From 2c7af5ba65cfb0145ad8e11f856035c10ba0d22c Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Mon, 2 Mar 2015 10:18:18 +0100 Subject: tty: serial: atmel: rework interrupt and wakeup handling The IRQ line connected to the DBGU UART is often shared with a timer device which request the IRQ with IRQF_NO_SUSPEND. Since the UART driver is correctly disabling IRQs when entering suspend we can safely request the IRQ with IRQF_COND_SUSPEND so that irq core will not complain about mixing IRQF_NO_SUSPEND and !IRQF_NO_SUSPEND. Rework the interrupt handler to wake the system up when an interrupt happens on the DEBUG_UART while the system is suspended. Signed-off-by: Boris Brezillon Reviewed-by: Alexandre Belloni Acked-by: Nicolas Ferre Acked-by: Mark Rutland Signed-off-by: Rafael J. Wysocki --- drivers/tty/serial/atmel_serial.c | 49 +++++++++++++++++++++++++++++++++++---- 1 file changed, 45 insertions(+), 4 deletions(-) (limited to 'drivers/tty/serial') diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 846552bff67d..4e959c43f680 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -47,6 +47,7 @@ #include #include #include +#include #include #include @@ -173,6 +174,12 @@ struct atmel_uart_port { bool ms_irq_enabled; bool is_usart; /* usart or uart */ struct timer_list uart_timer; /* uart timer */ + + bool suspended; + unsigned int pending; + unsigned int pending_status; + spinlock_t lock_suspended; + int (*prepare_rx)(struct uart_port *port); int (*prepare_tx)(struct uart_port *port); void (*schedule_rx)(struct uart_port *port); @@ -1179,12 +1186,15 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id) { struct uart_port *port = dev_id; struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - unsigned int status, pending, pass_counter = 0; + unsigned int status, pending, mask, pass_counter = 0; bool gpio_handled = false; + spin_lock(&atmel_port->lock_suspended); + do { status = atmel_get_lines_status(port); - pending = status & UART_GET_IMR(port); + mask = UART_GET_IMR(port); + pending = status & mask; if (!gpio_handled) { /* * Dealing with GPIO interrupt @@ -1206,11 +1216,21 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id) if (!pending) break; + if (atmel_port->suspended) { + atmel_port->pending |= pending; + atmel_port->pending_status = status; + UART_PUT_IDR(port, mask); + pm_system_wakeup(); + break; + } + atmel_handle_receive(port, pending); atmel_handle_status(port, pending, status); atmel_handle_transmit(port, pending); } while (pass_counter++ < ATMEL_ISR_PASS_LIMIT); + spin_unlock(&atmel_port->lock_suspended); + return pass_counter ? IRQ_HANDLED : IRQ_NONE; } @@ -1742,7 +1762,8 @@ static int atmel_startup(struct uart_port *port) /* * Allocate the IRQ */ - retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED, + retval = request_irq(port->irq, atmel_interrupt, + IRQF_SHARED | IRQF_COND_SUSPEND, tty ? tty->name : "atmel_serial", port); if (retval) { dev_err(port->dev, "atmel_startup - Can't get irq\n"); @@ -2513,8 +2534,14 @@ static int atmel_serial_suspend(struct platform_device *pdev, /* we can not wake up if we're running on slow clock */ atmel_port->may_wakeup = device_may_wakeup(&pdev->dev); - if (atmel_serial_clk_will_stop()) + if (atmel_serial_clk_will_stop()) { + unsigned long flags; + + spin_lock_irqsave(&atmel_port->lock_suspended, flags); + atmel_port->suspended = true; + spin_unlock_irqrestore(&atmel_port->lock_suspended, flags); device_set_wakeup_enable(&pdev->dev, 0); + } uart_suspend_port(&atmel_uart, port); @@ -2525,6 +2552,18 @@ static int atmel_serial_resume(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned long flags; + + spin_lock_irqsave(&atmel_port->lock_suspended, flags); + if (atmel_port->pending) { + atmel_handle_receive(port, atmel_port->pending); + atmel_handle_status(port, atmel_port->pending, + atmel_port->pending_status); + atmel_handle_transmit(port, atmel_port->pending); + atmel_port->pending = 0; + } + atmel_port->suspended = false; + spin_unlock_irqrestore(&atmel_port->lock_suspended, flags); uart_resume_port(&atmel_uart, port); device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup); @@ -2593,6 +2632,8 @@ static int atmel_serial_probe(struct platform_device *pdev) port->backup_imr = 0; port->uart.line = ret; + spin_lock_init(&port->lock_suspended); + ret = atmel_init_gpios(port, &pdev->dev); if (ret < 0) dev_err(&pdev->dev, "%s", -- cgit v1.2.3 From 045f32dda9477d3ddf31a4fa862c487d0f747e33 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 16 Feb 2015 08:27:49 +0200 Subject: Revert "tty/serial: of_serial: add DT alias ID handling" This reverts commit 6d01bb9dc82a60580f749062a48cb47cd5caca07. The exact same code was added in commit 3239fd31d4 (serial: of-serial: fetch line number from DT) a few lined above. Doing this once should be enough. Cc: Rob Herring Signed-off-by: Baruch Siach Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/of_serial.