From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/usb/gadget/serial.c | 2436 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2436 insertions(+) create mode 100644 drivers/usb/gadget/serial.c (limited to 'drivers/usb/gadget/serial.c') diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c new file mode 100644 index 000000000000..2af3f785d5a1 --- /dev/null +++ b/drivers/usb/gadget/serial.c @@ -0,0 +1,2436 @@ +/* + * g_serial.c -- USB gadget serial driver + * + * Copyright 2003 (C) Al Borchers (alborchers@steinerpoint.com) + * + * This code is based in part on the Gadget Zero driver, which + * is Copyright (C) 2003 by David Brownell, all rights reserved. + * + * This code also borrows from usbserial.c, which is + * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2000 Peter Berger (pberger@brimson.com) + * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com) + * + * This software is distributed under the terms of the GNU General + * Public License ("GPL") as published by the Free Software Foundation, + * either version 2 of that License or (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "gadget_chips.h" + + +/* Wait Cond */ + +#define __wait_cond_interruptible(wq, condition, lock, flags, ret) \ +do { \ + wait_queue_t __wait; \ + init_waitqueue_entry(&__wait, current); \ + \ + add_wait_queue(&wq, &__wait); \ + for (;;) { \ + set_current_state(TASK_INTERRUPTIBLE); \ + if (condition) \ + break; \ + if (!signal_pending(current)) { \ + spin_unlock_irqrestore(lock, flags); \ + schedule(); \ + spin_lock_irqsave(lock, flags); \ + continue; \ + } \ + ret = -ERESTARTSYS; \ + break; \ + } \ + current->state = TASK_RUNNING; \ + remove_wait_queue(&wq, &__wait); \ +} while (0) + +#define wait_cond_interruptible(wq, condition, lock, flags) \ +({ \ + int __ret = 0; \ + if (!(condition)) \ + __wait_cond_interruptible(wq, condition, lock, flags, \ + __ret); \ + __ret; \ +}) + +#define __wait_cond_interruptible_timeout(wq, condition, lock, flags, \ + timeout, ret) \ +do { \ + signed long __timeout = timeout; \ + wait_queue_t __wait; \ + init_waitqueue_entry(&__wait, current); \ + \ + add_wait_queue(&wq, &__wait); \ + for (;;) { \ + set_current_state(TASK_INTERRUPTIBLE); \ + if (__timeout == 0) \ + break; \ + if (condition) \ + break; \ + if (!signal_pending(current)) { \ + spin_unlock_irqrestore(lock, flags); \ + __timeout = schedule_timeout(__timeout); \ + spin_lock_irqsave(lock, flags); \ + continue; \ + } \ + ret = -ERESTARTSYS; \ + break; \ + } \ + current->state = TASK_RUNNING; \ + remove_wait_queue(&wq, &__wait); \ +} while (0) + +#define wait_cond_interruptible_timeout(wq, condition, lock, flags, \ + timeout) \ +({ \ + int __ret = 0; \ + if (!(condition)) \ + __wait_cond_interruptible_timeout(wq, condition, lock, \ + flags, timeout, __ret); \ + __ret; \ +}) + + +/* Defines */ + +#define GS_VERSION_STR "v2.0" +#define GS_VERSION_NUM 0x0200 + +#define GS_LONG_NAME "Gadget Serial" +#define GS_SHORT_NAME "g_serial" + +#define GS_MAJOR 127 +#define GS_MINOR_START 0 + +#define GS_NUM_PORTS 16 + +#define GS_NUM_CONFIGS 1 +#define GS_NO_CONFIG_ID 0 +#define GS_BULK_CONFIG_ID 1 +#define GS_ACM_CONFIG_ID 2 + +#define GS_MAX_NUM_INTERFACES 2 +#define GS_BULK_INTERFACE_ID 0 +#define GS_CONTROL_INTERFACE_ID 0 +#define GS_DATA_INTERFACE_ID 1 + +#define GS_MAX_DESC_LEN 256 + +#define GS_DEFAULT_READ_Q_SIZE 32 +#define GS_DEFAULT_WRITE_Q_SIZE 32 + +#define GS_DEFAULT_WRITE_BUF_SIZE 8192 +#define GS_TMP_BUF_SIZE 8192 + +#define GS_CLOSE_TIMEOUT 15 + +#define GS_DEFAULT_USE_ACM 0 + +#define GS_DEFAULT_DTE_RATE 9600 +#define GS_DEFAULT_DATA_BITS 8 +#define GS_DEFAULT_PARITY USB_CDC_NO_PARITY +#define GS_DEFAULT_CHAR_FORMAT USB_CDC_1_STOP_BITS + +/* select highspeed/fullspeed, hiding highspeed if not configured */ +#ifdef CONFIG_USB_GADGET_DUALSPEED +#define GS_SPEED_SELECT(is_hs,hs,fs) ((is_hs) ? (hs) : (fs)) +#else +#define GS_SPEED_SELECT(is_hs,hs,fs) (fs) +#endif /* CONFIG_USB_GADGET_DUALSPEED */ + +/* debug settings */ +#ifdef GS_DEBUG +static int debug = 1; + +#define gs_debug(format, arg...) \ + do { if (debug) printk(KERN_DEBUG format, ## arg); } while(0) +#define gs_debug_level(level, format, arg...) \ + do { if (debug>=level) printk(KERN_DEBUG format, ## arg); } while(0) + +#else + +#define gs_debug(format, arg...) \ + do { } while(0) +#define gs_debug_level(level, format, arg...) \ + do { } while(0) + +#endif /* GS_DEBUG */ + +/* Thanks to NetChip Technologies for donating this product ID. + * + * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! + * Instead: allocate your own, using normal USB-IF procedures. + */ +#define GS_VENDOR_ID 0x0525 /* NetChip */ +#define GS_PRODUCT_ID 0xa4a6 /* Linux-USB Serial Gadget */ +#define GS_CDC_PRODUCT_ID 0xa4a7 /* ... as CDC-ACM */ + +#define GS_LOG2_NOTIFY_INTERVAL 5 /* 1 << 5 == 32 msec */ +#define GS_NOTIFY_MAXPACKET 8 + + +/* Structures */ + +struct gs_dev; + +/* circular buffer */ +struct gs_buf { + unsigned int buf_size; + char *buf_buf; + char *buf_get; + char *buf_put; +}; + +/* list of requests */ +struct gs_req_entry { + struct list_head re_entry; + struct usb_request *re_req; +}; + +/* the port structure holds info for each port, one for each minor number */ +struct gs_port { + struct gs_dev *port_dev; /* pointer to device struct */ + struct tty_struct *port_tty; /* pointer to tty struct */ + spinlock_t port_lock; + int port_num; + int port_open_count; + int port_in_use; /* open/close in progress */ + wait_queue_head_t port_write_wait;/* waiting to write */ + struct gs_buf *port_write_buf; + struct usb_cdc_line_coding port_line_coding; +}; + +/* the device structure holds info for the USB device */ +struct gs_dev { + struct usb_gadget *dev_gadget; /* gadget device pointer */ + spinlock_t dev_lock; /* lock for set/reset config */ + int dev_config; /* configuration number */ + struct usb_ep *dev_notify_ep; /* address of notify endpoint */ + struct usb_ep *dev_in_ep; /* address of in endpoint */ + struct usb_ep *dev_out_ep; /* address of out endpoint */ + struct usb_endpoint_descriptor /* desciptor of notify ep */ + *dev_notify_ep_desc; + struct usb_endpoint_descriptor /* descriptor of in endpoint */ + *dev_in_ep_desc; + struct usb_endpoint_descriptor /* descriptor of out endpoint */ + *dev_out_ep_desc; + struct usb_request *dev_ctrl_req; /* control request */ + struct list_head dev_req_list; /* list of write requests */ + int dev_sched_port; /* round robin port scheduled */ + struct gs_port *dev_port[GS_NUM_PORTS]; /* the ports */ +}; + + +/* Functions */ + +/* module */ +static int __init gs_module_init(void); +static void __exit gs_module_exit(void); + +/* tty driver */ +static int gs_open(struct tty_struct *tty, struct file *file); +static void gs_close(struct tty_struct *tty, struct file *file); +static int gs_write(struct tty_struct *tty, + const unsigned char *buf, int count); +static void gs_put_char(struct tty_struct *tty, unsigned char ch); +static void gs_flush_chars(struct tty_struct *tty); +static int gs_write_room(struct tty_struct *tty); +static int gs_chars_in_buffer(struct tty_struct *tty); +static void gs_throttle(struct tty_struct * tty); +static void gs_unthrottle(struct tty_struct * tty); +static void gs_break(struct tty_struct *tty, int break_state); +static int gs_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg); +static void gs_set_termios(struct tty_struct *tty, struct termios *old); + +static int gs_send(struct gs_dev *dev); +static int gs_send_packet(struct gs_dev *dev, char *packet, + unsigned int size); +static int gs_recv_packet(struct gs_dev *dev, char *packet, + unsigned int size); +static void gs_read_complete(struct usb_ep *ep, struct usb_request *req); +static void gs_write_complete(struct usb_ep *ep, struct usb_request *req); + +/* gadget driver */ +static int gs_bind(struct usb_gadget *gadget); +static void gs_unbind(struct usb_gadget *gadget); +static int gs_setup(struct usb_gadget *gadget, + const struct usb_ctrlrequest *ctrl); +static int gs_setup_standard(struct usb_gadget *gadget, + const struct usb_ctrlrequest *ctrl); +static int gs_setup_class(struct usb_gadget *gadget, + const struct usb_ctrlrequest *ctrl); +static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req); +static void gs_disconnect(struct usb_gadget *gadget); +static int gs_set_config(struct gs_dev *dev, unsigned config); +static void gs_reset_config(struct gs_dev *dev); +static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed, + u8 type, unsigned int index, int is_otg); + +static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len, + int kmalloc_flags); +static void gs_free_req(struct usb_ep *ep, struct usb_request *req); + +static struct gs_req_entry *gs_alloc_req_entry(struct usb_ep *ep, unsigned len, + int kmalloc_flags); +static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req); + +static int gs_alloc_ports(struct gs_dev *dev, int kmalloc_flags); +static void gs_free_ports(struct gs_dev *dev); + +/* circular buffer */ +static struct gs_buf *gs_buf_alloc(unsigned int size, int kmalloc_flags); +static void gs_buf_free(struct gs_buf *gb); +static void gs_buf_clear(struct gs_buf *gb); +static unsigned int gs_buf_data_avail(struct gs_buf *gb); +static unsigned int gs_buf_space_avail(struct gs_buf *gb); +static unsigned int gs_buf_put(struct gs_buf *gb, const char *buf, + unsigned int count); +static unsigned int gs_buf_get(struct gs_buf *gb, char *buf, + unsigned int count); + +/* external functions */ +extern int net2280_set_fifo_mode(struct usb_gadget *gadget, int mode); + + +/* Globals */ + +static struct gs_dev *gs_device; + +static const char *EP_IN_NAME; +static const char *EP_OUT_NAME; +static const char *EP_NOTIFY_NAME; + +static struct semaphore gs_open_close_sem[GS_NUM_PORTS]; + +static unsigned int read_q_size = GS_DEFAULT_READ_Q_SIZE; +static unsigned int write_q_size = GS_DEFAULT_WRITE_Q_SIZE; + +static unsigned int write_buf_size = GS_DEFAULT_WRITE_BUF_SIZE; + +static unsigned int use_acm = GS_DEFAULT_USE_ACM; + + +/* tty driver struct */ +static struct tty_operations gs_tty_ops = { + .open = gs_open, + .close = gs_close, + .write = gs_write, + .put_char = gs_put_char, + .flush_chars = gs_flush_chars, + .write_room = gs_write_room, + .ioctl = gs_ioctl, + .set_termios = gs_set_termios, + .throttle = gs_throttle, + .unthrottle = gs_unthrottle, + .break_ctl = gs_break, + .chars_in_buffer = gs_chars_in_buffer, +}; +static struct tty_driver *gs_tty_driver; + +/* gadget driver struct */ +static struct usb_gadget_driver gs_gadget_driver = { +#ifdef CONFIG_USB_GADGET_DUALSPEED + .speed = USB_SPEED_HIGH, +#else + .speed = USB_SPEED_FULL, +#endif /* CONFIG_USB_GADGET_DUALSPEED */ + .function = GS_LONG_NAME, + .bind = gs_bind, + .unbind = gs_unbind, + .setup = gs_setup, + .disconnect = gs_disconnect, + .driver = { + .name = GS_SHORT_NAME, + /* .shutdown = ... */ + /* .suspend = ... */ + /* .resume = ... */ + }, +}; + + +/* USB descriptors */ + +#define GS_MANUFACTURER_STR_ID 1 +#define GS_PRODUCT_STR_ID 2 +#define GS_SERIAL_STR_ID 3 +#define GS_BULK_CONFIG_STR_ID 4 +#define GS_ACM_CONFIG_STR_ID 5 +#define GS_CONTROL_STR_ID 6 +#define GS_DATA_STR_ID 7 + +/* static strings, in UTF-8 */ +static char manufacturer[50]; +static struct usb_string gs_strings[] = { + { GS_MANUFACTURER_STR_ID, manufacturer }, + { GS_PRODUCT_STR_ID, GS_LONG_NAME }, + { GS_SERIAL_STR_ID, "0" }, + { GS_BULK_CONFIG_STR_ID, "Gadget Serial Bulk" }, + { GS_ACM_CONFIG_STR_ID, "Gadget Serial CDC ACM" }, + { GS_CONTROL_STR_ID, "Gadget Serial Control" }, + { GS_DATA_STR_ID, "Gadget Serial Data" }, + { } /* end of list */ +}; + +static struct usb_gadget_strings gs_string_table = { + .language = 0x0409, /* en-us */ + .strings = gs_strings, +}; + +static struct usb_device_descriptor gs_device_desc = { + .bLength = USB_DT_DEVICE_SIZE, + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = __constant_cpu_to_le16(0x0200), + .bDeviceSubClass = 0, + .bDeviceProtocol = 0, + .idVendor = __constant_cpu_to_le16(GS_VENDOR_ID), + .idProduct = __constant_cpu_to_le16(GS_PRODUCT_ID), + .iManufacturer = GS_MANUFACTURER_STR_ID, + .iProduct = GS_PRODUCT_STR_ID, + .iSerialNumber = GS_SERIAL_STR_ID, + .bNumConfigurations = GS_NUM_CONFIGS, +}; + +static struct usb_otg_descriptor gs_otg_descriptor = { + .bLength = sizeof(gs_otg_descriptor), + .bDescriptorType = USB_DT_OTG, + .bmAttributes = USB_OTG_SRP, +}; + +static struct usb_config_descriptor gs_bulk_config_desc = { + .bLength = USB_DT_CONFIG_SIZE, + .bDescriptorType = USB_DT_CONFIG, + /* .wTotalLength computed dynamically */ + .bNumInterfaces = 1, + .bConfigurationValue = GS_BULK_CONFIG_ID, + .iConfiguration = GS_BULK_CONFIG_STR_ID, + .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, + .bMaxPower = 1, +}; + +static struct usb_config_descriptor gs_acm_config_desc = { + .bLength = USB_DT_CONFIG_SIZE, + .bDescriptorType = USB_DT_CONFIG, + /* .wTotalLength computed dynamically */ + .bNumInterfaces = 2, + .bConfigurationValue = GS_ACM_CONFIG_ID, + .iConfiguration = GS_ACM_CONFIG_STR_ID, + .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, + .bMaxPower = 1, +}; + +static const struct usb_interface_descriptor gs_bulk_interface_desc = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = GS_BULK_INTERFACE_ID, + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_CDC_DATA, + .bInterfaceSubClass = 0, + .bInterfaceProtocol = 0, + .iInterface = GS_DATA_STR_ID, +}; + +static const struct usb_interface_descriptor gs_control_interface_desc = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = GS_CONTROL_INTERFACE_ID, + .bNumEndpoints = 1, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM, + .bInterfaceProtocol = USB_CDC_ACM_PROTO_AT_V25TER, + .iInterface = GS_CONTROL_STR_ID, +}; + +static const struct usb_interface_descriptor gs_data_interface_desc = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = GS_DATA_INTERFACE_ID, + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_CDC_DATA, + .bInterfaceSubClass = 0, + .bInterfaceProtocol = 0, + .iInterface = GS_DATA_STR_ID, +}; + +static const struct usb_cdc_header_desc gs_header_desc = { + .bLength = sizeof(gs_header_desc), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_HEADER_TYPE, + .bcdCDC = __constant_cpu_to_le16(0x0110), +}; + +static const struct usb_cdc_call_mgmt_descriptor gs_call_mgmt_descriptor = { + .bLength = sizeof(gs_call_mgmt_descriptor), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE, + .bmCapabilities = 0, + .bDataInterface = 1, /* index of data interface */ +}; + +static struct usb_cdc_acm_descriptor gs_acm_descriptor = { + .bLength = sizeof(gs_acm_descriptor), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_ACM_TYPE, + .bmCapabilities = 0, +}; + +static const struct usb_cdc_union_desc gs_union_desc = { + .bLength = sizeof(gs_union_desc), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_UNION_TYPE, + .bMasterInterface0 = 0, /* index of control interface */ + .bSlaveInterface0 = 1, /* index of data interface */ +}; + +static struct usb_endpoint_descriptor gs_fullspeed_notify_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET), + .bInterval = 1 << GS_LOG2_NOTIFY_INTERVAL, +}; + +static struct usb_endpoint_descriptor gs_fullspeed_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static struct usb_endpoint_descriptor