From a8edc42a11e1d7b7e158d4026670fd83854dfcc2 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 22 Mar 2012 14:01:07 -0700 Subject: usb: Put USB Kconfig items back under USB. commit 53c6bc24fdc8db87109a5760579cbb060fa644cf (usb: Don't make USB_ARCH_HAS_{XHCI,OHCI,EHCI} depend on USB_SUPPORT.) Removed the dependency of the USB_ARCH_HAS_* symbols on USB_SUPPORT. However the resulting Kconfig somehow caused many of the USB configuration items to appear under the top level devices menu. To fix this we reunite the 'menuconfig USB_SUPPORT' with the 'if USB_SUPPORT', and the config items magically go back to their desired location. Reported-by: Julian Wollrath Reported-by: Nobuhiro Iwamatsu Reported-by: Borislav Petkov Reported-by: Rupesh Gujare Reported-by: Feng King Reported-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: David Daney Tested-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Kconfig | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index cbd8f5f80596..76316a33061b 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -2,14 +2,6 @@ # USB device configuration # -menuconfig USB_SUPPORT - bool "USB support" - depends on HAS_IOMEM - default y - ---help--- - This option adds core support for Universal Serial Bus (USB). - You will also need drivers from the following menu to make use of it. - # many non-PCI SOC chips embed OHCI config USB_ARCH_HAS_OHCI boolean @@ -63,6 +55,14 @@ config USB_ARCH_HAS_XHCI boolean default PCI +menuconfig USB_SUPPORT + bool "USB support" + depends on HAS_IOMEM + default y + ---help--- + This option adds core support for Universal Serial Bus (USB). + You will also need drivers from the following menu to make use of it. + if USB_SUPPORT config USB_COMMON -- cgit v1.2.3 From c825bab0cef8b90bab8b63eb5686b8c8eb22e798 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Mon, 19 Mar 2012 15:20:57 +0800 Subject: usb: storage: fix lockdep warning inside usb_stor_pre_reset(v2) This patch fixes one lockdep warning[1] inside usb_stor_pre_reset. If the current configuration includes multiple mass storage interfaces, the 'AA' lockdep warning will be triggered since the lock class of 'us->dev_mutex' is acquired two times in .reset path. It isn't a real deadlock, so just take the lockdep_set_class annotation to remove the warning. [1], lockdep warning log :[ INFO: possible recursive locking detected ] :3.3.0-0.rc5.git3.1.fc17.x86_64 #1 Tainted: G W :--------------------------------------------- :usb-storage/14846 is trying to acquire lock: : (&(us->dev_mutex)){+.+.+.}, at: [] usb_stor_pre_reset+0x1c/0x20 [usb_storage] :but task is already holding lock: : (&(us->dev_mutex)){+.+.+.}, at: [] usb_stor_pre_reset+0x1c/0x20 [usb_storage] :other info that might help us debug this: : Possible unsafe locking scenario: : CPU0 : ---- : lock(&(us->dev_mutex)); : lock(&(us->dev_mutex)); : *** DEADLOCK *** : May be due to missing lock nesting notation :2 locks held by usb-storage/14846: : #0: (&__lockdep_no_validate__){......}, at: [] usb_lock_device_for_reset+0x95/0x100 : #1: (&(us->dev_mutex)){+.+.+.}, at: [] usb_stor_pre_reset+0x1c/0x20 [usb_storage] :stack backtrace: :Pid: 14846, comm: usb-storage Tainted: G W 3.3.0-0.rc5.git3.1.fc17.x86_64 #1 :Call Trace: : [] __lock_acquire+0x168f/0x1bb0 : [] ? native_sched_clock+0x13/0x80 : [] ? sched_clock+0x9/0x10 : [] ? sched_clock+0x9/0x10 : [] ? sched_clock_local+0x25/0xa0 : [] lock_acquire+0xa1/0x1e0 : [] ? usb_stor_pre_reset+0x1c/0x20 [usb_storage] : [] mutex_lock_nested+0x76/0x3a0 : [] ? usb_stor_pre_reset+0x1c/0x20 [usb_storage] : [] ? usb_stor_pre_reset+0x1c/0x20 [usb_storage] : [] usb_stor_pre_reset+0x1c/0x20 [usb_storage] : [] usb_reset_device+0x7d/0x190 : [] usb_stor_port_reset+0x7c/0x80 [usb_storage] : [] usb_stor_invoke_transport+0x94/0x560 [usb_storage] : [] ? mark_held_locks+0xb2/0x130 : [] ? _raw_spin_unlock_irq+0x30/0x50 : [] usb_stor_transparent_scsi_command+0xe/0x10 [usb_storage] : [] usb_stor_control_thread+0x173/0x280 [usb_storage] : [] ? fill_inquiry_response+0x20/0x20 [usb_storage] : [] kthread+0xb7/0xc0 : [] kernel_thread_helper+0x4/0x10 : [] ? retint_restore_args+0x13/0x13 : [] ? kthread_worker_fn+0x1a0/0x1a0 : [] ? gs_change+0x13/0x13 Reported-By: Dave Jones Signed-off-by: Ming Lei Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/usb.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index c18538e4a6db..2653e73db623 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -132,6 +132,35 @@ static struct us_unusual_dev for_dynamic_ids = #undef COMPLIANT_DEV #undef USUAL_DEV +#ifdef CONFIG_LOCKDEP + +static struct lock_class_key us_interface_key[USB_MAXINTERFACES]; + +static void us_set_lock_class(struct mutex *mutex, + struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct usb_host_config *config = udev->actconfig; + int i; + + for (i = 0; i < config->desc.bNumInterfaces; i++) { + if (config->interface[i] == intf) + break; + } + + BUG_ON(i == config->desc.bNumInterfaces); + + lockdep_set_class(mutex, &us_interface_key[i]); +} + +#else + +static void us_set_lock_class(struct mutex *mutex, + struct usb_interface *intf) +{ +} + +#endif #ifdef CONFIG_PM /* Minimal support for suspend and resume */ @@ -895,6 +924,7 @@ int usb_stor_probe1(struct us_data **pus, *pus = us = host_to_us(host); memset(us, 0, sizeof(struct us_data)); mutex_init(&(us->dev_mutex)); + us_set_lock_class(&us->dev_mutex, intf); init_completion(&us->cmnd_ready); init_completion(&(us->notify)); init_waitqueue_head(&us->delay_wait); -- cgit v1.2.3 From bcf398537630bf20b4dbe59ba855b69f404c93cf Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 22 Mar 2012 11:00:21 -0400 Subject: USB: don't clear urb->dev in scatter-gather library This patch (as1517b) fixes an error in the USB scatter-gather library. The library code uses urb->dev to determine whether or nor an URB is currently active; the completion handler sets urb->dev to NULL. However the core unlinking routines need to use urb->dev. Since unlinking always racing with completion, the completion handler must not clear urb->dev -- it can lead to invalid memory accesses when a transfer has to be cancelled. This patch fixes the problem by getting rid of the lines that clear urb->dev after urb has been submitted. As a result we may end up trying to unlink an URB that failed in submission or that has already completed, so an extra check is added after each unlink to avoid printing an error message when this happens. The checks are updated in both sg_complete() and sg_cancel(), and the second is updated to match the first (currently it prints out unnecessary warning messages if a device is unplugged while a transfer is in progress). Signed-off-by: Alan Stern Reported-and-tested-by: Illia Zaitsev CC: Ming Lei CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/message.