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/tty/serial') diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index 7ff61e24a195..33fb94f78967 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -133,10 +133,6 @@ static int of_platform_serial_setup(struct platform_device *ofdev, if (of_find_property(np, "no-loopback-test", NULL)) port->flags |= UPF_SKIP_TEST; - ret = of_alias_get_id(np, "serial"); - if (ret >= 0) - port->line = ret; - port->dev = &ofdev->dev; switch (type) { -- cgit v1.2.3 From ca8bb4aefb932e3da105f28cbfba36d57a931081 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Sun, 15 Feb 2015 18:32:16 +0100 Subject: serial: 8250: Revert "tty: serial: 8250_core: read only RX if there is something in the FIFO" This reverts commit 0aa525d11859c1a4d5b78fdc704148e2ae03ae13. The conditional RX-FIFO read seems to cause spurious interrupts and we see just: |serial8250: too much work for irq29 The previous behaviour was "default" for decades and Marvell's 88f6282 SoC might not be the only that relies on it. Therefore the Omap fix is reverted for now. Fixes: 0aa525d11859 ("tty: serial: 8250_core: read only RX if there is something in the FIFO") Reported-By: Nicolas Schichan Debuged-By: Peter Hurley Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_core.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers/tty/serial') diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index e3b9570a1eff..deae122c9c4b 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -2138,8 +2138,8 @@ int serial8250_do_startup(struct uart_port *port) /* * Clear the interrupt registers. */ - if (serial_port_in(port, UART_LSR) & UART_LSR_DR) - serial_port_in(port, UART_RX); + serial_port_in(port, UART_LSR); + serial_port_in(port, UART_RX); serial_port_in(port, UART_IIR); serial_port_in(port, UART_MSR); @@ -2300,8 +2300,8 @@ dont_test_tx_en: * saved flags to avoid getting false values from polling * routines or the previous session. */ - if (serial_port_in(port, UART_LSR) & UART_LSR_DR) - serial_port_in(port, UART_RX); + serial_port_in(port, UART_LSR); + serial_port_in(port, UART_RX); serial_port_in(port, UART_IIR); serial_port_in(port, UART_MSR); up->lsr_saved_flags = 0; @@ -2394,8 +2394,7 @@ void serial8250_do_shutdown(struct uart_port *port) * Read data port to reset things, and then unlink from * the IRQ chain. */ - if (serial_port_in(port, UART_LSR) & UART_LSR_DR) - serial_port_in(port, UART_RX); + serial_port_in(port, UART_RX); serial8250_rpm_put(up); del_timer_sync(&up->timer); -- cgit v1.2.3 From f2e0ea861117bda073d1d7ffbd3120c07c0d5d34 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 6 Mar 2015 10:49:21 +0000 Subject: Change email address for 8250_pci I'm still receiving reports to my email address, so let's point this at the linux-serial mailing list instead. Cc: Signed-off-by: Russell King Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/tty/serial') diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index daf2c82984e9..65dd3ad442ea 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -69,7 +69,7 @@ static void moan_device(const char *str, struct pci_dev *dev) "Please send the output of lspci -vv, this\n" "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" "manufacturer and name of serial board or\n" - "modem board to rmk+serial@arm.linux.org.uk.\n", + "modem board to .\n", pci_name(dev), str, dev->vendor, dev->device, dev->subsystem_vendor, dev->subsystem_device); } -- cgit v1.2.3 From 6262a3692b921a82075695c5c6d10f4a6bcc5fac Mon Sep 17 00:00:00 2001 From: Wang YanQing Date: Sat, 7 Mar 2015 01:13:03 +0800 Subject: serial:8250:8250_pci: fix redundant entry report for WCH_CH352_2S Commit 8b5c913f7ee6464849570bacb6bcd9ef0eaf7dce ("serial: 8250_pci: Add WCH CH352 quirk to avoid Xscale detection") trigger one redundant entry report message. This patch fix it. Reported-by: Russell King Signed-off-by: Wang YanQing Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/tty/serial') diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 65dd3ad442ea..285b875fd187 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -5415,10 +5415,6 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_2_115200 }, - { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH352_2S, - PCI_ANY_ID, PCI_ANY_ID, - 0, 0, pbn_b0_bt_2_115200 }, - { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_wch384_4 }, -- cgit v1.2.3 From 7cf91108d44dbef3d48766fd0e7f7347c2e48bda