gs_fullspeed_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +static const struct usb_descriptor_header *gs_bulk_fullspeed_function[] = { + (struct usb_descriptor_header *) &gs_otg_descriptor, + (struct usb_descriptor_header *) &gs_bulk_interface_desc, + (struct usb_descriptor_header *) &gs_fullspeed_in_desc, + (struct usb_descriptor_header *) &gs_fullspeed_out_desc, + NULL, +}; + +static const struct usb_descriptor_header *gs_acm_fullspeed_function[] = { + (struct usb_descriptor_header *) &gs_otg_descriptor, + (struct usb_descriptor_header *) &gs_control_interface_desc, + (struct usb_descriptor_header *) &gs_header_desc, + (struct usb_descriptor_header *) &gs_call_mgmt_descriptor, + (struct usb_descriptor_header *) &gs_acm_descriptor, + (struct usb_descriptor_header *) &gs_union_desc, + (struct usb_descriptor_header *) &gs_fullspeed_notify_desc, + (struct usb_descriptor_header *) &gs_data_interface_desc, + (struct usb_descriptor_header *) &gs_fullspeed_in_desc, + (struct usb_descriptor_header *) &gs_fullspeed_out_desc, + NULL, +}; + +#ifdef CONFIG_USB_GADGET_DUALSPEED +static struct usb_endpoint_descriptor gs_highspeed_notify_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET), + .bInterval = GS_LOG2_NOTIFY_INTERVAL+4, +}; + +static struct usb_endpoint_descriptor gs_highspeed_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = __constant_cpu_to_le16(512), +}; + +static struct usb_endpoint_descriptor gs_highspeed_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = __constant_cpu_to_le16(512), +}; + +static struct usb_qualifier_descriptor gs_qualifier_desc = { + .bLength = sizeof(struct usb_qualifier_descriptor), + .bDescriptorType = USB_DT_DEVICE_QUALIFIER, + .bcdUSB = __constant_cpu_to_le16 (0x0200), + /* assumes ep0 uses the same value for both speeds ... */ + .bNumConfigurations = GS_NUM_CONFIGS, +}; + +static const struct usb_descriptor_header *gs_bulk_highspeed_function[] = { + (struct usb_descriptor_header *) &gs_otg_descriptor, + (struct usb_descriptor_header *) &gs_bulk_interface_desc, + (struct usb_descriptor_header *) &gs_highspeed_in_desc, + (struct usb_descriptor_header *) &gs_highspeed_out_desc, + NULL, +}; + +static const struct usb_descriptor_header *gs_acm_highspeed_function[] = { + (struct usb_descriptor_header *) &gs_otg_descriptor, + (struct usb_descriptor_header *) &gs_control_interface_desc, + (struct usb_descriptor_header *) &gs_header_desc, + (struct usb_descriptor_header *) &gs_call_mgmt_descriptor, + (struct usb_descriptor_header *) &gs_acm_descriptor, + (struct usb_descriptor_header *) &gs_union_desc, + (struct usb_descriptor_header *) &gs_highspeed_notify_desc, + (struct usb_descriptor_header *) &gs_data_interface_desc, + (struct usb_descriptor_header *) &gs_highspeed_in_desc, + (struct usb_descriptor_header *) &gs_highspeed_out_desc, + NULL, +}; + +#endif /* CONFIG_USB_GADGET_DUALSPEED */ + + +/* Module */ +MODULE_DESCRIPTION(GS_LONG_NAME); +MODULE_AUTHOR("Al Borchers"); +MODULE_LICENSE("GPL"); + +#ifdef GS_DEBUG +module_param(debug, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(debug, "Enable debugging, 0=off, 1=on"); +#endif + +module_param(read_q_size, uint, S_IRUGO); +MODULE_PARM_DESC(read_q_size, "Read request queue size, default=32"); + +module_param(write_q_size, uint, S_IRUGO); +MODULE_PARM_DESC(write_q_size, "Write request queue size, default=32"); + +module_param(write_buf_size, uint, S_IRUGO); +MODULE_PARM_DESC(write_buf_size, "Write buffer size, default=8192"); + +module_param(use_acm, uint, S_IRUGO); +MODULE_PARM_DESC(use_acm, "Use CDC ACM, 0=no, 1=yes, default=no"); + +module_init(gs_module_init); +module_exit(gs_module_exit); + +/* +* gs_module_init +* +* Register as a USB gadget driver and a tty driver. +*/ +static int __init gs_module_init(void) +{ + int i; + int retval; + + retval = usb_gadget_register_driver(&gs_gadget_driver); + if (retval) { + printk(KERN_ERR "gs_module_init: cannot register gadget driver, ret=%d\n", retval); + return retval; + } + + gs_tty_driver = alloc_tty_driver(GS_NUM_PORTS); + if (!gs_tty_driver) + return -ENOMEM; + gs_tty_driver->owner = THIS_MODULE; + gs_tty_driver->driver_name = GS_SHORT_NAME; + gs_tty_driver->name = "ttygs"; + gs_tty_driver->devfs_name = "usb/ttygs/"; + gs_tty_driver->major = GS_MAJOR; + gs_tty_driver->minor_start = GS_MINOR_START; + gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; + gs_tty_driver->subtype = SERIAL_TYPE_NORMAL; + gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS; + gs_tty_driver->init_termios = tty_std_termios; + gs_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + tty_set_operations(gs_tty_driver, &gs_tty_ops); + + for (i=0; i < GS_NUM_PORTS; i++) + sema_init(&gs_open_close_sem[i], 1); + + retval = tty_register_driver(gs_tty_driver); + if (retval) { + usb_gadget_unregister_driver(&gs_gadget_driver); + put_tty_driver(gs_tty_driver); + printk(KERN_ERR "gs_module_init: cannot register tty driver, ret=%d\n", retval); + return retval; + } + + printk(KERN_INFO "gs_module_init: %s %s loaded\n", GS_LONG_NAME, GS_VERSION_STR); + return 0; +} + +/* +* gs_module_exit +* +* Unregister as a tty driver and a USB gadget driver. +*/ +static void __exit gs_module_exit(void) +{ + tty_unregister_driver(gs_tty_driver); + put_tty_driver(gs_tty_driver); + usb_gadget_unregister_driver(&gs_gadget_driver); + + printk(KERN_INFO "gs_module_exit: %s %s unloaded\n", GS_LONG_NAME, GS_VERSION_STR); +} + +/* TTY Driver */ + +/* + * gs_open + */ +static int gs_open(struct tty_struct *tty, struct file *file) +{ + int port_num; + unsigned long flags; + struct gs_port *port; + struct gs_dev *dev; + struct gs_buf *buf; + struct semaphore *sem; + int ret; + + port_num = tty->index; + + gs_debug("gs_open: (%d,%p,%p)\n", port_num, tty, file); + + if (port_num < 0 || port_num >= GS_NUM_PORTS) { + printk(KERN_ERR "gs_open: (%d,%p,%p) invalid port number\n", + port_num, tty, file); + return -ENODEV; + } + + dev = gs_device; + + if (dev == NULL) { + printk(KERN_ERR "gs_open: (%d,%p,%p) NULL device pointer\n", + port_num, tty, file); + return -ENODEV; + } + + sem = &gs_open_close_sem[port_num]; + if (down_interruptible(sem)) { + printk(KERN_ERR + "gs_open: (%d,%p,%p) interrupted waiting for semaphore\n", + port_num, tty, file); + return -ERESTARTSYS; + } + + spin_lock_irqsave(&dev->dev_lock, flags); + + if (dev->dev_config == GS_NO_CONFIG_ID) { + printk(KERN_ERR + "gs_open: (%d,%p,%p) device is not connected\n", + port_num, tty, file); + ret = -ENODEV; + goto exit_unlock_dev; + } + + port = dev->dev_port[port_num]; + + if (port == NULL) { + printk(KERN_ERR "gs_open: (%d,%p,%p) NULL port pointer\n", + port_num, tty, file); + ret = -ENODEV; + goto exit_unlock_dev; + } + + spin_lock(&port->port_lock); + spin_unlock(&dev->dev_lock); + + if (port->port_dev == NULL) { + printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (1)\n", + port_num, tty, file); + ret = -EIO; + goto exit_unlock_port; + } + + if (port->port_open_count > 0) { + ++port->port_open_count; + gs_debug("gs_open: (%d,%p,%p) already open\n", + port_num, tty, file); + ret = 0; + goto exit_unlock_port; + } + + tty->driver_data = NULL; + + /* mark port as in use, we can drop port lock and sleep if necessary */ + port->port_in_use = 1; + + /* allocate write buffer on first open */ + if (port->port_write_buf == NULL) { + spin_unlock_irqrestore(&port->port_lock, flags); + buf = gs_buf_alloc(write_buf_size, GFP_KERNEL); + spin_lock_irqsave(&port->port_lock, flags); + + /* might have been disconnected while asleep, check */ + if (port->port_dev == NULL) { + printk(KERN_ERR + "gs_open: (%d,%p,%p) port disconnected (2)\n", + port_num, tty, file); + port->port_in_use = 0; + ret = -EIO; + goto