(secs); - spin_unlock_irqrestore(&p->lock, flags); - - return err; + return hypervisor_set_time(secs); } static const struct rtc_class_ops sun4v_rtc_ops = { @@ -100,33 +77,22 @@ static const struct rtc_class_ops sun4v_rtc_ops = { .set_time = sun4v_set_time, }; -static int __devinit sun4v_rtc_probe(struct platform_device *pdev) +static int __init sun4v_rtc_probe(struct platform_device *pdev) { - struct sun4v_rtc *p = kzalloc(sizeof(*p), GFP_KERNEL); - - if (!p) - return -ENOMEM; - - spin_lock_init(&p->lock); - - p->rtc = rtc_device_register("sun4v", &pdev->dev, + struct rtc_device *rtc = rtc_device_register("sun4v", &pdev->dev, &sun4v_rtc_ops, THIS_MODULE); - if (IS_ERR(p->rtc)) { - int err = PTR_ERR(p->rtc); - kfree(p); - return err; - } - platform_set_drvdata(pdev, p); + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + platform_set_drvdata(pdev, rtc); return 0; } -static int __devexit sun4v_rtc_remove(struct platform_device *pdev) +static int __exit sun4v_rtc_remove(struct platform_device *pdev) { - struct sun4v_rtc *p = platform_get_drvdata(pdev); - - rtc_device_unregister(p->rtc); - kfree(p); + struct rtc_device *rtc = platform_get_drvdata(pdev); + rtc_device_unregister(rtc); return 0; } @@ -135,13 +101,12 @@ static struct platform_driver sun4v_rtc_driver = { .name = "rtc-sun4v", .owner = THIS_MODULE, }, - .probe = sun4v_rtc_probe, - .remove = __devexit_p(sun4v_rtc_remove), + .remove = __exit_p(sun4v_rtc_remove), }; static int __init sun4v_rtc_init(void) { - return platform_driver_register(&sun4v_rtc_driver); + return platform_driver_probe(&sun4v_rtc_driver, sun4v_rtc_probe); } static void __exit sun4v_rtc_exit(void) @@ -151,3 +116,7 @@ static void __exit sun4v_rtc_exit(void) module_init(sun4v_rtc_init); module_exit(sun4v_rtc_exit); + +MODULE_AUTHOR("David S. Miller "); +MODULE_DESCRIPTION("SUN4V RTC driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3