From eea2172e6915a92cab1d3a79a4961e14a3c388ff Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 7 Dec 2012 00:15:23 +0100 Subject: drivers/w1/masters/ds1wm.c: use devm_ functions The various devm_ functions allocate memory that is released when a driver detaches. This patch uses these functions for data that is allocated in the probe function of a platform device and is only freed in the remove function. Signed-off-by: Julia Lawall Acked-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman --- drivers/w1/masters/ds1wm.c | 52 ++++++++++++++++------------------------------ 1 file changed, 18 insertions(+), 34 deletions(-) (limited to 'drivers/w1/masters') diff --git a/drivers/w1/masters/ds1wm.c b/drivers/w1/masters/ds1wm.c index 7c294f4dc0ed..96cab6ac2b4e 100644 --- a/drivers/w1/masters/ds1wm.c +++ b/drivers/w1/masters/ds1wm.c @@ -13,6 +13,7 @@ #include #include +#include #include #include #include @@ -459,43 +460,34 @@ static int ds1wm_probe(struct platform_device *pdev) if (!pdev) return -ENODEV; - ds1wm_data = kzalloc(sizeof(*ds1wm_data), GFP_KERNEL); + ds1wm_data = devm_kzalloc(&pdev->dev, sizeof(*ds1wm_data), GFP_KERNEL); if (!ds1wm_data) return -ENOMEM; platform_set_drvdata(pdev, ds1wm_data); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - ret = -ENXIO; - goto err0; - } - ds1wm_data->map = ioremap(res->start, resource_size(res)); - if (!ds1wm_data->map) { - ret = -ENOMEM; - goto err0; - } + if (!res) + return -ENXIO; + ds1wm_data->map = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!ds1wm_data->map) + return -ENOMEM; /* calculate bus shift from mem resource */ ds1wm_data->bus_shift = resource_size(res) >> 3; ds1wm_data->pdev = pdev; ds1wm_data->cell = mfd_get_cell(pdev); - if (!ds1wm_data->cell) { - ret = -ENODEV; - goto err1; - } + if (!ds1wm_data->cell) + return -ENODEV; plat = pdev->dev.platform_data; - if (!plat) { - ret = -ENODEV; - goto err1; - } + if (!plat) + return -ENODEV; res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { - ret = -ENXIO; - goto err1; - } + if (!res) + return -ENXIO; ds1wm_data->irq = res->start; ds1wm_data->int_en_reg_none = (plat->active_high ? DS1WM_INTEN_IAS : 0); ds1wm_data->reset_recover_delay = plat->reset_recover_delay; @@ -505,10 +497,10 @@ static int ds1wm_probe(struct platform_device *pdev) if (res->flags & IORESOURCE_IRQ_LOWEDGE) irq_set_irq_type(ds1wm_data->irq, IRQ_TYPE_EDGE_FALLING); - ret = request_irq(ds1wm_data->irq, ds1wm_isr, + ret = devm_request_irq(&pdev->dev, ds1wm_data->irq, ds1wm_isr, IRQF_DISABLED | IRQF_SHARED, "ds1wm", ds1wm_data); if (ret) - goto err1; + return ret; ds1wm_up(ds1wm_data); @@ -516,17 +508,12 @@ static int ds1wm_probe(struct platform_device *pdev) ret = w1_add_master_device(&ds1wm_master); if (ret) - goto err2; + goto err; return 0; -err2: +err: ds1wm_down(ds1wm_data); - free_irq(ds1wm_data->irq, ds1wm_data); -err1: - iounmap(ds1wm_data->map); -err0: - kfree(ds1wm_data); return ret; } @@ -560,9 +547,6 @@ static int ds1wm_remove(struct platform_device *pdev) w1_remove_master_device(&ds1wm_master); ds1wm_down(ds1wm_data); - free_irq(ds1wm_data->irq, ds1wm_data); - iounmap(ds1wm_data->map); - kfree(ds1wm_data); return 0; } -- cgit v1.2.3 From e5279ff6c9f5e950feac6e6f48621db912324c07 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 7 Dec 2012 00:15:24 +0100 Subject: drivers/w1/masters/mxc_w1.c: use devm_ functions The various devm_ functions allocate memory that is released when a driver detaches. This patch uses these functions for data that is allocated in the probe function of a platform device and is only freed in the remove function. At the same time, this fixes two faults. First, mdev, the result of kzalloc, was never freed. Second, on failure of ioremap, 0 was