exit_unlock_port; + } + + if ((port->port_write_buf=buf) == NULL) { + printk(KERN_ERR "gs_open: (%d,%p,%p) cannot allocate port write buffer\n", + port_num, tty, file); + port->port_in_use = 0; + ret = -ENOMEM; + goto exit_unlock_port; + } + + } + + /* wait for carrier detect (not implemented) */ + + /* might have been disconnected while asleep, check */ + if (port->port_dev == NULL) { + printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (3)\n", + port_num, tty, file); + port->port_in_use = 0; + ret = -EIO; + goto exit_unlock_port; + } + + tty->driver_data = port; + port->port_tty = tty; + port->port_open_count = 1; + port->port_in_use = 0; + + gs_debug("gs_open: (%d,%p,%p) completed\n", port_num, tty, file); + + ret = 0; + +exit_unlock_port: + spin_unlock_irqrestore(&port->port_lock, flags); + up(sem); + return ret; + +exit_unlock_dev: + spin_unlock_irqrestore(&dev->dev_lock, flags); + up(sem); + return ret; + +} + +/* + * gs_close + */ +static void gs_close(struct tty_struct *tty, struct file *file) +{ + unsigned long flags; + struct gs_port *port = tty->driver_data; + struct semaphore *sem; + + if (port == NULL) { + printk(KERN_ERR "gs_close: NULL port pointer\n"); + return; + } + + gs_debug("gs_close: (%d,%p,%p)\n", port->port_num, tty, file); + + sem = &gs_open_close_sem[port->port_num]; + down(sem); + + spin_lock_irqsave(&port->port_lock, flags); + + if (port->port_open_count == 0) { + printk(KERN_ERR + "gs_close: (%d,%p,%p) port is already closed\n", + port->port_num, tty, file); + goto exit; + } + + if (port->port_open_count > 1) { + --port->port_open_count; + goto exit; + } + + /* free disconnected port on final close */ + if (port->port_dev == NULL) { + kfree(port); + goto exit; + } + + /* mark port as closed but in use, we can drop port lock */ + /* and sleep if necessary */ + port->port_in_use = 1; + port->port_open_count = 0; + + /* wait for write buffer to drain, or */ + /* at most GS_CLOSE_TIMEOUT seconds */ + if (gs_buf_data_avail(port->port_write_buf) > 0) { + wait_cond_interruptible_timeout(port->port_write_wait, + port->port_dev == NULL + || gs_buf_data_avail(port->port_write_buf) == 0, + &port->port_lock, flags, GS_CLOSE_TIMEOUT * HZ); + } + + /* free disconnected port on final close */ + /* (might have happened during the above sleep) */ + if (port->port_dev == NULL) { + kfree(port); + goto exit; + } + + gs_buf_clear(port->port_write_buf); + + tty->driver_data = NULL; + port->port_tty = NULL; + port->port_in_use = 0; + + gs_debug("gs_close: (%d,%p,%p) completed\n", + port->port_num, tty, file); + +exit: + spin_unlock_irqrestore(&port->port_lock, flags); + up(sem); +} + +/* + * gs_write + */ +static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count) +{ + unsigned long flags; + struct gs_port *port = tty->driver_data; + int ret; + + if (port == NULL) { + printk(KERN_ERR "gs_write: NULL port pointer\n"); + return -EIO; + } + + gs_debug("gs_write: (%d,%p) writing %d bytes\n", port->port_num, tty, + count); + + if (count == 0) + return 0; + + spin_lock_irqsave(&port->port_lock, flags); + + if (port->port_dev == NULL) { + printk(KERN_ERR "gs_write: (%d,%p) port is not connected\n", + port->port_num, tty); + ret = -EIO; + goto exit; + } + + if (port->port_open_count == 0) { + printk(KERN_ERR "gs_write: (%d,%p) port is closed\n", + port->port_num, tty); + ret = -EBADF; + goto exit; + } + + count = gs_buf_put(port->port_write_buf, buf, count); + + spin_unlock_irqrestore(&port->port_lock, flags); + + gs_send(gs_device); + + gs_debug("gs_write: (%d,%p) wrote %d bytes\n", port->port_num, tty, + count); + + return count; + +exit: + spin_unlock_irqrestore(&port->port_lock, flags); + return ret; +} + +/* + * gs_put_char + */ +static void gs_put_char(struct tty_struct *tty, unsigned char ch) +{ + unsigned long flags; + struct gs_port *port = tty->driver_data; + + if (port == NULL) { + printk(KERN_ERR "gs_put_char: NULL port pointer\n"); + return; + } + + gs_debug("gs_put_char: (%d,%p) char=0x%x, called from %p, %p, %p\n", port->port_num, tty, ch, __builtin_return_address(0), __builtin_return_address(1), __builtin_return_address(2)); + + spin_lock_irqsave(&port->port_lock, flags); + + if (port->port_dev == NULL) { + printk(KERN_ERR "gs_put_char: (%d,%p) port is not connected\n", + port->port_num, tty); + goto exit; + } + + if (port->port_open_count == 0) { + printk(KERN_ERR "gs_put_char: (%d,%p) port is closed\n", + port->port_num, tty); + goto exit; + } + + gs_buf_put(port->port_write_buf, &ch, 1); + +exit: + spin_unlock_irqrestore(&port->port_lock, flags); +} + +/* + * gs_flush_chars + */ +static void gs_flush_chars(struct tty_struct *tty) +{ + unsigned long flags; + struct gs_port *port = tty->driver_data; + + if (port == NULL) { + printk(KERN_ERR "gs_flush_chars: NULL port pointer\n"); + return; + } + + gs_debug("gs_flush_chars: (%d,%p)\n", port->port_num, tty); + + spin_lock_irqsave(&port->port_lock, flags); + + if (port->port_dev == NULL) { + printk(KERN_ERR + "gs_flush_chars: (%d,%p) port is not connected\n", + port->port_num, tty); + goto exit; + } + + if (port->port_open_count == 0) { + printk(KERN_ERR "gs_flush_chars: (%d,%p) port is closed\n", + port->port_num, tty); + goto exit; + } + + spin_unlock_irqrestore(&port->port_lock, flags); + + gs_send(gs_device); + + return; + +exit: + spin_unlock_irqrestore(&port->port_lock, flags); +} + +/* + * gs_write_room + */ +static int gs_write_room(struct tty_struct *tty) +{ + + int room = 0; + unsigned long flags; + struct gs_port *port = tty->driver_data; + + + if (port == NULL) + return 0; + + spin_lock_irqsave(&port->port_lock, flags); + + if (port->port_dev != NULL && port->port_open_count > 0 + && port->port_write_buf != NULL) + room = gs_buf_space_avail(port->port_write_buf); + + spin_unlock_irqrestore(&port->port_lock, flags); + + gs_debug("gs_write_room: (%d,%p) room=%d\n", + port->port_num, tty, room); + + return room; +} + +/* + * gs_chars_in_buffer + */ +static int gs_chars_in_buffer(struct tty_struct *tty) +{ + int chars = 0; + unsigned long flags; + struct gs_port *port = tty->driver_data; + + if (port == NULL) + return 0; + + spin_lock_irqsave(&port->port_lock, flags); + + if (port->port_dev != NULL && port->port_open_count > 0 + && port->port_write_buf != NULL) + chars = gs_buf_data_avail(port->port_write_buf); + + spin_unlock_irqrestore(&port->port_lock, flags); + + gs_debug("gs_chars_in_buffer: (%d,%p) chars=%d\n", + port->port_num, tty, chars); + + return chars; +} + +/* + * gs_throttle + */ +static void gs_throttle(struct tty_struct *tty) +{ +} + +/* + * gs_unthrottle + */ +static void gs_unthrottle(struct tty_struct *tty) +{ +} + +/* + * gs_break + */ +static void gs_break(struct tty_struct *tty, int break_state) +{ +} + +/* + * gs_ioctl + */ +static int gs_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) +{ + struct gs_port *port = tty->driver_data; + + if (port == NULL) { + printk(KERN_ERR "gs_ioctl: NULL port pointer\n"); + return -EIO; + } + + gs_debug("gs_ioctl: (%d,%p,%p) cmd=0x%4.4x, arg=%lu\n", + port->port_num, tty, file, cmd, arg); + + /* handle ioctls */ + + /* could not handle ioctl */ + return -ENOIOCTLCMD; +} + +/* + * gs_set_termios + */ +static void gs_set_termios(struct tty_struct *tty, struct termios *old) +{ +} + +/* +* gs_send +* +* This function finds available write requests, calls +* gs_send_packet to fill these packets with data, and +* continues until either there are no more write requests +* available or no more data to send. This function is +* run whenever data arrives or write requests are available. +*/ +static int gs_send(struct gs_dev *dev) +{ + int ret,len; + unsigned long flags; + struct usb_ep *ep; + struct usb_request *req; + struct gs_req_entry *req_entry; + + if (dev == NULL) { + printk(KERN_ERR "gs_send: NULL device pointer\n"); + return -ENODEV; + } + + spin_lock_irqsave(&dev->dev_lock, flags); + + ep = dev->dev_in_ep; + + while(!list_empty(&dev->dev_req_list)) { + + req_entry = list_entry(dev->dev_req_list.next, + struct gs_req_entry, re_entry); + + req = req_entry->re_req; + + len = gs_send_packet(dev, req->buf, ep->maxpacket); + + if (len > 0) { +gs_debug_level(3, "gs_send: len=%d, 0x%2.2x 0x%2.2x 0x%2.2x ...