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index b3bdfede45e6..aed3e07942d4 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -308,7 +308,8 @@ static void sg_complete(struct urb *urb) retval = usb_unlink_urb(io->urbs [i]); if (retval != -EINPROGRESS && retval != -ENODEV && - retval != -EBUSY) + retval != -EBUSY && + retval != -EIDRM) dev_err(&io->dev->dev, "%s, unlink --> %d\n", __func__, retval); @@ -317,7 +318,6 @@ static void sg_complete(struct urb *urb) } spin_lock(&io->lock); } - urb->dev = NULL; /* on the last completion, signal usb_sg_wait() */ io->bytes += urb->actual_length; @@ -524,7 +524,6 @@ void usb_sg_wait(struct usb_sg_request *io) case -ENXIO: /* hc didn't queue this one */ case -EAGAIN: case -ENOMEM: - io->urbs[i]->dev = NULL; retval = 0; yield(); break; @@ -542,7 +541,6 @@ void usb_sg_wait(struct usb_sg_request *io) /* fail any uncompleted urbs */ default: - io->urbs[i]->dev = NULL; io->urbs[i]->status = retval; dev_dbg(&io->dev->dev, "%s, submit --> %d\n", __func__, retval); @@ -593,7 +591,10 @@ void usb_sg_cancel(struct usb_sg_request *io) if (!io->urbs [i]->dev) continue; retval = usb_unlink_urb(io->urbs [i]); - if (retval != -EINPROGRESS && retval != -EBUSY) + if (retval != -EINPROGRESS + && retval != -ENODEV + && retval != -EBUSY + && retval != -EIDRM) dev_warn(&io->dev->dev, "%s, unlink --> %d\n", __func__, retval); } -- cgit v1.2.3 From da8bfb090c2b30af9f3879443355f7eb1d0fe10a Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 28 Mar 2012 16:13:28 -0400 Subject: USB documentation: explain lifetime rules for unlinking URBs This patch (as1534c) updates the documentation for usb_unlink_urb and related functions. It explains that the caller must prevent the URB being unlinked from getting deallocated while the unlink is taking place. Signed-off-by: Alan Stern CC: Ming Lei Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/urb.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 7239a73c1b8c..cd9b3a2cd8a7 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -539,6 +539,10 @@ EXPORT_SYMBOL_GPL(usb_submit_urb); * never submitted, or it was unlinked before, or the hardware is already * finished with it), even if the completion handler has not yet run. * + * The URB must not be deallocated while this routine is running. In + * particular, when a driver calls this routine, it must insure that the + * completion handler cannot deallocate the URB. + * * Unlinking and Endpoint Queues: * * [The behaviors and guarantees described below do not apply to virtual @@ -603,6 +607,10 @@ EXPORT_SYMBOL_GPL(usb_unlink_urb); * with error -EPERM. Thus even if the URB's completion handler always * tries to resubmit, it will not succeed and the URB will become idle. * + * The URB must not be deallocated while this routine is running. In + * particular, when a driver calls this routine, it must insure that the + * completion handler cannot deallocate the URB. + * * This routine may not be used in an interrupt context (such as a bottom * half or a completion handler), or when holding a spinlock, or in other * situations where the caller can't schedule(). @@ -640,6 +648,10 @@ EXPORT_SYMBOL_GPL(usb_kill_urb); * with error -EPERM. Thus even if the URB's completion handler always * tries to resubmit, it will not succeed and the URB will become idle. * + * The URB must not be deallocated while this routine is running. In + * particular, when a driver calls this routine, it must insure that the + * completion handler cannot deallocate the URB. + * * This routine may not be used in an interrupt context (such as a bottom * half or a completion handler), or when holding a spinlock, or in other * situations where the caller can't schedule(). -- cgit v1.2.3 From a2457ee691edeffb511dbff9a69008f480192197 Mon Sep 17 00:00:00 2001 From: Michael BRIGHT Date: Thu, 22 Mar 2012 18:42:52 +0100 Subject: USB: remove compile warning on gadget/inode.c Removed unused "restart:" label, which was causing compiler warning. Signed-off-by: Michael BRIGHT Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/inode.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index 8793f32bab11..e58b16442971 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -1574,7 +1574,6 @@ static void destroy_ep_files (struct dev_data *dev) DBG (dev, "%s %d\n", __func__, dev->state); /* dev->state must prevent interference */ -restart: spin_lock_irq (&dev->lock); while (!list_empty(&dev->epfiles)) { struct ep_data *ep; -- cgit v1.2.3 From ce5c9851855bab190c9a142761d54ba583ab094c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 23 Mar 2012 15:23:18 +0100 Subject: USB: pl2303: fix DTR/RTS being raised on baud rate change MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit DTR/RTS should only be raised when changing baudrate from B0 and not on any baud rate change (> B0). Reported-by: Søren Holm Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index ff4a174fa5de..a1a9062954c4 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -420,7 +420,7 @@ static void pl2303_set_termios(struct tty_struct *tty, control = priv->line_control; if ((cflag & CBAUD) == B0) priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); - else + else if ((old_termios->c_cflag & CBAUD) == B0) priv->line_control |= (CONTROL_DTR | CONTROL_RTS); if (control != priv->line_control) { control = priv->line_control; -- cgit v1.2.3 From 9ac2feb22b5b821d81463bef92698ef7682a3145 Mon Sep 17 00:00:00 2001 From: Santiago Garcia Mantinan Date: Mon, 19 Mar 2012 18:17:00 +0100 Subject: USB: option: re-add NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED to option_id array Re-add NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED to option_id array Signed-off-by: Santiago Garcia Mantinan Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 836cfa9a515f..f4465ccddc35 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -708,6 +708,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED3) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED4) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED5) }, -- cgit v1.2.3 From 3a450850e2bb0f92cacb12da90fe98eccd105468 Mon Sep 17 00:00:00 2001 From: Aleksey Babahin Date: Tue, 20 Mar 2012 00:46:31 +0400 Subject: USB: serial: metro-usb: Fix idProduct for Uni-Directional mode. The right idProduct for Metrologic Bar Code Scanner in Uni-Directional Serial Emulation mode is 0x0700. Also rename idProduct for Bi-Directional mode to be a bit more informative. Signed-off-by: Aleksey Babahin Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/metro-usb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index 6e1622f2a297..08d16e8c002d 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -27,8 +27,8 @@ /* Product information. */ #define FOCUS_VENDOR_ID 0x0C2E -#define FOCUS_PRODUCT_ID 0x0720 -#define FOCUS_PRODUCT_ID_UNI 0x0710 +#define FOCUS_PRODUCT_ID_BI 0x0720 +#define FOCUS_PRODUCT_ID_UNI 0x0700 #define METROUSB_SET_REQUEST_TYPE 0x40 #define METROUSB_SET_MODEM_CTRL_REQUEST 10 @@ -47,7 +47,7 @@ struct metrousb_private { /* Device table list. */ static struct usb_device_id id_table[] = { - { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID) }, + { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_BI) }, { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_UNI) }, { }, /* Terminating