From 00dd4998a60599d98b4d6635820a1fbeafa5b021 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sun, 23 Jan 2011 09:44:12 -0600 Subject: libsas: convert to libata new error handler The conversion is quite complex given that the libata new error handler has to be hooked into the current libsas timeout and error handling. The way this is done is to process all the failed commands via libsas first, but if they have no underlying sas task (and they're on a sata device) assume they are destined for the libata error handler and send them accordingly. Finally, activate the port recovery of the libata error handler for each port known to the host. This is somewhat suboptimal, since that port may not need recovering, but given the current architecture of the libata error handler, it's the only way; and the spurious activation is harmless. Signed-off-by: James Bottomley Signed-off-by: Jeff Garzik --- drivers/scsi/libsas/sas_ata.c | 87 ++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 81 insertions(+), 6 deletions(-) (limited to 'drivers/scsi/libsas/sas_ata.c') diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index e1a395b438ee..8f56d5fbf6ec 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -238,37 +238,43 @@ static bool sas_ata_qc_fill_rtf(struct ata_queued_cmd *qc) return true; } -static void sas_ata_phy_reset(struct ata_port *ap) +static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, + unsigned long deadline) { + struct ata_port *ap = link->ap; struct domain_device *dev = ap->private_data; struct sas_internal *i = to_sas_internal(dev->port->ha->core.shost->transportt); int res = TMF_RESP_FUNC_FAILED; + int ret = 0; if (i->dft->lldd_I_T_nexus_reset) res = i->dft->lldd_I_T_nexus_reset(dev); - if (res != TMF_RESP_FUNC_COMPLETE) + if (res != TMF_RESP_FUNC_COMPLETE) { SAS_DPRINTK("%s: Unable to reset I T nexus?\n", __func__); + ret = -EAGAIN; + } switch (dev->sata_dev.command_set) { case ATA_COMMAND_SET: SAS_DPRINTK("%s: Found ATA device.\n", __func__); - ap->link.device[0].class = ATA_DEV_ATA; + *class = ATA_DEV_ATA; break; case ATAPI_COMMAND_SET: SAS_DPRINTK("%s: Found ATAPI device.\n", __func__); - ap->link.device[0].class = ATA_DEV_ATAPI; + *class = ATA_DEV_ATAPI; break; default: SAS_DPRINTK("%s: Unknown SATA command set: %d.\n", __func__, dev->sata_dev.command_set); - ap->link.device[0].class = ATA_DEV_UNKNOWN; + *class = ATA_DEV_UNKNOWN; break; } ap->cbl = ATA_CBL_SATA; + return ret; } static void sas_ata_post_internal(struct ata_queued_cmd *qc) @@ -349,7 +355,11 @@ static int sas_ata_scr_read(struct ata_link *link, unsigned int sc_reg_in, } static struct ata_port_operations sas_sata_ops = { - .phy_reset = sas_ata_phy_reset, + .prereset = ata_std_prereset, + .softreset = NULL, + .hardreset = sas_ata_hard_reset, + .postreset = ata_std_postreset, + .error_handler = ata_std_error_handler, .post_internal_cmd = sas_ata_post_internal, .qc_defer = ata_std_qc_defer, .qc_prep = ata_noop_qc_prep, @@ -781,3 +791,68 @@ int sas_discover_sata(struct domain_device *dev) return res; } + +void sas_ata_strategy_handler(struct Scsi_Host *shost) +{ + struct scsi_device *sdev; + + shost_for_each_device(sdev, shost) { + struct domain_device *ddev = sdev_to_domain_dev(sdev); + struct ata_port *ap = ddev->sata_dev.ap; + + if (!dev_is_sata(ddev)) + continue; + + ata_port_printk(ap, KERN_DEBUG, "sas eh calling libata port error handler"); + ata_scsi_port_error_handler(shost, ap); + } +} + +int sas_ata_timed_out(struct scsi_cmnd *cmd, struct sas_task *task, + enum blk_eh_timer_return *rtn) +{ + struct domain_device *ddev = cmd_to_domain_dev(cmd); + + if (!dev_is_sata(ddev) || task) + return 0; + + /* we're a sata device with no task, so this must be a libata + * eh timeout. Ideally should hook into libata timeout + * handling, but there's no point, it just wants to activate + * the eh thread */ + *rtn = BLK_EH_NOT_HANDLED; + return 1; +} + +int sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, + struct list_head *done_q) +{ + int rtn = 0; + struct scsi_cmnd *cmd, *n; + struct ata_port *ap; + + do { + LIST_HEAD(sata_q); + + ap = NULL; + + list_for_each_entry_safe(cmd, n, work_q, eh_entry) { + struct domain_device *ddev = cmd_to_domain_dev(cmd); + + if (!dev_is_sata(ddev) || TO_SAS_TASK(cmd)) + continue; + if(ap && ap != ddev->sata_dev.ap) + continue; + ap = ddev->sata_dev.ap; + rtn = 1; + list_move(&cmd->eh_entry, &sata_q); + } + + if (!list_empty(&sata_q)) { + ata_port_printk(ap, KERN_DEBUG,"sas eh calling libata cmd error handler\n"); + ata_scsi_cmd_error_handler(shost, ap, &sata_q); + } + } while (ap); + + return rtn; +} -- cgit v1.2.3 From 0f2e0330a85d351b0300583da1e335690c86bdd7 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 21 Jan 2011 20:32:01 +0300 Subject: ipr/sas_ata: use mode mask macros from Commit 14bdef982caeda19afe34010482867c18217c641 ([libata] convert drivers to use ata.h mode mask defines) didn't convert these two libata driver outside drivers/ata/... Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/scsi/libsas/sas_ata.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/scsi/libsas/sas_ata.c') diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 8f56d5fbf6ec..fc6bdc51a047 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -374,8 +374,8 @@ static struct ata_port_operations sas_sata_ops = { static struct ata_port_info sata_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ, - .pio_mask = 0x1f, /* PIO0-4 */ - .mwdma_mask = 0x07, /* MWDMA0-2 */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &sas_sata_ops }; -- cgit v1.2.3 From c10f97b9d8df818e51e6073be1b96454630595c1 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 4 Feb 2011 22:03:34 +0300 Subject: libata: remove ATA_FLAG_{SRST|SATA_RESET} These flags are marked as obsolete and the checks for them have been removed by commit 294440887b32c58d220fb54b73b7a58079b78f20 (libata-sff: kill unused ata_bus_reset()), so I think it's time to finally get rid of them... Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/scsi/libsas/sas_ata.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/scsi/libsas/sas_ata.c') diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index fc6bdc51a047..996dbda47141 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -372,8 +372,8 @@ static struct ata_port_operations sas_sata_ops = { }; static struct ata_port_info sata_port_info = { - .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | - ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ, + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | + ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, -- cgit v1.2.3 From 3696df309971b3427cb9cb039138a1732a865a0b Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 4 Feb 2011 22:04:17 +0300 Subject: libata: remove ATA_FLAG_MMIO Commit 0d5ff566779f894ca9937231a181eb31e4adff0e (libata: convert to iomap) removed all checks of ATA_FLAG_MMIO but neglected to remove the flag itself. Do it now, at last... Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/scsi/libsas/sas_ata.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/scsi/libsas/sas_ata.c') diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 996dbda47141..7538b6ffb3fe 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -372,8 +372,8 @@ static struct ata_port_operations sas_sata_ops = { }; static struct ata_port_info sata_port_info = { - .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | - ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ, + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_PIO_DMA | + ATA_FLAG_NCQ, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, -- cgit v1.2.3 From 9cbe056f6c467e7395d5aec39aceec47812eb98e Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 4 Feb 2011 22:05:48 +0300 Subject: libata: remove ATA_FLAG_NO_LEGACY All checks of ATA_FLAG_NO_LEGACY have been removed by the commits c791c30670ea61f19eec390124128bf278e854fe ([libata] minor PCI IDE probe fixes and cleanups) and f0d36efdc624beb3d9e29b9ab9e9537bf0f25d5b (libata: update libata core layer to use devres), so I think it's time to finally get rid of this flag... Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/scsi/libsas/sas_ata.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/scsi/libsas/sas_ata.c') diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 7538b6ffb3fe..4d3b704ede1c 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -372,8 +372,7 @@ static struct ata_port_operations sas_sata_ops = { }; static struct ata_port_info sata_port_info = { - .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_PIO_DMA | - ATA_FLAG_NCQ, + .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, -- cgit v1.2.3