\n", len, *((unsigned char *)req->buf), *((unsigned char *)req->buf+1), *((unsigned char *)req->buf+2)); + list_del(&req_entry->re_entry); + req->length = len; + if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) { + printk(KERN_ERR + "gs_send: cannot queue read request, ret=%d\n", + ret); + break; + } + } else { + break; + } + + } + + spin_unlock_irqrestore(&dev->dev_lock, flags); + + return 0; +} + +/* + * gs_send_packet + * + * If there is data to send, a packet is built in the given + * buffer and the size is returned. If there is no data to + * send, 0 is returned. If there is any error a negative + * error number is returned. + * + * Called during USB completion routine, on interrupt time. + * + * We assume that disconnect will not happen until all completion + * routines have completed, so we can assume that the dev_port + * array does not change during the lifetime of this function. + */ +static int gs_send_packet(struct gs_dev *dev, char *packet, unsigned int size) +{ + unsigned int len; + struct gs_port *port; + + /* TEMPORARY -- only port 0 is supported right now */ + port = dev->dev_port[0]; + + if (port == NULL) { + printk(KERN_ERR + "gs_send_packet: port=%d, NULL port pointer\n", + 0); + return -EIO; + } + + spin_lock(&port->port_lock); + + len = gs_buf_data_avail(port->port_write_buf); + if (len < size) + size = len; + + if (size == 0) + goto exit; + + size = gs_buf_get(port->port_write_buf, packet, size); + + if (port->port_tty) + wake_up_interruptible(&port->port_tty->write_wait); + +exit: + spin_unlock(&port->port_lock); + return size; +} + +/* + * gs_recv_packet + * + * Called for each USB packet received. Reads the packet + * header and stuffs the data in the appropriate tty buffer. + * Returns 0 if successful, or a negative error number. + * + * Called during USB completion routine, on interrupt time. + * + * We assume that disconnect will not happen until all completion + * routines have completed, so we can assume that the dev_port + * array does not change during the lifetime of this function. + */ +static int gs_recv_packet(struct gs_dev *dev, char *packet, unsigned int size) +{ + unsigned int len; + struct gs_port *port; + int ret; + + /* TEMPORARY -- only port 0 is supported right now */ + port = dev->dev_port[0]; + + if (port == NULL) { + printk(KERN_ERR "gs_recv_packet: port=%d, NULL port pointer\n", + port->port_num); + return -EIO; + } + + spin_lock(&port->port_lock); + + if (port->port_open_count == 0) { + printk(KERN_ERR "gs_recv_packet: port=%d, port is closed\n", + port->port_num); + ret = -EIO; + goto exit; + } + + if (port->port_tty == NULL) { + printk(KERN_ERR "gs_recv_packet: port=%d, NULL tty pointer\n", + port->port_num); + ret = -EIO; + goto exit; + } + + if (port->port_tty->magic != TTY_MAGIC) { + printk(KERN_ERR "gs_recv_packet: port=%d, bad tty magic\n", + port->port_num); + ret = -EIO; + goto exit; + } + + len = (unsigned int)(TTY_FLIPBUF_SIZE - port->port_tty->flip.count); + if (len < size) + size = len; + + if (size > 0) { + memcpy(port->port_tty->flip.char_buf_ptr, packet, size); + port->port_tty->flip.char_buf_ptr += size; + port->port_tty->flip.count += size; + tty_flip_buffer_push(port->port_tty); + wake_up_interruptible(&port->port_tty->read_wait); + } + + ret = 0; + +exit: + spin_unlock(&port->port_lock); + return ret; +} + +/* +* gs_read_complete +*/ +static void gs_read_complete(struct usb_ep *ep, struct usb_request *req) +{ + int ret; + struct gs_dev *dev = ep->driver_data; + + if (dev == NULL) { + printk(KERN_ERR "gs_read_complete: NULL device pointer\n"); + return; + } + + switch(req->status) { + case 0: + /* normal completion */ + gs_recv_packet(dev, req->buf, req->actual); +requeue: + req->length = ep->maxpacket; + if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) { + printk(KERN_ERR + "gs_read_complete: cannot queue read request, ret=%d\n", + ret); + } + break; + + case -ESHUTDOWN: + /* disconnect */ + gs_debug("gs_read_complete: shutdown\n"); + gs_free_req(ep, req); + break; + + default: + /* unexpected */ + printk(KERN_ERR + "gs_read_complete: unexpected status error, status=%d\n", + req->status); + goto requeue; + break; + } +} + +/* +* gs_write_complete +*/ +static void gs_write_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct gs_dev *dev = ep->driver_data; + struct gs_req_entry *gs_req = req->context; + + if (dev == NULL) { + printk(KERN_ERR "gs_write_complete: NULL device pointer\n"); + return; + } + + switch(req->status) { + case 0: + /* normal completion */ +requeue: + if (gs_req == NULL) { + printk(KERN_ERR + "gs_write_complete: NULL request pointer\n"); + return; + } + + spin_lock(&dev->dev_lock); + list_add(&gs_req->re_entry, &dev->dev_req_list); + spin_unlock(&dev->dev_lock); + + gs_send(dev); + + break; + + case -ESHUTDOWN: + /* disconnect */ + gs_debug("gs_write_complete: shutdown\n"); + gs_free_req(ep, req); + break; + + default: + printk(KERN_ERR + "gs_write_complete: unexpected status error, status=%d\n", + req->status); + goto requeue; + break; + } +} + +/* Gadget Driver */ + +/* + * gs_bind + * + * Called on module load. Allocates and initializes the device + * structure and a control request. + */ +static int gs_bind(struct usb_gadget *gadget) +{ + int ret; + struct usb_ep *ep; + struct gs_dev *dev; + + /* device specific */ + if (gadget_is_net2280(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0001); + } else if (gadget_is_pxa(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0002); + } else if (gadget_is_sh(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0003); + /* sh doesn't support multiple interfaces or configs */ + use_acm = 0; + } else if (gadget_is_sa1100(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0004); + /* sa1100 doesn't support necessary endpoints */ + use_acm = 0; + } else if (gadget_is_goku(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0005); + } else if (gadget_is_mq11xx(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0006); + } else if (gadget_is_omap(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0007); + } else if (gadget_is_lh7a40x(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0008); + } else if (gadget_is_n9604(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0009); + } else if (gadget_is_pxa27x(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0011); + } else if (gadget_is_s3c2410(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0012); + } else if (gadget_is_at91(gadget)) { + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0013); + } else { + printk(KERN_WARNING "gs_bind: controller '%s' not recognized\n", + gadget->name); + /* unrecognized, but safe unless bulk is REALLY quirky */ + gs_device_desc.bcdDevice = + __constant_cpu_to_le16(GS_VERSION_NUM|0x0099); + } + + usb_ep_autoconfig_reset(gadget); + + ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc); + if (!ep) + goto autoconf_fail; + EP_IN_NAME = ep->name; + ep->driver_data = ep; /* claim the endpoint */ + + ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc); + if (!ep) + goto autoconf_fail; + EP_OUT_NAME = ep->name; + ep->driver_data = ep; /* claim the endpoint */ + + if (use_acm) { + ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc); + if (!ep) { + printk(KERN_ERR "gs_bind: cannot run ACM on %s\n", gadget->name); + goto autoconf_fail; + } + gs_device_desc.idProduct = __constant_cpu_to_le16( + GS_CDC_PRODUCT_ID), + EP_NOTIFY_NAME = ep->name; + ep->driver_data = ep; /* claim the endpoint */ + } + + gs_device_desc.bDeviceClass = use_acm + ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC; + gs_device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; + +#ifdef CONFIG_USB_GADGET_DUALSPEED + gs_qualifier_desc.bDeviceClass = use_acm + ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC; + /* assume ep0 uses the same packet size for both speeds */ + gs_qualifier_desc.bMaxPacketSize0 = gs_device_desc.bMaxPacketSize0; + /* assume endpoints are dual-speed */ + gs_highspeed_notify_desc.bEndpointAddress = + gs_fullspeed_notify_desc.bEndpointAddress; + gs_highspeed_in_desc.bEndpointAddress = + gs_fullspeed_in_desc.bEndpointAddress; + gs_highspeed_out_desc.bEndpointAddress = + gs_fullspeed_out_desc.bEndpointAddress; +#endif /* CONFIG_USB_GADGET_DUALSPEED */ + + usb_gadget_set_selfpowered(gadget); + + if (gadget->is_otg) { + gs_otg_descriptor.bmAttributes |= USB_OTG_HNP, + gs_bulk_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + gs_acm_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + } + + gs_device = dev = kmalloc(sizeof(struct gs_dev), GFP_KERNEL); + if (dev == NULL) + return -ENOMEM; + + snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s", + system_utsname.sysname, system_utsname.release, + gadget->name); + + memset(dev, 0, sizeof(struct gs_dev)); + dev->dev_gadget = gadget; + spin_lock_init(&dev->dev_lock); + INIT_LIST_HEAD(&dev->dev_req_list); + set_gadget_data(gadget, dev); + + if ((ret=gs_alloc_ports(dev, GFP_KERNEL)) != 0) { + printk(KERN_ERR "gs_bind: cannot allocate ports\n"); + gs_unbind(gadget); + return ret; + } + + /* preallocate control response and buffer */ + dev->dev_ctrl_req = gs_alloc_req(gadget->ep0, GS_MAX_DESC_LEN, + GFP_KERNEL); + if (dev->dev_ctrl_req == NULL) { + gs_unbind(gadget); + return -ENOMEM; + } + dev->dev_ctrl_req->complete = gs_setup_complete; + + gadget->ep0->driver_data = dev; + + printk(KERN_INFO "gs_bind: %s %s bound\n", + GS_LONG_NAME, GS_VERSION_STR); + + return 0; + +autoconf_fail: + printk(KERN_ERR "gs_bind: cannot autoconfigure on %s\n", gadget->name); + return -ENODEV; +} + +/* + * gs_unbind + * + * Called on module unload. Frees the control request and device + * structure. + */ +static void gs_unbind(struct usb_gadget *gadget) +{ + struct gs_dev *dev = get_gadget_data(gadget); + + gs_device = NULL; + + /* read/write requests already freed, only control request remains */ + if (dev != NULL) { + if (dev->dev_ctrl_req != NULL) { + gs_free_req(gadget->ep0, dev->dev_ctrl_req); + dev->dev_ctrl_req = NULL; + } + gs_free_ports(dev); + kfree(dev); + set_gadget_data(gadget, NULL); + } + + printk(KERN_INFO "gs_unbind: %s %s unbound\n", GS_LONG_NAME, + GS_VERSION_STR); +} + +/* + * gs_setup + * + * Implements all the control endpoint functionality that's not + * handled in hardware or the hardware driver. + * + * Returns the size of the data sent to the host, or a negative + * error number. + */ +static int gs_setup(struct usb_gadget *gadget, + const struct usb_ctrlrequest *ctrl) +{ + int ret = -EOPNOTSUPP; + struct gs_dev *dev = get_gadget_data(gadget); + struct usb_request *req = dev->dev_ctrl_req; + u16 wIndex = ctrl->wIndex; + u16 wValue = ctrl->wValue; + u16 wLength = ctrl->wLength; + + switch (ctrl->bRequestType & USB_TYPE_MASK) { + case USB_TYPE_STANDARD: + ret = gs_setup_standard(gadget,ctrl); + break; + + case USB_TYPE_CLASS: + ret = gs_setup_class(gadget,ctrl); + break; + + default: + printk(KERN_ERR "gs_setup: unknown request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n", + ctrl->bRequestType, ctrl->bRequest, + wValue, wIndex, wLength); + break; + } + + /* respond with data transfer before status phase? */ + if (ret >= 0) { + req->length = ret; + req->zero = ret < wLength + && (ret % gadget->ep0->maxpacket) == 0; + ret = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); + if (ret < 0) { + printk(KERN_ERR "gs_setup: cannot queue response, ret=%d\n", + ret); + req->status = 0; + gs_setup_complete(gadget->ep0, req); + } + } + + /* device either stalls (ret < 0) or reports success */ + return ret; +} + +static int gs_setup_standard(struct usb_gadget *gadget, + const struct usb_ctrlrequest *ctrl) +{ + int ret = -EOPNOTSUPP; + struct gs_dev *dev = get_gadget_data(gadget); + struct usb_request *req = dev->dev_ctrl_req; + u16 wIndex = ctrl->wIndex; + u16 wValue = ctrl->wValue; + u16 wLength = ctrl->wLength; + + switch (ctrl->bRequest) { + case USB_REQ_GET_DESCRIPTOR: + if (ctrl->bRequestType != USB_DIR_IN) + break; + + switch (wValue >> 8) { + case USB_DT_DEVICE: + ret = min(wLength, + (u16)sizeof(struct usb_device_descriptor)); + memcpy(req->buf, &gs_device_desc, ret); + break; + +#ifdef CONFIG_USB_GADGET_DUALSPEED + case USB_DT_DEVICE_QUALIFIER: + if (!gadget->is_dualspeed) + break; + ret = min(wLength, + (u16)sizeof(struct usb_qualifier_descriptor)); + memcpy(req->buf, &gs_qualifier_desc, ret); + break; + + case USB_DT_OTHER_SPEED_CONFIG: + if (!gadget->is_dualspeed) + break; + /* fall through */ +#endif /* CONFIG_USB_GADGET_DUALSPEED */ + case USB_DT_CONFIG: + ret = gs_build_config_buf(req->buf, gadget->speed, + wValue >> 8, wValue & 0xff, + gadget->is_otg); + if (ret >= 0) + ret = min(wLength, (u16)ret); + break; + + case USB_DT_STRING: + /* wIndex == language code. */ + ret = usb_gadget_get_string(&gs_string_table, + wValue & 0xff, req->buf); + if (ret >= 0) + ret = min(wLength, (u16)ret); + break; + } + break; + + case USB_REQ_SET_CONFIGURATION: + if (ctrl->bRequestType != 0) + break; + spin_lock(&dev->dev_lock); + ret = gs_set_config(dev, wValue); + spin_unlock(&dev->dev_lock); + break; + + case USB_REQ_GET_CONFIGURATION: + if (ctrl->bRequestType != USB_DIR_IN) + break; + *(u8 *)req->buf = dev->dev_config; + ret = min(wLength, (u16)1); + break; + + case USB_REQ_SET_INTERFACE: + if (ctrl->bRequestType != USB_RECIP_INTERFACE + || !dev->dev_config + || wIndex >= GS_MAX_NUM_INTERFACES) + break; + if (dev->dev_config == GS_BULK_CONFIG_ID + && wIndex != GS_BULK_INTERFACE_ID) + break; + /* no alternate interface settings */ + if (wValue != 0) + break; + spin_lock(&dev->dev_lock); + /* PXA hardware partially handles SET_INTERFACE; + * we need to kluge around that interference. */ + if (gadget_is_pxa(gadget)) { + ret = gs_set_config(dev, use_acm ? + GS_ACM_CONFIG_ID : GS_BULK_CONFIG_ID); + goto set_interface_done; + } + if (dev->dev_config != GS_BULK_CONFIG_ID + && wIndex == GS_CONTROL_INTERFACE_ID) { + if (dev->dev_notify_ep) { + usb_ep_disable(dev->dev_notify_ep); + usb_ep_enable(dev->dev_notify_ep, dev->dev_notify_ep_desc); + } + } else { + usb_ep_disable(dev->dev_in_ep); + usb_ep_disable(dev->dev_out_ep); + usb_ep_enable(dev->dev_in_ep, dev->dev_in_ep_desc); + usb_ep_enable(dev->dev_out_ep, dev->dev_out_ep_desc); + } + ret = 0; +set_interface_done: + spin_unlock(&dev->dev_lock); + break; + + case USB_REQ_GET_INTERFACE: + if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE) + || dev->dev_config == GS_NO_CONFIG_ID) + break; + if (wIndex >= GS_MAX_NUM_INTERFACES + || (dev->dev_config == GS_BULK_CONFIG_ID + && wIndex != GS_BULK_INTERFACE_ID)) { + ret = -EDOM; + break; + } + /* no alternate interface settings */ + *(u8 *)req->buf = 0; + ret = min(wLength, (u16)1); + break; + + default: + printk(KERN_ERR "gs_setup: unknown standard