From e3d9558082061481af96b588583e0cf220c2943c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 5 Jun 2014 14:23:04 -0700 Subject: usb: fix ->update_hub_device() vs hdev->maxchild Commit d8521afe3586 "usb: assign default peer ports for root hubs" delayed marking a hub valid (set hdev->maxchild) until it had been fully configured and to enable the publishing of valid hubs to be serialized by usb_port_peer_mutex. However, xhci_update_hub_device() in some cases depends on hdev->maxchild already being set. Do the minimal fix and move it after the setting of hdev->maxchild. Cc: Mathias Nyman Reported-by: Valdis Kletnieks Tested-by: Valdis Kletnieks Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers/usb/core/hub.c') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 879b66e13370..ec6f05cbbae3 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1526,18 +1526,6 @@ static int hub_configure(struct usb_hub *hub, dev_dbg(hub_dev, "%umA bus power budget for each child\n", hub->mA_per_port); - /* Update the HCD's internal representation of this hub before khubd - * starts getting port status changes for devices under the hub. - */ - if (hcd->driver->update_hub_device) { - ret = hcd->driver->update_hub_device(hcd, hdev, - &hub->tt, GFP_KERNEL); - if (ret < 0) { - message = "can't update HCD hub info"; - goto fail; - } - } - ret = hub_hub_status(hub, &hubstatus, &hubchange); if (ret < 0) { message = "can't get hub status"; @@ -1593,6 +1581,18 @@ static int hub_configure(struct usb_hub *hub, if (ret < 0) goto fail; + /* Update the HCD's internal representation of this hub before khubd + * starts getting port status changes for devices under the hub. + */ + if (hcd->driver->update_hub_device) { + ret = hcd->driver->update_hub_device(hcd, hdev, + &hub->tt, GFP_KERNEL); + if (ret < 0) { + message = "can't update HCD hub info"; + goto fail; + } + } + usb_hub_adjust_deviceremovable(hdev, hub->descriptor); hub_activate(hub, HUB_INIT); -- cgit v1.2.3 From b658b8f5c09d3d1db9641c9d520b36b3e4c0d744 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 17 Jun 2014 16:16:22 -0700 Subject: usb: improve "not suspended yet" message in hub_suspend() Reading through a recent bug report [1], Alan notes: "Dan, the warning message in hub_suspend() should mention that the child device isn't suspended yet." ...update the warning from: "usb usb3-port4: not suspended yet" ...to: "usb usb3-port4: device 3-4: not suspended yet" [1]: http://marc.info/?l=linux-usb&m=140290586301336&w=2 Reported-by: Alan Stern Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/usb/core/hub.c') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index ec6f05cbbae3..78c3cd20d7ae 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3458,7 +3458,8 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) struct usb_device *udev = port_dev->child; if (udev && udev->can_submit) { - dev_warn(&port_dev->dev, "not suspended yet\n"); + dev_warn(&port_dev->dev, "device %s not suspended yet\n", + dev_name(&udev->dev)); if (PMSG_IS_AUTO(msg)) return -EBUSY; } -- cgit v1.2.3 From e3d105055525d9ea9f8e9cb0db8237df3df1bb9f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 17 Jun 2014 16:16:32 -0700 Subject: usb: fix hub-port pm_runtime_enable() vs runtime pm transitions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 9262c19d14c4 "usb: disable port power control if not supported in wHubCharacteristics" gated enabling runtime pm for usb_port devices on whether the parent hub supports power control, which causes a regression. The port must still be allowed to carry out runtime pm callbacks and receive a -EAGAIN or -EBUSY result. Otherwise the usb_port device will transition to the pm error state and trigger the same for the child usb_device. Prior to the offending commit usb_hub_create_port_device() arranged for runtime pm to be disabled is dev_pm_qos_expose_flags() failed. Instead, force the default state of PM_QOS_FLAG_NO_POWER_OFF flag to be set prior to enabling runtime pm. If that policy can not be set then fail registration. Report: http://marc.info/?l=linux-usb&m=140290586301336&w=2 Fixes: 9262c19d14c4 ("usb: disable port power control if not supported in wHubCharacteristics") Reported-by: Bjørn Mork Reported-by: Alan Stern Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/usb/core/hub.c') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 78c3cd20d7ae..21b99b4b4082 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1577,6 +1577,12 @@ static int hub_configure(struct usb_hub *hub, } } hdev->maxchild = i; + for (i = 0; i < hdev->maxchild; i++) { + struct usb_port *port_dev = hub->ports[i]; + + pm_runtime_put(&port_dev->dev); + } + mutex_unlock(&usb_port_peer_mutex); if (ret < 0) goto fail; -- cgit v1.2.3