returned. This has been replaced by -EBUSY, which was the failure value for the call to request_mem_region, with which the call to ioremap has been combined. The warning message on failure of ioremap is dropped, because devm_request_and_ioremap already gives such messages on failure. Finally, the initial call to platform_get_resource is moved closer to the call to devm_request_and_ioremap, which takes care of checking whether its result is NULL, implying that a test on the result of this call to platform_get_resource is not needed. Signed-off-by: Julia Lawall Acked-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman --- drivers/w1/masters/mxc_w1.c | 49 +++++++++------------------------------------ 1 file changed, 10 insertions(+), 39 deletions(-) (limited to 'drivers/w1/masters') diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c index 708a25fc9961..372c8c0d54a0 100644 --- a/drivers/w1/masters/mxc_w1.c +++ b/drivers/w1/masters/mxc_w1.c @@ -109,34 +109,21 @@ static int mxc_w1_probe(struct platform_device *pdev) struct resource *res; int err = 0; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; - - mdev = kzalloc(sizeof(struct mxc_w1_device), GFP_KERNEL); + mdev = devm_kzalloc(&pdev->dev, sizeof(struct mxc_w1_device), + GFP_KERNEL); if (!mdev) return -ENOMEM; - mdev->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(mdev->clk)) { - err = PTR_ERR(mdev->clk); - goto failed_clk; - } + mdev->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(mdev->clk)) + return PTR_ERR(mdev->clk); mdev->clkdiv = (clk_get_rate(mdev->clk) / 1000000) - 1; - res = request_mem_region(res->start, resource_size(res), - "mxc_w1"); - if (!res) { - err = -EBUSY; - goto failed_req; - } - - mdev->regs = ioremap(res->start, resource_size(res)); - if (!mdev->regs) { - dev_err(&pdev->dev, "Cannot map mxc_w1 registers\n"); - goto failed_ioremap; - } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mdev->regs = devm_request_and_ioremap(&pdev->dev, res); + if (!mdev->regs) + return -EBUSY; clk_prepare_enable(mdev->clk); __raw_writeb(mdev->clkdiv, mdev->regs + MXC_W1_TIME_DIVIDER); @@ -148,20 +135,10 @@ static int mxc_w1_probe(struct platform_device *pdev) err = w1_add_master_device(&mdev->bus_master); if (err) - goto failed_add; + return err; platform_set_drvdata(pdev, mdev); return 0; - -failed_add: - iounmap(mdev->regs); -failed_ioremap: - release_mem_region(res->start, resource_size(res)); -failed_req: - clk_put(mdev->clk); -failed_clk: - kfree(mdev); - return err; } /* @@ -170,16 +147,10 @@ failed_clk: static int mxc_w1_remove(struct platform_device *pdev) { struct mxc_w1_device *mdev = platform_get_drvdata(pdev); - struct resource *res; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); w1_remove_master_device(&mdev->bus_master); - iounmap(mdev->regs); - release_mem_region(res->start, resource_size(res)); clk_disable_unprepare(mdev->clk); - clk_put(mdev->clk); platform_set_drvdata(pdev, NULL); -- cgit v1.2.3 From 06a8f1feb9e82e5b66f781ba3e39055e3f89a641 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sun, 27 Jan 2013 21:07:57 +0100 Subject: w1-gpio: fix section mismatch This fixes the following section mismatch: WARNING: drivers/w1/masters/w1-gpio.o(.data+0x188): Section mismatch in reference from the variable w1_gpio_driver to the function .init.text:w1_gpio_probe() The variable w1_gpio_driver references the function __init w1_gpio_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Hauke Mehrtens Acked-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman --- drivers/w1/masters/w1-gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/w1/masters') diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c index 85b363a5bd0f..d39dfa4cc235 100644 --- a/drivers/w1/masters/w1-gpio.c +++ b/drivers/w1/masters/w1-gpio.c @@ -72,7 +72,7 @@ static int w1_gpio_probe_dt(struct platform_device *pdev) return 0; } -static int __init w1_gpio_probe(struct platform_device *pdev) +static int w1_gpio_probe(struct platform_device *pdev) { struct w1_bus_master *master; struct w1_gpio_platform_data *pdata; -- cgit v1.2.3 From 9c95bb6f25ff802081125f24bf0c756252fa27b2 Mon Sep 17 00:00:00 2001 From: Michael Arndt Date: Sun, 17 Feb 2013 20:31:27 +0100 Subject: w1: ds2482: Added 1-Wire pull-up support to the driver Signed-off-by: Michael Arndt Acked-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman --- drivers/w1/masters/ds2482.c | 51 +++++++++++++++++++++++++++++++++++++++------ 1 file changed, 45 insertions(+), 6 deletions(-) (limited to 'drivers/w1/masters') diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c index 6429b9e9fb82..e033491fe308 100644 --- a/drivers/w1/masters/ds2482.c +++ b/drivers/w1/masters/ds2482.c @@ -51,10 +51,10 @@ * The top 4 bits always read 0. * To write, the top nibble must be the 1's compl. of the low nibble. */ -#define DS2482_REG_CFG_1WS 0x08 -#define DS2482_REG_CFG_SPU 0x04 -#define DS2482_REG_CFG_PPM 0x02 -#define DS2482_REG_CFG_APU 0x01 +#define DS2482_REG_CFG_1WS 0x08 /* 1-wire speed */ +#define DS2482_REG_CFG_SPU 0x04 /* strong pull-up */ +#define DS2482_REG_CFG_PPM 0x02 /* presence pulse masking */ +#define DS2482_REG_CFG_APU 0x01 /* active pull-up */ /** @@ -131,6 +131,17 @@ struct ds2482_data { }; +/** + * Helper to calculate values for configuration register + * @param conf the raw config value + * @return the value w/ complements that can be written to register + */ +static inline u8 ds2482_calculate_config(u8 conf) +{ + return conf | ((~conf & 0x0f) << 4); +} + + /** * Sets the read pointer. * @param pdev The ds2482 client pointer @@ -399,7 +410,7 @@ static u8 ds2482_w1_reset_bus(void *data) /* If the chip did reset since detect, re-config it */ if (err & DS2482_REG_STS_RST) ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG, - 0xF0); + ds2482_calculate_config(0x00)); } mutex_unlock(&pdev->access_lock); @@ -407,6 +418,32 @@ static u8 ds2482_w1_reset_bus(void *data) return retval; } +static u8 ds2482_w1_set_pullup(void *data, int delay) +{ + struct ds2482_w1_chan *pchan = data; + struct ds2482_data *pdev = pchan->pdev; + u8 retval = 1; + + /* if delay is non-zero activate the pullup, + * the strong pullup will be automatically deactivated + * by the master, so do not explicitly deactive it + */ + if (delay) { + /* both waits are crucial, otherwise devices might not be + * powered long enough, causing e.g. a w1_therm sensor to + * provide wrong conversion results + */ + ds2482_wait_1wire_idle(pdev); + /* note: it seems like both SPU and APU have to be set! */ + retval = ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG, + ds2482_calculate_config(DS2482_REG_CFG_SPU | + DS2482_REG_CFG_APU)); + ds2482_wait_1wire_idle(pdev); + } + + return retval; +} + static int ds2482_probe(struct i2c_client *client, const struct i2c_device_id *id) @@ -452,7 +489,8 @@ static int ds2482_probe(struct i2c_client *client, data->w1_count = 8; /* Set all config items to 0 (off) */ - ds2482_send_cmd_data(data, DS2482_CMD_WRITE_CONFIG, 0xF0); + ds2482_send_cmd_data(data, DS2482_CMD_WRITE_CONFIG, + ds2482_calculate_config(0x00)); mutex_init(&data->access_lock); @@ -468,6 +506,7 @@ static int ds2482_probe(struct i2c_client *client, data->w1_ch[idx].w1_bm.touch_bit = ds2482_w1_touch_bit; data->w1_ch[idx].w1_bm.triplet = ds2482_w1_triplet; data->w1_ch[idx].w1_bm.reset_bus = ds2482_w1_reset_bus; + data->w1_ch[idx].w1_bm.set_pullup = ds2482_w1_set_pullup; err = w1_add_master_device(&data->w1_ch[idx].w1_bm); if (err) { -- cgit v1.2.3