From 202dc3cc10b4d37e5251431acf8d5040a8876c7d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 9 Oct 2018 19:41:58 +0200 Subject: serial: sh-sci: Fix receive on SCIFA/SCIFB variants with DMA On SCIFA and SCIFB serial ports with DMA support (i.e. some ports on R-Car Gen2 and RZ/G1 SoCs), receive DMA operations are submitted before the DMA channel pointer is initialized. Hence this fails, and the driver tries to fall back to PIO. However, at this early phase in the initialization sequence, fallback to PIO does not work, leading to a serial port that cannot receive any data. Fix this by calling sci_submit_rx() after initialization of the DMA channel pointer. Reported-by: Yoshihiro Shimoda Fixes: 2c4ee23530ffc022 ("serial: sh-sci: Postpone DMA release when falling back to PIO") Signed-off-by: Geert Uytterhoeven Reviewed-by: Wolfram Sang Tested-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sh-sci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/tty/serial/sh-sci.c') diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index ab3f6e91853d..e19bfbba8a01 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1614,10 +1614,10 @@ static void sci_request_dma(struct uart_port *port) hrtimer_init(&s->rx_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); s->rx_timer.function = rx_timer_fn; + s->chan_rx_saved = s->chan_rx = chan; + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) sci_submit_rx(s); - - s->chan_rx_saved = s->chan_rx = chan; } } -- cgit v1.2.3 From 641a41dbba217ee5bd26abe6be77f8cead9cd00e Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 30 Oct 2018 15:13:35 +0900 Subject: serial: sh-sci: Fix could not remove dev_attr_rx_fifo_timeout This patch fixes an issue that the sci_remove() could not remove dev_attr_rx_fifo_timeout because uart_remove_one_port() set the port->port.type to PORT_UNKNOWN. Reported-by: Hiromitsu Yamasaki Fixes: 5d23188a473d ("serial: sh-sci: make RX FIFO parameters tunable via sysfs") Cc: # v4.11+ Signed-off-by: Yoshihiro Shimoda Reviewed-by: Ulrich Hecht Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sh-sci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/tty/serial/sh-sci.c') diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index e19bfbba8a01..effba6ce0caa 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -3102,6 +3102,7 @@ static struct uart_driver sci_uart_driver = { static int sci_remove(struct platform_device *dev) { struct sci_port *port = platform_get_drvdata(dev); + unsigned int type = port->port.type; /* uart_remove_... clears it */ sci_ports_in_use &= ~BIT(port->port.line); uart_remove_one_port(&sci_uart_driver, &port->port); @@ -3112,8 +3113,7 @@ static int sci_remove(struct platform_device *dev) sysfs_remove_file(&dev->dev.kobj, &dev_attr_rx_fifo_trigger.attr); } - if (port->port.type == PORT_SCIFA || port->port.type == PORT_SCIFB || - port->port.type == PORT_HSCIF) { + if (type == PORT_SCIFA || type == PORT_SCIFB || type == PORT_HSCIF) { sysfs_remove_file(&dev->dev.kobj, &dev_attr_rx_fifo_timeout.attr); } -- cgit v1.2.3