From 1c0fd82f9375b41f880dc9d7fe32920f33dc945b Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 8 Feb 2008 04:21:03 -0800 Subject: atmel_serial: use existing console options only if BRG is running If BRGR is zero, the baud rate generator isn't running, so the boot loader can't have initialized the port. Signed-off-by: Haavard Skinnemoen Acked-by: Andrew Victor Tested-by: Marc Pignat Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/atmel_serial.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 4d1ccc2b762d..0b7b2743b996 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -834,13 +834,13 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud, { unsigned int mr, quot; -// TODO: CR is a write-only register -// unsigned int cr; -// -// cr = UART_GET_CR(port) & (ATMEL_US_RXEN | ATMEL_US_TXEN); -// if (cr == (ATMEL_US_RXEN | ATMEL_US_TXEN)) { -// /* ok, the port was enabled */ -// } + /* + * If the baud rate generator isn't running, the port wasn't + * initialized by the boot loader. + */ + quot = UART_GET_BRGR(port); + if (!quot) + return; mr = UART_GET_MR(port) & ATMEL_US_CHRL; if (mr == ATMEL_US_CHRL_8) @@ -860,7 +860,6 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud, * lower than one of those, as it would make us fall through * to a much lower baud rate than we really want. */ - quot = UART_GET_BRGR(port); *baud = port->uartclk / (16 * (quot - 1)); } -- cgit v1.2.3