entry. */ }; -- cgit v1.2.3 From 891a3b1fddb24b4b53426685bd0390bb74c9b5b3 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 28 Mar 2012 16:10:49 -0400 Subject: USB: fix bug in serial driver unregistration This patch (as1536) fixes a bug in the USB serial core. Unloading and reloading a serial driver while a serial device is plugged in causes errors because of the code in usb_serial_disconnect() that tries to make sure the port_remove method is called. With the new order of driver registration introduced in the 3.4 kernel, this is definitely not the right thing to do (if indeed it ever was). The patch removes that whole section code, along with the mechanism for keeping track of each port's registration state, which is no longer needed. The driver core can handle all that stuff for us. Note: This has been tested only with one or two USB serial drivers. In theory, other drivers might still run into trouble. But if they do, it will be the fault of the drivers, not of this patch -- that is, the drivers will need to be fixed. Signed-off-by: Alan Stern Reported-and-tested-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/bus.c | 5 ----- drivers/usb/serial/usb-serial.c | 23 ++--------------------- 2 files changed, 2 insertions(+), 26 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 7f547dc3a590..ed8adb052ca7 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -60,8 +60,6 @@ static int usb_serial_device_probe(struct device *dev) retval = -ENODEV; goto exit; } - if (port->dev_state != PORT_REGISTERING) - goto exit; driver = port->serial->type; if (driver->port_probe) { @@ -98,9 +96,6 @@ static int usb_serial_device_remove(struct device *dev) if (!port) return -ENODEV; - if (port->dev_state != PORT_UNREGISTERING) - return retval; - device_remove_file(&port->dev, &dev_attr_port_number); driver = port->serial->type; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 69230f01056a..5413bd500781 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1070,17 +1070,12 @@ int usb_serial_probe(struct usb_interface *interface, port = serial->port[i]; dev_set_name(&port->dev, "ttyUSB%d", port->number); dbg ("%s - registering %s", __func__, dev_name(&port->dev)); - port->dev_state = PORT_REGISTERING; device_enable_async_suspend(&port->dev); retval = device_add(&port->dev); - if (retval) { + if (retval) dev_err(&port->dev, "Error registering port device, " "continuing\n"); - port->dev_state = PORT_UNREGISTERED; - } else { - port->dev_state = PORT_REGISTERED; - } } usb_serial_console_init(debug, minor); @@ -1124,22 +1119,8 @@ void usb_serial_disconnect(struct usb_interface *interface) } kill_traffic(port); cancel_work_sync(&port->work); - if (port->dev_state == PORT_REGISTERED) { - - /* Make sure the port is bound so that the - * driver's port_remove method is called. - */ - if (!port->dev.driver) { - int rc; - - port->dev.driver = - &serial->type->driver; - rc = device_bind_driver(&port->dev); - } - port->dev_state = PORT_UNREGISTERING; + if (device_is_registered(&port->dev)) device_del(&port->dev); - port->dev_state = PORT_UNREGISTERED; - } } } serial->type->disconnect(serial); -- cgit v1.2.3 From cd4376e23a59a2adf3084cb5f4a523e6d5fd4e49 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 28 Mar 2012 15:56:17 -0400 Subject: USB: don't ignore suspend errors for root hubs This patch (as1532) fixes a mistake in the USB suspend code. When the system is going to sleep, we should ignore errors in powering down USB devices, because they don't really matter. The devices will go to low power anyway when the entire USB bus gets suspended (except for SuperSpeed devices; maybe they will need special treatment later). However we should not ignore errors in suspending root hubs, especially if the error indicates that the suspend raced with a wakeup request. Doing so might leave the bus powered on while the system was supposed to be asleep, or it might cause the suspend of the root hub's parent controller device to fail, or it might cause a wakeup request to be ignored. The patch fixes the problem by ignoring errors only when the device in question is not a root hub. Signed-off-by: Alan Stern Reported-by: Chen Peter CC: Tested-by: Chen Peter Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index f8e2d6d52e5c..9a56635dc19c 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1189,8 +1189,13 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) if (status == 0) { status = usb_suspend_device(udev, msg); - /* Again, ignore errors during system sleep transitions */ - if (!PMSG_IS_AUTO(msg)) + /* + * Ignore errors from non-root-hub devices during + * system sleep transitions. For the most part, + * these devices should go to low power anyway when + * the entire bus is suspended. + */ + if (udev->parent && !PMSG_IS_AUTO(msg)) status = 0; } -- cgit v1.2.3 From fca5430d48d53eaf103498c33fd0d1984b9f448b Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Mon, 26 Mar 2012 21:19:40 +0100 Subject: USB: ftdi_sio: fix status line change handling for TIOCMIWAIT and TIOCGICOUNT Handling of TIOCMIWAIT was changed by commit 1d749f9afa657f6ee9336b2bc1fcd750a647d157 USB: ftdi_sio.c: Use ftdi async_icount structure for TIOCMIWAIT, as in other drivers FTDI_STATUS_B0_MASK does not indicate the changed modem status lines, it indicates the value of the current modem status lines. An xor is still required to determine which lines have changed. The count was only being incremented if the line was high. The only reason TIOCMIWAIT still worked was because the status packet is repeated every 1ms, so the count was always changing. The wakeup itself still ran based on the status lines changing. This change fixes handling of updates to the modem status lines and allows multiple processes to use TIOCMIWAIT concurrently. Tested with two processes waiting on different status lines being toggled independently. Signed-off-by: Simon Arlott Cc: Uwe Bonnes Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index ff8605b4b4be..c02e4602d90a 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -75,7 +75,7 @@ struct ftdi_private { unsigned long last_dtr_rts; /* saved modem control outputs */ struct async_icount icount; wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ - char prev_status, diff_status; /* Used for TIOCMIWAIT */ + char prev_status; /* Used for TIOCMIWAIT */ char transmit_empty; /* If transmitter is empty or not */ struct usb_serial_port *port; __u16 interface; /* FT2232C, FT2232H or FT4232H port interface @@ -1982,17 +1982,19 @@ static int ftdi_process_packet(struct tty_struct *tty, N.B. packet may be processed more than once, but differences are only processed once. */ status = packet[0] & FTDI_STATUS_B0_MASK; - if (status & FTDI_RS0_CTS) - priv->icount.cts++; - if (status & FTDI_RS0_DSR) - priv->icount.dsr++; - if (status & FTDI_RS0_RI) - priv->icount.rng++; - if (status & FTDI_RS0_RLSD) - priv->icount.dcd++; if (status != priv->prev_status) { - priv->diff_status |= status ^ priv->prev_status; - wake_up_interruptible(&priv->delta_msr_wait); + char