Mon Sep 17 00:00:00 2001 From: Wang YanQing Date: Sat, 7 Mar 2015 01:08:35 +0800 Subject: serial:8250:8250_pci: delete unneeded quirk entries These quirk entries have the same effect as default quirk entry, so we can just delete them. Signed-off-by: Wang YanQing Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 14 -------------- 1 file changed, 14 deletions(-) (limited to 'drivers/tty/serial') diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 285b875fd187..892eb32cdef4 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1987,13 +1987,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = byt_serial_setup, }, - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_QRK_UART, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = pci_default_setup, - }, { .vendor = PCI_VENDOR_ID_INTEL, .device = PCI_DEVICE_ID_INTEL_BSW_UART1, @@ -2199,13 +2192,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { /* * PLX */ - { - .vendor = PCI_VENDOR_ID_PLX, - .device = PCI_DEVICE_ID_PLX_9030, - .subvendor = PCI_SUBVENDOR_ID_PERLE, - .subdevice = PCI_ANY_ID, - .setup = pci_default_setup, - }, { .vendor = PCI_VENDOR_ID_PLX, .device = PCI_DEVICE_ID_PLX_9050, -- cgit v1.2.3 From dfd37668ea6d5029fb5d8a66ea5e202d0655fad7 Mon Sep 17 00:00:00 2001 From: Desmond Liu Date: Thu, 26 Feb 2015 16:35:57 -0800 Subject: serial: 8250_dw: Fix get_mctrl behaviour Fixed behaviour of get_mctrl() serial driver function as documented in: https://www.kernel.org/doc/Documentation/serial/driver Added device-tree properties 'dcd-override', 'dsr-override', 'cts-override', and 'ri-override' specific to the Synopsis 8250 DesignWare UART driver. Allows one to force Data Carrier Detect, Clear To Send, and Data Set Ready signals to permanently be reported as active. The Ring indicator can be forced to be reported as inactive. It is possible that if modem control signalling is enabled on a port that doesn't have these pins (e.g. - a simple two wire Tx/Rx port), the driver can hang indefinitely waiting for the state to change. The new DT properties allow the driver to ignore the state of these pins on serial ports that don't support them, as recommended in the kernel documentation. Reviewed-by: JD (Jiandong) Zheng Signed-off-by: Jonathan Richardson Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_dw.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'drivers/tty/serial') diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index e60116235836..2ab229ddee38 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -59,6 +59,8 @@ struct dw8250_data { u8 usr_reg; int last_mcr; int line; + int msr_mask_on; + int msr_mask_off; struct clk *clk; struct clk *pclk; struct reset_control *rst; @@ -81,6 +83,12 @@ static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value) value &= ~UART_MSR_DCTS; } + /* Override any modem control signals if needed */ + if (offset == UART_MSR) { + value |= d->msr_mask_on; + value &= ~d->msr_mask_off; + } + return value; } @@ -334,6 +342,30 @@ static int dw8250_probe_of(struct uart_port *p, if (id >= 0) p->line = id; + if (of_property_read_bool(np, "dcd-override")) { + /* Always report DCD as active */ + data->msr_mask_on |= UART_MSR_DCD; + data->msr_mask_off |= UART_MSR_DDCD; + } + + if (of_property_read_bool(np, "dsr-override")) { + /* Always report DSR as active */ + data->msr_mask_on |= UART_MSR_DSR; + data->msr_mask_off |= UART_MSR_DDSR; + } + + if (of_property_read_bool(np, "cts-override")) { + /* Always report DSR as active */ + data->msr_mask_on |= UART_MSR_DSR; + data->msr_mask_off |= UART_MSR_DDSR; + } + + if (of_property_read_bool(np, "ri-override")) { + /* Always report Ring indicator as inactive */ + data->msr_mask_off |= UART_MSR_RI; + data->msr_mask_off |= UART_MSR_TERI; + } + /* clock got configured through clk api, all done */ if (p->uartclk) return 0; -- cgit v1.2.3 From c4e6dcfa00dab9b10e75bba835393b81f256310b Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 16 Feb 2015 22:39:04 +0800 Subject: serial: sprd: Fix missing spin_unlock in sprd_handle_irq() Fix return from sprd_handle_irq() with spin_lock held. Signed-off-by: Axel Lin Reviewed-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sprd_serial.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/tty/serial') diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c index 594b63331ef4..bca975f5093b 100644 --- a/drivers/tty/serial/sprd_serial.c +++ b/drivers/tty/serial/sprd_serial.c @@ -293,8 +293,10 @@ static irqreturn_t sprd_handle_irq(int irq, void *dev_id) ims = serial_in(port, SPRD_IMSR); - if (!ims) + if (!ims) { + spin_unlock(&port->lock); return IRQ_NONE; + } serial_out(port, SPRD_ICLR, ~0); -- cgit v1.2.3