request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n", + ctrl->bRequestType, ctrl->bRequest, + wValue, wIndex, wLength); + break; + } + + return ret; +} + +static int gs_setup_class(struct usb_gadget *gadget, + const struct usb_ctrlrequest *ctrl) +{ + int ret = -EOPNOTSUPP; + struct gs_dev *dev = get_gadget_data(gadget); + struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */ + struct usb_request *req = dev->dev_ctrl_req; + u16 wIndex = ctrl->wIndex; + u16 wValue = ctrl->wValue; + u16 wLength = ctrl->wLength; + + switch (ctrl->bRequest) { + case USB_CDC_REQ_SET_LINE_CODING: + ret = min(wLength, + (u16)sizeof(struct usb_cdc_line_coding)); + if (port) { + spin_lock(&port->port_lock); + memcpy(&port->port_line_coding, req->buf, ret); + spin_unlock(&port->port_lock); + } + break; + + case USB_CDC_REQ_GET_LINE_CODING: + port = dev->dev_port[0]; /* ACM only has one port */ + ret = min(wLength, + (u16)sizeof(struct usb_cdc_line_coding)); + if (port) { + spin_lock(&port->port_lock); + memcpy(req->buf, &port->port_line_coding, ret); + spin_unlock(&port->port_lock); + } + break; + + case USB_CDC_REQ_SET_CONTROL_LINE_STATE: + ret = 0; + break; + + default: + printk(KERN_ERR "gs_setup: unknown class request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n", + ctrl->bRequestType, ctrl->bRequest, + wValue, wIndex, wLength); + break; + } + + return ret; +} + +/* + * gs_setup_complete + */ +static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req) +{ + if (req->status || req->actual != req->length) { + printk(KERN_ERR "gs_setup_complete: status error, status=%d, actual=%d, length=%d\n", + req->status, req->actual, req->length); + } +} + +/* + * gs_disconnect + * + * Called when the device is disconnected. Frees the closed + * ports and disconnects open ports. Open ports will be freed + * on close. Then reallocates the ports for the next connection. + */ +static void gs_disconnect(struct usb_gadget *gadget) +{ + unsigned long flags; + struct gs_dev *dev = get_gadget_data(gadget); + + spin_lock_irqsave(&dev->dev_lock, flags); + + gs_reset_config(dev); + + /* free closed ports and disconnect open ports */ + /* (open ports will be freed when closed) */ + gs_free_ports(dev); + + /* re-allocate ports for the next connection */ + if (gs_alloc_ports(dev, GFP_ATOMIC) != 0) + printk(KERN_ERR "gs_disconnect: cannot re-allocate ports\n"); + + spin_unlock_irqrestore(&dev->dev_lock, flags); + + printk(KERN_INFO "gs_disconnect: %s disconnected\n", GS_LONG_NAME); +} + +/* + * gs_set_config + * + * Configures the device by enabling device specific + * optimizations, setting up the endpoints, allocating + * read and write requests and queuing read requests. + * + * The device lock must be held when calling this function. + */ +static int gs_set_config(struct gs_dev *dev, unsigned config) +{ + int i; + int ret = 0; + struct usb_gadget *gadget = dev->dev_gadget; + struct usb_ep *ep; + struct usb_endpoint_descriptor *ep_desc; + struct usb_request *req; + struct gs_req_entry *req_entry; + + if (dev == NULL) { + printk(KERN_ERR "gs_set_config: NULL device pointer\n"); + return 0; + } + + if (config == dev->dev_config) + return 0; + + gs_reset_config(dev); + + switch (config) { + case GS_NO_CONFIG_ID: + return 0; + case GS_BULK_CONFIG_ID: + if (use_acm) + return -EINVAL; + /* device specific optimizations */ + if (gadget_is_net2280(gadget)) + net2280_set_fifo_mode(gadget, 1); + break; + case GS_ACM_CONFIG_ID: + if (!use_acm) + return -EINVAL; + /* device specific optimizations */ + if (gadget_is_net2280(gadget)) + net2280_set_fifo_mode(gadget, 1); + break; + default: + return -EINVAL; + } + + dev->dev_config = config; + + gadget_for_each_ep(ep, gadget) { + + if (EP_NOTIFY_NAME + && strcmp(ep->name, EP_NOTIFY_NAME) == 0) { + ep_desc = GS_SPEED_SELECT( + gadget->speed == USB_SPEED_HIGH, + &gs_highspeed_notify_desc, + &gs_fullspeed_notify_desc); + ret = usb_ep_enable(ep,ep_desc); + if (ret == 0) { + ep->driver_data = dev; + dev->dev_notify_ep = ep; + dev->dev_notify_ep_desc = ep_desc; + } else { + printk(KERN_ERR "gs_set_config: cannot enable notify endpoint %s, ret=%d\n", + ep->name, ret); + goto exit_reset_config; + } + } + + else if (strcmp(ep->name, EP_IN_NAME) == 0) { + ep_desc = GS_SPEED_SELECT( + gadget->speed == USB_SPEED_HIGH, + &gs_highspeed_in_desc, + &gs_fullspeed_in_desc); + ret = usb_ep_enable(ep,ep_desc); + if (ret == 0) { + ep->driver_data = dev; + dev->dev_in_ep = ep; + dev->dev_in_ep_desc = ep_desc; + } else { + printk(KERN_ERR "gs_set_config: cannot enable in endpoint %s, ret=%d\n", + ep->name, ret); + goto exit_reset_config; + } + } + + else if (strcmp(ep->name, EP_OUT_NAME) == 0) { + ep_desc = GS_SPEED_SELECT( + gadget->speed == USB_SPEED_HIGH, + &gs_highspeed_out_desc, + &gs_fullspeed_out_desc); + ret = usb_ep_enable(ep,ep_desc); + if (ret == 0) { + ep->driver_data = dev; + dev->dev_out_ep = ep; + dev->dev_out_ep_desc = ep_desc; + } else { + printk(KERN_ERR "gs_set_config: cannot enable out endpoint %s, ret=%d\n", + ep->name, ret); + goto exit_reset_config; + } + } + + } + + if (dev->dev_in_ep == NULL || dev->dev_out_ep == NULL + || (config != GS_BULK_CONFIG_ID && dev->dev_notify_ep == NULL)) { + printk(KERN_ERR "gs_set_config: cannot find endpoints\n"); + ret = -ENODEV; + goto exit_reset_config; + } + + /* allocate and queue read requests */ + ep = dev->dev_out_ep; + for (i=0; imaxpacket, GFP_ATOMIC))) { + req->complete = gs_read_complete; + if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) { + printk(KERN_ERR "gs_set_config: cannot queue read request, ret=%d\n", + ret); + } + } else { + printk(KERN_ERR "gs_set_config: cannot allocate read requests\n"); + ret = -ENOMEM; + goto exit_reset_config; + } + } + + /* allocate write requests, and put on free list */ + ep = dev->dev_in_ep; + for (i=0; imaxpacket, GFP_ATOMIC))) { + req_entry->re_req->complete = gs_write_complete; + list_add(&req_entry->re_entry, &dev->dev_req_list); + } else { + printk(KERN_ERR "gs_set_config: cannot allocate write requests\n"); + ret = -ENOMEM; + goto exit_reset_config; + } + } + + printk(KERN_INFO "gs_set_config: %s configured, %s speed %s config\n", + GS_LONG_NAME, + gadget->speed == USB_SPEED_HIGH ? "high" : "full", + config == GS_BULK_CONFIG_ID ? "BULK" : "CDC-ACM"); + + return 0; + +exit_reset_config: + gs_reset_config(dev); + return ret; +} + +/* + * gs_reset_config + * + * Mark the device as not configured, disable all endpoints, + * which forces completion of pending I/O and frees queued + * requests, and free the remaining write requests on the + * free list. + * + * The device lock must be held when calling this function. + */ +static void gs_reset_config(struct gs_dev *dev) +{ + struct gs_req_entry *req_entry; + + if (dev == NULL) { + printk(KERN_ERR "gs_reset_config: NULL device pointer\n"); + return; + } + + if (dev->dev_config == GS_NO_CONFIG_ID) + return; + + dev->dev_config = GS_NO_CONFIG_ID; + + /* free write requests on the free list */ + while(!list_empty(&dev->dev_req_list)) { + req_entry = list_entry(dev->dev_req_list.next, + struct gs_req_entry, re_entry); + list_del(&req_entry->re_entry); + gs_free_req_entry(dev->dev_in_ep, req_entry); + } + + /* disable endpoints, forcing completion of pending i/o; */ + /* completion handlers free their requests in this case */ + if (dev->dev_notify_ep) { + usb_ep_disable(dev->dev_notify_ep); + dev->dev_notify_ep = NULL; + } + if (dev->dev_in_ep) { + usb_ep_disable(dev->dev_in_ep); + dev->dev_in_ep = NULL; + } + if (dev->dev_out_ep) { + usb_ep_disable(dev->dev_out_ep); + dev->dev_out_ep = NULL; + } +} + +/* + * gs_build_config_buf + * + * Builds the config descriptors in the given buffer and returns the + * length, or a negative error number. + */ +static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed, + u8 type, unsigned int index, int is_otg) +{ + int len; + int high_speed; + const struct usb_config_descriptor *config_desc; + const struct usb_descriptor_header **function; + + if (index >= gs_device_desc.bNumConfigurations) + return -EINVAL; + + /* other speed switches high and full speed */ + high_speed = (speed == USB_SPEED_HIGH); + if (type == USB_DT_OTHER_SPEED_CONFIG) + high_speed = !high_speed; + + if (use_acm) { + config_desc = &gs_acm_config_desc; + function = GS_SPEED_SELECT(high_speed, + gs_acm_highspeed_function, + gs_acm_fullspeed_function); + } else { + config_desc = &gs_bulk_config_desc; + function = GS_SPEED_SELECT(high_speed, + gs_bulk_highspeed_function, + gs_bulk_fullspeed_function); + } + + /* for now, don't advertise srp-only devices */ + if (!is_otg) + function++; + + len = usb_gadget_config_buf(config_desc, buf, GS_MAX_DESC_LEN, function); + if (len < 0) + return len; + + ((struct usb_config_descriptor *)buf)->bDescriptorType = type; + + return len; +} + +/* + * gs_alloc_req + * + * Allocate a usb_request and its buffer. Returns a pointer to the + * usb_request or NULL if there is an error. + */ +static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len, int kmalloc_flags) +{ + struct usb_request *req; + + if (ep == NULL) + return NULL; + + req = usb_ep_alloc_request(ep, kmalloc_flags); + + if (req != NULL) { + req->length = len; + req->buf = kmalloc(len, kmalloc_flags); + if (req->buf == NULL) { + usb_ep_free_request(ep, req); + return NULL; + } + } + + return req; +} + +/* + * gs_free_req + * + * Free a usb_request and its buffer. + */ +static void gs_free_req(struct usb_ep *ep, struct usb_request *req) +{ + if (ep != NULL && req != NULL) { + kfree(req->buf); + usb_ep_free_request(ep, req); + } +} + +/* + * gs_alloc_req_entry + * + * Allocates a request and its buffer, using the given + * endpoint, buffer len, and kmalloc flags. + */ +static struct gs_req_entry *gs_alloc_req_entry(struct usb_ep *ep, unsigned len, int kmalloc_flags) +{ + struct gs_req_entry *req; + + req = kmalloc(sizeof(struct gs_req_entry), kmalloc_flags); + if (req == NULL) + return NULL; + + req->re_req = gs_alloc_req(ep, len, kmalloc_flags); + if (req->re_req == NULL) { + kfree(req); + return NULL; + } + + req->re_req->context = req; + + return req; +} + +/* + * gs_free_req_entry + * + * Frees a request and its buffer. + */ +static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req) +{ + if (ep != NULL && req != NULL) { + if (req->re_req != NULL) + gs_free_req(ep, req->re_req); + kfree(req); + } +} + +/* + * gs_alloc_ports + * + * Allocate all ports and set the gs_dev struct to point to them. + * Return 0 if successful, or a negative error number. + * + * The device lock is normally held when calling this function. + */ +static int gs_alloc_ports(struct gs_dev *dev, int kmalloc_flags) +{ + int i; + struct gs_port *port; + + if (dev == NULL) + return -EIO; + + for (i=0; iport_dev = dev; + port->port_num = i; + port->port_line_coding.dwDTERate = cpu_to_le32(GS_DEFAULT_DTE_RATE); + port->port_line_coding.bCharFormat = GS_DEFAULT_CHAR_FORMAT; + port->port_line_coding.bParityType = GS_DEFAULT_PARITY; + port->port_line_coding.bDataBits = GS_DEFAULT_DATA_BITS; + spin_lock_init(&port->port_lock); + init_waitqueue_head(&port->port_write_wait); + + dev->dev_port[i] = port; + } + + return 0; +} + +/* + * gs_free_ports + * + * Free all closed ports. Open ports are disconnected by + * freeing their write buffers, setting their device pointers + * and the pointers to them in the device to NULL. These + * ports will be freed when closed. + * + * The device lock is normally held when calling this function. + */ +static void gs_free_ports(struct gs_dev *dev) +{ + int i; + unsigned long flags; + struct gs_port *port; + + if (dev == NULL) + return; + + for (i=0; idev_port[i]) != NULL) { + dev->dev_port[i] = NULL; + + spin_lock_irqsave(&port->port_lock, flags); + + if (port->port_write_buf != NULL) { + gs_buf_free(port->port_write_buf); + port->port_write_buf = NULL; + } + + if (port->port_open_count > 0 || port->port_in_use) { + port->port_dev = NULL; + wake_up_interruptible(&port->port_write_wait); + if (port->port_tty) { + wake_up_interruptible(&port->port_tty->read_wait); + wake_up_interruptible(&port->port_tty->write_wait); + } + spin_unlock_irqrestore(&port->port_lock, flags); + } else { + spin_unlock_irqrestore(&port->port_lock, flags); + kfree(port); + } + + } + } +} + +/* Circular Buffer */ + +/* + * gs_buf_alloc + * + * Allocate a circular buffer and all associated memory. + */ +static struct gs_buf *gs_buf_alloc(unsigned int size, int kmalloc_flags) +{ + struct gs_buf *gb; + + if (size == 0) + return NULL; + + gb = (struct gs_buf *)kmalloc(sizeof(struct gs_buf), kmalloc_flags); + if (gb == NULL) + return NULL; + + gb->buf_buf = kmalloc(size, kmalloc_flags); + if (gb->buf_buf == NULL) { + kfree(gb); + return NULL; + } + + gb->buf_size = size; + gb->buf_get = gb->buf_put = gb->buf_buf; + + return gb; +} + +/* + * gs_buf_free + * + * Free the buffer and all associated memory. + */ +void gs_buf_free(struct gs_buf *gb) +{ + if (gb != NULL) { + if (gb->buf_buf != NULL) + kfree(gb->buf_buf); + kfree(gb); + } +} + +/* + * gs_buf_clear + * + * Clear out all data in the circular buffer. + */ +void gs_buf_clear(struct gs_buf *gb) +{ + if (gb != NULL) + gb->buf_get = gb->buf_put; + /* equivalent to a get of all data available */ +} + +/* + * gs_buf_data_avail + * + * Return the number of bytes of data available in the circular + * buffer. + */ +unsigned int gs_buf_data_avail(struct gs_buf *gb) +{ + if (gb != NULL) + return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size; + else + return 0; +} + +/* + * gs_buf_space_avail + * + * Return the number of bytes of space available in the circular + * buffer. + */ +unsigned int gs_buf_space_avail(struct gs_buf *gb) +{ + if (gb != NULL) + return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size; + else + return 0; +} + +/* + * gs_buf_put + * + * Copy data data from a user buffer and put it into the circular buffer. + * Restrict to the amount of space available. + * + * Return the number of bytes copied. + */ +unsigned int gs_buf_put(struct gs_buf *gb, const char *buf, unsigned int count) +{ + unsigned int len; + + if (gb == NULL) + return 0; + + len = gs_buf_space_avail(gb); + if (count > len) + count = len; + + if (count == 0) + return 0; + + len = gb->buf_buf + gb->buf_size - gb->buf_put; + if (count > len) { + memcpy(gb->buf_put, buf, len); + memcpy(gb->buf_buf, buf+len, count - len); + gb->buf_put = gb->buf_buf + count - len; + } else { + memcpy(gb->buf_put, buf, count); + if (count < len) + gb->buf_put += count; + else /* count == len */ + gb->buf_put = gb->buf_buf; + } + + return count; +} + +/* + * gs_buf_get + * + * Get data from the circular buffer and copy to the given buffer. + * Restrict to the amount of data available. + * + * Return the number of bytes copied. + */ +unsigned int gs_buf_get(struct gs_buf *gb, char *buf, unsigned int count) +{ + unsigned int len; + + if (gb == NULL) + return 0; + + len = gs_buf_data_avail(gb); + if (count > len) + count = len; + + if (count == 0) + return 0; + + len = gb->buf_buf + gb->buf_size - gb->buf_get; + if (count > len) { + memcpy(buf, gb->buf_get, len); + memcpy(buf+len, gb->buf_buf, count - len); + gb->buf_get = gb->buf_buf + count - len; + } else { + memcpy(buf, gb->buf_get, count); + if (count < len) + gb->buf_get += count; + else /* count == len */ + gb->buf_get = gb->buf_buf; + } + + return count; +} -- cgit v1.2.3