diff_status = status ^ priv->prev_status; + + if (diff_status & FTDI_RS0_CTS) + priv->icount.cts++; + if (diff_status & FTDI_RS0_DSR) + priv->icount.dsr++; + if (diff_status & FTDI_RS0_RI) + priv->icount.rng++; + if (diff_status & FTDI_RS0_RLSD) + priv->icount.dcd++; + + wake_up_interruptible_all(&priv->delta_msr_wait); priv->prev_status = status; } -- cgit v1.2.3 From 876ae50d94b02f3f523aa451b45ec5fb9c25d221 Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Mon, 26 Mar 2012 23:27:59 +0100 Subject: USB: ftdi_sio: fix race condition in TIOCMIWAIT, and abort of TIOCMIWAIT when the device is removed MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are two issues here, one is that the device is generating spurious very fast modem status line changes somewhere: CTS becomes high then low 18µs later: [121226.924373] ftdi_process_packet: prev rng=0 dsr=10 dcd=0 cts=6 [121226.924378] ftdi_process_packet: status=10 prev=00 diff=10 [121226.924382] ftdi_process_packet: now rng=0 dsr=10 dcd=0 cts=7 (wake_up_interruptible is called) [121226.924391] ftdi_process_packet: prev rng=0 dsr=10 dcd=0 cts=7 [121226.924394] ftdi_process_packet: status=00 prev=10 diff=10 [121226.924397] ftdi_process_packet: now rng=0 dsr=10 dcd=0 cts=8 (wake_up_interruptible is called) This wakes up the task in TIOCMIWAIT: [121226.924405] ftdi_ioctl: 19451 rng=0->0 dsr=10->10 dcd=0->0 cts=6->8 (wait from 20:51:46 returns and observes both changes) Which then calls TIOCMIWAIT again: 20:51:46.400239 ioctl(3, TIOCMIWAIT, 0x20) = 0 22:11:09.441818 ioctl(3, TIOCMGET, [TIOCM_DTR|TIOCM_RTS]) = 0 22:11:09.442812 ioctl(3, TIOCMIWAIT, 0x20) = -1 EIO (Input/output error) (the second wake_up_interruptible takes effect and an I/O error occurs) The other issue is that TIOCMIWAIT will wait forever (unless the task is interrupted) if the device is removed. This change removes the -EIO return that occurs if the counts don't appear to have changed. Multiple counts may have been processed as one or the waiting task may have started waiting after recording the current count. It adds a bool to indicate that the device has been removed so that TIOCMIWAIT doesn't wait forever, and wakes up any tasks so that they can return -EIO. Signed-off-by: Simon Arlott Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index c02e4602d90a..02e7f2d32d52 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -76,6 +76,7 @@ struct ftdi_private { struct async_icount icount; wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ char prev_status; /* Used for TIOCMIWAIT */ + bool dev_gone; /* Used to abort TIOCMIWAIT */ char transmit_empty; /* If transmitter is empty or not */ struct usb_serial_port *port; __u16 interface; /* FT2232C, FT2232H or FT4232H port interface @@ -1681,6 +1682,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) init_waitqueue_head(&priv->delta_msr_wait); priv->flags = ASYNC_LOW_LATENCY; + priv->dev_gone = false; if (quirk && quirk->port_probe) quirk->port_probe(priv); @@ -1839,6 +1841,9 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) dbg("%s", __func__); + priv->dev_gone = true; + wake_up_interruptible_all(&priv->delta_msr_wait); + remove_sysfs_attrs(port); kref_put(&priv->kref, ftdi_sio_priv_release); @@ -2397,15 +2402,12 @@ static int ftdi_ioctl(struct tty_struct *tty, */ case TIOCMIWAIT: cprev = priv->icount; - while (1) { + while (!priv->dev_gone) { interruptible_sleep_on(&priv->delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; cnow = priv->icount; - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || @@ -2414,7 +2416,7 @@ static int ftdi_ioctl(struct tty_struct *tty, } cprev = cnow; } - /* not reached */ + return -EIO; break; case TIOCSERGETLSR: return get_lsr_info(port, (struct serial_struct __user *)arg); -- cgit v1.2.3 From c5d703dcc776cb542b41665f2b7e2ba054efb4a7 Mon Sep 17 00:00:00 2001 From: Anton Samokhvalov Date: Wed, 4 Apr 2012 22:26:01 +0400 Subject: USB: sierra: add support for Sierra Wireless MC7710 Just add new device id. 3G works fine, LTE not tested. Signed-off-by: Anton Samokhvalov Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index f14465a83dd1..fdd5aa2c8d82 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -289,6 +289,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1199, 0x6856) }, /* Sierra Wireless AirCard 881 U */ { USB_DEVICE(0x1199, 0x6859) }, /* Sierra Wireless AirCard 885 E */ { USB_DEVICE(0x1199, 0x685A) }, /* Sierra Wireless AirCard 885 E */ + { USB_DEVICE(0x1199, 0x68A2) }, /* Sierra Wireless MC7710 */ /* Sierra Wireless C885 */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)}, /* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */ -- cgit v1.2.3 From 879d38e6bc36d73b0ac40ec9b0d839fda9fa8b1a Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 3 Apr 2012 15:24:18 -0400 Subject: USB: fix race between root-hub suspend and remote wakeup This patch (as1533) fixes a race between root-hub suspend and remote wakeup. If a wakeup event occurs while a root hub is suspending, it might not cause the suspend to fail. Although the host controller drivers check for pending wakeup events at the start of their bus_suspend routines, they generally do not check for wakeup events while the routines are running. In addition, if a wakeup event occurs any time after khubd is frozen and before the root hub is fully suspended, it might not cause a system sleep transition to fail. For example, the host controller drivers do not fail root-hub suspends when a connect-change event is pending. To fix both these issues, this patch causes hcd_bus_suspend() to query the controller driver's hub_status_data method after a root hub is suspended, if the root hub is enabled for wakeup. Any pending status changes will count as wakeup events, causing the root hub to be resumed and the overall suspend to fail with -EBUSY. A significant point is that not all events are reflected immediately in the status bits. Both EHCI and UHCI controllers notify the CPU when remote wakeup begins on a port, but the port's suspend-change status bit doesn't get set until after the port has completed the transition out of the suspend state, some 25 milliseconds later. Consequently, the patch will interpret any nonzero return value from hub_status_data as indicating a pending event, even if none of the status bits are set in the data buffer. Follow-up patches make the necessary changes to ehci-hcd and uhci-hcd. Signed-off-by: Alan Stern CC: Sarah Sharp CC: Chen Peter-B29397 Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 9d7fc9a39933..140d3e11f212 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1978,6 +1978,18 @@ int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg) if (status == 0) { usb_set_device_state(rhdev, USB_STATE_SUSPENDED); hcd->state = HC_STATE_SUSPENDED; + + /* Did we race with a root-hub wakeup event? */ + if (rhdev->do_remote_wakeup) { + char buffer[6]; + + status = hcd->driver->hub_status_data(hcd, buffer); + if (status != 0) { + dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n"); + hcd_bus_resume(rhdev, PMSG_AUTO_RESUME); + status = -EBUSY; + } + } } else { spin_lock_irq(&hcd_root_hub_lock); if (!HCD_DEAD(hcd)) { -- cgit v1.2.3 From a448e4dc25303fe551e4dafe16c8c7c34f1b9d82 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 3 Apr 2012 15:24:30 -0400 Subject: EHCI: keep track of ports being resumed and indicate in hub_status_data This patch (as1537) adds a bit-array to ehci-hcd for keeping track of which ports are undergoing a resume transition. If any of the bits are set when ehci_hub_status_data() is called, the routine will return a nonzero value even if no ports have any status changes pending. This will allow usbcore to handle races between root-hub suspend and port wakeup. Signed-off-by: Alan Stern CC: Sarah Sharp CC: Chen Peter-B29397 Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 3 +++ drivers/usb/host/ehci-hub.c | 31 ++++++++++++++++--------------- drivers/usb/host/ehci-tegra.c | 2 ++ drivers/usb/host/ehci.h | 2 ++ 4 files changed, 23 insertions(+), 15 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 057cdda7a489..806cc95317aa 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -347,6 +347,8 @@ static int ehci_reset (struct ehci_hcd *ehci) if (ehci->debug) dbgp_external_startup(); + ehci->port_c_suspend = ehci->suspended_ports = + ehci->resuming_ports = 0; return retval; } @@ -939,6 +941,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) * like usb_port_resume() does. */ ehci->reset_done[i] = jiffies + msecs_to_jiffies(25); + set_bit(i, &ehci->resuming_ports); ehci_dbg (ehci, "port %d remote wakeup\n", i + 1); mod_timer(&hcd->rh_timer, ehci->reset_done[i]); } diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 256fbd42e48c..38fe07623152 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -223,15 +223,10 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) * remote wakeup, we must fail the suspend. */ if (hcd->self.root_hub->do_remote_wakeup) { - port = HCS_N_PORTS(ehci->hcs_params); - while (port--) { - if (ehci->reset_done[port] != 0) { - spin_unlock_irq(&ehci->lock); - ehci_dbg(ehci, "suspend failed because " - "port %d is resuming\n", - port + 1); - return -EBUSY; - } + if (ehci->resuming_ports) { + spin_unlock_irq(&ehci->lock); + ehci_dbg(ehci, "suspend failed because a port is resuming\n"); + return -EBUSY; } } @@ -554,16 +549,12 @@ static int ehci_hub_status_data (struct usb_hcd *hcd, char *buf) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); - u32 temp, status = 0; + u32 temp, status; u32 mask; int ports, i, retval = 1; unsigned long flags; u32 ppcd = 0; - /* if !USB_SUSPEND, root hub timers won't get shut down ... */ - if (ehci->rh_state != EHCI_RH_RUNNING) - return 0; - /* init status to no-changes */ buf [0] = 0; ports = HCS_N_PORTS (ehci->hcs_params); @@ -572,6 +563,11 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) retval++; } + /* Inform the core about resumes-in-progress by returning + * a non-zero value even if there are no status changes. + */ + status = ehci->resuming_ports; + /* Some boards (mostly VIA?) report bogus overcurrent indications, * causing massive log spam unless we completely ignore them. It * may be relevant that VIA VT8235 controllers, where PORT_POWER is @@ -846,6 +842,7 @@ static int ehci_hub_control ( ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESUME), status_reg); + clear_bit(wIndex, &ehci->resuming_ports); retval = handshake(ehci, status_reg, PORT_RESUME, 0, 2000 /* 2msec */); if (retval != 0) { @@ -864,6 +861,7 @@ static int ehci_hub_control ( ehci->reset_done[wIndex])) { status |= USB_PORT_STAT_C_RESET << 16; ehci->reset_done [wIndex] = 0; + clear_bit(wIndex, &ehci->resuming_ports); /* force reset to complete */ ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET), @@ -884,8 +882,10 @@ static int ehci_hub_control ( ehci_readl(ehci, status_reg)); } - if (!(temp & (PORT_RESUME|PORT_RESET))) + if (!(temp & (PORT_RESUME|PORT_RESET))) { ehci->reset_done[wIndex] = 0; + clear_bit(wIndex, &ehci->resuming_ports); + } /* transfer dedicated ports to the companion hc */ if ((temp & PORT_CONNECT) && @@ -920,6 +920,7 @@ static int ehci_hub_control ( status |= USB_PORT_STAT_SUSPEND; } else if (test_bit(wIndex, &ehci->suspended_ports)) { clear_bit(wIndex, &ehci->suspended_ports); + clear_bit(wIndex, &ehci->resuming_ports); ehci->reset_done[wIndex] = 0; if (temp & PORT_PE) set_bit(wIndex, &ehci->port_c_suspend); diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 3de48a2d7955..73544bd440bd 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -224,6 +224,7 @@ static int tegra_ehci_hub_control( temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); /* start resume signalling */ ehci_writel(ehci, temp | PORT_RESUME, status_reg); + set_bit(wIndex-1, &ehci->resuming_ports); spin_unlock_irqrestore(&ehci->lock, flags); msleep(20); @@ -236,6 +237,7 @@ static int tegra_ehci_hub_control( pr_err("%s: timeout waiting for SUSPEND\n", __func__); ehci->reset_done[wIndex-1] = 0; + clear_bit(wIndex-1, &ehci->resuming_ports); tegra->port_resuming = 1; goto done; diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 8f9acbc96fde..2694ed6558d2 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -117,6 +117,8 @@ struct ehci_hcd { /* one per controller */ the change-suspend feature turned on */ unsigned long suspended_ports; /* which ports are suspended */ + unsigned long resuming_ports; /* which ports have + started to resume */ /* per-HC memory pools (could be per-bus, but ...) */ struct dma_pool *qh_pool; /* qh per active urb */ -- cgit v1.2.3 From b446b96fd11b69b7c4ecd47d869cff9094fd8802 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 3 Apr 2012 15:24:43 -0400 Subject: UHCI: hub_status_data should indicate if ports are resuming This patch (as1538) causes uhci_hub_status_data() to return a nonzero value when any port is undergoing a resume transition while the root hub is suspended. This will allow usbcore to handle races between root-hub suspend and port wakeup. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-hub.