From 2400780ea18acd8df5895c6946c5eec3bf2f8859 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Mon, 24 Feb 2014 10:20:54 +0800 Subject: usb: phy: mxs: Add platform judgement code The mxs-phy has several bugs and features at different versions, the driver code can get it through of_device_id.data. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-mxs-usb.c | 58 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 9 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index b42897b6474c..cf58d8ec9901 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -1,5 +1,5 @@ /* - * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2012-2013 Freescale Semiconductor, Inc. * Copyright (C) 2012 Marek Vasut * on behalf of DENX Software Engineering GmbH * @@ -20,6 +20,7 @@ #include #include #include +#include #define DRIVER_NAME "mxs_phy" @@ -34,13 +35,55 @@ #define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) +#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) + +/* Do disconnection between PHY and controller without vbus */ +#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS BIT(0) + +/* + * The PHY will be in messy if there is a wakeup after putting + * bus to suspend (set portsc.suspendM) but before setting PHY to low + * power mode (set portsc.phcd). + */ +#define MXS_PHY_ABNORMAL_IN_SUSPEND BIT(1) + +/* + * The SOF sends too fast after resuming, it will cause disconnection + * between host and high speed device. + */ +#define MXS_PHY_SENDING_SOF_TOO_FAST BIT(2) + +struct mxs_phy_data { + unsigned int flags; +}; + +static const struct mxs_phy_data imx23_phy_data = { + .flags = MXS_PHY_ABNORMAL_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST, +}; + +static const struct mxs_phy_data imx6q_phy_data = { + .flags = MXS_PHY_SENDING_SOF_TOO_FAST | + MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, +}; + +static const struct mxs_phy_data imx6sl_phy_data = { + .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, +}; + +static const struct of_device_id mxs_phy_dt_ids[] = { + { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, }, + { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, }, + { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); + struct mxs_phy { struct usb_phy phy; struct clk *clk; + const struct mxs_phy_data *data; }; -#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) - static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) { int ret; @@ -138,6 +181,8 @@ static int mxs_phy_probe(struct platform_device *pdev) struct clk *clk; struct mxs_phy *mxs_phy; int ret; + const struct of_device_id *of_id = + of_match_device(mxs_phy_dt_ids, &pdev->dev); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(&pdev->dev, res); @@ -168,6 +213,7 @@ static int mxs_phy_probe(struct platform_device *pdev) mxs_phy->phy.type = USB_PHY_TYPE_USB2; mxs_phy->clk = clk; + mxs_phy->data = of_id->data; platform_set_drvdata(pdev, mxs_phy); @@ -187,12 +233,6 @@ static int mxs_phy_remove(struct platform_device *pdev) return 0; } -static const struct of_device_id mxs_phy_dt_ids[] = { - { .compatible = "fsl,imx23-usbphy", }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); - static struct platform_driver mxs_phy_driver = { .probe = mxs_phy_probe, .remove = mxs_phy_remove, -- cgit v1.2.3