From 7ea7903e91418e5adde88c40fb65ba8047e77f67 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Mon, 16 Nov 2015 19:22:08 +0100 Subject: usb: gadget: atmel_usba_udc: Expose correct device speed commit d134c48d889ddceadf4c990e6f3df16b816ed5d4 upstream. Following changes that appeared in lk 4.0.0, the gadget udc driver for some ARM based Atmel SoCs (e.g. at91sam9x5 and sama5d3 families) incorrectly deduced full-speed USB link speed even when the hardware had negotiated a high-speed link. The fix is to make sure that the UDPHS Interrupt Enable Register value does not mask the SPEED bit in the Interrupt Status Register. For a mass storage gadget this problem lead to failures when the host had a USB 3 port with the xhci_hcd driver. If the host was a USB 2 port using the ehci_hcd driver then the mass storage gadget worked (but probably at a lower speed than it should have). Signed-off-by: Douglas Gilbert Reviewed-by: Boris Brezillon Fixes: 9870d895ad87 ("usb: atmel_usba_udc: Mask status with enabled irqs") Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/atmel_usba_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb/gadget/udc/atmel_usba_udc.c') diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 351d48550c33..d6ca3697d3c8 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -1634,7 +1634,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) spin_lock(&udc->lock); int_enb = usba_int_enb_get(udc); - status = usba_readl(udc, INT_STA) & int_enb; + status = usba_readl(udc, INT_STA) & (int_enb | USBA_HIGH_SPEED); DBG(DBG_INT, "irq, status=%#08x\n", status); if (status & USBA_DET_SUSPEND) { -- cgit v1.2.3