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index 045cde4cbc3d..768d54295a20 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -196,11 +196,12 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf) status = get_hub_status_data(uhci, buf); switch (uhci->rh_state) { - case UHCI_RH_SUSPENDING: case UHCI_RH_SUSPENDED: /* if port change, ask to be resumed */ - if (status || uhci->resuming_ports) + if (status || uhci->resuming_ports) { + status = 1; usb_hcd_resume_root_hub(hcd); + } break; case UHCI_RH_AUTO_STOPPED: -- cgit v1.2.3 From a65a6f14dc24a90bde3f5d0073ba2364476200bf Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 20 Mar 2012 16:59:33 +0100 Subject: USB: serial: fix race between probe and open Fix race between probe and open by making sure that the disconnected flag is not cleared until all ports have been registered. A call to tty_open while probe is running may get a reference to the serial structure in serial_install before its ports have been registered. This may lead to usb_serial_core calling driver open before port is fully initialised. With ftdi_sio this result in the following NULL-pointer dereference as the private data has not been initialised at open: [ 199.698286] IP: [] ftdi_open+0x59/0xe0 [ftdi_sio] [ 199.698297] *pde = 00000000 [ 199.698303] Oops: 0000 [#1] PREEMPT SMP [ 199.698313] Modules linked in: ftdi_sio usbserial [ 199.698323] [ 199.698327] Pid: 1146, comm: ftdi_open Not tainted 3.2.11 #70 Dell Inc. Vostro 1520/0T816J [ 199.698339] EIP: 0060:[] EFLAGS: 00010286 CPU: 0 [ 199.698344] EIP is at ftdi_open+0x59/0xe0 [ftdi_sio] [ 199.698348] EAX: 0000003e EBX: f5067000 ECX: 00000000 EDX: 80000600 [ 199.698352] ESI: f48d8800 EDI: 00000001 EBP: f515dd54 ESP: f515dcfc [ 199.698356] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 199.698361] Process ftdi_open (pid: 1146, ti=f515c000 task=f481e040 task.ti=f515c000) [ 199.698364] Stack: [ 199.698368] f811a9fe f811a9e0 f811b3ef 00000000 00000000 00001388 00000000 f4a86800 [ 199.698387] 00000002 00000000 f806e68e 00000000 f532765c f481e040 00000246 22222222 [ 199.698479] 22222222 22222222 22222222 f5067004 f5327600 f5327638 f515dd74 f806e6ab [ 199.698496] Call Trace: [ 199.698504] [] ? serial_activate+0x2e/0x70 [usbserial] [ 199.698511] [] serial_activate+0x4b/0x70 [usbserial] [ 199.698521] [] tty_port_open+0x7c/0xd0 [ 199.698527] [] ? serial_set_termios+0xa0/0xa0 [usbserial] [ 199.698534] [] serial_open+0x2f/0x70 [usbserial] [ 199.698540] [] tty_open+0x20c/0x510 [ 199.698546] [] chrdev_open+0xe7/0x230 [ 199.698553] [] __dentry_open+0x1f2/0x390 [ 199.698559] [] ? _raw_spin_unlock+0x2c/0x50 [ 199.698565] [] nameidata_to_filp+0x66/0x80 [ 199.698570] [] ? cdev_put+0x20/0x20 [ 199.698576] [] do_last+0x198/0x730 [ 199.698581] [] path_openat+0xa0/0x350 [ 199.698587] [] do_filp_open+0x35/0x80 [ 199.698593] [] ? _raw_spin_unlock+0x2c/0x50 [ 199.698599] [] ? alloc_fd+0xc0/0x100 [ 199.698605] [] ? getname_flags+0x72/0x120 [ 199.698611] [] do_sys_open+0xf0/0x1c0 [ 199.698617] [] ? trace_hardirqs_on_thunk+0xc/0x10 [ 199.698623] [] sys_open+0x2e/0x40 [ 199.698628] [] sysenter_do_call+0x12/0x36 [ 199.698632] Code: 85 89 00 00 00 8b 16 8b 4d c0 c1 e2 08 c7 44 24 14 88 13 00 00 81 ca 00 00 00 80 c7 44 24 10 00 00 00 00 c7 44 24 0c 00 00 00 00 <0f> b7 41 78 31 c9 89 44 24 08 c7 44 24 04 00 00 00 00 c7 04 24 [ 199.698884] EIP: [] ftdi_open+0x59/0xe0 [ftdi_sio] SS:ESP 0068:f515dcfc [ 199.698893] CR2: 0000000000000078 [ 199.698925] ---[ end trace 77c43ec023940cff ]--- Reported-and-tested-by: Ken Huang Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 5413bd500781..97355a15bbea 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1059,6 +1059,12 @@ int usb_serial_probe(struct usb_interface *interface, serial->attached = 1; } + /* Avoid race with tty_open and serial_install by setting the + * disconnected flag and not clearing it until all ports have been + * registered. + */ + serial->disconnected = 1; + if (get_free_serial(serial, num_ports, &minor) == NULL) { dev_err(&interface->dev, "No more free serial devices\n"); goto probe_error; @@ -1078,6 +1084,8 @@ int usb_serial_probe(struct usb_interface *interface, "continuing\n"); } + serial->disconnected = 0; + usb_serial_console_init(debug, minor); exit: -- cgit v1.2.3 From bb334e90cc3a2913906665ea966abd7f462b67c2 Mon Sep 17 00:00:00 2001 From: Alex He Date: Thu, 22 Mar 2012 15:06:59 +0800 Subject: xHCI: correct to print the true HSEE of USBCMD Correct the print of HSEE of USBCMD in xhci-dbg.c. Signed-off-by: Alex He Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-dbg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index e9b0f043455d..4b436f5a4171 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -119,7 +119,7 @@ static void xhci_print_command_reg(struct xhci_hcd *xhci) xhci_dbg(xhci, " Event Interrupts %s\n", (temp & CMD_EIE) ? "enabled " : "disabled"); xhci_dbg(xhci, " Host System Error Interrupts %s\n", - (temp & CMD_EIE) ? "enabled " : "disabled"); + (temp & CMD_HSEIE) ? "enabled " : "disabled"); xhci_dbg(xhci, " HC has %sfinished light reset\n", (temp & CMD_LRESET) ? "not " : ""); } -- cgit v1.2.3 From a46c46a1d752756ba159dd454b746a3fb735c4f5 Mon Sep 17 00:00:00 2001 From: Gerard Snitselaar Date: Fri, 16 Mar 2012 11:34:11 -0700 Subject: usb: xhci: fix section mismatch in linux-next xhci_unregister_pci() is called in xhci_hcd_init(). Signed-off-by: Gerard Snitselaar Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index ef98b38626fb..0d7b85135965 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -326,7 +326,7 @@ int __init xhci_register_pci(void) return pci_register_driver(&xhci_pci_driver); } -void __exit xhci_unregister_pci(void) +void xhci_unregister_pci(void) { pci_unregister_driver(&xhci_pci_driver); } -- cgit v1.2.3 From 4e833c0b87a30798e67f06120cecebef6ee9644c Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 15 Mar 2012 16:37:08 +0200 Subject: xhci: don't re-enable IE constantly While we're at that, define IMAN bitfield to aid readability. The interrupt enable bit should be set once on driver init, and we shouldn't need to continually re-enable it. Commit c21599a3 introduced a read of the irq_pending register, and that allows us to preserve the state of the IE bit. Before that commit, we were blindly writing 0x3 to the register. This patch should be backported to kernels as old as 2.6.36, or ones that contain the commit c21599a36165dbc78b380846b254017a548b9de5 "USB: xhci: Reduce reads and writes of interrupter registers". Signed-off-by: Felipe Balbi Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-ring.c | 2 +- drivers/usb/host/xhci.h | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 6bd9d53062eb..5ddc4ae85499 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2417,7 +2417,7 @@ hw_died: u32 irq_pending; /* Acknowledge the PCI interrupt */ irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending); - irq_pending |= 0x3; + irq_pending |= IMAN_IP; xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending); } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 91074fdab3eb..3d69c4b2b542 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -205,6 +205,10 @@ struct xhci_op_regs { #define CMD_PM_INDEX (1 << 11) /* bits 12:31 are reserved (and should be preserved on writes). */ +/* IMAN - Interrupt Management Register */ +#define IMAN_IP (1 << 1) +#define IMAN_IE (1 << 0) + /* USBSTS - USB status - status bitmasks */ /* HC not running - set to 1 when run/stop bit is cleared. */ #define STS_HALT XHCI_STS_HALT -- cgit v1.2.3 From 5af98bb06dee79d28c805f9fd0805ce791121784 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 16 Mar 2012 12:58:20 -0700 Subject: xhci: Warn when hosts don't halt. Eric Fu reports a problem with his VIA host controller fetching a zeroed event ring pointer on resume from suspend. The host should have been halted, but we can't be sure because that code ignores the return value from xhci_halt(). Print a warning when the host controller refuses to halt within XHCI_MAX_HALT_USEC (currently 16 seconds). (Update: it turns out that the VIA host controller is reporting a halted state when it fetches the zeroed event ring pointer. However, we still need this warning for other host controllers.) Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index e1963d4a430f..f68bc15d21e8 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -106,6 +106,9 @@ int xhci_halt(struct xhci_hcd *xhci) STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC); if (!ret) xhci->xhc_state |= XHCI_STATE_HALTED; + else + xhci_warn(xhci, "Host not halted after %u microseconds.\n", + XHCI_MAX_HALT_USEC); return ret; } -- cgit v1.2.3 From 159e1fcc9a60fc7daba23ee8fcdb99799de3fe84 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 16 Mar 2012 13:09:39 -0700 Subject: xhci: Don't write zeroed pointers to xHC registers. When xhci_mem_cleanup() is called, we can't be sure if the xHC is actually halted. We can ask the xHC to halt by writing to the RUN bit in the command register, but that might timeout due to a HW hang. If the host controller is still running, we should not write zeroed values to the event ring dequeue pointers or base tables, the DCBAA pointers, or the command ring pointers. Eric Fu reports his VIA VL800 host accesses the event ring pointers after a failed register restore on resume from suspend. The hypothesis is that the host never actually halted before the register write to change the event ring pointer to zero. Remove all writes of zeroed values to pointer registers in xhci_mem_cleanup(). Instead, make all callers of the function reset the host controller first, which will reset those registers to zero. xhci_mem_init() is the only caller that doesn't first halt and reset the host controller before calling xhci_mem_cleanup(). This should be backported to kernels as old as 2.6.32. Signed-off-by: Sarah Sharp Tested-by: Elric Fu Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-mem.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index cae4c6f2845a..68eaa908ac8e 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1796,11 +1796,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) int i; /* Free the Event Ring Segment Table and the actual Event Ring */ - if (xhci->ir_set) { - xhci_writel(xhci, 0, &xhci->ir_set->erst_size); - xhci_write_64(xhci, 0, &xhci->ir_set->erst_base); - xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue); - } size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries); if (xhci->erst.entries) dma_free_coherent(&pdev->dev, size, @@ -1812,7 +1807,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci->event_ring = NULL; xhci_dbg(xhci, "Freed event ring\n"); - xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring); if (xhci->cmd_ring) xhci_ring_free(xhci, xhci->cmd_ring); xhci->cmd_ring = NULL; @@ -1841,7 +1835,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci->medium_streams_pool = NULL; xhci_dbg(xhci, "Freed medium stream array pool\n"); - xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr); if (xhci->dcbaa) dma_free_coherent(&pdev->dev, sizeof(*xhci->dcbaa), xhci->dcbaa, xhci->dcbaa->dma); @@ -2459,6 +2452,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) fail: xhci_warn(xhci, "Couldn't initialize memory\n"); + xhci_halt(xhci); + xhci_reset(xhci); xhci_mem_cleanup(xhci); return -ENOMEM; } -- cgit v1.2.3 From fb3d85bc7193f23c9a564502df95564c49a32c91 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 16 Mar 2012 13:27:39 -0700 Subject: xhci: Restore event ring dequeue pointer on resume. The xhci_save_registers() function saved the event ring dequeue pointer in the s3 register structure, but xhci_restore_registers() never restored it. No other code in the xHCI successful resume path would ever restore it either. Fix that. This should be backported to kernels as old as 2.6.37, that contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI: PCI power management implementation". Signed-off-by: Sarah Sharp Tested-by: Elric Fu Cc: Andiry Xu Cc: stable@vger.kernel.org --- drivers/usb/host/xhci.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index f68bc15d21e8..d2222dc2f82e 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -684,6 +684,7 @@ static void xhci_restore_registers(struct xhci_hcd *xhci) xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control); xhci_writel(xhci, xhci->s3.erst_size, &xhci->ir_set->erst_size); xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base); + xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue); } static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci) -- cgit v1.2.3 From c7713e736526d8c9f6f87716fb90562a8ffaff2c Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 16 Mar 2012 13:19:35 -0700 Subject: xhci: Fix register save/restore order. The xHCI 1.0 spec errata released on June 13, 2011, changes the ordering that the xHCI registers are saved and restored in. It moves the interrupt pending (IMAN) and interrupt control (IMOD) registers to be saved and restored last. I believe that's because the host controller may attempt to fetch the event ring table when interrupts are re-enabled. Therefore we need to restore the event ring registers before we re-enable interrupts. This should be backported to kernels as old as 2.6.37, that contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI: PCI power management implementation" Signed-off-by: Sarah Sharp Tested-by: Elric Fu Cc: Andiry Xu Cc: stable@vger.kernel.org --- drivers/usb/host/xhci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index d2222dc2f82e..36641a7f2371 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -667,11 +667,11 @@ static void xhci_save_registers(struct xhci_hcd *xhci) xhci->s3.dev_nt = xhci_readl(xhci, &xhci->op_regs->dev_notification); xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); xhci->s3.config_reg = xhci_readl(xhci, &xhci->op_regs->config_reg); - xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending); - xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control); xhci->s3.erst_size = xhci_readl(xhci, &xhci->ir_set->erst_size); xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base); xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending); + xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control); } static void xhci_restore_registers(struct xhci_hcd *xhci) @@ -680,11 +680,11 @@ static void xhci_restore_registers(struct xhci_hcd *xhci) xhci_writel(xhci, xhci->s3.dev_nt, &xhci->op_regs->dev_notification); xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr); xhci_writel(xhci, xhci->s3.config_reg, &xhci->op_regs->config_reg); - xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending); - xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control); xhci_writel(xhci, xhci->s3.erst_size, &xhci->ir_set->erst_size); xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base); xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue); + xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending); + xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control); } static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci) -- cgit v1.2.3 From d8aec3dbdfd02627e198e7956ab4aaeba2a349fa Mon Sep 17 00:00:00 2001 From: Elric Fu Date: Mon, 26 Mar 2012 21:16:02 +0800 Subject: USB: fix bug of device descriptor got from superspeed device When the Seagate Goflex USB3.0 device is attached to VIA xHCI host, sometimes the device will downgrade mode to high speed. By the USB analyzer, I found the device finished the link training process and worked at superspeed mode. But the device descriptor got from the device shows the device works at 2.1. It is very strange and seems like the device controller of Seagate Goflex has a little confusion. The first 8 bytes of device descriptor should be: 12 01 00 03 00 00 00 09 But the first 8 bytes of wrong device descriptor are: 12 01 10 02 00 00 00 40 The wrong device descriptor caused the initialization of mass storage failed. After a while, the device would be recognized as a high speed device and works fine. This patch will warm reset the device to fix the issue after finding the bcdUSB field of device descriptor isn't 0x0300 but the speed mode of device is superspeed. This patch should be backported to kernels as old as 3.2, or ones that contain the commit 75d7cf72ab9fa01dc70877aa5c68e8ef477229dc "usbcore: refine warm reset logic". Signed-off-by: Elric Fu Acked-by: Andiry Xu Acked-by: Sergei Shtylyov Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/core/hub.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 28664eb7f555..a2aa9d652c67 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3163,6 +3163,22 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, if (retval) goto fail; + /* + * Some superspeed devices have finished the link training process + * and attached to a superspeed hub port, but the device descriptor + * got from those devices show they aren't superspeed devices. Warm + * reset the port attached by the devices can fix them. + */ + if ((udev->speed == USB_SPEED_SUPER) && + (le16_to_cpu(udev->descriptor.bcdUSB) < 0x0300)) { + dev_err(&udev->dev, "got a wrong device descriptor, " + "warm reset device\n"); + hub_port_reset(hub, port1, udev, + HUB_BH_RESET_TIME, true); + retval = -EINVAL; + goto fail; + } + if (udev->descriptor.bMaxPacketSize0 == 0xff || udev->speed == USB_SPEED_SUPER) i = 512; -- cgit v1.2.3 From 457a4f61f9bfc3ae76e5b49f30f25d86bb696f67 Mon Sep 17 00:00:00 2001 From: Elric Fu Date: Thu, 29 Mar 2012 15:47:50 +0800 Subject: xHCI: add XHCI_RESET_ON_RESUME quirk for VIA xHCI host The suspend operation of VIA xHCI host have some issues and hibernate operation works fine, so The XHCI_RESET_ON_RESUME quirk is added for it. This patch should base on "xHCI: Don't write zeroed pointer to xHC registers" that is released by Sarah. Otherwise, the host system error will ocurr in the hibernate operation process. This should be backported to stable kernels as old as 2.6.37, that contain the commit c877b3b2ad5cb9d4fe523c5496185cc328ff3ae9 "xhci: Add reset on resume quirk for asrock p67 host". Signed-off-by: Elric Fu Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-pci.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 0d7b85135965..7a856a767e77 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -95,6 +95,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_RESET_ON_RESUME; xhci_dbg(xhci, "QUIRK: Resetting on resume\n"); } + if (pdev->vendor == PCI_VENDOR_ID_VIA) + xhci->quirks |= XHCI_RESET_ON_RESUME; } /* called during probe() after chip reset completes */ -- cgit v1.2.3 From 3fc8206d3dca1550eb0a1f6e2a350881835954ba Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 28 Mar 2012 10:30:26 +0300 Subject: xHCI: use gfp flags from caller instead of GFP_ATOMIC The caller is allowed to specify the GFP flags for these functions. We should prefer their flags unless we have good reason. For example, if we take a spin_lock ourselves we'd need to use GFP_ATOMIC. But in this case it's safe to use the callers GFP flags. The callers all pass GFP_ATOMIC here, so this change doesn't affect how the kernel behaves but we may add other callers later and this is a cleanup. Signed-off-by: Dan Carpenter Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-ring.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 5ddc4ae85499..3d9422f16a20 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2734,7 +2734,7 @@ int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, urb->dev->speed == USB_SPEED_FULL) urb->interval /= 8; } - return xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); + return xhci_queue_bulk_tx(xhci, mem_flags, urb, slot_id, ep_index); } /* @@ -3514,7 +3514,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, } ep_ring->num_trbs_free_temp = ep_ring->num_trbs_free; - return xhci_queue_isoc_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); + return xhci_queue_isoc_tx(xhci, mem_flags, urb, slot_id, ep_index); } /**** Command Ring Operations ****/ -- cgit v1.2.3 From 95018a53f7653e791bba1f54c8d75d9cb700d1bd Mon Sep 17 00:00:00 2001 From: Alex He Date: Fri, 30 Mar 2012 10:21:38 +0800 Subject: xHCI: Correct the #define XHCI_LEGACY_DISABLE_SMI Re-define XHCI_LEGACY_DISABLE_SMI and used it in right way. All SMI enable bits will be cleared to zero and flag bits 29:31 are also cleared to zero. Other bits should be presvered as Table 146. This patch should be backported to kernels as old as 2.6.31. Signed-off-by: Alex He Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/host/pci-quirks.c | 10 +++++++--- drivers/usb/host/xhci-ext-caps.h | 5 +++-- 2 files changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 11de5f1be981..32dada8c8b4f 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -825,9 +825,13 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) } } - /* Disable any BIOS SMIs */ - writel(XHCI_LEGACY_DISABLE_SMI, - base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); + val = readl(base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); + /* Mask off (turn off) any enabled SMIs */ + val &= XHCI_LEGACY_DISABLE_SMI; + /* Mask all SMI events bits, RW1C */ + val |= XHCI_LEGACY_SMI_EVENTS; + /* Disable any BIOS SMIs and clear all SMI events*/ + writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); if (usb_is_intel_switchable_xhci(pdev)) usb_enable_xhci_ports(pdev); diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h index c7f33123d4c0..377f4242dabb 100644 --- a/drivers/usb/host/xhci-ext-caps.h +++ b/drivers/usb/host/xhci-ext-caps.h @@ -62,8 +62,9 @@ /* USB Legacy Support Control and Status Register - section 7.1.2 */ /* Add this offset, plus the value of xECP in HCCPARAMS to the base address */ #define XHCI_LEGACY_CONTROL_OFFSET (0x04) -/* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */ -#define XHCI_LEGACY_DISABLE_SMI ((0x3 << 1) + (0xff << 5) + (0x7 << 17)) +/* bits 1:3, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */ +#define XHCI_LEGACY_DISABLE_SMI ((0x7 << 1) + (0xff << 5) + (0x7 << 17)) +#define XHCI_LEGACY_SMI_EVENTS (0x7 << 29) /* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */ #define XHCI_L1C (1 << 16) -- cgit v1.2.3